aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-exynos
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-06-20 22:36:11 +0200
committerArnd Bergmann <arnd@arndb.de>2013-06-20 22:36:11 +0200
commitff8fa4e287b0d57d44eeb8aad43c38f92efcf398 (patch)
tree4af3ac0f8b8e56fb6ec570474e8fb693cec9e4cb /arch/arm/mach-exynos
parent402bf90df519767559ce3aa9b6d783626d6326ad (diff)
parent564d06b1266ee62c9b47eab8305755e5ff6e38d5 (diff)
downloadlinux-linaro-stable-ff8fa4e287b0d57d44eeb8aad43c38f92efcf398.tar.gz
Merge tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/soc
From Kukjin Kim: cleanup and removing dead code for only support DT for exynos - remove board file for exynos - remove legacy files which are not used anymore - decouple ARCH_EXYNOS from PLAT_S5P * tag 'remove-nondt-exynos-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung: (35 commits) ARM: EXYNOS: Remove remaining dead code after non-DT support removal ARM: EXYNOS: Remove legacy L2X0 initialization ARM: EXYNOS: Use exynos_init_io() as map_io callback ARM: EXYNOS: Remove custom init_irq callbacks ARM: EXYNOS: Remove mach/regs-usb-phy.h header thermal: exynos: Support both EXYNOS4X12 SoCs ARM: EXYNOS: Remove unused base addresses from mach/map.h header ARM: EXYNOS: Remove mach/irqs.h header ARM: EXYNOS: Select SPARSE_IRQ for Exynos ARM: SAMSUNG: Make legacy MFC support code depend on SAMSUNG_ATAGS ARM: EXYNOS: Remove mach/regs-gpio.h header ARM: EXYNOS: Remove mach/gpio.h ARM: EXYNOS: Remove setup-i2c0.c ARM: EXYNOS: Do not select legacy Kconfig symbols any more ARM: SAMSUNG: Include most of mach/ headers conditionally ARM: EXYNOS: Decouple ARCH_EXYNOS from PLAT_S5P USB: Check for ARCH_EXYNOS separately platform: Check for ARCH_EXYNOS separately ARM: SAMSUNG: Compile legacy IRQ and GPIO PM code only with ATAGS support ARM: EXYNOS: Provide compatibility stubs for PM code in pm-core.h header ... Conflicts: arch/arm/mach-exynos/Kconfig Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/mach-exynos')
-rw-r--r--arch/arm/mach-exynos/Kconfig340
-rw-r--r--arch/arm/mach-exynos/Makefile33
-rw-r--r--arch/arm/mach-exynos/common.c547
-rw-r--r--arch/arm/mach-exynos/common.h4
-rw-r--r--arch/arm/mach-exynos/dev-ahci.c255
-rw-r--r--arch/arm/mach-exynos/dev-audio.c254
-rw-r--r--arch/arm/mach-exynos/dev-ohci.c52
-rw-r--r--arch/arm/mach-exynos/dev-uart.c55
-rw-r--r--arch/arm/mach-exynos/dma.c322
-rw-r--r--arch/arm/mach-exynos/firmware.c22
-rw-r--r--arch/arm/mach-exynos/include/mach/gpio.h289
-rw-r--r--arch/arm/mach-exynos/include/mach/irqs.h476
-rw-r--r--arch/arm/mach-exynos/include/mach/map.h214
-rw-r--r--arch/arm/mach-exynos/include/mach/pm-core.h12
-rw-r--r--arch/arm/mach-exynos/include/mach/regs-gpio.h40
-rw-r--r--arch/arm/mach-exynos/include/mach/regs-usb-phy.h74
-rw-r--r--arch/arm/mach-exynos/mach-armlex4210.c207
-rw-r--r--arch/arm/mach-exynos/mach-exynos4-dt.c8
-rw-r--r--arch/arm/mach-exynos/mach-exynos5-dt.c8
-rw-r--r--arch/arm/mach-exynos/mach-nuri.c1388
-rw-r--r--arch/arm/mach-exynos/mach-origen.c823
-rw-r--r--arch/arm/mach-exynos/mach-smdk4x12.c396
-rw-r--r--arch/arm/mach-exynos/mach-smdkv310.c444
-rw-r--r--arch/arm/mach-exynos/mach-universal_c210.c1159
-rw-r--r--arch/arm/mach-exynos/pm.c1
-rw-r--r--arch/arm/mach-exynos/pm_domains.c101
-rw-r--r--arch/arm/mach-exynos/setup-fimc.c44
-rw-r--r--arch/arm/mach-exynos/setup-fimd0.c43
-rw-r--r--arch/arm/mach-exynos/setup-i2c0.c29
-rw-r--r--arch/arm/mach-exynos/setup-i2c1.c23
-rw-r--r--arch/arm/mach-exynos/setup-i2c2.c23
-rw-r--r--arch/arm/mach-exynos/setup-i2c3.c23
-rw-r--r--arch/arm/mach-exynos/setup-i2c4.c23
-rw-r--r--arch/arm/mach-exynos/setup-i2c5.c23
-rw-r--r--arch/arm/mach-exynos/setup-i2c6.c23
-rw-r--r--arch/arm/mach-exynos/setup-i2c7.c23
-rw-r--r--arch/arm/mach-exynos/setup-keypad.c36
-rw-r--r--arch/arm/mach-exynos/setup-sdhci-gpio.c152
-rw-r--r--arch/arm/mach-exynos/setup-spi.c45
-rw-r--r--arch/arm/mach-exynos/setup-usb-phy.c223
40 files changed, 31 insertions, 8226 deletions
diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig
index e51d99060d33..1e0e3999c17a 100644
--- a/arch/arm/mach-exynos/Kconfig
+++ b/arch/arm/mach-exynos/Kconfig
@@ -14,6 +14,7 @@ menu "SAMSUNG EXYNOS SoCs Support"
config ARCH_EXYNOS4
bool "SAMSUNG EXYNOS4"
default y
+ select GIC_NON_BANKED
select HAVE_ARM_SCU if SMP
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
@@ -89,329 +90,11 @@ config SOC_EXYNOS5440
help
Enable EXYNOS5440 SoC support
-config EXYNOS_ATAGS
- bool "ATAGS based boot for EXYNOS (deprecated)"
- depends on !ARCH_MULTIPLATFORM
- depends on ATAGS
- default y
- help
- The EXYNOS platform is moving towards being completely probed
- through device tree. This enables support for board files using
- the traditional ATAGS boot format.
- Note that this option is not available for multiplatform builds.
-
-if EXYNOS_ATAGS
-
-config EXYNOS_DEV_DMA
- bool
- help
- Compile in amba device definitions for DMA controller
-
-config EXYNOS4_DEV_AHCI
- bool
- help
- Compile in platform device definitions for AHCI
-
-config EXYNOS4_SETUP_FIMD0
- bool
- help
- Common setup code for FIMD0.
-
-config EXYNOS4_DEV_USB_OHCI
- bool
- help
- Compile in platform device definition for USB OHCI
-
-config EXYNOS4_SETUP_I2C1
- bool
- help
- Common setup code for i2c bus 1.
-
-config EXYNOS4_SETUP_I2C2
- bool
- help
- Common setup code for i2c bus 2.
-
-config EXYNOS4_SETUP_I2C3
- bool
- help
- Common setup code for i2c bus 3.
-
-config EXYNOS4_SETUP_I2C4
- bool
- help
- Common setup code for i2c bus 4.
-
-config EXYNOS4_SETUP_I2C5
- bool
- help
- Common setup code for i2c bus 5.
-
-config EXYNOS4_SETUP_I2C6
- bool
- help
- Common setup code for i2c bus 6.
-
-config EXYNOS4_SETUP_I2C7
- bool
- help
- Common setup code for i2c bus 7.
-
-config EXYNOS4_SETUP_KEYPAD
- bool
- help
- Common setup code for keypad.
-
-config EXYNOS4_SETUP_SDHCI
- bool
- select EXYNOS4_SETUP_SDHCI_GPIO
- help
- Internal helper functions for EXYNOS4 based SDHCI systems.
-
-config EXYNOS4_SETUP_SDHCI_GPIO
- bool
- help
- Common setup code for SDHCI gpio.
-
-config EXYNOS4_SETUP_FIMC
- bool
- help
- Common setup code for the camera interfaces.
-
-config EXYNOS4_SETUP_USB_PHY
- bool
- help
- Common setup code for USB PHY controller
-
-config EXYNOS_SETUP_SPI
- bool
- help
- Common setup code for SPI GPIO configurations.
-
-# machine support
-
-if ARCH_EXYNOS4
-
-comment "EXYNOS4210 Boards"
-
-config MACH_SMDKC210
- bool "SMDKC210"
- select MACH_SMDKV310
- help
- Machine support for Samsung SMDKC210
-
-config MACH_SMDKV310
- bool "SMDKV310"
- select CPU_EXYNOS4210
- select EXYNOS4_DEV_AHCI
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C24XX_PWM
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC1
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_TV
- select S5P_DEV_USB_EHCI
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- help
- Machine support for Samsung SMDKV310
-
-config MACH_ARMLEX4210
- bool "ARMLEX4210"
- select CPU_EXYNOS4210
- select EXYNOS4_DEV_AHCI
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS_DEV_DMA
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_RTC
- select S3C_DEV_WDT
- help
- Machine support for Samsung ARMLEX4210 based on EXYNOS4210
-
-config MACH_UNIVERSAL_C210
- bool "Mobile UNIVERSAL_C210 Board"
- select CLKSRC_MMIO
- select CLKSRC_SAMSUNG_PWM
- select CPU_EXYNOS4210
- select EXYNOS4_SETUP_FIMC
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S3C_DEV_USB_HSOTG
- select S5P_DEV_CSIS0
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_ONENAND
- select S5P_DEV_TV
- select S5P_GPIO_INT
- select S5P_SETUP_MIPIPHY
- help
- Machine support for Samsung Mobile Universal S5PC210 Reference
- Board.
-
-config MACH_NURI
- bool "Mobile NURI Board"
- select CPU_EXYNOS4210
- select EXYNOS4_SETUP_FIMC
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C5
- select EXYNOS4_SETUP_I2C6
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C5
- select S3C_DEV_I2C6
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_CSIS0
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_USB_EHCI
- select S5P_GPIO_INT
- select S5P_SETUP_MIPIPHY
- select SAMSUNG_DEV_ADC
- select SAMSUNG_DEV_PWM
- help
- Machine support for Samsung Mobile NURI Board.
-
-config MACH_ORIGEN
- bool "ORIGEN"
- select CPU_EXYNOS4210
- select EXYNOS4_DEV_USB_OHCI
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C24XX_PWM
- select S3C_DEV_HSMMC
- select S3C_DEV_HSMMC2
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_G2D
- select S5P_DEV_I2C_HDMIPHY
- select S5P_DEV_JPEG
- select S5P_DEV_MFC
- select S5P_DEV_TV
- select S5P_DEV_USB_EHCI
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_PWM
- help
- Machine support for ORIGEN based on Samsung EXYNOS4210
-
-comment "EXYNOS4212 Boards"
-
-config MACH_SMDK4212
- bool "SMDK4212"
- select EXYNOS4_SETUP_FIMD0
- select EXYNOS4_SETUP_I2C1
- select EXYNOS4_SETUP_I2C3
- select EXYNOS4_SETUP_I2C7
- select EXYNOS4_SETUP_KEYPAD
- select EXYNOS4_SETUP_SDHCI
- select EXYNOS4_SETUP_USB_PHY
- select EXYNOS_DEV_DMA
- select EXYNOS_DEV_SYSMMU
- select S3C24XX_PWM
- select S3C_DEV_HSMMC2
- select S3C_DEV_HSMMC3
- select S3C_DEV_I2C1
- select S3C_DEV_I2C3
- select S3C_DEV_I2C7
- select S3C_DEV_RTC
- select S3C_DEV_USB_HSOTG
- select S3C_DEV_WDT
- select S5P_DEV_FIMC0
- select S5P_DEV_FIMC1
- select S5P_DEV_FIMC2
- select S5P_DEV_FIMC3
- select S5P_DEV_FIMD0
- select S5P_DEV_MFC
- select SAMSUNG_DEV_BACKLIGHT
- select SAMSUNG_DEV_KEYPAD
- select SAMSUNG_DEV_PWM
- select SOC_EXYNOS4212
- help
- Machine support for Samsung SMDK4212
-
-comment "EXYNOS4412 Boards"
-
-config MACH_SMDK4412
- bool "SMDK4412"
- select MACH_SMDK4212
- select SOC_EXYNOS4412
- help
- Machine support for Samsung SMDK4412
-endif
-
-endif
-
comment "Flattened Device Tree based board for EXYNOS SoCs"
config MACH_EXYNOS4_DT
bool "Samsung Exynos4 Machine using device tree"
+ default y
depends on ARCH_EXYNOS4
select ARM_AMBA
select CLKSRC_OF
@@ -419,7 +102,6 @@ config MACH_EXYNOS4_DT
select CPU_EXYNOS4210
select KEYBOARD_SAMSUNG if INPUT_KEYBOARD
select S5P_DEV_MFC
- select USE_OF
help
Machine support for Samsung Exynos4 machine with device tree enabled.
Select this if a fdt blob is available for the Exynos4 SoC based board.
@@ -433,28 +115,10 @@ config MACH_EXYNOS5_DT
select ARM_AMBA
select CLKSRC_OF
select USB_ARCH_HAS_XHCI
- select USE_OF
help
Machine support for Samsung EXYNOS5 machine with device tree enabled.
Select this if a fdt blob is available for the EXYNOS5 SoC based board.
-if ARCH_EXYNOS4
-
-comment "Configuration for HSMMC 8-bit bus width"
-
-config EXYNOS4_SDHCI_CH0_8BIT
- bool "Channel 0 with 8-bit bus"
- help
- Support HSMMC Channel 0 8-bit bus.
- If selected, Channel 1 is disabled.
-
-config EXYNOS4_SDHCI_CH2_8BIT
- bool "Channel 2 with 8-bit bus"
- help
- Support HSMMC Channel 2 8-bit bus.
- If selected, Channel 3 is disabled.
-endif
-
endmenu
endif
diff --git a/arch/arm/mach-exynos/Makefile b/arch/arm/mach-exynos/Makefile
index b09b027178f3..e970a7a4e278 100644
--- a/arch/arm/mach-exynos/Makefile
+++ b/arch/arm/mach-exynos/Makefile
@@ -32,38 +32,5 @@ AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
# machine support
-obj-$(CONFIG_MACH_SMDKC210) += mach-smdkv310.o
-obj-$(CONFIG_MACH_SMDKV310) += mach-smdkv310.o
-obj-$(CONFIG_MACH_ARMLEX4210) += mach-armlex4210.o
-obj-$(CONFIG_MACH_UNIVERSAL_C210) += mach-universal_c210.o
-obj-$(CONFIG_MACH_NURI) += mach-nuri.o
-obj-$(CONFIG_MACH_ORIGEN) += mach-origen.o
-
-obj-$(CONFIG_MACH_SMDK4212) += mach-smdk4x12.o
-obj-$(CONFIG_MACH_SMDK4412) += mach-smdk4x12.o
-
obj-$(CONFIG_MACH_EXYNOS4_DT) += mach-exynos4-dt.o
obj-$(CONFIG_MACH_EXYNOS5_DT) += mach-exynos5-dt.o
-
-# device support
-
-obj-y += dev-uart.o
-obj-$(CONFIG_ARCH_EXYNOS4) += dev-audio.o
-obj-$(CONFIG_EXYNOS4_DEV_AHCI) += dev-ahci.o
-obj-$(CONFIG_EXYNOS_DEV_DMA) += dma.o
-obj-$(CONFIG_EXYNOS4_DEV_USB_OHCI) += dev-ohci.o
-
-obj-$(CONFIG_ARCH_EXYNOS) += setup-i2c0.o
-obj-$(CONFIG_EXYNOS4_SETUP_FIMC) += setup-fimc.o
-obj-$(CONFIG_EXYNOS4_SETUP_FIMD0) += setup-fimd0.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C1) += setup-i2c1.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C2) += setup-i2c2.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C3) += setup-i2c3.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C4) += setup-i2c4.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C5) += setup-i2c5.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C6) += setup-i2c6.o
-obj-$(CONFIG_EXYNOS4_SETUP_I2C7) += setup-i2c7.o
-obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o
-obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o
-obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o
-obj-$(CONFIG_EXYNOS_SETUP_SPI) += setup-spi.o
diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c
index f7e504b7874d..81e6320ca091 100644
--- a/arch/arm/mach-exynos/common.c
+++ b/arch/arm/mach-exynos/common.c
@@ -40,20 +40,9 @@
#include <mach/regs-irq.h>
#include <mach/regs-pmu.h>
-#include <mach/regs-gpio.h>
-#include <mach/irqs.h>
#include <plat/cpu.h>
-#include <plat/devs.h>
#include <plat/pm.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <plat/adc-core.h>
-#include <plat/fb-core.h>
-#include <plat/fimc-core.h>
-#include <plat/iic-core.h>
-#include <plat/tv-core.h>
-#include <plat/spi-core.h>
#include <plat/regs-serial.h>
#include "common.h"
@@ -69,31 +58,25 @@ static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static void exynos5440_map_io(void);
-static void exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no);
static int exynos_init(void);
-unsigned long xxti_f = 0, xusbxti_f = 0;
-
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4210,
}, {
.idcode = EXYNOS4212_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4212,
}, {
.idcode = EXYNOS4412_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
- .init_uarts = exynos4_init_uarts,
.init = exynos_init,
.name = name_exynos4412,
}, {
@@ -113,15 +96,6 @@ static struct cpu_table cpu_ids[] __initdata = {
/* Initial IO mappings */
-static struct map_desc exynos_iodesc[] __initdata = {
- {
- .virtual = (unsigned long)S5P_VA_CHIPID,
- .pfn = __phys_to_pfn(EXYNOS_PA_CHIPID),
- .length = SZ_4K,
- .type = MT_DEVICE,
- },
-};
-
static struct map_desc exynos4_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
@@ -304,13 +278,6 @@ static struct map_desc exynos5440_iodesc0[] __initdata = {
},
};
-static struct samsung_pwm_variant exynos4_pwm_variant = {
- .bits = 32,
- .div_base = 0,
- .has_tint_cstat = true,
- .tclk_mask = 0,
-};
-
void exynos4_restart(char mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
@@ -353,8 +320,7 @@ void __init exynos_init_late(void)
exynos_pm_late_initcall();
}
-#ifdef CONFIG_OF
-int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
+static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
int depth, void *data)
{
struct map_desc iodesc;
@@ -376,7 +342,6 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
iotable_init(&iodesc, 1);
return 1;
}
-#endif
/*
* exynos_map_io
@@ -384,19 +349,11 @@ int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
* register the standard cpu IO areas
*/
-void __init exynos_init_io(struct map_desc *mach_desc, int size)
+void __init exynos_init_io(void)
{
debug_ll_io_init();
-#ifdef CONFIG_OF
- if (initial_boot_params)
- of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
- else
-#endif
- iotable_init(exynos_iodesc, ARRAY_SIZE(exynos_iodesc));
-
- if (mach_desc)
- iotable_init(mach_desc, size);
+ of_scan_flat_dt(exynos_fdt_map_chipid, NULL);
/* detect cpu id and rev. */
s5p_init_cpu(S5P_VA_CHIPID);
@@ -417,34 +374,6 @@ static void __init exynos4_map_io(void)
iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
if (soc_is_exynos4212() || soc_is_exynos4412())
iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
-
- /* initialize device information early */
- exynos4_default_sdhci0();
- exynos4_default_sdhci1();
- exynos4_default_sdhci2();
- exynos4_default_sdhci3();
-
- s3c_adc_setname("samsung-adc-v3");
-
- s3c_fimc_setname(0, "exynos4-fimc");
- s3c_fimc_setname(1, "exynos4-fimc");
- s3c_fimc_setname(2, "exynos4-fimc");
- s3c_fimc_setname(3, "exynos4-fimc");
-
- s3c_sdhci_setname(0, "exynos4-sdhci");
- s3c_sdhci_setname(1, "exynos4-sdhci");
- s3c_sdhci_setname(2, "exynos4-sdhci");
- s3c_sdhci_setname(3, "exynos4-sdhci");
-
- /* The I2C bus controllers are directly compatible with s3c2440 */
- s3c_i2c0_setname("s3c2440-i2c");
- s3c_i2c1_setname("s3c2440-i2c");
- s3c_i2c2_setname("s3c2440-i2c");
-
- s5p_fb_setname(0, "exynos4-fb");
- s5p_hdmi_setname("exynos4-hdmi");
-
- s3c64xx_spi_setname("exynos4210-spi");
}
static void __init exynos5_map_io(void)
@@ -460,81 +389,10 @@ static void __init exynos5440_map_io(void)
iotable_init(exynos5440_iodesc0, ARRAY_SIZE(exynos5440_iodesc0));
}
-void __init exynos_set_timer_source(u8 channels)
-{
- exynos4_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
- exynos4_pwm_variant.output_mask &= ~channels;
-}
-
void __init exynos_init_time(void)
{
- unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
- EXYNOS4_IRQ_TIMER0_VIC, EXYNOS4_IRQ_TIMER1_VIC,
- EXYNOS4_IRQ_TIMER2_VIC, EXYNOS4_IRQ_TIMER3_VIC,
- EXYNOS4_IRQ_TIMER4_VIC,
- };
-
- if (of_have_populated_dt()) {
-#ifdef CONFIG_OF
- of_clk_init(NULL);
- clocksource_of_init();
-#endif
- } else {
- /* todo: remove after migrating legacy E4 platforms to dt */
-#ifdef CONFIG_ARCH_EXYNOS4
- exynos4_clk_init(NULL, !soc_is_exynos4210(), S5P_VA_CMU, readl(S5P_VA_CHIPID + 8) & 1);
- exynos4_clk_register_fixed_ext(xxti_f, xusbxti_f);
-#endif
-#ifdef CONFIG_CLKSRC_SAMSUNG_PWM
- if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
- samsung_pwm_clocksource_init(S3C_VA_TIMER,
- timer_irqs, &exynos4_pwm_variant);
- else
-#endif
- mct_init(S5P_VA_SYSTIMER, EXYNOS4_IRQ_MCT_G0,
- EXYNOS4_IRQ_MCT_L0, EXYNOS4_IRQ_MCT_L1);
- }
-}
-
-static unsigned int max_combiner_nr(void)
-{
- if (soc_is_exynos5250())
- return EXYNOS5_MAX_COMBINER_NR;
- else if (soc_is_exynos4412())
- return EXYNOS4412_MAX_COMBINER_NR;
- else if (soc_is_exynos4212())
- return EXYNOS4212_MAX_COMBINER_NR;
- else
- return EXYNOS4210_MAX_COMBINER_NR;
-}
-
-
-void __init exynos4_init_irq(void)
-{
- unsigned int gic_bank_offset;
-
- gic_bank_offset = soc_is_exynos4412() ? 0x4000 : 0x8000;
-
- if (!of_have_populated_dt())
- gic_init_bases(0, IRQ_PPI(0), S5P_VA_GIC_DIST, S5P_VA_GIC_CPU, gic_bank_offset, NULL);
-#ifdef CONFIG_OF
- else
- irqchip_init();
-#endif
-
- if (!of_have_populated_dt())
- combiner_init(S5P_VA_COMBINER_BASE, NULL,
- max_combiner_nr(), COMBINER_IRQ(0, 0));
-
- gic_arch_extn.irq_set_wake = s3c_irq_wake;
-}
-
-void __init exynos5_init_irq(void)
-{
-#ifdef CONFIG_OF
- irqchip_init();
-#endif
- gic_arch_extn.irq_set_wake = s3c_irq_wake;
+ of_clk_init(NULL);
+ clocksource_of_init();
}
struct bus_type exynos_subsys = {
@@ -552,59 +410,19 @@ static int __init exynos_core_init(void)
}
core_initcall(exynos_core_init);
-#ifdef CONFIG_CACHE_L2X0
static int __init exynos4_l2x0_cache_init(void)
{
int ret;
- if (soc_is_exynos5250() || soc_is_exynos5440())
- return 0;
-
ret = l2x0_of_init(L2_AUX_VAL, L2_AUX_MASK);
- if (!ret) {
- l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
- clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
- return 0;
- }
-
- if (!(__raw_readl(S5P_VA_L2CC + L2X0_CTRL) & 0x1)) {
- l2x0_saved_regs.phy_base = EXYNOS4_PA_L2CC;
- /* TAG, Data Latency Control: 2 cycles */
- l2x0_saved_regs.tag_latency = 0x110;
-
- if (soc_is_exynos4212() || soc_is_exynos4412())
- l2x0_saved_regs.data_latency = 0x120;
- else
- l2x0_saved_regs.data_latency = 0x110;
-
- l2x0_saved_regs.prefetch_ctrl = 0x30000007;
- l2x0_saved_regs.pwr_ctrl =
- (L2X0_DYNAMIC_CLK_GATING_EN | L2X0_STNDBY_MODE_EN);
-
- l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+ if (ret)
+ return ret;
- __raw_writel(l2x0_saved_regs.tag_latency,
- S5P_VA_L2CC + L2X0_TAG_LATENCY_CTRL);
- __raw_writel(l2x0_saved_regs.data_latency,
- S5P_VA_L2CC + L2X0_DATA_LATENCY_CTRL);
-
- /* L2X0 Prefetch Control */
- __raw_writel(l2x0_saved_regs.prefetch_ctrl,
- S5P_VA_L2CC + L2X0_PREFETCH_CTRL);
-
- /* L2X0 Power Control */
- __raw_writel(l2x0_saved_regs.pwr_ctrl,
- S5P_VA_L2CC + L2X0_POWER_CTRL);
-
- clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
- clean_dcache_area(&l2x0_saved_regs, sizeof(struct l2x0_regs));
- }
-
- l2x0_init(S5P_VA_L2CC, L2_AUX_VAL, L2_AUX_MASK);
+ l2x0_regs_phys = virt_to_phys(&l2x0_saved_regs);
+ clean_dcache_area(&l2x0_regs_phys, sizeof(unsigned long));
return 0;
}
early_initcall(exynos4_l2x0_cache_init);
-#endif
static int __init exynos_init(void)
{
@@ -612,350 +430,3 @@ static int __init exynos_init(void)
return device_register(&exynos4_dev);
}
-
-/* uart registration process */
-
-static void __init exynos4_init_uarts(struct s3c2410_uartcfg *cfg, int no)
-{
- struct s3c2410_uartcfg *tcfg = cfg;
- u32 ucnt;
-
- for (ucnt = 0; ucnt < no; ucnt++, tcfg++)
- tcfg->has_fracval = 1;
-
- s3c24xx_init_uartdevs("exynos4210-uart", exynos4_uart_resources, cfg, no);
-}
-
-static void __iomem *exynos_eint_base;
-
-static DEFINE_SPINLOCK(eint_lock);
-
-static unsigned int eint0_15_data[16];
-
-static inline int exynos4_irq_to_gpio(unsigned int irq)
-{
- if (irq < IRQ_EINT(0))
- return -EINVAL;
-
- irq -= IRQ_EINT(0);
- if (irq < 8)
- return EXYNOS4_GPX0(irq);
-
- irq -= 8;
- if (irq < 8)
- return EXYNOS4_GPX1(irq);
-
- irq -= 8;
- if (irq < 8)
- return EXYNOS4_GPX2(irq);
-
- irq -= 8;
- if (irq < 8)
- return EXYNOS4_GPX3(irq);
-
- return -EINVAL;
-}
-
-static inline int exynos5_irq_to_gpio(unsigned int irq)
-{
- if (irq < IRQ_EINT(0))
- return -EINVAL;
-
- irq -= IRQ_EINT(0);
- if (irq < 8)
- return EXYNOS5_GPX0(irq);
-
- irq -= 8;
- if (irq < 8)
- return EXYNOS5_GPX1(irq);
-
- irq -= 8;
- if (irq < 8)
- return EXYNOS5_GPX2(irq);
-
- irq -= 8;
- if (irq < 8)
- return EXYNOS5_GPX3(irq);
-
- return -EINVAL;
-}
-
-static unsigned int exynos4_eint0_15_src_int[16] = {
- EXYNOS4_IRQ_EINT0,
- EXYNOS4_IRQ_EINT1,
- EXYNOS4_IRQ_EINT2,
- EXYNOS4_IRQ_EINT3,
- EXYNOS4_IRQ_EINT4,
- EXYNOS4_IRQ_EINT5,
- EXYNOS4_IRQ_EINT6,
- EXYNOS4_IRQ_EINT7,
- EXYNOS4_IRQ_EINT8,
- EXYNOS4_IRQ_EINT9,
- EXYNOS4_IRQ_EINT10,
- EXYNOS4_IRQ_EINT11,
- EXYNOS4_IRQ_EINT12,
- EXYNOS4_IRQ_EINT13,
- EXYNOS4_IRQ_EINT14,
- EXYNOS4_IRQ_EINT15,
-};
-
-static unsigned int exynos5_eint0_15_src_int[16] = {
- EXYNOS5_IRQ_EINT0,
- EXYNOS5_IRQ_EINT1,
- EXYNOS5_IRQ_EINT2,
- EXYNOS5_IRQ_EINT3,
- EXYNOS5_IRQ_EINT4,
- EXYNOS5_IRQ_EINT5,
- EXYNOS5_IRQ_EINT6,
- EXYNOS5_IRQ_EINT7,
- EXYNOS5_IRQ_EINT8,
- EXYNOS5_IRQ_EINT9,
- EXYNOS5_IRQ_EINT10,
- EXYNOS5_IRQ_EINT11,
- EXYNOS5_IRQ_EINT12,
- EXYNOS5_IRQ_EINT13,
- EXYNOS5_IRQ_EINT14,
- EXYNOS5_IRQ_EINT15,
-};
-static inline void exynos_irq_eint_mask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
- mask |= EINT_OFFSET_BIT(data->irq);
- __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
- spin_unlock(&eint_lock);
-}
-
-static void exynos_irq_eint_unmask(struct irq_data *data)
-{
- u32 mask;
-
- spin_lock(&eint_lock);
- mask = __raw_readl(EINT_MASK(exynos_eint_base, data->irq));
- mask &= ~(EINT_OFFSET_BIT(data->irq));
- __raw_writel(mask, EINT_MASK(exynos_eint_base, data->irq));
- spin_unlock(&eint_lock);
-}
-
-static inline void exynos_irq_eint_ack(struct irq_data *data)
-{
- __raw_writel(EINT_OFFSET_BIT(data->irq),
- EINT_PEND(exynos_eint_base, data->irq));
-}
-
-static void exynos_irq_eint_maskack(struct irq_data *data)
-{
- exynos_irq_eint_mask(data);
- exynos_irq_eint_ack(data);
-}
-
-static int exynos_irq_eint_set_type(struct irq_data *data, unsigned int type)
-{
- int offs = EINT_OFFSET(data->irq);
- int shift;
- u32 ctrl, mask;
- u32 newvalue = 0;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- newvalue = S5P_IRQ_TYPE_EDGE_RISING;
- break;
-
- case IRQ_TYPE_EDGE_FALLING:
- newvalue = S5P_IRQ_TYPE_EDGE_FALLING;
- break;
-
- case IRQ_TYPE_EDGE_BOTH:
- newvalue = S5P_IRQ_TYPE_EDGE_BOTH;
- break;
-
- case IRQ_TYPE_LEVEL_LOW:
- newvalue = S5P_IRQ_TYPE_LEVEL_LOW;
- break;
-
- case IRQ_TYPE_LEVEL_HIGH:
- newvalue = S5P_IRQ_TYPE_LEVEL_HIGH;
- break;
-
- default:
- printk(KERN_ERR "No such irq type %d", type);
- return -EINVAL;
- }
-
- shift = (offs & 0x7) * 4;
- mask = 0x7 << shift;
-
- spin_lock(&eint_lock);
- ctrl = __raw_readl(EINT_CON(exynos_eint_base, data->irq));
- ctrl &= ~mask;
- ctrl |= newvalue << shift;
- __raw_writel(ctrl, EINT_CON(exynos_eint_base, data->irq));
- spin_unlock(&eint_lock);
-
- if (soc_is_exynos5250())
- s3c_gpio_cfgpin(exynos5_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
- else
- s3c_gpio_cfgpin(exynos4_irq_to_gpio(data->irq), S3C_GPIO_SFN(0xf));
-
- return 0;
-}
-
-static struct irq_chip exynos_irq_eint = {
- .name = "exynos-eint",
- .irq_mask = exynos_irq_eint_mask,
- .irq_unmask = exynos_irq_eint_unmask,
- .irq_mask_ack = exynos_irq_eint_maskack,
- .irq_ack = exynos_irq_eint_ack,
- .irq_set_type = exynos_irq_eint_set_type,
-#ifdef CONFIG_PM
- .irq_set_wake = s3c_irqext_wake,
-#endif
-};
-
-/*
- * exynos4_irq_demux_eint
- *
- * This function demuxes the IRQ from from EINTs 16 to 31.
