diff options
Diffstat (limited to 'include/uapi/linux')
38 files changed, 677 insertions, 43 deletions
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index 19e765fbfef..4e67194fd2c 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -258,6 +258,7 @@ header-y += neighbour.h header-y += net.h header-y += net_dropmon.h header-y += net_tstamp.h +header-y += netconf.h header-y += netdevice.h header-y += netfilter.h header-y += netfilter_arp.h diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index d3eaaaf1009..0c9b44871df 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -500,13 +500,26 @@ union ethtool_flow_union { struct ethtool_ah_espip4_spec esp_ip4_spec; struct ethtool_usrip4_spec usr_ip4_spec; struct ethhdr ether_spec; - __u8 hdata[60]; + __u8 hdata[52]; }; +/** + * struct ethtool_flow_ext - additional RX flow fields + * @h_dest: destination MAC address + * @vlan_etype: VLAN EtherType + * @vlan_tci: VLAN tag control information + * @data: user defined data + * + * Note, @vlan_etype, @vlan_tci, and @data are only valid if %FLOW_EXT + * is set in &struct ethtool_rx_flow_spec @flow_type. + * @h_dest is valid if %FLOW_MAC_EXT is set. + */ struct ethtool_flow_ext { - __be16 vlan_etype; - __be16 vlan_tci; - __be32 data[2]; + __u8 padding[2]; + unsigned char h_dest[ETH_ALEN]; + __be16 vlan_etype; + __be16 vlan_tci; + __be32 data[2]; }; /** @@ -517,7 +530,8 @@ struct ethtool_flow_ext { * @m_u: Masks for flow field bits to be matched * @m_ext: Masks for additional field bits to be matched * Note, all additional fields must be ignored unless @flow_type - * includes the %FLOW_EXT flag. + * includes the %FLOW_EXT or %FLOW_MAC_EXT flag + * (see &struct ethtool_flow_ext description). * @ring_cookie: RX ring/queue index to deliver to, or %RX_CLS_FLOW_DISC * if packets should be discarded * @location: Location of rule in the table. Locations must be @@ -1027,6 +1041,7 @@ enum ethtool_sfeatures_retval_bits { #define ETHER_FLOW 0x12 /* spec only (ether_spec) */ /* Flag to enable additional fields in struct ethtool_rx_flow_spec */ #define FLOW_EXT 0x80000000 +#define FLOW_MAC_EXT 0x40000000 /* L3-L4 network traffic flow hash options */ #define RXH_L2DA (1 << 1) diff --git a/include/uapi/linux/filter.h b/include/uapi/linux/filter.h index 3d7922433ab..9cfde694109 100644 --- a/include/uapi/linux/filter.h +++ b/include/uapi/linux/filter.h @@ -127,7 +127,9 @@ struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ #define SKF_AD_RXHASH 32 #define SKF_AD_CPU 36 #define SKF_AD_ALU_XOR_X 40 -#define SKF_AD_MAX 44 +#define SKF_AD_VLAN_TAG 44 +#define SKF_AD_VLAN_TAG_PRESENT 48 +#define SKF_AD_MAX 52 #define SKF_NET_OFF (-0x100000) #define SKF_LL_OFF (-0x200000) diff --git a/include/uapi/linux/hdlc/Kbuild b/include/uapi/linux/hdlc/Kbuild index aafaa5aa54d..8c1d2cb75e3 100644 --- a/include/uapi/linux/hdlc/Kbuild +++ b/include/uapi/linux/hdlc/Kbuild @@ -1 +1,2 @@ # UAPI Header export list +header-y += ioctl.h diff --git a/include/uapi/linux/hdlc/ioctl.h b/include/uapi/linux/hdlc/ioctl.h new file mode 100644 index 00000000000..04bc0274a18 --- /dev/null +++ b/include/uapi/linux/hdlc/ioctl.h @@ -0,0 +1,84 @@ +#ifndef __HDLC_IOCTL_H__ +#define __HDLC_IOCTL_H__ + + +#define GENERIC_HDLC_VERSION 4 /* For synchronization with sethdlc utility */ + +#define CLOCK_DEFAULT 0 /* Default setting */ +#define CLOCK_EXT 1 /* External TX and RX clock - DTE */ +#define CLOCK_INT 2 /* Internal TX and RX clock - DCE */ +#define CLOCK_TXINT 3 /* Internal TX and external RX clock */ +#define CLOCK_TXFROMRX 4 /* TX clock derived from external RX clock */ + + +#define ENCODING_DEFAULT 0 /* Default setting */ +#define ENCODING_NRZ 1 +#define ENCODING_NRZI 2 +#define ENCODING_FM_MARK 3 +#define ENCODING_FM_SPACE 4 +#define ENCODING_MANCHESTER 5 + + +#define PARITY_DEFAULT 0 /* Default setting */ +#define PARITY_NONE 1 /* No parity */ +#define PARITY_CRC16_PR0 2 /* CRC16, initial value 0x0000 */ +#define PARITY_CRC16_PR1 3 /* CRC16, initial value 0xFFFF */ +#define PARITY_CRC16_PR0_CCITT 4 /* CRC16, initial 0x0000, ITU-T version */ +#define PARITY_CRC16_PR1_CCITT 5 /* CRC16, initial 0xFFFF, ITU-T version */ +#define PARITY_CRC32_PR0_CCITT 6 /* CRC32, initial value 0x00000000 */ +#define PARITY_CRC32_PR1_CCITT 7 /* CRC32, initial value 0xFFFFFFFF */ + +#define LMI_DEFAULT 0 /* Default setting */ +#define LMI_NONE 1 /* No LMI, all PVCs are static */ +#define LMI_ANSI 2 /* ANSI Annex D */ +#define LMI_CCITT 3 /* ITU-T Annex A */ +#define LMI_CISCO 4 /* The "original" LMI, aka Gang of Four */ + +#ifndef __ASSEMBLY__ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; +} sync_serial_settings; /* V.35, V.24, X.21 */ + +typedef struct { + unsigned int clock_rate; /* bits per second */ + unsigned int clock_type; /* internal, external, TX-internal etc. */ + unsigned short loopback; + unsigned int slot_map; +} te1_settings; /* T1, E1 */ + +typedef struct { + unsigned short encoding; + unsigned short parity; +} raw_hdlc_proto; + +typedef struct { + unsigned int t391; + unsigned int t392; + unsigned int n391; + unsigned int n392; + unsigned int n393; + unsigned short lmi; + unsigned short dce; /* 1 for DCE (network side) operation */ +} fr_proto; + +typedef struct { + unsigned int dlci; +} fr_proto_pvc; /* for creating/deleting FR PVCs */ + +typedef struct { + unsigned int dlci; + char master[IFNAMSIZ]; /* Name of master FRAD device */ +}fr_proto_pvc_info; /* for returning PVC information only */ + +typedef struct { + unsigned int interval; + unsigned int timeout; +} cisco_proto; + +/* PPP doesn't need any info now - supply length = 0 to ioctl */ + +#endif /* __ASSEMBLY__ */ +#endif /* __HDLC_IOCTL_H__ */ diff --git a/include/uapi/linux/if_bridge.h b/include/uapi/linux/if_bridge.h index a8fe9549ddb..5db297514ae 100644 --- a/include/uapi/linux/if_bridge.h +++ b/include/uapi/linux/if_bridge.h @@ -97,5 +97,89 @@ struct __fdb_entry { __u16 unused; }; +/* Bridge Flags */ +#define BRIDGE_FLAGS_MASTER 1 /* Bridge command to/from master */ +#define BRIDGE_FLAGS_SELF 2 /* Bridge command to/from lowerdev */ + +#define BRIDGE_MODE_VEB 0 /* Default loopback mode */ +#define BRIDGE_MODE_VEPA 1 /* 802.1Qbg defined VEPA mode */ + +/* Bridge management nested attributes + * [IFLA_AF_SPEC] = { + * [IFLA_BRIDGE_FLAGS] + * [IFLA_BRIDGE_MODE] + * } + */ +enum { + IFLA_BRIDGE_FLAGS, + IFLA_BRIDGE_MODE, + __IFLA_BRIDGE_MAX, +}; +#define IFLA_BRIDGE_MAX (__IFLA_BRIDGE_MAX - 1) + +/* Bridge multicast database attributes + * [MDBA_MDB] = { + * [MDBA_MDB_ENTRY] = { + * [MDBA_MDB_ENTRY_INFO] + * } + * } + * [MDBA_ROUTER] = { + * [MDBA_ROUTER_PORT] + * } + */ +enum { + MDBA_UNSPEC, + MDBA_MDB, + MDBA_ROUTER, + __MDBA_MAX, +}; +#define MDBA_MAX (__MDBA_MAX - 1) + +enum { + MDBA_MDB_UNSPEC, + MDBA_MDB_ENTRY, + __MDBA_MDB_MAX, +}; +#define MDBA_MDB_MAX (__MDBA_MDB_MAX - 1) + +enum { + MDBA_MDB_ENTRY_UNSPEC, + MDBA_MDB_ENTRY_INFO, + __MDBA_MDB_ENTRY_MAX, +}; +#define MDBA_MDB_ENTRY_MAX (__MDBA_MDB_ENTRY_MAX - 1) + +enum { + MDBA_ROUTER_UNSPEC, + MDBA_ROUTER_PORT, + __MDBA_ROUTER_MAX, +}; +#define MDBA_ROUTER_MAX (__MDBA_ROUTER_MAX - 1) + +struct br_port_msg { + __u8 family; + __u32 ifindex; +}; + +struct br_mdb_entry { + __u32 ifindex; +#define MDB_TEMPORARY 0 +#define MDB_PERMANENT 1 + __u8 state; + struct { + union { + __be32 ip4; + struct in6_addr ip6; + } u; + __be16 proto; + } addr; +}; + +enum { + MDBA_SET_ENTRY_UNSPEC, + MDBA_SET_ENTRY, + __MDBA_SET_ENTRY_MAX, +}; +#define MDBA_SET_ENTRY_MAX (__MDBA_SET_ENTRY_MAX - 1) #endif /* _UAPI_LINUX_IF_BRIDGE_H */ diff --git a/include/uapi/linux/if_ether.h b/include/uapi/linux/if_ether.h index 0343e1f0582..67fb87ca109 100644 --- a/include/uapi/linux/if_ether.h +++ b/include/uapi/linux/if_ether.h @@ -48,6 +48,7 @@ #define ETH_P_BPQ 0x08FF /* G8BPQ AX.25 Ethernet Packet [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_IEEEPUP 0x0a00 /* Xerox IEEE802.3 PUP packet */ #define ETH_P_IEEEPUPAT 0x0a01 /* Xerox IEEE802.3 PUP Addr Trans packet */ +#define ETH_P_BATMAN 0x4305 /* B.A.T.M.A.N.-Advanced packet [ NOT AN OFFICIALLY REGISTERED ID ] */ #define ETH_P_DEC 0x6000 /* DEC Assigned proto */ #define ETH_P_DNA_DL 0x6001 /* DEC DNA Dump/Load */ #define ETH_P_DNA_RC 0x6002 /* DEC DNA Remote Console */ diff --git a/include/uapi/linux/if_link.h b/include/uapi/linux/if_link.h index 5c80cb11518..60f3b6b9060 100644 --- a/include/uapi/linux/if_link.h +++ b/include/uapi/linux/if_link.h @@ -205,6 +205,24 @@ enum { #define IFLA_INET6_MAX (__IFLA_INET6_MAX - 1) +enum { + BRIDGE_MODE_UNSPEC, + BRIDGE_MODE_HAIRPIN, +}; + +enum { + IFLA_BRPORT_UNSPEC, + IFLA_BRPORT_STATE, /* Spanning tree state */ + IFLA_BRPORT_PRIORITY, /* " priority */ + IFLA_BRPORT_COST, /* " cost */ + IFLA_BRPORT_MODE, /* mode (hairpin) */ + IFLA_BRPORT_GUARD, /* bpdu guard */ + IFLA_BRPORT_PROTECT, /* root port protection */ + IFLA_BRPORT_FAST_LEAVE, /* multicast fast leave */ + __IFLA_BRPORT_MAX +}; +#define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) + struct ifla_cacheinfo { __u32 max_reasm_len; __u32 tstamp; /* ipv6InterfaceTable updated timestamp */ @@ -285,6 +303,10 @@ enum { IFLA_VXLAN_AGEING, IFLA_VXLAN_LIMIT, IFLA_VXLAN_PORT_RANGE, + IFLA_VXLAN_PROXY, + IFLA_VXLAN_RSC, + IFLA_VXLAN_L2MISS, + IFLA_VXLAN_L3MISS, __IFLA_VXLAN_MAX }; #define IFLA_VXLAN_MAX (__IFLA_VXLAN_MAX - 1) diff --git a/include/uapi/linux/if_packet.h b/include/uapi/linux/if_packet.h index f3799295d23..f9a60375f0d 100644 --- a/include/uapi/linux/if_packet.h +++ b/include/uapi/linux/if_packet.h @@ -50,6 +50,7 @@ struct sockaddr_ll { #define PACKET_TX_TIMESTAMP 16 #define PACKET_TIMESTAMP 17 #define PACKET_FANOUT 18 +#define PACKET_TX_HAS_OFF 19 #define PACKET_FANOUT_HASH 0 #define PACKET_FANOUT_LB 1 diff --git a/include/uapi/linux/if_tun.h b/include/uapi/linux/if_tun.h index 25a585ce23e..2835b85fd46 100644 --- a/include/uapi/linux/if_tun.h +++ b/include/uapi/linux/if_tun.h @@ -31,9 +31,11 @@ #define TUN_FASYNC 0x0010 #define TUN_NOCHECKSUM 0x0020 #define TUN_NO_PI 0x0040 +/* This flag has no real effect */ #define TUN_ONE_QUEUE 0x0080 #define TUN_PERSIST 0x0100 #define TUN_VNET_HDR 0x0200 +#define TUN_TAP_MQ 0x0400 /* Ioctl defines */ #define TUNSETNOCSUM _IOW('T', 200, int) @@ -53,14 +55,19 @@ #define TUNDETACHFILTER _IOW('T', 214, struct sock_fprog) #define TUNGETVNETHDRSZ _IOR('T', 215, int) #define TUNSETVNETHDRSZ _IOW('T', 216, int) +#define TUNSETQUEUE _IOW('T', 217, int) /* TUNSETIFF ifr flags */ #define IFF_TUN 0x0001 #define IFF_TAP 0x0002 #define IFF_NO_PI 0x1000 +/* This flag has no real effect */ #define IFF_ONE_QUEUE 0x2000 #define IFF_VNET_HDR 0x4000 #define IFF_TUN_EXCL 0x8000 +#define IFF_MULTI_QUEUE 0x0100 +#define IFF_ATTACH_QUEUE 0x0200 +#define IFF_DETACH_QUEUE 0x0400 /* Features for GSO (TUNSETOFFLOAD). */ #define TUN_F_CSUM 0x01 /* You can hand me unchecksummed packets. */ diff --git a/include/uapi/linux/if_tunnel.h b/include/uapi/linux/if_tunnel.h index 5db5942575f..aee73d0611f 100644 --- a/include/uapi/linux/if_tunnel.h +++ b/include/uapi/linux/if_tunnel.h @@ -37,6 +37,26 @@ struct ip_tunnel_parm { struct iphdr iph; }; +enum { + IFLA_IPTUN_UNSPEC, + IFLA_IPTUN_LINK, + IFLA_IPTUN_LOCAL, + IFLA_IPTUN_REMOTE, + IFLA_IPTUN_TTL, + IFLA_IPTUN_TOS, + IFLA_IPTUN_ENCAP_LIMIT, + IFLA_IPTUN_FLOWINFO, + IFLA_IPTUN_FLAGS, + IFLA_IPTUN_PROTO, + IFLA_IPTUN_PMTUDISC, + IFLA_IPTUN_6RD_PREFIX, + IFLA_IPTUN_6RD_RELAY_PREFIX, + IFLA_IPTUN_6RD_PREFIXLEN, + IFLA_IPTUN_6RD_RELAY_PREFIXLEN, + __IFLA_IPTUN_MAX, +}; +#define IFLA_IPTUN_MAX (__IFLA_IPTUN_MAX - 1) + /* SIT-mode i_flags */ #define SIT_ISATAP 0x0001 diff --git a/include/uapi/linux/in6.h b/include/uapi/linux/in6.h index 1e315998995..f79c3721da6 100644 --- a/include/uapi/linux/in6.h +++ b/include/uapi/linux/in6.h @@ -240,6 +240,7 @@ struct in6_flowlabel_req { * * IP6T_SO_GET_REVISION_MATCH 68 * IP6T_SO_GET_REVISION_TARGET 69 + * IP6T_SO_ORIGINAL_DST 80 */ /* RFC5014: Source address selection */ diff --git a/include/uapi/linux/inet_diag.h b/include/uapi/linux/inet_diag.h index 8c469af939a..bbde90fa583 100644 --- a/include/uapi/linux/inet_diag.h +++ b/include/uapi/linux/inet_diag.h @@ -109,9 +109,10 @@ enum { INET_DIAG_TOS, INET_DIAG_TCLASS, INET_DIAG_SKMEMINFO, + INET_DIAG_SHUTDOWN, }; -#define INET_DIAG_MAX INET_DIAG_SKMEMINFO +#define INET_DIAG_MAX INET_DIAG_SHUTDOWN /* INET_DIAG_MEM */ diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h index 558828590a6..935119c698a 100644 --- a/include/uapi/linux/input.h +++ b/include/uapi/linux/input.h @@ -851,6 +851,7 @@ struct input_keymap_entry { #define MSC_GESTURE 0x02 #define MSC_RAW 0x03 #define MSC_SCAN 0x04 +#define MSC_TIMESTAMP 0x05 #define MSC_MAX 0x07 #define MSC_CNT (MSC_MAX+1) diff --git a/include/uapi/linux/ipv6.h b/include/uapi/linux/ipv6.h index a6d7d1c536c..5a2991cf025 100644 --- a/include/uapi/linux/ipv6.h +++ b/include/uapi/linux/ipv6.h @@ -157,6 +157,7 @@ enum { DEVCONF_DISABLE_IPV6, DEVCONF_ACCEPT_DAD, DEVCONF_FORCE_TLLAO, + DEVCONF_NDISC_NOTIFY, DEVCONF_MAX }; diff --git a/include/uapi/linux/ipv6_route.h b/include/uapi/linux/ipv6_route.h index 0459664c263..2be7bd17475 100644 --- a/include/uapi/linux/ipv6_route.h +++ b/include/uapi/linux/ipv6_route.h @@ -55,4 +55,7 @@ struct in6_rtmsg { #define RTMSG_NEWROUTE 0x21 #define RTMSG_DELROUTE 0x22 +#define IP6_RT_PRIO_USER 1024 +#define IP6_RT_PRIO_ADDRCONF 256 + #endif /* _UAPI_LINUX_IPV6_ROUTE_H */ diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 0a6d6ba44c8..e6e5d4b1370 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -167,10 +167,15 @@ struct kvm_pit_config { #define KVM_EXIT_OSI 18 #define KVM_EXIT_PAPR_HCALL 19 #define KVM_EXIT_S390_UCONTROL 20 +#define KVM_EXIT_WATCHDOG 21 /* For KVM_EXIT_INTERNAL_ERROR */ -#define KVM_INTERNAL_ERROR_EMULATION 1 -#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Emulate instruction failed. */ +#define KVM_INTERNAL_ERROR_EMULATION 1 +/* Encounter unexpected simultaneous exceptions. */ +#define KVM_INTERNAL_ERROR_SIMUL_EX 2 +/* Encounter unexpected vm-exit due to delivery event. */ +#define KVM_INTERNAL_ERROR_DELIVERY_EV 3 /* for KVM_RUN, returned by mmap(vcpu_fd, offset=0) */ struct kvm_run { @@ -477,6 +482,8 @@ struct kvm_ppc_smmu_info { struct kvm_ppc_one_seg_page_size sps[KVM_PPC_PAGE_SIZES_MAX_SZ]; }; +#define KVM_PPC_PVINFO_FLAGS_EV_IDLE (1<<0) + #define KVMIO 0xAE /* machine type bits, to be used as argument to KVM_CREATE_VM */ @@ -626,6 +633,8 @@ struct kvm_ppc_smmu_info { #define KVM_CAP_READONLY_MEM 81 #endif #define KVM_CAP_IRQFD_RESAMPLE 82 +#define KVM_CAP_PPC_BOOKE_WATCHDOG 83 +#define KVM_CAP_PPC_HTAB_FD 84 #ifdef KVM_CAP_IRQ_ROUTING @@ -848,6 +857,11 @@ struct kvm_s390_ucas_mapping { #define KVM_PPC_GET_SMMU_INFO _IOR(KVMIO, 0xa6, struct kvm_ppc_smmu_info) /* Available with KVM_CAP_PPC_ALLOC_HTAB */ #define KVM_PPC_ALLOCATE_HTAB _IOWR(KVMIO, 0xa7, __u32) +#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) +/* Available with KVM_CAP_RMA */ +#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) +/* Available with KVM_CAP_PPC_HTAB_FD */ +#define KVM_PPC_GET_HTAB_FD _IOW(KVMIO, 0xaa, struct kvm_get_htab_fd) /* * ioctls for vcpu fds @@ -911,9 +925,6 @@ struct kvm_s390_ucas_mapping { /* Available with KVM_CAP_XCRS */ #define KVM_GET_XCRS _IOR(KVMIO, 0xa6, struct kvm_xcrs) #define KVM_SET_XCRS _IOW(KVMIO, 0xa7, struct kvm_xcrs) -#define KVM_CREATE_SPAPR_TCE _IOW(KVMIO, 0xa8, struct kvm_create_spapr_tce) -/* Available with KVM_CAP_RMA */ -#define KVM_ALLOCATE_RMA _IOR(KVMIO, 0xa9, struct kvm_allocate_rma) /* Available with KVM_CAP_SW_TLB */ #define KVM_DIRTY_TLB _IOW(KVMIO, 0xaa, struct kvm_dirty_tlb) /* Available with KVM_CAP_ONE_REG */ diff --git a/include/uapi/linux/magic.h b/include/uapi/linux/magic.h index e15192cb9cf..873e086ce3a 100644 --- a/include/uapi/linux/magic.h +++ b/include/uapi/linux/magic.h @@ -23,10 +23,12 @@ #define EXT4_SUPER_MAGIC 0xEF53 #define BTRFS_SUPER_MAGIC 0x9123683E #define NILFS_SUPER_MAGIC 0x3434 +#define F2FS_SUPER_MAGIC 0xF2F52010 #define HPFS_SUPER_MAGIC 0xf995e849 #define ISOFS_SUPER_MAGIC 0x9660 #define JFFS2_SUPER_MAGIC 0x72b6 #define PSTOREFS_MAGIC 0x6165676C +#define EFIVARFS_MAGIC 0xde5e81e4 #define MINIX_SUPER_MAGIC 0x137F /* minix v1 fs, 14 char names */ #define MINIX_SUPER_MAGIC2 0x138F /* minix v1 fs, 30 char names */ diff --git a/include/uapi/linux/mempolicy.h b/include/uapi/linux/mempolicy.h index 23e62e0537e..0d11c3dcd3a 100644 --- a/include/uapi/linux/mempolicy.h +++ b/include/uapi/linux/mempolicy.h @@ -20,6 +20,7 @@ enum { MPOL_PREFERRED, MPOL_BIND, MPOL_INTERLEAVE, + MPOL_LOCAL, MPOL_MAX, /* always last member of enum */ }; @@ -47,9 +48,15 @@ enum mpol_rebind_step { /* Flags for mbind */ #define MPOL_MF_STRICT (1<<0) /* Verify existing pages in the mapping */ -#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform to mapping */ -#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to mapping */ -#define MPOL_MF_INTERNAL (1<<3) /* Internal flags start here */ +#define MPOL_MF_MOVE (1<<1) /* Move pages owned by this process to conform + to policy */ +#define MPOL_MF_MOVE_ALL (1<<2) /* Move every page to conform to policy */ +#define MPOL_MF_LAZY (1<<3) /* Modifies '_MOVE: lazy migrate on fault */ +#define MPOL_MF_INTERNAL (1<<4) /* Internal flags start here */ + +#define MPOL_MF_VALID (MPOL_MF_STRICT | \ + MPOL_MF_MOVE | \ + MPOL_MF_MOVE_ALL) /* * Internal flags that share the struct mempolicy flags word with @@ -59,6 +66,8 @@ enum mpol_rebind_step { #define MPOL_F_SHARED (1 << 0) /* identify shared policies */ #define MPOL_F_LOCAL (1 << 1) /* preferred local allocation */ #define MPOL_F_REBINDING (1 << 2) /* identify policies in rebinding */ +#define MPOL_F_MOF (1 << 3) /* this policy wants migrate on fault */ +#define MPOL_F_MORON (1 << 4) /* Migrate On pte_numa Reference On Node */ #endif /* _UAPI_LINUX_MEMPOLICY_H */ diff --git a/include/uapi/linux/module.h b/include/uapi/linux/module.h new file mode 100644 index 00000000000..38da4258b12 --- /dev/null +++ b/include/uapi/linux/module.h @@ -0,0 +1,8 @@ +#ifndef _UAPI_LINUX_MODULE_H +#define _UAPI_LINUX_MODULE_H + +/* Flags for sys_finit_module: */ +#define MODULE_INIT_IGNORE_MODVERSIONS 1 +#define MODULE_INIT_IGNORE_VERMAGIC 2 + +#endif /* _UAPI_LINUX_MODULE_H */ diff --git a/include/uapi/linux/netconf.h b/include/uapi/linux/netconf.h new file mode 100644 index 00000000000..64804a798b0 --- /dev/null +++ b/include/uapi/linux/netconf.h @@ -0,0 +1,24 @@ +#ifndef _UAPI_LINUX_NETCONF_H_ +#define _UAPI_LINUX_NETCONF_H_ + +#include <linux/types.h> +#include <linux/netlink.h> + +struct netconfmsg { + __u8 ncm_family; +}; + +enum { + NETCONFA_UNSPEC, + NETCONFA_IFINDEX, + NETCONFA_FORWARDING, + NETCONFA_RP_FILTER, + NETCONFA_MC_FORWARDING, + __NETCONFA_MAX +}; +#define NETCONFA_MAX (__NETCONFA_MAX - 1) + +#define NETCONFA_IFINDEX_ALL -1 +#define NETCONFA_IFINDEX_DEFAULT -2 + +#endif /* _UAPI_LINUX_NETCONF_H_ */ diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h index 43bfe3e1685..86e930cf3df 100644 --- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h +++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h @@ -9,6 +9,8 @@ enum cntl_msg_types { IPCTNL_MSG_CT_GET_CTRZERO, IPCTNL_MSG_CT_GET_STATS_CPU, IPCTNL_MSG_CT_GET_STATS, + IPCTNL_MSG_CT_GET_DYING, + IPCTNL_MSG_CT_GET_UNCONFIRMED, IPCTNL_MSG_MAX }; diff --git a/include/uapi/linux/netfilter_ipv6/ip6_tables.h b/include/uapi/linux/netfilter_ipv6/ip6_tables.h index bf1ef65cc58..649c68062dc 100644 --- a/include/uapi/linux/netfilter_ipv6/ip6_tables.h +++ b/include/uapi/linux/netfilter_ipv6/ip6_tables.h @@ -178,6 +178,9 @@ struct ip6t_error { #define IP6T_SO_GET_REVISION_TARGET (IP6T_BASE_CTL + 5) #define IP6T_SO_GET_MAX IP6T_SO_GET_REVISION_TARGET +/* obtain original address if REDIRECT'd connection */ +#define IP6T_SO_ORIGINAL_DST 80 + /* ICMP