aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-sa1100
diff options
context:
space:
mode:
authorDmitry Eremin-Solenikov <dbaryshkov@gmail.com>2015-01-15 02:32:26 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2015-01-29 15:24:49 +0000
commita0ea298d325616b58760c5182705df76912e0d73 (patch)
tree8f3c76cb949ff98edfcf097d9650c1c102bd6d1d /arch/arm/mach-sa1100
parenta82be3f0f1a4a03ec43750b12cb48871ec2a2e28 (diff)
downloadlinux-linaro-stable-a0ea298d325616b58760c5182705df76912e0d73.tar.gz
ARM: 8281/1: sa1100: move GPIO-related IRQ code to gpio driver
As a part of driver consolidation, move GPIO-related IRQ code to drivers/gpio/gpio-sa1100.c. The code does not use GPIOLIB_IRQCHIP (yet), because sa1100 does not have a device for gpios, which is a requirement for GPIOLIB_IRQCHIP. This will be the next step. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-sa1100')
-rw-r--r--arch/arm/mach-sa1100/irq.c174
1 files changed, 0 insertions, 174 deletions
diff --git a/arch/arm/mach-sa1100/irq.c b/arch/arm/mach-sa1100/irq.c
index a9dfe8e16d95..a7d116af4a4f 100644
--- a/arch/arm/mach-sa1100/irq.c
+++ b/arch/arm/mach-sa1100/irq.c
@@ -80,138 +80,6 @@ static struct irq_domain_ops sa1100_normal_irqdomain_ops = {
static struct irq_domain *sa1100_normal_irqdomain;
-/*
- * SA1100 GPIO edge detection for IRQs:
- * IRQs are generated on Falling-Edge, Rising-Edge, or both.
- * Use this instead of directly setting GRER/GFER.
- */
-static int GPIO_IRQ_rising_edge;
-static int GPIO_IRQ_falling_edge;
-static int GPIO_IRQ_mask;
-
-static int sa1100_gpio_type(struct irq_data *d, unsigned int type)
-{
- unsigned int mask;
-
- mask = BIT(d->hwirq);
-
- if (type == IRQ_TYPE_PROBE) {
- if ((GPIO_IRQ_rising_edge | GPIO_IRQ_falling_edge) & mask)
- return 0;
- type = IRQ_TYPE_EDGE_RISING | IRQ_TYPE_EDGE_FALLING;
- }
-
- if (type & IRQ_TYPE_EDGE_RISING) {
- GPIO_IRQ_rising_edge |= mask;
- } else
- GPIO_IRQ_rising_edge &= ~mask;
- if (type & IRQ_TYPE_EDGE_FALLING) {
- GPIO_IRQ_falling_edge |= mask;
- } else
- GPIO_IRQ_falling_edge &= ~mask;
-
- GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
- GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-
- return 0;
-}
-
-/*
- * GPIO IRQs must be acknowledged.
- */
-static void sa1100_gpio_ack(struct irq_data *d)
-{
- GEDR = BIT(d->hwirq);
-}
-
-static void sa1100_gpio_mask(struct irq_data *d)
-{
- unsigned int mask = BIT(d->hwirq);
-
- GPIO_IRQ_mask &= ~mask;
-
- GRER &= ~mask;
- GFER &= ~mask;
-}
-
-static void sa1100_gpio_unmask(struct irq_data *d)
-{
- unsigned int mask = BIT(d->hwirq);
-
- GPIO_IRQ_mask |= mask;
-
- GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
- GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-}
-
-static int sa1100_gpio_wake(struct irq_data *d, unsigned int on)
-{
- if (on)
- PWER |= BIT(d->hwirq);
- else
- PWER &= ~BIT(d->hwirq);
- return 0;
-}
-
-/*
- * This is for GPIO IRQs
- */
-static struct irq_chip sa1100_gpio_chip = {
- .name = "GPIO",
- .irq_ack = sa1100_gpio_ack,
- .irq_mask = sa1100_gpio_mask,
- .irq_unmask = sa1100_gpio_unmask,
- .irq_set_type = sa1100_gpio_type,
- .irq_set_wake = sa1100_gpio_wake,
-};
-
-static int sa1100_gpio_irqdomain_map(struct irq_domain *d,
- unsigned int irq, irq_hw_number_t hwirq)
-{
- irq_set_chip_and_handler(irq, &sa1100_gpio_chip,
- handle_edge_irq);
- set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
-
- return 0;
-}
-
-static struct irq_domain_ops sa1100_gpio_irqdomain_ops = {
- .map = sa1100_gpio_irqdomain_map,
- .xlate = irq_domain_xlate_onetwocell,
-};
-
-static struct irq_domain *sa1100_gpio_irqdomain;
-
-/*
- * IRQ 0-11 (GPIO) handler. We enter here with the
- * irq_controller_lock held, and IRQs disabled. Decode the IRQ
- * and call the handler.
