Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC driver updates from Kevin Hilman:
 "Some of these are for drivers/soc, where we're now putting
  SoC-specific drivers these days.  Some are for other driver subsystems
  where we have received acks from the appropriate maintainers.

  Some highlights:

   - simple-mfd: document DT bindings and misc updates
   - migrate mach-berlin to simple-mfd for clock, pinctrl and reset
   - memory: support for Tegra132 SoC
   - memory: introduce tegra EMC driver for scaling memory frequency
   - misc. updates for ARM CCI and CCN busses"

* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (48 commits)
  drivers: soc: sunxi: Introduce SoC driver to map SRAMs
  arm-cci: Add aliases for PMU events
  arm-cci: Add CCI-500 PMU support
  arm-cci: Sanitise CCI400 PMU driver specific code
  arm-cci: Abstract handling for CCI events
  arm-cci: Abstract out the PMU counter details
  arm-cci: Cleanup PMU driver code
  arm-cci: Do not enable CCI-400 PMU by default
  firmware: qcom: scm: Add HDCP Support
  ARM: berlin: add an ADC node for the BG2Q
  ARM: berlin: remove useless chip and system ctrl compatibles
  clk: berlin: drop direct of_iomap of nodes reg property
  ARM: berlin: move BG2Q clock node
  ARM: berlin: move BG2CD clock node
  ARM: berlin: move BG2 clock node
  clk: berlin: prepare simple-mfd conversion
  pinctrl: berlin: drop SoC stub provided regmap
  ARM: berlin: move pinctrl to simple-mfd nodes
  pinctrl: berlin: prepare to use regmap provided by syscon
  reset: berlin: drop arch_initcall initialization
  ...

6 files changed, 574 insertions, 3 deletions

diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index 3c5c631328d3..aef1d200a9b2 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -31,8 +31,9 @@ specific to ARM.
 	- compatible
 		Usage: required
 		Value type: <string>
-		Definition: must be set to
+		Definition: must contain one of the following:
 			    "arm,cci-400"
+			    "arm,cci-500"
 
 	- reg
 		Usage: required
@@ -99,6 +100,7 @@ specific to ARM.
 				 "arm,cci-400-pmu,r1"
 				 "arm,cci-400-pmu"  - DEPRECATED, permitted only where OS has
 						      secure acces to CCI registers
+				 "arm,cci-500-pmu,r0"
 		- reg:
 			Usage: required
 			Value type: Integer cells. A register entry, expressed
diff --git a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
index f3db93c85eea..3338a2834ad7 100644
--- a/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
+++ b/Documentation/devicetree/bindings/memory-controllers/nvidia,tegra-mc.txt
@@ -1,6 +1,9 @@
 NVIDIA Tegra Memory Controller device tree bindings
 ===================================================
 
+memory-controller node
+----------------------
+
 Required properties:
 - compatible: Should be "nvidia,tegra<chip>-mc"
 - reg: Physical base address and length of the controller's registers.
@@ -15,9 +18,49 @@ Required properties:
 This device implements an IOMMU that complies with the generic IOMMU binding.
 See ../iommu/iommu.txt for details.
 
-Example:
---------
+emc-timings subnode
+-------------------
+
+The node should contain a "emc-timings" subnode for each supported RAM type (see field RAM_CODE in
+register PMC_STRAPPING_OPT_A).
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is used for.
+
+timing subnode
+--------------
+
+Each "emc-timings" node should contain a subnode for every supported EMC clock rate.