- * It is designed to be inlined into the specific handler
- * s5p_irq_demux_eintX_Y.
- *
- * Each EINT pend/mask registers handle eight of them.
- */
-static inline void exynos_irq_demux_eint(unsigned int start)
-{
- unsigned int irq;
-
- u32 status = __raw_readl(EINT_PEND(exynos_eint_base, start));
- u32 mask = __raw_readl(EINT_MASK(exynos_eint_base, start));
-
- status &= ~mask;
- status &= 0xff;
-
- while (status) {
- irq = fls(status) - 1;
- generic_handle_irq(irq + start);
- status &= ~(1 << irq);
- }
-}
-
-static void exynos_irq_demux_eint16_31(unsigned int irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_get_chip(irq);
- chained_irq_enter(chip, desc);
- exynos_irq_demux_eint(IRQ_EINT(16));
- exynos_irq_demux_eint(IRQ_EINT(24));
- chained_irq_exit(chip, desc);
-}
-
-static void exynos_irq_eint0_15(unsigned int irq, struct irq_desc *desc)
-{
- u32 *irq_data = irq_get_handler_data(irq);
- struct irq_chip *chip = irq_get_chip(irq);
-
- chained_irq_enter(chip, desc);
- generic_handle_irq(*irq_data);
- chained_irq_exit(chip, desc);
-}
-
-static int __init exynos_init_irq_eint(void)
-{
- int irq;
-
-#ifdef CONFIG_PINCTRL_SAMSUNG
- /*
- * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf
- * functionality along with support for external gpio and wakeup
- * interrupts. If the samsung pinctrl driver is enabled and includes
- * the wakeup interrupt support, then the setting up external wakeup
- * interrupts here can be skipped. This check here is temporary to
- * allow exynos4 platforms that do not use Samsung pinctrl driver to
- * co-exist with platforms that do. When all of the Samsung Exynos4
- * platforms switch over to using the pinctrl driver, the wakeup
- * interrupt support code here can be completely removed.
- */
- static const struct of_device_id exynos_pinctrl_ids[] = {
- { .compatible = "samsung,exynos4210-pinctrl", },
- { .compatible = "samsung,exynos4x12-pinctrl", },
- { .compatible = "samsung,exynos5250-pinctrl", },
- };
- struct device_node *pctrl_np, *wkup_np;
- const char *wkup_compat = "samsung,exynos4210-wakeup-eint";
-
- for_each_matching_node(pctrl_np, exynos_pinctrl_ids) {
- if (of_device_is_available(pctrl_np)) {
- wkup_np = of_find_compatible_node(pctrl_np, NULL,
- wkup_compat);
- if (wkup_np)
- return -ENODEV;
- }
- }
-#endif
- if (soc_is_exynos5440())
- return 0;
-
- if (soc_is_exynos5250())
- exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K);
- else
- exynos_eint_base = ioremap(EXYNOS4_PA_GPIO2, SZ_4K);
-
- if (exynos_eint_base == NULL) {
- pr_err("unable to ioremap for EINT base address\n");
- return -ENOMEM;
- }
-
- for (irq = 0 ; irq <= 31 ; irq++) {
- irq_set_chip_and_handler(IRQ_EINT(irq), &exynos_irq_eint,
- handle_level_irq);
- set_irq_flags(IRQ_EINT(irq), IRQF_VALID);
- }
-
- irq_set_chained_handler(EXYNOS_IRQ_EINT16_31, exynos_irq_demux_eint16_31);
-
- for (irq = 0 ; irq <= 15 ; irq++) {
- eint0_15_data[irq] = IRQ_EINT(irq);
-
- if (soc_is_exynos5250()) {
- irq_set_handler_data(exynos5_eint0_15_src_int[irq],
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos5_eint0_15_src_int[irq],
- exynos_irq_eint0_15);
- } else {
- irq_set_handler_data(exynos4_eint0_15_src_int[irq],
- &eint0_15_data[irq]);
- irq_set_chained_handler(exynos4_eint0_15_src_int[irq],
- exynos_irq_eint0_15);
- }
- }
-
- return 0;
-}
-arch_initcall(exynos_init_irq_eint);
-
-static struct resource exynos4_pmu_resource[] = {
- DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU),
- DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU1),
-#if defined(CONFIG_SOC_EXYNOS4412)
- DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU2),
- DEFINE_RES_IRQ(EXYNOS4_IRQ_PMU_CPU3),
-#endif
-};
-
-static struct platform_device exynos4_device_pmu = {
- .name = "arm-pmu",
- .num_resources = ARRAY_SIZE(exynos4_pmu_resource),
- .resource = exynos4_pmu_resource,
-};
-
-static int __init exynos_armpmu_init(void)
-{
- if (!of_have_populated_dt()) {
- if (soc_is_exynos4210() || soc_is_exynos4212())
- exynos4_device_pmu.num_resources = 2;
- platform_device_register(&exynos4_device_pmu);
- }
-
- return 0;
-}
-arch_initcall(exynos_armpmu_init);
diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h
index 11fc1e29819b..38d45fd23be4 100644
--- a/arch/arm/mach-exynos/common.h
+++ b/arch/arm/mach-exynos/common.h
@@ -19,9 +19,7 @@ void exynos_init_time(void);
extern unsigned long xxti_f, xusbxti_f;
struct map_desc;
-void exynos_init_io(struct map_desc *mach_desc, int size);
-void exynos4_init_irq(void);
-void exynos5_init_irq(void);
+void exynos_init_io(void);
void exynos4_restart(char mode, const char *cmd);
void exynos5_restart(char mode, const char *cmd);
void exynos_init_late(void);
diff --git a/arch/arm/mach-exynos/dev-ahci.c b/arch/arm/mach-exynos/dev-ahci.c
deleted file mode 100644
index ce1aad3eeeb9..000000000000
--- a/arch/arm/mach-exynos/dev-ahci.c
+++ /dev/null
@@ -1,255 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-ahci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - AHCI support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/ahci_platform.h>
-
-#include <plat/cpu.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-#include <mach/regs-pmu.h>
-
-/* PHY Control Register */
-#define SATA_CTRL0 0x0
-/* PHY Link Control Register */
-#define SATA_CTRL1 0x4
-/* PHY Status Register */
-#define SATA_PHY_STATUS 0x8
-
-#define SATA_CTRL0_RX_DATA_VALID(x) (x << 27)
-#define SATA_CTRL0_SPEED_MODE (1 << 26)
-#define SATA_CTRL0_M_PHY_CAL (1 << 19)
-#define SATA_CTRL0_PHY_CMU_RST_N (1 << 10)
-#define SATA_CTRL0_M_PHY_LN_RST_N (1 << 9)
-#define SATA_CTRL0_PHY_POR_N (1 << 8)
-
-#define SATA_CTRL1_RST_PMALIVE_N (1 << 8)
-#define SATA_CTRL1_RST_RXOOB_N (1 << 7)
-#define SATA_CTRL1_RST_RX_N (1 << 6)
-#define SATA_CTRL1_RST_TX_N (1 << 5)
-
-#define SATA_PHY_STATUS_CMU_OK (1 << 18)
-#define SATA_PHY_STATUS_LANE_OK (1 << 16)
-
-#define LANE0 0x200
-#define COM_LANE 0xA00
-
-#define HOST_PORTS_IMPL 0xC
-#define SCLK_SATA_FREQ (67 * MHZ)
-
-static void __iomem *phy_base, *phy_ctrl;
-
-struct phy_reg {
- u8 reg;
- u8 val;
-};
-
-/* SATA PHY setup */
-static const struct phy_reg exynos4_sataphy_cmu[] = {
- { 0x00, 0x06 }, { 0x02, 0x80 }, { 0x22, 0xa0 }, { 0x23, 0x42 },
- { 0x2e, 0x04 }, { 0x2f, 0x50 }, { 0x30, 0x70 }, { 0x31, 0x02 },
- { 0x32, 0x25 }, { 0x33, 0x40 }, { 0x34, 0x01 }, { 0x35, 0x40 },
- { 0x61, 0x2e }, { 0x63, 0x5e }, { 0x65, 0x42 }, { 0x66, 0xd1 },
- { 0x67, 0x20 }, { 0x68, 0x28 }, { 0x69, 0x78 }, { 0x6a, 0x04 },
- { 0x6b, 0xc8 }, { 0x6c, 0x06 },
-};
-
-static const struct phy_reg exynos4_sataphy_lane[] = {
- { 0x00, 0x02 }, { 0x05, 0x10 }, { 0x06, 0x84 }, { 0x07, 0x04 },
- { 0x08, 0xe0 }, { 0x10, 0x23 }, { 0x13, 0x05 }, { 0x14, 0x30 },
- { 0x15, 0x00 }, { 0x17, 0x70 }, { 0x18, 0xf2 }, { 0x19, 0x1e },
- { 0x1a, 0x18 }, { 0x1b, 0x0d }, { 0x1c, 0x08 }, { 0x50, 0x60 },
- { 0x51, 0x0f },
-};
-
-static const struct phy_reg exynos4_sataphy_comlane[] = {
- { 0x01, 0x20 }, { 0x03, 0x40 }, { 0x04, 0x3c }, { 0x05, 0x7d },
- { 0x06, 0x1d }, { 0x07, 0xcf }, { 0x08, 0x05 }, { 0x09, 0x63 },
- { 0x0a, 0x29 }, { 0x0b, 0xc4 }, { 0x0c, 0x01 }, { 0x0d, 0x03 },
- { 0x0e, 0x28 }, { 0x0f, 0x98 }, { 0x10, 0x19 }, { 0x13, 0x80 },
- { 0x14, 0xf0 }, { 0x15, 0xd0 }, { 0x39, 0xa0 }, { 0x3a, 0xa0 },
- { 0x3b, 0xa0 }, { 0x3c, 0xa0 }, { 0x3d, 0xa0 }, { 0x3e, 0xa0 },
- { 0x3f, 0xa0 }, { 0x40, 0x42 }, { 0x42, 0x80 }, { 0x43, 0x58 },
- { 0x45, 0x44 }, { 0x46, 0x5c }, { 0x47, 0x86 }, { 0x48, 0x8d },
- { 0x49, 0xd0 }, { 0x4a, 0x09 }, { 0x4b, 0x90 }, { 0x4c, 0x07 },
- { 0x4d, 0x40 }, { 0x51, 0x20 }, { 0x52, 0x32 }, { 0x7f, 0xd8 },
- { 0x80, 0x1a }, { 0x81, 0xff }, { 0x82, 0x11 }, { 0x83, 0x00 },
- { 0x87, 0xf0 }, { 0x87, 0xff }, { 0x87, 0xff }, { 0x87, 0xff },
- { 0x87, 0xff }, { 0x8c, 0x1c }, { 0x8d, 0xc2 }, { 0x8e, 0xc3 },
- { 0x8f, 0x3f }, { 0x90, 0x0a }, { 0x96, 0xf8 },
-};
-
-static int wait_for_phy_ready(void __iomem *reg, unsigned long bit)
-{
- unsigned long timeout;
-
- /* wait for maximum of 3 sec */
- timeout = jiffies + msecs_to_jiffies(3000);
- while (!(__raw_readl(reg) & bit)) {
- if (time_after(jiffies, timeout))
- return -1;
- cpu_relax();
- }
- return 0;
-}
-
-static int ahci_phy_init(void __iomem *mmio)
-{
- int i, ctrl0;
-
- for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_cmu); i++)
- __raw_writeb(exynos4_sataphy_cmu[i].val,
- phy_base + (exynos4_sataphy_cmu[i].reg * 4));
-
- for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_lane); i++)
- __raw_writeb(exynos4_sataphy_lane[i].val,
- phy_base + (LANE0 + exynos4_sataphy_lane[i].reg) * 4);
-
- for (i = 0; i < ARRAY_SIZE(exynos4_sataphy_comlane); i++)
- __raw_writeb(exynos4_sataphy_comlane[i].val,
- phy_base + (COM_LANE + exynos4_sataphy_comlane[i].reg) * 4);
-
- __raw_writeb(0x07, phy_base);
-
- ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
- ctrl0 |= SATA_CTRL0_PHY_CMU_RST_N;
- __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
- if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
- SATA_PHY_STATUS_CMU_OK) < 0) {
- printk(KERN_ERR "PHY CMU not ready\n");
- return -EBUSY;
- }
-
- __raw_writeb(0x03, phy_base + (COM_LANE * 4));
-
- ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
- ctrl0 |= SATA_CTRL0_M_PHY_LN_RST_N;
- __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
- if (wait_for_phy_ready(phy_ctrl + SATA_PHY_STATUS,
- SATA_PHY_STATUS_LANE_OK) < 0) {
- printk(KERN_ERR "PHY LANE not ready\n");
- return -EBUSY;
- }
-
- ctrl0 = __raw_readl(phy_ctrl + SATA_CTRL0);
- ctrl0 |= SATA_CTRL0_M_PHY_CAL;
- __raw_writel(ctrl0, phy_ctrl + SATA_CTRL0);
-
- return 0;
-}
-
-static int exynos4_ahci_init(struct device *dev, void __iomem *mmio)
-{
- struct clk *clk_sata, *clk_sataphy, *clk_sclk_sata;
- int val, ret;
-
- phy_base = ioremap(EXYNOS4_PA_SATAPHY, SZ_64K);
- if (!phy_base) {
- dev_err(dev, "failed to allocate memory for SATA PHY\n");
- return -ENOMEM;
- }
-
- phy_ctrl = ioremap(EXYNOS4_PA_SATAPHY_CTRL, SZ_16);
- if (!phy_ctrl) {
- dev_err(dev, "failed to allocate memory for SATA PHY CTRL\n");
- ret = -ENOMEM;
- goto err1;
- }
-
- clk_sata = clk_get(dev, "sata");
- if (IS_ERR(clk_sata)) {
- dev_err(dev, "failed to get sata clock\n");
- ret = PTR_ERR(clk_sata);
- clk_sata = NULL;
- goto err2;
-
- }
- clk_enable(clk_sata);
-
- clk_sataphy = clk_get(dev, "sataphy");
- if (IS_ERR(clk_sataphy)) {
- dev_err(dev, "failed to get sataphy clock\n");
- ret = PTR_ERR(clk_sataphy);
- clk_sataphy = NULL;
- goto err3;
- }
- clk_enable(clk_sataphy);
-
- clk_sclk_sata = clk_get(dev, "sclk_sata");
- if (IS_ERR(clk_sclk_sata)) {
- dev_err(dev, "failed to get sclk_sata\n");
- ret = PTR_ERR(clk_sclk_sata);
- clk_sclk_sata = NULL;
- goto err4;
- }
- clk_enable(clk_sclk_sata);
- clk_set_rate(clk_sclk_sata, SCLK_SATA_FREQ);
-
- __raw_writel(S5P_PMU_SATA_PHY_CONTROL_EN, S5P_PMU_SATA_PHY_CONTROL);
-
- /* Enable PHY link control */
- val = SATA_CTRL1_RST_PMALIVE_N | SATA_CTRL1_RST_RXOOB_N |
- SATA_CTRL1_RST_RX_N | SATA_CTRL1_RST_TX_N;
- __raw_writel(val, phy_ctrl + SATA_CTRL1);
-
- /* Set communication speed as 3Gbps and enable PHY power */
- val = SATA_CTRL0_RX_DATA_VALID(3) | SATA_CTRL0_SPEED_MODE |
- SATA_CTRL0_PHY_POR_N;
- __raw_writel(val, phy_ctrl + SATA_CTRL0);
-
- /* Port0 is available */
- __raw_writel(0x1, mmio + HOST_PORTS_IMPL);
-
- return ahci_phy_init(mmio);
-
-err4:
- clk_disable(clk_sataphy);
- clk_put(clk_sataphy);
-err3:
- clk_disable(clk_sata);
- clk_put(clk_sata);
-err2:
- iounmap(phy_ctrl);
-err1:
- iounmap(phy_base);
-
- return ret;
-}
-
-static struct ahci_platform_data exynos4_ahci_pdata = {
- .init = exynos4_ahci_init,
-};
-
-static struct resource exynos4_ahci_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SATA, SZ_64K),
- [1] = DEFINE_RES_IRQ(EXYNOS4_IRQ_SATA),
-};
-
-static u64 exynos4_ahci_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ahci = {
- .name = "ahci",
- .id = -1,
- .resource = exynos4_ahci_resource,
- .num_resources = ARRAY_SIZE(exynos4_ahci_resource),
- .dev = {
- .platform_data = &exynos4_ahci_pdata,
- .dma_mask = &exynos4_ahci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c
deleted file mode 100644
index c662c89794b2..000000000000
--- a/arch/arm/mach-exynos/dev-audio.c
+++ /dev/null
@@ -1,254 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dev-audio.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (c) 2010 Samsung Electronics Co. Ltd
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_data/asoc-s3c.h>
-
-#include <plat/gpio-cfg.h>
-
-#include <mach/map.h>
-#include <mach/dma.h>
-#include <mach/irqs.h>
-
-#define EXYNOS4_AUDSS_INT_MEM (0x03000000)
-
-static int exynos4_cfg_i2s(struct platform_device *pdev)
-{
- /* configure GPIO for i2s port */
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 7, S3C_GPIO_SFN(2));
- break;
- case 1:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(2));
- break;
- case 2:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(4));
- break;
- default:
- printk(KERN_ERR "Invalid Device %d\n", pdev->id);
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata i2sv5_pdata = {
- .cfg_gpio = exynos4_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_PRI_6CHAN | QUIRK_SEC_DAI
- | QUIRK_NEED_RSTCLR,
- .idma_addr = EXYNOS4_AUDSS_INT_MEM,
- },
- },
-};
-
-static struct resource exynos4_i2s0_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S0_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S0_RX),
- [3] = DEFINE_RES_DMA(DMACH_I2S0S_TX),
-};
-
-struct platform_device exynos4_device_i2s0 = {
- .name = "samsung-i2s",
- .id = 0,
- .num_resources = ARRAY_SIZE(exynos4_i2s0_resource),
- .resource = exynos4_i2s0_resource,
- .dev = {
- .platform_data = &i2sv5_pdata,
- },
-};
-
-static struct s3c_audio_pdata i2sv3_pdata = {
- .cfg_gpio = exynos4_cfg_i2s,
- .type = {
- .i2s = {
- .quirks = QUIRK_NO_MUXPSR,
- },
- },
-};
-
-static struct resource exynos4_i2s1_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S1_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S1_RX),
-};
-
-struct platform_device exynos4_device_i2s1 = {
- .name = "samsung-i2s",
- .id = 1,
- .num_resources = ARRAY_SIZE(exynos4_i2s1_resource),
- .resource = exynos4_i2s1_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-static struct resource exynos4_i2s2_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_I2S2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_I2S2_TX),
- [2] = DEFINE_RES_DMA(DMACH_I2S2_RX),
-};
-
-struct platform_device exynos4_device_i2s2 = {
- .name = "samsung-i2s",
- .id = 2,
- .num_resources = ARRAY_SIZE(exynos4_i2s2_resource),
- .resource = exynos4_i2s2_resource,
- .dev = {
- .platform_data = &i2sv3_pdata,
- },
-};
-
-/* PCM Controller platform_devices */
-
-static int exynos4_pcm_cfg_gpio(struct platform_device *pdev)
-{
- switch (pdev->id) {
- case 0:
- s3c_gpio_cfgpin_range(EXYNOS4_GPZ(0), 5, S3C_GPIO_SFN(3));
- break;
- case 1:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(3));
- break;
- case 2:
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 5, S3C_GPIO_SFN(3));
- break;
- default:
- printk(KERN_DEBUG "Invalid PCM Controller number!");
- return -EINVAL;
- }
-
- return 0;
-}
-
-static struct s3c_audio_pdata s3c_pcm_pdata = {
- .cfg_gpio = exynos4_pcm_cfg_gpio,
-};
-
-static struct resource exynos4_pcm0_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM0, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM0_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM0_RX),
-};
-
-struct platform_device exynos4_device_pcm0 = {
- .name = "samsung-pcm",
- .id = 0,
- .num_resources = ARRAY_SIZE(exynos4_pcm0_resource),
- .resource = exynos4_pcm0_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource exynos4_pcm1_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM1, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM1_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM1_RX),
-};
-
-struct platform_device exynos4_device_pcm1 = {
- .name = "samsung-pcm",
- .id = 1,
- .num_resources = ARRAY_SIZE(exynos4_pcm1_resource),
- .resource = exynos4_pcm1_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-static struct resource exynos4_pcm2_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_PCM2, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_PCM2_TX),
- [2] = DEFINE_RES_DMA(DMACH_PCM2_RX),
-};
-
-struct platform_device exynos4_device_pcm2 = {
- .name = "samsung-pcm",
- .id = 2,
- .num_resources = ARRAY_SIZE(exynos4_pcm2_resource),
- .resource = exynos4_pcm2_resource,
- .dev = {
- .platform_data = &s3c_pcm_pdata,
- },
-};
-
-/* AC97 Controller platform devices */
-
-static int exynos4_ac97_cfg_gpio(struct platform_device *pdev)
-{
- return s3c_gpio_cfgpin_range(EXYNOS4_GPC0(0), 5, S3C_GPIO_SFN(4));
-}
-
-static struct resource exynos4_ac97_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_AC97, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_AC97_PCMOUT),
- [2] = DEFINE_RES_DMA(DMACH_AC97_PCMIN),
- [3] = DEFINE_RES_DMA(DMACH_AC97_MICIN),
- [4] = DEFINE_RES_IRQ(EXYNOS4_IRQ_AC97),
-};
-
-static struct s3c_audio_pdata s3c_ac97_pdata = {
- .cfg_gpio = exynos4_ac97_cfg_gpio,
-};
-
-static u64 exynos4_ac97_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ac97 = {
- .name = "samsung-ac97",
- .id = -1,
- .num_resources = ARRAY_SIZE(exynos4_ac97_resource),
- .resource = exynos4_ac97_resource,
- .dev = {
- .platform_data = &s3c_ac97_pdata,
- .dma_mask = &exynos4_ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
-
-/* S/PDIF Controller platform_device */
-
-static int exynos4_spdif_cfg_gpio(struct platform_device *pdev)
-{
- s3c_gpio_cfgpin_range(EXYNOS4_GPC1(0), 2, S3C_GPIO_SFN(4));
-
- return 0;
-}
-
-static struct resource exynos4_spdif_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SPDIF, SZ_256),
- [1] = DEFINE_RES_DMA(DMACH_SPDIF),
-};
-
-static struct s3c_audio_pdata samsung_spdif_pdata = {
- .cfg_gpio = exynos4_spdif_cfg_gpio,
-};
-
-static u64 exynos4_spdif_dmamask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_spdif = {
- .name = "samsung-spdif",
- .id = -1,
- .num_resources = ARRAY_SIZE(exynos4_spdif_resource),
- .resource = exynos4_spdif_resource,
- .dev = {
- .platform_data = &samsung_spdif_pdata,
- .dma_mask = &exynos4_spdif_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
-};
diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c
deleted file mode 100644
index d5bc129e6bb7..000000000000
--- a/arch/arm/mach-exynos/dev-ohci.c
+++ /dev/null
@@ -1,52 +0,0 @@
-/* linux/arch/arm/mach-exynos/dev-ohci.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - OHCI support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <plat/devs.h>
-#include <plat/usb-phy.h>
-
-static struct resource exynos4_ohci_resource[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_OHCI, SZ_256),
- [1] = DEFINE_RES_IRQ(IRQ_USB_HOST),
-};
-
-static u64 exynos4_ohci_dma_mask = DMA_BIT_MASK(32);
-
-struct platform_device exynos4_device_ohci = {
- .name = "exynos-ohci",
- .id = -1,
- .num_resources = ARRAY_SIZE(exynos4_ohci_resource),
- .resource = exynos4_ohci_resource,
- .dev = {
- .dma_mask = &exynos4_ohci_dma_mask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- }
-};
-
-void __init exynos4_ohci_set_platdata(struct exynos4_ohci_platdata *pd)
-{
- struct exynos4_ohci_platdata *npd;
-
- npd = s3c_set_platdata(pd, sizeof(struct exynos4_ohci_platdata),
- &exynos4_device_ohci);
-
- if (!npd->phy_init)
- npd->phy_init = s5p_usb_phy_init;
- if (!npd->phy_exit)
- npd->phy_exit = s5p_usb_phy_exit;
-}
diff --git a/arch/arm/mach-exynos/dev-uart.c b/arch/arm/mach-exynos/dev-uart.c
deleted file mode 100644
index c48aff02c786..000000000000
--- a/arch/arm/mach-exynos/dev-uart.c
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Copyright (c) 2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Base EXYNOS UART resource and device definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <mach/hardware.h>
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <plat/devs.h>
-
-#define EXYNOS_UART_RESOURCE(_series, _nr) \
-static struct resource exynos##_series##_uart##_nr##_resource[] = { \
- [0] = DEFINE_RES_MEM(EXYNOS##_series##_PA_UART##_nr, EXYNOS##_series##_SZ_UART), \
- [1] = DEFINE_RES_IRQ(EXYNOS##_series##_IRQ_UART##_nr), \
-};
-
-EXYNOS_UART_RESOURCE(4, 0)
-EXYNOS_UART_RESOURCE(4, 1)
-EXYNOS_UART_RESOURCE(4, 2)
-EXYNOS_UART_RESOURCE(4, 3)
-
-struct s3c24xx_uart_resources exynos4_uart_resources[] __initdata = {
- [0] = {
- .resources = exynos4_uart0_resource,
- .nr_resources = ARRAY_SIZE(exynos4_uart0_resource),
- },
- [1] = {
- .resources = exynos4_uart1_resource,
- .nr_resources = ARRAY_SIZE(exynos4_uart1_resource),
- },
- [2] = {
- .resources = exynos4_uart2_resource,
- .nr_resources = ARRAY_SIZE(exynos4_uart2_resource),
- },
- [3] = {
- .resources = exynos4_uart3_resource,
- .nr_resources = ARRAY_SIZE(exynos4_uart3_resource),
- },
-};
diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c
deleted file mode 100644
index 87e07d6fc615..000000000000
--- a/arch/arm/mach-exynos/dma.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/* linux/arch/arm/mach-exynos4/dma.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Copyright (C) 2010 Samsung Electronics Co. Ltd.
