Merge commit 'v3.0.12' into linaro-3.0HEADmaster

59 files changed, 477 insertions, 166 deletions

diff --git a/Makefile b/Makefile
index 36036d13433..993fe0563e4 100644
--- a/Makefile
+++ b/Makefile
@@ -1,6 +1,6 @@
 VERSION = 3
 PATCHLEVEL = 0
-SUBLEVEL = 10
+SUBLEVEL = 12
 EXTRAVERSION =
 NAME = Sneaky Weasel
 
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 742b6108a00..fed957a6ff3 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -356,7 +356,7 @@ __secondary_data:
  *  r13 = *virtual* address to jump to upon completion
  */
 __enable_mmu:
-#ifdef CONFIG_ALIGNMENT_TRAP
+#if defined(CONFIG_ALIGNMENT_TRAP) && __LINUX_ARM_ARCH__ < 6
 	orr	r0, r0, #CR_A
 #else
 	bic	r0, r0, #CR_A
diff --git a/drivers/base/core.c b/drivers/base/core.c
index bc8729d603a..78445f40c43 100644
--- a/drivers/base/core.c
+++ b/drivers/base/core.c
@@ -22,6 +22,7 @@
 #include <linux/kallsyms.h>
 #include <linux/mutex.h>
 #include <linux/async.h>
+#include <linux/pm_runtime.h>
 
 #include "base.h"
 #include "power/power.h"
@@ -1742,6 +1743,8 @@ void device_shutdown(void)
 		 */
 		list_del_init(&dev->kobj.entry);
 		spin_unlock(&devices_kset->list_lock);
+		/* Disable all device's runtime power management */
+		pm_runtime_disable(dev);
 
 		if (dev->bus && dev->bus->shutdown) {
 			dev_dbg(dev, "shutdown\n");
diff --git a/drivers/base/node.c b/drivers/base/node.c
index 793f796c4da..5693ecee9a4 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -127,12 +127,13 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       nid, K(node_page_state(nid, NR_WRITEBACK)),
 		       nid, K(node_page_state(nid, NR_FILE_PAGES)),
 		       nid, K(node_page_state(nid, NR_FILE_MAPPED)),
-		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)
 			+ node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR
+			HPAGE_PMD_NR),
+#else
+		       nid, K(node_page_state(nid, NR_ANON_PAGES)),
 #endif
-		       ),
 		       nid, K(node_page_state(nid, NR_SHMEM)),
 		       nid, node_page_state(nid, NR_KERNEL_STACK) *
 				THREAD_SIZE / 1024,
@@ -143,13 +144,14 @@ static ssize_t node_read_meminfo(struct sys_device * dev,
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE) +
 				node_page_state(nid, NR_SLAB_UNRECLAIMABLE)),
 		       nid, K(node_page_state(nid, NR_SLAB_RECLAIMABLE)),
-		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE))
 			, nid,
 			K(node_page_state(nid, NR_ANON_TRANSPARENT_HUGEPAGES) *
-			HPAGE_PMD_NR)
+			HPAGE_PMD_NR));
+#else
+		       nid, K(node_page_state(nid, NR_SLAB_UNRECLAIMABLE)));
 #endif
-		       );
 	n += hugetlb_report_node_meminfo(nid, buf + n);
 	return n;
 }
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index ce7914c4c04..e0d0e278f62 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -541,6 +541,7 @@ typedef struct drm_i915_private {
 	u32 savePIPEB_LINK_M1;
 	u32 savePIPEB_LINK_N1;
 	u32 saveMCHBAR_RENDER_STANDBY;
+	u32 savePCH_PORT_HOTPLUG;
 
 	struct {
 		/** Bridge to intel-gtt-ko */
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 5d5def756c9..8936d40d225 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -2544,10 +2544,18 @@
 #define _CURBBASE		0x700c4
 #define _CURBPOS			0x700c8
 
+#define _CURBCNTR_IVB		0x71080
+#define _CURBBASE_IVB		0x71084
+#define _CURBPOS_IVB		0x71088
+
 #define CURCNTR(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR)
 #define CURBASE(pipe) _PIPE(pipe, _CURABASE, _CURBBASE)
 #define CURPOS(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS)
 
+#define CURCNTR_IVB(pipe) _PIPE(pipe, _CURACNTR, _CURBCNTR_IVB)
+#define CURBASE_IVB(pipe) _PIPE(pipe, _CURABASE, _CURBBASE_IVB)
+#define CURPOS_IVB(pipe) _PIPE(pipe, _CURAPOS, _CURBPOS_IVB)
+
 /* Display A control */
 #define _DSPACNTR                0x70180
 #define   DISPLAY_PLANE_ENABLE			(1<<31)
@@ -3133,6 +3141,7 @@
 #define  FDI_LINK_TRAIN_NONE_IVB            (3<<8)
 
 /* both Tx and Rx */
+#define  FDI_COMPOSITE_SYNC		(1<<11)
 #define  FDI_LINK_TRAIN_AUTO		(1<<10)
 #define  FDI_SCRAMBLING_ENABLE          (0<<7)
 #define  FDI_SCRAMBLING_DISABLE         (1<<7)
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index 5257cfc34c3..27693c05c6d 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -814,6 +814,7 @@ int i915_save_state(struct drm_device *dev)
 		dev_priv->saveFDI_RXB_IMR = I915_READ(_FDI_RXB_IMR);
 		dev_priv->saveMCHBAR_RENDER_STANDBY =
 			I915_READ(RSTDBYCTL);
+		dev_priv->savePCH_PORT_HOTPLUG = I915_READ(PCH_PORT_HOTPLUG);
 	} else {
 		dev_priv->saveIER = I915_READ(IER);
 		dev_priv->saveIMR = I915_READ(IMR);
@@ -865,6 +866,7 @@ int i915_restore_state(struct drm_device *dev)
 		I915_WRITE(GTIMR, dev_priv->saveGTIMR);
 		I915_WRITE(_FDI_RXA_IMR, dev_priv->saveFDI_RXA_IMR);
 		I915_WRITE(_FDI_RXB_IMR, dev_priv->saveFDI_RXB_IMR);
+		I915_WRITE(PCH_PORT_HOTPLUG, dev_priv->savePCH_PORT_HOTPLUG);
 	} else {
 		I915_WRITE(IER, dev_priv->saveIER);
 		I915_WRITE(IMR, dev_priv->saveIMR);
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index cbf4c4ce3a2..853bddb96ea 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2340,6 +2340,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 	temp |= FDI_LINK_TRAIN_PATTERN_1_IVB;
 	temp &= ~FDI_LINK_TRAIN_VOL_EMP_MASK;
 	temp |= FDI_LINK_TRAIN_400MV_0DB_SNB_B;
+	temp |= FDI_COMPOSITE_SYNC;
 	I915_WRITE(reg, temp | FDI_TX_ENABLE);
 
 	reg = FDI_RX_CTL(pipe);
@@ -2347,6 +2348,7 @@ static void ivb_manual_fdi_link_train(struct drm_crtc *crtc)
 	temp &= ~FDI_LINK_TRAIN_AUTO;
 	temp &= ~FDI_LINK_TRAIN_PATTERN_MASK_CPT;
 	temp |= FDI_LINK_TRAIN_PATTERN_1_CPT;
+	temp |= FDI_COMPOSITE_SYNC;
 	I915_WRITE(reg, temp | FDI_RX_ENABLE);
 
 	POSTING_READ(reg);
@@ -5334,6 +5336,31 @@ static void i9xx_update_cursor(struct drm_crtc *crtc, u32 base)
 	I915_WRITE(CURBASE(pipe), base);
 }
 
+static void ivb_update_cursor(struct drm_crtc *crtc, u32 base)
+{
+	struct drm_device *dev = crtc->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
+	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+	int pipe = intel_crtc->pipe;
+	bool visible = base != 0;
+
+	if (intel_crtc->cursor_visible != visible) {
+		uint32_t cntl = I915_READ(CURCNTR_IVB(pipe));
+		if (base) {
+			cntl &= ~CURSOR_MODE;
+			cntl |= CURSOR_MODE_64_ARGB_AX | MCURSOR_GAMMA_ENABLE;
+		} else {
+			cntl &= ~(CURSOR_MODE | MCURSOR_GAMMA_ENABLE);
+			cntl |= CURSOR_MODE_DISABLE;
+		}
+		I915_WRITE(CURCNTR_IVB(pipe), cntl);
+
+		intel_crtc->cursor_visible = visible;
+	}
+	/* and commit changes on next vblank */
+	I915_WRITE(CURBASE_IVB(pipe), base);
+}
+
 /* If no-part of the cursor is visible on the framebuffer, then the GPU may hang... */
 static void intel_crtc_update_cursor(struct drm_crtc *crtc,
 				     bool on)
@@ -5381,11 +5408,16 @@ static void intel_crtc_update_cursor(struct drm_crtc *crtc,
 	if (!visible && !intel_crtc->cursor_visible)
 		return;
 