+
+Required properties for timing nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- nvidia,emem-configuration : Values to be written to the EMEM register block. For the Tegra124 SoC
+(see section "15.6.1 MC Registers" in the TRM), these are the registers whose values need to be
+specified, according to the board documentation:
+
+	MC_EMEM_ARB_CFG
+	MC_EMEM_ARB_OUTSTANDING_REQ
+	MC_EMEM_ARB_TIMING_RCD
+	MC_EMEM_ARB_TIMING_RP
+	MC_EMEM_ARB_TIMING_RC
+	MC_EMEM_ARB_TIMING_RAS
+	MC_EMEM_ARB_TIMING_FAW
+	MC_EMEM_ARB_TIMING_RRD
+	MC_EMEM_ARB_TIMING_RAP2PRE
+	MC_EMEM_ARB_TIMING_WAP2PRE
+	MC_EMEM_ARB_TIMING_R2R
+	MC_EMEM_ARB_TIMING_W2W
+	MC_EMEM_ARB_TIMING_R2W
+	MC_EMEM_ARB_TIMING_W2R
+	MC_EMEM_ARB_DA_TURNS
+	MC_EMEM_ARB_DA_COVERS
+	MC_EMEM_ARB_MISC0
+	MC_EMEM_ARB_MISC1
+	MC_EMEM_ARB_RING1_THROTTLE
 
+Example SoC include file:
+
+/ {
 	mc: memory-controller@0,70019000 {
 		compatible = "nvidia,tegra124-mc";
 		reg = <0x0 0x70019000 0x0 0x1000>;
@@ -34,3 +77,40 @@ Example:
 		...
 		iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
 	};
+};
+
+Example board file:
+
+/ {
+	memory-controller@0,70019000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emem-configuration = <
+					0x40040001 /* MC_EMEM_ARB_CFG */
+					0x8000000a /* MC_EMEM_ARB_OUTSTANDING_REQ */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RCD */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RP */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RC */
+					0x00000000 /* MC_EMEM_ARB_TIMING_RAS */
+					0x00000002 /* MC_EMEM_ARB_TIMING_FAW */
+					0x00000001 /* MC_EMEM_ARB_TIMING_RRD */
+					0x00000002 /* MC_EMEM_ARB_TIMING_RAP2PRE */
+					0x00000008 /* MC_EMEM_ARB_TIMING_WAP2PRE */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2R */
+					0x00000002 /* MC_EMEM_ARB_TIMING_W2W */
+					0x00000003 /* MC_EMEM_ARB_TIMING_R2W */
+					0x00000006 /* MC_EMEM_ARB_TIMING_W2R */
+					0x06030203 /* MC_EMEM_ARB_DA_TURNS */
+					0x000a0402 /* MC_EMEM_ARB_DA_COVERS */
+					0x77e30303 /* MC_EMEM_ARB_MISC0 */
+					0x70000f03 /* MC_EMEM_ARB_MISC1 */
+					0x001f0000 /* MC_EMEM_ARB_RING1_THROTTLE */
+				>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
new file mode 100644
index 000000000000..b59c625d6336
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/tegra-emc.txt
@@ -0,0 +1,374 @@
+NVIDIA Tegra124 SoC EMC (external memory controller)
+====================================================
+
+Required properties :
+- compatible : Should be "nvidia,tegra124-emc".
+- reg : physical base address and length of the controller's registers.
+- nvidia,memory-controller : phandle of the MC driver.
+
+The node should contain a "emc-timings" subnode for each supported RAM type
+(see field RAM_CODE in register PMC_STRAPPING_OPT_A), with its unit address
+being its RAM_CODE.
+
+Required properties for "emc-timings" nodes :
+- nvidia,ram-code : Should contain the value of RAM_CODE this timing set is
+used for.
+
+Each "emc-timings" node should contain a "timing" subnode for every supported
+EMC clock rate. The "timing" subnodes should have the clock rate in Hz as
+their unit address.
+
+Required properties for "timing" nodes :
+- clock-frequency : Should contain the memory clock rate in Hz.
