/* * INET An implementation of the TCP/IP protocol suite for the LINUX * operating system. INET is implemented using the BSD Socket * interface as the means of communication with the user level. * * Ethernet-type device handling. * * Version: @(#)eth.c 1.0.7 05/25/93 * * Authors: Ross Biro, * Fred N. van Kempen, * Mark Evans, * Florian La Roche, * Alan Cox, * * Fixes: * Mr Linux : Arp problems * Alan Cox : Generic queue tidyup (very tiny here) * Alan Cox : eth_header ntohs should be htons * Alan Cox : eth_rebuild_header missing an htons and * minor other things. * Tegge : Arp bug fixes. * Florian : Removed many unnecessary functions, code cleanup * and changes for new arp and skbuff. * Alan Cox : Redid header building to reflect new format. * Alan Cox : ARP only when compiled with CONFIG_INET * Greg Page : 802.2 and SNAP stuff. * Alan Cox : MAC layer pointers/new format. * Paul Gortmaker : eth_copy_and_sum shouldn't csum padding. * Alan Cox : Protect against forwarding explosions with * older network drivers and IFF_ALLMULTI. * Christer Weinigel : Better rebuild header message. * Andrew Morton : 26Feb01: kill ether_setup() - use netdev_boot_setup(). * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern int __init netdev_boot_setup(char *str); __setup("ether=", netdev_boot_setup); /* * Create the Ethernet MAC header for an arbitrary protocol layer * * saddr=NULL means use device source address * daddr=NULL means leave destination address (eg unresolved arp) */ int eth_header(struct sk_buff *skb, struct net_device *dev, unsigned short type, void *daddr, void *saddr, unsigned len) { struct ethhdr *eth = (struct ethhdr *)skb_push(skb,ETH_HLEN); /* * Set the protocol type. For a packet of type ETH_P_802_3 we put the length * in here instead. It is up to the 802.2 layer to carry protocol information. */ if(type!=ETH_P_802_3) eth->h_proto = htons(type); else eth->h_proto = htons(len); /* * Set the source hardware address. */ if(saddr) memcpy(eth->h_source,saddr,dev->addr_len); else memcpy(eth->h_source,dev->dev_addr,dev->addr_len); /* * Anyway, the loopback-device should never use this function... */ if (dev->flags & (IFF_LOOPBACK|IFF_NOARP)) { memset(eth->h_dest, 0, dev->addr_len); return ETH_HLEN; } if(daddr) { memcpy(eth->h_dest,daddr,dev->addr_len); return ETH_HLEN; } return -ETH_HLEN; } /* * Rebuild the Ethernet MAC header. This is called after an ARP * (or in future other address resolution) has completed on this * sk_buff. We now let ARP fill in the other fields. * * This routine CANNOT use cached dst->neigh! * Really, it is used only when dst->neigh is wrong. */ int eth_rebuild_header(struct sk_buff *skb) { struct ethhdr *eth = (struct ethhdr *)skb->data; struct net_device *dev = skb->dev; switch (eth->h_proto) { #ifdef CONFIG_INET case __constant_htons(ETH_P_IP): return arp_find(eth->h_dest, skb); #endif default: printk(KERN_DEBUG "%s: unable to resolve type %X addresses.