From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- arch/m68k/q40/Makefile | 5 + arch/m68k/q40/README | 138 ++++++++++++++ arch/m68k/q40/config.c | 365 +++++++++++++++++++++++++++++++++++++ arch/m68k/q40/q40ints.c | 476 ++++++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 984 insertions(+) create mode 100644 arch/m68k/q40/Makefile create mode 100644 arch/m68k/q40/README create mode 100644 arch/m68k/q40/config.c create mode 100644 arch/m68k/q40/q40ints.c (limited to 'arch/m68k/q40') diff --git a/arch/m68k/q40/Makefile b/arch/m68k/q40/Makefile new file mode 100644 index 00000000000..27eb42796af --- /dev/null +++ b/arch/m68k/q40/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for Linux arch/m68k/q40 source directory +# + +obj-y := config.o q40ints.o diff --git a/arch/m68k/q40/README b/arch/m68k/q40/README new file mode 100644 index 00000000000..6bdbf487957 --- /dev/null +++ b/arch/m68k/q40/README @@ -0,0 +1,138 @@ +Linux for the Q40 +================= + +You may try http://www.geocities.com/SiliconValley/Bay/2602/ for +some up to date information. Booter and other tools will be also +available from this place or ftp.uni-erlangen.de/linux/680x0/q40/ +and mirrors. + +Hints to documentation usually refer to the linux source tree in +/usr/src/linux/Documentation unless URL given. + +It seems IRQ unmasking can't be safely done on a Q40. IRQ probing +is not implemented - do not try it! (See below) + +For a list of kernel command-line options read the documentation for the +particular device drivers. + +The floppy imposes a very high interrupt load on the CPU, approx 30K/s. +When something blocks interrupts (HD) it will lose some of them, so far +this is not known to have caused any data loss. On highly loaded systems +it can make the floppy very slow or practically stop. Other Q40 OS' simply +poll the floppy for this reason - something that can't be done in Linux. +Only possible cure is getting a 82072 controller with fifo instead of +the 8272A. + +drivers used by the Q40, apart from the very obvious (console etc.): + drivers/char/q40_keyb.c # use PC keymaps for national keyboards + serial.c # normal PC driver - any speed + lp.c # printer driver + genrtc.c # RTC + char/joystick/* # most of this should work, not + # in default config.in + block/q40ide.c # startup for ide + ide* # see Documentation/ide.txt + floppy.c # normal PC driver, DMA emu in asm/floppy.h + # and arch/m68k/kernel/entry.S + # see drivers/block/README.fd + net/ne.c + video/q40fb.c + parport/* + sound/dmasound_core.c + dmasound_q40.c + +Various other PC drivers can be enabled simply by adding them to +arch/m68k/config.in, especially 8 bit devices should be without any +problems. For cards using 16bit io/mem more care is required, like +checking byte order issues, hacking memcpy_*_io etc. + + +Debugging +========= + +Upon startup the kernel will usually output "ABCQGHIJ" into the SRAM, +preceded by the booter signature. This is a trace just in case something +went wrong during earliest setup stages of head.S. +**Changed** to preserve SRAM contents by default, this is only done when +requested - SRAM must start with '%LX$' signature to do this. '-d' option +to 'lxx' loader