+- The following properties contain EMC timing characterization values
+(specified in the board documentation) :
+  - nvidia,emc-auto-cal-config : EMC_AUTO_CAL_CONFIG
+  - nvidia,emc-auto-cal-config2 : EMC_AUTO_CAL_CONFIG2
+  - nvidia,emc-auto-cal-config3 : EMC_AUTO_CAL_CONFIG3
+  - nvidia,emc-auto-cal-interval : EMC_AUTO_CAL_INTERVAL
+  - nvidia,emc-bgbias-ctl0 : EMC_BGBIAS_CTL0
+  - nvidia,emc-cfg : EMC_CFG
+  - nvidia,emc-cfg-2 : EMC_CFG_2
+  - nvidia,emc-ctt-term-ctrl : EMC_CTT_TERM_CTRL
+  - nvidia,emc-mode-1 : Mode Register 1
+  - nvidia,emc-mode-2 : Mode Register 2
+  - nvidia,emc-mode-4 : Mode Register 4
+  - nvidia,emc-mode-reset : Mode Register 0
+  - nvidia,emc-mrs-wait-cnt : EMC_MRS_WAIT_CNT
+  - nvidia,emc-sel-dpd-ctrl : EMC_SEL_DPD_CTRL
+  - nvidia,emc-xm2dqspadctrl2 : EMC_XM2DQSPADCTRL2
+  - nvidia,emc-zcal-cnt-long : EMC_ZCAL_WAIT_CNT after clock change
+  - nvidia,emc-zcal-interval : EMC_ZCAL_INTERVAL
+- nvidia,emc-configuration : EMC timing characterization data. These are the
+registers (see section "15.6.2 EMC Registers" in the TRM) whose values need to
+be specified, according to the board documentation:
+
+	EMC_RC
+	EMC_RFC
+	EMC_RFC_SLR
+	EMC_RAS
+	EMC_RP
+	EMC_R2W
+	EMC_W2R
+	EMC_R2P
+	EMC_W2P
+	EMC_RD_RCD
+	EMC_WR_RCD
+	EMC_RRD
+	EMC_REXT
+	EMC_WEXT
+	EMC_WDV
+	EMC_WDV_MASK
+	EMC_QUSE
+	EMC_QUSE_WIDTH
+	EMC_IBDLY
+	EMC_EINPUT
+	EMC_EINPUT_DURATION
+	EMC_PUTERM_EXTRA
+	EMC_PUTERM_WIDTH
+	EMC_PUTERM_ADJ
+	EMC_CDB_CNTL_1
+	EMC_CDB_CNTL_2
+	EMC_CDB_CNTL_3
+	EMC_QRST
+	EMC_QSAFE
+	EMC_RDV
+	EMC_RDV_MASK
+	EMC_REFRESH
+	EMC_BURST_REFRESH_NUM
+	EMC_PRE_REFRESH_REQ_CNT
+	EMC_PDEX2WR
+	EMC_PDEX2RD
+	EMC_PCHG2PDEN
+	EMC_ACT2PDEN
+	EMC_AR2PDEN
+	EMC_RW2PDEN
+	EMC_TXSR
+	EMC_TXSRDLL
+	EMC_TCKE
+	EMC_TCKESR
+	EMC_TPD
+	EMC_TFAW
+	EMC_TRPAB
+	EMC_TCLKSTABLE
+	EMC_TCLKSTOP
+	EMC_TREFBW
+	EMC_FBIO_CFG6
+	EMC_ODT_WRITE
+	EMC_ODT_READ
+	EMC_FBIO_CFG5
+	EMC_CFG_DIG_DLL
+	EMC_CFG_DIG_DLL_PERIOD
+	EMC_DLL_XFORM_DQS0
+	EMC_DLL_XFORM_DQS1
+	EMC_DLL_XFORM_DQS2
+	EMC_DLL_XFORM_DQS3
+	EMC_DLL_XFORM_DQS4
+	EMC_DLL_XFORM_DQS5
+	EMC_DLL_XFORM_DQS6
+	EMC_DLL_XFORM_DQS7
+	EMC_DLL_XFORM_DQS8
+	EMC_DLL_XFORM_DQS9
+	EMC_DLL_XFORM_DQS10
+	EMC_DLL_XFORM_DQS11
+	EMC_DLL_XFORM_DQS12
+	EMC_DLL_XFORM_DQS13
+	EMC_DLL_XFORM_DQS14
+	EMC_DLL_XFORM_DQS15
+	EMC_DLL_XFORM_QUSE0
+	EMC_DLL_XFORM_QUSE1
+	EMC_DLL_XFORM_QUSE2
+	EMC_DLL_XFORM_QUSE3
+	EMC_DLL_XFORM_QUSE4
+	EMC_DLL_XFORM_QUSE5
+	EMC_DLL_XFORM_QUSE6
+	EMC_DLL_XFORM_QUSE7
+	EMC_DLL_XFORM_ADDR0
+	EMC_DLL_XFORM_ADDR1
+	EMC_DLL_XFORM_ADDR2
+	EMC_DLL_XFORM_ADDR3
+	EMC_DLL_XFORM_ADDR4
+	EMC_DLL_XFORM_ADDR5
+	EMC_DLL_XFORM_QUSE8
+	EMC_DLL_XFORM_QUSE9
+	EMC_DLL_XFORM_QUSE10
+	EMC_DLL_XFORM_QUSE11
+	EMC_DLL_XFORM_QUSE12
+	EMC_DLL_XFORM_QUSE13
+	EMC_DLL_XFORM_QUSE14
+	EMC_DLL_XFORM_QUSE15
+	EMC_DLI_TRIM_TXDQS0
+	EMC_DLI_TRIM_TXDQS1
+	EMC_DLI_TRIM_TXDQS2