- */
-static void
-sa1100_gpio_handler(unsigned int irq, struct irq_desc *desc)
-{
- unsigned int mask;
-
- mask = GEDR;
- do {
- /*
- * clear down all currently active IRQ sources.
- * We will be processing them all.
- */
- GEDR = mask;
-
- irq = IRQ_GPIO0;
- do {
- if (mask & 1)
- generic_handle_irq(irq);
- mask >>= 1;
- irq++;
- } while (mask);
-
- mask = GEDR;
- } while (mask);
-}
-
static struct resource irq_resource =
DEFINE_RES_MEM_NAMED(0x90050000, SZ_64K, "irqs");
@@ -238,17 +106,6 @@ static int sa1100irq_suspend(void)
IC_GPIO6|IC_GPIO5|IC_GPIO4|IC_GPIO3|IC_GPIO2|
IC_GPIO1|IC_GPIO0);
- /*
- * Set the appropriate edges for wakeup.
- */
- GRER = PWER & GPIO_IRQ_rising_edge;
- GFER = PWER & GPIO_IRQ_falling_edge;
-
- /*
- * Clear any pending GPIO interrupts.
- */
- GEDR = GEDR;
-
return 0;
}
@@ -260,9 +117,6 @@ static void sa1100irq_resume(void)
ICCR = st->iccr;
ICLR = st->iclr;
- GRER = GPIO_IRQ_rising_edge & GPIO_IRQ_mask;
- GFER = GPIO_IRQ_falling_edge & GPIO_IRQ_mask;
-
ICMR = st->icmr;
}
}
@@ -307,11 +161,6 @@ void __init sa1100_init_irq(void)
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
- /* clear all GPIO edge detects */
- GFER = 0;
- GRER = 0;
- GEDR = -1;
-
/*
* Whatever the doc says, this has to be set for the wait-on-irq
* instruction to work... on a SA1100 rev 9 at least.
@@ -322,29 +171,6 @@ void __init sa1100_init_irq(void)
32, IRQ_GPIO0_SC,
&sa1100_normal_irqdomain_ops, NULL);
- sa1100_gpio_irqdomain = irq_domain_add_simple(NULL,
- 28, IRQ_GPIO0,
- &sa1100_gpio_irqdomain_ops, NULL);
-
- /*
- * Install handlers for GPIO 0-10 edge detect interrupts
- */
- irq_set_chained_handler(IRQ_GPIO0_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO1_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO2_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO3_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO4_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO5_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO6_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO7_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO8_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO9_SC, sa1100_gpio_handler);
- irq_set_chained_handler(IRQ_GPIO10_SC, sa1100_gpio_handler);
- /*
- * Install handler for GPIO 11-27 edge detect interrupts
- */
- irq_set_chained_handler(IRQ_GPIO11_27, sa1100_gpio_handler);
-
set_handle_irq(sa1100_handle_irq);
sa1100_init_gpio();