- * Jaswinder Singh <jassi.brar@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/pl330.h>
-#include <linux/of.h>
-
-#include <asm/irq.h>
-#include <plat/devs.h>
-#include <plat/irqs.h>
-#include <plat/cpu.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-#include <mach/dma.h>
-
-static u8 exynos4210_pdma0_peri[] = {
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM2_RX,
- DMACH_PCM2_TX,
- DMACH_MSM_REQ0,
- DMACH_MSM_REQ2,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART4_RX,
- DMACH_UART4_TX,
- DMACH_SLIMBUS0_RX,
- DMACH_SLIMBUS0_TX,
- DMACH_SLIMBUS2_RX,
- DMACH_SLIMBUS2_TX,
- DMACH_SLIMBUS4_RX,
- DMACH_SLIMBUS4_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
-};
-
-static u8 exynos4212_pdma0_peri[] = {
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM2_RX,
- DMACH_PCM2_TX,
- DMACH_MIPI_HSI0,
- DMACH_MIPI_HSI1,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART4_RX,
- DMACH_UART4_TX,
- DMACH_SLIMBUS0_RX,
- DMACH_SLIMBUS0_TX,
- DMACH_SLIMBUS2_RX,
- DMACH_SLIMBUS2_TX,
- DMACH_SLIMBUS4_RX,
- DMACH_SLIMBUS4_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_MIPI_HSI4,
- DMACH_MIPI_HSI5,
-};
-
-static u8 exynos5250_pdma0_peri[] = {
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM2_RX,
- DMACH_PCM2_TX,
- DMACH_SPI0_RX,
- DMACH_SPI0_TX,
- DMACH_SPI2_RX,
- DMACH_SPI2_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S2_RX,
- DMACH_I2S2_TX,
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART2_RX,
- DMACH_UART2_TX,
- DMACH_UART4_RX,
- DMACH_UART4_TX,
- DMACH_SLIMBUS0_RX,
- DMACH_SLIMBUS0_TX,
- DMACH_SLIMBUS2_RX,
- DMACH_SLIMBUS2_TX,
- DMACH_SLIMBUS4_RX,
- DMACH_SLIMBUS4_TX,
- DMACH_AC97_MICIN,
- DMACH_AC97_PCMIN,
- DMACH_AC97_PCMOUT,
- DMACH_MIPI_HSI0,
- DMACH_MIPI_HSI2,
- DMACH_MIPI_HSI4,
- DMACH_MIPI_HSI6,
-};
-
-static struct dma_pl330_platdata exynos_pdma0_pdata;
-
-static AMBA_AHB_DEVICE(exynos_pdma0, "dma-pl330.0", 0x00041330,
- EXYNOS4_PA_PDMA0, {EXYNOS4_IRQ_PDMA0}, &exynos_pdma0_pdata);
-
-static u8 exynos4210_pdma1_peri[] = {
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_MSM_REQ1,
- DMACH_MSM_REQ3,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_SLIMBUS1_RX,
- DMACH_SLIMBUS1_TX,
- DMACH_SLIMBUS3_RX,
- DMACH_SLIMBUS3_TX,
- DMACH_SLIMBUS5_RX,
- DMACH_SLIMBUS5_TX,
-};
-
-static u8 exynos4212_pdma1_peri[] = {
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_MIPI_HSI2,
- DMACH_MIPI_HSI3,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_I2S0S_TX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_SLIMBUS1_RX,
- DMACH_SLIMBUS1_TX,
- DMACH_SLIMBUS3_RX,
- DMACH_SLIMBUS3_TX,
- DMACH_SLIMBUS5_RX,
- DMACH_SLIMBUS5_TX,
- DMACH_SLIMBUS0AUX_RX,
- DMACH_SLIMBUS0AUX_TX,
- DMACH_SPDIF,
- DMACH_MIPI_HSI6,
- DMACH_MIPI_HSI7,
-};
-
-static u8 exynos5250_pdma1_peri[] = {
- DMACH_PCM0_RX,
- DMACH_PCM0_TX,
- DMACH_PCM1_RX,
- DMACH_PCM1_TX,
- DMACH_SPI1_RX,
- DMACH_SPI1_TX,
- DMACH_PWM,
- DMACH_SPDIF,
- DMACH_I2S0S_TX,
- DMACH_I2S0_RX,
- DMACH_I2S0_TX,
- DMACH_I2S1_RX,
- DMACH_I2S1_TX,
- DMACH_UART0_RX,
- DMACH_UART0_TX,
- DMACH_UART1_RX,
- DMACH_UART1_TX,
- DMACH_UART3_RX,
- DMACH_UART3_TX,
- DMACH_SLIMBUS1_RX,
- DMACH_SLIMBUS1_TX,
- DMACH_SLIMBUS3_RX,
- DMACH_SLIMBUS3_TX,
- DMACH_SLIMBUS5_RX,
- DMACH_SLIMBUS5_TX,
- DMACH_SLIMBUS0AUX_RX,
- DMACH_SLIMBUS0AUX_TX,
- DMACH_DISP1,
- DMACH_MIPI_HSI1,
- DMACH_MIPI_HSI3,
- DMACH_MIPI_HSI5,
- DMACH_MIPI_HSI7,
-};
-
-static struct dma_pl330_platdata exynos_pdma1_pdata;
-
-static AMBA_AHB_DEVICE(exynos_pdma1, "dma-pl330.1", 0x00041330,
- EXYNOS4_PA_PDMA1, {EXYNOS4_IRQ_PDMA1}, &exynos_pdma1_pdata);
-
-static u8 mdma_peri[] = {
- DMACH_MTOM_0,
- DMACH_MTOM_1,
- DMACH_MTOM_2,
- DMACH_MTOM_3,
- DMACH_MTOM_4,
- DMACH_MTOM_5,
- DMACH_MTOM_6,
- DMACH_MTOM_7,
-};
-
-static struct dma_pl330_platdata exynos_mdma1_pdata = {
- .nr_valid_peri = ARRAY_SIZE(mdma_peri),
- .peri_id = mdma_peri,
-};
-
-static AMBA_AHB_DEVICE(exynos_mdma1, "dma-pl330.2", 0x00041330,
- EXYNOS4_PA_MDMA1, {EXYNOS4_IRQ_MDMA1}, &exynos_mdma1_pdata);
-
-static int __init exynos_dma_init(void)
-{
- if (of_have_populated_dt())
- return 0;
-
- if (soc_is_exynos4210()) {
- exynos_pdma0_pdata.nr_valid_peri =
- ARRAY_SIZE(exynos4210_pdma0_peri);
- exynos_pdma0_pdata.peri_id = exynos4210_pdma0_peri;
- exynos_pdma1_pdata.nr_valid_peri =
- ARRAY_SIZE(exynos4210_pdma1_peri);
- exynos_pdma1_pdata.peri_id = exynos4210_pdma1_peri;
-
- if (samsung_rev() == EXYNOS4210_REV_0)
- exynos_mdma1_device.res.start = EXYNOS4_PA_S_MDMA1;
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- exynos_pdma0_pdata.nr_valid_peri =
- ARRAY_SIZE(exynos4212_pdma0_peri);
- exynos_pdma0_pdata.peri_id = exynos4212_pdma0_peri;
- exynos_pdma1_pdata.nr_valid_peri =
- ARRAY_SIZE(exynos4212_pdma1_peri);
- exynos_pdma1_pdata.peri_id = exynos4212_pdma1_peri;
- } else if (soc_is_exynos5250()) {
- exynos_pdma0_pdata.nr_valid_peri =
- ARRAY_SIZE(exynos5250_pdma0_peri);
- exynos_pdma0_pdata.peri_id = exynos5250_pdma0_peri;
- exynos_pdma1_pdata.nr_valid_peri =
- ARRAY_SIZE(exynos5250_pdma1_peri);
- exynos_pdma1_pdata.peri_id = exynos5250_pdma1_peri;
-
- exynos_pdma0_device.res.start = EXYNOS5_PA_PDMA0;
- exynos_pdma0_device.res.end = EXYNOS5_PA_PDMA0 + SZ_4K;
- exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA0;
- exynos_pdma1_device.res.start = EXYNOS5_PA_PDMA1;
- exynos_pdma1_device.res.end = EXYNOS5_PA_PDMA1 + SZ_4K;
- exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_PDMA1;
- exynos_mdma1_device.res.start = EXYNOS5_PA_MDMA1;
- exynos_mdma1_device.res.end = EXYNOS5_PA_MDMA1 + SZ_4K;
- exynos_pdma0_device.irq[0] = EXYNOS5_IRQ_MDMA1;
- }
-
- dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask);
- dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask);
- amba_device_register(&exynos_pdma0_device, &iomem_resource);
-
- dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask);
- dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask);
- amba_device_register(&exynos_pdma1_device, &iomem_resource);
-
- dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask);
- amba_device_register(&exynos_mdma1_device, &iomem_resource);
-
- return 0;
-}
-arch_initcall(exynos_dma_init);
diff --git a/arch/arm/mach-exynos/firmware.c b/arch/arm/mach-exynos/firmware.c
index ed11f100d479..932129ef26c6 100644
--- a/arch/arm/mach-exynos/firmware.c
+++ b/arch/arm/mach-exynos/firmware.c
@@ -48,20 +48,18 @@ static const struct firmware_ops exynos_firmware_ops = {
void __init exynos_firmware_init(void)
{
- if (of_have_populated_dt()) {
- struct device_node *nd;
- const __be32 *addr;
+ struct device_node *nd;
+ const __be32 *addr;
- nd = of_find_compatible_node(NULL, NULL,
- "samsung,secure-firmware");
- if (!nd)
- return;
+ nd = of_find_compatible_node(NULL, NULL,
+ "samsung,secure-firmware");
+ if (!nd)
+ return;
- addr = of_get_address(nd, 0, NULL, NULL);
- if (!addr) {
- pr_err("%s: No address specified.\n", __func__);
- return;
- }
+ addr = of_get_address(nd, 0, NULL, NULL);
+ if (!addr) {
+ pr_err("%s: No address specified.\n", __func__);
+ return;
}
pr_info("Running under secure firmware.\n");
diff --git a/arch/arm/mach-exynos/include/mach/gpio.h b/arch/arm/mach-exynos/include/mach/gpio.h
deleted file mode 100644
index eb24f1eb8e3b..000000000000
--- a/arch/arm/mach-exynos/include/mach/gpio.h
+++ /dev/null
@@ -1,289 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - GPIO lib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_GPIO_H
-#define __ASM_ARCH_GPIO_H __FILE__
-
-/* Macro for EXYNOS GPIO numbering */
-
-#define EXYNOS_GPIO_NEXT(__gpio) \
- ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1)
-
-/* EXYNOS4 GPIO bank sizes */
-
-#define EXYNOS4_GPIO_A0_NR (8)
-#define EXYNOS4_GPIO_A1_NR (6)
-#define EXYNOS4_GPIO_B_NR (8)
-#define EXYNOS4_GPIO_C0_NR (5)
-#define EXYNOS4_GPIO_C1_NR (5)
-#define EXYNOS4_GPIO_D0_NR (4)
-#define EXYNOS4_GPIO_D1_NR (4)
-#define EXYNOS4_GPIO_E0_NR (5)
-#define EXYNOS4_GPIO_E1_NR (8)
-#define EXYNOS4_GPIO_E2_NR (6)
-#define EXYNOS4_GPIO_E3_NR (8)
-#define EXYNOS4_GPIO_E4_NR (8)
-#define EXYNOS4_GPIO_F0_NR (8)
-#define EXYNOS4_GPIO_F1_NR (8)
-#define EXYNOS4_GPIO_F2_NR (8)
-#define EXYNOS4_GPIO_F3_NR (6)
-#define EXYNOS4_GPIO_J0_NR (8)
-#define EXYNOS4_GPIO_J1_NR (5)
-#define EXYNOS4_GPIO_K0_NR (7)
-#define EXYNOS4_GPIO_K1_NR (7)
-#define EXYNOS4_GPIO_K2_NR (7)
-#define EXYNOS4_GPIO_K3_NR (7)
-#define EXYNOS4_GPIO_L0_NR (8)
-#define EXYNOS4_GPIO_L1_NR (3)
-#define EXYNOS4_GPIO_L2_NR (8)
-#define EXYNOS4_GPIO_X0_NR (8)
-#define EXYNOS4_GPIO_X1_NR (8)
-#define EXYNOS4_GPIO_X2_NR (8)
-#define EXYNOS4_GPIO_X3_NR (8)
-#define EXYNOS4_GPIO_Y0_NR (6)
-#define EXYNOS4_GPIO_Y1_NR (4)
-#define EXYNOS4_GPIO_Y2_NR (6)
-#define EXYNOS4_GPIO_Y3_NR (8)
-#define EXYNOS4_GPIO_Y4_NR (8)
-#define EXYNOS4_GPIO_Y5_NR (8)
-#define EXYNOS4_GPIO_Y6_NR (8)
-#define EXYNOS4_GPIO_Z_NR (7)
-
-/* EXYNOS4 GPIO bank numbers */
-
-enum exynos4_gpio_number {
- EXYNOS4_GPIO_A0_START = 0,
- EXYNOS4_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A0),
- EXYNOS4_GPIO_B_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_A1),
- EXYNOS4_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_B),
- EXYNOS4_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C0),
- EXYNOS4_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_C1),
- EXYNOS4_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D0),
- EXYNOS4_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_D1),
- EXYNOS4_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E0),
- EXYNOS4_GPIO_E2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E1),
- EXYNOS4_GPIO_E3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E2),
- EXYNOS4_GPIO_E4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E3),
- EXYNOS4_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_E4),
- EXYNOS4_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F0),
- EXYNOS4_GPIO_F2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F1),
- EXYNOS4_GPIO_F3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F2),
- EXYNOS4_GPIO_J0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_F3),
- EXYNOS4_GPIO_J1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J0),
- EXYNOS4_GPIO_K0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_J1),
- EXYNOS4_GPIO_K1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K0),
- EXYNOS4_GPIO_K2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K1),
- EXYNOS4_GPIO_K3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K2),
- EXYNOS4_GPIO_L0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_K3),
- EXYNOS4_GPIO_L1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L0),
- EXYNOS4_GPIO_L2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L1),
- EXYNOS4_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_L2),
- EXYNOS4_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X0),
- EXYNOS4_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X1),
- EXYNOS4_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X2),
- EXYNOS4_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_X3),
- EXYNOS4_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y0),
- EXYNOS4_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y1),
- EXYNOS4_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y2),
- EXYNOS4_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y3),
- EXYNOS4_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y4),
- EXYNOS4_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y5),
- EXYNOS4_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS4_GPIO_Y6),
-};
-
-/* EXYNOS4 GPIO number definitions */
-
-#define EXYNOS4_GPA0(_nr) (EXYNOS4_GPIO_A0_START + (_nr))
-#define EXYNOS4_GPA1(_nr) (EXYNOS4_GPIO_A1_START + (_nr))
-#define EXYNOS4_GPB(_nr) (EXYNOS4_GPIO_B_START + (_nr))
-#define EXYNOS4_GPC0(_nr) (EXYNOS4_GPIO_C0_START + (_nr))
-#define EXYNOS4_GPC1(_nr) (EXYNOS4_GPIO_C1_START + (_nr))
-#define EXYNOS4_GPD0(_nr) (EXYNOS4_GPIO_D0_START + (_nr))
-#define EXYNOS4_GPD1(_nr) (EXYNOS4_GPIO_D1_START + (_nr))
-#define EXYNOS4_GPE0(_nr) (EXYNOS4_GPIO_E0_START + (_nr))
-#define EXYNOS4_GPE1(_nr) (EXYNOS4_GPIO_E1_START + (_nr))
-#define EXYNOS4_GPE2(_nr) (EXYNOS4_GPIO_E2_START + (_nr))
-#define EXYNOS4_GPE3(_nr) (EXYNOS4_GPIO_E3_START + (_nr))
-#define EXYNOS4_GPE4(_nr) (EXYNOS4_GPIO_E4_START + (_nr))
-#define EXYNOS4_GPF0(_nr) (EXYNOS4_GPIO_F0_START + (_nr))
-#define EXYNOS4_GPF1(_nr) (EXYNOS4_GPIO_F1_START + (_nr))
-#define EXYNOS4_GPF2(_nr) (EXYNOS4_GPIO_F2_START + (_nr))
-#define EXYNOS4_GPF3(_nr) (EXYNOS4_GPIO_F3_START + (_nr))
-#define EXYNOS4_GPJ0(_nr) (EXYNOS4_GPIO_J0_START + (_nr))
-#define EXYNOS4_GPJ1(_nr) (EXYNOS4_GPIO_J1_START + (_nr))
-#define EXYNOS4_GPK0(_nr) (EXYNOS4_GPIO_K0_START + (_nr))
-#define EXYNOS4_GPK1(_nr) (EXYNOS4_GPIO_K1_START + (_nr))
-#define EXYNOS4_GPK2(_nr) (EXYNOS4_GPIO_K2_START + (_nr))
-#define EXYNOS4_GPK3(_nr) (EXYNOS4_GPIO_K3_START + (_nr))
-#define EXYNOS4_GPL0(_nr) (EXYNOS4_GPIO_L0_START + (_nr))
-#define EXYNOS4_GPL1(_nr) (EXYNOS4_GPIO_L1_START + (_nr))
-#define EXYNOS4_GPL2(_nr) (EXYNOS4_GPIO_L2_START + (_nr))
-#define EXYNOS4_GPX0(_nr) (EXYNOS4_GPIO_X0_START + (_nr))
-#define EXYNOS4_GPX1(_nr) (EXYNOS4_GPIO_X1_START + (_nr))
-#define EXYNOS4_GPX2(_nr) (EXYNOS4_GPIO_X2_START + (_nr))
-#define EXYNOS4_GPX3(_nr) (EXYNOS4_GPIO_X3_START + (_nr))
-#define EXYNOS4_GPY0(_nr) (EXYNOS4_GPIO_Y0_START + (_nr))
-#define EXYNOS4_GPY1(_nr) (EXYNOS4_GPIO_Y1_START + (_nr))
-#define EXYNOS4_GPY2(_nr) (EXYNOS4_GPIO_Y2_START + (_nr))
-#define EXYNOS4_GPY3(_nr) (EXYNOS4_GPIO_Y3_START + (_nr))
-#define EXYNOS4_GPY4(_nr) (EXYNOS4_GPIO_Y4_START + (_nr))
-#define EXYNOS4_GPY5(_nr) (EXYNOS4_GPIO_Y5_START + (_nr))
-#define EXYNOS4_GPY6(_nr) (EXYNOS4_GPIO_Y6_START + (_nr))
-#define EXYNOS4_GPZ(_nr) (EXYNOS4_GPIO_Z_START + (_nr))
-
-/* the end of the EXYNOS4 specific gpios */
-
-#define EXYNOS4_GPIO_END (EXYNOS4_GPZ(EXYNOS4_GPIO_Z_NR) + 1)
-
-/* EXYNOS5 GPIO bank sizes */
-
-#define EXYNOS5_GPIO_A0_NR (8)
-#define EXYNOS5_GPIO_A1_NR (6)
-#define EXYNOS5_GPIO_A2_NR (8)
-#define EXYNOS5_GPIO_B0_NR (5)
-#define EXYNOS5_GPIO_B1_NR (5)
-#define EXYNOS5_GPIO_B2_NR (4)
-#define EXYNOS5_GPIO_B3_NR (4)
-#define EXYNOS5_GPIO_C0_NR (7)
-#define EXYNOS5_GPIO_C1_NR (4)
-#define EXYNOS5_GPIO_C2_NR (7)
-#define EXYNOS5_GPIO_C3_NR (7)
-#define EXYNOS5_GPIO_C4_NR (7)
-#define EXYNOS5_GPIO_D0_NR (4)
-#define EXYNOS5_GPIO_D1_NR (8)
-#define EXYNOS5_GPIO_Y0_NR (6)
-#define EXYNOS5_GPIO_Y1_NR (4)
-#define EXYNOS5_GPIO_Y2_NR (6)
-#define EXYNOS5_GPIO_Y3_NR (8)
-#define EXYNOS5_GPIO_Y4_NR (8)
-#define EXYNOS5_GPIO_Y5_NR (8)
-#define EXYNOS5_GPIO_Y6_NR (8)
-#define EXYNOS5_GPIO_X0_NR (8)
-#define EXYNOS5_GPIO_X1_NR (8)
-#define EXYNOS5_GPIO_X2_NR (8)
-#define EXYNOS5_GPIO_X3_NR (8)
-#define EXYNOS5_GPIO_E0_NR (8)
-#define EXYNOS5_GPIO_E1_NR (2)
-#define EXYNOS5_GPIO_F0_NR (4)
-#define EXYNOS5_GPIO_F1_NR (4)
-#define EXYNOS5_GPIO_G0_NR (8)
-#define EXYNOS5_GPIO_G1_NR (8)
-#define EXYNOS5_GPIO_G2_NR (2)
-#define EXYNOS5_GPIO_H0_NR (4)
-#define EXYNOS5_GPIO_H1_NR (8)
-#define EXYNOS5_GPIO_V0_NR (8)
-#define EXYNOS5_GPIO_V1_NR (8)
-#define EXYNOS5_GPIO_V2_NR (8)
-#define EXYNOS5_GPIO_V3_NR (8)
-#define EXYNOS5_GPIO_V4_NR (2)
-#define EXYNOS5_GPIO_Z_NR (7)
-
-/* EXYNOS5 GPIO bank numbers */
-
-enum exynos5_gpio_number {
- EXYNOS5_GPIO_A0_START = 0,
- EXYNOS5_GPIO_A1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A0),
- EXYNOS5_GPIO_A2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A1),
- EXYNOS5_GPIO_B0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_A2),
- EXYNOS5_GPIO_B1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B0),
- EXYNOS5_GPIO_B2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B1),
- EXYNOS5_GPIO_B3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B2),
- EXYNOS5_GPIO_C0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_B3),
- EXYNOS5_GPIO_C1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C0),
- EXYNOS5_GPIO_C2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C1),
- EXYNOS5_GPIO_C3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C2),
- EXYNOS5_GPIO_C4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C3),
- EXYNOS5_GPIO_D0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_C4),
- EXYNOS5_GPIO_D1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D0),
- EXYNOS5_GPIO_Y0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_D1),
- EXYNOS5_GPIO_Y1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y0),
- EXYNOS5_GPIO_Y2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y1),
- EXYNOS5_GPIO_Y3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y2),
- EXYNOS5_GPIO_Y4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y3),
- EXYNOS5_GPIO_Y5_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y4),
- EXYNOS5_GPIO_Y6_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y5),
- EXYNOS5_GPIO_X0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_Y6),
- EXYNOS5_GPIO_X1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X0),
- EXYNOS5_GPIO_X2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X1),
- EXYNOS5_GPIO_X3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X2),
- EXYNOS5_GPIO_E0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_X3),
- EXYNOS5_GPIO_E1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E0),
- EXYNOS5_GPIO_F0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_E1),
- EXYNOS5_GPIO_F1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F0),
- EXYNOS5_GPIO_G0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_F1),
- EXYNOS5_GPIO_G1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G0),
- EXYNOS5_GPIO_G2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G1),
- EXYNOS5_GPIO_H0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_G2),
- EXYNOS5_GPIO_H1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H0),
- EXYNOS5_GPIO_V0_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_H1),
- EXYNOS5_GPIO_V1_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V0),
- EXYNOS5_GPIO_V2_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V1),
- EXYNOS5_GPIO_V3_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V2),
- EXYNOS5_GPIO_V4_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V3),
- EXYNOS5_GPIO_Z_START = EXYNOS_GPIO_NEXT(EXYNOS5_GPIO_V4),
-};
-
-/* EXYNOS5 GPIO number definitions */
-
-#define EXYNOS5_GPA0(_nr) (EXYNOS5_GPIO_A0_START + (_nr))
-#define EXYNOS5_GPA1(_nr) (EXYNOS5_GPIO_A1_START + (_nr))
-#define EXYNOS5_GPA2(_nr) (EXYNOS5_GPIO_A2_START + (_nr))
-#define EXYNOS5_GPB0(_nr) (EXYNOS5_GPIO_B0_START + (_nr))
-#define EXYNOS5_GPB1(_nr) (EXYNOS5_GPIO_B1_START + (_nr))
-#define EXYNOS5_GPB2(_nr) (EXYNOS5_GPIO_B2_START + (_nr))
-#define EXYNOS5_GPB3(_nr) (EXYNOS5_GPIO_B3_START + (_nr))
-#define EXYNOS5_GPC0(_nr) (EXYNOS5_GPIO_C0_START + (_nr))
-#define EXYNOS5_GPC1(_nr) (EXYNOS5_GPIO_C1_START + (_nr))
-#define EXYNOS5_GPC2(_nr) (EXYNOS5_GPIO_C2_START + (_nr))
-#define EXYNOS5_GPC3(_nr) (EXYNOS5_GPIO_C3_START + (_nr))
-#define EXYNOS5_GPC4(_nr) (EXYNOS5_GPIO_C4_START + (_nr))
-#define EXYNOS5_GPD0(_nr) (EXYNOS5_GPIO_D0_START + (_nr))
-#define EXYNOS5_GPD1(_nr) (EXYNOS5_GPIO_D1_START + (_nr))
-#define EXYNOS5_GPY0(_nr) (EXYNOS5_GPIO_Y0_START + (_nr))
-#define EXYNOS5_GPY1(_nr) (EXYNOS5_GPIO_Y1_START + (_nr))
-#define EXYNOS5_GPY2(_nr) (EXYNOS5_GPIO_Y2_START + (_nr))
-#define EXYNOS5_GPY3(_nr) (EXYNOS5_GPIO_Y3_START + (_nr))
-#define EXYNOS5_GPY4(_nr) (EXYNOS5_GPIO_Y4_START + (_nr))
-#define EXYNOS5_GPY5(_nr) (EXYNOS5_GPIO_Y5_START + (_nr))
-#define EXYNOS5_GPY6(_nr) (EXYNOS5_GPIO_Y6_START + (_nr))
-#define EXYNOS5_GPX0(_nr) (EXYNOS5_GPIO_X0_START + (_nr))
-#define EXYNOS5_GPX1(_nr) (EXYNOS5_GPIO_X1_START + (_nr))
-#define EXYNOS5_GPX2(_nr) (EXYNOS5_GPIO_X2_START + (_nr))
-#define EXYNOS5_GPX3(_nr) (EXYNOS5_GPIO_X3_START + (_nr))
-#define EXYNOS5_GPE0(_nr) (EXYNOS5_GPIO_E0_START + (_nr))
-#define EXYNOS5_GPE1(_nr) (EXYNOS5_GPIO_E1_START + (_nr))
-#define EXYNOS5_GPF0(_nr) (EXYNOS5_GPIO_F0_START + (_nr))
-#define EXYNOS5_GPF1(_nr) (EXYNOS5_GPIO_F1_START + (_nr))
-#define EXYNOS5_GPG0(_nr) (EXYNOS5_GPIO_G0_START + (_nr))
-#define EXYNOS5_GPG1(_nr) (EXYNOS5_GPIO_G1_START + (_nr))
-#define EXYNOS5_GPG2(_nr) (EXYNOS5_GPIO_G2_START + (_nr))
-#define EXYNOS5_GPH0(_nr) (EXYNOS5_GPIO_H0_START + (_nr))
-#define EXYNOS5_GPH1(_nr) (EXYNOS5_GPIO_H1_START + (_nr))
-#define EXYNOS5_GPV0(_nr) (EXYNOS5_GPIO_V0_START + (_nr))
-#define EXYNOS5_GPV1(_nr) (EXYNOS5_GPIO_V1_START + (_nr))
-#define EXYNOS5_GPV2(_nr) (EXYNOS5_GPIO_V2_START + (_nr))
-#define EXYNOS5_GPV3(_nr) (EXYNOS5_GPIO_V3_START + (_nr))
-#define EXYNOS5_GPV4(_nr) (EXYNOS5_GPIO_V4_START + (_nr))
-#define EXYNOS5_GPZ(_nr) (EXYNOS5_GPIO_Z_START + (_nr))
-
-/* the end of the EXYNOS5 specific gpios */
-
-#define EXYNOS5_GPIO_END (EXYNOS5_GPZ(EXYNOS5_GPIO_Z_NR) + 1)
-
-/* actually, EXYNOS5_GPIO_END is bigger than EXYNOS4 */
-
-#define S3C_GPIO_END (EXYNOS5_GPIO_END)
-
-/* define the number of gpios */
-
-#define ARCH_NR_GPIOS (CONFIG_SAMSUNG_GPIO_EXTRA + S3C_GPIO_END)
-
-#endif /* __ASM_ARCH_GPIO_H */
diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h
deleted file mode 100644
index c72f59d91fce..000000000000
--- a/arch/arm/mach-exynos/include/mach/irqs.h
+++ /dev/null
@@ -1,476 +0,0 @@
-/*
- * Copyright (c) 2010-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS - IRQ definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H __FILE__
-
-#include <plat/irqs.h>
-
-/* PPI: Private Peripheral Interrupt */
-
-#define IRQ_PPI(x) (x + 16)
-
-/* SPI: Shared Peripheral Interrupt */
-
-#define IRQ_SPI(x) (x + 32)
-
-/* COMBINER */
-
-#define MAX_IRQ_IN_COMBINER 8
-#define COMBINER_GROUP(x) ((x) * MAX_IRQ_IN_COMBINER + IRQ_SPI(128))
-#define COMBINER_IRQ(x, y) (COMBINER_GROUP(x) + y)
-
-/* For EXYNOS4 and EXYNOS5 */
-
-#define EXYNOS_IRQ_EINT16_31 IRQ_SPI(32)
-
-/* For EXYNOS4 SoCs */
-
-#define EXYNOS4_IRQ_EINT0 IRQ_SPI(16)
-#define EXYNOS4_IRQ_EINT1 IRQ_SPI(17)
-#define EXYNOS4_IRQ_EINT2 IRQ_SPI(18)
-#define EXYNOS4_IRQ_EINT3 IRQ_SPI(19)
-#define EXYNOS4_IRQ_EINT4 IRQ_SPI(20)
-#define EXYNOS4_IRQ_EINT5 IRQ_SPI(21)
-#define EXYNOS4_IRQ_EINT6 IRQ_SPI(22)
-#define EXYNOS4_IRQ_EINT7 IRQ_SPI(23)
-#define EXYNOS4_IRQ_EINT8 IRQ_SPI(24)
-#define EXYNOS4_IRQ_EINT9 IRQ_SPI(25)
-#define EXYNOS4_IRQ_EINT10 IRQ_SPI(26)
-#define EXYNOS4_IRQ_EINT11 IRQ_SPI(27)
-#define EXYNOS4_IRQ_EINT12 IRQ_SPI(28)
-#define EXYNOS4_IRQ_EINT13 IRQ_SPI(29)
-#define EXYNOS4_IRQ_EINT14 IRQ_SPI(30)
-#define EXYNOS4_IRQ_EINT15 IRQ_SPI(31)
-
-#define EXYNOS4_IRQ_MDMA0 IRQ_SPI(33)
-#define EXYNOS4_IRQ_MDMA1 IRQ_SPI(34)
-#define EXYNOS4_IRQ_PDMA0 IRQ_SPI(35)
-#define EXYNOS4_IRQ_PDMA1 IRQ_SPI(36)
-#define EXYNOS4_IRQ_TIMER0_VIC IRQ_SPI(37)
-#define EXYNOS4_IRQ_TIMER1_VIC IRQ_SPI(38)
-#define EXYNOS4_IRQ_TIMER2_VIC IRQ_SPI(39)
-#define EXYNOS4_IRQ_TIMER3_VIC IRQ_SPI(40)
-#define EXYNOS4_IRQ_TIMER4_VIC IRQ_SPI(41)
-#define EXYNOS4_IRQ_MCT_L0 IRQ_SPI(42)
-#define EXYNOS4_IRQ_WDT IRQ_SPI(43)
-#define EXYNOS4_IRQ_RTC_ALARM IRQ_SPI(44)
-#define EXYNOS4_IRQ_RTC_TIC IRQ_SPI(45)
-#define EXYNOS4_IRQ_GPIO_XB IRQ_SPI(46)
-#define EXYNOS4_IRQ_GPIO_XA IRQ_SPI(47)
-#define EXYNOS4_IRQ_MCT_L1 IRQ_SPI(48)
-
-#define EXYNOS4_IRQ_UART0 IRQ_SPI(52)
-#define EXYNOS4_IRQ_UART1 IRQ_SPI(53)
-#define EXYNOS4_IRQ_UART2 IRQ_SPI(54)
-#define EXYNOS4_IRQ_UART3 IRQ_SPI(55)
-#define EXYNOS4_IRQ_UART4 IRQ_SPI(56)
-#define EXYNOS4_IRQ_MCT_G0 IRQ_SPI(57)
-#define EXYNOS4_IRQ_IIC IRQ_SPI(58)
-#define EXYNOS4_IRQ_IIC1 IRQ_SPI(59)
-#define EXYNOS4_IRQ_IIC2 IRQ_SPI(60)
-#define EXYNOS4_IRQ_IIC3 IRQ_SPI(61)
-#define EXYNOS4_IRQ_IIC4 IRQ_SPI(62)
-#define EXYNOS4_IRQ_IIC5 IRQ_SPI(63)
-#define EXYNOS4_IRQ_IIC6 IRQ_SPI(64)
-#define EXYNOS4_IRQ_IIC7 IRQ_SPI(65)
-#define EXYNOS4_IRQ_SPI0 IRQ_SPI(66)
-#define EXYNOS4_IRQ_SPI1 IRQ_SPI(67)
-#define EXYNOS4_IRQ_SPI2 IRQ_SPI(68)
-
-#define EXYNOS4_IRQ_USB_HOST IRQ_SPI(70)
-#define EXYNOS4_IRQ_USB_HSOTG IRQ_SPI(71)
-#define EXYNOS4_IRQ_MODEM_IF IRQ_SPI(72)
-#define EXYNOS4_IRQ_HSMMC0 IRQ_SPI(73)
-#define EXYNOS4_IRQ_HSMMC1 IRQ_SPI(74)
-#define EXYNOS4_IRQ_HSMMC2 IRQ_SPI(75)
-#define EXYNOS4_IRQ_HSMMC3 IRQ_SPI(76)
-#define EXYNOS4_IRQ_DWMCI IRQ_SPI(77)
-
-#define EXYNOS4_IRQ_MIPI_CSIS0 IRQ_SPI(78)
-#define EXYNOS4_IRQ_MIPI_CSIS1 IRQ_SPI(80)
-
-#define EXYNOS4_IRQ_ONENAND_AUDI IRQ_SPI(82)
-#define EXYNOS4_IRQ_ROTATOR IRQ_SPI(83)
-#define EXYNOS4_IRQ_FIMC0 IRQ_SPI(84)
-#define EXYNOS4_IRQ_FIMC1 IRQ_SPI(85)
-#define EXYNOS4_IRQ_FIMC2 IRQ_SPI(86)
-#define EXYNOS4_IRQ_FIMC3 IRQ_SPI(87)
-#define EXYNOS4_IRQ_JPEG IRQ_SPI(88)
-#define EXYNOS4_IRQ_2D IRQ_SPI(89)
-#define EXYNOS4_IRQ_PCIE IRQ_SPI(90)
-
-#define EXYNOS4_IRQ_MIXER IRQ_SPI(91)
-#define EXYNOS4_IRQ_HDMI IRQ_SPI(92)
-#define EXYNOS4_IRQ_IIC_HDMIPHY IRQ_SPI(93)
-#define EXYNOS4_IRQ_MFC IRQ_SPI(94)
-#define EXYNOS4_IRQ_SDO IRQ_SPI(95)
-
-#define EXYNOS4_IRQ_AUDIO_SS IRQ_SPI(96)
-#define EXYNOS4_IRQ_I2S0 IRQ_SPI(97)
-#define EXYNOS4_IRQ_I2S1 IRQ_SPI(98)
-#define EXYNOS4_IRQ_I2S2 IRQ_SPI(99)
-#define EXYNOS4_IRQ_AC97 IRQ_SPI(100)
-
-#define EXYNOS4_IRQ_SPDIF IRQ_SPI(104)
-#define EXYNOS4_IRQ_ADC0 IRQ_SPI(105)