+	EMC_DLI_TRIM_TXDQS3
+	EMC_DLI_TRIM_TXDQS4
+	EMC_DLI_TRIM_TXDQS5
+	EMC_DLI_TRIM_TXDQS6
+	EMC_DLI_TRIM_TXDQS7
+	EMC_DLI_TRIM_TXDQS8
+	EMC_DLI_TRIM_TXDQS9
+	EMC_DLI_TRIM_TXDQS10
+	EMC_DLI_TRIM_TXDQS11
+	EMC_DLI_TRIM_TXDQS12
+	EMC_DLI_TRIM_TXDQS13
+	EMC_DLI_TRIM_TXDQS14
+	EMC_DLI_TRIM_TXDQS15
+	EMC_DLL_XFORM_DQ0
+	EMC_DLL_XFORM_DQ1
+	EMC_DLL_XFORM_DQ2
+	EMC_DLL_XFORM_DQ3
+	EMC_DLL_XFORM_DQ4
+	EMC_DLL_XFORM_DQ5
+	EMC_DLL_XFORM_DQ6
+	EMC_DLL_XFORM_DQ7
+	EMC_XM2CMDPADCTRL
+	EMC_XM2CMDPADCTRL4
+	EMC_XM2CMDPADCTRL5
+	EMC_XM2DQPADCTRL2
+	EMC_XM2DQPADCTRL3
+	EMC_XM2CLKPADCTRL
+	EMC_XM2CLKPADCTRL2
+	EMC_XM2COMPPADCTRL
+	EMC_XM2VTTGENPADCTRL
+	EMC_XM2VTTGENPADCTRL2
+	EMC_XM2VTTGENPADCTRL3
+	EMC_XM2DQSPADCTRL3
+	EMC_XM2DQSPADCTRL4
+	EMC_XM2DQSPADCTRL5
+	EMC_XM2DQSPADCTRL6
+	EMC_DSR_VTTGEN_DRV
+	EMC_TXDSRVTTGEN
+	EMC_FBIO_SPARE
+	EMC_ZCAL_WAIT_CNT
+	EMC_MRS_WAIT_CNT2
+	EMC_CTT
+	EMC_CTT_DURATION
+	EMC_CFG_PIPE
+	EMC_DYN_SELF_REF_CONTROL
+	EMC_QPOP
+
+Example SoC include file:
+
+/ {
+	emc@0,7001b000 {
+		compatible = "nvidia,tegra124-emc";
+		reg = <0x0 0x7001b000 0x0 0x1000>;
+
+		nvidia,memory-controller = <&mc>;
+	};
+};
+
+Example board file:
+
+/ {
+	emc@0,7001b000 {
+		emc-timings-3 {
+			nvidia,ram-code = <3>;
+
+			timing-12750000 {
+				clock-frequency = <12750000>;
+
+				nvidia,emc-zcal-cnt-long = <0x00000042>;
+				nvidia,emc-auto-cal-interval = <0x001fffff>;
+				nvidia,emc-ctt-term-ctrl = <0x00000802>;
+				nvidia,emc-cfg = <0x73240000>;
+				nvidia,emc-cfg-2 = <0x000008c5>;
+				nvidia,emc-sel-dpd-ctrl = <0x00040128>;
+				nvidia,emc-bgbias-ctl0 = <0x00000008>;
+				nvidia,emc-auto-cal-config = <0xa1430000>;
+				nvidia,emc-auto-cal-config2 = <0x00000000>;
+				nvidia,emc-auto-cal-config3 = <0x00000000>;
+				nvidia,emc-mode-reset = <0x80001221>;
+				nvidia,emc-mode-1 = <0x80100003>;
+				nvidia,emc-mode-2 = <0x80200008>;
+				nvidia,emc-mode-4 = <0x00000000>;
+
+				nvidia,emc-configuration = <
+					0x00000000 /* EMC_RC */
+					0x00000003 /* EMC_RFC */
+					0x00000000 /* EMC_RFC_SLR */
+					0x00000000 /* EMC_RAS */
+					0x00000000 /* EMC_RP */
+					0x00000004 /* EMC_R2W */
+					0x0000000a /* EMC_W2R */
+					0x00000003 /* EMC_R2P */
+					0x0000000b /* EMC_W2P */
+					0x00000000 /* EMC_RD_RCD */
+					0x00000000 /* EMC_WR_RCD */
+					0x00000003 /* EMC_RRD */
+					0x00000003 /* EMC_REXT */
+					0x00000000 /* EMC_WEXT */
+					0x00000006 /* EMC_WDV */
+					0x00000006 /* EMC_WDV_MASK */
+					0x00000006 /* EMC_QUSE */
+					0x00000002 /* EMC_QUSE_WIDTH */
+					0x00000000 /* EMC_IBDLY */
+					0x00000005 /* EMC_EINPUT */
+					0x00000005 /* EMC_EINPUT_DURATION */
+					0x00010000 /* EMC_PUTERM_EXTRA */
+					0x00000003 /* EMC_PUTERM_WIDTH */
+					0x00000000 /* EMC_PUTERM_ADJ */
+					0x00000000 /* EMC_CDB_CNTL_1 */
+					0x00000000 /* EMC_CDB_CNTL_2 */