-	I915_WRITE(CURPOS(pipe), pos);
-	if (IS_845G(dev) || IS_I865G(dev))
-		i845_update_cursor(crtc, base);
-	else
-		i9xx_update_cursor(crtc, base);
+	if (IS_IVYBRIDGE(dev)) {
+		I915_WRITE(CURPOS_IVB(pipe), pos);
+		ivb_update_cursor(crtc, base);
+	} else {
+		I915_WRITE(CURPOS(pipe), pos);
+		if (IS_845G(dev) || IS_I865G(dev))
+			i845_update_cursor(crtc, base);
+		else
+			i9xx_update_cursor(crtc, base);
+	}
 
 	if (visible)
 		intel_mark_busy(dev, to_intel_framebuffer(crtc->fb)->obj);
diff --git a/drivers/media/video/saa7164/saa7164-cards.c b/drivers/media/video/saa7164/saa7164-cards.c
index 69822a4e727..c71369173fa 100644
--- a/drivers/media/video/saa7164/saa7164-cards.c
+++ b/drivers/media/video/saa7164/saa7164-cards.c
@@ -203,6 +203,66 @@ struct saa7164_board saa7164_boards[] = {
 			.i2c_reg_len	= REGLEN_8bit,
 		} },
 	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+		.portc		= SAA7164_MPEG_ENCODER,
+		.portd		= SAA7164_MPEG_ENCODER,
+		.porte		= SAA7164_MPEG_VBI,
+		.portf		= SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
 	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
 		.name		= "Hauppauge WinTV-HVR2250",
 		.porta		= SAA7164_MPEG_DVB,
@@ -426,6 +486,10 @@ struct saa7164_subid saa7164_subids[] = {
 		.subvendor = 0x0070,
 		.subdevice = 0x8851,
 		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8940,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
 	},
 };
 const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -469,6 +533,7 @@ void saa7164_gpio_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -549,6 +614,7 @@ void saa7164_card_setup(struct saa7164_dev *dev)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
diff --git a/drivers/media/video/saa7164/saa7164-dvb.c b/drivers/media/video/saa7164/saa7164-dvb.c
index f65eab63ca8..d3779379197 100644
--- a/drivers/media/video/saa7164/saa7164-dvb.c
+++ b/drivers/media/video/saa7164/saa7164-dvb.c
@@ -475,6 +475,7 @@ int saa7164_dvb_register(struct saa7164_port *port)
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
 		i2c_bus = &dev->i2c_bus[port->nr + 1];
 		switch (port->nr) {
 		case 0:
diff --git a/drivers/media/video/saa7164/saa7164.h b/drivers/media/video/saa7164/saa7164.h
index 16745d2fb34..13bd27e9bd1 100644
--- a/drivers/media/video/saa7164/saa7164.h
+++ b/drivers/media/video/saa7164/saa7164.h
@@ -83,6 +83,7 @@
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3	6
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2	7
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3	8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4	9
 
 #define SAA7164_MAX_UNITS		8
 #define SAA7164_TS_NUMBER_OF_LINES	312
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 3546474428f..56c05efa027 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -471,7 +471,7 @@ config BMP085
 	  module will be called bmp085.
 
 config PCH_PHUB
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) PHUB"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) PHUB"
 	depends on PCI
 	help
 	  This driver is for PCH(Platform controller Hub) PHUB(Packet Hub) of
@@ -479,12 +479,13 @@ config PCH_PHUB
 	  processor. The Topcliff has MAC address and Option ROM data in SROM.
 	  This driver can access MAC address and Option ROM data in SROM.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor's IOH,
+	  ML7213/ML7223/ML7831.
+	  ML7213 which is for IVI(In-Vehicle Infotainment) use.
+	  ML7223 IOH is for MP(Media Phone) use.
+	  ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 	  To compile this driver as a module, choose M here: the module will
 	  be called pch_phub.
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 5fe79df4483..97e1a1f18a9 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -73,6 +73,9 @@
 #define PCI_DEVICE_ID_ROHM_ML7223_mPHUB	0x8012 /* for Bus-m */
 #define PCI_DEVICE_ID_ROHM_ML7223_nPHUB	0x8002 /* for Bus-n */
 
+/* Macros for ML7831 */
+#define PCI_DEVICE_ID_ROHM_ML7831_PHUB 0x8801
+
 /* SROM ACCESS Macro */
 #define PCH_WORD_ADDR_MASK (~((1 << 2) - 1))
 
@@ -464,7 +467,7 @@ static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
 	int retval;
 	int i;
 
-	if (chip->ioh_type == 1) /* EG20T */
+	if ((chip->ioh_type == 1) || (chip->ioh_type == 5)) /* EG20T or ML7831*/
 		retval = pch_phub_gbe_serial_rom_conf(chip);
 	else	/* ML7223 */
 		retval = pch_phub_gbe_serial_rom_conf_mp(chip);
@@ -754,6 +757,22 @@ static int __devinit pch_phub_probe(struct pci_dev *pdev,
 		chip->pch_opt_rom_start_address =\
 						 PCH_PHUB_ROM_START_ADDR_ML7223;
 		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_ML7223;
+	} else if (id->driver_data == 5) { /* ML7831 */
+		retval = sysfs_create_file(&pdev->dev.kobj,
+					   &dev_attr_pch_mac.attr);
+		if (retval)
+			goto err_sysfs_create;
+
+		retval = sysfs_create_bin_file(&pdev->dev.kobj, &pch_bin_attr);
+		if (retval)
+			goto exit_bin_attr;
+
+		/* set the prefech value */
+		iowrite32(0x000affaa, chip->pch_phub_base_address + 0x14);
+		/* set the interrupt delay value */
+		iowrite32(0x25, chip->pch_phub_base_address + 0x44);
+		chip->pch_opt_rom_start_address = PCH_PHUB_ROM_START_ADDR_EG20T;
+		chip->pch_mac_start_address = PCH_PHUB_MAC_START_ADDR_EG20T;
 	}
 
 	chip->ioh_type = id->driver_data;
@@ -838,6 +857,7 @@ static struct pci_device_id pch_phub_pcidev_id[] = {
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7213_PHUB), 2,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_mPHUB), 3,  },
 	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7223_nPHUB), 4,  },
+	{ PCI_VDEVICE(ROHM, PCI_DEVICE_ID_ROHM_ML7831_PHUB), 5,  },
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
diff --git a/drivers/misc/spear13xx_pcie_gadget.c b/drivers/misc/spear13xx_pcie_gadget.c
index cfbddbef11d..43d073bc1d9 100644
--- a/drivers/misc/spear13xx_pcie_gadget.c
+++ b/drivers/misc/spear13xx_pcie_gadget.c
@@ -903,6 +903,6 @@ static void __exit spear_pcie_gadget_exit(void)
 }
 module_exit(spear_pcie_gadget_exit);
 
-MODULE_ALIAS("pcie-gadget-spear");
+MODULE_ALIAS("platform:pcie-gadget-spear");
 MODULE_AUTHOR("Pratyush Anand");
 MODULE_LICENSE("GPL");
diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c
index 463352c890d..db39742db3a 100644
--- a/drivers/net/wireless/libertas/if_spi.c
+++ b/drivers/net/wireless/libertas/if_spi.c
@@ -997,6 +997,7 @@ static int if_spi_host_to_card(struct lbs_private *priv,
 		spin_unlock_irqrestore(&card->buffer_lock, flags);
 		break;
 	default:
+		kfree(packet);
 		netdev_err(priv->dev, "can't transfer buffer of type %d\n",
 			   type);
 		err = -EINVAL;
diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h
index c446db69bd3..8c822113b08 100644
--- a/drivers/net/wireless/rt2x00/rt2x00.h
+++ b/drivers/net/wireless/rt2x00/rt2x00.h
@@ -922,6 +922,7 @@ struct rt2x00_dev {
 	 * Powersaving work
 	 */
 	struct delayed_work autowakeup_work;
+	struct work_struct sleep_work;
 
 	/*
 	 * Data queue arrays for RX, TX, Beacon and ATIM.
diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c
index 939821b4af2..dffaa8f45f1 100644
--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
+++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
@@ -449,6 +449,23 @@ static u8 *rt2x00lib_find_ie(u8 *data, unsigned int len, u8 ie)
 	return NULL;
 }
 
+static void rt2x00lib_sleep(struct work_struct *work)
+{
+	struct rt2x00_dev *rt2x00dev =
+	    container_of(work, struct rt2x00_dev, sleep_work);
+
+	if (!test_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Check again is powersaving is enabled, to prevent races from delayed
+	 * work execution.
+	 */
+	if (!test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
+		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
+				 IEEE80211_CONF_CHANGE_PS);
+}
+
 static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
 				      struct sk_buff *skb,
 				      struct rxdone_entry_desc *rxdesc)
@@ -496,8 +513,7 @@ static void rt2x00lib_rxdone_check_ps(struct rt2x00_dev *rt2x00dev,
 	cam |= (tim_ie->bitmap_ctrl & 0x01);
 
 	if (!cam && !test_bit(CONFIG_POWERSAVING, &rt2x00dev->flags))
-		rt2x00lib_config(rt2x00dev, &rt2x00dev->hw->conf,
-				 IEEE80211_CONF_CHANGE_PS);
+		queue_work(rt2x00dev->workqueue, &rt2x00dev->sleep_work);
 }
 
 static int rt2x00lib_rxdone_read_signal(struct rt2x00_dev *rt2x00dev,
@@ -1108,6 +1124,7 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev)
 
