aboutsummaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:06:17 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2013-05-07 11:06:17 -0700
commit38f56f33ca381751f9b8910f67e7a805ec0b68cb (patch)
tree202f2ce60f3f43a948607ec76c8cc48c1cf73a4b /Documentation
parentfcba914542082b272f31c8e4c40000b88ed3208d (diff)
parent4183bef2e093a2f0aab45f2d5fed82b0e02aeacf (diff)
downloadlinux-linaro-stable-38f56f33ca381751f9b8910f67e7a805ec0b68cb.tar.gz
Merge tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates (part 2) from Arnd Bergmann: "These are mostly new device tree bindings for existing drivers, as well as changes to the device tree source files to add support for those devices, and a couple of new boards, most notably Samsung's Exynos5 based Chromebook. The changes depend on earlier platform specific updates and touch the usual platforms: omap, exynos, tegra, mxs, mvebu and davinci." * tag 'dt-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (169 commits) ARM: exynos: dts: cros5250: add EC device ARM: dts: Add sbs-battery for exynos5250-snow ARM: dts: Add i2c-arbitrator bus for exynos5250-snow ARM: dts: add mshc controller node for Exynos4x12 SoCs ARM: dts: Add chip-id controller node on Exynos4/5 SoC ARM: EXYNOS: Create virtual I/O mapping for Chip-ID controller using device tree ARM: davinci: da850-evm: add SPI flash support ARM: davinci: da850: override SPI DT node device name ARM: davinci: da850: add SPI1 DT node spi/davinci: add DT binding documentation spi/davinci: no wildcards in DT compatible property ARM: dts: mvebu: Convert mvebu device tree files to 64 bits ARM: dts: mvebu: introduce internal-regs node ARM: dts: mvebu: Convert all the mvebu files to use the range property ARM: dts: mvebu: move all peripherals inside soc ARM: dts: mvebu: fix cpus section indentation ARM: davinci: da850: add EHRPWM & ECAP DT node ARM/dts: OMAP3: fix pinctrl-single configuration ARM: dts: Add OMAP3430 SDP NOR flash memory binding ARM: dts: Add NOR flash bindings for OMAP2420 H4 ...
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/devicetree/bindings/arm/omap/l3-noc.txt1
-rw-r--r--Documentation/devicetree/bindings/arm/omap/timer.txt17
-rw-r--r--Documentation/devicetree/bindings/arm/samsung/sysreg.txt7
-rw-r--r--Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt49
-rw-r--r--Documentation/devicetree/bindings/fb/mxsfb.txt36
-rw-r--r--Documentation/devicetree/bindings/gpio/gpio-omap.txt8
-rw-r--r--Documentation/devicetree/bindings/gpu/samsung-g2d.txt20
-rw-r--r--Documentation/devicetree/bindings/i2c/i2c-mxs.txt12
-rw-r--r--Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt60
-rw-r--r--Documentation/devicetree/bindings/mmc/mxs-mmc.txt12
-rw-r--r--Documentation/devicetree/bindings/mtd/gpmi-nand.txt17
-rw-r--r--Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt4
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt8
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt7
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt8
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt8
-rw-r--r--Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt8
-rw-r--r--Documentation/devicetree/bindings/spi/mxs-spi.txt12
-rw-r--r--Documentation/devicetree/bindings/spi/spi-davinci.txt51
-rw-r--r--Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt16
-rw-r--r--Documentation/devicetree/bindings/usb/exynos-usb.txt10
-rw-r--r--Documentation/devicetree/bindings/usb/omap-usb.txt1
-rw-r--r--Documentation/devicetree/bindings/video/samsung-fimd.txt65
23 files changed, 396 insertions, 41 deletions
diff --git a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
index 6888a5efc860..c0105de55cbd 100644
--- a/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
+++ b/Documentation/devicetree/bindings/arm/omap/l3-noc.txt
@@ -6,6 +6,7 @@ provided by Arteris.
Required properties:
- compatible : Should be "ti,omap3-l3-smx" for OMAP3 family
Should be "ti,omap4-l3-noc" for OMAP4 family
+- reg: Contains L3 register address range for each noc domain.