+					0x00000000 /* EMC_CDB_CNTL_3 */
+					0x00000004 /* EMC_QRST */
+					0x0000000c /* EMC_QSAFE */
+					0x0000000d /* EMC_RDV */
+					0x0000000f /* EMC_RDV_MASK */
+					0x00000060 /* EMC_REFRESH */
+					0x00000000 /* EMC_BURST_REFRESH_NUM */
+					0x00000018 /* EMC_PRE_REFRESH_REQ_CNT */
+					0x00000002 /* EMC_PDEX2WR */
+					0x00000002 /* EMC_PDEX2RD */
+					0x00000001 /* EMC_PCHG2PDEN */
+					0x00000000 /* EMC_ACT2PDEN */
+					0x00000007 /* EMC_AR2PDEN */
+					0x0000000f /* EMC_RW2PDEN */
+					0x00000005 /* EMC_TXSR */
+					0x00000005 /* EMC_TXSRDLL */
+					0x00000004 /* EMC_TCKE */
+					0x00000005 /* EMC_TCKESR */
+					0x00000004 /* EMC_TPD */
+					0x00000000 /* EMC_TFAW */
+					0x00000000 /* EMC_TRPAB */
+					0x00000005 /* EMC_TCLKSTABLE */
+					0x00000005 /* EMC_TCLKSTOP */
+					0x00000064 /* EMC_TREFBW */
+					0x00000000 /* EMC_FBIO_CFG6 */
+					0x00000000 /* EMC_ODT_WRITE */
+					0x00000000 /* EMC_ODT_READ */
+					0x106aa298 /* EMC_FBIO_CFG5 */
+					0x002c00a0 /* EMC_CFG_DIG_DLL */
+					0x00008000 /* EMC_CFG_DIG_DLL_PERIOD */
+					0x00064000 /* EMC_DLL_XFORM_DQS0 */
+					0x00064000 /* EMC_DLL_XFORM_DQS1 */
+					0x00064000 /* EMC_DLL_XFORM_DQS2 */
+					0x00064000 /* EMC_DLL_XFORM_DQS3 */
+					0x00064000 /* EMC_DLL_XFORM_DQS4 */
+					0x00064000 /* EMC_DLL_XFORM_DQS5 */
+					0x00064000 /* EMC_DLL_XFORM_DQS6 */
+					0x00064000 /* EMC_DLL_XFORM_DQS7 */
+					0x00064000 /* EMC_DLL_XFORM_DQS8 */
+					0x00064000 /* EMC_DLL_XFORM_DQS9 */
+					0x00064000 /* EMC_DLL_XFORM_DQS10 */
+					0x00064000 /* EMC_DLL_XFORM_DQS11 */
+					0x00064000 /* EMC_DLL_XFORM_DQS12 */
+					0x00064000 /* EMC_DLL_XFORM_DQS13 */
+					0x00064000 /* EMC_DLL_XFORM_DQS14 */
+					0x00064000 /* EMC_DLL_XFORM_DQS15 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE0 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE1 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE2 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE3 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE4 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE6 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE7 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR0 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR1 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR2 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR3 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR4 */
+					0x00000000 /* EMC_DLL_XFORM_ADDR5 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE8 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE9 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE10 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE11 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE12 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE13 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE14 */