enables this. + +SRAM can also be used as additional console device, use debug=mem. +This will save kernel startup msgs into SRAM, the screen will display +only the penguin - and shell prompt if it gets that far.. +Unfortunately only 2000 bytes are available. + +Serial console works and can also be used for debugging, see loader_txt + +Most problems seem to be caused by fawlty or badly configured io-cards or +hard drives anyway. +Make sure to configure the parallel port as SPP and remove IRQ/DMA jumpers +for first testing. The Q40 does not support DMA and may have trouble with +parallel ports version of interrupts. + + +Q40 Hardware Description +======================== + +This is just an overview, see asm-m68k/* for details ask if you have any +questions. + +The Q40 consists of a 68040@40 MHz, 1MB video RAM, up to 32MB RAM, AT-style +keyboard interface, 1 Programmable LED, 2x8bit DACs and up to 1MB ROM, 1MB +shadow ROM. +The Q60 has any of 68060 or 68LC060 and up to 128 MB RAM. + +Most interfacing like floppy, IDE, serial and parallel ports is done via ISA +slots. The ISA io and mem range is mapped (sparse&byteswapped!) into separate +regions of the memory. +The main interrupt register IIRQ_REG will indicate whether an IRQ was internal +or from some ISA devices, EIRQ_REG can distinguish up to 8 ISA IRQs. + +The Q40 custom chip is programmable to provide 2 periodic timers: + - 50 or 200 Hz - level 2, !!THIS CANT BE DISABLED!! + - 10 or 20 KHz - level 4, used for dma-sound + +Linux uses the 200 Hz interrupt for timer and beep by default. + + +Interrupts +========== + +q40 master chip handles only a subset of level triggered interrupts. + +Linux has some requirements wrt interrupt architecture, these are +to my knowledge: + (a) interrupt handler must not be reentered even when sti() is called + from within handler + (b) working enable/disable_irq + +Luckily these requirements are only important for drivers shared +with other architectures - ide,serial,parallel, ethernet. +q40ints.c now contains a trivial hack for (a), (b) is more difficult +because only irq's 4-15 can be disabled - and only all of them at once. +Thus disable_irq() can effectively block the machine if the driver goes +asleep. +One thing to keep in mind when hacking around the interrupt code is +that there is no way to find out which IRQ caused a request, [EI]IRQ_REG +displays current state of the various IRQ lines. + +Keyboard +======== + +q40 receives AT make/break codes from the keyboard, these are translated to +the PC scancodes x86 Linux uses. So by theory every national keyboard should +work just by loading the appropriate x86 keytable - see any national-HOWTO. + +Unfortunately the AT->PC translation isn't quite trivial and even worse, my +documentation of it is absolutely minimal - thus some exotic keys may not +behave exactly as expected. + +There is still hope that it can be fixed completely though. If you encounter +problems, email me ideally this: + - exact keypress/release sequence + - 'showkey -s' run on q40, non-X session + - 'showkey -s' run on a PC, non-X session + - AT codes as displayed by the q40 debugging ROM +btw if the showkey output from PC and Q40 doesn't differ then