- ti,hwmods: "l3_main_1", ... One hwmod for each noc domain.
Examples:
diff --git a/Documentation/devicetree/bindings/arm/omap/timer.txt b/Documentation/devicetree/bindings/arm/omap/timer.txt
index 8732d4d41f8b..d02e27c764ec 100644
--- a/Documentation/devicetree/bindings/arm/omap/timer.txt
+++ b/Documentation/devicetree/bindings/arm/omap/timer.txt
@@ -1,7 +1,20 @@
OMAP Timer bindings
Required properties:
-- compatible: Must be "ti,omap2-timer" for OMAP2+ controllers.
+- compatible: Should be set to one of the below. Please note that
+ OMAP44xx devices have timer instances that are 100%
+ register compatible with OMAP3xxx devices as well as
+ newer timers that are not 100% register compatible.
+ So for OMAP44xx devices timer instances may use
+ different compatible strings.
+
+ ti,omap2420-timer (applicable to OMAP24xx devices)
+ ti,omap3430-timer (applicable to OMAP3xxx/44xx devices)
+ ti,omap4430-timer (applicable to OMAP44xx devices)
+ ti,omap5430-timer (applicable to OMAP543x devices)
+ ti,am335x-timer (applicable to AM335x devices)
+ ti,am335x-timer-1ms (applicable to AM335x devices)
+
- reg: Contains timer register address range (base address and
length).
- interrupts: Contains the interrupt information for the timer. The
@@ -22,7 +35,7 @@ Optional properties:
Example:
timer12: timer@48304000 {
- compatible = "ti,omap2-timer";
+ compatible = "ti,omap3430-timer";
reg = <0x48304000 0x400>;
interrupts = <95>;
ti,hwmods = "timer12"
diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
new file mode 100644
index 000000000000..5039c0a12f55
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt
@@ -0,0 +1,7 @@
+SAMSUNG S5P/Exynos SoC series System Registers (SYSREG)
+
+Properties:
+ - name : should be 'sysreg';
+ - compatible : should contain "samsung,<chip name>-sysreg", "syscon";
+ For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon";
+ - reg : offset and length of the register set.
diff --git a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
index ded0398d3bdc..a4873e5e3e36 100644
--- a/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
+++ b/Documentation/devicetree/bindings/dma/fsl-mxs-dma.txt
@@ -3,17 +3,58 @@
Required properties:
- compatible : Should be "fsl,<chip>-dma-apbh" or "fsl,<chip>-dma-apbx"
- reg : Should contain registers location and length
+- interrupts : Should contain the interrupt numbers of DMA channels.
+ If a channel is empty/reserved, 0 should be filled in place.
+- #dma-cells : Must be <1>. The number cell specifies the channel ID.
+- dma-channels : Number of channels supported by the DMA controller
+
+Optional properties:
+- interrupt-names : Name of DMA channel interrupts
Supported chips:
imx23, imx28.
Examples:
-dma-apbh@80004000 {
+
+dma_apbh: dma-apbh@80004000 {
compatible = "fsl,imx28-dma-apbh";
- reg = <0x80004000 2000>;
+ reg = <0x80004000 0x2000>;
+ interrupts = <82 83 84 85
+ 88 88 88 88
+ 88 88 88 88
+ 87 86 0 0>;
+ interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
+ "gpmi0", "gmpi1", "gpmi2", "gmpi3",
+ "gpmi4", "gmpi5", "gpmi6", "gmpi7",
+ "hsadc", "lcdif", "empty", "empty";
+ #dma-cells = <1>;
+ dma-channels = <16>;
};
-dma-apbx@80024000 {
+dma_apbx: dma-apbx@80024000 {
compatible = "fsl,imx28-dma-apbx";
- reg = <0x80024000 2000>;
+ reg = <0x80024000 0x2000>;
+ interrupts = <78 79 66 0
+ 80 81 68 69
+ 70 71 72 73
+ 74 75 76 77>;
+ interrupt-names = "auart4-rx", "aurat4-tx", "spdif-tx", "empty",
+ "saif0", "saif1", "i2c0", "i2c1",
+ "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
+ "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
+ #dma-cells = <1>;
+ dma-channels = <16>;
+};
+
+DMA clients connected to the MXS DMA controller must use the format
+described in the dma.txt file.
