diff options
Diffstat (limited to 'drivers/ide/ide-dma.c')
| -rw-r--r-- | drivers/ide/ide-dma.c | 959 |
1 files changed, 959 insertions, 0 deletions
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c new file mode 100644 index 00000000000..2d2eefb610d --- /dev/null +++ b/drivers/ide/ide-dma.c @@ -0,0 +1,959 @@ +/* + * linux/drivers/ide/ide-dma.c Version 4.10 June 9, 2000 + * + * Copyright (c) 1999-2000 Andre Hedrick <andre@linux-ide.org> + * May be copied or modified under the terms of the GNU General Public License + */ + +/* + * Special Thanks to Mark for his Six years of work. + * + * Copyright (c) 1995-1998 Mark Lord + * May be copied or modified under the terms of the GNU General Public License + */ + +/* + * This module provides support for the bus-master IDE DMA functions + * of various PCI chipsets, including the Intel PIIX (i82371FB for + * the 430 FX chipset), the PIIX3 (i82371SB for the 430 HX/VX and + * 440 chipsets), and the PIIX4 (i82371AB for the 430 TX chipset) + * ("PIIX" stands for "PCI ISA IDE Xcellerator"). + * + * Pretty much the same code works for other IDE PCI bus-mastering chipsets. + * + * DMA is supported for all IDE devices (disk drives, cdroms, tapes, floppies). + * + * By default, DMA support is prepared for use, but is currently enabled only + * for drives which already have DMA enabled (UltraDMA or mode 2 multi/single), + * or which are recognized as "good" (see table below). Drives with only mode0 + * or mode1 (multi/single) DMA should also work with this chipset/driver + * (eg. MC2112A) but are not enabled by default. + * + * Use "hdparm -i" to view modes supported by a given drive. + * + * The hdparm-3.5 (or later) utility can be used for manually enabling/disabling + * DMA support, but must be (re-)compiled against this kernel version or later. + * + * To enable DMA, use "hdparm -d1 /dev/hd?" on a per-drive basis after booting. + * If problems arise, ide.c will disable DMA operation after a few retries. + * This error recovery mechanism works and has been extremely well exercised. + * + * IDE drives, depending on their vintage, may support several different modes + * of DMA operation. The boot-time modes are indicated with a "*" in + * the "hdparm -i" listing, and can be changed with *knowledgeable* use of + * the "hdparm -X" feature. There is seldom a need to do this, as drives + * normally power-up with their "best" PIO/DMA modes enabled. + * + * Testing has been done with a rather extensive number of drives, + * with Quantum & Western Digital models generally outperforming the pack, + * and Fujitsu & Conner (and some Seagate which are really Conner) drives + * showing more lackluster throughput. + * + * Keep an eye on /var/adm/messages for "DMA disabled" messages. + * + * Some people have reported trouble with Intel Zappa motherboards. + * This can be fixed by upgrading the AMI BIOS to version 1.00.04.BS0, + * available from ftp://ftp.intel.com/pub/bios/10004bs0.exe + * (thanks to Glen Morrell <glen@spin.Stanford.edu> for researching this). + * + * Thanks to "Christopher J. Reimer" <reimer@doe.carleton.ca> for + * fixing the problem with the BIOS on some Acer motherboards. + * + * Thanks to "Benoit Poulot-Cazajous" <poulot@chorus.fr> for testing + * "TX" chipset compatibility and for providing patches