-#define EXYNOS4_IRQ_PEN0 IRQ_SPI(106)
-#define EXYNOS4_IRQ_ADC1 IRQ_SPI(107)
-#define EXYNOS4_IRQ_PEN1 IRQ_SPI(108)
-#define EXYNOS4_IRQ_KEYPAD IRQ_SPI(109)
-#define EXYNOS4_IRQ_POWER_PMU IRQ_SPI(110)
-#define EXYNOS4_IRQ_GPS IRQ_SPI(111)
-#define EXYNOS4_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
-#define EXYNOS4_IRQ_SLIMBUS IRQ_SPI(113)
-
-#define EXYNOS4_IRQ_TSI IRQ_SPI(115)
-#define EXYNOS4_IRQ_SATA IRQ_SPI(116)
-
-#define EXYNOS4_IRQ_PMU COMBINER_IRQ(2, 2)
-#define EXYNOS4_IRQ_PMU_CPU1 COMBINER_IRQ(3, 2)
-#define EXYNOS4_IRQ_PMU_CPU2 COMBINER_IRQ(18, 2)
-#define EXYNOS4_IRQ_PMU_CPU3 COMBINER_IRQ(19, 2)
-
-#define EXYNOS4_IRQ_TMU_TRIG0 COMBINER_IRQ(2, 4)
-#define EXYNOS4_IRQ_TMU_TRIG1 COMBINER_IRQ(3, 4)
-
-#define EXYNOS4_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(4, 0)
-#define EXYNOS4_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(4, 1)
-#define EXYNOS4_IRQ_SYSMMU_FIMC0_0 COMBINER_IRQ(4, 2)
-#define EXYNOS4_IRQ_SYSMMU_FIMC1_0 COMBINER_IRQ(4, 3)
-#define EXYNOS4_IRQ_SYSMMU_FIMC2_0 COMBINER_IRQ(4, 4)
-#define EXYNOS4_IRQ_SYSMMU_FIMC3_0 COMBINER_IRQ(4, 5)
-#define EXYNOS4_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 6)
-#define EXYNOS4_IRQ_SYSMMU_2D_0 COMBINER_IRQ(4, 7)
-
-#define EXYNOS4_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(5, 0)
-#define EXYNOS4_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(5, 1)
-#define EXYNOS4_IRQ_SYSMMU_LCD0_M0_0 COMBINER_IRQ(5, 2)
-#define EXYNOS4_IRQ_SYSMMU_LCD1_M1_0 COMBINER_IRQ(5, 3)
-#define EXYNOS4_IRQ_SYSMMU_TV_M0_0 COMBINER_IRQ(5, 4)
-#define EXYNOS4_IRQ_SYSMMU_MFC_M0_0 COMBINER_IRQ(5, 5)
-#define EXYNOS4_IRQ_SYSMMU_MFC_M1_0 COMBINER_IRQ(5, 6)
-#define EXYNOS4_IRQ_SYSMMU_PCIE_0 COMBINER_IRQ(5, 7)
-
-#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE0_0 COMBINER_IRQ(16, 0)
-#define EXYNOS4_IRQ_SYSMMU_FIMC_LITE1_0 COMBINER_IRQ(16, 1)
-#define EXYNOS4_IRQ_SYSMMU_FIMC_ISP_0 COMBINER_IRQ(16, 2)
-#define EXYNOS4_IRQ_SYSMMU_FIMC_DRC_0 COMBINER_IRQ(16, 3)
-#define EXYNOS4_IRQ_SYSMMU_FIMC_FD_0 COMBINER_IRQ(16, 4)
-#define EXYNOS4_IRQ_SYSMMU_FIMC_CX_0 COMBINER_IRQ(16, 5)
-
-#define EXYNOS4_IRQ_FIMD0_FIFO COMBINER_IRQ(11, 0)
-#define EXYNOS4_IRQ_FIMD0_VSYNC COMBINER_IRQ(11, 1)
-#define EXYNOS4_IRQ_FIMD0_SYSTEM COMBINER_IRQ(11, 2)
-
-#define EXYNOS4210_MAX_COMBINER_NR 16
-#define EXYNOS4212_MAX_COMBINER_NR 18
-#define EXYNOS4412_MAX_COMBINER_NR 20
-#define EXYNOS4_MAX_COMBINER_NR EXYNOS4412_MAX_COMBINER_NR
-
-#define EXYNOS4_IRQ_GPIO1_NR_GROUPS 16
-#define EXYNOS4_IRQ_GPIO2_NR_GROUPS 9
-
-/*
- * For Compatibility:
- * the default is for EXYNOS4, and
- * for exynos5, should be re-mapped at function
- */
-
-#define IRQ_TIMER0_VIC EXYNOS4_IRQ_TIMER0_VIC
-#define IRQ_TIMER1_VIC EXYNOS4_IRQ_TIMER1_VIC
-#define IRQ_TIMER2_VIC EXYNOS4_IRQ_TIMER2_VIC
-#define IRQ_TIMER3_VIC EXYNOS4_IRQ_TIMER3_VIC
-#define IRQ_TIMER4_VIC EXYNOS4_IRQ_TIMER4_VIC
-
-#define IRQ_WDT EXYNOS4_IRQ_WDT
-#define IRQ_RTC_ALARM EXYNOS4_IRQ_RTC_ALARM
-#define IRQ_RTC_TIC EXYNOS4_IRQ_RTC_TIC
-#define IRQ_GPIO_XB EXYNOS4_IRQ_GPIO_XB
-#define IRQ_GPIO_XA EXYNOS4_IRQ_GPIO_XA
-
-#define IRQ_IIC EXYNOS4_IRQ_IIC
-#define IRQ_IIC1 EXYNOS4_IRQ_IIC1
-#define IRQ_IIC3 EXYNOS4_IRQ_IIC3
-#define IRQ_IIC5 EXYNOS4_IRQ_IIC5
-#define IRQ_IIC6 EXYNOS4_IRQ_IIC6
-#define IRQ_IIC7 EXYNOS4_IRQ_IIC7
-
-#define IRQ_SPI0 EXYNOS4_IRQ_SPI0
-#define IRQ_SPI1 EXYNOS4_IRQ_SPI1
-#define IRQ_SPI2 EXYNOS4_IRQ_SPI2
-
-#define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST
-#define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG
-
-#define IRQ_HSMMC0 EXYNOS4_IRQ_HSMMC0
-#define IRQ_HSMMC1 EXYNOS4_IRQ_HSMMC1
-#define IRQ_HSMMC2 EXYNOS4_IRQ_HSMMC2
-#define IRQ_HSMMC3 EXYNOS4_IRQ_HSMMC3
-
-#define IRQ_MIPI_CSIS0 EXYNOS4_IRQ_MIPI_CSIS0
-
-#define IRQ_ONENAND_AUDI EXYNOS4_IRQ_ONENAND_AUDI
-
-#define IRQ_FIMC0 EXYNOS4_IRQ_FIMC0
-#define IRQ_FIMC1 EXYNOS4_IRQ_FIMC1
-#define IRQ_FIMC2 EXYNOS4_IRQ_FIMC2
-#define IRQ_FIMC3 EXYNOS4_IRQ_FIMC3
-#define IRQ_JPEG EXYNOS4_IRQ_JPEG
-#define IRQ_2D EXYNOS4_IRQ_2D
-
-#define IRQ_MIXER EXYNOS4_IRQ_MIXER
-#define IRQ_HDMI EXYNOS4_IRQ_HDMI
-#define IRQ_IIC_HDMIPHY EXYNOS4_IRQ_IIC_HDMIPHY
-#define IRQ_MFC EXYNOS4_IRQ_MFC
-#define IRQ_SDO EXYNOS4_IRQ_SDO
-
-#define IRQ_I2S0 EXYNOS4_IRQ_I2S0
-
-#define IRQ_ADC EXYNOS4_IRQ_ADC0
-#define IRQ_TC EXYNOS4_IRQ_PEN0
-
-#define IRQ_KEYPAD EXYNOS4_IRQ_KEYPAD
-
-#define IRQ_FIMD0_FIFO EXYNOS4_IRQ_FIMD0_FIFO
-#define IRQ_FIMD0_VSYNC EXYNOS4_IRQ_FIMD0_VSYNC
-#define IRQ_FIMD0_SYSTEM EXYNOS4_IRQ_FIMD0_SYSTEM
-
-#define IRQ_GPIO1_NR_GROUPS EXYNOS4_IRQ_GPIO1_NR_GROUPS
-#define IRQ_GPIO2_NR_GROUPS EXYNOS4_IRQ_GPIO2_NR_GROUPS
-
-/* For EXYNOS5 SoCs */
-
-#define EXYNOS5_IRQ_MDMA0 IRQ_SPI(33)
-#define EXYNOS5_IRQ_PDMA0 IRQ_SPI(34)
-#define EXYNOS5_IRQ_PDMA1 IRQ_SPI(35)
-#define EXYNOS5_IRQ_TIMER0_VIC IRQ_SPI(36)
-#define EXYNOS5_IRQ_TIMER1_VIC IRQ_SPI(37)
-#define EXYNOS5_IRQ_TIMER2_VIC IRQ_SPI(38)
-#define EXYNOS5_IRQ_TIMER3_VIC IRQ_SPI(39)
-#define EXYNOS5_IRQ_TIMER4_VIC IRQ_SPI(40)
-#define EXYNOS5_IRQ_RTIC IRQ_SPI(41)
-#define EXYNOS5_IRQ_WDT IRQ_SPI(42)
-#define EXYNOS5_IRQ_RTC_ALARM IRQ_SPI(43)
-#define EXYNOS5_IRQ_RTC_TIC IRQ_SPI(44)
-#define EXYNOS5_IRQ_GPIO_XB IRQ_SPI(45)
-#define EXYNOS5_IRQ_GPIO_XA IRQ_SPI(46)
-#define EXYNOS5_IRQ_GPIO IRQ_SPI(47)
-#define EXYNOS5_IRQ_IEM_IEC IRQ_SPI(48)
-#define EXYNOS5_IRQ_IEM_APC IRQ_SPI(49)
-#define EXYNOS5_IRQ_GPIO_C2C IRQ_SPI(50)
-#define EXYNOS5_IRQ_IIC IRQ_SPI(56)
-#define EXYNOS5_IRQ_IIC1 IRQ_SPI(57)
-#define EXYNOS5_IRQ_IIC2 IRQ_SPI(58)
-#define EXYNOS5_IRQ_IIC3 IRQ_SPI(59)
-#define EXYNOS5_IRQ_IIC4 IRQ_SPI(60)
-#define EXYNOS5_IRQ_IIC5 IRQ_SPI(61)
-#define EXYNOS5_IRQ_IIC6 IRQ_SPI(62)
-#define EXYNOS5_IRQ_IIC7 IRQ_SPI(63)
-#define EXYNOS5_IRQ_IIC_HDMIPHY IRQ_SPI(64)
-#define EXYNOS5_IRQ_TMU IRQ_SPI(65)
-#define EXYNOS5_IRQ_FIQ_0 IRQ_SPI(66)
-#define EXYNOS5_IRQ_FIQ_1 IRQ_SPI(67)
-#define EXYNOS5_IRQ_SPI0 IRQ_SPI(68)
-#define EXYNOS5_IRQ_SPI1 IRQ_SPI(69)
-#define EXYNOS5_IRQ_SPI2 IRQ_SPI(70)
-#define EXYNOS5_IRQ_USB_HOST IRQ_SPI(71)
-#define EXYNOS5_IRQ_USB3_DRD IRQ_SPI(72)
-#define EXYNOS5_IRQ_MIPI_HSI IRQ_SPI(73)
-#define EXYNOS5_IRQ_USB_HSOTG IRQ_SPI(74)
-#define EXYNOS5_IRQ_HSMMC0 IRQ_SPI(75)
-#define EXYNOS5_IRQ_HSMMC1 IRQ_SPI(76)
-#define EXYNOS5_IRQ_HSMMC2 IRQ_SPI(77)
-#define EXYNOS5_IRQ_HSMMC3 IRQ_SPI(78)
-#define EXYNOS5_IRQ_MIPICSI0 IRQ_SPI(79)
-#define EXYNOS5_IRQ_MIPICSI1 IRQ_SPI(80)
-#define EXYNOS5_IRQ_EFNFCON_DMA_ABORT IRQ_SPI(81)
-#define EXYNOS5_IRQ_MIPIDSI0 IRQ_SPI(82)
-#define EXYNOS5_IRQ_WDT_IOP IRQ_SPI(83)
-#define EXYNOS5_IRQ_ROTATOR IRQ_SPI(84)
-#define EXYNOS5_IRQ_GSC0 IRQ_SPI(85)
-#define EXYNOS5_IRQ_GSC1 IRQ_SPI(86)
-#define EXYNOS5_IRQ_GSC2 IRQ_SPI(87)
-#define EXYNOS5_IRQ_GSC3 IRQ_SPI(88)
-#define EXYNOS5_IRQ_JPEG IRQ_SPI(89)
-#define EXYNOS5_IRQ_EFNFCON_DMA IRQ_SPI(90)
-#define EXYNOS5_IRQ_2D IRQ_SPI(91)
-#define EXYNOS5_IRQ_EFNFCON_0 IRQ_SPI(92)
-#define EXYNOS5_IRQ_EFNFCON_1 IRQ_SPI(93)
-#define EXYNOS5_IRQ_MIXER IRQ_SPI(94)
-#define EXYNOS5_IRQ_HDMI IRQ_SPI(95)
-#define EXYNOS5_IRQ_MFC IRQ_SPI(96)
-#define EXYNOS5_IRQ_AUDIO_SS IRQ_SPI(97)
-#define EXYNOS5_IRQ_I2S0 IRQ_SPI(98)
-#define EXYNOS5_IRQ_I2S1 IRQ_SPI(99)
-#define EXYNOS5_IRQ_I2S2 IRQ_SPI(100)
-#define EXYNOS5_IRQ_AC97 IRQ_SPI(101)
-#define EXYNOS5_IRQ_PCM0 IRQ_SPI(102)
-#define EXYNOS5_IRQ_PCM1 IRQ_SPI(103)
-#define EXYNOS5_IRQ_PCM2 IRQ_SPI(104)
-#define EXYNOS5_IRQ_SPDIF IRQ_SPI(105)
-#define EXYNOS5_IRQ_ADC0 IRQ_SPI(106)
-#define EXYNOS5_IRQ_ADC1 IRQ_SPI(107)
-#define EXYNOS5_IRQ_SATA_PHY IRQ_SPI(108)
-#define EXYNOS5_IRQ_SATA_PMEMREQ IRQ_SPI(109)
-#define EXYNOS5_IRQ_CAM_C IRQ_SPI(110)
-#define EXYNOS5_IRQ_EAGLE_PMU IRQ_SPI(111)
-#define EXYNOS5_IRQ_INTFEEDCTRL_SSS IRQ_SPI(112)
-#define EXYNOS5_IRQ_DP1_INTP1 IRQ_SPI(113)
-#define EXYNOS5_IRQ_CEC IRQ_SPI(114)
-#define EXYNOS5_IRQ_SATA IRQ_SPI(115)
-
-#define EXYNOS5_IRQ_MMC44 IRQ_SPI(123)
-#define EXYNOS5_IRQ_MDMA1 IRQ_SPI(124)
-#define EXYNOS5_IRQ_FIMC_LITE0 IRQ_SPI(125)
-#define EXYNOS5_IRQ_FIMC_LITE1 IRQ_SPI(126)
-#define EXYNOS5_IRQ_RP_TIMER IRQ_SPI(127)
-
-/* EXYNOS5440 */
-
-#define EXYNOS5440_IRQ_UART0 IRQ_SPI(2)
-#define EXYNOS5440_IRQ_UART1 IRQ_SPI(3)
-
-#define EXYNOS5_IRQ_PMU COMBINER_IRQ(1, 2)
-
-#define EXYNOS5_IRQ_SYSMMU_GSC0_0 COMBINER_IRQ(2, 0)
-#define EXYNOS5_IRQ_SYSMMU_GSC0_1 COMBINER_IRQ(2, 1)
-#define EXYNOS5_IRQ_SYSMMU_GSC1_0 COMBINER_IRQ(2, 2)
-#define EXYNOS5_IRQ_SYSMMU_GSC1_1 COMBINER_IRQ(2, 3)
-#define EXYNOS5_IRQ_SYSMMU_GSC2_0 COMBINER_IRQ(2, 4)
-#define EXYNOS5_IRQ_SYSMMU_GSC2_1 COMBINER_IRQ(2, 5)
-#define EXYNOS5_IRQ_SYSMMU_GSC3_0 COMBINER_IRQ(2, 6)
-#define EXYNOS5_IRQ_SYSMMU_GSC3_1 COMBINER_IRQ(2, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_LITE2_0 COMBINER_IRQ(3, 0)
-#define EXYNOS5_IRQ_SYSMMU_LITE2_1 COMBINER_IRQ(3, 1)
-#define EXYNOS5_IRQ_SYSMMU_FIMD1_0 COMBINER_IRQ(3, 2)
-#define EXYNOS5_IRQ_SYSMMU_FIMD1_1 COMBINER_IRQ(3, 3)
-#define EXYNOS5_IRQ_SYSMMU_LITE0_0 COMBINER_IRQ(3, 4)
-#define EXYNOS5_IRQ_SYSMMU_LITE0_1 COMBINER_IRQ(3, 5)
-#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_0 COMBINER_IRQ(3, 6)
-#define EXYNOS5_IRQ_SYSMMU_SCALERPISP_1 COMBINER_IRQ(3, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_ROTATOR_0 COMBINER_IRQ(4, 0)
-#define EXYNOS5_IRQ_SYSMMU_ROTATOR_1 COMBINER_IRQ(4, 1)
-#define EXYNOS5_IRQ_SYSMMU_JPEG_0 COMBINER_IRQ(4, 2)
-#define EXYNOS5_IRQ_SYSMMU_JPEG_1 COMBINER_IRQ(4, 3)
-
-#define EXYNOS5_IRQ_SYSMMU_FD_0 COMBINER_IRQ(5, 0)
-#define EXYNOS5_IRQ_SYSMMU_FD_1 COMBINER_IRQ(5, 1)
-#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_0 COMBINER_IRQ(5, 2)
-#define EXYNOS5_IRQ_SYSMMU_SCALERCISP_1 COMBINER_IRQ(5, 3)
-#define EXYNOS5_IRQ_SYSMMU_MCUISP_0 COMBINER_IRQ(5, 4)
-#define EXYNOS5_IRQ_SYSMMU_MCUISP_1 COMBINER_IRQ(5, 5)
-#define EXYNOS5_IRQ_SYSMMU_3DNR_0 COMBINER_IRQ(5, 6)
-#define EXYNOS5_IRQ_SYSMMU_3DNR_1 COMBINER_IRQ(5, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_ARM_0 COMBINER_IRQ(6, 0)
-#define EXYNOS5_IRQ_SYSMMU_ARM_1 COMBINER_IRQ(6, 1)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_0 COMBINER_IRQ(6, 2)
-#define EXYNOS5_IRQ_SYSMMU_MFC_R_1 COMBINER_IRQ(6, 3)
-#define EXYNOS5_IRQ_SYSMMU_RTIC_0 COMBINER_IRQ(6, 4)
-#define EXYNOS5_IRQ_SYSMMU_RTIC_1 COMBINER_IRQ(6, 5)
-#define EXYNOS5_IRQ_SYSMMU_SSS_0 COMBINER_IRQ(6, 6)
-#define EXYNOS5_IRQ_SYSMMU_SSS_1 COMBINER_IRQ(6, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_MDMA0_0 COMBINER_IRQ(7, 0)
-#define EXYNOS5_IRQ_SYSMMU_MDMA0_1 COMBINER_IRQ(7, 1)
-#define EXYNOS5_IRQ_SYSMMU_MDMA1_0 COMBINER_IRQ(7, 2)
-#define EXYNOS5_IRQ_SYSMMU_MDMA1_1 COMBINER_IRQ(7, 3)
-#define EXYNOS5_IRQ_SYSMMU_TV_0 COMBINER_IRQ(7, 4)
-#define EXYNOS5_IRQ_SYSMMU_TV_1 COMBINER_IRQ(7, 5)
-
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_0 COMBINER_IRQ(8, 5)
-#define EXYNOS5_IRQ_SYSMMU_MFC_L_1 COMBINER_IRQ(8, 6)
-
-#define EXYNOS5_IRQ_SYSMMU_DIS1_0 COMBINER_IRQ(9, 4)
-#define EXYNOS5_IRQ_SYSMMU_DIS1_1 COMBINER_IRQ(9, 5)
-
-#define EXYNOS5_IRQ_DP COMBINER_IRQ(10, 3)
-#define EXYNOS5_IRQ_SYSMMU_DIS0_0 COMBINER_IRQ(10, 4)
-#define EXYNOS5_IRQ_SYSMMU_DIS0_1 COMBINER_IRQ(10, 5)
-#define EXYNOS5_IRQ_SYSMMU_ISP_0 COMBINER_IRQ(10, 6)
-#define EXYNOS5_IRQ_SYSMMU_ISP_1 COMBINER_IRQ(10, 7)
-
-#define EXYNOS5_IRQ_SYSMMU_ODC_0 COMBINER_IRQ(11, 0)
-#define EXYNOS5_IRQ_SYSMMU_ODC_1 COMBINER_IRQ(11, 1)
-#define EXYNOS5_IRQ_SYSMMU_DRC_0 COMBINER_IRQ(11, 6)
-#define EXYNOS5_IRQ_SYSMMU_DRC_1 COMBINER_IRQ(11, 7)
-
-#define EXYNOS5_IRQ_MDMA1_ABORT COMBINER_IRQ(13, 1)
-
-#define EXYNOS5_IRQ_MDMA0_ABORT COMBINER_IRQ(15, 3)
-
-#define EXYNOS5_IRQ_FIMD1_FIFO COMBINER_IRQ(18, 4)
-#define EXYNOS5_IRQ_FIMD1_VSYNC COMBINER_IRQ(18, 5)
-#define EXYNOS5_IRQ_FIMD1_SYSTEM COMBINER_IRQ(18, 6)
-
-#define EXYNOS5_IRQ_ARMIOP_GIC COMBINER_IRQ(19, 0)
-#define EXYNOS5_IRQ_ARMISP_GIC COMBINER_IRQ(19, 1)
-#define EXYNOS5_IRQ_IOP_GIC COMBINER_IRQ(19, 3)
-#define EXYNOS5_IRQ_ISP_GIC COMBINER_IRQ(19, 4)
-
-#define EXYNOS5_IRQ_PMU_CPU1 COMBINER_IRQ(22, 4)
-
-#define EXYNOS5_IRQ_EINT0 COMBINER_IRQ(23, 0)
-
-#define EXYNOS5_IRQ_EINT1 COMBINER_IRQ(24, 0)
-#define EXYNOS5_IRQ_SYSMMU_LITE1_0 COMBINER_IRQ(24, 1)
-#define EXYNOS5_IRQ_SYSMMU_LITE1_1 COMBINER_IRQ(24, 2)
-#define EXYNOS5_IRQ_SYSMMU_2D_0 COMBINER_IRQ(24, 5)
-#define EXYNOS5_IRQ_SYSMMU_2D_1 COMBINER_IRQ(24, 6)
-
-#define EXYNOS5_IRQ_EINT2 COMBINER_IRQ(25, 0)
-#define EXYNOS5_IRQ_EINT3 COMBINER_IRQ(25, 1)
-
-#define EXYNOS5_IRQ_EINT4 COMBINER_IRQ(26, 0)
-#define EXYNOS5_IRQ_EINT5 COMBINER_IRQ(26, 1)
-
-#define EXYNOS5_IRQ_EINT6 COMBINER_IRQ(27, 0)
-#define EXYNOS5_IRQ_EINT7 COMBINER_IRQ(27, 1)
-
-#define EXYNOS5_IRQ_EINT8 COMBINER_IRQ(28, 0)
-#define EXYNOS5_IRQ_EINT9 COMBINER_IRQ(28, 1)
-
-#define EXYNOS5_IRQ_EINT10 COMBINER_IRQ(29, 0)
-#define EXYNOS5_IRQ_EINT11 COMBINER_IRQ(29, 1)
-
-#define EXYNOS5_IRQ_EINT12 COMBINER_IRQ(30, 0)
-#define EXYNOS5_IRQ_EINT13 COMBINER_IRQ(30, 1)
-
-#define EXYNOS5_IRQ_EINT14 COMBINER_IRQ(31, 0)
-#define EXYNOS5_IRQ_EINT15 COMBINER_IRQ(31, 1)
-
-#define EXYNOS5_MAX_COMBINER_NR 32
-
-#define EXYNOS5_IRQ_GPIO1_NR_GROUPS 14
-#define EXYNOS5_IRQ_GPIO2_NR_GROUPS 9
-#define EXYNOS5_IRQ_GPIO3_NR_GROUPS 5
-#define EXYNOS5_IRQ_GPIO4_NR_GROUPS 1
-
-#define MAX_COMBINER_NR (EXYNOS4_MAX_COMBINER_NR > EXYNOS5_MAX_COMBINER_NR ? \
- EXYNOS4_MAX_COMBINER_NR : EXYNOS5_MAX_COMBINER_NR)
-
-#define S5P_EINT_BASE1 COMBINER_IRQ(MAX_COMBINER_NR, 0)
-#define S5P_EINT_BASE2 (S5P_EINT_BASE1 + 16)
-#define S5P_GPIOINT_BASE (S5P_EINT_BASE1 + 32)
-#define IRQ_GPIO_END (S5P_GPIOINT_BASE + S5P_GPIOINT_COUNT)
-#define IRQ_TIMER_BASE (IRQ_GPIO_END + 64)
-
-/* Set the default NR_IRQS */
-#define EXYNOS_NR_IRQS (IRQ_TIMER_BASE + IRQ_TIMER_COUNT)
-
-#ifndef CONFIG_SPARSE_IRQ
-#define NR_IRQS EXYNOS_NR_IRQS
-#endif
-
-#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h
index 92b29bb583cb..7b046b59d9ec 100644
--- a/arch/arm/mach-exynos/include/mach/map.h
+++ b/arch/arm/mach-exynos/include/mach/map.h
@@ -30,31 +30,6 @@
#define EXYNOS4x12_PA_SYSRAM_NS 0x0204F000
#define EXYNOS5250_PA_SYSRAM_NS 0x0204F000
-#define EXYNOS4_PA_FIMC0 0x11800000
-#define EXYNOS4_PA_FIMC1 0x11810000
-#define EXYNOS4_PA_FIMC2 0x11820000
-#define EXYNOS4_PA_FIMC3 0x11830000
-
-#define EXYNOS4_PA_JPEG 0x11840000
-
-/* x = 0...1 */
-#define EXYNOS4_PA_FIMC_LITE(x) (0x12390000 + ((x) * 0x10000))
-
-#define EXYNOS4_PA_G2D 0x12800000
-
-#define EXYNOS4_PA_I2S0 0x03830000
-#define EXYNOS4_PA_I2S1 0xE3100000
-#define EXYNOS4_PA_I2S2 0xE2A00000
-
-#define EXYNOS4_PA_PCM0 0x03840000
-#define EXYNOS4_PA_PCM1 0x13980000
-#define EXYNOS4_PA_PCM2 0x13990000
-
-#define EXYNOS4_PA_SROM_BANK(x) (0x04000000 + ((x) * 0x01000000))
-
-#define EXYNOS4_PA_ONENAND 0x0C000000
-#define EXYNOS4_PA_ONENAND_DMA 0x0C600000
-
#define EXYNOS_PA_CHIPID 0x10000000
#define EXYNOS4_PA_SYSCON 0x10010000
@@ -71,10 +46,6 @@
#define EXYNOS4_PA_WATCHDOG 0x10060000
#define EXYNOS5_PA_WATCHDOG 0x101D0000
-#define EXYNOS4_PA_RTC 0x10070000
-
-#define EXYNOS4_PA_KEYPAD 0x100A0000
-
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_DMC1 0x10410000
@@ -87,207 +58,22 @@
#define EXYNOS5_PA_GIC_DIST 0x10481000
#define EXYNOS4_PA_COREPERI 0x10500000
-#define EXYNOS4_PA_TWD 0x10500600
#define EXYNOS4_PA_L2CC 0x10502000
-#define EXYNOS4_PA_TMU 0x100C0000
-
-#define EXYNOS4_PA_MDMA0 0x10810000
-#define EXYNOS4_PA_MDMA1 0x12850000
-#define EXYNOS4_PA_S_MDMA1 0x12840000
-#define EXYNOS4_PA_PDMA0 0x12680000
-#define EXYNOS4_PA_PDMA1 0x12690000
-#define EXYNOS5_PA_MDMA0 0x10800000
-#define EXYNOS5_PA_MDMA1 0x11C10000
-#define EXYNOS5_PA_PDMA0 0x121A0000
-#define EXYNOS5_PA_PDMA1 0x121B0000
-
-#define EXYNOS4_PA_SYSMMU_MDMA 0x10A40000
-#define EXYNOS4_PA_SYSMMU_2D_ACP 0x10A40000
-#define EXYNOS4_PA_SYSMMU_SSS 0x10A50000
-#define EXYNOS4_PA_SYSMMU_FIMC0 0x11A20000
-#define EXYNOS4_PA_SYSMMU_FIMC1 0x11A30000
-#define EXYNOS4_PA_SYSMMU_FIMC2 0x11A40000
-#define EXYNOS4_PA_SYSMMU_FIMC3 0x11A50000
-#define EXYNOS4_PA_SYSMMU_JPEG 0x11A60000
-#define EXYNOS4_PA_SYSMMU_FIMD0 0x11E20000
-#define EXYNOS4_PA_SYSMMU_FIMD1 0x12220000
-#define EXYNOS4_PA_SYSMMU_FIMC_ISP 0x12260000
-#define EXYNOS4_PA_SYSMMU_FIMC_DRC 0x12270000
-#define EXYNOS4_PA_SYSMMU_FIMC_FD 0x122A0000
-#define EXYNOS4_PA_SYSMMU_ISPCPU 0x122B0000
-#define EXYNOS4_PA_SYSMMU_FIMC_LITE0 0x123B0000
-#define EXYNOS4_PA_SYSMMU_FIMC_LITE1 0x123C0000
-#define EXYNOS4_PA_SYSMMU_PCIe 0x12620000
-#define EXYNOS4_PA_SYSMMU_G2D 0x12A20000
-#define EXYNOS4_PA_SYSMMU_ROTATOR 0x12A30000
-#define EXYNOS4_PA_SYSMMU_MDMA2 0x12A40000
-#define EXYNOS4_PA_SYSMMU_TV 0x12E20000
-#define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000
-#define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000
-
-#define EXYNOS5_PA_GSC0 0x13E00000
-#define EXYNOS5_PA_GSC1 0x13E10000
-#define EXYNOS5_PA_GSC2 0x13E20000
-#define EXYNOS5_PA_GSC3 0x13E30000
-
-#define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000
-#define EXYNOS5_PA_SYSMMU_SSS 0x10A50000
-#define EXYNOS5_PA_SYSMMU_2D 0x10A60000
-#define EXYNOS5_PA_SYSMMU_MFC_L 0x11200000
-#define EXYNOS5_PA_SYSMMU_MFC_R 0x11210000
-#define EXYNOS5_PA_SYSMMU_ROTATOR 0x11D40000
-#define EXYNOS5_PA_SYSMMU_MDMA2 0x11D50000
-#define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000
-#define EXYNOS5_PA_SYSMMU_IOP 0x12360000
-#define EXYNOS5_PA_SYSMMU_RTIC 0x12370000
-#define EXYNOS5_PA_SYSMMU_ISP 0x13260000
-#define EXYNOS5_PA_SYSMMU_DRC 0x12370000
-#define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000
-#define EXYNOS5_PA_SYSMMU_SCALERP 0x13290000
-#define EXYNOS5_PA_SYSMMU_FD 0x132A0000
-#define EXYNOS5_PA_SYSMMU_ISPCPU 0x132B0000
-#define EXYNOS5_PA_SYSMMU_ODC 0x132C0000
-#define EXYNOS5_PA_SYSMMU_DIS0 0x132D0000
-#define EXYNOS5_PA_SYSMMU_DIS1 0x132E0000
-#define EXYNOS5_PA_SYSMMU_3DNR 0x132F0000
-#define EXYNOS5_PA_SYSMMU_LITE0 0x13C40000
-#define EXYNOS5_PA_SYSMMU_LITE1 0x13C50000
-#define EXYNOS5_PA_SYSMMU_GSC0 0x13E80000
-#define EXYNOS5_PA_SYSMMU_GSC1 0x13E90000
-#define EXYNOS5_PA_SYSMMU_GSC2 0x13EA0000
-#define EXYNOS5_PA_SYSMMU_GSC3 0x13EB0000
-#define EXYNOS5_PA_SYSMMU_FIMD1 0x14640000
-#define EXYNOS5_PA_SYSMMU_TV 0x14650000
-
-#define EXYNOS4_PA_SPI0 0x13920000
-#define EXYNOS4_PA_SPI1 0x13930000
-#define EXYNOS4_PA_SPI2 0x13940000
-#define EXYNOS5_PA_SPI0 0x12D20000
-#define EXYNOS5_PA_SPI1 0x12D30000
-#define EXYNOS5_PA_SPI2 0x12D40000
-
-#define EXYNOS4_PA_GPIO1 0x11400000
-#define EXYNOS4_PA_GPIO2 0x11000000
-#define EXYNOS4_PA_GPIO3 0x03860000
-#define EXYNOS5_PA_GPIO1 0x11400000
-#define EXYNOS5_PA_GPIO2 0x13400000
-#define EXYNOS5_PA_GPIO3 0x10D10000
-#define EXYNOS5_PA_GPIO4 0x03860000
-
-#define EXYNOS4_PA_MIPI_CSIS0 0x11880000
-#define EXYNOS4_PA_MIPI_CSIS1 0x11890000
-
-#define EXYNOS4_PA_FIMD0 0x11C00000
-
-#define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000))
-#define EXYNOS4_PA_DWMCI 0x12550000
-#define EXYNOS5_PA_DWMCI0 0x12200000
-#define EXYNOS5_PA_DWMCI1 0x12210000
-#define EXYNOS5_PA_DWMCI2 0x12220000
-#define EXYNOS5_PA_DWMCI3 0x12230000
-
-#define EXYNOS4_PA_HSOTG 0x12480000
-#define EXYNOS4_PA_USB_HSPHY 0x125B0000
-
-#define EXYNOS4_PA_SATA 0x12560000
-#define EXYNOS4_PA_SATAPHY 0x125D0000
-#define EXYNOS4_PA_SATAPHY_CTRL 0x126B0000
-
#define EXYNOS4_PA_SROMC 0x12570000
#define EXYNOS5_PA_SROMC 0x12250000
-#define EXYNOS4_PA_EHCI 0x12580000
-#define EXYNOS4_PA_OHCI 0x12590000
#define EXYNOS4_PA_HSPHY 0x125B0000
-#define EXYNOS4_PA_MFC 0x13400000
#define EXYNOS4_PA_UART 0x13800000
#define EXYNOS5_PA_UART 0x12C00000
-#define EXYNOS4_PA_VP 0x12C00000
-#define EXYNOS4_PA_MIXER 0x12C10000
-#define EXYNOS4_PA_SDO 0x12C20000
-#define EXYNOS4_PA_HDMI 0x12D00000
-#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000
-
-#define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000))
-#define EXYNOS5_PA_IIC(x) (0x12C60000 + ((x) * 0x10000))
-
-#define EXYNOS4_PA_ADC 0x13910000
-#define EXYNOS4_PA_ADC1 0x13911000
-
-#define EXYNOS4_PA_AC97 0x139A0000
-
-#define EXYNOS4_PA_SPDIF 0x139B0000
-
#define EXYNOS4_PA_TIMER 0x139D0000
#define EXYNOS5_PA_TIMER 0x12DD0000
-#define EXYNOS4_PA_SDRAM 0x40000000
-#define EXYNOS5_PA_SDRAM 0x40000000
-
-/* Compatibiltiy Defines */
-
-#define S3C_PA_HSMMC0 EXYNOS4_PA_HSMMC(0)
-#define S3C_PA_HSMMC1 EXYNOS4_PA_HSMMC(1)
-#define S3C_PA_HSMMC2 EXYNOS4_PA_HSMMC(2)
-#define S3C_PA_HSMMC3 EXYNOS4_PA_HSMMC(3)
-#define S3C_PA_IIC EXYNOS4_PA_IIC(0)
-#define S3C_PA_IIC1 EXYNOS4_PA_IIC(1)
-#define S3C_PA_IIC2 EXYNOS4_PA_IIC(2)
-#define S3C_PA_IIC3 EXYNOS4_PA_IIC(3)
-#define S3C_PA_IIC4 EXYNOS4_PA_IIC(4)
-#define S3C_PA_IIC5 EXYNOS4_PA_IIC(5)
-#define S3C_PA_IIC6 EXYNOS4_PA_IIC(6)
-#define S3C_PA_IIC7 EXYNOS4_PA_IIC(7)
-#define S3C_PA_RTC EXYNOS4_PA_RTC
-#define S3C_PA_WDT EXYNOS4_PA_WATCHDOG
-#define S3C_PA_SPI0 EXYNOS4_PA_SPI0
-#define S3C_PA_SPI1 EXYNOS4_PA_SPI1
-#define S3C_PA_SPI2 EXYNOS4_PA_SPI2
-#define S3C_PA_USB_HSOTG EXYNOS4_PA_HSOTG
-
-#define S5P_PA_EHCI EXYNOS4_PA_EHCI
-#define S5P_PA_FIMC0 EXYNOS4_PA_FIMC0
-#define S5P_PA_FIMC1 EXYNOS4_PA_FIMC1
-#define S5P_PA_FIMC2 EXYNOS4_PA_FIMC2
-#define S5P_PA_FIMC3 EXYNOS4_PA_FIMC3
-#define S5P_PA_JPEG EXYNOS4_PA_JPEG
-#define S5P_PA_G2D EXYNOS4_PA_G2D
-#define S5P_PA_FIMD0 EXYNOS4_PA_FIMD0
-#define S5P_PA_HDMI EXYNOS4_PA_HDMI
-#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY
-#define S5P_PA_MFC EXYNOS4_PA_MFC
-#define S5P_PA_MIPI_CSIS0 EXYNOS4_PA_MIPI_CSIS0
-#define S5P_PA_MIPI_CSIS1 EXYNOS4_PA_MIPI_CSIS1
-#define S5P_PA_MIXER EXYNOS4_PA_MIXER
-#define S5P_PA_ONENAND EXYNOS4_PA_ONENAND
-#define S5P_PA_ONENAND_DMA EXYNOS4_PA_ONENAND_DMA
-#define S5P_PA_SDO EXYNOS4_PA_SDO
-#define S5P_PA_SDRAM EXYNOS4_PA_SDRAM
-#define S5P_PA_VP EXYNOS4_PA_VP
-
-#define SAMSUNG_PA_ADC EXYNOS4_PA_ADC
-#define SAMSUNG_PA_ADC1 EXYNOS4_PA_ADC1
-#define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD
-
/* Compatibility UART */
-#define EXYNOS4_PA_UART0 0x13800000
-#define EXYNOS4_PA_UART1 0x13810000
-#define EXYNOS4_PA_UART2 0x13820000
-#define EXYNOS4_PA_UART3 0x13830000
-#define EXYNOS4_SZ_UART SZ_256
-
-#define EXYNOS5_PA_UART0 0x12C00000
-#define EXYNOS5_PA_UART1 0x12C10000
-#define EXYNOS5_PA_UART2 0x12C20000
-#define EXYNOS5_PA_UART3 0x12C30000
-
#define EXYNOS5440_PA_UART0 0x000B0000
-#define EXYNOS5440_PA_UART1 0x000C0000
-#define EXYNOS5440_SZ_UART SZ_256
#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
diff --git a/arch/arm/mach-exynos/include/mach/pm-core.h b/arch/arm/mach-exynos/include/mach/pm-core.h
index 296090e7f423..2b00833b6641 100644
--- a/arch/arm/mach-exynos/include/mach/pm-core.h
+++ b/arch/arm/mach-exynos/include/mach/pm-core.h
@@ -34,12 +34,7 @@ static inline void s3c_pm_debug_init_uart(void)
static inline void s3c_pm_arch_prepare_irqs(void)
{
- u32 eintmask = s3c_irqwake_eintmask;
-
- if (of_have_populated_dt())
- eintmask = exynos_get_eint_wake_mask();
-
- __raw_writel(eintmask, S5P_EINT_WAKEUP_MASK);
+ __raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
}
@@ -69,4 +64,9 @@ static inline void samsung_pm_saved_gpios(void)
/* nothing here yet */
}
+/* Compatibility definitions to make plat-samsung/pm.c compile */
+#define IRQ_EINT_BIT(x) 1
+#define s3c_irqwake_intallow 0
+#define s3c_irqwake_eintallow 0
+
#endif /* __ASM_ARCH_PM_CORE_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-gpio.h b/arch/arm/mach-exynos/include/mach/regs-gpio.h
deleted file mode 100644
index e4b5b60dcb85..000000000000
--- a/arch/arm/mach-exynos/include/mach/regs-gpio.h
+++ /dev/null
@@ -1,40 +0,0 @@
-/* linux/arch/arm/mach-exynos4/include/mach/regs-gpio.h
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - GPIO (including EINT) register definitions
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_REGS_GPIO_H
-#define __ASM_ARCH_REGS_GPIO_H __FILE__
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#define EINT_REG_NR(x) (EINT_OFFSET(x) >> 3)
-#define EINT_CON(b, x) (b + 0xE00 + (EINT_REG_NR(x) * 4))
-#define EINT_FLTCON(b, x) (b + 0xE80 + (EINT_REG_NR(x) * 4))
-#define EINT_MASK(b, x) (b + 0xF00 + (EINT_REG_NR(x) * 4))
-#define EINT_PEND(b, x) (b + 0xF40 + (EINT_REG_NR(x) * 4))
-
-#define EINT_OFFSET_BIT(x) (1 << (EINT_OFFSET(x) & 0x7))
-
-/* compatibility for plat-s5p/irq-pm.c */
-#define EXYNOS4_EINT40CON (S5P_VA_GPIO2 + 0xE00)
-#define S5P_EINT_CON(x) (EXYNOS4_EINT40CON + ((x) * 0x4))
-
-#define EXYNOS4_EINT40FLTCON0 (S5P_VA_GPIO2 + 0xE80)
-#define S5P_EINT_FLTCON(x) (EXYNOS4_EINT40FLTCON0 + ((x) * 0x4))
-
-#define EXYNOS4_EINT40MASK (S5P_VA_GPIO2 + 0xF00)
-#define S5P_EINT_MASK(x) (EXYNOS4_EINT40MASK + ((x) * 0x4))
-
-#define EXYNOS4_EINT40PEND (S5P_VA_GPIO2 + 0xF40)
-#define S5P_EINT_PEND(x) (EXYNOS4_EINT40PEND + ((x) * 0x4))
-
-#endif /* __ASM_ARCH_REGS_GPIO_H */
diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
deleted file mode 100644
index 07277735252e..000000000000
--- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h
+++ /dev/null
@@ -1,74 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __PLAT_S5P_REGS_USB_PHY_H
-#define __PLAT_S5P_REGS_USB_PHY_H
-
-#define EXYNOS4_HSOTG_PHYREG(x) ((x) + S3C_VA_USB_HSPHY)
-
-#define EXYNOS4_PHYPWR EXYNOS4_HSOTG_PHYREG(0x00)
-#define PHY1_HSIC_NORMAL_MASK (0xf << 9)
-#define PHY1_HSIC1_SLEEP (1 << 12)