+
+Examples:
+
+auart0: serial@8006a000 {
+ compatible = "fsl,imx28-auart", "fsl,imx23-auart";
+ reg = <0x8006a000 0x2000>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
};
diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt
index b41e5e52a676..96ec5179c8a0 100644
--- a/Documentation/devicetree/bindings/fb/mxsfb.txt
+++ b/Documentation/devicetree/bindings/fb/mxsfb.txt
@@ -5,9 +5,16 @@ Required properties:
imx23 and imx28.
- reg: Address and length of the register set for lcdif
- interrupts: Should contain lcdif interrupts
+- display : phandle to display node (see below for details)
-Optional properties:
-- panel-enable-gpios : Should specify the gpio for panel enable
+* display node
+
+Required properties:
+- bits-per-pixel : <16> for RGB565, <32> for RGB888/666.
+- bus-width : number of data lines. Could be <8>, <16>, <18> or <24>.
+
+Required sub-node:
+- display-timings : Refer to binding doc display-timing.txt for details.
Examples:
@@ -15,5 +22,28 @@ lcdif@80030000 {
compatible = "fsl,imx28-lcdif";
reg = <0x80030000 2000>;
interrupts = <38 86>;
- panel-enable-gpios = <&gpio3 30 0>;
+
+ display: display {
+ bits-per-pixel = <32>;
+ bus-width = <24>;
+
+ display-timings {
+ native-mode = <&timing0>;
+ timing0: timing0 {
+ clock-frequency = <33500000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <164>;
+ hback-porch = <89>;
+ hsync-len = <10>;
+ vback-porch = <23>;
+ vfront-porch = <10>;
+ vsync-len = <10>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <0>;
+ };
+ };
+ };
};
diff --git a/Documentation/devicetree/bindings/gpio/gpio-omap.txt b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
index 1b524c0c79fe..8d950522e7fa 100644
--- a/Documentation/devicetree/bindings/gpio/gpio-omap.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-omap.txt
@@ -5,12 +5,12 @@ Required properties:
- "ti,omap2-gpio" for OMAP2 controllers
- "ti,omap3-gpio" for OMAP3 controllers
- "ti,omap4-gpio" for OMAP4 controllers
+- gpio-controller : Marks the device node as a GPIO controller.
- #gpio-cells : Should be two.
- first cell is the pin number
- second cell is used to specify optional parameters (unused)
-- gpio-controller : Marks the device node as a GPIO controller.
+- interrupt-controller: Mark the device node as an interrupt controller.
- #interrupt-cells : Should be 2.
-- interrupt-controller: Mark the device node as an interrupt controller
The first cell is the GPIO number.
The second cell is used to specify flags:
bits[3:0] trigger type and level flags:
@@ -32,8 +32,8 @@ Example:
gpio4: gpio4 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio4";
- #gpio-cells = <2>;
gpio-controller;
- #interrupt-cells = <2>;
+ #gpio-cells = <2>;
interrupt-controller;
+ #interrupt-cells = <2>;
};
diff --git a/Documentation/devicetree/bindings/gpu/samsung-g2d.txt b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
new file mode 100644
index 000000000000..2b14a940eb75
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpu/samsung-g2d.txt
@@ -0,0 +1,20 @@
+* Samsung 2D Graphics Accelerator
+
+Required properties:
+ - compatible : value should be one among the following:
+ (a) "samsung,s5pv210-g2d" for G2D IP present in S5PV210 & Exynos4210 SoC
+ (b) "samsung,exynos4212-g2d" for G2D IP present in Exynos4x12 SoCs
+ (c) "samsung,exynos5250-g2d" for G2D IP present in Exynos5250 SoC
+
+ - reg : Physical base address of the IP registers and length of memory
+ mapped region.
+
+ - interrupts : G2D interrupt number to the CPU.