matching stuff */ struct ip6t_icmp { __u8 type; /* type to match */ diff --git a/include/uapi/linux/nfc.h b/include/uapi/linux/nfc.h index d908d17da56..0e63cee8d81 100644 --- a/include/uapi/linux/nfc.h +++ b/include/uapi/linux/nfc.h @@ -60,6 +60,13 @@ * target mode. * @NFC_EVENT_DEVICE_DEACTIVATED: event emitted when the adapter is deactivated * from target mode. + * @NFC_CMD_LLC_GET_PARAMS: request LTO, RW, and MIUX parameters for a device + * @NFC_CMD_LLC_SET_PARAMS: set one or more of LTO, RW, and MIUX parameters for + * a device. LTO must be set before the link is up otherwise -EINPROGRESS + * is returned. RW and MIUX can be set at anytime and will be passed in + * subsequent CONNECT and CC messages. + * If one of the passed parameters is wrong none is set and -EINVAL is + * returned. */ enum nfc_commands { NFC_CMD_UNSPEC, @@ -77,6 +84,8 @@ enum nfc_commands { NFC_EVENT_TARGET_LOST, NFC_EVENT_TM_ACTIVATED, NFC_EVENT_TM_DEACTIVATED, + NFC_CMD_LLC_GET_PARAMS, + NFC_CMD_LLC_SET_PARAMS, /* private: internal use only */ __NFC_CMD_AFTER_LAST }; @@ -102,6 +111,9 @@ enum nfc_commands { * @NFC_ATTR_RF_MODE: Initiator or target * @NFC_ATTR_IM_PROTOCOLS: Initiator mode protocols to poll for * @NFC_ATTR_TM_PROTOCOLS: Target mode protocols to listen for + * @NFC_ATTR_LLC_PARAM_LTO: Link TimeOut parameter + * @NFC_ATTR_LLC_PARAM_RW: Receive Window size parameter + * @NFC_ATTR_LLC_PARAM_MIUX: MIU eXtension parameter */ enum nfc_attrs { NFC_ATTR_UNSPEC, @@ -119,6 +131,9 @@ enum nfc_attrs { NFC_ATTR_DEVICE_POWERED, NFC_ATTR_IM_PROTOCOLS, NFC_ATTR_TM_PROTOCOLS, + NFC_ATTR_LLC_PARAM_LTO, + NFC_ATTR_LLC_PARAM_RW, + NFC_ATTR_LLC_PARAM_MIUX, /* private: internal use only */ __NFC_ATTR_AFTER_LAST }; diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 7df9b500c80..e3e19f8b16f 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -118,8 +118,9 @@ * to get a list of all present wiphys. * @NL80211_CMD_SET_WIPHY: set wiphy parameters, needs %NL80211_ATTR_WIPHY or * %NL80211_ATTR_IFINDEX; can be used to set %NL80211_ATTR_WIPHY_NAME, - * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ, - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE, %NL80211_ATTR_WIPHY_RETRY_SHORT, + * %NL80211_ATTR_WIPHY_TXQ_PARAMS, %NL80211_ATTR_WIPHY_FREQ (and the + * attributes determining the channel width; this is used for setting + * monitor mode channel), %NL80211_ATTR_WIPHY_RETRY_SHORT, * %NL80211_ATTR_WIPHY_RETRY_LONG, %NL80211_ATTR_WIPHY_FRAG_THRESHOLD, * and/or %NL80211_ATTR_WIPHY_RTS_THRESHOLD. * However, for setting the channel, see %NL80211_CMD_SET_CHANNEL @@ -171,7 +172,7 @@ * %NL80211_ATTR_AKM_SUITES, %NL80211_ATTR_PRIVACY, * %NL80211_ATTR_AUTH_TYPE and %NL80211_ATTR_INACTIVITY_TIMEOUT. * The channel to use can be set on the interface or be given using the - * %NL80211_ATTR_WIPHY_FREQ and %NL80211_ATTR_WIPHY_CHANNEL_TYPE attrs. + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel width. * @NL80211_CMD_NEW_BEACON: old alias for %NL80211_CMD_START_AP * @NL80211_CMD_STOP_AP: Stop AP operation on the given interface * @NL80211_CMD_DEL_BEACON: old alias for %NL80211_CMD_STOP_AP @@ -401,8 +402,7 @@ * a response while being associated to an AP on another channel. * %NL80211_ATTR_IFINDEX is used to specify which interface (and thus * radio) is used. %NL80211_ATTR_WIPHY_FREQ is used to specify the - * frequency for the operation and %NL80211_ATTR_WIPHY_CHANNEL_TYPE may be - * optionally used to specify additional channel parameters. + * frequency for the operation. * %NL80211_ATTR_DURATION is used to specify the duration in milliseconds * to remain on the channel. This command is also used as an event to * notify when the requested duration starts (it may take a while for the @@ -440,12 +440,11 @@ * as an event indicating reception of a frame that was not processed in * kernel code, but is for us (i.e., which may need to be processed in a * user space application). %NL80211_ATTR_FRAME is used to specify the - * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ (and - * optionally %NL80211_ATTR_WIPHY_CHANNEL_TYPE) is used to indicate on - * which channel the frame is to be transmitted or was received. If this - * channel is not the current channel (remain-on-channel or the - * operational channel) the device will switch to the given channel and - * transmit the frame, optionally waiting for a response for the time + * frame contents (including header). %NL80211_ATTR_WIPHY_FREQ is used + * to indicate on which channel the frame is to be transmitted or was + * received. If this channel is not the current channel (remain-on-channel + * or the operational channel) the device will switch to the given channel + * and transmit the frame, optionally waiting for a response for the time * specified using %NL80211_ATTR_DURATION. When called, this operation * returns a cookie (%NL80211_ATTR_COOKIE) that will be included with the * TX status event pertaining to the TX request. @@ -473,8 +472,8 @@ * command is used as an event to indicate the that a trigger level was * reached. * @NL80211_CMD_SET_CHANNEL: Set the channel (using %NL80211_ATTR_WIPHY_FREQ - * and %NL80211_ATTR_WIPHY_CHANNEL_TYPE) the given interface (identifed - * by %NL80211_ATTR_IFINDEX) shall operate on. + * and the attributes determining channel width) the given interface + * (identifed by %NL80211_ATTR_IFINDEX) shall operate on. * In case multiple channels are supported by the device, the mechanism * with which it switches channels is implementation-defined. * When a monitor interface is given, it can only switch channel while @@ -526,6 +525,12 @@ * of PMKSA caching dandidates. * * @NL80211_CMD_TDLS_OPER: Perform a high-level TDLS command (e.g. link setup). + * In addition, this can be used as an event to request userspace to take + * actions on TDLS links (set up a new link or tear down an existing one). + * In such events, %NL80211_ATTR_TDLS_OPERATION indicates the requested + * operation, %NL80211_ATTR_MAC contains the peer MAC address, and + * %NL80211_ATTR_REASON_CODE the reason code to be used (only with + * %NL80211_TDLS_TEARDOWN). * @NL80211_CMD_TDLS_MGMT: Send a TDLS management frame. * * @NL80211_CMD_UNEXPECTED_FRAME: Used by an application controlling an AP @@ -562,8 +567,8 @@ * * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels * independently of the userspace SME, send this event indicating - * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with - * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the + * attributes determining channel width. * * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by * its %NL80211_ATTR_WDEV identifier. It must have been created with @@ -578,6 +583,9 @@ * station, due to particular reason. %NL80211_ATTR_CONN_FAILED_REASON * is used for this. * + * @NL80211_CMD_SET_MCAST_RATE: Change the rate used to send multicast frames + * for IBSS or MESH vif. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -726,6 +734,8 @@ enum nl80211_commands { NL80211_CMD_CONN_FAILED, + NL80211_CMD_SET_MCAST_RATE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -762,14 +772,26 @@ enum nl80211_commands { * /sys/class/ieee80211/<phyname>/index * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters - * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz + * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz, + * defines the channel together with the (deprecated) + * %NL80211_ATTR_WIPHY_CHANNEL_TYPE attribute or the attributes + * %NL80211_ATTR_CHANNEL_WIDTH and if needed %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 + * @NL80211_ATTR_CHANNEL_WIDTH: u32 attribute containing one of the values + * of &enum nl80211_chan_width, describing the channel width. See the + * documentation of the enum for more information. + * @NL80211_ATTR_CENTER_FREQ1: Center frequency of the first part of the + * channel, used for anything but 20 MHz bandwidth + * @NL80211_ATTR_CENTER_FREQ2: Center frequency of the second part of the + * channel, used only for 80+80 MHz bandwidth * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ - * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): + * if HT20 or HT40 are to be used (i.e., HT disabled if not included): * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including * this attribute) * NL80211_CHAN_HT20 = HT20 only * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel + * This attribute is now deprecated. * @NL80211_ATTR_WIPHY_RETRY_SHORT: TX retry limit for frames whose length is * less than or equal to the RTS threshold; allowed range: 1..255; * dot11ShortRetryLimit; u8 @@ -1273,6 +1295,21 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * + * @NL80211_ATTR_SAE_DATA: SAE elements in Authentication frames. This starts + * with the Authentication transaction sequence number field. + * + * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from + * association request when used with NL80211_CMD_NEW_STATION) + * + * @NL80211_ATTR_SCAN_FLAGS: scan request control flags (u32) + * + * @NL80211_ATTR_P2P_CTWINDOW: P2P GO Client Traffic Window (u8), used with + * the START_AP and SET_BSS commands + * @NL80211_ATTR_P2P_OPPPS: P2P GO opportunistic PS (u8), used with the + * START_AP and SET_BSS commands. This can have the values 0 or 1; + * if not given in START_AP 0 is assumed, if not given in SET_BSS + * no change is made. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1530,6 +1567,19 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, + NL80211_ATTR_SAE_DATA, + + NL80211_ATTR_VHT_CAPABILITY, + + NL80211_ATTR_SCAN_FLAGS, + + NL80211_ATTR_CHANNEL_WIDTH, + NL80211_ATTR_CENTER_FREQ1, + NL80211_ATTR_CENTER_FREQ2, + + NL80211_ATTR_P2P_CTWINDOW, + NL80211_ATTR_P2P_OPPPS, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -1573,6 +1623,7 @@ enum nl80211_attrs { #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 #define NL80211_HT_CAPABILITY_LEN 26 +#define NL80211_VHT_CAPABILITY_LEN 12 #define NL80211_MAX_NR_CIPHER_SUITES 5 #define NL80211_MAX_NR_AKM_SUITES 2 @@ -1693,10 +1744,15 @@ struct nl80211_sta_flag_update { * @__NL80211_RATE_INFO_INVALID: attribute number 0 is reserved * @NL80211_RATE_INFO_BITRATE: total bitrate (u16, 100kbit/s) * @NL80211_RATE_INFO_MCS: mcs index for 802.11n (u8) - * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 Mhz dualchannel bitrate + * @NL80211_RATE_INFO_40_MHZ_WIDTH: 40 MHz dualchannel bitrate * @NL80211_RATE_INFO_SHORT_GI: 400ns guard interval * @NL80211_RATE_INFO_BITRATE32: total bitrate (u32, 100kbit/s) * @NL80211_RATE_INFO_MAX: highest rate_info number currently defined + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate + * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate * @__NL80211_RATE_INFO_AFTER_LAST: internal use */ enum nl80211_rate_info { @@ -1706,6 +1762,11 @@ enum nl80211_rate_info { NL80211_RATE_INFO_40_MHZ_WIDTH, NL80211_RATE_INFO_SHORT_GI, NL80211_RATE_INFO_BITRATE32, + NL80211_RATE_INFO_VHT_MCS, + NL80211_RATE_INFO_VHT_NSS, + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, /* keep last */ __NL80211_RATE_INFO_AFTER_LAST, @@ -2414,6 +2475,15 @@ enum nl80211_ac { #define NL80211_TXQ_Q_BE NL80211_AC_BE #define NL80211_TXQ_Q_BK NL80211_AC_BK +/** + * enum nl80211_channel_type - channel type + * @NL80211_CHAN_NO_HT: 20 MHz, non-HT channel + * @NL80211_CHAN_HT20: 20 MHz HT channel + * @NL80211_CHAN_HT40MINUS: HT40 channel, secondary channel + * below the control channel + * @NL80211_CHAN_HT40PLUS: HT40 channel, secondary channel + * above the control channel + */ enum nl80211_channel_type { NL80211_CHAN_NO_HT, NL80211_CHAN_HT20, @@ -2422,6 +2492,32 @@ enum nl80211_channel_type { }; /** + * enum nl80211_chan_width - channel width definitions + * + * These values are used with the %NL80211_ATTR_CHANNEL_WIDTH + * attribute. + * + * @NL80211_CHAN_WIDTH_20_NOHT: 20 MHz, non-HT channel + * @NL80211_CHAN_WIDTH_20: 20 MHz HT channel + * @NL80211_CHAN_WIDTH_40: 40 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80: 80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + * @NL80211_CHAN_WIDTH_80P80: 80+80 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * and %NL80211_ATTR_CENTER_FREQ2 attributes must be provided as well + * @NL80211_CHAN_WIDTH_160: 160 MHz channel, the %NL80211_ATTR_CENTER_FREQ1 + * attribute must be provided as well + */ +enum nl80211_chan_width { + NL80211_CHAN_WIDTH_20_NOHT, + NL80211_CHAN_WIDTH_20, + NL80211_CHAN_WIDTH_40, + NL80211_CHAN_WIDTH_80, + NL80211_CHAN_WIDTH_80P80, + NL80211_CHAN_WIDTH_160, +}; + +/** * enum nl80211_bss - netlink attributes for a BSS * * @__NL80211_BSS_INVALID: invalid @@ -2489,6 +2585,7 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_SHARED_KEY: Shared Key authentication (WEP only) * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) + * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by @@ -2500,6 +2597,7 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_SHARED_KEY, NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, + NL80211_AUTHTYPE_SAE, /* keep last */ __NL80211_AUTHTYPE_NUM, @@ -3028,6 +3126,20 @@ enum nl80211_ap_sme_features { * in the interface combinations, even when it's only used for scan * and remain-on-channel. This could be