aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/boot/dts/omap4-panda-common.dtsi
diff options
context:
space:
mode:
authorBalaji T K <balajitk@ti.com>2013-12-02 11:38:13 -0800
committerTony Lindgren <tony@atomide.com>2013-12-02 11:38:13 -0800
commit2ba2866f782f7f1c38abc3dd56d3295efd289264 (patch)
treef04ebd55521d179704c65bf6134d981fd9e37f47 /arch/arm/boot/dts/omap4-panda-common.dtsi
parent9cb238c00ba5c1ddfff2c2ed6aa66c15b962e4c3 (diff)
downloadlinux-linaro-stable-2ba2866f782f7f1c38abc3dd56d3295efd289264.tar.gz
ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx
pin mux wl12xx_gpio and wl12xx_pins should be part of omap4_pmx_core and not omap4_pmx_wkup. So, move wl12xx_* to omap4_pmx_core. Fix the following error message: pinctrl-single 4a31e040.pinmux: mux offset out of range: 0x38 (0x38) pinctrl-single 4a31e040.pinmux: could not add functions for pinmux_wl12xx_pins 56x SDIO card is not detected after moving pin mux to omap4_pmx_core since sdmmc5_clk pull is disabled. Enable Pull up on sdmmc5_clk to detect SDIO card. This fixes a regression where WLAN did not work after a warm reset or after one up/down cycle that happened when we move omap4 to boot using device tree only. For reference, the kernel bug is described at: https://bugzilla.kernel.org/show_bug.cgi?id=63821 Cc: stable@vger.kernel.org # v3.10+ Signed-off-by: Balaji T K <balajitk@ti.com> [tony@atomide.com: update comments to describe the regression] Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/boot/dts/omap4-panda-common.dtsi')
-rw-r--r--arch/arm/boot/dts/omap4-panda-common.dtsi20
1 files changed, 10 insertions, 10 deletions
diff --git a/arch/arm/boot/dts/omap4-panda-common.dtsi b/arch/arm/boot/dts/omap4-panda-common.dtsi
index 298e85020e1b..88c6a05cab41 100644
--- a/arch/arm/boot/dts/omap4-panda-common.dtsi
+++ b/arch/arm/boot/dts/omap4-panda-common.dtsi
@@ -246,15 +246,6 @@
0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c4_sda */
>;
};
-};
-
-&omap4_pmx_wkup {
- led_wkgpio_pins: pinmux_leds_wkpins {
- pinctrl-single,pins = <
- 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
- 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
- >;
- };
/*
* wl12xx GPIO outputs for WLAN_EN, BT_EN, FM_EN, BT_WAKEUP
@@ -274,7 +265,7 @@
pinctrl-single,pins = <
0x38 (PIN_INPUT | MUX_MODE3) /* gpmc_ncs2.gpio_52 */
0x3a (PIN_INPUT | MUX_MODE3) /* gpmc_ncs3.gpio_53 */
- 0x108 (PIN_OUTPUT | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
+ 0x108 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_clk.sdmmc5_clk */
0x10a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_cmd.sdmmc5_cmd */
0x10c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat0.sdmmc5_dat0 */
0x10e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc5_dat1.sdmmc5_dat1 */
@@ -284,6 +275,15 @@
};
};
+&omap4_pmx_wkup {
+ led_wkgpio_pins: pinmux_leds_wkpins {
+ pinctrl-single,pins = <
+ 0x1a (PIN_OUTPUT | MUX_MODE3) /* gpio_wk7 */
+ 0x1c (PIN_OUTPUT | MUX_MODE3) /* gpio_wk8 */
+ >;
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;