+
+Example:
+ g2d@12800000 {
+ compatible = "samsung,s5pv210-g2d";
+ reg = <0x12800000 0x1000>;
+ interrupts = <0 89 0>;
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
index 7a3fe9e5f4cb..4e1c8ac01eba 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt
@@ -3,10 +3,13 @@
Required properties:
- compatible: Should be "fsl,<chip>-i2c"
- reg: Should contain registers location and length
-- interrupts: Should contain ERROR and DMA interrupts
+- interrupts: Should contain ERROR interrupt number
- clock-frequency: Desired I2C bus clock frequency in Hz.
Only 100000Hz and 400000Hz modes are supported.
-- fsl,i2c-dma-channel: APBX DMA channel for the I2C
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and I2C DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Examples:
@@ -15,7 +18,8 @@ i2c0: i2c@80058000 {
#size-cells = <0>;
compatible = "fsl,imx28-i2c";
reg = <0x80058000 2000>;
- interrupts = <111 68>;
+ interrupts = <111>;
clock-frequency = <100000>;
- fsl,i2c-dma-channel = <6>;
+ dmas = <&dma_apbx 6>;
+ dma-names = "rx-tx";
};
diff --git a/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
new file mode 100644
index 000000000000..ef77cc7a0e46
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/nvidia,tegra20-i2c.txt
@@ -0,0 +1,60 @@
+NVIDIA Tegra20/Tegra30/Tegra114 I2C controller driver.
+
+Required properties:
+- compatible : should be:
+ "nvidia,tegra114-i2c"
+ "nvidia,tegra30-i2c"
+ "nvidia,tegra20-i2c"
+ "nvidia,tegra20-i2c-dvc"
+ Details of compatible are as follows:
+ nvidia,tegra20-i2c-dvc: Tegra20 has specific I2C controller called as DVC I2C
+ controller. This only support master mode of I2C communication. Register
+ interface/offset and interrupts handling are different than generic I2C
+ controller. Driver of DVC I2C controller is only compatible with
+ "nvidia,tegra20-i2c-dvc".
+ nvidia,tegra20-i2c: Tegra20 has 4 generic I2C controller. This can support
+ master and slave mode of I2C communication. The i2c-tegra driver only
+ support master mode of I2C communication. Driver of I2C controller is
+ only compatible with "nvidia,tegra20-i2c".
+ nvidia,tegra30-i2c: Tegra30 has 5 generic I2C controller. This controller is
+ very much similar to Tegra20 I2C controller with additional feature:
+ Continue Transfer Support. This feature helps to implement M_NO_START
+ as per I2C core API transfer flags. Driver of I2C controller is
+ compatible with "nvidia,tegra30-i2c" to enable the continue transfer
+ support. This is also compatible with "nvidia,tegra20-i2c" without
+ continue transfer support.
+ nvidia,tegra114-i2c: Tegra114 has 5 generic I2C controller. This controller is
+ very much similar to Tegra30 I2C controller with some hardware
+ modification:
+ - Tegra30/Tegra20 I2C controller has 2 clock source called div-clk and
+ fast-clk. Tegra114 has only one clock source called as div-clk and
+ hence clock mechanism is changed in I2C controller.
+ - Tegra30/Tegra20 I2C controller has enabled per packet transfer by
+ default and there is no way to disable it. Tegra114 has this
+ interrupt disable by default and SW need to enable explicitly.
+ Due to above changes, Tegra114 I2C driver makes incompatible with
+ previous hardware driver. Hence, tegra114 I2C controller is compatible
+ with "nvidia,tegra114-i2c".
+- reg: Should contain I2C controller registers physical address and length.
+- interrupts: Should contain I2C controller interrupts.
+- address-cells: Address cells for I2C device address.
+- size-cells: Size of the I2C device address.
+- clocks: Clock ID as per
+ Documentation/devicetree/bindings/clock/tegra<chip-id>.txt
+ for I2C controller.
+- clock-names: Name of the clock:
+ Tegra20/Tegra30 I2C controller: "div-clk and "fast-clk".
+ Tegra114 I2C controller: "div-clk".