due to, for example, the * remain-on-channel implementation requiring a channel context. + * @NL80211_FEATURE_SAE: This driver supports simultaneous authentication of + * equals (SAE) with user space SME (NL80211_CMD_AUTHENTICATE) in station + * mode + * @NL80211_FEATURE_LOW_PRIORITY_SCAN: This driver supports low priority scan + * @NL80211_FEATURE_SCAN_FLUSH: Scan flush is supported + * @NL80211_FEATURE_AP_SCAN: Support scanning using an AP vif + * @NL80211_FEATURE_VIF_TXPOWER: The driver supports per-vif TX power setting + * @NL80211_FEATURE_NEED_OBSS_SCAN: The driver expects userspace to perform + * OBSS scans and generate 20/40 BSS coex reports. This flag is used only + * for drivers implementing the CONNECT API, for AUTH/ASSOC it is implied. + * @NL80211_FEATURE_P2P_GO_CTWIN: P2P GO implementation supports CT Window + * setting + * @NL80211_FEATURE_P2P_GO_OPPPS: P2P GO implementation supports opportunistic + * powersave */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3035,6 +3147,14 @@ enum nl80211_feature_flags { NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, + NL80211_FEATURE_SAE = 1 << 5, + NL80211_FEATURE_LOW_PRIORITY_SCAN = 1 << 6, + NL80211_FEATURE_SCAN_FLUSH = 1 << 7, + NL80211_FEATURE_AP_SCAN = 1 << 8, + NL80211_FEATURE_VIF_TXPOWER = 1 << 9, + NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, + NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, + NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, }; /** @@ -3069,4 +3189,25 @@ enum nl80211_connect_failed_reason { NL80211_CONN_FAIL_BLOCKED_CLIENT, }; +/** + * enum nl80211_scan_flags - scan request control flags + * + * Scan request control flags are used to control the handling + * of NL80211_CMD_TRIGGER_SCAN and NL80211_CMD_START_SCHED_SCAN + * requests. + * + * @NL80211_SCAN_FLAG_LOW_PRIORITY: scan request has low priority + * @NL80211_SCAN_FLAG_FLUSH: flush cache before scanning + * @NL80211_SCAN_FLAG_AP: force a scan even if the interface is configured + * as AP and the beaconing has already been configured. This attribute is + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed + */ +enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/include/uapi/linux/pci_regs.h b/include/uapi/linux/pci_regs.h index 20ae747ddf3..6b7b6f1e2fd 100644 --- a/include/uapi/linux/pci_regs.h +++ b/include/uapi/linux/pci_regs.h @@ -349,7 +349,7 @@ #define PCI_AF_STATUS_TP 0x01 #define PCI_CAP_AF_SIZEOF 6 /* size of AF registers */ -/* PCI-X registers */ +/* PCI-X registers (Type 0 (non-bridge) devices) */ #define PCI_X_CMD 2 /* Modes & Features */ #define PCI_X_CMD_DPERR_E 0x0001 /* Data Parity Error Recovery Enable */ @@ -389,6 +389,19 @@ #define PCI_CAP_PCIX_SIZEOF_V1 24 /* size for Version 1 */ #define PCI_CAP_PCIX_SIZEOF_V2 PCI_CAP_PCIX_SIZEOF_V1 /* Same for v2 */ +/* PCI-X registers (Type 1 (bridge) devices) */ + +#define PCI_X_BRIDGE_SSTATUS 2 /* Secondary Status */ +#define PCI_X_SSTATUS_64BIT 0x0001 /* Secondary AD interface is 64 bits */ +#define PCI_X_SSTATUS_133MHZ 0x0002 /* 133 MHz capable */ +#define PCI_X_SSTATUS_FREQ 0x03c0 /* Secondary Bus Mode and Frequency */ +#define PCI_X_SSTATUS_VERS 0x3000 /* PCI-X Capability Version */ +#define PCI_X_SSTATUS_V1 0x1000 /* Mode 2, not Mode 1 */ +#define PCI_X_SSTATUS_V2 0x2000 /* Mode 1 or Modes 1 and 2 */ +#define PCI_X_SSTATUS_266MHZ 0x4000 /* 266 MHz capable */ +#define PCI_X_SSTATUS_533MHZ 0x8000 /* 533 MHz capable */ +#define PCI_X_BRIDGE_STATUS 4 /* Bridge Status */ + /* PCI Bridge Subsystem ID registers */ #define PCI_SSVID_VENDOR_ID 4 /* PCI-Bridge subsystem vendor id register */ @@ -456,6 +469,8 @@ #define PCI_EXP_LNKCAP_PN 0xff000000 /* Port Number */ #define PCI_EXP_LNKCTL 16 /* Link Control */ #define PCI_EXP_LNKCTL_ASPMC 0x0003 /* ASPM Control */ +#define PCI_EXP_LNKCTL_ASPM_L0S 0x01 /* L0s Enable */ +#define PCI_EXP_LNKCTL_ASPM_L1 0x02 /* L1 Enable */ #define PCI_EXP_LNKCTL_RCB 0x0008 /* Read Completion Boundary */ #define PCI_EXP_LNKCTL_LD 0x0010 /* Link Disable */ #define PCI_EXP_LNKCTL_RL 0x0020 /* Retrain Link */ @@ -544,9 +559,9 @@ #define PCI_EXP_OBFF_WAKE_EN 0x6000 /* OBFF using WAKE# signaling */ #define PCI_CAP_EXP_ENDPOINT_SIZEOF_V2 44 /* v2 endpoints end here */ #define PCI_EXP_LNKCAP2 44 /* Link Capability 2 */ -#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x01 /* Current Link Speed 2.5GT/s */ -#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x02 /* Current Link Speed 5.0GT/s */ -#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x04 /* Current Link Speed 8.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_2_5GB 0x02 /* Supported Link Speed 2.5GT/s */ +#define PCI_EXP_LNKCAP2_SLS_5_0GB 0x04 /* Supported Link Speed 5.0GT/s */ +#define PCI_EXP_LNKCAP2_SLS_8_0GB 0x08 /* Supported Link Speed 8.0GT/s */ #define PCI_EXP_LNKCAP2_CROSSLINK 0x100 /* Crosslink supported */ #define PCI_EXP_LNKCTL2 48 /* Link Control 2 */ #define PCI_EXP_LNKSTA2 50 /* Link Status 2 */ diff --git a/include/uapi/linux/ptp_clock.h b/include/uapi/linux/ptp_clock.h index 94e981f810a..b65c834f83e 100644 --- a/include/uapi/linux/ptp_clock.h +++ b/include/uapi/linux/ptp_clock.h @@ -67,12 +67,26 @@ struct ptp_perout_request { unsigned int rsv[4]; /* Reserved for future use. */ }; +#define PTP_MAX_SAMPLES 25 /* Maximum allowed offset measurement samples. */ + +struct ptp_sys_offset { + unsigned int n_samples; /* Desired number of measurements. */ + unsigned int rsv[3]; /* Reserved for future use. */ + /* + * Array of interleaved system/phc time stamps. The kernel + * will provide 2*n_samples + 1 time stamps, with the last + * one as a system time stamp. + */ + struct ptp_clock_time ts[2 * PTP_MAX_SAMPLES + 1]; +}; + #define PTP_CLK_MAGIC '=' #define PTP_CLOCK_GETCAPS _IOR(PTP_CLK_MAGIC, 1, struct ptp_clock_caps) #define PTP_EXTTS_REQUEST _IOW(PTP_CLK_MAGIC, 2, struct ptp_extts_request) #define PTP_PEROUT_REQUEST _IOW(PTP_CLK_MAGIC, 3, struct ptp_perout_request) #define PTP_ENABLE_PPS _IOW(PTP_CLK_MAGIC, 4, int) +#define PTP_SYS_OFFSET _IOW(PTP_CLK_MAGIC, 5, struct ptp_sys_offset) struct ptp_extts_event { struct ptp_clock_time t; /* Time event occured. */ diff --git a/include/uapi/linux/ptrace.h b/include/uapi/linux/ptrace.h index 1ef6c056a9e..022ab186a81 100644 --- a/include/uapi/linux/ptrace.h +++ b/include/uapi/linux/ptrace.h @@ -73,7 +73,10 @@ #define PTRACE_O_TRACEEXIT (1 << PTRACE_EVENT_EXIT) #define PTRACE_O_TRACESECCOMP (1 << PTRACE_EVENT_SECCOMP) -#define PTRACE_O_MASK 0x000000ff +/* eventless options */ +#define PTRACE_O_EXITKILL (1 << 20) + +#define PTRACE_O_MASK (0x000000ff | PTRACE_O_EXITKILL) #include <asm/ptrace.h> diff --git a/include/uapi/linux/rtnetlink.h b/include/uapi/linux/rtnetlink.h index fcd768b09f6..7a5eb196ade 100644 --- a/include/uapi/linux/rtnetlink.h +++ b/include/uapi/linux/rtnetlink.h @@ -120,6 +120,18 @@ enum { RTM_SETDCB, #define RTM_SETDCB RTM_SETDCB + RTM_NEWNETCONF = 80, +#define RTM_NEWNETCONF RTM_NEWNETCONF + RTM_GETNETCONF = 82, +#define RTM_GETNETCONF RTM_GETNETCONF + + RTM_NEWMDB = 84, +#define RTM_NEWMDB RTM_NEWMDB + RTM_DELMDB = 85, +#define RTM_DELMDB RTM_DELMDB + RTM_GETMDB = 86, +#define RTM_GETMDB RTM_GETMDB + __RTM_MAX, #define RTM_MAX (((__RTM_MAX + 3) & ~3) - 1) }; @@ -222,6 +234,7 @@ enum { #define RTPROT_XORP 14 /* XORP */ #define RTPROT_NTK 15 /* Netsukuku */ #define RTPROT_DHCP 16 /* DHCP client */ +#define RTPROT_MROUTED 17 /* Multicast daemon */ /* rtm_scope @@ -283,6 +296,7 @@ enum rtattr_type_t { RTA_MP_ALGO, /* no longer used */ RTA_TABLE, RTA_MARK, + RTA_MFC_STATS, __RTA_MAX }; @@ -403,6 +417,12 @@ struct rta_session { } u; }; +struct rta_mfc_stats { + __u64 mfcs_packets; + __u64 mfcs_bytes; + __u64 mfcs_wrong_if; +}; + /**** * General form of address family dependent message. ****/ @@ -587,6 +607,12 @@ enum rtnetlink_groups { #define RTNLGRP_PHONET_ROUTE RTNLGRP_PHONET_ROUTE RTNLGRP_DCB, #define RTNLGRP_DCB RTNLGRP_DCB + RTNLGRP_IPV4_NETCONF, +#define RTNLGRP_IPV4_NETCONF RTNLGRP_IPV4_NETCONF + RTNLGRP_IPV6_NETCONF, +#define RTNLGRP_IPV6_NETCONF RTNLGRP_IPV6_NETCONF + RTNLGRP_MDB, +#define RTNLGRP_MDB RTNLGRP_MDB __RTNLGRP_MAX }; #define RTNLGRP_MAX (__RTNLGRP_MAX - 1) diff --git a/include/uapi/linux/serial_core.h b/include/uapi/linux/serial_core.h index 7e1ab20adc0..78f99d97475 100644 --- a/include/uapi/linux/serial_core.h +++ b/include/uapi/linux/serial_core.h @@ -49,7 +49,8 @@ #define PORT_XR17D15X 21 /* Exar XR17D15x UART */ #define PORT_LPC3220 22 /* NXP LPC32xx SoC "Standard" UART */ #define PORT_8250_CIR 23 /* CIR infrared port, has its own driver */ -#define PORT_MAX_8250 23 /* max port ID */ +#define PORT_XR17V35X 24 /* Exar XR17V35x UARTs */ +#define PORT_MAX_8250 24 /* max port ID */ /* * ARM specific type numbers. These are not currently guaranteed @@ -215,5 +216,7 @@ /* Energy Micro efm32 SoC */ #define PORT_EFMUART 100 +/* ARC (Synopsys) on-chip UART */ +#define PORT_ARC 101 #endif /* _UAPILINUX_SERIAL_CORE_H */ diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 5ed325e88a8..e6322605b13 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -367,5 +367,23 @@ #define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */ #define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */ +/* + * These are definitions for the Exar XR17V35X and XR17(C|D)15X + */ +#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */ +#define UART_EXAR_SLEEP 0x8b /* Sleep mode */ +#define UART_EXAR_DVID 0x8d /* Device identification */ + +#define UART_EXAR_FCTR 0x08 /* Feature Control Register */ +#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */ +#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */ +#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */ +#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */ +#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */ +#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */ + +#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */ +#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */ + #endif /* _LINUX_SERIAL_REG_H */ diff --git a/include/uapi/linux/signal.h b/include/uapi/linux/signal.h index dff452ed6d0..e1bd50c29de 100644 --- a/include/uapi/linux/signal.h +++ b/include/uapi/linux/signal.h @@ -4,5 +4,7 @@ #include <asm/signal.h> #include <asm/siginfo.h> +#define SS_ONSTACK 1 +#define SS_DISABLE 2 #endif /* _UAPI_LINUX_SIGNAL_H */ diff --git a/include/uapi/linux/swab.h b/include/uapi/linux/swab.h index e811474724c..0e011eb91b5 100644 --- a/include/uapi/linux/swab.h +++ b/include/uapi/linux/swab.h @@ -45,7 +45,9 @@ static inline __attribute_const__ __u16 __fswab16(__u16 val) { -#ifdef __arch_swab16 +#ifdef __HAVE_BUILTIN_BSWAP16__ + return __builtin_bswap16(val); +#elif defined (__arch_swab16) return __arch_swab16(val); #else return ___constant_swab16(val); @@ -54,7 +56,9 @@ static inline __attribute_const__ __u16 __fswab16(__u16 val) static inline __attribute_const__ __u32 __fswab32(__u32 val) { -#ifdef __arch_swab32 +#ifdef __HAVE_BUILTIN_BSWAP32__ + return __builtin_bswap32(val); +#elif defined(__arch_swab32) return __arch_swab32(val); #else return ___constant_swab32(val); @@ -63,7 +67,9 @@ static inline __attribute_const__ __u32 __fswab32(__u32 val) static inline __attribute_const__ __u64 __fswab64(__u64 val) { -#ifdef __arch_swab64 +#ifdef __HAVE_BUILTIN_BSWAP64__ + return __builtin_bswap64(val); +#elif defined (__arch_swab64) return __arch_swab64(val); #elif defined(__SWAB_64_THRU_32__) __u32 h = val >> 32; diff --git a/include/uapi/linux/unix_diag.h b/include/uapi/linux/unix_diag.h index b1d2bf16b33..b8a24941db2 100644 --- a/include/uapi/linux/unix_diag.h +++ b/include/uapi/linux/unix_diag.h @@ -37,6 +37,7 @@ enum { UNIX_DIAG_ICONS, UNIX_DIAG_RQLEN, UNIX_DIAG_MEMINFO, + UNIX_DIAG_SHUTDOWN, UNIX_DIAG_MAX, }; diff --git a/include/uapi/linux/usb/cdc.h b/include/uapi/linux/usb/cdc.h index 81a927930bf..f35aa0a338c 100644 --- a/include/uapi/linux/usb/cdc.h +++ b/include/uapi/linux/usb/cdc.h @@ -19,6 +19,7 @@ #define USB_CDC_SUBCLASS_OBEX 0x0b #define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_SUBCLASS_NCM 0x0d +#define USB_CDC_SUBCLASS_MBIM 0x0e #define USB_CDC_PROTO_NONE 0 @@ -33,6 +34,7 @@ #define USB_CDC_PROTO_EEM 7 #define USB_CDC_NCM_PROTO_NTB 1 +#define USB_CDC_MBIM_PROTO_NTB 2 /*-------------------------------------------------------------------------*/ @@ -53,6 +55,7 @@ #define USB_CDC_DMM_TYPE 0x14 #define USB_CDC_OBEX_TYPE 0x15 #define USB_CDC_NCM_TYPE 0x1a +#define USB_CDC_MBIM_TYPE 0x1b /* "Header Functional Descriptor" from CDC spec 5.2.3.1 */ struct usb_cdc_header_desc { @@ -187,6 +190,21 @@ struct usb_cdc_ncm_desc { __le16 bcdNcmVersion; __u8 bmNetworkCapabilities; } __attribute__ ((packed)); + +/* "MBIM Control Model Functional Descriptor" */ +struct usb_cdc_mbim_desc { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDescriptorSubType; + + __le16 bcdMBIMVersion; + __le16 wMaxControlMessage; + __u8 bNumberFilters; + __u8 bMaxFilterSize; + __le16 wMaxSegmentSize; + __u8 bmNetworkCapabilities; +} __attribute__ ((packed)); + /*-------------------------------------------------------------------------*/ /* @@ -332,6 +350,11 @@ struct usb_cdc_ncm_nth32 { #define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ #define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ +#define USB_CDC_MBIM_NDP16_IPS_SIGN 0x00535049 /* IPS<sessionID> : IPS0 for now */ +#define USB_CDC_MBIM_NDP32_IPS_SIGN 0x00737069 /* ips<sessionID> : ips0 for now */ +#define USB_CDC_MBIM_NDP16_DSS_SIGN 0x00535344 /* DSS<sessionID> */ +#define USB_CDC_MBIM_NDP32_DSS_SIGN 0x00737364 /* dss<sessionID> */ + /* 16-bit NCM Datagram Pointer Entry */ struct usb_cdc_ncm_dpe16 { __le16 wDatagramIndex; diff --git a/include/uapi/linux/videodev2.h b/include/uapi/linux/videodev2.h index 57bfa59cda7..3cf3e946e33 100644 --- a/include/uapi/linux/videodev2.h +++ b/include/uapi/linux/videodev2.h @@ -186,6 +186,7 @@ enum v4l2_memory { V4L2_MEMORY_MMAP = 1, V4L2_MEMORY_USERPTR = 2, V4L2_MEMORY_OVERLAY = 3, + V4L2_MEMORY_DMABUF = 4, }; /* see also http://vektor.theorem.ca/graphics/ycbcr/ */ @@ -602,6 +603,8 @@ struct v4l2_requestbuffers { * should be passed to mmap() called on the video node) * @userptr: when memory is V4L2_MEMORY_USERPTR, a userspace pointer * pointing to this plane + * @fd: when memory is V4L2_MEMORY_DMABUF, a userspace file + * descriptor associated with this plane * @data_offset: offset in the plane to the start of data; usually 0, * unless there is a header in front of the data * @@ -616,6 +619,7 @@ struct v4l2_plane { union { __u32 mem_offset; unsigned long userptr; + __s32 fd; } m; __u32 data_offset; __u32 reserved[11]; @@ -640,6 +644,8 @@ struct v4l2_plane { * (or a "cookie" that should be passed to mmap() as offset) * @userptr: for non-multiplanar buffers with memory == V4L2_MEMORY_USERPTR; * a userspace pointer pointing to this buffer + * @fd: for non-multiplanar buffers with memory == V4L2_MEMORY_DMABUF; + * a userspace file descriptor associated with this buffer * @planes: for multiplanar buffers; userspace pointer to the array of plane * info structs for this buffer * @length: size in bytes of the buffer (NOT its payload) for single-plane @@ -666,6 +672,7 @@ struct v4l2_buffer { __u32 offset; unsigned long userptr; struct v4l2_plane *planes; + __s32 fd; } m; __u32 length; __u32 reserved2; @@ -687,6 +694,33 @@ struct v4l2_buffer { #define V4L2_BUF_FLAG_NO_CACHE_INVALIDATE 0x0800 #define V4L2_BUF_FLAG_NO_CACHE_CLEAN 0x1000 +/** + * struct v4l2_exportbuffer - export of video buffer as DMABUF file descriptor + * + * @index: id number of the buffer + * @type: enum v4l2_buf_type; buffer type (type == *_MPLANE for + * multiplanar buffers); + * @plane: index of the plane to be exported, 0 for single plane queues + * @flags: flags for newly created file, currently only O_CLOEXEC is + * supported, refer to manual of open syscall for more details + * @fd: file descriptor associated with DMABUF (set by driver) + * + * Contains data used for exporting a video buffer as DMABUF file descriptor. + * The buffer is identified by a 'cookie' returned by VIDIOC_QUERYBUF + * (identical to the cookie used to mmap() the buffer to userspace). All + * reserved fields must be set to zero. The field reserved0 is expected to + * become a structure 'type' allowing an alternative layout of the structure + * content. Therefore this field should not be used for any other extensions. + */ +struct v4l2_exportbuffer { + __u32 type; /* enum v4l2_buf_type */ + __u32 index; + __u32 plane; + __u32 flags; + __s32 fd; + __u32 reserved[11]; +}; + /* * O V E R L A Y P R E V I E W */ @@ -737,7 +771,7 @@ struct v4l2_window { struct v4l2_captureparm { __u32 capability; /* Supported modes */ __u32 capturemode; /* Current mode */ - struct v4l2_fract timeperframe; /* Time per frame in .1us units */ + struct v4l2_fract timeperframe; /* Time per frame in seconds */ __u32 extendedmode; /* Driver-specific extensions */ __u32 readbuffers; /* # of buffers for read */ __u32 reserved[4]; @@ -1888,6 +1922,7 @@ struct v4l2_create_buffers { #define VIDIOC_S_FBUF _IOW('V', 11, struct v4l2_framebuffer) #define VIDIOC_OVERLAY _IOW('V', 14, int) #define VIDIOC_QBUF _IOWR('V', 15, struct v4l2_buffer) +#define VIDIOC_EXPBUF _IOWR('V', 16, struct v4l2_exportbuffer) #define VIDIOC_DQBUF _IOWR('V', 17, struct v4l2_buffer) #define VIDIOC_STREAMON _IOW('V', 18, int) #define VIDIOC_STREAMOFF _IOW('V', 19, int) diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h index 270fb22c581..a7630d04029 100644 --- a/include/uapi/linux/virtio_ids.h +++ b/include/uapi/linux/virtio_ids.h @@ -37,5 +37,6 @@ #define VIRTIO_ID_RPMSG 7 /* virtio remote processor messaging */ #define VIRTIO_ID_SCSI 8 /* virtio scsi */ #define VIRTIO_ID_9P 9 /* 9p virtio console */ +#define VIRTIO_ID_RPROC_SERIAL 11 /* virtio remoteproc serial link */ #endif /* _LINUX_VIRTIO_IDS_H */ diff --git a/include/uapi/linux/virtio_net.h b/include/uapi/linux/virtio_net.h index 2470f541af5..848e3584d7c 100644 --- a/include/uapi/linux/virtio_net.h +++ b/include/uapi/linux/virtio_net.h @@ -51,6 +51,8 @@ #define VIRTIO_NET_F_CTRL_RX_EXTRA 20 /* Extra RX mode control support */ #define VIRTIO_NET_F_GUEST_ANNOUNCE 21 /* Guest can announce device on the * network */ +#define VIRTIO_NET_F_MQ 22 /* Device supports Receive Flow + * Steering */ #define VIRTIO_NET_S_LINK_UP 1 /* Link is up */ #define VIRTIO_NET_S_ANNOUNCE 2 /* Announcement is needed */ @@ -60,6 +62,11 @@ struct virtio_net_config { __u8 mac[6]; /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */ __u16 status; + /* Maximum number of each of transmit and receive queues; + * see VIRTIO_NET_F_MQ and VIRTIO_NET_CTRL_MQ. + * Legal values are between 1 and 0x8000 + */ + __u16 max_virtqueue_pairs; } __attribute__((packed)); /* This is the first element of the scatter-gather list. If you don't @@ -166,4 +173,24 @@ struct virtio_net_ctrl_mac { #define VIRTIO_NET_CTRL_ANNOUNCE 3 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK 0 +/* + * Control Receive Flow Steering + * + * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET + * enables Receive Flow Steering, specifying the number of the transmit and + * receive queues that will be used. After the command is consumed and acked by + * the device, the device will not steer new packets on receive virtqueues + * other than specified nor read from transmit virtqueues other than specified. + * Accordingly, driver should not transmit new packets on virtqueues other than + * specified. + */ +struct virtio_net_ctrl_mq { + u16 virtqueue_pairs; +}; + +#define VIRTIO_NET_CTRL_MQ 4 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET 0 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN 1 + #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX 0x8000 + #endif /* _LINUX_VIRTIO_NET_H */ |