-#define PHY1_HSIC1_FORCE_SUSPEND (1 << 11)
-#define PHY1_HSIC0_SLEEP (1 << 10)
-#define PHY1_HSIC0_FORCE_SUSPEND (1 << 9)
-
-#define PHY1_STD_NORMAL_MASK (0x7 << 6)
-#define PHY1_STD_SLEEP (1 << 8)
-#define PHY1_STD_ANALOG_POWERDOWN (1 << 7)
-#define PHY1_STD_FORCE_SUSPEND (1 << 6)
-
-#define PHY0_NORMAL_MASK (0x39 << 0)
-#define PHY0_SLEEP (1 << 5)
-#define PHY0_OTG_DISABLE (1 << 4)
-#define PHY0_ANALOG_POWERDOWN (1 << 3)
-#define PHY0_FORCE_SUSPEND (1 << 0)
-
-#define EXYNOS4_PHYCLK EXYNOS4_HSOTG_PHYREG(0x04)
-#define PHY1_COMMON_ON_N (1 << 7)
-#define PHY0_COMMON_ON_N (1 << 4)
-#define PHY0_ID_PULLUP (1 << 2)
-
-#define EXYNOS4_CLKSEL_SHIFT (0)
-
-#define EXYNOS4210_CLKSEL_MASK (0x3 << 0)
-#define EXYNOS4210_CLKSEL_48M (0x0 << 0)
-#define EXYNOS4210_CLKSEL_12M (0x2 << 0)
-#define EXYNOS4210_CLKSEL_24M (0x3 << 0)
-
-#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0)
-#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0)
-#define EXYNOS4X12_CLKSEL_10M (0x1 << 0)
-#define EXYNOS4X12_CLKSEL_12M (0x2 << 0)
-#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0)
-#define EXYNOS4X12_CLKSEL_20M (0x4 << 0)
-#define EXYNOS4X12_CLKSEL_24M (0x5 << 0)
-
-#define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08)
-#define HOST_LINK_PORT_SWRST_MASK (0xf << 6)
-#define HOST_LINK_PORT2_SWRST (1 << 9)
-#define HOST_LINK_PORT1_SWRST (1 << 8)
-#define HOST_LINK_PORT0_SWRST (1 << 7)
-#define HOST_LINK_ALL_SWRST (1 << 6)
-
-#define PHY1_SWRST_MASK (0x7 << 3)
-#define PHY1_HSIC_SWRST (1 << 5)
-#define PHY1_STD_SWRST (1 << 4)
-#define PHY1_ALL_SWRST (1 << 3)
-
-#define PHY0_SWRST_MASK (0x7 << 0)
-#define PHY0_PHYLINK_SWRST (1 << 2)
-#define PHY0_HLINK_SWRST (1 << 1)
-#define PHY0_SWRST (1 << 0)
-
-#define EXYNOS4_PHY1CON EXYNOS4_HSOTG_PHYREG(0x34)
-#define FPENABLEN (1 << 0)
-
-#endif /* __PLAT_S5P_REGS_USB_PHY_H */
diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c
deleted file mode 100644
index 5f0f55701374..000000000000
--- a/arch/arm/mach-exynos/mach-armlex4210.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-armlex4210.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/io.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/smsc911x.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ARMLEX4210_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ARMLEX4210_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ARMLEX4210_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg armlex4210_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ARMLEX4210_UCON_DEFAULT,
- .ulcon = ARMLEX4210_ULCON_DEFAULT,
- .ufcon = ARMLEX4210_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPX2(5),
- .ext_cd_gpio_invert = 1,
- .max_width = 4,
-};
-
-static struct s3c_sdhci_platdata armlex4210_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_PERMANENT,
- .max_width = 4,
-};
-
-static void __init armlex4210_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&armlex4210_hsmmc0_pdata);
- s3c_sdhci2_set_platdata(&armlex4210_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&armlex4210_hsmmc3_pdata);
-}
-
-static void __init armlex4210_wlan_init(void)
-{
- /* enable */
- s3c_gpio_cfgpin(EXYNOS4_GPX2(0), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX2(0), S3C_GPIO_PULL_UP);
-
- /* reset */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(6), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(6), S3C_GPIO_PULL_UP);
-
- /* wakeup */
- s3c_gpio_cfgpin(EXYNOS4_GPX1(5), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX1(5), S3C_GPIO_PULL_UP);
-}
-
-static struct resource armlex4210_smsc911x_resources[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(3), SZ_64K),
- [1] = DEFINE_RES_NAMED(IRQ_EINT(27), 1, NULL, IORESOURCE_IRQ \
- | IRQF_TRIGGER_HIGH),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device armlex4210_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(armlex4210_smsc911x_resources),
- .resource = armlex4210_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static struct platform_device *armlex4210_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_rtc,
- &s3c_device_wdt,
- &armlex4210_smsc911x,
- &exynos4_device_ahci,
-};
-
-static void __init armlex4210_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (0 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__ADDRMODE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-static void __init armlex4210_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(armlex4210_uartcfgs,
- ARRAY_SIZE(armlex4210_uartcfgs));
-}
-
-static void __init armlex4210_machine_init(void)
-{
- armlex4210_smsc911x_init();
-
- armlex4210_sdhci_init();
-
- armlex4210_wlan_init();
-
- platform_add_devices(armlex4210_devices,
- ARRAY_SIZE(armlex4210_devices));
-}
-
-MACHINE_START(ARMLEX4210, "ARMLEX4210")
- /* Maintainer: Alim Akhtar <alim.akhtar@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = armlex4210_map_io,
- .init_machine = armlex4210_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index b9ed834a7eee..0099c6c13bba 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -23,11 +23,6 @@
#include "common.h"
-static void __init exynos4_dt_map_io(void)
-{
- exynos_init_io(NULL, 0);
-}
-
static void __init exynos4_dt_machine_init(void)
{
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
@@ -55,8 +50,7 @@ static void __init exynos4_reserve(void)
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = exynos4_dt_map_io,
+ .map_io = exynos_init_io,
.init_early = exynos_firmware_init,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c
index 753b94f3fca7..d5c8afdeaa39 100644
--- a/arch/arm/mach-exynos/mach-exynos5-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos5-dt.c
@@ -23,11 +23,6 @@
#include "common.h"
-static void __init exynos5_dt_map_io(void)
-{
- exynos_init_io(NULL, 0);
-}
-
static void __init exynos5_dt_machine_init(void)
{
struct device_node *i2c_np;
@@ -76,9 +71,8 @@ static void __init exynos5_reserve(void)
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .init_irq = exynos5_init_irq,
.smp = smp_ops(exynos_smp_ops),
- .map_io = exynos5_dt_map_io,
+ .map_io = exynos_init_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
.init_time = exynos_init_time,
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
deleted file mode 100644
index 5c8b2878dbbd..000000000000
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ /dev/null
@@ -1,1388 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-nuri.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/i2c-gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/power/max8903_charger.h>
-#include <linux/power/max17042_battery.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mfd/max8997-private.h>
-#include <linux/mmc/host.h>
-#include <linux/fb.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <drm/exynos_drm.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-#include <media/s5p_fimc.h>
-#include <media/v4l2-mediabus.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <plat/adc.h>
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/mfc.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define NURI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define NURI_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define NURI_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG256 | \
- S5PV210_UFCON_RXTRIG256)
-
-enum fixed_regulator_id {
- FIXED_REG_ID_MMC = 0,
- FIXED_REG_ID_MAX8903,
- FIXED_REG_ID_CAM_A28V,
- FIXED_REG_ID_CAM_12V,
- FIXED_REG_ID_CAM_VT_15V,
-};
-
-static struct s3c2410_uartcfg nuri_uartcfgs[] __initdata = {
- {
- .hwport = 0,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 1,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 2,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
- {
- .hwport = 3,
- .ucon = NURI_UCON_DEFAULT,
- .ulcon = NURI_ULCON_DEFAULT,
- .ufcon = NURI_UFCON_DEFAULT,
- },
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata nuri_hsmmc0_data __initdata = {
- .max_width = 8,
- .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
- MMC_CAP_ERASE),
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply emmc_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
- REGULATOR_SUPPLY("vmmc", "dw_mmc"),
-};
-
-static struct regulator_init_data emmc_fixed_voltage_init_data = {
- .constraints = {
- .name = "VMEM_VDD_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(emmc_supplies),
- .consumer_supplies = emmc_supplies,
-};
-
-static struct fixed_voltage_config emmc_fixed_voltage_config = {
- .supply_name = "MASSMEMORY_EN (inverted)",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPL1(1),
- .enable_high = false,
- .init_data = &emmc_fixed_voltage_init_data,
-};
-
-static struct platform_device emmc_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MMC,
- .dev = {
- .platform_data = &emmc_fixed_voltage_config,
- },
-};
-
-/* SD */
-static struct s3c_sdhci_platdata nuri_hsmmc2_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .ext_cd_gpio = EXYNOS4_GPX3(3), /* XEINT_27 */
- .ext_cd_gpio_invert = 1,
- .cd_type = S3C_SDHCI_CD_GPIO,
-};
-
-/* WLAN */
-static struct s3c_sdhci_platdata nuri_hsmmc3_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init nuri_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&nuri_hsmmc0_data);
- s3c_sdhci2_set_platdata(&nuri_hsmmc2_data);
- s3c_sdhci3_set_platdata(&nuri_hsmmc3_data);
-}
-
-/* GPIO KEYS */
-static struct gpio_keys_button nuri_gpio_keys_tables[] = {
- {
- .code = KEY_VOLUMEUP,
- .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
- .desc = "gpio-keys: KEY_VOLUMEUP",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_VOLUMEDOWN,
- .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
- .desc = "gpio-keys: KEY_VOLUMEDOWN",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_POWER,
- .gpio = EXYNOS4_GPX2(7), /* XEINT23 */
- .desc = "gpio-keys: KEY_POWER",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data nuri_gpio_keys_data = {
- .buttons = nuri_gpio_keys_tables,
- .nbuttons = ARRAY_SIZE(nuri_gpio_keys_tables),
-};
-
-static struct platform_device nuri_gpio_keys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &nuri_gpio_keys_data,
- },
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .xres = 1024,
- .yres = 600,
- .hsync_len = 40,
- .left_margin = 79,
- .right_margin = 200,
- .vsync_len = 10,
- .upper_margin = 10,
- .lower_margin = 11,
- .refresh = 60,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 3,
- .bpp = 32,
-};
-
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win nuri_fb_win0 = {
- .max_bpp = 24,
- .default_bpp = 16,
- .xres = 1024,
- .yres = 600,
- .virtual_x = 1024,
- .virtual_y = 2 * 600,
-};
-
-static struct fb_videomode nuri_lcd_timing = {
- .left_margin = 64,
- .right_margin = 16,
- .upper_margin = 64,
- .lower_margin = 1,
- .hsync_len = 48,
- .vsync_len = 3,
- .xres = 1024,
- .yres = 600,
- .refresh = 60,
-};
-
-static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
- .win[0] = &nuri_fb_win0,
- .vtiming = &nuri_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power)
-{
- int gpio = EXYNOS4_GPE1(5);
-
- gpio_request(gpio, "LVDS_nSHDN");
- gpio_direction_output(gpio, power);
- gpio_free(gpio);
-}
-
-static int nuri_bl_init(struct device *dev)
-{
- return gpio_request_one(EXYNOS4_GPE2(3), GPIOF_OUT_INIT_LOW,
- "LCD_LD0_EN");
-}
-
-static int nuri_bl_notify(struct device *dev, int brightness)
-{
- if (brightness < 1)
- brightness = 0;
-
- gpio_set_value(EXYNOS4_GPE2(3), 1);
-
- return brightness;
-}
-
-static void nuri_bl_exit(struct device *dev)
-{
- gpio_free(EXYNOS4_GPE2(3));
-}
-
-/* nuri pwm backlight */
-static struct platform_pwm_backlight_data nuri_backlight_data = {
- .pwm_id = 0,
- .pwm_period_ns = 30000,
- .max_brightness = 100,
- .dft_brightness = 50,
- .init = nuri_bl_init,
- .notify = nuri_bl_notify,
- .exit = nuri_bl_exit,
-};
-
-static struct platform_device nuri_backlight_device = {
- .name = "pwm-backlight",
- .id = -1,
- .dev = {
- .parent = &s3c_device_timer[0].dev,
- .platform_data = &nuri_backlight_data,
- },
-};
-
-static struct plat_lcd_data nuri_lcd_platform_data = {
- .set_power = nuri_lcd_power_on,
-};
-
-static struct platform_device nuri_lcd_device = {
- .name = "platform-lcd",
- .id = -1,
- .dev = {
- .platform_data = &nuri_lcd_platform_data,
- },
-};
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- /* Gyro, To be updated */
-};
-
-/* TSP */
-static struct mxt_platform_data mxt_platform_data = {
- .x_line = 18,
- .y_line = 11,
- .x_size = 1024,
- .y_size = 600,
- .blen = 0x1,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
- .orient = MXT_DIAGONAL_COUNTER,
- .irqflags = IRQF_TRIGGER_FALLING,
-};
-
-static struct s3c2410_platform_i2c i2c3_data __initdata = {
- .flags = 0,
- .bus_num = 3,
- .slave_addr = 0x10,
- .frequency = 400 * 1000,
- .sda_delay = 100,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
- {
- I2C_BOARD_INFO("atmel_mxt_ts", 0x4a),
- .platform_data = &mxt_platform_data,
- .irq = IRQ_EINT(4),
- },
-};
-
-static void __init nuri_tsp_init(void)
-{
- int gpio;
-
- /* TOUCH_INT: XEINT_4 */
- gpio = EXYNOS4_GPX0(4);
- gpio_request(gpio, "TOUCH_INT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
-}
-
-static struct regulator_consumer_supply __initdata max8997_ldo1_[] = {
- REGULATOR_SUPPLY("vdd", "s5p-adc"), /* Used by CPU's ADC drv */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo3_[] = {
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* USB */
- REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo4_[] = {
- REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo5_[] = {
- REGULATOR_SUPPLY("vhsic", "modemctl"), /* MODEM */
-};
-static struct regulator_consumer_supply nuri_max8997_ldo6_consumer[] = {
- REGULATOR_SUPPLY("vdd_reg", "6-003c"), /* S5K6AA camera */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo7_[] = {
- REGULATOR_SUPPLY("dig_18", "0-001f"), /* HCD803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo8_[] = {
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* USB */
- REGULATOR_SUPPLY("vdac", NULL), /* Used by CPU */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo11_[] = {
- REGULATOR_SUPPLY("vcc", "platform-lcd"), /* U804 LVDS */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo12_[] = {
- REGULATOR_SUPPLY("vddio", "6-003c"), /* HDC802 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo13_[] = {
- REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.2"), /* TFLASH */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo14_[] = {
- REGULATOR_SUPPLY("inmotor", "max8997-haptic"),
-};
-static struct regulator_consumer_supply __initdata max8997_ldo15_[] = {
- REGULATOR_SUPPLY("avdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo16_[] = {
- REGULATOR_SUPPLY("d_sensor", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_ldo18_[] = {
- REGULATOR_SUPPLY("vdd", "3-004a"), /* Touch Screen */
-};
-static struct regulator_consumer_supply __initdata max8997_buck1_[] = {
- REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck2_[] = {
- REGULATOR_SUPPLY("vdd_int", "exynos4210-busfreq.0"), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata max8997_buck3_[] = {
- REGULATOR_SUPPLY("vdd", "mali_dev.0"), /* G3D of Exynos 4 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck4_[] = {
- REGULATOR_SUPPLY("core", "0-001f"), /* HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_buck6_[] = {
- REGULATOR_SUPPLY("dig_28", "0-001f"), /* pin "7" of HDC803 */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout1_[] = {
- REGULATOR_SUPPLY("usb_vbus", NULL), /* CPU's USB OTG */
-};
-static struct regulator_consumer_supply __initdata max8997_esafeout2_[] = {
- REGULATOR_SUPPLY("usb_vbus", "modemctl"), /* VBUS of Modem */
-};
-
-static struct regulator_consumer_supply __initdata max8997_charger_[] = {
- REGULATOR_SUPPLY("vinchg1", "charger-manager.0"),
-};
-static struct regulator_consumer_supply __initdata max8997_chg_toff_[] = {
- REGULATOR_SUPPLY("vinchg_stop", NULL), /* for jack interrupt handlers */
-};
-
-static struct regulator_consumer_supply __initdata max8997_32khz_ap_[] = {
- REGULATOR_SUPPLY("gps_clk", "bcm4751"),
- REGULATOR_SUPPLY("bt_clk", "bcm4330-b1"),
- REGULATOR_SUPPLY("wifi_clk", "bcm433-b1"),
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
- .constraints = {
- .name = "VADC_3.3V_C210",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo1_),
- .consumer_supplies = max8997_ldo1_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
- .constraints = {
- .name = "VUSB_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo3_),
- .consumer_supplies = max8997_ldo3_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo4_),
- .consumer_supplies = max8997_ldo4_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo5_data = {
- .constraints = {
- .name = "VHSIC_1.2V_C210",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo5_),
- .consumer_supplies = max8997_ldo5_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
- .constraints = {
- .name = "VCC_1.8V_PDA",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(nuri_max8997_ldo6_consumer),
- .consumer_supplies = nuri_max8997_ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
- .constraints = {
- .name = "CAM_ISP_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo7_),
- .consumer_supplies = max8997_ldo7_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
- .constraints = {
- .name = "VUSB+VDAC_3.3V_C210",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo8_),
- .consumer_supplies = max8997_ldo8_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
- .constraints = {
- .name = "VCC_2.8V_PDA",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V_C210",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
- .constraints = {
- .name = "LVDS_VDD3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo11_),
- .consumer_supplies = max8997_ldo11_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo12_data = {
- .constraints = {
- .name = "VT_CAM_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo12_),
- .consumer_supplies = max8997_ldo12_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo13_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo13_),
- .consumer_supplies = max8997_ldo13_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
- .constraints = {
- .name = "VCC_3.0V_MOTOR",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo14_),
- .consumer_supplies = max8997_ldo14_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo15_data = {
- .constraints = {
- .name = "VTOUCH_ADVV2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo15_),
- .consumer_supplies = max8997_ldo15_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo16_data = {
- .constraints = {
- .name = "CAM_SENSOR_IO_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo16_),
- .consumer_supplies = max8997_ldo16_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo18_data = {
- .constraints = {
- .name = "VTOUCH_VDD2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_ldo18_),
- .consumer_supplies = max8997_ldo18_,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
- .constraints = {
- .name = "VDDQ_M1M2_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
- .constraints = {
- .name = "VARM_1.2V_C210",
- .min_uV = 900000,
- .max_uV = 1350000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck1_),
- .consumer_supplies = max8997_buck1_,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
- .constraints = {
- .name = "VINT_1.1V_C210",
- .min_uV = 900000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck2_),
- .consumer_supplies = max8997_buck2_,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
- .constraints = {
- .name = "VG3D_1.1V_C210",
- .min_uV = 900000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck3_),
- .consumer_supplies = max8997_buck3_,
-};
-
-static struct regulator_init_data __initdata max8997_buck4_data = {
- .constraints = {
- .name = "CAM_ISP_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck4_),
- .consumer_supplies = max8997_buck4_,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
- .constraints = {
- .name = "VMEM_1.2V_C210",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck6_data = {
- .constraints = {
- .name = "CAM_AF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_buck6_),
- .consumer_supplies = max8997_buck6_,
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
- .constraints = {
- .name = "VCC_SUB_2.0V",
- .min_uV = 2000000,
- .max_uV = 2000000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_32khz_ap_data = {
- .constraints = {
- .name = "32KHz AP",
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_32khz_ap_),
- .consumer_supplies = max8997_32khz_ap_,
-};
-
-static struct regulator_init_data __initdata max8997_32khz_cp_data = {
- .constraints = {
- .name = "32KHz CP",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_vichg_data = {
- .constraints = {
- .name = "VICHG",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_esafeout1_data = {
- .constraints = {
- .name = "SAFEOUT1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout1_),
- .consumer_supplies = max8997_esafeout1_,
-};
-
-static struct regulator_init_data __initdata max8997_esafeout2_data = {
- .constraints = {
- .name = "SAFEOUT2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_esafeout2_),
- .consumer_supplies = max8997_esafeout2_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_cv_data = {
- .constraints = {
- .name = "CHARGER_CV",
- .min_uV = 4200000,
- .max_uV = 4200000,
- .apply_uV = 1,
- },
-};
-
-static struct regulator_init_data __initdata max8997_charger_data = {
- .constraints = {
- .name = "CHARGER",
- .min_uA = 200000,
- .max_uA = 950000,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_charger_),
- .consumer_supplies = max8997_charger_,
-};
-
-static struct regulator_init_data __initdata max8997_charger_topoff_data = {
- .constraints = {
- .name = "CHARGER TOPOFF",
- .min_uA = 50000,
- .max_uA = 200000,
- .valid_ops_mask = REGULATOR_CHANGE_CURRENT,
- },
- .num_consumer_supplies = ARRAY_SIZE(max8997_chg_toff_),
- .consumer_supplies = max8997_chg_toff_,
-};
-
-static struct max8997_regulator_data __initdata nuri_max8997_regulators[] = {
- { MAX8997_LDO1, &max8997_ldo1_data },
- { MAX8997_LDO2, &max8997_ldo2_data },
- { MAX8997_LDO3, &max8997_ldo3_data },
- { MAX8997_LDO4, &max8997_ldo4_data },
- { MAX8997_LDO5, &max8997_ldo5_data },
- { MAX8997_LDO6, &max8997_ldo6_data },
- { MAX8997_LDO7, &max8997_ldo7_data },
- { MAX8997_LDO8, &max8997_ldo8_data },
- { MAX8997_LDO9, &max8997_ldo9_data },
- { MAX8997_LDO10, &max8997_ldo10_data },
- { MAX8997_LDO11, &max8997_ldo11_data },
- { MAX8997_LDO12, &max8997_ldo12_data },
- { MAX8997_LDO13, &max8997_ldo13_data },
- { MAX8997_LDO14, &max8997_ldo14_data },
- { MAX8997_LDO15, &max8997_ldo15_data },
- { MAX8997_LDO16, &max8997_ldo16_data },
-
- { MAX8997_LDO18, &max8997_ldo18_data },
- { MAX8997_LDO21, &max8997_ldo21_data },
-
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
- { MAX8997_BUCK4, &max8997_buck4_data },
- { MAX8997_BUCK5, &max8997_buck5_data },
- { MAX8997_BUCK6, &max8997_buck6_data },
- { MAX8997_BUCK7, &max8997_buck7_data },
-
- { MAX8997_EN32KHZ_AP, &max8997_32khz_ap_data },
- { MAX8997_EN32KHZ_CP, &max8997_32khz_cp_data },
-
- { MAX8997_ENVICHG, &max8997_vichg_data },
- { MAX8997_ESAFEOUT1, &max8997_esafeout1_data },
- { MAX8997_ESAFEOUT2, &max8997_esafeout2_data },
- { MAX8997_CHARGER_CV, &max8997_charger_cv_data },
- { MAX8997_CHARGER, &max8997_charger_data },
- { MAX8997_CHARGER_TOPOFF, &max8997_charger_topoff_data },
-};
-
-static struct max8997_platform_data __initdata nuri_max8997_pdata = {
- .wakeup = 1,
-
- .num_regulators = ARRAY_SIZE(nuri_max8997_regulators),
- .regulators = nuri_max8997_regulators,
-
- .buck125_gpios = { EXYNOS4_GPX0(5), EXYNOS4_GPX0(6), EXYNOS4_GPL0(0) },
-
- .buck1_voltage[0] = 1350000, /* 1.35V */
- .buck1_voltage[1] = 1300000, /* 1.3V */
- .buck1_voltage[2] = 1250000, /* 1.25V */
- .buck1_voltage[3] = 1200000, /* 1.2V */
- .buck1_voltage[4] = 1150000, /* 1.15V */
- .buck1_voltage[5] = 1100000, /* 1.1V */
- .buck1_voltage[6] = 1000000, /* 1.0V */
- .buck1_voltage[7] = 950000, /* 0.95V */
-
- .buck2_voltage[0] = 1100000, /* 1.1V */
- .buck2_voltage[1] = 1000000, /* 1.0V */
- .buck2_voltage[2] = 950000, /* 0.95V */
- .buck2_voltage[3] = 900000, /* 0.9V */
- .buck2_voltage[4] = 1100000, /* 1.1V */
- .buck2_voltage[5] = 1000000, /* 1.0V */
- .buck2_voltage[6] = 950000, /* 0.95V */
- .buck2_voltage[7] = 900000, /* 0.9V */
-
- .buck5_voltage[0] = 1200000, /* 1.2V */
- .buck5_voltage[1] = 1200000, /* 1.2V */
- .buck5_voltage[2] = 1200000, /* 1.2V */
- .buck5_voltage[3] = 1200000, /* 1.2V */
- .buck5_voltage[4] = 1200000, /* 1.2V */
- .buck5_voltage[5] = 1200000, /* 1.2V */
- .buck5_voltage[6] = 1200000, /* 1.2V */
- .buck5_voltage[7] = 1200000, /* 1.2V */
-};
-
-/* GPIO I2C 5 (PMIC) */
-enum { I2C5_MAX8997 };
-static struct i2c_board_info i2c5_devs[] __initdata = {
- [I2C5_MAX8997] = {