 	INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled);
 	INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup);
+	INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep);
 
 	/*
 	 * Let the driver probe the device to detect the capabilities.
@@ -1164,6 +1181,7 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev)
 	 */
 	cancel_work_sync(&rt2x00dev->intf_work);
 	cancel_delayed_work_sync(&rt2x00dev->autowakeup_work);
+	cancel_work_sync(&rt2x00dev->sleep_work);
 	if (rt2x00_is_usb(rt2x00dev)) {
 		del_timer_sync(&rt2x00dev->txstatus_timer);
 		cancel_work_sync(&rt2x00dev->rxdone_work);
diff --git a/drivers/scsi/aacraid/linit.c b/drivers/scsi/aacraid/linit.c
index 3382475dc22..c7b6fed8873 100644
--- a/drivers/scsi/aacraid/linit.c
+++ b/drivers/scsi/aacraid/linit.c
@@ -38,6 +38,7 @@
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/slab.h>
 #include <linux/mutex.h>
 #include <linux/spinlock.h>
@@ -1108,6 +1109,9 @@ static int __devinit aac_probe_one(struct pci_dev *pdev,
 		unique_id++;
 	}
 
+	pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+			       PCIE_LINK_STATE_CLKPM);
+
 	error = pci_enable_device(pdev);
 	if (error)
 		goto out;
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 6689d5d4d40..56a9f3f676e 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -23,6 +23,7 @@
 #include <linux/interrupt.h>
 #include <linux/types.h>
 #include <linux/pci.h>
+#include <linux/pci-aspm.h>
 #include <linux/kernel.h>
 #include <linux/slab.h>
 #include <linux/delay.h>
@@ -3887,6 +3888,10 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
 		dev_warn(&h->pdev->dev, "controller appears to be disabled\n");
 		return -ENODEV;
 	}
+
+	pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
+			       PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);
+
 	err = pci_enable_device(h->pdev);
 	if (err) {
 		dev_warn(&h->pdev->dev, "unable to enable PCI device\n");
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 72273a0e566..b3c6d957fbd 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -319,11 +319,7 @@ static struct scsi_device *scsi_alloc_sdev(struct scsi_target *starget,
 	return sdev;
 
 out_device_destroy:
-	scsi_device_set_state(sdev, SDEV_DEL);
-	transport_destroy_device(&sdev->sdev_gendev);
-	put_device(&sdev->sdev_dev);
-	scsi_free_queue(sdev->request_queue);
-	put_device(&sdev->sdev_gendev);
+	__scsi_remove_device(sdev);
 out:
 	if (display_failure_msg)
 		printk(ALLOC_FAILURE_MSG, __func__);
diff --git a/drivers/tty/hvc/hvc_dcc.c b/drivers/tty/hvc/hvc_dcc.c
index 435f6facbc2..44fbebab507 100644
--- a/drivers/tty/hvc/hvc_dcc.c
+++ b/drivers/tty/hvc/hvc_dcc.c
@@ -46,6 +46,7 @@ static inline char __dcc_getchar(void)
 
 	asm volatile("mrc p14, 0, %0, c0, c5, 0	@ read comms data reg"
 		: "=r" (__c));
+	isb();
 
 	return __c;
 }
@@ -55,6 +56,7 @@ static inline void __dcc_putchar(char c)
 	asm volatile("mcr p14, 0, %0, c0, c5, 0	@ write a char"
 		: /* no output register */
 		: "r" (c));
+	isb();
 }
 
 static int hvc_dcc_put_chars(uint32_t vt, const char *buf, int count)
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index b3692e6e3c1..9789293a844 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -1585,7 +1585,7 @@ config SERIAL_IFX6X60
 	  Support for the IFX6x60 modem devices on Intel MID platforms.
 
 config SERIAL_PCH_UART
-	tristate "Intel EG20T PCH / OKI SEMICONDUCTOR IOH(ML7213/ML7223) UART"
+	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) UART"
 	depends on PCI
 	select SERIAL_CORE
 	help
@@ -1593,12 +1593,12 @@ config SERIAL_PCH_UART
 	  which is an IOH(Input/Output Hub) for x86 embedded processor.
 	  Enabling PCH_DMA, this PCH UART works as DMA mode.
 
-	  This driver also can be used for OKI SEMICONDUCTOR IOH(Input/
-	  Output Hub), ML7213 and ML7223.
-	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use and ML7223 IOH is
-	  for MP(Media Phone) use.
-	  ML7213/ML7223 is companion chip for Intel Atom E6xx series.
-	  ML7213/ML7223 is completely compatible for Intel EG20T PCH.
+	  This driver also can be used for LAPIS Semiconductor IOH(Input/
+	  Output Hub), ML7213, ML7223 and ML7831.
+	  ML7213 IOH is for IVI(In-Vehicle Infotainment) use, ML7223 IOH is
+	  for MP(Media Phone) use and ML7831 IOH is for general purpose use.
+	  ML7213/ML7223/ML7831 is companion chip for Intel Atom E6xx series.
+	  ML7213/ML7223/ML7831 is completely compatible for Intel EG20T PCH.
 
 config SERIAL_MSM_SMD
 	bool "Enable tty device interface for some SMD ports"
diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c
index 46521093089..902588b2a12 100644
--- a/drivers/tty/serial/pch_uart.c
+++ b/drivers/tty/serial/pch_uart.c
@@ -256,6 +256,8 @@ enum pch_uart_num_t {
 	pch_ml7213_uart2,
 	pch_ml7223_uart0,
 	pch_ml7223_uart1,
+	pch_ml7831_uart0,
+	pch_ml7831_uart1,
 };
 
 static struct pch_uart_driver_data drv_dat[] = {
@@ -268,6 +270,8 @@ static struct pch_uart_driver_data drv_dat[] = {
 	[pch_ml7213_uart2] = {PCH_UART_2LINE, 2},
 	[pch_ml7223_uart0] = {PCH_UART_8LINE, 0},
 	[pch_ml7223_uart1] = {PCH_UART_2LINE, 1},
+	[pch_ml7831_uart0] = {PCH_UART_8LINE, 0},
+	[pch_ml7831_uart1] = {PCH_UART_2LINE, 1},
 };
 
 static unsigned int default_baud = 9600;
@@ -625,6 +629,7 @@ static void pch_request_dma(struct uart_port *port)
 		dev_err(priv->port.dev, "%s:dma_request_channel FAILS(Rx)\n",
 			__func__);
 		dma_release_channel(priv->chan_tx);
+		priv->chan_tx = NULL;
 		return;
 	}
 
@@ -1212,8 +1217,7 @@ static void pch_uart_shutdown(struct uart_port *port)
 		dev_err(priv->port.dev,
 			"pch_uart_hal_set_fifo Failed(ret=%d)\n", ret);
 
-	if (priv->use_dma_flag)
-		pch_free_dma(port);
+	pch_free_dma(port);
 
 	free_irq(priv->port.irq, priv);
 }
@@ -1277,6 +1281,7 @@ static void pch_uart_set_termios(struct uart_port *port,
 	if (rtn)
 		goto out;
 
+	pch_uart_set_mctrl(&priv->port, priv->port.mctrl);
 	/* Don't rewrite B0 */
 	if (tty_termios_baud_rate(termios))
 		tty_termios_encode_baud_rate(termios, baud, baud);
@@ -1545,6 +1550,10 @@ static DEFINE_PCI_DEVICE_TABLE(pch_uart_pci_id) = {
 	 .driver_data = pch_ml7223_uart0},
 	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x800D),
 	 .driver_data = pch_ml7223_uart1},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8811),
+	 .driver_data = pch_ml7831_uart0},
+	{PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x8812),
+	 .driver_data = pch_ml7831_uart1},
 	{0,},
 };
 
diff --git a/drivers/tty/tty_ldisc.c b/drivers/tty/tty_ldisc.c
index ef925d58171..a76c808afad 100644
--- a/drivers/tty/tty_ldisc.c
+++ b/drivers/tty/tty_ldisc.c
@@ -36,6 +36,7 @@
 
 #include <linux/kmod.h>
 #include <linux/nsproxy.h>
+#include <linux/ratelimit.h>
 