you have some +classic configuration problem - don't send me anything in this case + diff --git a/arch/m68k/q40/config.c b/arch/m68k/q40/config.c new file mode 100644 index 00000000000..02b626bae4a --- /dev/null +++ b/arch/m68k/q40/config.c @@ -0,0 +1,365 @@ +/* + * arch/m68k/q40/config.c + * + * Copyright (C) 1999 Richard Zidlicky + * + * originally based on: + * + * linux/bvme/config.c + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file README.legal in the main directory of this archive + * for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +extern void floppy_setup(char *str, int *ints); + +extern irqreturn_t q40_process_int (int level, struct pt_regs *regs); +extern irqreturn_t (*q40_default_handler[]) (int, void *, struct pt_regs *); /* added just for debugging */ +extern void q40_init_IRQ (void); +extern void q40_free_irq (unsigned int, void *); +extern int show_q40_interrupts (struct seq_file *, void *); +extern void q40_enable_irq (unsigned int); +extern void q40_disable_irq (unsigned int); +static void q40_get_model(char *model); +static int q40_get_hardware_list(char *buffer); +extern int q40_request_irq(unsigned int irq, irqreturn_t (*handler)(int, void *, struct pt_regs *), unsigned long flags, const char *devname, void *dev_id); +extern void q40_sched_init(irqreturn_t (*handler)(int, void *, struct pt_regs *)); + +extern unsigned long q40_gettimeoffset (void); +extern int q40_hwclk (int, struct rtc_time *); +extern unsigned int q40_get_ss (void); +extern int q40_set_clock_mmss (unsigned long); +static int q40_get_rtc_pll(struct rtc_pll_info *pll); +static int q40_set_rtc_pll(struct rtc_pll_info *pll); +extern void q40_reset (void); +void q40_halt(void); +extern void q40_waitbut(void); +void q40_set_vectors (void); + +extern void q40_mksound(unsigned int /*freq*/, unsigned int /*ticks*/ ); + +extern char m68k_debug_device[]; +static void q40_mem_console_write(struct console *co, const char *b, + unsigned int count); + +extern int ql_ticks; + +static struct console q40_console_driver = { + .name = "debug", + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +/* early debugging function:*/ +extern char *q40_mem_cptr; /*=(char *)0xff020000;*/ +static int _cpleft; + +static void q40_mem_console_write(struct console *co, const char *s, + unsigned int count) +{ + char *p=(char *)s; + + if (count<_cpleft) + while (count-- >0){ + *q40_mem_cptr=*p++; + q40_mem_cptr+=4; + _cpleft--; + } +} +#if 0 +void printq40(char *str) +{ + int l=strlen(str); + char *p=q40_mem_cptr; + + while (l-- >0 && _cpleft-- >0) + { + *p=*str++; + p+=4; + } + q40_mem_cptr=p; +} +#endif + +static int halted=0; + +#ifdef CONFIG_HEARTBEAT +static void q40_heartbeat(int on) +{ + if (halted) return; + + if (on) + Q40_LED_ON(); + else + Q40_LED_OFF(); +} +#endif + +void q40_reset(void) +{ + halted=1; + printk ("\n\n*******************************************\n" + "Called q40_reset : press the RESET button!! \n" + "*******************************************\n"); + Q40_LED_ON(); + while(1) ; +} +void q40_halt(void) +{ + halted=1; + printk ("\n\n*******************\n" + " Called q40_halt\n" + "*******************\n"); + Q40_LED_ON(); + while(1) ; +} + +static void