- I2C_BOARD_INFO("max8997", 0xCC >> 1),
- .platform_data = &nuri_max8997_pdata,
- },
-};
-
-static struct max17042_platform_data nuri_battery_platform_data = {
-};
-
-/* GPIO I2C 9 (Fuel Gauge) */
-static struct i2c_gpio_platform_data i2c9_gpio_data = {
- .sda_pin = EXYNOS4_GPY4(0), /* XM0ADDR_8 */
- .scl_pin = EXYNOS4_GPY4(1), /* XM0ADDR_9 */
-};
-static struct platform_device i2c9_gpio = {
- .name = "i2c-gpio",
- .id = 9,
- .dev = {
- .platform_data = &i2c9_gpio_data,
- },
-};
-enum { I2C9_MAX17042};
-static struct i2c_board_info i2c9_devs[] __initdata = {
- [I2C9_MAX17042] = {
- I2C_BOARD_INFO("max17042", 0x36),
- .platform_data = &nuri_battery_platform_data,
- },
-};
-
-/* MAX8903 Secondary Charger */
-static struct regulator_consumer_supply supplies_max8903[] = {
- REGULATOR_SUPPLY("vinchg2", "charger-manager.0"),
-};
-
-static struct regulator_init_data max8903_charger_en_data = {
- .constraints = {
- .name = "VOUT_CHARGER",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- },
- .num_consumer_supplies = ARRAY_SIZE(supplies_max8903),
- .consumer_supplies = supplies_max8903,
-};
-
-static struct fixed_voltage_config max8903_charger_en = {
- .supply_name = "VOUT_CHARGER",
- .microvolts = 5000000, /* Assume 5VDC */
- .gpio = EXYNOS4_GPY4(5), /* TA_EN negaged */
- .enable_high = 0, /* Enable = Low */
- .enabled_at_boot = 1,
- .init_data = &max8903_charger_en_data,
-};
-
-static struct platform_device max8903_fixed_reg_dev = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MAX8903,
- .dev = { .platform_data = &max8903_charger_en },
-};
-
-static struct max8903_pdata nuri_max8903 = {
- /*
- * cen: don't control with the driver, let it be
- * controlled by regulator above
- */
- .dok = EXYNOS4_GPX1(4), /* TA_nCONNECTED */
- /* uok, usus: not connected */
- .chg = EXYNOS4_GPE2(0), /* TA_nCHG */
- /* flt: vcc_1.8V_pda */
- .dcm = EXYNOS4_GPL0(1), /* CURR_ADJ */
-
- .dc_valid = true,
- .usb_valid = false, /* USB is not wired to MAX8903 */
-};
-
-static struct platform_device nuri_max8903_device = {
- .name = "max8903-charger",
- .dev = {
- .platform_data = &nuri_max8903,
- },
-};
-
-static void __init nuri_power_init(void)
-{
- int gpio;
- int ta_en = 0;
-
- gpio = EXYNOS4_GPX0(7);
- gpio_request(gpio, "AP_PMIC_IRQ");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- gpio = EXYNOS4_GPX2(3);
- gpio_request(gpio, "FUEL_ALERT");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
-
- gpio = nuri_max8903.dok;
- gpio_request(gpio, "TA_nCONNECTED");
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- ta_en = gpio_get_value(gpio) ? 0 : 1;
-
- gpio = nuri_max8903.chg;
- gpio_request(gpio, "TA_nCHG");
- gpio_direction_input(gpio);
-
- gpio = nuri_max8903.dcm;
- gpio_request(gpio, "CURR_ADJ");
- gpio_direction_output(gpio, ta_en);
-}
-
-/* USB EHCI */
-static struct s5p_ehci_platdata nuri_ehci_pdata;
-
-static void __init nuri_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &nuri_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat nuri_hsotg_pdata;
-
-/* CAMERA */
-static struct regulator_consumer_supply cam_vt_cam15_supply =
- REGULATOR_SUPPLY("vdd_core", "6-003c");
-
-static struct regulator_init_data cam_vt_cam15_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_vt_cam15_supply,
-};
-
-static struct fixed_voltage_config cam_vt_cam15_fixed_voltage_cfg = {
- .supply_name = "VT_CAM_1.5V",
- .microvolts = 1500000,
- .gpio = EXYNOS4_GPE2(2), /* VT_CAM_1.5V_EN */
- .enable_high = 1,
- .init_data = &cam_vt_cam15_reg_init_data,
-};
-
-static struct platform_device cam_vt_cam15_fixed_rdev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_15V,
- .dev = { .platform_data = &cam_vt_cam15_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_vdda_supply[] = {
- REGULATOR_SUPPLY("vdda", "6-003c"),
- REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data cam_vdda_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = ARRAY_SIZE(cam_vdda_supply),
- .consumer_supplies = cam_vdda_supply,
-};
-
-static struct fixed_voltage_config cam_vdda_fixed_voltage_cfg = {
- .supply_name = "CAM_IO_EN",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE2(1), /* CAM_IO_EN */
- .enable_high = 1,
- .init_data = &cam_vdda_reg_init_data,
-};
-
-static struct platform_device cam_vdda_fixed_rdev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_A28V,
- .dev = { .platform_data = &cam_vdda_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply camera_8m_12v_supply =
- REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data cam_8m_12v_reg_init_data = {
- .num_consumer_supplies = 1,
- .consumer_supplies = &camera_8m_12v_supply,
- .constraints = {
- .valid_ops_mask = REGULATOR_CHANGE_STATUS
- },
-};
-
-static struct fixed_voltage_config cam_8m_12v_fixed_voltage_cfg = {
- .supply_name = "8M_1.2V",
- .microvolts = 1200000,
- .gpio = EXYNOS4_GPE2(5), /* 8M_1.2V_EN */
- .enable_high = 1,
- .init_data = &cam_8m_12v_reg_init_data,
-};
-
-static struct platform_device cam_8m_12v_fixed_rdev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_12V,
- .dev = { .platform_data = &cam_8m_12v_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
- .clk_rate = 166000000UL,
- .lanes = 2,
- .hs_settle = 12,
-};
-
-#define GPIO_CAM_MEGA_RST EXYNOS4_GPY3(7) /* ISP_RESET */
-#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPL2(5)
-#define GPIO_CAM_VT_NSTBY EXYNOS4_GPL2(0)
-#define GPIO_CAM_VT_NRST EXYNOS4_GPL2(1)
-
-static struct s5k6aa_platform_data s5k6aa_pldata = {
- .mclk_frequency = 24000000UL,
- .gpio_reset = { GPIO_CAM_VT_NRST, 0 },
- .gpio_stby = { GPIO_CAM_VT_NSTBY, 0 },
- .bus_type = V4L2_MBUS_PARALLEL,
- .horiz_flip = 1,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
- I2C_BOARD_INFO("S5K6AA", 0x3c),
- .platform_data = &s5k6aa_pldata,
-};
-
-static struct m5mols_platform_data m5mols_platdata = {
- .gpio_reset = GPIO_CAM_MEGA_RST,
-};
-
-static struct i2c_board_info m5mols_board_info = {
- I2C_BOARD_INFO("M5MOLS", 0x1F),
- .platform_data = &m5mols_platdata,
-};
-
-static struct fimc_source_info nuri_camera_sensors[] = {
- {
- .flags = V4L2_MBUS_PCLK_SAMPLE_RISING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
- .board_info = &s5k6aa_board_info,
- .clk_frequency = 24000000UL,
- .i2c_bus_num = 6,
- }, {
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
- .board_info = &m5mols_board_info,
- .clk_frequency = 24000000UL,
- },
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
- .source_info = nuri_camera_sensors,
- .num_clients = ARRAY_SIZE(nuri_camera_sensors),
-};
-
-static struct gpio nuri_camera_gpios[] = {
- { GPIO_CAM_VT_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
- { GPIO_CAM_VT_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
- { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
- { GPIO_CAM_MEGA_RST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
-};
-
-static void __init nuri_camera_init(void)
-{
- s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
- &s5p_device_mipi_csis0);
- s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
- &s5p_device_fimc_md);
-
- if (gpio_request_array(nuri_camera_gpios,
- ARRAY_SIZE(nuri_camera_gpios))) {
- pr_err("%s: GPIO request failed\n", __func__);
- return;
- }
-
- m5mols_board_info.irq = s5p_register_gpio_interrupt(GPIO_CAM_8M_ISP_INT);
- if (m5mols_board_info.irq >= 0)
- s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xF));
- else
- pr_err("%s: Failed to configure 8M_ISP_INT GPIO\n", __func__);
-
- /* Free GPIOs controlled directly by the sensor drivers. */
- gpio_free(GPIO_CAM_VT_NRST);
- gpio_free(GPIO_CAM_VT_NSTBY);
- gpio_free(GPIO_CAM_MEGA_RST);
-
- if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) {
- pr_err("%s: Camera port A setup failed\n", __func__);
- return;
- }
- /* Increase drive strength of the sensor clock output */
- s5p_gpio_set_drvstr(EXYNOS4_GPJ1(3), S5P_GPIO_DRVSTR_LV4);
-}
-
-static struct s3c2410_platform_i2c nuri_i2c6_platdata __initdata = {
- .frequency = 400000U,
- .sda_delay = 200,
- .bus_num = 6,
-};
-
-static struct s3c2410_platform_i2c nuri_i2c0_platdata __initdata = {
- .frequency = 400000U,
- .sda_delay = 200,
-};
-
-/* DEVFREQ controlling memory/bus */
-static struct platform_device exynos4_bus_devfreq = {
- .name = "exynos4210-busfreq",
-};
-
-static struct platform_device *nuri_devices[] __initdata = {
- /* Samsung Platform Devices */
- &s3c_device_i2c5, /* PMIC should initialize first */
- &s3c_device_i2c0,
- &s3c_device_i2c6,
- &emmc_fixed_voltage,
- &s5p_device_mipi_csis0,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimd0,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_wdt,
- &s3c_device_timer[0],
- &s5p_device_ehci,
- &s3c_device_i2c3,
- &i2c9_gpio,
- &s3c_device_adc,
- &s5p_device_g2d,
- &s5p_device_jpeg,
- &s3c_device_rtc,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &s5p_device_fimc_md,
- &s3c_device_usb_hsotg,
-
- /* NURI Devices */
- &nuri_gpio_keys,
- &nuri_lcd_device,
- &nuri_backlight_device,
- &max8903_fixed_reg_dev,
- &nuri_max8903_device,
- &cam_vt_cam15_fixed_rdev,
- &cam_vdda_fixed_rdev,
- &cam_8m_12v_fixed_rdev,
- &exynos4_bus_devfreq,
-};
-
-static void __init nuri_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs));
- xxti_f = 0;
- xusbxti_f = 24000000;
-}
-
-static void __init nuri_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init nuri_machine_init(void)
-{
- nuri_sdhci_init();
- nuri_tsp_init();
- nuri_power_init();
-
- s3c_i2c0_set_platdata(&nuri_i2c0_platdata);
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
- s3c_i2c3_set_platdata(&i2c3_data);
- i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
- s3c_i2c5_set_platdata(NULL);
- i2c5_devs[I2C5_MAX8997].irq = gpio_to_irq(EXYNOS4_GPX0(7));
- i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
- i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3));
- i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs));
- s3c_i2c6_set_platdata(&nuri_i2c6_platdata);
-
-#ifdef CONFIG_DRM_EXYNOS
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&nuri_fb_pdata);
-#endif
-
- nuri_camera_init();
-
- nuri_ehci_init();
- s3c_hsotg_set_platdata(&nuri_hsotg_pdata);
-
- /* Last */
- platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices));
-}
-
-MACHINE_START(NURI, "NURI")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = nuri_map_io,
- .init_machine = nuri_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &nuri_reserve,
- .restart = exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
deleted file mode 100644
index 27f03ed5d067..000000000000
--- a/arch/arm/mach-exynos/mach-origen.c
+++ /dev/null
@@ -1,823 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-origen.c
- *
- * Copyright (c) 2011 Insignal Co., Ltd.
- * http://www.insignal.co.kr/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/leds.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/gpio_keys.h>
-#include <linux/i2c.h>
-#include <linux/regulator/machine.h>
-#include <linux/mfd/max8997.h>
-#include <linux/lcd.h>
-#include <linux/rfkill-gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-
-#include <plat/regs-serial.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/sdhci.h>
-#include <plat/clock.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/hdmi.h>
-
-#include <mach/map.h>
-#include <mach/irqs.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define ORIGEN_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define ORIGEN_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define ORIGEN_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = ORIGEN_UCON_DEFAULT,
- .ulcon = ORIGEN_ULCON_DEFAULT,
- .ufcon = ORIGEN_UFCON_DEFAULT,
- },
-};
-
-static struct regulator_consumer_supply __initdata ldo3_consumer[] = {
- REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"), /* MIPI */
- REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), /* HDMI */
- REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), /* HDMI */
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"), /* OTG */
-};
-static struct regulator_consumer_supply __initdata ldo6_consumer[] = {
- REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"), /* MIPI */
-};
-static struct regulator_consumer_supply __initdata ldo7_consumer[] = {
- REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo8_consumer[] = {
- REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */
- REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), /* HDMI */
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), /* OTG */
-};
-static struct regulator_consumer_supply __initdata ldo9_consumer[] = {
- REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo11_consumer[] = {
- REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */
-};
-static struct regulator_consumer_supply __initdata ldo14_consumer[] = {
- REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata ldo17_consumer[] = {
- REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */
-};
-static struct regulator_consumer_supply __initdata buck1_consumer[] = {
- REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck2_consumer[] = {
- REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */
-};
-static struct regulator_consumer_supply __initdata buck3_consumer[] = {
- REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */
-};
-static struct regulator_consumer_supply __initdata buck7_consumer[] = {
- REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */
-};
-
-static struct regulator_init_data __initdata max8997_ldo1_data = {
- .constraints = {
- .name = "VDD_ABB_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo2_data = {
- .constraints = {
- .name = "VDD_ALIVE_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo3_data = {
- .constraints = {
- .name = "VMIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer),
- .consumer_supplies = ldo3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo4_data = {
- .constraints = {
- .name = "VDD_RTC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo6_data = {
- .constraints = {
- .name = "VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer),
- .consumer_supplies = ldo6_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo7_data = {
- .constraints = {
- .name = "VDD_AUD_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer),
- .consumer_supplies = ldo7_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo8_data = {
- .constraints = {
- .name = "VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer),
- .consumer_supplies = ldo8_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo9_data = {
- .constraints = {
- .name = "DVDD_SWB_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer),
- .consumer_supplies = ldo9_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo10_data = {
- .constraints = {
- .name = "VDD_PLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_ldo11_data = {
- .constraints = {
- .name = "VDD_AUD_3V",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer),
- .consumer_supplies = ldo11_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo14_data = {
- .constraints = {
- .name = "AVDD18_SWB_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer),
- .consumer_supplies = ldo14_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo17_data = {
- .constraints = {
- .name = "VDD_SWB_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer),
- .consumer_supplies = ldo17_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_ldo21_data = {
- .constraints = {
- .name = "VDD_MIF_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck1_data = {
- .constraints = {
- .name = "VDD_ARM_1.2V",
- .min_uV = 950000,
- .max_uV = 1350000,
- .always_on = 1,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
- .consumer_supplies = buck1_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck2_data = {
- .constraints = {
- .name = "VDD_INT_1.1V",
- .min_uV = 900000,
- .max_uV = 1100000,
- .always_on = 1,
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
- .consumer_supplies = buck2_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck3_data = {
- .constraints = {
- .name = "VDD_G3D_1.1V",
- .min_uV = 900000,
- .max_uV = 1100000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck3_consumer),
- .consumer_supplies = buck3_consumer,
-};
-
-static struct regulator_init_data __initdata max8997_buck5_data = {
- .constraints = {
- .name = "VDDQ_M1M2_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data __initdata max8997_buck7_data = {
- .constraints = {
- .name = "VDD_LCD_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .boot_on = 1,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(buck7_consumer),
- .consumer_supplies = buck7_consumer,
-};
-
-static struct max8997_regulator_data __initdata origen_max8997_regulators[] = {
- { MAX8997_LDO1, &max8997_ldo1_data },
- { MAX8997_LDO2, &max8997_ldo2_data },
- { MAX8997_LDO3, &max8997_ldo3_data },
- { MAX8997_LDO4, &max8997_ldo4_data },
- { MAX8997_LDO6, &max8997_ldo6_data },
- { MAX8997_LDO7, &max8997_ldo7_data },
- { MAX8997_LDO8, &max8997_ldo8_data },
- { MAX8997_LDO9, &max8997_ldo9_data },
- { MAX8997_LDO10, &max8997_ldo10_data },
- { MAX8997_LDO11, &max8997_ldo11_data },
- { MAX8997_LDO14, &max8997_ldo14_data },
- { MAX8997_LDO17, &max8997_ldo17_data },
- { MAX8997_LDO21, &max8997_ldo21_data },
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
- { MAX8997_BUCK5, &max8997_buck5_data },
- { MAX8997_BUCK7, &max8997_buck7_data },
-};
-
-static struct max8997_platform_data __initdata origen_max8997_pdata = {
- .num_regulators = ARRAY_SIZE(origen_max8997_regulators),
- .regulators = origen_max8997_regulators,
-
- .wakeup = true,
- .buck1_gpiodvs = false,
- .buck2_gpiodvs = false,
- .buck5_gpiodvs = false,
-
- .ignore_gpiodvs_side_effect = true,
- .buck125_default_idx = 0x0,
-
- .buck125_gpios[0] = EXYNOS4_GPX0(0),
- .buck125_gpios[1] = EXYNOS4_GPX0(1),
- .buck125_gpios[2] = EXYNOS4_GPX0(2),
-
- .buck1_voltage[0] = 1350000,
- .buck1_voltage[1] = 1300000,
- .buck1_voltage[2] = 1250000,
- .buck1_voltage[3] = 1200000,
- .buck1_voltage[4] = 1150000,
- .buck1_voltage[5] = 1100000,
- .buck1_voltage[6] = 1000000,
- .buck1_voltage[7] = 950000,
-
- .buck2_voltage[0] = 1100000,
- .buck2_voltage[1] = 1100000,
- .buck2_voltage[2] = 1100000,
- .buck2_voltage[3] = 1100000,
- .buck2_voltage[4] = 1000000,
- .buck2_voltage[5] = 1000000,
- .buck2_voltage[6] = 1000000,
- .buck2_voltage[7] = 1000000,
-
- .buck5_voltage[0] = 1200000,
- .buck5_voltage[1] = 1200000,
- .buck5_voltage[2] = 1200000,
- .buck5_voltage[3] = 1200000,
- .buck5_voltage[4] = 1200000,
- .buck5_voltage[5] = 1200000,
- .buck5_voltage[6] = 1200000,
- .buck5_voltage[7] = 1200000,
-};
-
-/* I2C0 */
-static struct i2c_board_info i2c0_devs[] __initdata = {
- {
- I2C_BOARD_INFO("max8997", (0xCC >> 1)),
- .platform_data = &origen_max8997_pdata,
- .irq = IRQ_EINT(4),
- },
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-};
-
-static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata origen_ehci_pdata;
-
-static void __init origen_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &origen_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata origen_ohci_pdata;
-
-static void __init origen_ohci_init(void)
-{
- struct exynos4_ohci_platdata *pdata = &origen_ohci_pdata;
-
- exynos4_ohci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat origen_hsotg_pdata;
-
-static struct gpio_led origen_gpio_leds[] = {
- {
- .name = "origen::status1",
- .default_trigger = "heartbeat",
- .gpio = EXYNOS4_GPX1(3),
- .active_low = 1,
- },
- {
- .name = "origen::status2",
- .default_trigger = "mmc0",
- .gpio = EXYNOS4_GPX1(4),
- .active_low = 1,
- },
-};
-
-static struct gpio_led_platform_data origen_gpio_led_info = {
- .leds = origen_gpio_leds,
- .num_leds = ARRAY_SIZE(origen_gpio_leds),
-};
-
-static struct platform_device origen_leds_gpio = {
- .name = "leds-gpio",
- .id = -1,
- .dev = {
- .platform_data = &origen_gpio_led_info,
- },
-};
-
-static struct gpio_keys_button origen_gpio_keys_table[] = {
- {
- .code = KEY_MENU,
- .gpio = EXYNOS4_GPX1(5),
- .desc = "gpio-keys: KEY_MENU",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_HOME,
- .gpio = EXYNOS4_GPX1(6),
- .desc = "gpio-keys: KEY_HOME",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_BACK,
- .gpio = EXYNOS4_GPX1(7),
- .desc = "gpio-keys: KEY_BACK",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_UP,
- .gpio = EXYNOS4_GPX2(0),
- .desc = "gpio-keys: KEY_UP",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_DOWN,
- .gpio = EXYNOS4_GPX2(1),
- .desc = "gpio-keys: KEY_DOWN",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data origen_gpio_keys_data = {
- .buttons = origen_gpio_keys_table,
- .nbuttons = ARRAY_SIZE(origen_gpio_keys_table),
-};
-
-static struct platform_device origen_device_gpiokeys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &origen_gpio_keys_data,
- },
-};
-
-static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power)
-{
- int ret;
-
- if (power)
- ret = gpio_request_one(EXYNOS4_GPE3(4),
- GPIOF_OUT_INIT_HIGH, "GPE3_4");
- else
- ret = gpio_request_one(EXYNOS4_GPE3(4),
- GPIOF_OUT_INIT_LOW, "GPE3_4");
-
- gpio_free(EXYNOS4_GPE3(4));
-
- if (ret)
- pr_err("failed to request gpio for LCD power: %d\n", ret);
-}
-
-static struct plat_lcd_data origen_lcd_hv070wsa_data = {
- .set_power = lcd_hv070wsa_set_power,
-};
-
-static struct platform_device origen_lcd_hv070wsa = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &origen_lcd_hv070wsa_data,
-};
-
-static struct pwm_lookup origen_pwm_lookup[] = {
- PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL),
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 64,
- .right_margin = 16,
- .upper_margin = 64,
- .lower_margin = 16,
- .hsync_len = 48,
- .vsync_len = 3,
- .xres = 1024,
- .yres = 600,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VCLK,
- .default_win = 0,
- .bpp = 32,
-};
-#else
-static struct s3c_fb_pd_win origen_fb_win0 = {
- .xres = 1024,
- .yres = 600,
- .max_bpp = 32,
- .default_bpp = 24,
- .virtual_x = 1024,
- .virtual_y = 2 * 600,
-};
-
-static struct fb_videomode origen_lcd_timing = {
- .left_margin = 64,
- .right_margin = 16,
- .upper_margin = 64,
- .lower_margin = 16,
- .hsync_len = 48,
- .vsync_len = 3,
- .xres = 1024,
- .yres = 600,
-};
-
-static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
- .win[0] = &origen_fb_win0,
- .vtiming = &origen_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
- VIDCON1_INV_VCLK,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-/* Bluetooth rfkill gpio platform data */
-static struct rfkill_gpio_platform_data origen_bt_pdata = {
- .reset_gpio = EXYNOS4_GPX2(2),
- .shutdown_gpio = -1,
- .type = RFKILL_TYPE_BLUETOOTH,
- .name = "origen-bt",
-};
-
-/* Bluetooth Platform device */
-static struct platform_device origen_device_bluetooth = {
- .name = "rfkill_gpio",
- .id = -1,
- .dev = {
- .platform_data = &origen_bt_pdata,
- },
-};
-
-static struct platform_device *origen_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc0,
- &s3c_device_i2c0,
- &s3c_device_rtc,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_ehci,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimc_md,
- &s5p_device_fimd0,
- &s5p_device_g2d,
- &s5p_device_hdmi,
- &s5p_device_i2c_hdmiphy,
- &s5p_device_jpeg,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &s5p_device_mixer,
- &exynos4_device_ohci,
- &origen_device_gpiokeys,
- &origen_lcd_hv070wsa,
- &origen_leds_gpio,
- &origen_device_bluetooth,
-};
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info origen_bl_gpio_info = {
- .no = EXYNOS4_GPD0(0),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data origen_bl_data = {
- .pwm_id = 0,
- .pwm_period_ns = 1000,
-};
-
-static void __init origen_bt_setup(void)
-{
- gpio_request(EXYNOS4_GPA0(0), "GPIO BT_UART");
- /* 4 UART Pins configuration */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPA0(0), 4, S3C_GPIO_SFN(2));
- /* Setup BT Reset, this gpio will be requesed by rfkill-gpio */
- s3c_gpio_cfgpin(EXYNOS4_GPX2(2), S3C_GPIO_OUTPUT);
- s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE);
-}
-
-/* I2C module and id for HDMIPHY */
-static struct i2c_board_info hdmiphy_info = {
- I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
-};
-
-static void s5p_tv_setup(void)
-{
- /* Direct HPD to HDMI chip */
- gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
- s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
- s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs));
- xxti_f = 0;
- xusbxti_f = 24000000;
-}
-
-static void __init origen_power_init(void)
-{
- gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ");
- s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE);
-}
-
-static void __init origen_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init origen_machine_init(void)
-{
- origen_power_init();
-
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs));
-
- /*
- * Since sdhci instance 2 can contain a bootable media,
- * sdhci instance 0 is registered after instance 2.