+					0x00000000 /* EMC_DLL_XFORM_QUSE15 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS0 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS1 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS2 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS3 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS4 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS5 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS6 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS7 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS8 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS9 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS10 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS11 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS12 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS13 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS14 */
+					0x00000000 /* EMC_DLI_TRIM_TXDQS15 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ0 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ1 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ2 */
+					0x000fc000 /* EMC_DLL_XFORM_DQ3 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ4 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ5 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ6 */
+					0x0000fc00 /* EMC_DLL_XFORM_DQ7 */
+					0x10000280 /* EMC_XM2CMDPADCTRL */
+					0x00000000 /* EMC_XM2CMDPADCTRL4 */
+					0x00111111 /* EMC_XM2CMDPADCTRL5 */
+					0x00000000 /* EMC_XM2DQPADCTRL2 */
+					0x00000000 /* EMC_XM2DQPADCTRL3 */
+					0x77ffc081 /* EMC_XM2CLKPADCTRL */
+					0x00000e0e /* EMC_XM2CLKPADCTRL2 */
+					0x81f1f108 /* EMC_XM2COMPPADCTRL */
+					0x07070004 /* EMC_XM2VTTGENPADCTRL */
+					0x0000003f /* EMC_XM2VTTGENPADCTRL2 */
+					0x016eeeee /* EMC_XM2VTTGENPADCTRL3 */
+					0x51451400 /* EMC_XM2DQSPADCTRL3 */
+					0x00514514 /* EMC_XM2DQSPADCTRL4 */
+					0x00514514 /* EMC_XM2DQSPADCTRL5 */
+					0x51451400 /* EMC_XM2DQSPADCTRL6 */
+					0x0000003f /* EMC_DSR_VTTGEN_DRV */
+					0x00000007 /* EMC_TXDSRVTTGEN */
+					0x00000000 /* EMC_FBIO_SPARE */
+					0x00000042 /* EMC_ZCAL_WAIT_CNT */
+					0x000e000e /* EMC_MRS_WAIT_CNT2 */
+					0x00000000 /* EMC_CTT */
+					0x00000003 /* EMC_CTT_DURATION */
+					0x0000f2f3 /* EMC_CFG_PIPE */
+					0x800001c5 /* EMC_DYN_SELF_REF_CONTROL */
+					0x0000000a /* EMC_QPOP */
+				>;
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/mfd/mfd.txt b/Documentation/devicetree/bindings/mfd/mfd.txt
new file mode 100644
index 000000000000..af9d6931a1a2
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mfd.txt
@@ -0,0 +1,41 @@
+Multi-Function Devices (MFD)
+
+These devices comprise a nexus for heterogeneous hardware blocks containing
+more than one non-unique yet varying hardware functionality.