for the "TX" chipset. + * + * Thanks to Christian Brunner <chb@muc.de> for taking a good first crack + * at generic DMA -- his patches were referred to when preparing this code. + * + * Most importantly, thanks to Robert Bringman <rob@mars.trion.com> + * for supplying a Promise UDMA board & WD UDMA drive for this work! + * + * And, yes, Intel Zappa boards really *do* use both PIIX IDE ports. + * + * ATA-66/100 and recovery functions, I forgot the rest...... + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/mm.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/ide.h> +#include <linux/delay.h> +#include <linux/scatterlist.h> + +#include <asm/io.h> +#include <asm/irq.h> + +struct drive_list_entry { + const char *id_model; + const char *id_firmware; +}; + +static const struct drive_list_entry drive_whitelist [] = { + + { "Micropolis 2112A" , "ALL" }, + { "CONNER CTMA 4000" , "ALL" }, + { "CONNER CTT8000-A" , "ALL" }, + { "ST34342A" , "ALL" }, + { NULL , NULL } +}; + +static const struct drive_list_entry drive_blacklist [] = { + + { "WDC AC11000H" , "ALL" }, + { "WDC AC22100H" , "ALL" }, + { "WDC AC32500H" , "ALL" }, + { "WDC AC33100H" , "ALL" }, + { "WDC AC31600H" , "ALL" }, + { "WDC AC32100H" , "24.09P07" }, + { "WDC AC23200L" , "21.10N21" }, + { "Compaq CRD-8241B" , "ALL" }, + { "CRD-8400B" , "ALL" }, + { "CRD-8480B", "ALL" }, + { "CRD-8482B", "ALL" }, + { "CRD-84" , "ALL" }, + { "SanDisk SDP3B" , "ALL" }, + { "SanDisk SDP3B-64" , "ALL" }, + { "SANYO CD-ROM CRD" , "ALL" }, + { "HITACHI CDR-8" , "ALL" }, + { "HITACHI CDR-8335" , "ALL" }, + { "HITACHI CDR-8435" , "ALL" }, + { "Toshiba CD-ROM XM-6202B" , "ALL" }, + { "CD-532E-A" , "ALL" }, + { "E-IDE CD-ROM CR-840", "ALL" }, + { "CD-ROM Drive/F5A", "ALL" }, + { "WPI CDD-820", "ALL" }, + { "SAMSUNG CD-ROM SC-148C", "ALL" }, + { "SAMSUNG CD-ROM SC", "ALL" }, + { "SanDisk SDP3B-64" , "ALL" }, + { "SAMSUNG CD-ROM SN-124", "ALL" }, + { "ATAPI CD-ROM DRIVE 40X MAXIMUM", "ALL" }, + { "_NEC DV5800A", "ALL" }, + { NULL , NULL } + +}; + +/** + * in_drive_list - look for drive in black/white list + * @id: drive identifier + * @drive_table: list to inspect + * + * Look for a drive in the blacklist and the whitelist tables + * Returns 1 if the drive is found in the table. + */ + +static int in_drive_list(struct hd_driveid *id, const struct drive_list_entry *drive_table) +{ + for ( ; drive_table->id_model ; drive_table++) + if ((!strcmp(drive_table->id_model, id->model)) && + ((strstr(drive_table->id_firmware, id->fw_rev)) || + (!strcmp(drive_table->id_firmware, "ALL")))) + return 1; + return 0; +} + +/** + * ide_dma_intr - IDE DMA interrupt handler + * @drive: the drive the interrupt is for + * + * Handle an interrupt completing a read/write DMA transfer on an + * IDE device + */ + +ide_startstop_t ide_dma_intr (ide_drive_t *drive) +{ + u8 stat = 0, dma_stat = 0; + + dma_stat = HWIF(drive)->ide_dma_end(drive); + stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */ + if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { + if (!dma_stat) { + struct request *rq = HWGROUP(drive)->rq; + + if (rq->rq_disk) { + ide_driver_t *drv; + + drv = *(ide_driver_t **)rq->rq_disk->private_data;; + drv->end_request(drive, 1, rq->nr_sectors); + } else + ide_end_request(drive, 1, rq->nr_sectors); + return