 /*
  *	This guards the refcounted line discipline lists. The lock
@@ -548,15 +549,16 @@ static void tty_ldisc_flush_works(struct tty_struct *tty)
 /**
  *	tty_ldisc_wait_idle	-	wait for the ldisc to become idle
  *	@tty: tty to wait for
+ *	@timeout: for how long to wait at most
  *
  *	Wait for the line discipline to become idle. The discipline must
  *	have been halted for this to guarantee it remains idle.
  */
-static int tty_ldisc_wait_idle(struct tty_struct *tty)
+static int tty_ldisc_wait_idle(struct tty_struct *tty, long timeout)
 {
-	int ret;
+	long ret;
 	ret = wait_event_timeout(tty_ldisc_idle,
-			atomic_read(&tty->ldisc->users) == 1, 5 * HZ);
+			atomic_read(&tty->ldisc->users) == 1, timeout);
 	if (ret < 0)
 		return ret;
 	return ret > 0 ? 0 : -EBUSY;
@@ -666,7 +668,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc)
 
 	tty_ldisc_flush_works(tty);
 
-	retval = tty_ldisc_wait_idle(tty);
+	retval = tty_ldisc_wait_idle(tty, 5 * HZ);
 
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
@@ -763,8 +765,6 @@ static int tty_ldisc_reinit(struct tty_struct *tty, int ldisc)
 	if (IS_ERR(ld))
 		return -1;
 
-	WARN_ON_ONCE(tty_ldisc_wait_idle(tty));
-
 	tty_ldisc_close(tty, tty->ldisc);
 	tty_ldisc_put(tty->ldisc);
 	tty->ldisc = NULL;
@@ -839,7 +839,7 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	tty_unlock();
 	cancel_work_sync(&tty->buf.work);
 	mutex_unlock(&tty->ldisc_mutex);
-
+retry:
 	tty_lock();
 	mutex_lock(&tty->ldisc_mutex);
 
@@ -848,6 +848,22 @@ void tty_ldisc_hangup(struct tty_struct *tty)
 	   it means auditing a lot of other paths so this is
 	   a FIXME */
 	if (tty->ldisc) {	/* Not yet closed */
+		if (atomic_read(&tty->ldisc->users) != 1) {
+			char cur_n[TASK_COMM_LEN], tty_n[64];
+			long timeout = 3 * HZ;
+			tty_unlock();
+
+			while (tty_ldisc_wait_idle(tty, timeout) == -EBUSY) {
+				timeout = MAX_SCHEDULE_TIMEOUT;
+				printk_ratelimited(KERN_WARNING
+					"%s: waiting (%s) for %s took too long, but we keep waiting...\n",
+					__func__, get_task_comm(cur_n, current),
+					tty_name(tty, tty_n));
+			}
+			mutex_unlock(&tty->ldisc_mutex);
+			goto retry;
+		}
+
 		if (reset == 0) {
 
 			if (!tty_ldisc_reinit(tty, tty->termios->c_line))
diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c
index 5112f572677..2ffcaa0b0b7 100644
--- a/drivers/usb/class/cdc-acm.c
+++ b/drivers/usb/class/cdc-acm.c
@@ -539,7 +539,6 @@ static void acm_port_down(struct acm *acm)
 {
 	int i;
 
-	mutex_lock(&open_mutex);
 	if (acm->dev) {
 		usb_autopm_get_interface(acm->control);
 		acm_set_control(acm, acm->ctrlout = 0);
@@ -551,14 +550,15 @@ static void acm_port_down(struct acm *acm)
 		acm->control->needs_remote_wakeup = 0;
 		usb_autopm_put_interface(acm->control);
 	}
-	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_hangup(struct tty_struct *tty)
 {
 	struct acm *acm = tty->driver_data;
 	tty_port_hangup(&acm->port);
+	mutex_lock(&open_mutex);
 	acm_port_down(acm);
+	mutex_unlock(&open_mutex);
 }
 
 static void acm_tty_close(struct tty_struct *tty, struct file *filp)
@@ -569,8 +569,9 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 	   shutdown */
 	if (!acm)
 		return;
+
+	mutex_lock(&open_mutex);
 	if (tty_port_close_start(&acm->port, tty, filp) == 0) {
-		mutex_lock(&open_mutex);
 		if (!acm->dev) {
 			tty_port_tty_set(&acm->port, NULL);
 			acm_tty_unregister(acm);
@@ -582,6 +583,7 @@ static void acm_tty_close(struct tty_struct *tty, struct file *filp)
 	acm_port_down(acm);
 	tty_port_close_end(&acm->port, tty);
 	tty_port_tty_set(&acm->port, NULL);
+	mutex_unlock(&open_mutex);
 }
 
 static int acm_tty_write(struct tty_struct *tty,
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index a428aa080a3..210e3597091 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -813,6 +813,12 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type)
 					USB_PORT_FEAT_C_PORT_LINK_STATE);
 		}
 
+		if ((portchange & USB_PORT_STAT_C_BH_RESET) &&
+				hub_is_superspeed(hub->hdev)) {
+			need_debounce_delay = true;
+			clear_port_feature(hub->hdev, port1,
+					USB_PORT_FEAT_C_BH_PORT_RESET);
+		}
 		/* We can forget about a "removed" device when there's a
 		 * physical disconnect or the connect status changes.
 		 */
diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c
index d6a8d8269bf..ecf12e15a7e 100644
--- a/drivers/usb/core/quirks.c
+++ b/drivers/usb/core/quirks.c
@@ -50,15 +50,42 @@ static const struct usb_device_id usb_quirk_list[] = {
 	/* Logitech Webcam B/C500 */
 	{ USB_DEVICE(0x046d, 0x0807), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C600 */
+	{ USB_DEVICE(0x046d, 0x0808), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam Pro 9000 */
 	{ USB_DEVICE(0x046d, 0x0809), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C905 */
+	{ USB_DEVICE(0x046d, 0x080a), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C210 */
+	{ USB_DEVICE(0x046d, 0x0819), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C260 */
+	{ USB_DEVICE(0x046d, 0x081a), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C310 */
 	{ USB_DEVICE(0x046d, 0x081b), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Webcam C910 */
+	{ USB_DEVICE(0x046d, 0x0821), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Webcam C160 */
+	{ USB_DEVICE(0x046d, 0x0824), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Webcam C270 */
 	{ USB_DEVICE(0x046d, 0x0825), .driver_info = USB_QUIRK_RESET_RESUME },
 
+	/* Logitech Quickcam Pro 9000 */
+	{ USB_DEVICE(0x046d, 0x0990), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam E3500 */
+	{ USB_DEVICE(0x046d, 0x09a4), .driver_info = USB_QUIRK_RESET_RESUME },
+
+	/* Logitech Quickcam Vision Pro */
+	{ USB_DEVICE(0x046d, 0x09a6), .driver_info = USB_QUIRK_RESET_RESUME },
+
 	/* Logitech Harmony 700-series */
 	{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
 
diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
index 629a96813fd..a495d489918 100644
--- a/drivers/usb/host/pci-quirks.c
+++ b/drivers/usb/host/pci-quirks.c
@@ -626,7 +626,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 	void __iomem *base, *op_reg_base;
 	u32	hcc_params, cap, val;
 	u8	offset, cap_length;
-	int	wait_time, delta, count = 256/4;
+	int	wait_time, count = 256/4;
 
 	if (!mmio_resource_enabled(pdev, 0))
 		return;
@@ -672,11 +672,10 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev)
 		writel(val, op_reg_base + EHCI_USBCMD);
 
 		wait_time = 2000;
-		delta = 100;
 		do {
 			writel(0x3f, op_reg_base + EHCI_USBSTS);
-			udelay(delta);
-			wait_time -= delta;
+			udelay(100);
+			wait_time -= 100;
 			val = readl(op_reg_base + EHCI_USBSTS);
 			if ((val == ~(u32)0) || (val & EHCI_USBSTS_HALTED)) {
 				break;
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 104620b3764..ffeee575fd2 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -875,7 +875,6 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct xhci_slot_ctx    *slot_ctx;
-	struct xhci_input_control_ctx *ctrl_ctx;
 	u32			port_num;
 	struct usb_device *top_dev;
 
@@ -887,12 +886,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 		return -EINVAL;
 	}
 	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
 	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
-	/* 2) New slot context and endpoint 0 context are valid*/
-	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
-
 	/* 3) Only the control endpoint is valid - one endpoint context */
 	slot_ctx->dev_info |= cpu_to_le32(LAST_CTX(1) | (u32) udev->route);
 	switch (udev->speed) {
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index b20d2f7221c..b4b06910f68 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -819,23 +819,24 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	struct xhci_ring *ring;
 	struct xhci_td *cur_td;
 	int ret, i, j;
+	unsigned long flags;
 
 	ep = (struct xhci_virt_ep *) arg;
 	xhci = ep->xhci;
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 
 	ep->stop_cmds_pending--;
 	if (xhci->xhc_state & XHCI_STATE_DYING) {
 		xhci_dbg(xhci, "Stop EP timer ran, but another timer marked "
 				"xHCI as DYING, exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 	if (!(ep->stop_cmds_pending == 0 && (ep->ep_state & EP_HALT_PENDING))) {
 		xhci_dbg(xhci, "Stop EP timer ran, but no command pending, "
 				"exiting.\n");
-		spin_unlock(&xhci->lock);
+		spin_unlock_irqrestore(&xhci->lock, flags);
 		return;
 	}
 
