aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorGreg Kroah-Hartman <gregkh@suse.de>2008-08-14 09:37:34 -0700
committerGreg Kroah-Hartman <gregkh@suse.de>2008-10-17 14:41:08 -0700
commitaa82661baf8a48379355ffa8bf162b07cf487600 (patch)
tree22b555a5227c2d6f3a145d5a5350b2b473602262
parent1817b1692a2eab022e805d32e910f4556c89dce8 (diff)
downloadlinux-linaro-stable-aa82661baf8a48379355ffa8bf162b07cf487600.tar.gz
USB: remove warn() macro from usb media drivers
USB should not be having it's own printk macros, so remove warn() and use the system-wide standard of dev_warn() wherever possible. In the few places that will not work out, use a basic printk(). Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
-rw-r--r--drivers/media/radio/dsbr100.c13
-rw-r--r--drivers/media/video/dabusb.c4
-rw-r--r--drivers/media/video/ov511.c19
-rw-r--r--drivers/media/video/usbvideo/konicawc.c8
-rw-r--r--drivers/media/video/usbvideo/quickcam_messenger.c14
5 files changed, 35 insertions, 23 deletions
diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c
index 66783fffe4c1..78f56944e640 100644
--- a/drivers/media/radio/dsbr100.c
+++ b/drivers/media/radio/dsbr100.c
@@ -310,7 +310,7 @@ static int vidioc_s_frequency(struct file *file, void *priv,
radio->curfreq = f->frequency;
if (dsbr100_setfreq(radio, radio->curfreq)==-1)
- warn("Set frequency failed");
+ dev_warn(&radio->usbdev->dev, "Set frequency failed\n");
return 0;
}
@@ -361,12 +361,14 @@ static int vidioc_s_ctrl(struct file *file, void *priv,
case V4L2_CID_AUDIO_MUTE:
if (ctrl->value) {
if (dsbr100_stop(radio) == -1) {
- warn("Radio did not respond properly");
+ dev_warn(&radio->usbdev->dev,
+ "Radio did not respond properly\n");
return -EBUSY;
}
} else {
if (dsbr100_start(radio) == -1) {
- warn("Radio did not respond properly");
+ dev_warn(&radio->usbdev->dev,
+ "Radio did not respond properly\n");
return -EBUSY;
}
}
@@ -416,7 +418,8 @@ static int usb_dsbr100_open(struct inode *inode, struct file *file)
radio->muted = 1;
if (dsbr100_start(radio)<0) {
- warn("Radio did not start up properly");
+ dev_warn(&radio->usbdev->dev,
+ "Radio did not start up properly\n");
radio->users = 0;
unlock_kernel();
return -EIO;
@@ -501,7 +504,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf,
radio->curfreq = FREQ_MIN*FREQ_MUL;
video_set_drvdata(radio->videodev, radio);
if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) {
- warn("Could not register video device");
+ dev_warn(&intf->dev, "Could not register video device\n");
video_device_release(radio->videodev);
kfree(radio->transfer_buffer);
kfree(radio);
diff --git a/drivers/media/video/dabusb.c b/drivers/media/video/dabusb.c
index 3aa538afcc0b..298810d5262b 100644
--- a/drivers/media/video/dabusb.c
+++ b/drivers/media/video/dabusb.c
@@ -192,7 +192,7 @@ static void dabusb_iso_complete (struct urb *purb)
err("dabusb_iso_complete: invalid len %d", len);
}
else
- warn("dabusb_iso_complete: corrupted packet status: %d", purb->iso_frame_desc[i].status);
+ dev_warn(&purb->dev->dev, "dabusb_iso_complete: corrupted packet status: %d\n", purb->iso_frame_desc[i].status);
if (dst != purb->actual_length)
err("dst!=purb->actual_length:%d!=%d", dst, purb->actual_length);
}
@@ -289,7 +289,7 @@ static int dabusb_bulk (pdabusb_t s, pbulk_transfer_t pb)
}
if( ret == -EPIPE ) {
- warn("CLEAR_FEATURE request to remove STALL condition.");
+ dev_warn(&s->usbdev->dev, "CLEAR_FEATURE request to remove STALL condition.\n");
if(usb_clear_halt(s->usbdev, usb_pipeendpoint(pipe)))
err("request failed");
}
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 935d73de57bd..210f1240b331 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -1098,9 +1098,10 @@ ov51x_clear_snapshot(struct usb_ov511 *ov)