ide_stopped; + } + printk(KERN_ERR "%s: dma_intr: bad DMA status (dma_stat=%x)\n", + drive->name, dma_stat); + } + return ide_error(drive, "dma_intr", stat); +} + +EXPORT_SYMBOL_GPL(ide_dma_intr); + +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +/** + * ide_build_sglist - map IDE scatter gather for DMA I/O + * @drive: the drive to build the DMA table for + * @rq: the request holding the sg list + * + * Perform the PCI mapping magic necessary to access the source or + * target buffers of a request via PCI DMA. The lower layers of the + * kernel provide the necessary cache management so that we can + * operate in a portable fashion + */ + +int ide_build_sglist(ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = HWIF(drive); + struct scatterlist *sg = hwif->sg_table; + + if ((rq->flags & REQ_DRIVE_TASKFILE) && rq->nr_sectors > 256) + BUG(); + + ide_map_sg(drive, rq); + + if (rq_data_dir(rq) == READ) + hwif->sg_dma_direction = PCI_DMA_FROMDEVICE; + else + hwif->sg_dma_direction = PCI_DMA_TODEVICE; + + return pci_map_sg(hwif->pci_dev, sg, hwif->sg_nents, hwif->sg_dma_direction); +} + +EXPORT_SYMBOL_GPL(ide_build_sglist); + +/** + * ide_build_dmatable - build IDE DMA table + * + * ide_build_dmatable() prepares a dma request. We map the command + * to get the pci bus addresses of the buffers and then build up + * the PRD table that the IDE layer wants to be fed. The code + * knows about the 64K wrap bug in the CS5530. + * + * Returns the number of built PRD entries if all went okay, + * returns 0 otherwise. + * + * May also be invoked from trm290.c + */ + +int ide_build_dmatable (ide_drive_t *drive, struct request *rq) +{ + ide_hwif_t *hwif = HWIF(drive); + unsigned int *table = hwif->dmatable_cpu; + unsigned int is_trm290 = (hwif->chipset == ide_trm290) ? 1 : 0; + unsigned int count = 0; + int i; + struct scatterlist *sg; + + hwif->sg_nents = i = ide_build_sglist(drive, rq); + + if (!i) + return 0; + + sg = hwif->sg_table; + while (i) { + u32 cur_addr; + u32 cur_len; + + cur_addr = sg_dma_address(sg); + cur_len = sg_dma_len(sg); + + /* + * Fill in the dma table, without crossing any 64kB boundaries. + * Most hardware requires 16-bit alignment of all blocks, + * but the trm290 requires 32-bit alignment. + */ + + while (cur_len) { + if (count++ >= PRD_ENTRIES) { + printk(KERN_ERR "%s: DMA table too small\n", drive->name); + goto use_pio_instead; + } else { + u32 xcount, bcount = 0x10000 - (cur_addr & 0xffff); + + if (bcount > cur_len) + bcount = cur_len; + *table++ = cpu_to_le32(cur_addr); + xcount = bcount & 0xffff; + if (is_trm290) + xcount = ((xcount >> 2) - 1) << 16; + if (xcount == 0x0000) { + /* + * Most chipsets correctly interpret a length of 0x0000 as 64KB, + * but at least one (e.g. CS5530) misinterprets it as zero (!). + * So here we break the 64KB entry into two 32KB entries instead. + */ + if (count++ >= PRD_ENTRIES) { + printk(KERN_ERR "%s: DMA table too small\n", drive->name); + goto use_pio_instead; + } + *table++ = cpu_to_le32(0x8000); + *table++ = cpu_to_le32(cur_addr + 0x8000); + xcount = 0x8000; + } + *table++ = cpu_to_le32(xcount); + cur_addr += bcount; + cur_len -= bcount; + } + } + + sg++; + i--; + } + + if (count) { + if (!is_trm290) + *--table |= cpu_to_le32(0x80000000); + return count; + } + printk(KERN_ERR "%s: empty DMA table?