Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/wireless/ath/ath9k/Kconfig
	drivers/net/xen-netback/netback.c
	net/batman-adv/bat_iv_ogm.c
	net/wireless/nl80211.c

The ath9k Kconfig conflict was a change of a Kconfig option name right
next to the deletion of another option.

The xen-netback conflict was overlapping changes involving the
handling of the notify list in xen_netbk_rx_action().

Batman conflict resolution provided by Antonio Quartulli, basically
keep everything in both conflict hunks.

The nl80211 conflict is a little more involved.  In 'net' we added a
dynamic memory allocation to nl80211_dump_wiphy() to fix a race that
Linus reported.  Meanwhile in 'net-next' the handlers were converted
to use pre and post doit handlers which use a flag to determine
whether to hold the RTNL mutex around the operation.

However, the dump handlers to not use this logic.  Instead they have
to explicitly do the locking.  There were apparent bugs in the
conversion of nl80211_dump_wiphy() in that we were not dropping the
RTNL mutex in all the return paths, and it seems we very much should
be doing so.  So I fixed that whilst handling the overlapping changes.

To simplify the initial returns, I take the RTNL mutex after we try
to allocate 'tb'.

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 41 insertions, 57 deletions

diff --git a/arch/mips/include/uapi/asm/kvm.h b/arch/mips/include/uapi/asm/kvm.h
index 3f424f5217da..f09ff5ae2059 100644
--- a/arch/mips/include/uapi/asm/kvm.h
+++ b/arch/mips/include/uapi/asm/kvm.h
@@ -58,56 +58,53 @@ struct kvm_fpu {
  *  bits[2..0]   - Register 'sel' index.
  *  bits[7..3]   - Register 'rd'  index.
  *  bits[15..8]  - Must be zero.
- *  bits[63..16] - 1 -> CP0 registers.
+ *  bits[31..16] - 1 -> CP0 registers.
+ *  bits[51..32] - Must be zero.
+ *  bits[63..52] - As per linux/kvm.h
  *
  * Other sets registers may be added in the future.  Each set would
- * have its own identifier in bits[63..16].
- *
- * The addr field of struct kvm_one_reg must point to an aligned
- * 64-bit wide location.  For registers that are narrower than
- * 64-bits, the value is stored in the low order bits of the location,
- * and sign extended to 64-bits.
+ * have its own identifier in bits[31..16].
  *
  * The registers defined in struct kvm_regs are also accessible, the
  * id values for these are below.
  */
 