- */
- s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata);
- s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata);
-
- origen_ehci_init();
- origen_ohci_init();
- s3c_hsotg_set_platdata(&origen_hsotg_pdata);
-
- s5p_tv_setup();
- s5p_i2c_hdmiphy_set_platdata(NULL);
- s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&origen_lcd_pdata);
-#endif
-
- platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices));
-
- pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup));
- samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data);
-
- origen_bt_setup();
-}
-
-MACHINE_START(ORIGEN, "ORIGEN")
- /* Maintainer: JeongHyeon Kim <jhkim@insignal.co.kr> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = origen_map_io,
- .init_machine = origen_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &origen_reserve,
- .restart = exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c
deleted file mode 100644
index 2c8af9617920..000000000000
--- a/arch/arm/mach-exynos/mach-smdk4x12.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/mach-smdk4x12.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/io.h>
-#include <linux/lcd.h>
-#include <linux/mfd/max8997.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/regulator/machine.h>
-#include <linux/serial_core.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/backlight.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/gpio-cfg.h>
-#include <plat/keypad.h>
-#include <plat/mfc.h>
-#include <plat/regs-serial.h>
-#include <plat/sdhci.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDK4X12_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDK4X12_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDK4X12_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdk4x12_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDK4X12_UCON_DEFAULT,
- .ulcon = SMDK4X12_ULCON_DEFAULT,
- .ufcon = SMDK4X12_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdk4x12_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-};
-
-static struct regulator_consumer_supply max8997_buck1 =
- REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_consumer_supply max8997_buck2 =
- REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply max8997_buck3 =
- REGULATOR_SUPPLY("vdd_g3d", NULL);
-
-static struct regulator_init_data max8997_buck1_data = {
- .constraints = {
- .name = "VDD_ARM_SMDK4X12",
- .min_uV = 925000,
- .max_uV = 1350000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck1,
-};
-
-static struct regulator_init_data max8997_buck2_data = {
- .constraints = {
- .name = "VDD_INT_SMDK4X12",
- .min_uV = 950000,
- .max_uV = 1150000,
- .always_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck2,
-};
-
-static struct regulator_init_data max8997_buck3_data = {
- .constraints = {
- .name = "VDD_G3D_SMDK4X12",
- .min_uV = 950000,
- .max_uV = 1150000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8997_buck3,
-};
-
-static struct max8997_regulator_data smdk4x12_max8997_regulators[] = {
- { MAX8997_BUCK1, &max8997_buck1_data },
- { MAX8997_BUCK2, &max8997_buck2_data },
- { MAX8997_BUCK3, &max8997_buck3_data },
-};
-
-static struct max8997_platform_data smdk4x12_max8997_pdata = {
- .num_regulators = ARRAY_SIZE(smdk4x12_max8997_regulators),
- .regulators = smdk4x12_max8997_regulators,
-
- .buck1_voltage[0] = 1100000, /* 1.1V */
- .buck1_voltage[1] = 1100000, /* 1.1V */
- .buck1_voltage[2] = 1100000, /* 1.1V */
- .buck1_voltage[3] = 1100000, /* 1.1V */
- .buck1_voltage[4] = 1100000, /* 1.1V */
- .buck1_voltage[5] = 1100000, /* 1.1V */
- .buck1_voltage[6] = 1000000, /* 1.0V */
- .buck1_voltage[7] = 950000, /* 0.95V */
-
- .buck2_voltage[0] = 1100000, /* 1.1V */
- .buck2_voltage[1] = 1000000, /* 1.0V */
- .buck2_voltage[2] = 950000, /* 0.95V */
- .buck2_voltage[3] = 900000, /* 0.9V */
- .buck2_voltage[4] = 1100000, /* 1.1V */
- .buck2_voltage[5] = 1000000, /* 1.0V */
- .buck2_voltage[6] = 950000, /* 0.95V */
- .buck2_voltage[7] = 900000, /* 0.9V */
-
- .buck5_voltage[0] = 1100000, /* 1.1V */
- .buck5_voltage[1] = 1100000, /* 1.1V */
- .buck5_voltage[2] = 1100000, /* 1.1V */
- .buck5_voltage[3] = 1100000, /* 1.1V */
- .buck5_voltage[4] = 1100000, /* 1.1V */
- .buck5_voltage[5] = 1100000, /* 1.1V */
- .buck5_voltage[6] = 1100000, /* 1.1V */
- .buck5_voltage[7] = 1100000, /* 1.1V */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs0[] __initdata = {
- {
- I2C_BOARD_INFO("max8997", 0x66),
- .platform_data = &smdk4x12_max8997_pdata,
- }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs1[] __initdata = {
- { I2C_BOARD_INFO("wm8994", 0x1a), }
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs3[] __initdata = {
- /* nothing here yet */
-};
-
-static struct i2c_board_info smdk4x12_i2c_devs7[] __initdata = {
- /* nothing here yet */
-};
-
-static struct samsung_bl_gpio_info smdk4x12_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdk4x12_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-static struct pwm_lookup smdk4x12_pwm_lookup[] = {
- PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
-};
-
-static uint32_t smdk4x12_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3),
- KEY(1, 6, KEY_4), KEY(1, 7, KEY_5),
- KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B),
- KEY(0, 7, KEY_E), KEY(0, 5, KEY_C)
-};
-
-static struct matrix_keymap_data smdk4x12_keymap_data __initdata = {
- .keymap = smdk4x12_keymap,
- .keymap_size = ARRAY_SIZE(smdk4x12_keymap),
-};
-
-static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = {
- .keymap_data = &smdk4x12_keymap_data,
- .rows = 3,
- .cols = 8,
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 8,
- .right_margin = 8,
- .upper_margin = 6,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 4,
- .xres = 480,
- .yres = 800,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 0,
- .bpp = 32,
-};
-#else
-static struct s3c_fb_pd_win smdk4x12_fb_win0 = {
- .xres = 480,
- .yres = 800,
- .virtual_x = 480,
- .virtual_y = 800 * 2,
- .max_bpp = 32,
- .default_bpp = 24,
-};
-
-static struct fb_videomode smdk4x12_lcd_timing = {
- .left_margin = 8,
- .right_margin = 8,
- .upper_margin = 6,
- .lower_margin = 6,
- .hsync_len = 6,
- .vsync_len = 4,
- .xres = 480,
- .yres = 800,
-};
-
-static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = {
- .win[0] = &smdk4x12_fb_win0,
- .vtiming = &smdk4x12_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdk4x12_hsotg_pdata;
-
-static struct platform_device *smdk4x12_devices[] __initdata = {
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c1,
- &s3c_device_i2c3,
- &s3c_device_i2c7,
- &s3c_device_rtc,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimc_md,
- &s5p_device_fimd0,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &samsung_device_keypad,
-};
-
-static void __init smdk4x12_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs));
-}
-
-static void __init smdk4x12_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdk4x12_machine_init(void)
-{
- s3c_i2c0_set_platdata(NULL);
- i2c_register_board_info(0, smdk4x12_i2c_devs0,
- ARRAY_SIZE(smdk4x12_i2c_devs0));
-
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, smdk4x12_i2c_devs1,
- ARRAY_SIZE(smdk4x12_i2c_devs1));
-
- s3c_i2c3_set_platdata(NULL);
- i2c_register_board_info(3, smdk4x12_i2c_devs3,
- ARRAY_SIZE(smdk4x12_i2c_devs3));
-
- s3c_i2c7_set_platdata(NULL);
- i2c_register_board_info(7, smdk4x12_i2c_devs7,
- ARRAY_SIZE(smdk4x12_i2c_devs7));
-
- samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data);
- pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup));
-
- samsung_keypad_set_platdata(&smdk4x12_keypad_data);
-
- s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata);
-
- s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata);
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata);
-#endif
-
- platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices));
-}
-
-MACHINE_START(SMDK4212, "SMDK4212")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdk4x12_map_io,
- .init_machine = smdk4x12_machine_init,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
- .reserve = &smdk4x12_reserve,
-MACHINE_END
-
-MACHINE_START(SMDK4412, "SMDK4412")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdk4x12_map_io,
- .init_machine = smdk4x12_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .restart = exynos4_restart,
- .reserve = &smdk4x12_reserve,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c
deleted file mode 100644
index d95b8cf85253..000000000000
--- a/arch/arm/mach-exynos/mach-smdkv310.c
+++ /dev/null
@@ -1,444 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-smdkv310.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/serial_core.h>
-#include <linux/delay.h>
-#include <linux/gpio.h>
-#include <linux/lcd.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_device.h>
-#include <linux/smsc911x.h>
-#include <linux/io.h>
-#include <linux/i2c.h>
-#include <linux/input.h>
-#include <linux/pwm.h>
-#include <linux/pwm_backlight.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <linux/platform_data/usb-ehci-s5p.h>
-#include <linux/platform_data/usb-ohci-exynos.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/platform_lcd.h>
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/regs-srom.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/fb.h>
-#include <plat/keypad.h>
-#include <plat/sdhci.h>
-#include <plat/gpio-cfg.h>
-#include <plat/backlight.h>
-#include <plat/mfc.h>
-#include <plat/clock.h>
-#include <plat/hdmi.h>
-
-#include <mach/irqs.h>
-#include <mach/map.h>
-
-#include <drm/exynos_drm.h>
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define SMDKV310_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define SMDKV310_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define SMDKV310_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG4 | \
- S5PV210_UFCON_RXTRIG4)
-
-static struct s3c2410_uartcfg smdkv310_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .flags = 0,
- .ucon = SMDKV310_UCON_DEFAULT,
- .ulcon = SMDKV310_ULCON_DEFAULT,
- .ufcon = SMDKV310_UFCON_DEFAULT,
- },
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc0_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH0_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc1_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK0(2),
- .ext_cd_gpio_invert = 1,
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc2_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_INTERNAL,
-#ifdef CONFIG_EXYNOS4_SDHCI_CH2_8BIT
- .max_width = 8,
- .host_caps = MMC_CAP_8_BIT_DATA,
-#endif
-};
-
-static struct s3c_sdhci_platdata smdkv310_hsmmc3_pdata __initdata = {
- .cd_type = S3C_SDHCI_CD_GPIO,
- .ext_cd_gpio = EXYNOS4_GPK2(2),
- .ext_cd_gpio_invert = 1,
-};
-
-static void lcd_lte480wv_set_power(struct plat_lcd_data *pd,
- unsigned int power)
-{
- if (power) {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_HIGH, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- /* fire nRESET on power up */
- gpio_request_one(EXYNOS4_GPX0(6), GPIOF_OUT_INIT_HIGH, "GPX0");
- mdelay(100);
-
- gpio_set_value(EXYNOS4_GPX0(6), 0);
- mdelay(10);
-
- gpio_set_value(EXYNOS4_GPX0(6), 1);
- mdelay(10);
-
- gpio_free(EXYNOS4_GPX0(6));
- } else {
-#if !defined(CONFIG_BACKLIGHT_PWM)
- gpio_request_one(EXYNOS4_GPD0(1), GPIOF_OUT_INIT_LOW, "GPD0");
- gpio_free(EXYNOS4_GPD0(1));
-#endif
- }
-}
-
-static struct plat_lcd_data smdkv310_lcd_lte480wv_data = {
- .set_power = lcd_lte480wv_set_power,
-};
-
-static struct platform_device smdkv310_lcd_lte480wv = {
- .name = "platform-lcd",
- .dev.parent = &s5p_device_fimd0.dev,
- .dev.platform_data = &smdkv310_lcd_lte480wv_data,
-};
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 0,
- .bpp = 32,
-};
-#else
-static struct s3c_fb_pd_win smdkv310_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 24,
- .xres = 800,
- .yres = 480,
-};
-
-static struct fb_videomode smdkv310_lcd_timing = {
- .left_margin = 13,
- .right_margin = 8,
- .upper_margin = 7,
- .lower_margin = 5,
- .hsync_len = 3,
- .vsync_len = 1,
- .xres = 800,
- .yres = 480,
-};
-
-static struct s3c_fb_platdata smdkv310_lcd0_pdata __initdata = {
- .win[0] = &smdkv310_fb_win0,
- .vtiming = &smdkv310_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct resource smdkv310_smsc911x_resources[] = {
- [0] = DEFINE_RES_MEM(EXYNOS4_PA_SROM_BANK(1), SZ_64K),
- [1] = DEFINE_RES_NAMED(IRQ_EINT(5), 1, NULL, IORESOURCE_IRQ \
- | IRQF_TRIGGER_LOW),
-};
-
-static struct smsc911x_platform_config smsc9215_config = {
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .flags = SMSC911X_USE_16BIT | SMSC911X_FORCE_INTERNAL_PHY,
- .phy_interface = PHY_INTERFACE_MODE_MII,
- .mac = {0x00, 0x80, 0x00, 0x23, 0x45, 0x67},
-};
-
-static struct platform_device smdkv310_smsc911x = {
- .name = "smsc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smdkv310_smsc911x_resources),
- .resource = smdkv310_smsc911x_resources,
- .dev = {
- .platform_data = &smsc9215_config,
- },
-};
-
-static uint32_t smdkv310_keymap[] __initdata = {
- /* KEY(row, col, keycode) */
- KEY(0, 3, KEY_1), KEY(0, 4, KEY_2), KEY(0, 5, KEY_3),
- KEY(0, 6, KEY_4), KEY(0, 7, KEY_5),
- KEY(1, 3, KEY_A), KEY(1, 4, KEY_B), KEY(1, 5, KEY_C),
- KEY(1, 6, KEY_D), KEY(1, 7, KEY_E)
-};
-
-static struct matrix_keymap_data smdkv310_keymap_data __initdata = {
- .keymap = smdkv310_keymap,
- .keymap_size = ARRAY_SIZE(smdkv310_keymap),
-};
-
-static struct samsung_keypad_platdata smdkv310_keypad_data __initdata = {
- .keymap_data = &smdkv310_keymap_data,
- .rows = 2,
- .cols = 8,
-};
-
-static struct i2c_board_info i2c_devs1[] __initdata = {
- {I2C_BOARD_INFO("wm8994", 0x1a),},
-};
-
-/* USB EHCI */
-static struct s5p_ehci_platdata smdkv310_ehci_pdata;
-
-static void __init smdkv310_ehci_init(void)
-{
- struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata;
-
- s5p_ehci_set_platdata(pdata);
-}
-
-/* USB OHCI */
-static struct exynos4_ohci_platdata smdkv310_ohci_pdata;
-
-static void __init smdkv310_ohci_init(void)
-{
- struct exynos4_ohci_platdata *pdata = &smdkv310_ohci_pdata;
-
- exynos4_ohci_set_platdata(pdata);
-}
-
-/* USB OTG */
-static struct s3c_hsotg_plat smdkv310_hsotg_pdata;
-
-/* Audio device */
-static struct platform_device smdkv310_device_audio = {
- .name = "smdk-audio",
- .id = -1,
-};
-
-static struct platform_device *smdkv310_devices[] __initdata = {
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc1,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c1,
- &s5p_device_i2c_hdmiphy,
- &s3c_device_rtc,
- &s3c_device_usb_hsotg,
- &s3c_device_wdt,
- &s5p_device_ehci,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_fimc_md,
- &s5p_device_g2d,
- &s5p_device_jpeg,
- &exynos4_device_ac97,
- &exynos4_device_i2s0,
- &exynos4_device_ohci,
- &samsung_device_keypad,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &exynos4_device_spdif,
- &samsung_asoc_idma,
- &s5p_device_fimd0,
- &smdkv310_device_audio,
- &smdkv310_lcd_lte480wv,
- &smdkv310_smsc911x,
- &exynos4_device_ahci,
- &s5p_device_hdmi,
- &s5p_device_mixer,
-};
-
-static void __init smdkv310_smsc911x_init(void)
-{
- u32 cs1;
-
- /* configure nCS1 width to 16 bits */
- cs1 = __raw_readl(S5P_SROM_BW) &
- ~(S5P_SROM_BW__CS_MASK << S5P_SROM_BW__NCS1__SHIFT);
- cs1 |= ((1 << S5P_SROM_BW__DATAWIDTH__SHIFT) |
- (1 << S5P_SROM_BW__WAITENABLE__SHIFT) |
- (1 << S5P_SROM_BW__BYTEENABLE__SHIFT)) <<
- S5P_SROM_BW__NCS1__SHIFT;
- __raw_writel(cs1, S5P_SROM_BW);
-
- /* set timing for nCS1 suitable for ethernet chip */
- __raw_writel((0x1 << S5P_SROM_BCX__PMC__SHIFT) |
- (0x9 << S5P_SROM_BCX__TACP__SHIFT) |
- (0xc << S5P_SROM_BCX__TCAH__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOH__SHIFT) |
- (0x6 << S5P_SROM_BCX__TACC__SHIFT) |
- (0x1 << S5P_SROM_BCX__TCOS__SHIFT) |
- (0x1 << S5P_SROM_BCX__TACS__SHIFT), S5P_SROM_BC1);
-}
-
-/* LCD Backlight data */
-static struct samsung_bl_gpio_info smdkv310_bl_gpio_info = {
- .no = EXYNOS4_GPD0(1),
- .func = S3C_GPIO_SFN(2),
-};
-
-static struct platform_pwm_backlight_data smdkv310_bl_data = {
- .pwm_id = 1,
- .pwm_period_ns = 1000,
-};
-
-/* I2C module and id for HDMIPHY */
-static struct i2c_board_info hdmiphy_info = {
- I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38),
-};
-
-static struct pwm_lookup smdkv310_pwm_lookup[] = {
- PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL),
-};
-
-static void s5p_tv_setup(void)
-{
- /* direct HPD to HDMI chip */
- WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"));
- s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
- s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init smdkv310_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs));
- xxti_f = 12000000;
- xusbxti_f = 24000000;
-}
-
-static void __init smdkv310_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init smdkv310_machine_init(void)
-{
- s3c_i2c1_set_platdata(NULL);
- i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1));
-
- smdkv310_smsc911x_init();
-
- s3c_sdhci0_set_platdata(&smdkv310_hsmmc0_pdata);
- s3c_sdhci1_set_platdata(&smdkv310_hsmmc1_pdata);
- s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata);
- s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata);
-
- s5p_tv_setup();
- s5p_i2c_hdmiphy_set_platdata(NULL);
- s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0);
-
- samsung_keypad_set_platdata(&smdkv310_keypad_data);
-
- samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data);
- pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup));
-
-#ifdef CONFIG_DRM_EXYNOS_FIMD
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata);
-#endif
-
- smdkv310_ehci_init();
- smdkv310_ohci_init();
- s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata);
-
- platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices));
-}
-
-MACHINE_START(SMDKV310, "SMDKV310")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- /* Maintainer: Changhwan Youn <chaos.youn@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdkv310_map_io,
- .init_machine = smdkv310_machine_init,
- .init_time = exynos_init_time,
- .reserve = &smdkv310_reserve,
- .restart = exynos4_restart,
-MACHINE_END
-
-MACHINE_START(SMDKC210, "SMDKC210")
- /* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = smdkv310_map_io,
- .init_machine = smdkv310_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &smdkv310_reserve,
- .restart = exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
deleted file mode 100644
index 74ddb2b55614..000000000000
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ /dev/null
@@ -1,1159 +0,0 @@
-/* linux/arch/arm/mach-exynos4/mach-universal_c210.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/input.h>
-#include <linux/i2c.h>
-#include <linux/gpio_keys.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/fb.h>
-#include <linux/mfd/max8998.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/max8952.h>
-#include <linux/mmc/host.h>
-#include <linux/i2c-gpio.h>
-#include <linux/i2c/mcs.h>
-#include <linux/i2c/atmel_mxt_ts.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <linux/platform_data/mipi-csis.h>
-#include <linux/platform_data/s3c-hsotg.h>
-#include <drm/exynos_drm.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach-types.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/regs-serial.h>
-#include <plat/clock.h>
-#include <plat/cpu.h>
-#include <plat/devs.h>
-#include <plat/gpio-cfg.h>
-#include <plat/fb.h>
-#include <plat/mfc.h>
-#include <plat/sdhci.h>
-#include <plat/fimc-core.h>
-#include <plat/camport.h>
-
-#include <mach/map.h>
-
-#include <media/v4l2-mediabus.h>
-#include <media/s5p_fimc.h>
-#include <media/m5mols.h>
-#include <media/s5k6aa.h>
-
-#include "common.h"
-
-/* Following are default values for UCON, ULCON and UFCON UART registers */
-#define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
- S3C2410_UCON_RXILEVEL | \
- S3C2410_UCON_TXIRQMODE | \
- S3C2410_UCON_RXIRQMODE | \
- S3C2410_UCON_RXFIFO_TOI | \
- S3C2443_UCON_RXERR_IRQEN)
-
-#define UNIVERSAL_ULCON_DEFAULT S3C2410_LCON_CS8
-
-#define UNIVERSAL_UFCON_DEFAULT (S3C2410_UFCON_FIFOMODE | \
- S5PV210_UFCON_TXTRIG256 | \
- S5PV210_UFCON_RXTRIG256)
-
-static struct s3c2410_uartcfg universal_uartcfgs[] __initdata = {
- [0] = {
- .hwport = 0,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [1] = {
- .hwport = 1,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [2] = {
- .hwport = 2,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
- [3] = {
- .hwport = 3,
- .ucon = UNIVERSAL_UCON_DEFAULT,
- .ulcon = UNIVERSAL_ULCON_DEFAULT,
- .ufcon = UNIVERSAL_UFCON_DEFAULT,
- },
-};
-
-static struct regulator_consumer_supply max8952_consumer =
- REGULATOR_SUPPLY("vdd_arm", NULL);
-
-static struct regulator_init_data universal_max8952_reg_data = {
- .constraints = {
- .name = "VARM_1.2V",
- .min_uV = 770000,
- .max_uV = 1400000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
- .always_on = 1,
- .boot_on = 1,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &max8952_consumer,
-};
-
-static struct max8952_platform_data universal_max8952_pdata __initdata = {
- .gpio_vid0 = EXYNOS4_GPX0(3),
- .gpio_vid1 = EXYNOS4_GPX0(4),
- .gpio_en = -1, /* Not controllable, set "Always High" */
- .default_mode = 0, /* vid0 = 0, vid1 = 0 */
- .dvs_mode = { 48, 32, 28, 18 }, /* 1.25, 1.20, 1.05, 0.95V */
- .sync_freq = 0, /* default: fastest */
- .ramp_speed = 0, /* default: fastest */
- .reg_data = &universal_max8952_reg_data,
-};
-
-static struct regulator_consumer_supply lp3974_buck1_consumer =
- REGULATOR_SUPPLY("vdd_int", NULL);
-
-static struct regulator_consumer_supply lp3974_buck2_consumer =
- REGULATOR_SUPPLY("vddg3d", NULL);
-
-static struct regulator_consumer_supply lp3974_buck3_consumer[] = {
- REGULATOR_SUPPLY("vdet", "s5p-sdo"),
- REGULATOR_SUPPLY("vdd_reg", "0-003c"),
-};
-
-static struct regulator_init_data lp3974_buck1_data = {
- .constraints = {
- .name = "VINT_1.1V",
- .min_uV = 750000,
- .max_uV = 1500000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck1_consumer,
-};
-
-static struct regulator_init_data lp3974_buck2_data = {
- .constraints = {
- .name = "VG3D_1.1V",
- .min_uV = 750000,
- .max_uV = 1500000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_buck2_consumer,
-};
-
-static struct regulator_init_data lp3974_buck3_data = {
- .constraints = {
- .name = "VCC_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_buck3_consumer),
- .consumer_supplies = lp3974_buck3_consumer,
-};
-
-static struct regulator_init_data lp3974_buck4_data = {
- .constraints = {
- .name = "VMEM_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .apply_uV = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo2_data = {
- .constraints = {
- .name = "VALIVE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo3_consumer[] = {
- REGULATOR_SUPPLY("vusb_a", "s3c-hsotg"),
- REGULATOR_SUPPLY("vdd", "exynos4-hdmi"),
- REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"),
- REGULATOR_SUPPLY("vddcore", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo3_data = {
- .constraints = {
- .name = "VUSB+MIPI_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer),
- .consumer_supplies = lp3974_ldo3_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo4_consumer[] = {
- REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"),
-};
-
-static struct regulator_init_data lp3974_ldo4_data = {
- .constraints = {
- .name = "VADC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer),
- .consumer_supplies = lp3974_ldo4_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo5_data = {
- .constraints = {
- .name = "VTF_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo6_data = {
- .constraints = {
- .name = "LDO6",
- .min_uV = 2000000,
- .max_uV = 2000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo7_consumer[] = {
- REGULATOR_SUPPLY("vddio", "s5p-mipi-csis.0"),
-};
-
-static struct regulator_init_data lp3974_ldo7_data = {
- .constraints = {
- .name = "VLCD+VMIPI_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer),
- .consumer_supplies = lp3974_ldo7_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo8_consumer[] = {
- REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"),
- REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"),
-};
-
-static struct regulator_init_data lp3974_ldo8_data = {
- .constraints = {
- .name = "VUSB+VDAC_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer),
- .consumer_supplies = lp3974_ldo8_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo9_consumer =
- REGULATOR_SUPPLY("vddio", "0-003c");
-
-static struct regulator_init_data lp3974_ldo9_data = {
- .constraints = {
- .name = "VCC_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo9_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo10_data = {
- .constraints = {
- .name = "VPLL_1.1V",
- .min_uV = 1100000,
- .max_uV = 1100000,
- .boot_on = 1,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo11_consumer =
- REGULATOR_SUPPLY("dig_28", "0-001f");
-
-static struct regulator_init_data lp3974_ldo11_data = {
- .constraints = {
- .name = "CAM_AF_3.3V",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo11_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo12_data = {
- .constraints = {
- .name = "PS_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_ldo13_data = {
- .constraints = {
- .name = "VHIC_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_consumer_supply lp3974_ldo14_consumer =
- REGULATOR_SUPPLY("dig_18", "0-001f");
-
-static struct regulator_init_data lp3974_ldo14_data = {
- .constraints = {
- .name = "CAM_I_HOST_1.8V",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo14_consumer,
-};
-
-
-static struct regulator_consumer_supply lp3974_ldo15_consumer =
- REGULATOR_SUPPLY("dig_12", "0-001f");
-
-static struct regulator_init_data lp3974_ldo15_data = {
- .constraints = {
- .name = "CAM_S_DIG+FM33_CORE_1.2V",
- .min_uV = 1200000,
- .max_uV = 1200000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &lp3974_ldo15_consumer,
-};
-
-static struct regulator_consumer_supply lp3974_ldo16_consumer[] = {
- REGULATOR_SUPPLY("vdda", "0-003c"),
- REGULATOR_SUPPLY("a_sensor", "0-001f"),
-};
-
-static struct regulator_init_data lp3974_ldo16_data = {
- .constraints = {
- .name = "CAM_S_ANA_2.8V",
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .disabled = 1,
- },
- },
- .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer),
- .consumer_supplies = lp3974_ldo16_consumer,
-};
-
-static struct regulator_init_data lp3974_ldo17_data = {
- .constraints = {
- .name = "VCC_3.0V_LCD",
- .min_uV = 3000000,
- .max_uV = 3000000,
- .apply_uV = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .boot_on = 1,
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_32khz_ap_data = {
- .constraints = {
- .name = "32KHz AP",
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_32khz_cp_data = {
- .constraints = {
- .name = "32KHz CP",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_vichg_data = {
- .constraints = {
- .name = "VICHG",
- .state_mem = {
- .disabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_esafeout1_data = {
- .constraints = {
- .name = "SAFEOUT1",
- .min_uV = 4800000,
- .max_uV = 4800000,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .always_on = 1,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct regulator_init_data lp3974_esafeout2_data = {
- .constraints = {
- .name = "SAFEOUT2",
- .boot_on = 1,
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- .state_mem = {
- .enabled = 1,
- },
- },
-};
-
-static struct max8998_regulator_data lp3974_regulators[] = {
- { MAX8998_LDO2, &lp3974_ldo2_data },
- { MAX8998_LDO3, &lp3974_ldo3_data },
- { MAX8998_LDO4, &lp3974_ldo4_data },
- { MAX8998_LDO5, &lp3974_ldo5_data },
- { MAX8998_LDO6, &lp3974_ldo6_data },
- { MAX8998_LDO7, &lp3974_ldo7_data },
- { MAX8998_LDO8, &lp3974_ldo8_data },
- { MAX8998_LDO9, &lp3974_ldo9_data },
- { MAX8998_LDO10, &lp3974_ldo10_data },
- { MAX8998_LDO11, &lp3974_ldo11_data },
- { MAX8998_LDO12, &lp3974_ldo12_data },
- { MAX8998_LDO13, &lp3974_ldo13_data },
- { MAX8998_LDO14, &lp3974_ldo14_data },
- { MAX8998_LDO15, &lp3974_ldo15_data },
- { MAX8998_LDO16, &lp3974_ldo16_data },
- { MAX8998_LDO17, &lp3974_ldo17_data },
- { MAX8998_BUCK1, &lp3974_buck1_data },
- { MAX8998_BUCK2, &lp3974_buck2_data },
- { MAX8998_BUCK3, &lp3974_buck3_data },
- { MAX8998_BUCK4, &lp3974_buck4_data },
- { MAX8998_EN32KHZ_AP, &lp3974_32khz_ap_data },
- { MAX8998_EN32KHZ_CP, &lp3974_32khz_cp_data },
- { MAX8998_ENVICHG, &lp3974_vichg_data },
- { MAX8998_ESAFEOUT1, &lp3974_esafeout1_data },
- { MAX8998_ESAFEOUT2, &lp3974_esafeout2_data },
-};
-
-static struct max8998_platform_data universal_lp3974_pdata = {
- .num_regulators = ARRAY_SIZE(lp3974_regulators),
- .regulators = lp3974_regulators,
- .buck1_voltage1 = 1100000, /* INT */
- .buck1_voltage2 = 1000000,
- .buck1_voltage3 = 1100000,
- .buck1_voltage4 = 1000000,
- .buck1_set1 = EXYNOS4_GPX0(5),
- .buck1_set2 = EXYNOS4_GPX0(6),
- .buck2_voltage1 = 1200000, /* G3D */
- .buck2_voltage2 = 1100000,
- .buck1_default_idx = 0,
- .buck2_set3 = EXYNOS4_GPE2(0),
- .buck2_default_idx = 0,
- .wakeup = true,
-};
-
-
-enum fixed_regulator_id {
- FIXED_REG_ID_MMC0,
- FIXED_REG_ID_HDMI_5V,
- FIXED_REG_ID_CAM_S_IF,
- FIXED_REG_ID_CAM_I_CORE,
- FIXED_REG_ID_CAM_VT_DIO,
-};
-
-static struct regulator_consumer_supply hdmi_fixed_consumer =
- REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi");
-
-static struct regulator_init_data hdmi_fixed_voltage_init_data = {
- .constraints = {
- .name = "HDMI_5V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = 1,
- .consumer_supplies = &hdmi_fixed_consumer,
-};
-
-static struct fixed_voltage_config hdmi_fixed_voltage_config = {
- .supply_name = "HDMI_EN1",
- .microvolts = 5000000,
- .gpio = EXYNOS4_GPE0(1),
- .enable_high = true,
- .init_data = &hdmi_fixed_voltage_init_data,
-};
-
-static struct platform_device hdmi_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_HDMI_5V,
- .dev = {
- .platform_data = &hdmi_fixed_voltage_config,
- },
-};
-
-/* GPIO I2C 5 (PMIC) */
-static struct i2c_board_info i2c5_devs[] __initdata = {
- {
- I2C_BOARD_INFO("max8952", 0xC0 >> 1),
- .platform_data = &universal_max8952_pdata,
- }, {
- I2C_BOARD_INFO("lp3974", 0xCC >> 1),
- .platform_data = &universal_lp3974_pdata,
- },
-};
-
-/* I2C3 (TSP) */
-static struct mxt_platform_data qt602240_platform_data = {
- .x_line = 19,
- .y_line = 11,
- .x_size = 800,
- .y_size = 480,
- .blen = 0x11,
- .threshold = 0x28,
- .voltage = 2800000, /* 2.8V */
- .orient = MXT_DIAGONAL,
- .irqflags = IRQF_TRIGGER_FALLING,
-};
-
-static struct i2c_board_info i2c3_devs[] __initdata = {
- {
- I2C_BOARD_INFO("qt602240_ts", 0x4a),
- .platform_data = &qt602240_platform_data,
- },
-};
-
-static void __init universal_tsp_init(void)
-{
- int gpio;
-
- /* TSP_LDO_ON: XMDMADDR_11 */
- gpio = EXYNOS4_GPE2(3);
- gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "TSP_LDO_ON");
- gpio_export(gpio, 0);
-
- /* TSP_INT: XMDMADDR_7 */
- gpio = EXYNOS4_GPE1(7);
- gpio_request(gpio, "TSP_INT");
-
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- i2c3_devs[0].irq = gpio_to_irq(gpio);
-}
-
-
-/* GPIO I2C 12 (3 Touchkey) */
-static uint32_t touchkey_keymap[] = {
- /* MCS_KEY_MAP(value, keycode) */
- MCS_KEY_MAP(0, KEY_MENU), /* KEY_SEND */
- MCS_KEY_MAP(1, KEY_BACK), /* KEY_END */
-};
-
-static struct mcs_platform_data touchkey_data = {
- .keymap = touchkey_keymap,
- .keymap_size = ARRAY_SIZE(touchkey_keymap),
- .key_maxval = 2,
-};
-
-/* GPIO I2C 3_TOUCH 2.8V */
-#define I2C_GPIO_BUS_12 12
-static struct i2c_gpio_platform_data i2c_gpio12_data = {
- .sda_pin = EXYNOS4_GPE4(0), /* XMDMDATA_8 */
- .scl_pin = EXYNOS4_GPE4(1), /* XMDMDATA_9 */
-};
-
-static struct platform_device i2c_gpio12 = {
- .name = "i2c-gpio",
- .id = I2C_GPIO_BUS_12,
- .dev = {
- .platform_data = &i2c_gpio12_data,
- },
-};
-
-static struct i2c_board_info i2c_gpio12_devs[] __initdata = {
- {
- I2C_BOARD_INFO("mcs5080_touchkey", 0x20),
- .platform_data = &touchkey_data,
- },
-};
-
-static void __init universal_touchkey_init(void)
-{
- int gpio;
-
- gpio = EXYNOS4_GPE3(7); /* XMDMDATA_7 */
- gpio_request(gpio, "3_TOUCH_INT");
- s5p_register_gpio_interrupt(gpio);
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(0xf));
- i2c_gpio12_devs[0].irq = gpio_to_irq(gpio);
-
- gpio = EXYNOS4_GPE3(3); /* XMDMDATA_3 */
- gpio_request_one(gpio, GPIOF_OUT_INIT_HIGH, "3_TOUCH_EN");
-}
-
-static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = {
- .frequency = 300 * 1000,
- .sda_delay = 200,
-};
-
-/* GPIO KEYS */
-static struct gpio_keys_button universal_gpio_keys_tables[] = {
- {
- .code = KEY_VOLUMEUP,
- .gpio = EXYNOS4_GPX2(0), /* XEINT16 */
- .desc = "gpio-keys: KEY_VOLUMEUP",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_VOLUMEDOWN,