\n", drive->name); +use_pio_instead: + pci_unmap_sg(hwif->pci_dev, + hwif->sg_table, + hwif->sg_nents, + hwif->sg_dma_direction); + return 0; /* revert to PIO for this request */ +} + +EXPORT_SYMBOL_GPL(ide_build_dmatable); + +/** + * ide_destroy_dmatable - clean up DMA mapping + * @drive: The drive to unmap + * + * Teardown mappings after DMA has completed. This must be called + * after the completion of each use of ide_build_dmatable and before + * the next use of ide_build_dmatable. Failure to do so will cause + * an oops as only one mapping can be live for each target at a given + * time. + */ + +void ide_destroy_dmatable (ide_drive_t *drive) +{ + struct pci_dev *dev = HWIF(drive)->pci_dev; + struct scatterlist *sg = HWIF(drive)->sg_table; + int nents = HWIF(drive)->sg_nents; + + pci_unmap_sg(dev, sg, nents, HWIF(drive)->sg_dma_direction); +} + +EXPORT_SYMBOL_GPL(ide_destroy_dmatable); + +/** + * config_drive_for_dma - attempt to activate IDE DMA + * @drive: the drive to place in DMA mode + * + * If the drive supports at least mode 2 DMA or UDMA of any kind + * then attempt to place it into DMA mode. Drives that are known to + * support DMA but predate the DMA properties or that are known + * to have DMA handling bugs are also set up appropriately based + * on the good/bad drive lists. + */ + +static int config_drive_for_dma (ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + ide_hwif_t *hwif = HWIF(drive); + + if ((id->capability & 1) && hwif->autodma) { + /* + * Enable DMA on any drive that has + * UltraDMA (mode 0/1/2/3/4/5/6) enabled + */ + if ((id->field_valid & 4) && ((id->dma_ultra >> 8) & 0x7f)) + return hwif->ide_dma_on(drive); + /* + * Enable DMA on any drive that has mode2 DMA + * (multi or single) enabled + */ + if (id->field_valid & 2) /* regular DMA */ + if ((id->dma_mword & 0x404) == 0x404 || + (id->dma_1word & 0x404) == 0x404) + return hwif->ide_dma_on(drive); + + /* Consult the list of known "good" drives */ + if (__ide_dma_good_drive(drive)) + return hwif->ide_dma_on(drive); + } +// if (hwif->tuneproc != NULL) hwif->tuneproc(drive, 255); + return hwif->ide_dma_off_quietly(drive); +} + +/** + * dma_timer_expiry - handle a DMA timeout + * @drive: Drive that timed out + * + * An IDE DMA transfer timed out. In the event of an error we ask + * the driver to resolve the problem, if a DMA transfer is still + * in progress we continue to wait (arguably we need to add a + * secondary 'I don't care what the drive thinks' timeout here) + * Finally if we have an interrupt we let it complete the I/O. + * But only one time - we clear expiry and if it's still not + * completed after WAIT_CMD, we error and retry in PIO. + * This can occur if an interrupt is lost or due to hang or bugs. + */ + +static int dma_timer_expiry (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = hwif->INB(hwif->dma_status); + + printk(KERN_WARNING "%s: dma_timer_expiry: dma status == 0x%02x\n", + drive->name, dma_stat); + + if ((dma_stat & 0x18) == 0x18) /* BUSY Stupid Early Timer !! */ + return WAIT_CMD; + + HWGROUP(drive)->expiry = NULL; /* one free ride for now */ + + /* 1 dmaing, 2 error, 4 intr */ + if (dma_stat & 2) /* ERROR */ + return -1; + + if (dma_stat & 1) /* DMAing */ + return WAIT_CMD; + + if (dma_stat & 4) /* Got an Interrupt */ + return WAIT_CMD; + + return 0; /* Status is unknown -- reset the bus */ +} + +/** + * __ide_dma_host_off - Generic DMA kill + * @drive: drive to control + * + * Perform the generic IDE controller DMA off operation. This + * works for most IDE bus mastering controllers + */ + +int __ide_dma_host_off (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 unit = (drive->select.b.unit & 0x01); + u8 dma_stat = hwif->INB(hwif->dma_status); + + hwif->OUTB((dma_stat & ~(1<<(5+unit))), hwif->dma_status); + return 0; +} + +EXPORT_SYMBOL(__ide_dma_host_off); + +/** + * __ide_dma_host_off_quietly - Generic DMA kill + * @drive: drive to control + * + * Turn off the current DMA on this IDE controller. + */ + +int __ide_dma_off_quietly (ide_drive_t *drive) +{ + drive->using_dma = 0; + ide_toggle_bounce(drive, 0); + + if (HWIF(drive)->ide_dma_host_off(drive)) + return 1; + + return 0; +} + +EXPORT_SYMBOL(__ide_dma_off_quietly); +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ + +/** + * __ide_dma_off - disable DMA on a device + * @drive: drive to disable DMA on + * + * Disable IDE DMA for a device on this IDE controller. + * Inform the user that DMA has been disabled. + */ + +int __ide_dma_off (ide_drive_t *drive) +{ + printk(KERN_INFO "%s: DMA disabled\n", drive->name); + return HWIF(drive)->ide_dma_off_quietly(drive); +} + +EXPORT_SYMBOL(__ide_dma_off); + +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +/** + * __ide_dma_host_on - Enable DMA on a host + * @drive: drive to enable for DMA + * + * Enable DMA on an IDE controller following generic bus mastering + * IDE controller behaviour + */ + +int __ide_dma_host_on (ide_drive_t *drive) +{ + if (drive->using_dma) { + ide_hwif_t *hwif = HWIF(drive); + u8 unit = (drive->select.b.unit & 0x01); + u8 dma_stat = hwif->INB(hwif->dma_status); + + hwif->OUTB((dma_stat|(1<<(5+unit))), hwif->dma_status); + return 0; + } + return 1; +} + +EXPORT_SYMBOL(__ide_dma_host_on); + +/** + * __ide_dma_on - Enable DMA on a device + * @drive: drive to enable DMA on + * + * Enable IDE DMA for a device on this IDE controller. + */ + +int __ide_dma_on (ide_drive_t *drive) +{ + /* consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) + return 1; + + drive->using_dma = 1; + ide_toggle_bounce(drive, 1); + + if (HWIF(drive)->ide_dma_host_on(drive)) + return 1; + + return 0; +} + +EXPORT_SYMBOL(__ide_dma_on); + +/** + * __ide_dma_check - check DMA setup + * @drive: drive to check + * + * Don't use - due for extermination + */ + +int __ide_dma_check (ide_drive_t *drive) +{ + return config_drive_for_dma(drive); +} + +EXPORT_SYMBOL(__ide_dma_check); + +/** + * ide_dma_setup - begin a DMA phase + * @drive: target device + * + * Build an IDE DMA PRD (IDE speak for scatter gather table) + * and then set up the DMA transfer registers for a device + * that follows generic IDE PCI DMA behaviour. Controllers can + * override this function if they need to + * + * Returns 0 on success. If a PIO fallback is required then 1 + * is returned. + */ + +int ide_dma_setup(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + struct request *rq = HWGROUP(drive)->rq; + unsigned int reading; + u8 dma_stat; + + if (rq_data_dir(rq)) + reading = 0; + else + reading = 1 << 3; + + /* fall back to pio! */ + if (!ide_build_dmatable(drive, rq)) { + ide_map_sg(drive, rq); + return 1; + } + + /* PRD table */ + hwif->OUTL(hwif->dmatable_dma, hwif->dma_prdtable); + + /* specify r/w */ + hwif->OUTB(reading, hwif->dma_command); + + /* read dma_status for INTR & ERROR flags */ + dma_stat = hwif->INB(hwif->dma_status); + + /* clear INTR & ERROR flags */ + hwif->OUTB(dma_stat|6, hwif->dma_status); + drive->waiting_for_dma = 1; + return 0; +} + +EXPORT_SYMBOL_GPL(ide_dma_setup); + +static void ide_dma_exec_cmd(ide_drive_t *drive, u8 command) +{ + /* issue cmd to drive */ + ide_execute_command(drive, command, &ide_dma_intr, 2*WAIT_CMD, dma_timer_expiry); +} + +void ide_dma_start(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_cmd = hwif->INB(hwif->dma_command); + + /* Note that this is done *after* the cmd has + * been issued to the drive, as per the BM-IDE spec. + * The Promise Ultra33 doesn't work correctly when + * we do this part before issuing the drive cmd. + */ + /* start DMA */ + hwif->OUTB(dma_cmd|1, hwif->dma_command); + hwif->dma = 1; + wmb(); +} + +EXPORT_SYMBOL_GPL(ide_dma_start); + +/* returns 1 on error, 0 otherwise */ +int __ide_dma_end (ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = 0, dma_cmd = 0; + + drive->waiting_for_dma = 0; + /* get dma_command mode */ + dma_cmd = hwif->INB(hwif->dma_command); + /* stop DMA */ + hwif->OUTB(dma_cmd&~1, hwif->dma_command); + /* get DMA status */ + dma_stat = hwif->INB(hwif->dma_status); + /* clear the INTR & ERROR bits */ + hwif->OUTB(dma_stat|6, hwif->dma_status); + /* purge DMA mappings */ + ide_destroy_dmatable(drive); + /* verify good DMA status */ + hwif->dma = 0; + wmb(); + return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0; +} + +EXPORT_SYMBOL(__ide_dma_end); + +/* returns 1 if dma irq issued, 0 otherwise */ +static int __ide_dma_test_irq(ide_drive_t *drive) +{ + ide_hwif_t *hwif = HWIF(drive); + u8 dma_stat = hwif->INB(hwif->dma_status); + +#if 0 /* do not set unless you know what you are doing */ + if (dma_stat & 4) { + u8 stat = hwif->INB(IDE_STATUS_REG); + hwif->OUTB(hwif->dma_status, dma_stat & 0xE4); + } +#endif + /* return 1 if INTR asserted */ + if ((dma_stat & 4) == 4) + return 1; + if (!drive->waiting_for_dma) + printk(KERN_WARNING "%s: (%s) called while not waiting\n", + drive->name, __FUNCTION__); + return 0; +} +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ + +int __ide_dma_bad_drive (ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + + int blacklist = in_drive_list(id, drive_blacklist); + if (blacklist) { + printk(KERN_WARNING "%s: Disabling (U)DMA for %s (blacklisted)\n", + drive->name, id->model); + return blacklist; + } + return 0; +} + +EXPORT_SYMBOL(__ide_dma_bad_drive); + +int __ide_dma_good_drive (ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + return in_drive_list(id, drive_whitelist); +} + +EXPORT_SYMBOL(__ide_dma_good_drive); + +int ide_use_dma(ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + ide_hwif_t *hwif = drive->hwif; + + /* consult the list of known "bad" drives */ + if (__ide_dma_bad_drive(drive)) + return 0; + + /* capable of UltraDMA modes */ + if (id->field_valid & 4) { + if (hwif->ultra_mask & id->dma_ultra) + return 1; + } + + /* capable of regular DMA modes */ + if (id->field_valid & 2) { + if (hwif->mwdma_mask & id->dma_mword) + return 