+
+Example:
+
+ i2c@7000c000 {
+ compatible = "nvidia,tegra20-i2c";
+ reg = <0x7000c000 0x100>;
+ interrupts = <0 38 0x04>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car 12>, <&tegra_car 124>;
+ clock-names = "div-clk", "fast-clk";
+ status = "disabled";
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
index 54949f6faede..515addc20070 100644
--- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt
@@ -9,15 +9,19 @@ and the properties used by the mxsmmc driver.
Required properties:
- compatible: Should be "fsl,<chip>-mmc". The supported chips include
imx23 and imx28.
-- interrupts: Should contain ERROR and DMA interrupts
-- fsl,ssp-dma-channel: APBH DMA channel for the SSP
+- interrupts: Should contain ERROR interrupt number
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and SSP DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Examples:
ssp0: ssp@80010000 {
compatible = "fsl,imx28-mmc";
reg = <0x80010000 2000>;
- interrupts = <96 82>;
- fsl,ssp-dma-channel = <0>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
bus-width = <8>;
};
diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
index 3fb3f9015365..551b2a179d01 100644
--- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt
@@ -7,10 +7,12 @@ Required properties:
- compatible : should be "fsl,<chip>-gpmi-nand"
- reg : should contain registers location and length for gpmi and bch.
- reg-names: Should contain the reg names "gpmi-nand" and "bch"
- - interrupts : The first is the DMA interrupt number for GPMI.
- The second is the BCH interrupt number.
- - interrupt-names : The interrupt names "gpmi-dma", "bch";
- - fsl,gpmi-dma-channel : Should contain the dma channel it uses.
+ - interrupts : BCH interrupt number.
+ - interrupt-names : Should be "bch".
+ - dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and GPMI DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+ - dma-names: Must be "rx-tx".
Optional properties:
- nand-on-flash-bbt: boolean to enable on flash bbt option if not
@@ -27,9 +29,10 @@ gpmi-nand@8000c000 {
#size-cells = <1>;
reg = <0x8000c000 2000>, <0x8000a000 2000>;
reg-names = "gpmi-nand", "bch";
- interrupts = <88>, <41>;
- interrupt-names = "gpmi-dma", "bch";
- fsl,gpmi-dma-channel = <4>;
+ interrupts = <41>;
+ interrupt-names = "bch";
+ dmas = <&dma_apbh 4>;
+ dma-names = "rx-tx";
partition@0 {
...
diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
index f7e8e8f4d9a3..3077370c89af 100644
--- a/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/fsl,mxs-pinctrl.txt
@@ -70,6 +70,10 @@ Optional subnode-properties:
0: Disable the internal pull-up
1: Enable the internal pull-up
+Note that when enabling the pull-up, the internal pad keeper gets disabled.
+Also, some pins doesn't have a pull up, in that case, setting the fsl,pull-up
+will only disable the internal pad keeper.
+
Examples:
pinctrl@80018000 {
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
index b77a97c9101e..05ffecb57103 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt
@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-alc5632"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
@@ -56,4 +61,7 @@ sound {
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&alc5632>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
index 04b14cfb1f16..ef1fe7358279 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt
@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex for TrimSlice
Required properties:
- compatible : "nvidia,tegra-audio-trimslice"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,i2s-controller : The phandle of the Tegra I2S1 controller
- nvidia,audio-codec : The phandle of the WM8903 audio codec
@@ -11,4 +16,6 @@ sound {
compatible = "nvidia,tegra-audio-trimslice";
nvidia,i2s-controller = <&tegra_i2s1>;
nvidia,audio-codec = <&codec>;
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
index c4dd39ce6165..d14510613a7f 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt
@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8753"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
@@ -50,5 +55,8 @@ sound {
nvidia,i2s-controller = <&i2s1>;
nvidia,audio-codec = <&wm8753>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
index d5b0da8bf1d8..3bf722deb722 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt
@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm8903"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
@@ -67,5 +72,8 @@ sound {
nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */
nvidia,int-mic-en-gpios = <&gpio 184 0>; /*gpio PX0 */
nvidia,ext-mic-en-gpios = <&gpio 185 0>; /* gpio PX1 */
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
diff --git a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
index be35d34e8b26..ad589b163639 100644
--- a/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
+++ b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm9712.txt
@@ -2,6 +2,11 @@ NVIDIA Tegra audio complex
Required properties:
- compatible : "nvidia,tegra-audio-wm9712"
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "pll_a" (The Tegra clock of that name),
+ "pll_a_out0" (The Tegra clock of that name),
+ "mclk" (The Tegra cdev1/extern1 clock, which feeds the CODEC's mclk)
- nvidia,model : The user-visible name of this sound complex.
