diff options
| author | Alexey Brodkin <Alexey.Brodkin@synopsys.com> | 2017-08-01 12:58:47 +0300 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-08-30 10:19:22 +0200 |
| commit | 10814c149eeb7f604e2ec7cff51b42267beffb38 (patch) | |
| tree | 6f6ac2788e70eeda42b0697d912c40392d58d622 | |
| parent | 6b1c81dd7fdbfe2f855454d0329c70222deb29d4 (diff) | |
ARCv2: PAE40: Explicitly set MSB counterpart of SLC region ops addresses
commit 7d79cee2c6540ea64dd917a14e2fd63d4ac3d3c0 upstream.
It is necessary to explicitly set both SLC_AUX_RGN_START1 and SLC_AUX_RGN_END1
which hold MSB bits of the physical address correspondingly of region start
and end otherwise SLC region operation is executed in unpredictable manner
Without this patch, SLC flushes on HSDK (IOC disabled) were taking
seconds.
Reported-by: Vladimir Kondratiev <vladimir.kondratiev@intel.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
[vgupta: PAR40 regs only written if PAE40 exist]
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
| -rw-r--r-- | arch/arc/include/asm/cache.h | 2 | ||||
| -rw-r--r-- | arch/arc/mm/cache.c | 13 |
2 files changed, 13 insertions, 2 deletions
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h index 210ef3e72332..0ddd7144c492 100644 --- a/arch/arc/include/asm/cache.h +++ b/arch/arc/include/asm/cache.h @@ -88,7 +88,9 @@ extern int ioc_exists; #define ARC_REG_SLC_FLUSH 0x904 #define ARC_REG_SLC_INVALIDATE 0x905 #define ARC_REG_SLC_RGN_START 0x914 +#define ARC_REG_SLC_RGN_START1 0x915 #define ARC_REG_SLC_RGN_END 0x916 +#define ARC_REG_SLC_RGN_END1 0x917 /* Bit val in SLC_CONTROL */ #define SLC_CTRL_IM 0x040 diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c index d81b6d7e11e7..9a84cbdd44b0 100644 --- a/arch/arc/mm/cache.c +++ b/arch/arc/mm/cache.c @@ -543,6 +543,7 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) static DEFINE_SPINLOCK(lock); unsigned long flags; unsigned int ctrl; + phys_addr_t end; spin_lock_irqsave(&lock, flags); @@ -572,8 +573,16 @@ noinline void slc_op(phys_addr_t paddr, unsigned long sz, const int op) * END needs to be setup before START (latter triggers the operation) * END can't be same as START, so add (l2_line_sz - 1) to sz */ - write_aux_reg(ARC_REG_SLC_RGN_END, (paddr + sz + l2_line_sz - 1)); - write_aux_reg(ARC_REG_SLC_RGN_START, paddr); + end = paddr + sz + l2_line_sz - 1; + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_END1, upper_32_bits(end)); + + write_aux_reg(ARC_REG_SLC_RGN_END, lower_32_bits(end)); + + if (is_pae40_enabled()) + write_aux_reg(ARC_REG_SLC_RGN_START1, upper_32_bits(paddr)); + + write_aux_reg(ARC_REG_SLC_RGN_START, lower_32_bits(paddr)); while (read_aux_reg(ARC_REG_SLC_CTRL) & SLC_CTRL_BUSY); |