@@ -847,11 +848,11 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 	xhci->xhc_state |= XHCI_STATE_DYING;
 	/* Disable interrupts from the host controller and start halting it */
 	xhci_quiesce(xhci);
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 
 	ret = xhci_halt(xhci);
 
-	spin_lock(&xhci->lock);
+	spin_lock_irqsave(&xhci->lock, flags);
 	if (ret < 0) {
 		/* This is bad; the host is not responding to commands and it's
 		 * not allowing itself to be halted.  At least interrupts are
@@ -899,7 +900,7 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg)
 			}
 		}
 	}
-	spin_unlock(&xhci->lock);
+	spin_unlock_irqrestore(&xhci->lock, flags);
 	xhci_dbg(xhci, "Calling usb_hc_died()\n");
 	usb_hc_died(xhci_to_hcd(xhci)->primary_hcd);
 	xhci_dbg(xhci, "xHCI host controller is dead.\n");
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index fb61e9d8e17..1f0e198a865 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -749,7 +749,7 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 	u32			command, temp = 0;
 	struct usb_hcd		*hcd = xhci_to_hcd(xhci);
 	struct usb_hcd		*secondary_hcd;
-	int			retval;
+	int			retval = 0;
 
 	/* Wait a bit if either of the roothubs need to settle from the
 	 * transition into bus suspend.
@@ -759,6 +759,9 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 				xhci->bus_state[1].next_statechange))
 		msleep(100);
 
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
+	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
+
 	spin_lock_irq(&xhci->lock);
 	if (xhci->quirks & XHCI_RESET_ON_RESUME)
 		hibernated = true;
@@ -828,20 +831,13 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated)
 			return retval;
 		xhci_dbg(xhci, "Start the primary HCD\n");
 		retval = xhci_run(hcd->primary_hcd);
-		if (retval)
-			goto failed_restart;
-
-		xhci_dbg(xhci, "Start the secondary HCD\n");
-		retval = xhci_run(secondary_hcd);
 		if (!retval) {
-			set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-			set_bit(HCD_FLAG_HW_ACCESSIBLE,
-					&xhci->shared_hcd->flags);
+			xhci_dbg(xhci, "Start the secondary HCD\n");
+			retval = xhci_run(secondary_hcd);
 		}
-failed_restart:
 		hcd->state = HC_STATE_SUSPENDED;
 		xhci->shared_hcd->state = HC_STATE_SUSPENDED;
-		return retval;
+		goto done;
 	}
 
 	/* step 4: set Run/Stop bit */
@@ -860,11 +856,14 @@ failed_restart:
 	 * Running endpoints by ringing their doorbells
 	 */
 
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
-	set_bit(HCD_FLAG_HW_ACCESSIBLE, &xhci->shared_hcd->flags);
-
 	spin_unlock_irq(&xhci->lock);
-	return 0;
+
+ done:
+	if (retval == 0) {
+		usb_hcd_resume_root_hub(hcd);
+		usb_hcd_resume_root_hub(xhci->shared_hcd);
+	}
+	return retval;
 }
 #endif	/* CONFIG_PM */
 
@@ -2875,6 +2874,10 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	/* Otherwise, update the control endpoint ring enqueue pointer. */
 	else
 		xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = cpu_to_le32(SLOT_FLAG | EP0_FLAG);
+	ctrl_ctx->drop_flags = 0;
+
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
 	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
@@ -2956,7 +2959,6 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	virt_dev->address = (le32_to_cpu(slot_ctx->dev_state) & DEV_ADDR_MASK)
 		+ 1;
 	/* Zero the input context control for later use */
-	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
 	ctrl_ctx->add_flags = 0;
 	ctrl_ctx->drop_flags = 0;
 
diff --git a/drivers/usb/serial/ark3116.c b/drivers/usb/serial/ark3116.c
index 5cdb9d91227..18e875b92e0 100644
--- a/drivers/usb/serial/ark3116.c
+++ b/drivers/usb/serial/ark3116.c
@@ -42,7 +42,7 @@ static int debug;
  * Version information
  */
 
-#define DRIVER_VERSION "v0.6"
+#define DRIVER_VERSION "v0.7"
 #define DRIVER_AUTHOR "Bart Hartgers <bart.hartgers+ark3116@gmail.com>"
 #define DRIVER_DESC "USB ARK3116 serial/IrDA driver"
 #define DRIVER_DEV_DESC "ARK3116 RS232/IrDA"
@@ -380,10 +380,6 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 		goto err_out;
 	}
 
-	/* setup termios */
-	if (tty)
-		ark3116_set_termios(tty, port, NULL);
-
 	/* remove any data still left: also clears error state */
 	ark3116_read_reg(serial, UART_RX, buf);
 
@@ -406,6 +402,10 @@ static int ark3116_open(struct tty_struct *tty, struct usb_serial_port *port)
 	/* enable DMA */
 	ark3116_write_reg(port->serial, UART_FCR, UART_FCR_DMA_SELECT);
 
+	/* setup termios */
+	if (tty)
+		ark3116_set_termios(tty, port, NULL);
+
 err_out:
 	kfree(buf);
 	return result;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1b51d43f1da..486769c0f35 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2080,13 +2080,19 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	cflag = termios->c_cflag;
 
-	/* FIXME -For this cut I don't care if the line is really changing or
-	   not  - so just do the change regardless  - should be able to
-	   compare old_termios and tty->termios */
+	if (old_termios->c_cflag == termios->c_cflag
+	    && old_termios->c_ispeed == termios->c_ispeed
+	    && old_termios->c_ospeed == termios->c_ospeed)
+		goto no_c_cflag_changes;
+
 	/* NOTE These routines can get interrupted by
 	   ftdi_sio_read_bulk_callback  - need to examine what this means -
 	   don't see any problems yet */
 
+	if ((old_termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)) ==
+	    (termios->c_cflag & (CSIZE|PARODD|PARENB|CMSPAR|CSTOPB)))
+		goto no_data_parity_stop_changes;
+
 	/* Set number of data bits, parity, stop bits */
 
 	urb_value = 0;
@@ -2127,6 +2133,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 	}
 
 	/* Now do the baudrate */
+no_data_parity_stop_changes:
 	if ((cflag & CBAUD) == B0) {
 		/* Disable flow control */
 		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
@@ -2154,6 +2161,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 
 	/* Set flow control */
 	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
+no_c_cflag_changes:
 	if (cflag & CRTSCTS) {
 		dbg("%s Setting to CRTSCTS flow control", __func__);
 		if (usb_control_msg(dev,
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 89ae1f65e1b..3a47cbe9fc5 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -156,6 +156,7 @@ static void option_instat_callback(struct urb *urb);
 #define HUAWEI_PRODUCT_K4511			0x14CC
 #define HUAWEI_PRODUCT_ETS1220			0x1803
 #define HUAWEI_PRODUCT_E353			0x1506
+#define HUAWEI_PRODUCT_E173S			0x1C05
 
 #define QUANTA_VENDOR_ID			0x0408
 #define QUANTA_PRODUCT_Q101			0xEA02
@@ -316,6 +317,9 @@ static void option_instat_callback(struct urb *urb);
 #define ZTE_PRODUCT_AC8710			0xfff1
 #define ZTE_PRODUCT_AC2726			0xfff5
 #define ZTE_PRODUCT_AC8710T			0xffff
+#define ZTE_PRODUCT_MC2718			0xffe8
+#define ZTE_PRODUCT_AD3812			0xffeb
+#define ZTE_PRODUCT_MC2716			0xffed
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -500,6 +504,18 @@ static const struct option_blacklist_info zte_k3765_z_blacklist = {
 	.reserved = BIT(4),
 };
 
+static const struct option_blacklist_info zte_ad3812_z_blacklist = {
+	.sendsetup = BIT(0) | BIT(1) | BIT(2),
+};
+
+static const struct option_blacklist_info zte_mc2718_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3) | BIT(4),
+};
+
+static const struct option_blacklist_info zte_mc2716_z_blacklist = {
+	.sendsetup = BIT(1) | BIT(2) | BIT(3),
+};
+
 static const struct option_blacklist_info huawei_cdc12_blacklist = {
 	.reserved = BIT(1) | BIT(2),
 };
@@ -622,6 +638,7 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E173S, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K4505, 0xff, 0xff, 0xff),
 		.driver_info = (kernel_ulong_t) &huawei_cdc12_blacklist },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_K3765, 0xff, 0xff, 0xff),
@@ -1043,6 +1060,12 @@ static const struct usb_device_id option_ids[] = {
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC2726, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710T, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2718, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2718_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AD3812, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff),
+	 .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 614fabc6a15..d44c669cc48 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -91,7 +91,6 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SONY_VENDOR_ID, SONY_QN3USB_PRODUCT_ID) },
 	{ USB_DEVICE(SANWA_VENDOR_ID, SANWA_PRODUCT_ID) },
 	{ USB_DEVICE(ADLINK_VENDOR_ID, ADLINK_ND6530_PRODUCT_ID) },
-	{ USB_DEVICE(WINCHIPHEAD_VENDOR_ID, WINCHIPHEAD_USBSER_PRODUCT_ID) },
 	{ USB_DEVICE(SMART_VENDOR_ID, SMART_PRODUCT_ID) },
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h
index 3d10d7f0207..c38b8c00c06 100644
--- a/drivers/usb/serial/pl2303.h
+++ b/drivers/usb/serial/pl2303.h
@@ -145,10 +145,6 @@
 #define ADLINK_VENDOR_ID		0x0b63
 #define ADLINK_ND6530_PRODUCT_ID	0x6530
 