q40_get_model(char *model) +{ + sprintf(model, "Q40"); +} + +/* No hardware options on Q40? */ + +static int q40_get_hardware_list(char *buffer) +{ + *buffer = '\0'; + return 0; +} + +static unsigned int serports[]={0x3f8,0x2f8,0x3e8,0x2e8,0}; +void q40_disable_irqs(void) +{ + unsigned i,j; + + j=0; + while((i=serports[j++])) outb(0,i+UART_IER); + master_outb(0,EXT_ENABLE_REG); + master_outb(0,KEY_IRQ_ENABLE_REG); +} + +void __init config_q40(void) +{ + mach_sched_init = q40_sched_init; + + mach_init_IRQ = q40_init_IRQ; + mach_gettimeoffset = q40_gettimeoffset; + mach_hwclk = q40_hwclk; + mach_get_ss = q40_get_ss; + mach_get_rtc_pll = q40_get_rtc_pll; + mach_set_rtc_pll = q40_set_rtc_pll; + mach_set_clock_mmss = q40_set_clock_mmss; + + mach_reset = q40_reset; + mach_free_irq = q40_free_irq; + mach_process_int = q40_process_int; + mach_get_irq_list = show_q40_interrupts; + mach_request_irq = q40_request_irq; + enable_irq = q40_enable_irq; + disable_irq = q40_disable_irq; + mach_default_handler = &q40_default_handler; + mach_get_model = q40_get_model; + mach_get_hardware_list = q40_get_hardware_list; + +#if defined(CONFIG_INPUT_M68K_BEEP) || defined(CONFIG_INPUT_M68K_BEEP_MODULE) + mach_beep = q40_mksound; +#endif +#ifdef CONFIG_HEARTBEAT + mach_heartbeat = q40_heartbeat; +#endif + mach_halt = q40_halt; +#ifdef CONFIG_DUMMY_CONSOLE + conswitchp = &dummy_con; +#endif + + /* disable a few things that SMSQ might have left enabled */ + q40_disable_irqs(); + + /* no DMA at all, but ide-scsi requires it.. make sure + * all physical RAM fits into the boundary - otherwise + * allocator may play costly and useless tricks */ + mach_max_dma_address = 1024*1024*1024; + + /* useful for early debugging stages - writes kernel messages into SRAM */ + if (!strncmp( m68k_debug_device,"mem",3 )) + { + /*printk("using NVRAM debug, q40_mem_cptr=%p\n",q40_mem_cptr);*/ + _cpleft=2000-((long)q40_mem_cptr-0xff020000)/4; + q40_console_driver.write = q40_mem_console_write; + register_console(&q40_console_driver); + } +} + + +int q40_parse_bootinfo(const struct bi_record *rec) +{ + return 1; +} + + +static inline unsigned char bcd2bin (unsigned char b) +{ + return ((b>>4)*10 + (b&15)); +} + +static inline unsigned char bin2bcd (unsigned char b) +{ + return (((b/10)*16) + (b%10)); +} + + +unsigned long q40_gettimeoffset (void) +{ + return 5000*(ql_ticks!=0); +} + + +/* + * Looks like op is non-zero for setting the clock, and zero for + * reading the clock. + * + * struct hwclk_time { + * unsigned sec; 0..59 + * unsigned min; 0..59 + * unsigned hour; 0..23 + * unsigned day; 1..31 + * unsigned mon; 0..11 + * unsigned year; 00... + * int wday; 0..6, 0 is Sunday, -1 means unknown/don't set + * }; + */ + +int q40_hwclk(int op, struct rtc_time *t) +{ + if (op) + { /* Write.... */ + Q40_RTC_CTRL |= Q40_RTC_WRITE; + + Q40_RTC_SECS = bin2bcd(t->tm_sec); + Q40_RTC_MINS = bin2bcd(t->tm_min); + Q40_RTC_HOUR = bin2bcd(t->tm_hour); + Q40_RTC_DATE = bin2bcd(t->tm_mday); + Q40_RTC_MNTH = bin2bcd(t->tm_mon + 1); + Q40_RTC_YEAR = bin2bcd(t->tm_year%100); + if (t->tm_wday >= 0) + Q40_RTC_DOW = bin2bcd(t->tm_wday+1); + + Q40_RTC_CTRL &= ~(Q40_RTC_WRITE); + } + else + { /* Read.... */ + Q40_RTC_CTRL |= Q40_RTC_READ; + + t->tm_year = bcd2bin (Q40_RTC_YEAR); + t->tm_mon = bcd2bin (Q40_RTC_MNTH)-1; + t->tm_mday = bcd2bin (Q40_RTC_DATE); + t->tm_hour = bcd2bin (Q40_RTC_HOUR); + t->tm_min = bcd2bin (Q40_RTC_MINS); + t->tm_sec = bcd2bin (Q40_RTC_SECS); + + Q40_RTC_CTRL &= ~(Q40_RTC_READ); + + if (t->tm_year < 70) + t->tm_year += 100; + t->tm_wday = bcd2bin(Q40_RTC_DOW)-1; + + } + + return 0; +} + +unsigned int q40_get_ss(void) +{ + return bcd2bin(Q40_RTC_SECS); +} + +/* + * Set the minutes and seconds from seconds value 'nowtime'. Fail if + * clock is out by > 30 minutes. Logic lifted from atari code. + */ + +int q40_set_clock_mmss (unsigned long nowtime) +{ + int retval = 0; + short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60; + + int rtc_minutes; + + + rtc_minutes = bcd2bin (Q40_RTC_MINS); + + if ((rtc_minutes < real_minutes + ? real_minutes - rtc_minutes + : rtc_minutes - real_minutes) < 30) + { + Q40_RTC_CTRL |= Q40_RTC_WRITE; + Q40_RTC_MINS = bin2bcd(real_minutes); + Q40_RTC_SECS = bin2bcd(real_seconds); + Q40_RTC_CTRL &= ~(Q40_RTC_WRITE); + } + else + retval = -1; + + + return retval; +} + + +/* get and set PLL calibration of RTC clock */ +#define Q40_RTC_PLL_MASK ((1<<5)-1) +#define Q40_RTC_PLL_SIGN (1<<5) + +static int q40_get_rtc_pll(struct rtc_pll_info *pll) +{ + int tmp=Q40_RTC_CTRL; + pll->pll_value = tmp & Q40_RTC_PLL_MASK; + if (tmp & Q40_RTC_PLL_SIGN) + pll->pll_value = -pll->pll_value; + pll->pll_max=31; + pll->pll_min=-31; + pll->pll_posmult=512; + pll->pll_negmult=256; + pll->pll_clock=125829120; + return 0; +} + +static int q40_set_rtc_pll(struct rtc_pll_info *pll) +{ + if (!pll->pll_ctrl){ + /* the docs are a bit unclear so I am doublesetting */ + /* RTC_WRITE here ... */ + int tmp = (pll->pll_value & 31) | (pll->pll_value<0 ? 32 : 0) | + Q40_RTC_WRITE; + Q40_RTC_CTRL |= Q40_RTC_WRITE; + Q40_RTC_CTRL = tmp; + Q40_RTC_CTRL &= ~(Q40_RTC_WRITE); + return 0; + } else + return -EINVAL; +} diff --git a/arch/m68k/q40/q40ints.c b/arch/m68k/q40/q40ints.c new file mode 100644 index 00000000000..f8ecc2664fe --- /dev/null +++ b/arch/m68k/q40/q40ints.c @@ -0,0 +1,476 @@ +/* + * arch/m68k/q40/q40ints.c + * + * Copyright (C) 1999,2001 Richard Zidlicky + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file COPYING in the main directory of this archive + * for more details. + * + * .. used to be loosely based on bvme6000ints.c + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +#include +#include + +/* + * Q40 IRQs are defined as follows: + * 3,4,5,6,7,10,11,14,15 : ISA dev IRQs + * 16-31: reserved + * 32 : keyboard int + * 33 : frame int (50/200 Hz periodic timer) + * 34 : sample int (10/20 KHz periodic timer) + * +*/ + +extern int ints_inited; + + +irqreturn_t q40_irq2_handler (int, void *, struct pt_regs *fp); + + +static irqreturn_t q40_defhand (int irq, void *dev_id, struct pt_regs *fp); +static irqreturn_t default_handler(int lev, void *dev_id, struct pt_regs *regs); + + +#define DEVNAME_SIZE 24 + +static struct q40_irq_node { + irqreturn_t (*handler)(int, void *, struct pt_regs *); + unsigned long flags; + void *dev_id; + /* struct q40_irq_node *next;*/ + char devname[DEVNAME_SIZE]; + unsigned count; + unsigned short