- .gpio = EXYNOS4_GPX2(1), /* XEINT17 */
- .desc = "gpio-keys: KEY_VOLUMEDOWN",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_CONFIG,
- .gpio = EXYNOS4_GPX2(2), /* XEINT18 */
- .desc = "gpio-keys: KEY_CONFIG",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_CAMERA,
- .gpio = EXYNOS4_GPX2(3), /* XEINT19 */
- .desc = "gpio-keys: KEY_CAMERA",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- }, {
- .code = KEY_OK,
- .gpio = EXYNOS4_GPX3(5), /* XEINT29 */
- .desc = "gpio-keys: KEY_OK",
- .type = EV_KEY,
- .active_low = 1,
- .debounce_interval = 1,
- },
-};
-
-static struct gpio_keys_platform_data universal_gpio_keys_data = {
- .buttons = universal_gpio_keys_tables,
- .nbuttons = ARRAY_SIZE(universal_gpio_keys_tables),
-};
-
-static struct platform_device universal_gpio_keys = {
- .name = "gpio-keys",
- .dev = {
- .platform_data = &universal_gpio_keys_data,
- },
-};
-
-/* eMMC */
-static struct s3c_sdhci_platdata universal_hsmmc0_data __initdata = {
- .max_width = 8,
- .host_caps = (MMC_CAP_8_BIT_DATA | MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED),
- .cd_type = S3C_SDHCI_CD_PERMANENT,
-};
-
-static struct regulator_consumer_supply mmc0_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "exynos4-sdhci.0"),
-};
-
-static struct regulator_init_data mmc0_fixed_voltage_init_data = {
- .constraints = {
- .name = "VMEM_VDD_2.8V",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(mmc0_supplies),
- .consumer_supplies = mmc0_supplies,
-};
-
-static struct fixed_voltage_config mmc0_fixed_voltage_config = {
- .supply_name = "MASSMEMORY_EN",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE1(3),
- .enable_high = true,
- .init_data = &mmc0_fixed_voltage_init_data,
-};
-
-static struct platform_device mmc0_fixed_voltage = {
- .name = "reg-fixed-voltage",
- .id = FIXED_REG_ID_MMC0,
- .dev = {
- .platform_data = &mmc0_fixed_voltage_config,
- },
-};
-
-/* SD */
-static struct s3c_sdhci_platdata universal_hsmmc2_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .ext_cd_gpio = EXYNOS4_GPX3(4), /* XEINT_28 */
- .ext_cd_gpio_invert = 1,
- .cd_type = S3C_SDHCI_CD_GPIO,
-};
-
-/* WiFi */
-static struct s3c_sdhci_platdata universal_hsmmc3_data __initdata = {
- .max_width = 4,
- .host_caps = MMC_CAP_4_BIT_DATA |
- MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED,
- .cd_type = S3C_SDHCI_CD_EXTERNAL,
-};
-
-static void __init universal_sdhci_init(void)
-{
- s3c_sdhci0_set_platdata(&universal_hsmmc0_data);
- s3c_sdhci2_set_platdata(&universal_hsmmc2_data);
- s3c_sdhci3_set_platdata(&universal_hsmmc3_data);
-}
-
-/* I2C1 */
-static struct i2c_board_info i2c1_devs[] __initdata = {
- /* Gyro, To be updated */
-};
-
-#ifdef CONFIG_DRM_EXYNOS
-static struct exynos_drm_fimd_pdata drm_fimd_pdata = {
- .panel = {
- .timing = {
- .left_margin = 16,
- .right_margin = 16,
- .upper_margin = 2,
- .lower_margin = 28,
- .hsync_len = 2,
- .vsync_len = 1,
- .xres = 480,
- .yres = 800,
- .refresh = 55,
- },
- },
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
- | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .default_win = 3,
- .bpp = 32,
-};
-#else
-/* Frame Buffer */
-static struct s3c_fb_pd_win universal_fb_win0 = {
- .max_bpp = 32,
- .default_bpp = 16,
- .xres = 480,
- .yres = 800,
- .virtual_x = 480,
- .virtual_y = 2 * 800,
-};
-
-static struct fb_videomode universal_lcd_timing = {
- .left_margin = 16,
- .right_margin = 16,
- .upper_margin = 2,
- .lower_margin = 28,
- .hsync_len = 2,
- .vsync_len = 1,
- .xres = 480,
- .yres = 800,
- .refresh = 55,
-};
-
-static struct s3c_fb_platdata universal_lcd_pdata __initdata = {
- .win[0] = &universal_fb_win0,
- .vtiming = &universal_lcd_timing,
- .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB |
- VIDCON0_CLKSEL_LCD,
- .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN
- | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
- .setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
-};
-#endif
-
-static struct regulator_consumer_supply cam_vt_dio_supply =
- REGULATOR_SUPPLY("vdd_core", "0-003c");
-
-static struct regulator_init_data cam_vt_dio_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_vt_dio_supply,
-};
-
-static struct fixed_voltage_config cam_vt_dio_fixed_voltage_cfg = {
- .supply_name = "CAM_VT_D_IO",
- .microvolts = 2800000,
- .gpio = EXYNOS4_GPE2(1), /* CAM_PWR_EN2 */
- .enable_high = 1,
- .init_data = &cam_vt_dio_reg_init_data,
-};
-
-static struct platform_device cam_vt_dio_fixed_reg_dev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_VT_DIO,
- .dev = { .platform_data = &cam_vt_dio_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_i_core_supply =
- REGULATOR_SUPPLY("core", "0-001f");
-
-static struct regulator_init_data cam_i_core_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_i_core_supply,
-};
-
-static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = {
- .supply_name = "CAM_I_CORE_1.2V",
- .microvolts = 1200000,
- .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */
- .enable_high = 1,
- .init_data = &cam_i_core_reg_init_data,
-};
-
-static struct platform_device cam_i_core_fixed_reg_dev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE,
- .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg },
-};
-
-static struct regulator_consumer_supply cam_s_if_supply =
- REGULATOR_SUPPLY("d_sensor", "0-001f");
-
-static struct regulator_init_data cam_s_if_reg_init_data = {
- .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS },
- .num_consumer_supplies = 1,
- .consumer_supplies = &cam_s_if_supply,
-};
-
-static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = {
- .supply_name = "CAM_S_IF_1.8V",
- .microvolts = 1800000,
- .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */
- .enable_high = 1,
- .init_data = &cam_s_if_reg_init_data,
-};
-
-static struct platform_device cam_s_if_fixed_reg_dev = {
- .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF,
- .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg },
-};
-
-static struct s5p_platform_mipi_csis mipi_csis_platdata = {
- .clk_rate = 166000000UL,
- .lanes = 2,
- .hs_settle = 12,
-};
-
-#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3)
-#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */
-#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5)
-#define GPIO_CAM_VGA_NRST EXYNOS4_GPE4(7)
-#define GPIO_CAM_VGA_NSTBY EXYNOS4_GPE4(6)
-
-static int s5k6aa_set_power(int on)
-{
- gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
- return 0;
-}
-
-static struct s5k6aa_platform_data s5k6aa_platdata = {
- .mclk_frequency = 21600000UL,
- .gpio_reset = { GPIO_CAM_VGA_NRST, 0 },
- .gpio_stby = { GPIO_CAM_VGA_NSTBY, 0 },
- .bus_type = V4L2_MBUS_PARALLEL,
- .horiz_flip = 1,
- .set_power = s5k6aa_set_power,
-};
-
-static struct i2c_board_info s5k6aa_board_info = {
- I2C_BOARD_INFO("S5K6AA", 0x3C),
- .platform_data = &s5k6aa_platdata,
-};
-
-static int m5mols_set_power(struct device *dev, int on)
-{
- gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on);
- gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on);
- return 0;
-}
-
-static struct m5mols_platform_data m5mols_platdata = {
- .gpio_reset = GPIO_CAM_MEGA_nRST,
- .reset_polarity = 0,
- .set_power = m5mols_set_power,
-};
-
-static struct i2c_board_info m5mols_board_info = {
- I2C_BOARD_INFO("M5MOLS", 0x1F),
- .platform_data = &m5mols_platdata,
-};
-
-static struct fimc_source_info universal_camera_sensors[] = {
- {
- .mux_id = 0,
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_ITU_601,
- .board_info = &s5k6aa_board_info,
- .i2c_bus_num = 0,
- .clk_frequency = 24000000UL,
- }, {
- .mux_id = 0,
- .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING |
- V4L2_MBUS_VSYNC_ACTIVE_LOW,
- .fimc_bus_type = FIMC_BUS_TYPE_MIPI_CSI2,
- .board_info = &m5mols_board_info,
- .i2c_bus_num = 0,
- .clk_frequency = 24000000UL,
- },
-};
-
-static struct s5p_platform_fimc fimc_md_platdata = {
- .source_info = universal_camera_sensors,
- .num_clients = ARRAY_SIZE(universal_camera_sensors),
-};
-
-static struct gpio universal_camera_gpios[] = {
- { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" },
- { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" },
- { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" },
- { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" },
- { GPIO_CAM_VGA_NRST, GPIOF_OUT_INIT_LOW, "CAM_VGA_NRST" },
- { GPIO_CAM_VGA_NSTBY, GPIOF_OUT_INIT_LOW, "CAM_VGA_NSTBY" },
-};
-
-/* USB OTG */
-static struct s3c_hsotg_plat universal_hsotg_pdata;
-
-static void __init universal_camera_init(void)
-{
- s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata),
- &s5p_device_mipi_csis0);
- s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata),
- &s5p_device_fimc_md);
-
- if (gpio_request_array(universal_camera_gpios,
- ARRAY_SIZE(universal_camera_gpios))) {
- pr_err("%s: GPIO request failed\n", __func__);
- return;
- }
-
- if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf)))
- m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT);
- else
- pr_err("Failed to configure 8M_ISP_INT GPIO\n");
-
- /* Free GPIOs controlled directly by the sensor drivers. */
- gpio_free(GPIO_CAM_MEGA_nRST);
- gpio_free(GPIO_CAM_8M_ISP_INT);
- gpio_free(GPIO_CAM_VGA_NRST);
- gpio_free(GPIO_CAM_VGA_NSTBY);
-
- if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A))
- pr_err("Camera port A setup failed\n");
-}
-
-static struct platform_device *universal_devices[] __initdata = {
- /* Samsung Platform Devices */
- &s5p_device_mipi_csis0,
- &s5p_device_fimc0,
- &s5p_device_fimc1,
- &s5p_device_fimc2,
- &s5p_device_fimc3,
- &s5p_device_g2d,
- &mmc0_fixed_voltage,
- &s3c_device_hsmmc0,
- &s3c_device_hsmmc2,
- &s3c_device_hsmmc3,
- &s3c_device_i2c0,
- &s3c_device_i2c3,
- &s3c_device_i2c5,
- &s5p_device_i2c_hdmiphy,
- &hdmi_fixed_voltage,
- &s5p_device_hdmi,
- &s5p_device_sdo,
- &s5p_device_mixer,
-
- /* Universal Devices */
- &i2c_gpio12,
- &universal_gpio_keys,
- &s5p_device_onenand,
- &s5p_device_fimd0,
- &s5p_device_jpeg,
- &s3c_device_usb_hsotg,
- &s5p_device_mfc,
- &s5p_device_mfc_l,
- &s5p_device_mfc_r,
- &cam_vt_dio_fixed_reg_dev,
- &cam_i_core_fixed_reg_dev,
- &cam_s_if_fixed_reg_dev,
- &s5p_device_fimc_md,
-};
-
-static void __init universal_map_io(void)
-{
- exynos_init_io(NULL, 0);
- s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs));
- exynos_set_timer_source(BIT(2) | BIT(4));
- xxti_f = 0;
- xusbxti_f = 24000000;
-}
-
-static void s5p_tv_setup(void)
-{
- /* direct HPD to HDMI chip */
- gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug");
- s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3));
- s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE);
-}
-
-static void __init universal_reserve(void)
-{
- s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20);
-}
-
-static void __init universal_machine_init(void)
-{
- universal_sdhci_init();
- s5p_tv_setup();
-
- s3c_i2c0_set_platdata(&universal_i2c0_platdata);
- i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs));
-
- universal_tsp_init();
- s3c_i2c3_set_platdata(NULL);
- i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs));
-
- s3c_i2c5_set_platdata(NULL);
- s5p_i2c_hdmiphy_set_platdata(NULL);
- i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs));
-
-#ifdef CONFIG_DRM_EXYNOS
- s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata;
- exynos4_fimd0_gpio_setup_24bpp();
-#else
- s5p_fimd0_set_platdata(&universal_lcd_pdata);
-#endif
-
- universal_touchkey_init();
- i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs,
- ARRAY_SIZE(i2c_gpio12_devs));
-
- s3c_hsotg_set_platdata(&universal_hsotg_pdata);
- universal_camera_init();
-
- /* Last */
- platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices));
-}
-
-MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210")
- /* Maintainer: Kyungmin Park <kyungmin.park@samsung.com> */
- .atag_offset = 0x100,
- .smp = smp_ops(exynos_smp_ops),
- .init_irq = exynos4_init_irq,
- .map_io = universal_map_io,
- .init_machine = universal_machine_init,
- .init_late = exynos_init_late,
- .init_time = exynos_init_time,
- .reserve = &universal_reserve,
- .restart = exynos4_restart,
-MACHINE_END
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index e3faaa812016..41c20692a13f 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -30,7 +30,6 @@
#include <plat/regs-srom.h>
#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
#include <mach/regs-clock.h>
#include <mach/regs-pmu.h>
#include <mach/pm-core.h>
diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c
index 9f1351de52f7..1703593e366c 100644
--- a/arch/arm/mach-exynos/pm_domains.c
+++ b/arch/arm/mach-exynos/pm_domains.c
@@ -74,17 +74,6 @@ static int exynos_pd_power_off(struct generic_pm_domain *domain)
return exynos_pd_power(domain, false);
}
-#define EXYNOS_GPD(PD, BASE, NAME) \
-static struct exynos_pm_domain PD = { \
- .base = (void __iomem *)BASE, \
- .name = NAME, \
- .pd = { \
- .power_off = exynos_pd_power_off, \
- .power_on = exynos_pd_power_on, \
- }, \
-}
-
-#ifdef CONFIG_OF
static void exynos_add_device_to_domain(struct exynos_pm_domain *pd,
struct device *dev)
{
@@ -157,7 +146,7 @@ static struct notifier_block platform_nb = {
.notifier_call = exynos_pm_notifier_call,
};
-static __init int exynos_pm_dt_parse_domains(void)
+static __init int exynos4_pm_init_power_domain(void)
{
struct platform_device *pdev;
struct device_node *np;
@@ -193,94 +182,6 @@ static __init int exynos_pm_dt_parse_domains(void)
return 0;
}
-#else
-static __init int exynos_pm_dt_parse_domains(void)
-{
- return 0;
-}
-#endif /* CONFIG_OF */
-
-static __init __maybe_unused void exynos_pm_add_dev_to_genpd(struct platform_device *pdev,
- struct exynos_pm_domain *pd)
-{
- if (pdev->dev.bus) {
- if (!pm_genpd_add_device(&pd->pd, &pdev->dev))
- pm_genpd_dev_need_restore(&pdev->dev, true);
- else
- pr_info("%s: error in adding %s device to %s power"
- "domain\n", __func__, dev_name(&pdev->dev),
- pd->name);
- }
-}
-
-EXYNOS_GPD(exynos4_pd_mfc, S5P_PMU_MFC_CONF, "pd-mfc");
-EXYNOS_GPD(exynos4_pd_g3d, S5P_PMU_G3D_CONF, "pd-g3d");
-EXYNOS_GPD(exynos4_pd_lcd0, S5P_PMU_LCD0_CONF, "pd-lcd0");
-EXYNOS_GPD(exynos4_pd_lcd1, S5P_PMU_LCD1_CONF, "pd-lcd1");
-EXYNOS_GPD(exynos4_pd_tv, S5P_PMU_TV_CONF, "pd-tv");
-EXYNOS_GPD(exynos4_pd_cam, S5P_PMU_CAM_CONF, "pd-cam");
-EXYNOS_GPD(exynos4_pd_gps, S5P_PMU_GPS_CONF, "pd-gps");
-
-static struct exynos_pm_domain *exynos4_pm_domains[] = {
- &exynos4_pd_mfc,
- &exynos4_pd_g3d,
- &exynos4_pd_lcd0,
- &exynos4_pd_lcd1,
- &exynos4_pd_tv,
- &exynos4_pd_cam,
- &exynos4_pd_gps,
-};
-
-static __init int exynos4_pm_init_power_domain(void)
-{
- int idx;
-
- if (of_have_populated_dt())
- return exynos_pm_dt_parse_domains();
-
- for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) {
- struct exynos_pm_domain *pd = exynos4_pm_domains[idx];
- int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN;
-
- pm_genpd_init(&pd->pd, NULL, !on);
- }
-
-#ifdef CONFIG_S5P_DEV_FIMD0
- exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0);
-#endif
-#ifdef CONFIG_S5P_DEV_TV
- exynos_pm_add_dev_to_genpd(&s5p_device_hdmi, &exynos4_pd_tv);
- exynos_pm_add_dev_to_genpd(&s5p_device_mixer, &exynos4_pd_tv);
-#endif
-#ifdef CONFIG_S5P_DEV_MFC
- exynos_pm_add_dev_to_genpd(&s5p_device_mfc, &exynos4_pd_mfc);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC0
- exynos_pm_add_dev_to_genpd(&s5p_device_fimc0, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC1
- exynos_pm_add_dev_to_genpd(&s5p_device_fimc1, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC2
- exynos_pm_add_dev_to_genpd(&s5p_device_fimc2, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_FIMC3
- exynos_pm_add_dev_to_genpd(&s5p_device_fimc3, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_CSIS0
- exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis0, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_CSIS1
- exynos_pm_add_dev_to_genpd(&s5p_device_mipi_csis1, &exynos4_pd_cam);
-#endif
-#ifdef CONFIG_S5P_DEV_G2D
- exynos_pm_add_dev_to_genpd(&s5p_device_g2d, &exynos4_pd_lcd0);
-#endif
-#ifdef CONFIG_S5P_DEV_JPEG
- exynos_pm_add_dev_to_genpd(&s5p_device_jpeg, &exynos4_pd_cam);
-#endif
- return 0;
-}
arch_initcall(exynos4_pm_init_power_domain);
int __init exynos_pm_late_initcall(void)
diff --git a/arch/arm/mach-exynos/setup-fimc.c b/arch/arm/mach-exynos/setup-fimc.c
deleted file mode 100644
index 6a45078d9d12..000000000000
--- a/arch/arm/mach-exynos/setup-fimc.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co., Ltd.
- *
- * Exynos4 camera interface GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/camport.h>
-
-int exynos4_fimc_setup_gpio(enum s5p_camport_id id)
-{
- u32 gpio8, gpio5;
- u32 sfn;
- int ret;
-
- switch (id) {
- case S5P_CAMPORT_A:
- gpio8 = EXYNOS4_GPJ0(0); /* PCLK, VSYNC, HREF, DATA[0:4] */
- gpio5 = EXYNOS4_GPJ1(0); /* DATA[5:7], CLKOUT, FIELD */
- sfn = S3C_GPIO_SFN(2);
- break;
-
- case S5P_CAMPORT_B:
- gpio8 = EXYNOS4_GPE0(0); /* DATA[0:7] */
- gpio5 = EXYNOS4_GPE1(0); /* PCLK, VSYNC, HREF, CLKOUT, FIELD */
- sfn = S3C_GPIO_SFN(3);
- break;
-
- default:
- WARN(1, "Wrong camport id: %d\n", id);
- return -EINVAL;
- }
-
- ret = s3c_gpio_cfgall_range(gpio8, 8, sfn, S3C_GPIO_PULL_UP);
- if (ret)
- return ret;
-
- return s3c_gpio_cfgall_range(gpio5, 5, sfn, S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-fimd0.c b/arch/arm/mach-exynos/setup-fimd0.c
deleted file mode 100644
index 5665bb4e980b..000000000000
--- a/arch/arm/mach-exynos/setup-fimd0.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-fimd0.c
- *
- * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * Base Exynos4 FIMD 0 configuration
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/fb.h>
-#include <linux/gpio.h>
-
-#include <video/samsung_fimd.h>
-#include <plat/gpio-cfg.h>
-
-#include <mach/map.h>
-
-void exynos4_fimd0_gpio_setup_24bpp(void)
-{
- unsigned int reg;
-
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF0(0), 8, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF1(0), 8, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF2(0), 8, S3C_GPIO_SFN(2));
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPF3(0), 4, S3C_GPIO_SFN(2));
-
- /*
- * Set DISPLAY_CONTROL register for Display path selection.
- *
- * DISPLAY_CONTROL[1:0]
- * ---------------------
- * 00 | MIE
- * 01 | MDINE
- * 10 | FIMD : selected
- * 11 | FIMD
- */
- reg = __raw_readl(S3C_VA_SYS + 0x0210);
- reg |= (1 << 1);
- __raw_writel(reg, S3C_VA_SYS + 0x0210);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c
deleted file mode 100644
index e2d9dfbf102c..000000000000
--- a/arch/arm/mach-exynos/setup-i2c0.c
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * Copyright (c) 2009-2012 Samsung Electronics Co., Ltd.
- * http://www.samsung.com/
- *
- * I2C0 GPIO configuration.
- *
- * Based on plat-s3c64xx/setup-i2c0.c
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-#include <plat/cpu.h>
-
-void s3c_i2c0_cfg_gpio(struct platform_device *dev)
-{
- if (soc_is_exynos5250() || soc_is_exynos5440())
- /* will be implemented with gpio function */
- return;
-
- s3c_gpio_cfgall_range(EXYNOS4_GPD1(0), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c
deleted file mode 100644
index 8d2279cc85dc..000000000000
--- a/arch/arm/mach-exynos/setup-i2c1.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c1.c
- *
- * Copyright (C) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C1 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c1_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPD1(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c
deleted file mode 100644
index 0ed62fc42a77..000000000000
--- a/arch/arm/mach-exynos/setup-i2c2.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c2.c
- *
- * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
- *
- * I2C2 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c2_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPA0(6), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c
deleted file mode 100644
index 7787fd26076b..000000000000
--- a/arch/arm/mach-exynos/setup-i2c3.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c3.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C3 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c3_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPA1(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c
deleted file mode 100644
index edc847f89826..000000000000
--- a/arch/arm/mach-exynos/setup-i2c4.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c4.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C4 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c4_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c
deleted file mode 100644
index d88af7f75954..000000000000
--- a/arch/arm/mach-exynos/setup-i2c5.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c5.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C5 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c5_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c
deleted file mode 100644
index c590286c9d3a..000000000000
--- a/arch/arm/mach-exynos/setup-i2c6.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c6.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C6 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c6_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
- S3C_GPIO_SFN(4), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c
deleted file mode 100644
index 1bba75568a5f..000000000000
--- a/arch/arm/mach-exynos/setup-i2c7.c
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- * linux/arch/arm/mach-exynos4/setup-i2c7.c
- *
- * Copyright (c) 2010 Samsung Electronics Co., Ltd.
- *
- * I2C7 GPIO configuration.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-struct platform_device; /* don't need the contents */
-
-#include <linux/gpio.h>
-#include <linux/platform_data/i2c-s3c2410.h>
-#include <plat/gpio-cfg.h>
-
-void s3c_i2c7_cfg_gpio(struct platform_device *dev)
-{
- s3c_gpio_cfgall_range(EXYNOS4_GPD0(2), 2,
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
-}
diff --git a/arch/arm/mach-exynos/setup-keypad.c b/arch/arm/mach-exynos/setup-keypad.c
deleted file mode 100644
index 7862bfb5933d..000000000000
--- a/arch/arm/mach-exynos/setup-keypad.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-keypad.c
- *
- * Copyright (c) 2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * GPIO configuration for Exynos4 KeyPad device
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols)
-{
- /* Keypads can be of various combinations, Just making sure */
-
- if (rows > 8) {
- /* Set all the necessary GPX2 pins: KP_ROW[0~7] */
- s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), 8, S3C_GPIO_SFN(3),
- S3C_GPIO_PULL_UP);
-
- /* Set all the necessary GPX3 pins: KP_ROW[8~] */
- s3c_gpio_cfgall_range(EXYNOS4_GPX3(0), (rows - 8),
- S3C_GPIO_SFN(3), S3C_GPIO_PULL_UP);
- } else {
- /* Set all the necessary GPX2 pins: KP_ROW[x] */
- s3c_gpio_cfgall_range(EXYNOS4_GPX2(0), rows, S3C_GPIO_SFN(3),
- S3C_GPIO_PULL_UP);
- }
-
- /* Set all the necessary GPX1 pins to special-function 3: KP_COL[x] */
- s3c_gpio_cfgrange_nopull(EXYNOS4_GPX1(0), cols, S3C_GPIO_SFN(3));
-}
diff --git a/arch/arm/mach-exynos/setup-sdhci-gpio.c b/arch/arm/mach-exynos/setup-sdhci-gpio.c
deleted file mode 100644
index d5b98c866738..000000000000
--- a/arch/arm/mach-exynos/setup-sdhci-gpio.c
+++ /dev/null
@@ -1,152 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-sdhci-gpio.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - Helper functions for setting up SDHCI device(s) GPIO (HSMMC)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/card.h>
-
-#include <mach/gpio.h>
-#include <plat/gpio-cfg.h>
-#include <plat/sdhci.h>
-
-void exynos4_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK0[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK0(0); gpio < EXYNOS4_GPK0(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- switch (width) {
- case 8:
- for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
- /* Data pin GPK1[3:6] to special-function 3 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- case 4:
- for (gpio = EXYNOS4_GPK0(3); gpio <= EXYNOS4_GPK0(6); gpio++) {
- /* Data pin GPK0[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- default:
- break;
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK0(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK0(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
-
-void exynos4_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK1[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK1(0); gpio < EXYNOS4_GPK1(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = EXYNOS4_GPK1(3); gpio <= EXYNOS4_GPK1(6); gpio++) {
- /* Data pin GPK1[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK1(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK1(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
-
-void exynos4_setup_sdhci2_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK2[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK2(0); gpio < EXYNOS4_GPK2(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- switch (width) {
- case 8:
- for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
- /* Data pin GPK3[3:6] to special-function 3 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(3));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- case 4:
- for (gpio = EXYNOS4_GPK2(3); gpio <= EXYNOS4_GPK2(6); gpio++) {
- /* Data pin GPK2[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
- default:
- break;
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK2(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK2(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
-
-void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *dev, int width)
-{
- struct s3c_sdhci_platdata *pdata = dev->dev.platform_data;
- unsigned int gpio;
-
- /* Set all the necessary GPK3[0:1] pins to special-function 2 */
- for (gpio = EXYNOS4_GPK3(0); gpio < EXYNOS4_GPK3(2); gpio++) {
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- for (gpio = EXYNOS4_GPK3(3); gpio <= EXYNOS4_GPK3(6); gpio++) {
- /* Data pin GPK3[3:6] to special-function 2 */
- s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2));
- s3c_gpio_setpull(gpio, S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-
- if (pdata->cd_type == S3C_SDHCI_CD_INTERNAL) {
- s3c_gpio_cfgpin(EXYNOS4_GPK3(2), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPK3(2), S3C_GPIO_PULL_UP);
- s5p_gpio_set_drvstr(gpio, S5P_GPIO_DRVSTR_LV4);
- }
-}
diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c
deleted file mode 100644
index 4999829d1c6e..000000000000
--- a/arch/arm/mach-exynos/setup-spi.c
+++ /dev/null
@@ -1,45 +0,0 @@
-/* linux/arch/arm/mach-exynos4/setup-spi.c
- *
- * Copyright (C) 2011 Samsung Electronics Ltd.
- * http://www.samsung.com/
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/gpio.h>
-#include <plat/gpio-cfg.h>
-
-#ifdef CONFIG_S3C64XX_DEV_SPI0
-int s3c64xx_spi0_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(EXYNOS4_GPB(2), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI1
-int s3c64xx_spi1_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2));
- s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(EXYNOS4_GPB(6), 2,
- S3C_GPIO_SFN(2), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
-
-#ifdef CONFIG_S3C64XX_DEV_SPI2
-int s3c64xx_spi2_cfg_gpio(void)
-{
- s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5));
- s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP);
- s3c_gpio_cfgall_range(EXYNOS4_GPC1(3), 2,
- S3C_GPIO_SFN(5), S3C_GPIO_PULL_UP);
- return 0;
-}
-#endif
diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c
deleted file mode 100644
index 6af40662a449..000000000000
--- a/arch/arm/mach-exynos/setup-usb-phy.c
+++ /dev/null
@@ -1,223 +0,0 @@
-/*
- * Copyright (C) 2011 Samsung Electronics Co.Ltd
- * Author: Joonyoung Shim <jy0922.shim@samsung.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-#include <mach/regs-pmu.h>
-#include <mach/regs-usb-phy.h>
-#include <plat/cpu.h>
-#include <plat/usb-phy.h>
-
-static atomic_t host_usage;
-
-static int exynos4_usb_host_phy_is_on(void)
-{
- return (readl(EXYNOS4_PHYPWR) & PHY1_STD_ANALOG_POWERDOWN) ? 0 : 1;
-}
-
-static void exynos4210_usb_phy_clkset(struct platform_device *pdev)
-{
- struct clk *xusbxti_clk;
- u32 phyclk;
-
- xusbxti_clk = clk_get(&pdev->dev, "xusbxti");
- if (xusbxti_clk && !IS_ERR(xusbxti_clk)) {
- if (soc_is_exynos4210()) {
- /* set clock frequency for PLL */
- phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK;
-
- switch (clk_get_rate(xusbxti_clk)) {
- case 12 * MHZ:
- phyclk |= EXYNOS4210_CLKSEL_12M;
- break;
- case 48 * MHZ:
- phyclk |= EXYNOS4210_CLKSEL_48M;
- break;
- default:
- case 24 * MHZ:
- phyclk |= EXYNOS4210_CLKSEL_24M;
- break;
- }
- writel(phyclk, EXYNOS4_PHYCLK);
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- /* set clock frequency for PLL */
- phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK;
-
- switch (clk_get_rate(xusbxti_clk)) {
- case 9600 * KHZ:
- phyclk |= EXYNOS4X12_CLKSEL_9600K;
- break;
- case 10 * MHZ:
- phyclk |= EXYNOS4X12_CLKSEL_10M;
- break;
- case 12 * MHZ:
- phyclk |= EXYNOS4X12_CLKSEL_12M;
- break;
- case 19200 * KHZ:
- phyclk |= EXYNOS4X12_CLKSEL_19200K;
- break;
- case 20 * MHZ:
- phyclk |= EXYNOS4X12_CLKSEL_20M;
- break;
- default:
- case 24 * MHZ:
- /* default reference clock */
- phyclk |= EXYNOS4X12_CLKSEL_24M;
- break;
- }
- writel(phyclk, EXYNOS4_PHYCLK);
- }
- clk_put(xusbxti_clk);
- }
-}
-
-static int exynos4210_usb_phy0_init(struct platform_device *pdev)
-{
- u32 rstcon;
-
- writel(readl(S5P_USBDEVICE_PHY_CONTROL) | S5P_USBDEVICE_PHY_ENABLE,
- S5P_USBDEVICE_PHY_CONTROL);
-
- exynos4210_usb_phy_clkset(pdev);
-
- /* set to normal PHY0 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY0_NORMAL_MASK), EXYNOS4_PHYPWR);
-
- /* reset PHY0 and Link */
- rstcon = readl(EXYNOS4_RSTCON) | PHY0_SWRST_MASK;
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(10);
-
- rstcon &= ~PHY0_SWRST_MASK;
- writel(rstcon, EXYNOS4_RSTCON);
-
- return 0;
-}
-
-static int exynos4210_usb_phy0_exit(struct platform_device *pdev)
-{
- writel((readl(EXYNOS4_PHYPWR) | PHY0_ANALOG_POWERDOWN |
- PHY0_OTG_DISABLE), EXYNOS4_PHYPWR);
-
- writel(readl(S5P_USBDEVICE_PHY_CONTROL) & ~S5P_USBDEVICE_PHY_ENABLE,
- S5P_USBDEVICE_PHY_CONTROL);
-
- return 0;
-}
-
-static int exynos4210_usb_phy1_init(struct platform_device *pdev)
-{
- struct clk *otg_clk;
- u32 rstcon;
- int err;
-
- atomic_inc(&host_usage);
-
- otg_clk = clk_get(&pdev->dev, "otg");
- if (IS_ERR(otg_clk)) {
- dev_err(&pdev->dev, "Failed to get otg clock\n");
- return PTR_ERR(otg_clk);
- }
-
- err = clk_enable(otg_clk);
- if (err) {
- clk_put(otg_clk);
- return err;
- }
-
- if (exynos4_usb_host_phy_is_on())
- return 0;
-
- writel(readl(S5P_USBHOST_PHY_CONTROL) | S5P_USBHOST_PHY_ENABLE,
- S5P_USBHOST_PHY_CONTROL);
-
- exynos4210_usb_phy_clkset(pdev);
-
- /* floating prevention logic: disable */
- writel((readl(EXYNOS4_PHY1CON) | FPENABLEN), EXYNOS4_PHY1CON);
-
- /* set to normal HSIC 0 and 1 of PHY1 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY1_HSIC_NORMAL_MASK),
- EXYNOS4_PHYPWR);
-
- /* set to normal standard USB of PHY1 */
- writel((readl(EXYNOS4_PHYPWR) & ~PHY1_STD_NORMAL_MASK), EXYNOS4_PHYPWR);
-
- /* reset all ports of both PHY and Link */
- rstcon = readl(EXYNOS4_RSTCON) | HOST_LINK_PORT_SWRST_MASK |
- PHY1_SWRST_MASK;
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(10);
-
- rstcon &= ~(HOST_LINK_PORT_SWRST_MASK | PHY1_SWRST_MASK);
- writel(rstcon, EXYNOS4_RSTCON);
- udelay(80);
-
- clk_disable(otg_clk);
- clk_put(otg_clk);
-
- return 0;
-}
-
-static int exynos4210_usb_phy1_exit(struct platform_device *pdev)
-{
- struct clk *otg_clk;
- int err;
-
- if (atomic_dec_return(&host_usage) > 0)
- return 0;
-
- otg_clk = clk_get(&pdev->dev, "otg");
- if (IS_ERR(otg_clk)) {
- dev_err(&pdev->dev, "Failed to get otg clock\n");
- return PTR_ERR(otg_clk);
- }
-
- err = clk_enable(otg_clk);
- if (err) {
- clk_put(otg_clk);
- return err;
- }
-
- writel((readl(EXYNOS4_PHYPWR) | PHY1_STD_ANALOG_POWERDOWN),
- EXYNOS4_PHYPWR);
-
- writel(readl(S5P_USBHOST_PHY_CONTROL) & ~S5P_USBHOST_PHY_ENABLE,
- S5P_USBHOST_PHY_CONTROL);
-
- clk_disable(otg_clk);
- clk_put(otg_clk);
-
- return 0;
-}
-
-int s5p_usb_phy_init(struct platform_device *pdev, int type)
-{
- if (type == USB_PHY_TYPE_DEVICE)
- return exynos4210_usb_phy0_init(pdev);
- else if (type == USB_PHY_TYPE_HOST)
- return exynos4210_usb_phy1_init(pdev);
-
- return -EINVAL;
-}
-
-int s5p_usb_phy_exit(struct platform_device *pdev, int type)
-{
- if (type == USB_PHY_TYPE_DEVICE)
- return exynos4210_usb_phy0_exit(pdev);
- else if (type == USB_PHY_TYPE_HOST)
- return exynos4210_usb_phy1_exit(pdev);
-
- return -EINVAL;
-}