-/* WinChipHead USB->RS 232 adapter */
-#define WINCHIPHEAD_VENDOR_ID		0x4348
-#define WINCHIPHEAD_USBSER_PRODUCT_ID	0x5523
-
 /* SMART USB Serial Adapter */
 #define SMART_VENDOR_ID	0x0b8c
 #define SMART_PRODUCT_ID	0x2303
diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c
index fc310f75ead..0fded39e3b3 100644
--- a/drivers/usb/storage/protocol.c
+++ b/drivers/usb/storage/protocol.c
@@ -58,7 +58,9 @@
 
 void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 {
-	/* Pad the SCSI command with zeros out to 12 bytes
+	/*
+	 * Pad the SCSI command with zeros out to 12 bytes.  If the
+	 * command already is 12 bytes or longer, leave it alone.
 	 *
 	 * NOTE: This only works because a scsi_cmnd struct field contains
 	 * a unsigned char cmnd[16], so we know we have storage available
@@ -66,9 +68,6 @@ void usb_stor_pad12_command(struct scsi_cmnd *srb, struct us_data *us)
 	for (; srb->cmd_len<12; srb->cmd_len++)
 		srb->cmnd[srb->cmd_len] = 0;
 
-	/* set command length to 12 bytes */
-	srb->cmd_len = 12;
-
 	/* send the command to the transport layer */
 	usb_stor_invoke_transport(srb, us);
 }
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index f91c62d48ff..462a0060173 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1458,12 +1458,12 @@ static struct dentry *nfs_atomic_lookup(struct inode *dir, struct dentry *dentry
 				res = NULL;
 				goto out;
 			/* This turned out not to be a regular file */
+			case -EISDIR:
 			case -ENOTDIR:
 				goto no_open;
 			case -ELOOP:
 				if (!(nd->intent.open.flags & O_NOFOLLOW))
 					goto no_open;
-			/* case -EISDIR: */
 			/* case -EINVAL: */
 			default:
 				res = ERR_CAST(inode);
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 2f093ed1698..dd2f13077be 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -887,3 +887,35 @@ static int nfs_setlease(struct file *file, long arg, struct file_lock **fl)
 			file->f_path.dentry->d_name.name, arg);
 	return -EINVAL;
 }
+
+#ifdef CONFIG_NFS_V4
+static int
+nfs4_file_open(struct inode *inode, struct file *filp)
+{
+	/*
+	 * NFSv4 opens are handled in d_lookup and d_revalidate. If we get to
+	 * this point, then something is very wrong
+	 */
+	dprintk("NFS: %s called! inode=%p filp=%p\n", __func__, inode, filp);
+	return -ENOTDIR;
+}
+
+const struct file_operations nfs4_file_operations = {
+	.llseek		= nfs_file_llseek,
+	.read		= do_sync_read,
+	.write		= do_sync_write,
+	.aio_read	= nfs_file_read,
+	.aio_write	= nfs_file_write,
+	.mmap		= nfs_file_mmap,
+	.open		= nfs4_file_open,
+	.flush		= nfs_file_flush,
+	.release	= nfs_file_release,
+	.fsync		= nfs_file_fsync,
+	.lock		= nfs_lock,
+	.flock		= nfs_flock,
+	.splice_read	= nfs_file_splice_read,
+	.splice_write	= nfs_file_splice_write,
+	.check_flags	= nfs_check_flags,
+	.setlease	= nfs_setlease,
+};
+#endif /* CONFIG_NFS_V4 */
diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c
index 6f4850deb27..c48f9f6ad72 100644
--- a/fs/nfs/inode.c
+++ b/fs/nfs/inode.c
@@ -291,7 +291,7 @@ nfs_fhget(struct super_block *sb, struct nfs_fh *fh, struct nfs_fattr *fattr)
 		 */
 		inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->file_inode_ops;
 		if (S_ISREG(inode->i_mode)) {
-			inode->i_fop = &nfs_file_operations;
+			inode->i_fop = NFS_SB(sb)->nfs_client->rpc_ops->file_ops;
 			inode->i_data.a_ops = &nfs_file_aops;
 			inode->i_data.backing_dev_info = &NFS_SB(sb)->backing_dev_info;
 		} else if (S_ISDIR(inode->i_mode)) {
diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c
index 38053d823eb..771741f1479 100644
--- a/fs/nfs/nfs3proc.c
+++ b/fs/nfs/nfs3proc.c
@@ -853,6 +853,7 @@ const struct nfs_rpc_ops nfs_v3_clientops = {
 	.dentry_ops	= &nfs_dentry_operations,
 	.dir_inode_ops	= &nfs3_dir_inode_operations,
 	.file_inode_ops	= &nfs3_file_inode_operations,
+	.file_ops	= &nfs_file_operations,
 	.getroot	= nfs3_proc_get_root,
 	.getattr	= nfs3_proc_getattr,
 	.setattr	= nfs3_proc_setattr,
diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c
index 92cfd2e1131..a2a7d0a8daf 100644
--- a/fs/nfs/nfs4proc.c
+++ b/fs/nfs/nfs4proc.c
@@ -6008,6 +6008,7 @@ const struct nfs_rpc_ops nfs_v4_clientops = {
 	.dentry_ops	= &nfs4_dentry_operations,
 	.dir_inode_ops	= &nfs4_dir_inode_operations,
 	.file_inode_ops	= &nfs4_file_inode_operations,
+	.file_ops	= &nfs4_file_operations,
 	.getroot	= nfs4_proc_get_root,
 	.getattr	= nfs4_proc_getattr,
 	.setattr	= nfs4_proc_setattr,
diff --git a/fs/nfs/proc.c b/fs/nfs/proc.c
index ac40b8535d7..f48125da198 100644
--- a/fs/nfs/proc.c
+++ b/fs/nfs/proc.c
@@ -710,6 +710,7 @@ const struct nfs_rpc_ops nfs_v2_clientops = {
 	.dentry_ops	= &nfs_dentry_operations,
 	.dir_inode_ops	= &nfs_dir_inode_operations,
 	.file_inode_ops	= &nfs_file_inode_operations,
+	.file_ops	= &nfs_file_operations,
 	.getroot	= nfs_proc_get_root,
 	.getattr	= nfs_proc_getattr,
 	.setattr	= nfs_proc_setattr,
diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h
index 50a7d5fb3b7..36d6ee44386 100644
--- a/fs/xfs/linux-2.6/xfs_buf.h
+++ b/fs/xfs/linux-2.6/xfs_buf.h
@@ -346,7 +346,6 @@ extern struct list_head *xfs_get_buftarg_list(void);
 #define xfs_getsize_buftarg(buftarg)	block_size((buftarg)->bt_bdev)
 #define xfs_readonly_buftarg(buftarg)	bdev_read_only((buftarg)->bt_bdev)
 
-#define xfs_binval(buftarg)		xfs_flush_buftarg(buftarg, 1)
 #define XFS_bflush(buftarg)		xfs_flush_buftarg(buftarg, 1)
 
 #endif	/* __XFS_BUF_H__ */
diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c
index 7f782af286b..b679198dcc0 100644
--- a/fs/xfs/linux-2.6/xfs_file.c
+++ b/fs/xfs/linux-2.6/xfs_file.c
@@ -309,7 +309,19 @@ xfs_file_aio_read(
 	if (XFS_FORCED_SHUTDOWN(mp))
 		return -EIO;
 
-	if (unlikely(ioflags & IO_ISDIRECT)) {
+	/*
+	 * Locking is a bit tricky here. If we take an exclusive lock
+	 * for direct IO, we effectively serialise all new concurrent
+	 * read IO to this file and block it behind IO that is currently in
+	 * progress because IO in progress holds the IO lock shared. We only
+	 * need to hold the lock exclusive to blow away the page cache, so
+	 * only take lock exclusively if the page cache needs invalidation.
+	 * This allows the normal direct IO case of no page cache pages to
+	 * proceeed concurrently without serialisation.
+	 */
+	xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
+	if ((ioflags & IO_ISDIRECT) && inode->i_mapping->nrpages) {
+		xfs_rw_iunlock(ip, XFS_IOLOCK_SHARED);
 		xfs_rw_ilock(ip, XFS_IOLOCK_EXCL);
 
 		if (inode->i_mapping->nrpages) {
@@ -322,8 +334,7 @@ xfs_file_aio_read(
 			}
 		}
 		xfs_rw_ilock_demote(ip, XFS_IOLOCK_EXCL);
-	} else
-		xfs_rw_ilock(ip, XFS_IOLOCK_SHARED);
+	}
 
 	trace_xfs_file_read(ip, size, iocb->ki_pos, ioflags);
 
