path: root/Documentation/dvb
diff options
authorLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-30 22:57:33 -0300
committerLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-31 11:26:23 -0300
commit25985edcedea6396277003854657b5f3cb31a628 (patch)
treef026e810210a2ee7290caeb737c23cb6472b7c38 /Documentation/dvb
parent6aba74f2791287ec407e0f92487a725a25908067 (diff)
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'Documentation/dvb')
3 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb
index c8238e44ed6b..c4d963a67d6f 100644
--- a/Documentation/dvb/README.dvb-usb
+++ b/Documentation/dvb/README.dvb-usb
@@ -138,7 +138,7 @@ Hotplug is able to load the driver, when it is needed (because you plugged
in the device).
If you want to enable debug output, you have to load the driver manually and
-from withing the dvb-kernel cvs repository.
+from within the dvb-kernel cvs repository.
first have a look, which debug level are available:
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
index 4a0c2b56e690..6c3bda50f7dc 100644
--- a/Documentation/dvb/ci.txt
+++ b/Documentation/dvb/ci.txt
@@ -47,7 +47,7 @@ so on.
* CI modules that are supported
-The CI module support is largely dependant upon the firmware on the cards
+The CI module support is largely dependent upon the firmware on the cards
Some cards do support almost all of the available CI modules. There is
nothing much that can be done in order to make additional CI modules
working with these cards.
diff --git a/Documentation/dvb/faq.txt b/Documentation/dvb/faq.txt
index 121832e5d899..97b1373f2428 100644
--- a/Documentation/dvb/faq.txt
+++ b/Documentation/dvb/faq.txt
@@ -106,7 +106,7 @@ Some very frequently asked questions about linuxtv-dvb
5. The dvb_net device doesn't give me any packets at all
Run tcpdump on the dvb0_0 interface. This sets the interface
- into promiscous mode so it accepts any packets from the PID
+ into promiscuous mode so it accepts any packets from the PID
you have configured with the dvbnet utility. Check if there
are any packets with the IP addr and MAC addr you have
configured with ifconfig.