- nvidia,audio-routing : A list of the connections between audio components.
Each entry is a pair of strings, the first being the connection's sink,
@@ -48,4 +53,7 @@ sound {
"Mic", "MIC1";
nvidia,ac97-controller = <&ac97>;
+
+ clocks = <&tegra_car 112>, <&tegra_car 113>, <&tegra_car 93>;
+ clock-names = "pll_a", "pll_a_out0", "mclk";
};
diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt
index e2e13957c2a4..3499b73293c2 100644
--- a/Documentation/devicetree/bindings/spi/mxs-spi.txt
+++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt
@@ -3,8 +3,11 @@
Required properties:
- compatible: Should be "fsl,<soc>-spi", where soc is "imx23" or "imx28"
- reg: Offset and length of the register set for the device
-- interrupts: Should contain SSP interrupts (error irq first, dma irq second)
-- fsl,ssp-dma-channel: APBX DMA channel for the SSP
+- interrupts: Should contain SSP ERROR interrupt
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and SSP DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: Must be "rx-tx".
Optional properties:
- clock-frequency : Input clock frequency to the SPI block in Hz.
@@ -17,6 +20,7 @@ ssp0: ssp@80010000 {
#size-cells = <0>;
compatible = "fsl,imx28-spi";
reg = <0x80010000 0x2000>;
- interrupts = <96 82>;
- fsl,ssp-dma-channel = <0>;
+ interrupts = <96>;
+ dmas = <&dma_apbh 0>;
+ dma-names = "rx-tx";
};
diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt
new file mode 100644
index 000000000000..6d0ac8d0ad9b
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt
@@ -0,0 +1,51 @@
+Davinci SPI controller device bindings
+
+Required properties:
+- #address-cells: number of cells required to define a chip select
+ address on the SPI bus. Should be set to 1.
+- #size-cells: should be zero.
+- compatible:
+ - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family
+ - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family
+- reg: Offset and length of SPI controller register space
+- num-cs: Number of chip selects
+- ti,davinci-spi-intr-line: interrupt line used to connect the SPI
+ IP to the interrupt controller within the SoC. Possible values
+ are 0 and 1. Manual says one of the two possible interrupt
+ lines can be tied to the interrupt controller. Set this
+ based on a specifc SoC configuration.
+- interrupts: interrupt number mapped to CPU.
+- clocks: spi clk phandle
+
+Example of a NOR flash slave device (n25q032) connected to DaVinci
+SPI controller device over the SPI bus.
+
+spi0:spi@20BF0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,dm6446-spi";
+ reg = <0x20BF0000 0x1000>;
+ num-cs = <4>;
+ ti,davinci-spi-intr-line = <0>;
+ interrupts = <338>;
+ clocks = <&clkspi>;
+
+ flash: n25q032@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "st,m25p32";
+ spi-max-frequency = <25000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "u-boot-spl";
+ reg = <0x0 0x80000>;
+ read-only;
+ };
+
+ partition@1 {
+ label = "test";
+ reg = <0x80000 0x380000>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
index 273a8d5b3300..2c00ec64628e 100644
--- a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
+++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt
@@ -5,20 +5,18 @@ Required properties:
imx23 and imx28.
- reg : Address and length of the register set for the device
- interrupts : Should contain the auart interrupt numbers
-
-Optional properties:
-- fsl,auart-dma-channel : The DMA channels, the first is for RX, the other
- is for TX. If you add this property, it also means that you
- will enable the DMA support for the auart.
- Note: due to the hardware bug in imx23(see errata : 2836),
- only the imx28 can enable the DMA support for the auart.
+- dmas: DMA specifier, consisting of a phandle to DMA controller node
+ and AUART DMA channel ID.