@@ -658,6 +669,7 @@ xfs_file_aio_write_checks(
 	xfs_fsize_t		new_size;
 	int			error = 0;
 
+	xfs_rw_ilock(ip, XFS_ILOCK_EXCL);
 	error = generic_write_checks(file, pos, count, S_ISBLK(inode->i_mode));
 	if (error) {
 		xfs_rw_iunlock(ip, XFS_ILOCK_EXCL | *iolock);
@@ -749,14 +761,24 @@ xfs_file_dio_aio_write(
 		*iolock = XFS_IOLOCK_EXCL;
 	else
 		*iolock = XFS_IOLOCK_SHARED;
-	xfs_rw_ilock(ip, XFS_ILOCK_EXCL | *iolock);
+	xfs_rw_ilock(ip, *iolock);
 
 	ret = xfs_file_aio_write_checks(file, &pos, &count, iolock);
 	if (ret)
 		return ret;
 
+	/*
+	 * Recheck if there are cached pages that need invalidate after we got
+	 * the iolock to protect against other threads adding new pages while
+	 * we were waiting for the iolock.
+	 */
+	if (mapping->nrpages && *iolock == XFS_IOLOCK_SHARED) {
+		xfs_rw_iunlock(ip, *iolock);
+		*iolock = XFS_IOLOCK_EXCL;
+		xfs_rw_ilock(ip, *iolock);
+	}
+
 	if (mapping->nrpages) {
-		WARN_ON(*iolock != XFS_IOLOCK_EXCL);
 		ret = -xfs_flushinval_pages(ip, (pos & PAGE_CACHE_MASK), -1,
 							FI_REMAPF_LOCKED);
 		if (ret)
@@ -801,7 +823,7 @@ xfs_file_buffered_aio_write(
 	size_t			count = ocount;
 
 	*iolock = XFS_IOLOCK_EXCL;
-	xfs_rw_ilock(ip, XFS_ILOCK_EXCL | *iolock);
+	xfs_rw_ilock(ip, *iolock);
 
 	ret = xfs_file_aio_write_checks(file, &pos, &count, iolock);
 	if (ret)
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index d44d92cd12b..f5b697bf39f 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -69,9 +69,8 @@ xfs_synchronize_times(
 }
 
 /*
- * If the linux inode is valid, mark it dirty.
- * Used when committing a dirty inode into a transaction so that
- * the inode will get written back by the linux code
+ * If the linux inode is valid, mark it dirty, else mark the dirty state
+ * in the XFS inode to make sure we pick it up when reclaiming the inode.
  */
 void
 xfs_mark_inode_dirty_sync(
@@ -81,6 +80,10 @@ xfs_mark_inode_dirty_sync(
 
 	if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
 		mark_inode_dirty_sync(inode);
+	else {
+		barrier();
+		ip->i_update_core = 1;
+	}
 }
 
 void
@@ -91,6 +94,11 @@ xfs_mark_inode_dirty(
 
 	if (!(inode->i_state & (I_WILL_FREE|I_FREEING)))
 		mark_inode_dirty(inode);
+	else {
+		barrier();
+		ip->i_update_core = 1;
+	}
+
 }
 
 /*
@@ -456,7 +464,7 @@ xfs_vn_getattr(
 	trace_xfs_getattr(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
-		return XFS_ERROR(EIO);
+		return -XFS_ERROR(EIO);
 
 	stat->size = XFS_ISIZE(ip);
 	stat->dev = inode->i_sb->s_dev;
diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c
index 347cae965e8..28de70b9122 100644
--- a/fs/xfs/linux-2.6/xfs_super.c
+++ b/fs/xfs/linux-2.6/xfs_super.c
@@ -878,33 +878,17 @@ xfs_log_inode(
 	struct xfs_trans	*tp;
 	int			error;
 
-	xfs_iunlock(ip, XFS_ILOCK_SHARED);
 	tp = xfs_trans_alloc(mp, XFS_TRANS_FSYNC_TS);
 	error = xfs_trans_reserve(tp, 0, XFS_FSYNC_TS_LOG_RES(mp), 0, 0, 0);
-
 	if (error) {
 		xfs_trans_cancel(tp, 0);
-		/* we need to return with the lock hold shared */
-		xfs_ilock(ip, XFS_ILOCK_SHARED);
 		return error;
 	}
 
 	xfs_ilock(ip, XFS_ILOCK_EXCL);
-
-	/*
-	 * Note - it's possible that we might have pushed ourselves out of the
-	 * way during trans_reserve which would flush the inode.  But there's
-	 * no guarantee that the inode buffer has actually gone out yet (it's
-	 * delwri).  Plus the buffer could be pinned anyway if it's part of
-	 * an inode in another recent transaction.  So we play it safe and
-	 * fire off the transaction anyway.
-	 */
-	xfs_trans_ijoin(tp, ip);
+	xfs_trans_ijoin_ref(tp, ip, XFS_ILOCK_EXCL);
 	xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE);
-	error = xfs_trans_commit(tp, 0);
-	xfs_ilock_demote(ip, XFS_ILOCK_EXCL);
-
-	return error;
+	return xfs_trans_commit(tp, 0);
 }
 
 STATIC int
@@ -919,7 +903,9 @@ xfs_fs_write_inode(
 	trace_xfs_write_inode(ip);
 
 	if (XFS_FORCED_SHUTDOWN(mp))
-		return XFS_ERROR(EIO);
+		return -XFS_ERROR(EIO);
+	if (!ip->i_update_core)
+		return 0;
 
 	if (wbc->sync_mode == WB_SYNC_ALL) {
 		/*
@@ -930,12 +916,10 @@ xfs_fs_write_inode(
 		 * of synchronous log foces dramatically.
 		 */
 		xfs_ioend_wait(ip);
-		xfs_ilock(ip, XFS_ILOCK_SHARED);
-		if (ip->i_update_core) {
-			error = xfs_log_inode(ip);
-			if (error)
-				goto out_unlock;
-		}
+		error = xfs_log_inode(ip);
+		if (error)
+			goto out;
+		return 0;
 	} else {
 		/*
 		 * We make this non-blocking if the inode is contended, return
diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c
index b94dace4e78..e70c7fc95e2 100644
--- a/fs/xfs/quota/xfs_qm.c
+++ b/fs/xfs/quota/xfs_qm.c
@@ -714,7 +714,8 @@ xfs_qm_dqattach_one(
 	 * disk and we didn't ask it to allocate;
 	 * ESRCH if quotas got turned off suddenly.
 	 */
-	error = xfs_qm_dqget(ip->i_mount, ip, id, type, XFS_QMOPT_DOWARN, &dqp);
+	error = xfs_qm_dqget(ip->i_mount, ip, id, type,
+			     doalloc | XFS_QMOPT_DOWARN, &dqp);
 	if (error)
 		return error;
 
diff --git a/fs/xfs/xfs_buf_item.c b/fs/xfs/xfs_buf_item.c
index a7342e840d7..7888a756307 100644
--- a/fs/xfs/xfs_buf_item.c
+++ b/fs/xfs/xfs_buf_item.c
@@ -1023,7 +1023,6 @@ xfs_buf_iodone_callbacks(
 	XFS_BUF_UNDELAYWRITE(bp);
 
 	trace_xfs_buf_error_relse(bp, _RET_IP_);
-	xfs_force_shutdown(mp, SHUTDOWN_META_IO_ERROR);
 
 do_callbacks:
 	xfs_buf_do_callbacks(bp);
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index b49b82363d2..9afdd497369 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -44,9 +44,6 @@
 #include "xfs_trace.h"
 
 
-STATIC void	xfs_unmountfs_wait(xfs_mount_t *);
-
-
 #ifdef HAVE_PERCPU_SB
 STATIC void	xfs_icsb_balance_counter(xfs_mount_t *, xfs_sb_field_t,
 						int);
@@ -1507,11 +1504,6 @@ xfs_unmountfs(
 	 */
 	xfs_log_force(mp, XFS_LOG_SYNC);
 