\n", dev->name, (int)eth->h_proto); memcpy(eth->h_source, dev->dev_addr, dev->addr_len); break; } return 0; } /* * Determine the packet's protocol ID. The rule here is that we * assume 802.3 if the type field is short enough to be a length. * This is normal practice and works for any 'now in use' protocol. */ unsigned short eth_type_trans(struct sk_buff *skb, struct net_device *dev) { struct ethhdr *eth; unsigned char *rawp; skb->mac.raw=skb->data; skb_pull(skb,ETH_HLEN); eth = eth_hdr(skb); skb->input_dev = dev; if(*eth->h_dest&1) { if(memcmp(eth->h_dest,dev->broadcast, ETH_ALEN)==0) skb->pkt_type=PACKET_BROADCAST; else skb->pkt_type=PACKET_MULTICAST; } /* * This ALLMULTI check should be redundant by 1.4 * so don't forget to remove it. * * Seems, you forgot to remove it. All silly devices * seems to set IFF_PROMISC. */ else if(1 /*dev->flags&IFF_PROMISC*/) { if(memcmp(eth->h_dest,dev->dev_addr, ETH_ALEN)) skb->pkt_type=PACKET_OTHERHOST; } if (ntohs(eth->h_proto) >= 1536) return eth->h_proto; rawp = skb->data; /* * This is a magic hack to spot IPX packets. Older Novell breaks * the protocol design and runs IPX over 802.3 without an 802.2 LLC * layer. We look for FFFF which isn't a used 802.2 SSAP/DSAP. This * won't work for fault tolerant netware but does for the rest. */ if (*(unsigned short *)rawp == 0xFFFF) return htons(ETH_P_802_3); /* * Real 802.2 LLC */ return htons(ETH_P_802_2); } static int eth_header_parse(struct sk_buff *skb, unsigned char *haddr) { struct ethhdr *eth = eth_hdr(skb); memcpy(haddr, eth->h_source, ETH_ALEN); return ETH_ALEN; } int eth_header_cache(struct neighbour *neigh, struct hh_cache *hh) { unsigned short type = hh->hh_type; struct ethhdr *eth; struct net_device *dev = neigh->dev; eth = (struct ethhdr*) (((u8*)hh->hh_data) + (HH_DATA_OFF(sizeof(*eth)))); if (type == __constant_htons(ETH_P_802_3)) return -1; eth->h_proto = type; memcpy(eth->h_source, dev->dev_addr, dev->addr_len); memcpy(eth->h_dest, neigh->ha, dev->addr_len); hh->hh_len = ETH_HLEN; return 0; } /* * Called by Address Resolution module to notify changes in address. */ void eth_header_cache_update(struct hh_cache *hh, struct net_device *dev, unsigned char * haddr) { memcpy(((u8*)hh->hh_data) + HH_DATA_OFF(sizeof(struct ethhdr)), haddr, dev->addr_len); } EXPORT_SYMBOL(eth_type_trans); static int eth_mac_addr(struct net_device *dev, void *p) { struct sockaddr *addr=p; if (netif_running(dev)) return -EBUSY; memcpy(dev->dev_addr, addr->sa_data,dev->addr_len); return 0; } static int eth_change_mtu(struct net_device *dev, int new_mtu) { if ((new_mtu < 68) || (new_mtu > 1500)) return -EINVAL; dev->mtu = new_mtu; return 0; } /* * Fill in the fields of the device structure with ethernet-generic values. */ void ether_setup(struct net_device *dev) { dev->change_mtu = eth_change_mtu; dev->hard_header = eth_header; dev->rebuild_header = eth_rebuild_header; dev->set_mac_address = eth_mac_addr; dev->hard_header_cache = eth_header_cache; dev->header_cache_update= eth_header_cache_update; dev->hard_header_parse = eth_header_parse; dev->type = ARPHRD_ETHER; dev->hard_header_len = ETH_HLEN; dev->mtu = 1500; /* eth_mtu */ dev->addr_len = ETH_ALEN; dev->tx_queue_len = 1000; /* Ethernet wants good queues */ dev->flags = IFF_BROADCAST|IFF_MULTICAST; memset(dev->broadcast,0xFF, ETH_ALEN); } EXPORT_SYMBOL(ether_setup); /** * alloc_etherdev - Allocates and sets up an ethernet device * @sizeof_priv: Size of additional driver-private structure to be allocated * for this ethernet device * * Fill in the fields of the device structure with ethernet-generic * values. Basically does everything except registering the device. * * Constructs a new net device, complete with a private data area of * size @sizeof_priv. A 32-byte (not bit) alignment is enforced for * this private data area. */ struct net_device *alloc_etherdev(int sizeof_priv) { return alloc_netdev(sizeof_priv, "eth%d", ether_setup); } EXPORT_SYMBOL(alloc_etherdev);