-#define KVM_REG_MIPS_R0 0
-#define KVM_REG_MIPS_R1 1
-#define KVM_REG_MIPS_R2 2
-#define KVM_REG_MIPS_R3 3
-#define KVM_REG_MIPS_R4 4
-#define KVM_REG_MIPS_R5 5
-#define KVM_REG_MIPS_R6 6
-#define KVM_REG_MIPS_R7 7
-#define KVM_REG_MIPS_R8 8
-#define KVM_REG_MIPS_R9 9
-#define KVM_REG_MIPS_R10 10
-#define KVM_REG_MIPS_R11 11
-#define KVM_REG_MIPS_R12 12
-#define KVM_REG_MIPS_R13 13
-#define KVM_REG_MIPS_R14 14
-#define KVM_REG_MIPS_R15 15
-#define KVM_REG_MIPS_R16 16
-#define KVM_REG_MIPS_R17 17
-#define KVM_REG_MIPS_R18 18
-#define KVM_REG_MIPS_R19 19
-#define KVM_REG_MIPS_R20 20
-#define KVM_REG_MIPS_R21 21
-#define KVM_REG_MIPS_R22 22
-#define KVM_REG_MIPS_R23 23
-#define KVM_REG_MIPS_R24 24
-#define KVM_REG_MIPS_R25 25
-#define KVM_REG_MIPS_R26 26
-#define KVM_REG_MIPS_R27 27
-#define KVM_REG_MIPS_R28 28
-#define KVM_REG_MIPS_R29 29
-#define KVM_REG_MIPS_R30 30
-#define KVM_REG_MIPS_R31 31
+#define KVM_REG_MIPS_R0 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 0)
+#define KVM_REG_MIPS_R1 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 1)
+#define KVM_REG_MIPS_R2 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 2)
+#define KVM_REG_MIPS_R3 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 3)
+#define KVM_REG_MIPS_R4 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 4)
+#define KVM_REG_MIPS_R5 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 5)
+#define KVM_REG_MIPS_R6 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 6)
+#define KVM_REG_MIPS_R7 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 7)
+#define KVM_REG_MIPS_R8 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 8)
+#define KVM_REG_MIPS_R9 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 9)
+#define KVM_REG_MIPS_R10 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 10)
+#define KVM_REG_MIPS_R11 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 11)
+#define KVM_REG_MIPS_R12 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 12)
+#define KVM_REG_MIPS_R13 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 13)
+#define KVM_REG_MIPS_R14 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 14)
+#define KVM_REG_MIPS_R15 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 15)
+#define KVM_REG_MIPS_R16 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 16)
+#define KVM_REG_MIPS_R17 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 17)
+#define KVM_REG_MIPS_R18 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 18)
+#define KVM_REG_MIPS_R19 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 19)
+#define KVM_REG_MIPS_R20 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 20)
+#define KVM_REG_MIPS_R21 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 21)
+#define KVM_REG_MIPS_R22 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 22)
+#define KVM_REG_MIPS_R23 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 23)
+#define KVM_REG_MIPS_R24 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 24)
+#define KVM_REG_MIPS_R25 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 25)
+#define KVM_REG_MIPS_R26 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 26)
+#define KVM_REG_MIPS_R27 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 27)
+#define KVM_REG_MIPS_R28 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 28)
+#define KVM_REG_MIPS_R29 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 29)
+#define KVM_REG_MIPS_R30 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 30)
+#define KVM_REG_MIPS_R31 (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 31)
 
-#define KVM_REG_MIPS_HI 32
-#define KVM_REG_MIPS_LO 33
-#define KVM_REG_MIPS_PC 34
+#define KVM_REG_MIPS_HI (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 32)
+#define KVM_REG_MIPS_LO (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 33)
+#define KVM_REG_MIPS_PC (KVM_REG_MIPS | KVM_REG_SIZE_U64 | 34)
 
 /*
  * KVM MIPS specific structures and definitions
diff --git a/arch/mips/include/uapi/asm/ptrace.h b/arch/mips/include/uapi/asm/ptrace.h
index 4d58d8468705..b26f7e317279 100644
--- a/arch/mips/include/uapi/asm/ptrace.h
+++ b/arch/mips/include/uapi/asm/ptrace.h
@@ -22,16 +22,12 @@
 #define DSP_CONTROL	77
 #define ACX		78
 
+#ifndef __KERNEL__
 /*
  * This struct defines the way the registers are stored on the stack during a
  * system call/exception. As usual the registers k0/k1 aren't being saved.
  */
 struct pt_regs {
-#ifdef CONFIG_32BIT
-	/* Pad bytes for argument save space on the stack. */
-	unsigned long pad0[6];
-#endif
-
 	/* Saved main processor registers. */
 	unsigned long regs[32];
 
@@ -39,20 +35,11 @@ struct pt_regs {
 	unsigned long cp0_status;
 	unsigned long hi;
 	unsigned long lo;
-#ifdef CONFIG_CPU_HAS_SMARTMIPS
-	unsigned long acx;
-#endif
 	unsigned long cp0_badvaddr;
 	unsigned long cp0_cause;
 	unsigned long cp0_epc;
-#ifdef CONFIG_MIPS_MT_SMTC
-	unsigned long cp0_tcstatus;
-#endif /* CONFIG_MIPS_MT_SMTC */
-#ifdef CONFIG_CPU_CAVIUM_OCTEON
-	unsigned long long mpl[3];	  /* MTM{0,1,2} */
-	unsigned long long mtp[3];	  /* MTP{0,1,2} */
-#endif
 } __attribute__ ((aligned (8)));
+#endif /* __KERNEL__ */
 
 /* Arbitrarily choose the same ptrace numbers as used by the Sparc code. */
 #define PTRACE_GETREGS		12