-	xfs_binval(mp->m_ddev_targp);
-	if (mp->m_rtdev_targp) {
-		xfs_binval(mp->m_rtdev_targp);
-	}
-
 	/*
 	 * Unreserve any blocks we have so that when we unmount we don't account
 	 * the reserved free space as used. This is really only necessary for
@@ -1537,7 +1529,16 @@ xfs_unmountfs(
 		xfs_warn(mp, "Unable to update superblock counters. "
 				"Freespace may not be correct on next mount.");
 	xfs_unmountfs_writesb(mp);
-	xfs_unmountfs_wait(mp); 		/* wait for async bufs */
+
+	/*
+	 * Make sure all buffers have been flushed and completed before
+	 * unmounting the log.
+	 */
+	error = xfs_flush_buftarg(mp->m_ddev_targp, 1);
+	if (error)
+		xfs_warn(mp, "%d busy buffers during unmount.", error);
+	xfs_wait_buftarg(mp->m_ddev_targp);
+
 	xfs_log_unmount_write(mp);
 	xfs_log_unmount(mp);
 	xfs_uuid_unmount(mp);
@@ -1548,16 +1549,6 @@ xfs_unmountfs(
 	xfs_free_perag(mp);
 }
 
-STATIC void
-xfs_unmountfs_wait(xfs_mount_t *mp)
-{
-	if (mp->m_logdev_targp != mp->m_ddev_targp)
-		xfs_wait_buftarg(mp->m_logdev_targp);
-	if (mp->m_rtdev_targp)
-		xfs_wait_buftarg(mp->m_rtdev_targp);
-	xfs_wait_buftarg(mp->m_ddev_targp);
-}
-
 int
 xfs_fs_writable(xfs_mount_t *mp)
 {
diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c
index 619720705bc..6cc4d41fb0d 100644
--- a/fs/xfs/xfs_vnodeops.c
+++ b/fs/xfs/xfs_vnodeops.c
@@ -535,7 +535,7 @@ xfs_readlink(
 	char		*link)
 {
 	xfs_mount_t	*mp = ip->i_mount;
-	int		pathlen;
+	xfs_fsize_t	pathlen;
 	int		error = 0;
 
 	trace_xfs_readlink(ip);
@@ -545,13 +545,19 @@ xfs_readlink(
 
 	xfs_ilock(ip, XFS_ILOCK_SHARED);
 
-	ASSERT((ip->i_d.di_mode & S_IFMT) == S_IFLNK);
-	ASSERT(ip->i_d.di_size <= MAXPATHLEN);
-
 	pathlen = ip->i_d.di_size;
 	if (!pathlen)
 		goto out;
 
+	if (pathlen < 0 || pathlen > MAXPATHLEN) {
+		xfs_alert(mp, "%s: inode (%llu) bad symlink length (%lld)",
+			 __func__, (unsigned long long) ip->i_ino,
+			 (long long) pathlen);
+		ASSERT(0);
+		return XFS_ERROR(EFSCORRUPTED);
+	}
+
+
 	if (ip->i_df.if_flags & XFS_IFINLINE) {
 		memcpy(link, ip->i_df.if_u1.if_data, pathlen);
 		link[pathlen] = '\0';
diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h
index b522370fcc2..acdc370086a 100644
--- a/include/linux/nfs_fs.h
+++ b/include/linux/nfs_fs.h
@@ -410,6 +410,9 @@ extern const struct inode_operations nfs_file_inode_operations;
 extern const struct inode_operations nfs3_file_inode_operations;
 #endif /* CONFIG_NFS_V3 */
 extern const struct file_operations nfs_file_operations;
+#ifdef CONFIG_NFS_V4
+extern const struct file_operations nfs4_file_operations;
+#endif /* CONFIG_NFS_V4 */
 extern const struct address_space_operations nfs_file_aops;
 extern const struct address_space_operations nfs_dir_aops;
 
diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h
index be2eba7725a..0012fc3d2c1 100644
--- a/include/linux/nfs_xdr.h
+++ b/include/linux/nfs_xdr.h
@@ -1149,6 +1149,7 @@ struct nfs_rpc_ops {
 	const struct dentry_operations *dentry_ops;
 	const struct inode_operations *dir_inode_ops;
 	const struct inode_operations *file_inode_ops;
+	const struct file_operations *file_ops;
 
 	int	(*getroot) (struct nfs_server *, struct nfs_fh *,
 			    struct nfs_fsinfo *);
diff --git a/kernel/irq/spurious.c b/kernel/irq/spurious.c
index aa57d5da18c..b5f4742693c 100644
--- a/kernel/irq/spurious.c
+++ b/kernel/irq/spurious.c
@@ -115,7 +115,7 @@ static int misrouted_irq(int irq)
 	struct irq_desc *desc;
 	int i, ok = 0;
 
-	if (atomic_inc_return(&irq_poll_active) == 1)
+	if (atomic_inc_return(&irq_poll_active) != 1)
 		goto out;
 
 	irq_poll_cpu = smp_processor_id();
diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c
index 36c2842a86b..848e494fa3c 100644
--- a/net/ipv6/ip6_tunnel.c
+++ b/net/ipv6/ip6_tunnel.c
@@ -289,6 +289,8 @@ static struct ip6_tnl *ip6_tnl_create(struct net *net, struct ip6_tnl_parm *p)
 	if ((err = register_netdevice(dev)) < 0)
 		goto failed_free;
 
+	strcpy(t->parms.name, dev->name);
+
 	dev_hold(dev);
 	ip6_tnl_link(ip6n, t);
 	return t;
@@ -1397,7 +1399,6 @@ ip6_tnl_dev_init_gen(struct net_device *dev)
 	struct ip6_tnl *t = netdev_priv(dev);
 
 	t->dev = dev;
-	strcpy(t->parms.name, dev->name);
 	dev->tstats = alloc_percpu(struct pcpu_tstats);
 	if (!dev->tstats)
 		return -ENOMEM;
@@ -1477,6 +1478,7 @@ static void __net_exit ip6_tnl_destroy_tunnels(struct ip6_tnl_net *ip6n)
 static int __net_init ip6_tnl_init_net(struct net *net)
 {
 	struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
+	struct ip6_tnl *t = NULL;
 	int err;
 
 	ip6n->tnls[0] = ip6n->tnls_wc;
@@ -1497,6 +1499,10 @@ static int __net_init ip6_tnl_init_net(struct net *net)
 	err = register_netdev(ip6n->fb_tnl_dev);
 	if (err < 0)
 		goto err_register;
+
+	t = netdev_priv(ip6n->fb_tnl_dev);
+
+	strcpy(t->parms.name, ip6n->fb_tnl_dev->name);
 	return 0;
 
 err_register:
diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index 7fa8c6be7bf..378bd67334b 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -140,8 +140,9 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	pos++;
 
 	/* IEEE80211_RADIOTAP_RATE */
-	if (status->flag & RX_FLAG_HT) {
+	if (!rate || status->flag & RX_FLAG_HT) {
 		/*
+		 * Without rate information don't add it. If we have,
 		 * MCS information is a separate field in radiotap,
 		 * added below. The byte here is needed as padding
 		 * for the channel though, so initialise it to 0.
@@ -162,12 +163,14 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local,
 	else if (status->flag & RX_FLAG_HT)
 		put_unaligned_le16(IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else if (rate->flags & IEEE80211_RATE_ERP_G)
+	else if (rate && rate->flags & IEEE80211_RATE_ERP_G)
 		put_unaligned_le16(IEEE80211_CHAN_OFDM | IEEE80211_CHAN_2GHZ,
 				   pos);
-	else
+	else if (rate)
 		put_unaligned_le16(IEEE80211_CHAN_CCK | IEEE80211_CHAN_2GHZ,
 				   pos);
+	else
+		put_unaligned_le16(IEEE80211_CHAN_2GHZ, pos);
 	pos += 2;
 
 	/* IEEE80211_RADIOTAP_DBM_ANTSIGNAL */
diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index d3fe2d23748..2124db8e72b 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -1047,6 +1047,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
 	skb = ieee80211_probereq_get(&local->hw, &sdata->vif,
 				     ssid, ssid_len,
 				     buf, buf_len);
+	if (!skb)
+		goto out;
 
 	if (dst) {
 		mgmt = (struct ieee80211_mgmt *) skb->data;
@@ -1055,6 +1057,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata,
 	}
 
 	IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT;
+
+ out:
 	kfree(buf);
 
 	return skb;
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 1ac9443b526..3dac76f33b9 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -126,8 +126,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = {
 	[NL80211_ATTR_MESH_CONFIG] = { .type = NLA_NESTED },
 	[NL80211_ATTR_SUPPORT_MESH_AUTH] = { .type = NLA_FLAG },
 
-	[NL80211_ATTR_HT_CAPABILITY] = { .type = NLA_BINARY,
-					 .len = NL80211_HT_CAPABILITY_LEN },
+	[NL80211_ATTR_HT_CAPABILITY] = { .len = NL80211_HT_CAPABILITY_LEN },
 
 	[NL80211_ATTR_MGMT_SUBTYPE] = { .type = NLA_U8 },
 	[NL80211_ATTR_IE] = { .type = NLA_BINARY,
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 379574c30ad..213103e3f99 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -2254,6 +2254,9 @@ void /* __init_or_exit */ regulatory_exit(void)
 
 	kfree(last_request);
 
+	last_request = NULL;
+	dev_set_uevent_suppress(&reg_pdev->dev, true);
+
 	platform_device_unregister(reg_pdev);
 
 	spin_lock_bh(&reg_pending_beacons_lock);