state; +} irq_tab[Q40_IRQ_MAX+1]; + +short unsigned q40_ablecount[Q40_IRQ_MAX+1]; + +/* + * void q40_init_IRQ (void) + * + * Parameters: None + * + * Returns: Nothing + * + * This function is called during kernel startup to initialize + * the q40 IRQ handling routines. + */ + +static int disabled=0; + +void q40_init_IRQ (void) +{ + int i; + + disabled=0; + for (i = 0; i <= Q40_IRQ_MAX; i++) { + irq_tab[i].handler = q40_defhand; + irq_tab[i].flags = 0; + irq_tab[i].dev_id = NULL; + /* irq_tab[i].next = NULL;*/ + irq_tab[i].devname[0] = 0; + irq_tab[i].count = 0; + irq_tab[i].state =0; + q40_ablecount[i]=0; /* all enabled */ + } + + /* setup handler for ISA ints */ + cpu_request_irq(IRQ2, q40_irq2_handler, 0, "q40 ISA and master chip", + NULL); + + /* now enable some ints.. */ + master_outb(1,EXT_ENABLE_REG); /* ISA IRQ 5-15 */ + + /* make sure keyboard IRQ is disabled */ + master_outb(0,KEY_IRQ_ENABLE_REG); +} + +int q40_request_irq(unsigned int irq, + irqreturn_t (*handler)(int, void *, struct pt_regs *), + unsigned long flags, const char *devname, void *dev_id) +{ + /*printk("q40_request_irq %d, %s\n",irq,devname);*/ + + if (irq > Q40_IRQ_MAX || (irq>15 && irq<32)) { + printk("%s: Incorrect IRQ %d from %s\n", __FUNCTION__, irq, devname); + return -ENXIO; + } + + /* test for ISA ints not implemented by HW */ + switch (irq) + { + case 1: case 2: case 8: case 9: + case 12: case 13: + printk("%s: ISA IRQ %d from %s not implemented by HW\n", __FUNCTION__, irq, devname); + return -ENXIO; + case 11: + printk("warning IRQ 10 and 11 not distinguishable\n"); + irq=10; + default: + ; + } + + if (irq Q40_IRQ_MAX || (irq>15 && irq<32)) { + printk("%s: Incorrect IRQ %d, dev_id %x \n", __FUNCTION__, irq, (unsigned)dev_id); + return; + } + + /* test for ISA ints not implemented by HW */ + switch (irq) + { + case 1: case 2: case 8: case 9: + case 12: case 13: + printk("%s: ISA IRQ %d from %x invalid\n", __FUNCTION__, irq, (unsigned)dev_id); + return; + case 11: irq=10; + default: + ; + } + + if (irqpc, fp->d0, fp->orig_d0, fp->d1, fp->d2); + printk("\tIIRQ_REG = %x, EIRQ_REG = %x\n",master_inb(IIRQ_REG),master_inb(EIRQ_REG)); + return IRQ_HANDLED; +} + +/* + * this stuff doesn't really belong here.. +*/ + +int ql_ticks; /* 200Hz ticks since last jiffie */ +static int sound_ticks; + +#define SVOL 45 + +void q40_mksound(unsigned int hz, unsigned int ticks) +{ + /* for now ignore hz, except that hz==0 switches off sound */ + /* simply alternate the ampl (128-SVOL)-(128+SVOL)-..-.. at 200Hz */ + if (hz==0) + { + if (sound_ticks) + sound_ticks=1; + + *DAC_LEFT=128; + *DAC_RIGHT=128; + + return; + } + /* sound itself is done in q40_timer_int */ + if (sound_ticks == 0) sound_ticks=1000; /* pretty long beep */ + sound_ticks=ticks<<1; +} + +static irqreturn_t (*q40_timer_routine)(int, void *, struct pt_regs *); + +static irqreturn_t q40_timer_int (int irq, void * dev, struct pt_regs * regs) +{ + ql_ticks = ql_ticks ? 0 : 1; + if (sound_ticks) + { + unsigned char sval=(sound_ticks & 1) ? 