1; + if (hwif->swdma_mask & id->dma_1word) + return 1; + } + + /* consult the list of known "good" drives */ + if (__ide_dma_good_drive(drive) && id->eide_dma_time < 150) + return 1; + + return 0; +} + +EXPORT_SYMBOL_GPL(ide_use_dma); + +void ide_dma_verbose(ide_drive_t *drive) +{ + struct hd_driveid *id = drive->id; + ide_hwif_t *hwif = HWIF(drive); + + if (id->field_valid & 4) { + if ((id->dma_ultra >> 8) && (id->dma_mword >> 8)) + goto bug_dma_off; + if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) { + if (((id->dma_ultra >> 11) & 0x1F) && + eighty_ninty_three(drive)) { + if ((id->dma_ultra >> 15) & 1) { + printk(", UDMA(mode 7)"); + } else if ((id->dma_ultra >> 14) & 1) { + printk(", UDMA(133)"); + } else if ((id->dma_ultra >> 13) & 1) { + printk(", UDMA(100)"); + } else if ((id->dma_ultra >> 12) & 1) { + printk(", UDMA(66)"); + } else if ((id->dma_ultra >> 11) & 1) { + printk(", UDMA(44)"); + } else + goto mode_two; + } else { + mode_two: + if ((id->dma_ultra >> 10) & 1) { + printk(", UDMA(33)"); + } else if ((id->dma_ultra >> 9) & 1) { + printk(", UDMA(25)"); + } else if ((id->dma_ultra >> 8) & 1) { + printk(", UDMA(16)"); + } + } + } else { + printk(", (U)DMA"); /* Can be BIOS-enabled! */ + } + } else if (id->field_valid & 2) { + if ((id->dma_mword >> 8) && (id->dma_1word >> 8)) + goto bug_dma_off; + printk(", DMA"); + } else if (id->field_valid & 1) { + printk(", BUG"); + } + return; +bug_dma_off: + printk(", BUG DMA OFF"); + hwif->ide_dma_off_quietly(drive); + return; +} + +EXPORT_SYMBOL(ide_dma_verbose); + +#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +int __ide_dma_lostirq (ide_drive_t *drive) +{ + printk("%s: DMA interrupt recovery\n", drive->name); + return 1; +} + +EXPORT_SYMBOL(__ide_dma_lostirq); + +int __ide_dma_timeout (ide_drive_t *drive) +{ + printk(KERN_ERR "%s: timeout waiting for DMA\n", drive->name); + if (HWIF(drive)->ide_dma_test_irq(drive)) + return 0; + + return HWIF(drive)->ide_dma_end(drive); +} + +EXPORT_SYMBOL(__ide_dma_timeout); + +/* + * Needed for allowing full modular support of ide-driver + */ +static int ide_release_dma_engine(ide_hwif_t *hwif) +{ + if (hwif->dmatable_cpu) { + pci_free_consistent(hwif->pci_dev, + PRD_ENTRIES * PRD_BYTES, + hwif->dmatable_cpu, + hwif->dmatable_dma); + hwif->dmatable_cpu = NULL; + } + return 1; +} + +static int ide_release_iomio_dma(ide_hwif_t *hwif) +{ + if ((hwif->dma_extra) && (hwif->channel == 0)) + release_region((hwif->dma_base + 16), hwif->dma_extra); + release_region(hwif->dma_base, 8); + if (hwif->dma_base2) + release_region(hwif->dma_base, 8); + return 1; +} + +/* + * Needed for allowing full modular support of ide-driver + */ +int ide_release_dma (ide_hwif_t *hwif) +{ + if (hwif->mmio == 2) + return 1; + if (hwif->chipset == ide_etrax100) + return 1; + + ide_release_dma_engine(hwif); + return ide_release_iomio_dma(hwif); +} + +static int ide_allocate_dma_engine(ide_hwif_t *hwif) +{ + hwif->dmatable_cpu = pci_alloc_consistent(hwif->pci_dev, + PRD_ENTRIES * PRD_BYTES, + &hwif->dmatable_dma); + + if (hwif->dmatable_cpu) + return 0; + + printk(KERN_ERR "%s: -- Error, unable to allocate%s DMA table(s).