+ Refer to dma.txt and fsl-mxs-dma.txt for details.
+- dma-names: "rx" for RX channel, "tx" for TX channel.
Example:
auart0: serial@8006a000 {
compatible = "fsl,imx28-auart", "fsl,imx23-auart";
reg = <0x8006a000 0x2000>;
- interrupts = <112 70 71>;
- fsl,auart-dma-channel = <8 9>;
+ interrupts = <112>;
+ dmas = <&dma_apbx 8>, <&dma_apbx 9>;
+ dma-names = "rx", "tx";
};
Note: Each auart port should have an alias correctly numbered in "aliases"
diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
index f66fcddba46f..b3abde736017 100644
--- a/Documentation/devicetree/bindings/usb/exynos-usb.txt
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -10,6 +10,8 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
Optional properties:
- samsung,vbus-gpio: if present, specifies the GPIO that
@@ -22,6 +24,9 @@ Example:
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
};
OHCI
@@ -31,10 +36,15 @@ Required properties:
- reg: physical base address of the controller and length of memory mapped
region.
- interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
Example:
usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
+
+ clocks = <&clock 285>;
+ clock-names = "usbhost";
};
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt
index 662f0f1d2315..d4769f343d6c 100644
--- a/Documentation/devicetree/bindings/usb/omap-usb.txt
+++ b/Documentation/devicetree/bindings/usb/omap-usb.txt
@@ -18,6 +18,7 @@ OMAP MUSB GLUE
represents PERIPHERAL.
- power : Should be "50". This signifies the controller can supply upto
100mA when operating in host mode.
+ - usb-phy : the phandle for the PHY device
Optional properties:
- ctrl-module : phandle of the control module this glue uses to write to
diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt
new file mode 100644
index 000000000000..778838a0336a
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt
@@ -0,0 +1,65 @@
+Device-Tree bindings for Samsung SoC display controller (FIMD)
+
+FIMD (Fully Interactive Mobile Display) is the Display Controller for the
+Samsung series of SoCs which transfers the image data from a video memory
+buffer to an external LCD interface.
+
+Required properties:
+- compatible: value should be one of the following
+ "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */
+ "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */
+ "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */
+ "samsung,s5pc100-fimd"; /* for S5PC100 SoC */
+ "samsung,s5pv210-fimd"; /* for S5PV210 SoC */
+ "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
+ "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+
+- reg: physical base address and length of the FIMD registers set.
+
+- interrupt-parent: should be the phandle of the fimd controller's
+ parent interrupt controller.
+
+- interrupts: should contain a list of all FIMD IP block interrupts in the
+ order: FIFO Level, VSYNC, LCD_SYSTEM. The interrupt specifier
+ format depends on the interrupt controller used.
+
+- interrupt-names: should contain the interrupt names: "fifo", "vsync",
+ "lcd_sys", in the same order as they were listed in the interrupts
+ property.
+
+- pinctrl-0: pin control group to be used for this controller.
+
+- pinctrl-names: must contain a "default" entry.
+
+- clocks: must include clock specifiers corresponding to entries in the
+ clock-names property.
+
+- clock-names: list of clock names sorted in the same order as the clocks
+ property. Must contain "sclk_fimd" and "fimd".
+
+Optional Properties:
+- samsung,power-domain: a phandle to FIMD power domain node.
+
+Example:
+
+SoC specific DT entry:
+
+ fimd@11c00000 {
+ compatible = "samsung,exynos4210-fimd";
+ interrupt-parent = <&combiner>;
+ reg = <0x11c00000 0x20000>;
+ interrupt-names = "fifo", "vsync", "lcd_sys";
+ interrupts = <11 0>, <11 1>, <11 2>;
+ clocks = <&clock 140>, <&clock 283>;
+ clock-names = "sclk_fimd", "fimd";
+ samsung,power-domain = <&pd_lcd0>;
+ status = "disabled";
+ };
+
+Board specific DT entry:
+
+ fimd@11c00000 {
+ pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>;
+ pinctrl-names = "default";
+ status = "okay";
+ };