From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/mips/gt64120/common/Makefile | 6 ++ arch/mips/gt64120/common/pci.c | 147 ++++++++++++++++++++++++++++++++++++++ arch/mips/gt64120/common/time.c | 100 ++++++++++++++++++++++++++ 3 files changed, 253 insertions(+) create mode 100644 arch/mips/gt64120/common/Makefile create mode 100644 arch/mips/gt64120/common/pci.c create mode 100644 arch/mips/gt64120/common/time.c (limited to 'arch/mips/gt64120/common') diff --git a/arch/mips/gt64120/common/Makefile b/arch/mips/gt64120/common/Makefile new file mode 100644 index 00000000000..eba5051015a --- /dev/null +++ b/arch/mips/gt64120/common/Makefile @@ -0,0 +1,6 @@ +# +# Makefile for common code of gt64120-based boards. +# + +obj-y += time.o +obj-$(CONFIG_PCI) += pci.o diff --git a/arch/mips/gt64120/common/pci.c b/arch/mips/gt64120/common/pci.c new file mode 100644 index 00000000000..e9e5419a0d5 --- /dev/null +++ b/arch/mips/gt64120/common/pci.c @@ -0,0 +1,147 @@ +/* + * BRIEF MODULE DESCRIPTION + * Galileo Evaluation Boards PCI support. + * + * The general-purpose functions to read/write and configure the GT64120A's + * PCI registers (function names start with pci0 or pci1) are either direct + * copies of functions written by Galileo Technology, or are modifications + * of their functions to work with Linux 2.4 vs Linux 2.2. These functions + * are Copyright - Galileo Technology. + * + * Other functions are derived from other MIPS PCI implementations, or were + * written by RidgeRun, Inc, Copyright (C) 2000 RidgeRun, Inc. + * glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include +#include +#include +#include +#include + +#define SELF 0 + +/* + * pciXReadConfigReg - Read from a PCI configuration register + * - Make sure the GT is configured as a master before + * reading from another device on the PCI. + * - The function takes care of Big/Little endian conversion. + * INPUTS: regOffset: The register offset as it apears in the GT spec (or PCI + * spec) + * pciDevNum: The device number needs to be addressed. + * RETURNS: data , if the data == 0xffffffff check the master abort bit in the + * cause register to make sure the data is valid + * + * Configuration Address 0xCF8: + * + * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number + * |congif|Reserved| Bus |Device|Function|Register|00| + * |Enable| |Number|Number| Number | Number | | <=field Name + * + */ +static unsigned int pci0ReadConfigReg(int offset, struct pci_dev *device) +{ + unsigned int DataForRegCf8; + unsigned int data; + + DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) | + (PCI_FUNC(device->devfn) << 8) | + (offset & ~0x3)) | 0x80000000; + GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8); + + /* + * The casual observer might wonder why the READ is duplicated here, + * rather than immediately following the WRITE, and just have the swap + * in the "if". That's because there is a latency problem with trying + * to read immediately after setting up the address register. The "if" + * check gives enough time for the address to stabilize, so the READ + * can work. + */ + if (PCI_SLOT(device->devfn) == SELF) /* This board */ + return GT_READ(GT_PCI0_CFGDATA_OFS); + else /* PCI is little endian so swap the Data. */ + return __GT_READ(GT_PCI0_CFGDATA_OFS); +} + +/* + * pciXWriteConfigReg - Write to a PCI configuration register + * - Make sure the GT is configured as a master before + * writingto another device on the PCI. + * - The function takes care of Big/Little endian conversion. + * Inputs: unsigned int regOffset: The register offset as it apears in the + * GT spec + * (or any other PCI device spec) + * pciDevNum: The device number needs to be addressed. + * + * Configuration Address 0xCF8: + * + * 31 30 24 23 16 15 11 10 8 7 2 0 <=bit Number + * |congif|Reserved| Bus |Device|Function|Register|00| + * |Enable| |Number|Number| Number | Number | | <=field Name + * + */ +static void pci0WriteConfigReg(unsigned int offset, + struct pci_dev *device, unsigned int data) +{ + unsigned int DataForRegCf8; + + DataForRegCf8 = ((PCI_SLOT(device->devfn) << 11) | + (PCI_FUNC(device->devfn) << 8) | + (offset & ~0x3)) | 0x80000000; + GT_WRITE(GT_PCI0_CFGADDR_OFS, DataForRegCf8); + + if (PCI_SLOT(device->devfn) == SELF) /* This board */ + GT_WRITE(GT_PCI0_CFGDATA_OFS, data); + else /* configuration Transaction over the pci. */ + __GT_WRITE(GT_PCI0_CFGDATA_OFS, data); +} + +extern struct pci_ops gt64120_pci_ops; + +void __init pcibios_init(void) +{ + u32 tmp; + struct pci_dev controller; + + controller.devfn = SELF; + + tmp = GT_READ(GT_PCI0_CMD_OFS); /* Huh??? -- Ralf */ + tmp = GT_READ(GT_PCI0_BARE_OFS); + + /* + * You have to enable bus mastering to configure any other + * card on the bus. + */ + tmp = pci0ReadConfigReg(PCI_COMMAND, &controller); + tmp |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | PCI_COMMAND_SERR; + pci0WriteConfigReg(PCI_COMMAND, &controller, tmp); + + /* + * Reset PCI I/O and PCI MEM values to ones supported by EVM. + */ + ioport_resource.start = GT_PCI_IO_BASE; + ioport_resource.end = GT_PCI_IO_BASE + GT_PCI_IO_SIZE - 1; + iomem_resource.start = GT_PCI_MEM_BASE; + iomem_resource.end = GT_PCI_MEM_BASE + GT_PCI_MEM_SIZE - 1; + + pci_scan_bus(0, >64120_pci_ops, NULL); +} diff --git a/arch/mips/gt64120/common/time.c b/arch/mips/gt64120/common/time.c new file mode 100644 index 00000000000..2287b59536e --- /dev/null +++ b/arch/mips/gt64120/common/time.c @@ -0,0 +1,100 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * Galileo Technology chip interrupt handler + */ +#include +#include +#include +#include +#include +#include +#include + +/* + * These are interrupt handlers for the GT on-chip interrupts. They all come + * in to the MIPS on a single interrupt line, and have to be handled and ack'ed + * differently than other MIPS interrupts. + */ + +static void gt64120_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + unsigned int irq_src, int_high_src, irq_src_mask, int_high_src_mask; + int handled = 0; + + irq_src = GT_READ(GT_INTRCAUSE_OFS); + irq_src_mask = GT_READ(GT_INTRMASK_OFS); + int_high_src = GT_READ(GT_HINTRCAUSE_OFS); + int_high_src_mask = GT_READ(GT_HINTRMASK_OFS); + irq_src = irq_src & irq_src_mask; + int_high_src = int_high_src & int_high_src_mask; + + if (irq_src & 0x00000800) { /* Check for timer interrupt */ + handled = 1; + irq_src &= ~0x00000800; + do_timer(regs); +#ifndef CONFIG_SMP + update_process_times(user_mode(regs)); +#endif + } + + GT_WRITE(GT_INTRCAUSE_OFS, 0); + GT_WRITE(GT_HINTRCAUSE_OFS, 0); +} + +/* + * Initializes timer using galileo's built in timer. + */ +#ifdef CONFIG_SYSCLK_100 +#define Sys_clock (100 * 1000000) // 100 MHz +#endif +#ifdef CONFIG_SYSCLK_83 +#define Sys_clock (83.333 * 1000000) // 83.333 MHz +#endif +#ifdef CONFIG_SYSCLK_75 +#define Sys_clock (75 * 1000000) // 75 MHz +#endif + +/* + * This will ignore the standard MIPS timer interrupt handler that is passed in + * as *irq (=irq0 in ../kernel/time.c). We will do our own timer interrupt + * handling. + */ +void gt64120_time_init(void) +{ + static struct irqaction timer; + + /* Disable timer first */ + GT_WRITE(GT_TC_CONTROL_OFS, 0); + /* Load timer value for 100 Hz */ + GT_WRITE(GT_TC3_OFS, Sys_clock / 100); + + /* + * Create the IRQ structure entry for the timer. Since we're too early + * in the boot process to use the "request_irq()" call, we'll hard-code + * the values to the correct interrupt line. + */ + timer.handler = gt64120_irq; + timer.flags = SA_SHIRQ | SA_INTERRUPT; + timer.name = "timer"; + timer.dev_id = NULL; + timer.next = NULL; + timer.mask = CPU_MASK_NONE; + irq_desc[GT_TIMER].action = &timer; + + enable_irq(GT_TIMER); + + /* Enable timer ints */ + GT_WRITE(GT_TC_CONTROL_OFS, 0xc0); + /* clear Cause register first */ + GT_WRITE(GT_INTRCAUSE_OFS, 0x0); + /* Unmask timer int */ + GT_WRITE(GT_INTRMASK_OFS, 0x800); + /* Clear High int register */ + GT_WRITE(GT_HINTRCAUSE_OFS, 0x0); + /* Mask All interrupts at High cause interrupt */ + GT_WRITE(GT_HINTRMASK_OFS, 0x0); +} -- cgit v1.2.3