aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorJavier Martinez Canillas <javier.martinez@collabora.co.uk>2013-06-24 17:13:23 +0200
committerTony Lindgren <tony@atomide.com>2013-06-25 23:13:40 -0700
commit397eada946712b90e0620c378b366bcc6c98c9f6 (patch)
tree5a53948117108e915b462addc84afdae4d647768
parent9e895ace5d82df8929b16f58e9f515f6d54ab82d (diff)
downloadlinux-linaro-stable-397eada946712b90e0620c378b366bcc6c98c9f6.tar.gz
gpio/omap: don't use linear domain mapping for OMAP1
Commit ede4d7a5 ("gpio/omap: convert gpio irq domain to linear mapping") converted the OMAP GPIO driver to use a linear mapping for the GPIO IRQ domain instead of using a legacy mapping. Not using a legacy mapping has a number of benefits but it requires the platform to support SPARSE_IRQ which currently is not supported on OMAP1. So this change caused a regression on OMAP1 platforms [1]. Since this issue is not present on all OMAP2+ platforms, there is no need to revert the driver to use legacy domain mapping for all the platforms. [1]: http://www.mail-archive.com/linux-omap@vger.kernel.org/msg89005.html Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Tony Lindgren <tony@atomide.com>
-rw-r--r--drivers/gpio/gpio-omap.c22
1 files changed, 21 insertions, 1 deletions
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index d3f7d2db870f..4a430360af5a 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1094,6 +1094,9 @@ static int omap_gpio_probe(struct platform_device *pdev)
const struct omap_gpio_platform_data *pdata;
struct resource *res;
struct gpio_bank *bank;
+#ifdef CONFIG_ARCH_OMAP1
+ int irq_base;
+#endif
match = of_match_device(of_match_ptr(omap_gpio_match), dev);
@@ -1135,11 +1138,28 @@ static int omap_gpio_probe(struct platform_device *pdev)
pdata->get_context_loss_count;
}
+#ifdef CONFIG_ARCH_OMAP1
+ /*
+ * REVISIT: Once we have OMAP1 supporting SPARSE_IRQ, we can drop
+ * irq_alloc_descs() and irq_domain_add_legacy() and just use a
+ * linear IRQ domain mapping for all OMAP platforms.
+ */
+ irq_base = irq_alloc_descs(-1, 0, bank->width, 0);
+ if (irq_base < 0) {
+ dev_err(dev, "Couldn't allocate IRQ numbers\n");
+ return -ENODEV;
+ }
+ bank->domain = irq_domain_add_legacy(node, bank->width, irq_base,
+ 0, &irq_domain_simple_ops, NULL);
+#else
bank->domain = irq_domain_add_linear(node, bank->width,
&irq_domain_simple_ops, NULL);
- if (!bank->domain)
+#endif
+ if (!bank->domain) {
+ dev_err(dev, "Couldn't register an IRQ domain\n");
return -ENODEV;
+ }
if (bank->regs->set_dataout && bank->regs->clr_dataout)
bank->set_dataout = _set_gpio_dataout_reg;