\n", + hwif->cds->name, !hwif->dmatable_cpu ? " CPU" : ""); + + ide_release_dma_engine(hwif); + return 1; +} + +static int ide_mapped_mmio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports) +{ + printk(KERN_INFO " %s: MMIO-DMA ", hwif->name); + + hwif->dma_base = base; + if (hwif->cds->extra && hwif->channel == 0) + hwif->dma_extra = hwif->cds->extra; + + if(hwif->mate) + hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base : base; + else + hwif->dma_master = base; + return 0; +} + +static int ide_iomio_dma(ide_hwif_t *hwif, unsigned long base, unsigned int ports) +{ + printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx", + hwif->name, base, base + ports - 1); + if (!request_region(base, ports, hwif->name)) { + printk(" -- Error, ports in use.\n"); + return 1; + } + hwif->dma_base = base; + if ((hwif->cds->extra) && (hwif->channel == 0)) { + request_region(base+16, hwif->cds->extra, hwif->cds->name); + hwif->dma_extra = hwif->cds->extra; + } + + if(hwif->mate) + hwif->dma_master = (hwif->channel) ? hwif->mate->dma_base : base; + else + hwif->dma_master = base; + if (hwif->dma_base2) { + if (!request_region(hwif->dma_base2, ports, hwif->name)) + { + printk(" -- Error, secondary ports in use.\n"); + release_region(base, ports); + return 1; + } + } + return 0; +} + +static int ide_dma_iobase(ide_hwif_t *hwif, unsigned long base, unsigned int ports) +{ + if (hwif->mmio == 2) + return ide_mapped_mmio_dma(hwif, base,ports); + BUG_ON(hwif->mmio == 1); + return ide_iomio_dma(hwif, base, ports); +} + +/* + * This can be called for a dynamically installed interface. Don't __init it + */ +void ide_setup_dma (ide_hwif_t *hwif, unsigned long dma_base, unsigned int num_ports) +{ + if (ide_dma_iobase(hwif, dma_base, num_ports)) + return; + + if (ide_allocate_dma_engine(hwif)) { + ide_release_dma(hwif); + return; + } + + if (!(hwif->dma_command)) + hwif->dma_command = hwif->dma_base; + if (!(hwif->dma_vendor1)) + hwif->dma_vendor1 = (hwif->dma_base + 1); + if (!(hwif->dma_status)) + hwif->dma_status = (hwif->dma_base + 2); + if (!(hwif->dma_vendor3)) + hwif->dma_vendor3 = (hwif->dma_base + 3); + if (!(hwif->dma_prdtable)) + hwif->dma_prdtable = (hwif->dma_base + 4); + + if (!hwif->ide_dma_off_quietly) + hwif->ide_dma_off_quietly = &__ide_dma_off_quietly; + if (!hwif->ide_dma_host_off) + hwif->ide_dma_host_off = &__ide_dma_host_off; + if (!hwif->ide_dma_on) + hwif->ide_dma_on = &__ide_dma_on; + if (!hwif->ide_dma_host_on) + hwif->ide_dma_host_on = &__ide_dma_host_on; + if (!hwif->ide_dma_check) + hwif->ide_dma_check = &__ide_dma_check; + if (!hwif->dma_setup) + hwif->dma_setup = &ide_dma_setup; + if (!hwif->dma_exec_cmd) + hwif->dma_exec_cmd = &ide_dma_exec_cmd; + if (!hwif->dma_start) + hwif->dma_start = &ide_dma_start; + if (!hwif->ide_dma_end) + hwif->ide_dma_end = &__ide_dma_end; + if (!hwif->ide_dma_test_irq) + hwif->ide_dma_test_irq = &__ide_dma_test_irq; + if (!hwif->ide_dma_timeout) + hwif->ide_dma_timeout = &__ide_dma_timeout; + if (!hwif->ide_dma_lostirq) + hwif->ide_dma_lostirq = &__ide_dma_lostirq; + + if (hwif->chipset != ide_trm290) { + u8 dma_stat = hwif->INB(hwif->dma_status); + printk(", BIOS settings: %s:%s, %s:%s", + hwif->drives[0].name, (dma_stat & 0x20) ? "DMA" : "pio", + hwif->drives[1].name, (dma_stat & 0x40) ? "DMA" : "pio"); + } + printk("\n"); + + if (!(hwif->dma_master)) + BUG(); +} + +EXPORT_SYMBOL_GPL(ide_setup_dma); +#endif /* CONFIG_BLK_DEV_IDEDMA_PCI */ |