powerpc: Remove arch/ppc and include/asm-ppc

All the maintained platforms are now in arch/powerpc, so the old
arch/ppc stuff can now go away.

Acked-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Becky Bruce <becky.bruce@freescale.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Grant Likely <grant.likely@secretlab.ca>
Acked-by: Jochen Friedrich <jochen@scram.de>
Acked-by: John Linn <john.linn@xilinx.com>
Acked-by: Jon Loeliger <jdl@freescale.com>
Acked-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: Kumar Gala <galak@kernel.crashing.org>
Acked-by: Olof Johansson <olof@lixom.net>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Acked-by: Scott Wood <scottwood@freescale.com>
Acked-by: Sean MacLennan <smaclennan@pikatech.com>
Acked-by: Segher Boessenkool <segher@kernel.crashing.org>
Acked-by: Stefan Roese <sr@denx.de>
Acked-by: Stephen Neuendorffer <stephen.neuendorffer@xilinx.com>
Acked-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 0 insertions, 104 deletions

diff --git a/arch/ppc/platforms/4xx/xparameters/xparameters.h b/arch/ppc/platforms/4xx/xparameters/xparameters.h
deleted file mode 100644
index 650888b00fb0..000000000000
--- a/arch/ppc/platforms/4xx/xparameters/xparameters.h
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * arch/ppc/platforms/4xx/xparameters/xparameters.h
- *
- * This file includes the correct xparameters.h for the CONFIG'ed board plus
- * fixups to translate board specific XPAR values to a common set of names
- *
- * Author: MontaVista Software, Inc.
- *         source@mvista.com
- *
- * 2004 (c) MontaVista Software, Inc.  This file is licensed under the terms
- * of the GNU General Public License version 2.  This program is licensed
- * "as is" without any warranty of any kind, whether express or implied.
- */
-
-
-#if defined(CONFIG_XILINX_ML300)
-  #include "xparameters_ml300.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_DCR_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#elif defined(CONFIG_XILINX_ML403)
-  #include "xparameters_ml403.h"
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_PLAYBACK_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_PLAYBACK_INTERRUPT_INTR
-  #define XPAR_INTC_0_AC97_CONTROLLER_REF_0_RECORD_VEC_ID \
-	XPAR_OPB_INTC_0_OPB_AC97_CONTROLLER_REF_0_RECORD_INTERRUPT_INTR
-#else
-  /* Add other board xparameter includes here before the #else */
-  #error No xparameters_*.h file included
-#endif
-
-#ifndef SERIAL_PORT_DFNS
-  /* zImage serial port definitions */
-  #define RS_TABLE_SIZE 1
-  #define SERIAL_PORT_DFNS {						\
-	.baud_base	 = XPAR_UARTNS550_0_CLOCK_FREQ_HZ/16,		\
-	.irq		 = XPAR_INTC_0_UARTNS550_0_VEC_ID,		\
-	.flags		 = ASYNC_BOOT_AUTOCONF,				\
-	.iomem_base	 = (u8 *)XPAR_UARTNS550_0_BASEADDR + 3,		\
-	.iomem_reg_shift = 2,						\
-	.io_type	 = SERIAL_IO_MEM,				\
-  },
-#endif
-
-/*
- * A few reasonable defaults for the #defines which could be missing depending
- * on the IP version or variant (e.g. OPB vs PLB)
- */
-
-#ifndef XPAR_EMAC_0_CAM_EXIST
-#define XPAR_EMAC_0_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_JUMBO_EXIST
-#define XPAR_EMAC_0_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_0_TX_DRE_TYPE
-#define XPAR_EMAC_0_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_RX_DRE_TYPE
-#define XPAR_EMAC_0_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_0_TX_INCLUDE_CSUM
-#define XPAR_EMAC_0_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_0_RX_INCLUDE_CSUM
-#define XPAR_EMAC_0_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_EMAC_1_CAM_EXIST
-#define XPAR_EMAC_1_CAM_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_JUMBO_EXIST
-#define XPAR_EMAC_1_JUMBO_EXIST 0
-#endif
-#ifndef XPAR_EMAC_1_TX_DRE_TYPE
-#define XPAR_EMAC_1_TX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_RX_DRE_TYPE
-#define XPAR_EMAC_1_RX_DRE_TYPE 0
-#endif
-#ifndef XPAR_EMAC_1_TX_INCLUDE_CSUM
-#define XPAR_EMAC_1_TX_INCLUDE_CSUM 0
-#endif
-#ifndef XPAR_EMAC_1_RX_INCLUDE_CSUM
-#define XPAR_EMAC_1_RX_INCLUDE_CSUM 0
-#endif
-
-#ifndef XPAR_GPIO_0_IS_DUAL
-#define XPAR_GPIO_0_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_1_IS_DUAL
-#define XPAR_GPIO_1_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_2_IS_DUAL
-#define XPAR_GPIO_2_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_3_IS_DUAL
-#define XPAR_GPIO_3_IS_DUAL 0
-#endif
-#ifndef XPAR_GPIO_4_IS_DUAL
-#define XPAR_GPIO_4_IS_DUAL 0
-#endif
-