128-SVOL : 128+SVOL; + sound_ticks--; + *DAC_LEFT=sval; + *DAC_RIGHT=sval; + } + + if (!ql_ticks) + q40_timer_routine(irq, dev, regs); + return IRQ_HANDLED; +} + +void q40_sched_init (irqreturn_t (*timer_routine)(int, void *, struct pt_regs *)) +{ + int timer_irq; + + q40_timer_routine = timer_routine; + timer_irq=Q40_IRQ_FRAME; + + if (request_irq(timer_irq, q40_timer_int, 0, + "timer", q40_timer_int)) + panic ("Couldn't register timer int"); + + master_outb(-1,FRAME_CLEAR_REG); + master_outb( 1,FRAME_RATE_REG); +} + + +/* + * tables to translate bits into IRQ numbers + * it is a good idea to order the entries by priority + * +*/ + +struct IRQ_TABLE{ unsigned mask; int irq ;}; +#if 0 +static struct IRQ_TABLE iirqs[]={ + {Q40_IRQ_FRAME_MASK,Q40_IRQ_FRAME}, + {Q40_IRQ_KEYB_MASK,Q40_IRQ_KEYBOARD}, + {0,0}}; +#endif +static struct IRQ_TABLE eirqs[] = { + { .mask = Q40_IRQ3_MASK, .irq = 3 }, /* ser 1 */ + { .mask = Q40_IRQ4_MASK, .irq = 4 }, /* ser 2 */ + { .mask = Q40_IRQ14_MASK, .irq = 14 }, /* IDE 1 */ + { .mask = Q40_IRQ15_MASK, .irq = 15 }, /* IDE 2 */ + { .mask = Q40_IRQ6_MASK, .irq = 6 }, /* floppy, handled elsewhere */ + { .mask = Q40_IRQ7_MASK, .irq = 7 }, /* par */ + { .mask = Q40_IRQ5_MASK, .irq = 5 }, + { .mask = Q40_IRQ10_MASK, .irq = 10 }, + {0,0} +}; + +/* complain only this many times about spurious ints : */ +static int ccleirq=60; /* ISA dev IRQ's*/ +/*static int cclirq=60;*/ /* internal */ + +/* FIXME: add shared ints,mask,unmask,probing.... */ + +#define IRQ_INPROGRESS 1 +/*static unsigned short saved_mask;*/ +//static int do_tint=0; + +#define DEBUG_Q40INT +/*#define IP_USE_DISABLE *//* would be nice, but crashes ???? */ + +static int mext_disabled=0; /* ext irq disabled by master chip? */ +static int aliased_irq=0; /* how many times inside handler ?*/ + + +/* got level 2 interrupt, dispatch to ISA or keyboard/timer IRQs */ +irqreturn_t q40_irq2_handler (int vec, void *devname, struct pt_regs *fp) +{ + unsigned mir, mer; + int irq,i; + +//repeat: + mir=master_inb(IIRQ_REG); + if (mir&Q40_IRQ_FRAME_MASK) { + irq_tab[Q40_IRQ_FRAME].count++; + irq_tab[Q40_IRQ_FRAME].handler(Q40_IRQ_FRAME,irq_tab[Q40_IRQ_FRAME].dev_id,fp); + master_outb(-1,FRAME_CLEAR_REG); + } + if ((mir&Q40_IRQ_SER_MASK) || (mir&Q40_IRQ_EXT_MASK)) { + mer=master_inb(EIRQ_REG); + for (i=0; eirqs[i].mask; i++) { + if (mer&(eirqs[i].mask)) { + irq=eirqs[i].irq; +/* + * There is a little mess wrt which IRQ really caused this irq request. The + * main problem is that IIRQ_REG and EIRQ_REG reflect the state when they + * are read - which is long after the request came in. In theory IRQs should + * not just go away but they occassionally do + */ + if (irq>4 && irq<=15 && mext_disabled) { + /*aliased_irq++;*/ + goto iirq; + } + if (irq_tab[irq].handler == q40_defhand ) { + printk("handler for IRQ %d not defined\n",irq); + continue; /* ignore uninited INTs :-( */ + } + if ( irq_tab[irq].state & IRQ_INPROGRESS ) { + /* some handlers do local_irq_enable() for irq latency reasons, */ + /* however reentering an active irq handler is not permitted */ +#ifdef IP_USE_DISABLE + /* in theory this is the better way to do it because it still */ + /* lets through eg the serial irqs, unfortunately it crashes */ + disable_irq(irq); + disabled=1; +#else + /*printk("IRQ_INPROGRESS detected for irq %d, disabling - %s disabled\n",irq,disabled ? "already" : "not yet"); */ + fp->sr = (((fp->sr) & (~0x700))+0x200); + disabled=1; +#endif + goto iirq; + } + irq_tab[irq].count++; + irq_tab[irq].state |= IRQ_INPROGRESS; + irq_tab[irq].handler(irq,irq_tab[irq].dev_id,fp); + irq_tab[irq].state &= ~IRQ_INPROGRESS; + + /* naively enable everything, if that fails than */ + /* this function will be reentered immediately thus */ + /* getting another chance to disable the IRQ */ + + if ( disabled ) { +#ifdef IP_USE_DISABLE + if (irq>4){ + disabled=0; + enable_irq(irq);} +#else + disabled=0; + /*printk("reenabling irq %d\n",irq); */ +#endif + } +// used to do 'goto repeat;' here, this delayed bh processing too long + return IRQ_HANDLED; + } + } + if (mer && ccleirq>0 && !aliased_irq) + printk("ISA interrupt from unknown source? EIRQ_REG = %x\n",mer),ccleirq--; + } + iirq: + mir=master_inb(IIRQ_REG); + /* should test whether keyboard irq is really enabled, doing it in defhand */ + if (mir&Q40_IRQ_KEYB_MASK) { + irq_tab[Q40_IRQ_KEYBOARD].count++; + irq_tab[Q40_IRQ_KEYBOARD].handler(Q40_IRQ_KEYBOARD,irq_tab[Q40_IRQ_KEYBOARD].dev_id,fp); + } + return IRQ_HANDLED; +} + +int show_q40_interrupts (struct seq_file *p, void *v) +{ + int i; + + for (i = 0; i <= Q40_IRQ_MAX; i++) { + if (irq_tab[i].count) + seq_printf(p, "%sIRQ %02d: %8d %s%s\n", + (i<=15) ? "ISA-" : " " , + i, irq_tab[i].count, + irq_tab[i].devname[0] ? irq_tab[i].devname : "?", + irq_tab[i].handler == q40_defhand ? + " (now unassigned)" : ""); + } + return 0; +} + + +static irqreturn_t q40_defhand (int irq, void *dev_id, struct pt_regs *fp) +{ + if (irq!=Q40_IRQ_KEYBOARD) + printk ("Unknown q40 interrupt %d\n", irq); + else master_outb(-1,KEYBOARD_UNLOCK_REG); + return IRQ_NONE; +} +static irqreturn_t default_handler(int lev, void *dev_id, struct pt_regs *regs) +{ + printk ("Uninitialised interrupt level %d\n", lev); + return IRQ_NONE; +} + +irqreturn_t (*q40_default_handler[SYS_IRQS])(int, void *, struct pt_regs *) = { + [0] = default_handler, + [1] = default_handler, + [2] = default_handler, + [3] = default_handler, + [4] = default_handler, + [5] = default_handler, + [6] = default_handler, + [7] = default_handler +}; + + +void q40_enable_irq (unsigned int irq) +{ + if ( irq>=5 && irq<=15 ) + { + mext_disabled--; + if (mext_disabled>0) + printk("q40_enable_irq : nested disable/enable\n"); + if (mext_disabled==0) + master_outb(1,EXT_ENABLE_REG); + } +} + + +void q40_disable_irq (unsigned int irq) +{ + /* disable ISA iqs : only do something if the driver has been + * verified to be Q40 "compatible" - right now IDE, NE2K + * Any driver should not attempt to sleep across disable_irq !! + */ + + if ( irq>=5 && irq<=15 ) { + master_outb(0,EXT_ENABLE_REG); + mext_disabled++; + if (mext_disabled>1) printk("disable_irq nesting count %d\n",mext_disabled); + } +} + +unsigned long q40_probe_irq_on (void) +{ + printk("irq probing not working - reconfigure the driver to avoid this\n"); + return -1; +} +int q40_probe_irq_off (unsigned long irqs) +{ + return -1; +} +/* + * Local variables: + * compile-command: "m68k-linux-gcc -D__KERNEL__ -I/home/rz/lx/linux-2.2.6/include -Wall -Wstrict-prototypes -O2 -fomit-frame-pointer -pipe -fno-strength-reduce -ffixed-a2 -m68040 -c -o q40ints.o q40ints.c" + * End: + */ -- cgit v1.2.3