+
+A typical MFD can be:
+
+- A mixed signal ASIC on an external bus, sometimes a PMIC (Power Management
+  Integrated Circuit) that is manufactured in a lower technology node (rough
+  silicon) that handles analog drivers for things like audio amplifiers, LED
+  drivers, level shifters, PHY (physical interfaces to things like USB or
+  ethernet), regulators etc.
+
+- A range of memory registers containing "miscellaneous system registers" also
+  known as a system controller "syscon" or any other memory range containing a
+  mix of unrelated hardware devices.
+
+Optional properties:
+
+- compatible : "simple-mfd" - this signifies that the operating system should
+  consider all subnodes of the MFD device as separate devices akin to how
+  "simple-bus" inidicates when to see subnodes as children for a simple
+  memory-mapped bus. For more complex devices, when the nexus driver has to
+  probe registers to figure out what child devices exist etc, this should not
+  be used. In the latter case the child devices will be determined by the
+  operating system.
+
+Example:
+
+foo@1000 {
+	compatible = "syscon", "simple-mfd";
+	reg = <0x01000 0x1000>;
+
+	led@08.0 {
+		compatible = "register-bit-led";
+		offset = <0x08>;
+		mask = <0x01>;
+		label = "myled";
+		default-state = "on";
+	};
+};
diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
index 47b205cc9cc7..4556359c5876 100644
--- a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
+++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt
@@ -10,3 +10,5 @@ Required properties:
        The second entry gives the physical address and length of the
        registers indicating the strapping options.
 
+Optional properties:
+- nvidia,long-ram-code: If present, the RAM code is long (4 bit). If not, short (2 bit).
diff --git a/Documentation/devicetree/bindings/soc/sunxi/sram.txt b/Documentation/devicetree/bindings/soc/sunxi/sram.txt
new file mode 100644
index 000000000000..067698112f5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/sunxi/sram.txt
@@ -0,0 +1,72 @@
+Allwinnner SoC SRAM controllers
+-----------------------------------------------------
+
+The SRAM controller found on most Allwinner devices is represented by
+a regular node for the SRAM controller itself, with sub-nodes
+reprensenting the SRAM handled by the SRAM controller.
+
+Controller Node
+---------------
+
+Required properties:
+- compatible : "allwinner,sun4i-a10-sram-controller"
+- reg : sram controller register offset + length
+
+SRAM nodes
+----------
+
+Each SRAM is described using the mmio-sram bindings documented in
+Documentation/devicetree/bindings/misc/sram.txt
+
+Each SRAM will have SRAM sections that are going to be handled by the
+SRAM controller as subnodes. These sections are represented following
+once again the representation described in the mmio-sram binding.
+
+The valid sections compatible are:
+    - allwinner,sun4i-a10-sram-a3-a4
+    - allwinner,sun4i-a10-sram-d
+
+Devices using SRAM sections
+---------------------------
+
+Some devices need to request to the SRAM controller to map an SRAM for
+their exclusive use.
+
+The relationship between such a device and an SRAM section is
+expressed through the allwinner,sram property, that will take a
+phandle and an argument.
+
+This valid values for this argument are:
+  - 0: CPU
+  - 1: Device
+
+Example
+-------
+sram-controller@01c00000 {
+	compatible = "allwinner,sun4i-a10-sram-controller";
+	reg = <0x01c00000 0x30>;
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	sram_a: sram@00000000 {
+		compatible = "mmio-sram";
+		reg = <0x00000000 0xc000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0 0x00000000 0xc000>;
+
+		emac_sram: sram-section@8000 {
+			compatible = "allwinner,sun4i-a10-sram-a3-a4";
+			reg = <0x8000 0x4000>;
+			status = "disabled";
+		};
+	};
+};
+
+emac: ethernet@01c0b000 {
+	compatible = "allwinner,sun4i-a10-emac";
+	...
+
+	allwinner,sram = <&emac_sram 1>;
+};