reg_w(ov, R51x_SYS_SNAP, 0x02);
reg_w(ov, R51x_SYS_SNAP, 0x00);
} else if (ov->bclass == BCL_OV518) {
- warn("snapshot reset not supported yet on OV518(+)");
+ dev_warn(&ov->dev->dev,
+ "snapshot reset not supported yet on OV518(+)\n");
} else {
- err("clear snap: invalid bridge type");
+ dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
}
}
@@ -1115,14 +1116,16 @@ ov51x_check_snapshot(struct usb_ov511 *ov)
if (ov->bclass == BCL_OV511) {
ret = reg_r(ov, R51x_SYS_SNAP);
if (ret < 0) {
- err("Error checking snspshot status (%d)", ret);
+ dev_err(&ov->dev->dev,
+ "Error checking snspshot status (%d)\n", ret);
} else if (ret & 0x08) {
status = 1;
}
} else if (ov->bclass == BCL_OV518) {
- warn("snapshot check not supported yet on OV518(+)");
+ dev_warn(&ov->dev->dev,
+ "snapshot check not supported yet on OV518(+)\n");
} else {
- err("check snap: invalid bridge type");
+ dev_err(&ov->dev->dev, "clear snap: invalid bridge type\n");
}
return status;
@@ -5217,7 +5220,8 @@ saa7111a_configure(struct usb_ov511 *ov)
if (ov->bclass == BCL_OV511)
reg_w(ov, 0x11, 0x00);
else
- warn("SAA7111A not yet supported with OV518/OV518+");
+ dev_warn(&ov->dev->dev,
+ "SAA7111A not yet supported with OV518/OV518+\n");
return 0;
}
@@ -5456,7 +5460,8 @@ ov518_configure(struct usb_ov511 *ov)
* required. OV518 has no uncompressed mode, to save RAM. */
if (!dumppix && !ov->compress) {
ov->compress = 1;
- warn("Compression required with OV518...enabling");
+ dev_warn(&ov->dev->dev,
+ "Compression required with OV518...enabling\n");
}
if (ov->bridge == BRG_OV518) {
diff --git a/drivers/media/video/usbvideo/konicawc.c b/drivers/media/video/usbvideo/konicawc.c
index e986c28b7bb0..da27a5287983 100644
--- a/drivers/media/video/usbvideo/konicawc.c
+++ b/drivers/media/video/usbvideo/konicawc.c
@@ -229,7 +229,8 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
- warn("Not enough memory for camera's input device\n");
+ dev_warn(&dev->dev,
+ "Not enough memory for camera's input device\n");
return;
}
@@ -243,8 +244,9 @@ static void konicawc_register_input(struct konicawc *cam, struct usb_device *dev
error = input_register_device(cam->input);
if (error) {
- warn("Failed to register camera's input device, err: %d\n",
- error);
+ dev_warn(&dev->dev,
+ "Failed to register camera's input device, err: %d\n",
+ error);
input_free_device(cam->input);
cam->input = NULL;
}
diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c
index 05c61b523115..4459b8a7f818 100644
--- a/drivers/media/video/usbvideo/quickcam_messenger.c
+++ b/drivers/media/video/usbvideo/quickcam_messenger.c
@@ -93,7 +93,7 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
cam->input = input_dev = input_allocate_device();
if (!input_dev) {
- warn("insufficient mem for cam input device");
+ dev_warn(&dev->dev, "insufficient mem for cam input device\n");
return;
}
@@ -107,8 +107,9 @@ static void qcm_register_input(struct qcm *cam, struct usb_device *dev)
error = input_register_device(cam->input);
if (error) {
- warn("Failed to register camera's input device, err: %d\n",
- error);
+ dev_warn(&dev->dev,
+ "Failed to register camera's input device, err: %d\n",
+ error);
input_free_device(cam->input);
cam->input = NULL;
}
@@ -587,8 +588,9 @@ static int qcm_compress_iso(struct uvd *uvd, struct urb *dataurb)
dataurb->iso_frame_desc[i].offset;
if (st < 0) {
- warn("Data error: packet=%d. len=%d. status=%d.",
- i, n, st);
+ dev_warn(&uvd->dev->dev,
+ "Data error: packet=%d. len=%d. status=%d.\n",
+ i, n, st);
uvd->stats.iso_err_count++;
continue;
}
@@ -699,7 +701,7 @@ static void qcm_stop_data(struct uvd *uvd)
ret = qcm_camera_off(uvd);
if (ret)
- warn("couldn't turn the cam off.");
+ dev_warn(&uvd->dev->dev, "couldn't turn the cam off.\n");
uvd->streaming = 0;