diff options
Diffstat (limited to 'drivers/i2c/busses')
47 files changed, 15628 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig new file mode 100644 index 00000000000..edf8051da3b --- /dev/null +++ b/drivers/i2c/busses/Kconfig @@ -0,0 +1,499 @@ +# +# Sensor device configuration +# + +menu "I2C Hardware Bus support" + depends on I2C + +config I2C_ALI1535 + tristate "ALI 1535" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SMB + Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB + controller is part of the 7101 device, which is an ACPI-compliant + Power Management Unit (PMU). + + This driver can also be built as a module. If so, the module + will be called i2c-ali1535. + +config I2C_ALI1563 + tristate "ALI 1563" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SMB + Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB + controller is part of the 7101 device, which is an ACPI-compliant + Power Management Unit (PMU). + + This driver can also be built as a module. If so, the module + will be called i2c-ali1563. + +config I2C_ALI15X3 + tristate "ALI 15x3" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces. + + This driver can also be built as a module. If so, the module + will be called i2c-ali15x3. + +config I2C_AMD756 + tristate "AMD 756/766/768/8111 and nVidia nForce" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the AMD + 756/766/768 mainboard I2C interfaces. The driver also includes + support for the first (SMBus 1.0) I2C interface of the AMD 8111 and + the nVidia nForce I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-amd756. + +config I2C_AMD756_S4882 + tristate "SMBus multiplexing on the Tyan S4882" + depends on I2C_AMD756 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 8 different channels, where the various memory module EEPROMs + and temperature sensors live. Saying yes here will give you access + to these in addition to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-amd756-s4882. + +config I2C_AMD8111 + tristate "AMD 8111" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + second (SMBus 2.0) AMD 8111 mainboard I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-amd8111. + +config I2C_AU1550 + tristate "Au1550 SMBus interface" + depends on I2C && SOC_AU1550 + help + If you say yes to this option, support will be included for the + Au1550 SMBus interface. + + This driver can also be built as a module. If so, the module + will be called i2c-au1550. + +config I2C_ELEKTOR + tristate "Elektor ISA card" + depends on I2C && ISA && BROKEN_ON_SMP + select I2C_ALGOPCF + help + This supports the PCF8584 ISA bus I2C adapter. Say Y if you own + such an adapter. + + This support is also available as a module. If so, the module + will be called i2c-elektor. + +config I2C_HYDRA + tristate "CHRP Apple Hydra Mac I/O I2C interface" + depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL + select I2C_ALGOBIT + help + This supports the use of the I2C interface in the Apple Hydra Mac + I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you + have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-hydra. + +config I2C_I801 + tristate "Intel 82801 (ICH)" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the Intel + 801 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported: + 82801AA + 82801AB + 82801BA + 82801CA/CAM + 82801DB + 82801EB/ER (ICH5/ICH5R) + 6300ESB + ICH6 + ICH7 + + This driver can also be built as a module. If so, the module + will be called i2c-i801. + +config I2C_I810 + tristate "Intel 810/815" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the Intel + 810/815 family of mainboard I2C interfaces. Specifically, the + following versions of the chipset is supported: + i810AA + i810AB + i810E + i815 + + This driver can also be built as a module. If so, the module + will be called i2c-i810. + +config I2C_PIIX4 + tristate "Intel PIIX4" + depends on I2C && PCI + help + If you say yes to this option, support will be included for the Intel + PIIX4 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported: + Intel PIIX4 + Intel 440MX + Serverworks OSB4 + Serverworks CSB5 + Serverworks CSB6 + SMSC Victory66 + + This driver can also be built as a module. If so, the module + will be called i2c-piix4. + +config I2C_IBM_IIC + tristate "IBM PPC 4xx on-chip I2C interface" + depends on IBM_OCP && I2C + help + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-ibm_iic. + +config I2C_IOP3XX + tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" + depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C + help + Say Y here if you want to use the IIC bus controller on + the Intel IOP3xx I/O Processors or IXP4xx Network Processors. + + This driver can also be built as a module. If so, the module + will be called i2c-iop3xx. + +config I2C_ISA + tristate "ISA Bus support" + depends on I2C && EXPERIMENTAL + help + If you say yes to this option, support will be included for i2c + interfaces that are on the ISA bus. + + This driver can also be built as a module. If so, the module + will be called i2c-isa. + +config I2C_ITE + tristate "ITE I2C Adapter" + depends on I2C && MIPS_ITE8172 + select I2C_ALGOITE + help + This supports the ITE8172 I2C peripheral found on some MIPS + systems. Say Y if you have one of these. You should also say Y for + the ITE I2C driver algorithm support above. + + This support is also available as a module. If so, the module + will be called i2c-ite. + +config I2C_IXP4XX + tristate "IXP4xx GPIO-Based I2C Interface" + depends on I2C && ARCH_IXP4XX + select I2C_ALGOBIT + help + Say Y here if you have an Intel IXP4xx(420,421,422,425) based + system and are using GPIO lines for an I2C bus. + + This support is also available as a module. If so, the module + will be called i2c-ixp4xx. + +config I2C_IXP2000 + tristate "IXP2000 GPIO-Based I2C Interface" + depends on I2C && ARCH_IXP2000 + select I2C_ALGOBIT + help + Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based + system and are using GPIO lines for an I2C bus. + + This support is also available as a module. If so, the module + will be called i2c-ixp2000. + +config I2C_KEYWEST + tristate "Powermac Keywest I2C interface" + depends on I2C && PPC_PMAC + help + This supports the use of the I2C interface in the combo-I/O + chip on recent Apple machines. Say Y if you have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-keywest. + +config I2C_MPC + tristate "MPC107/824x/85xx/52xx" + depends on I2C && PPC + help + If you say yes to this option, support will be included for the + built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and + MPC85xx family processors. The driver may also work on 52xx + family processors, though interrupts are known not to work. + + This driver can also be built as a module. If so, the module + will be called i2c-mpc. + +config I2C_NFORCE2 + tristate "Nvidia Nforce2" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the Nvidia + Nforce2 family of mainboard I2C interfaces. + This driver also supports the nForce3 Pro 150 MCP. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2. + +config I2C_PARPORT + tristate "Parallel port adapter" + depends on I2C && PARPORT + select I2C_ALGOBIT + help + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. + + This driver is a replacement for (and was inspired by) an older + driver named i2c-philips-par. The new driver supports more devices, + and makes it easier to add support for new devices. + + Another driver exists, named i2c-parport-light, which doesn't depend + on the parport driver. This is meant for embedded systems. Don't say + Y here if you intend to say Y or M there. + + This support is also available as a module. If so, the module + will be called i2c-parport. + +config I2C_PARPORT_LIGHT + tristate "Parallel port adapter (light)" + depends on I2C + select I2C_ALGOBIT + help + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. + + This driver is a light version of i2c-parport. It doesn't depend + on the parport driver, and uses direct I/O access instead. This + might be prefered on embedded systems where wasting memory for + the clean but heavy parport handling is not an option. The + drawback is a reduced portability and the impossibility to + dasiy-chain other parallel port devices. + + Don't say Y here if you said Y or M to i2c-parport. Saying M to + both is possible but both modules should not be loaded at the same + time. + + This support is also available as a module. If so, the module + will be called i2c-parport-light. + +config I2C_PROSAVAGE + tristate "S3/VIA (Pro)Savage" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 + graphics processors. + chipsets supported: + S3/VIA KM266/VT8375 aka ProSavage8 + S3/VIA KM133/VT8365 aka Savage4 + + This support is also available as a module. If so, the module + will be called i2c-prosavage. + +config I2C_RPXLITE + tristate "Embedded Planet RPX Lite/Classic support" + depends on (RPXLITE || RPXCLASSIC) && I2C + select I2C_ALGO8XX + +config I2C_S3C2410 + tristate "S3C2410 I2C Driver" + depends on I2C && ARCH_S3C2410 + help + Say Y here to include support for I2C controller in the + Samsung S3C2410 based System-on-Chip devices. + +config I2C_SAVAGE4 + tristate "S3 Savage 4" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + S3 Savage 4 I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-savage4. + +config I2C_SIBYTE + tristate "SiByte SMBus interface" + depends on SIBYTE_SB1xxx_SOC && I2C + help + Supports the SiByte SOC on-chip I2C interfaces (2 channels). + +config SCx200_I2C + tristate "NatSemi SCx200 I2C using GPIO pins" + depends on SCx200_GPIO && I2C + select I2C_ALGOBIT + help + Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_i2c. + +config SCx200_I2C_SCL + int "GPIO pin used for SCL" + depends on SCx200_I2C + default "12" + help + Enter the GPIO pin number used for the SCL signal. This value can + also be specified with a module parameter. + +config SCx200_I2C_SDA + int "GPIO pin used for SDA" + depends on SCx200_I2C + default "13" + help + Enter the GPIO pin number used for the SSA signal. This value can + also be specified with a module parameter. + +config SCx200_ACB + tristate "NatSemi SCx200 ACCESS.bus" + depends on I2C && PCI + help + Enable the use of the ACCESS.bus controllers of a SCx200 processor. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_acb. + +config I2C_SIS5595 + tristate "SiS 5595" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + SiS5595 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis5595. + +config I2C_SIS630 + tristate "SiS 630/730" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + SiS630 and SiS730 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis630. + +config I2C_SIS96X + tristate "SiS 96x" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SiS + 96x SMBus (a subset of I2C) interfaces. Specifically, the following + chipsets are supported: + 645/961 + 645DX/961 + 645DX/962 + 648/961 + 650/961 + 735 + + This driver can also be built as a module. If so, the module + will be called i2c-sis96x. + +config I2C_STUB + tristate "I2C/SMBus Test Stub" + depends on I2C && EXPERIMENTAL && 'm' + default 'n' + help + This module may be useful to developers of SMBus client drivers, + especially for certain kinds of sensor chips. + + If you do build this module, be sure to read the notes and warnings + in <file:Documentation/i2c/i2c-stub>. + + If you don't know what to do here, definitely say N. + +config I2C_VIA + tristate "VIA 82C586B" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the VIA + 82C586B I2C interface + + This driver can also be built as a module. If so, the module + will be called i2c-via. + +config I2C_VIAPRO + tristate "VIA 82C596/82C686/823x" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the VIA + 82C596/82C686/823x I2C interfaces. Specifically, the following + chipsets are supported: + 82C596A/B + 82C686A/B + 8231 + 8233 + 8233A + 8235 + 8237 + + This driver can also be built as a module. If so, the module + will be called i2c-viapro. + +config I2C_VOODOO3 + tristate "Voodoo 3" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + Voodoo 3 I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-voodoo3. + +config I2C_PCA_ISA + tristate "PCA9564 on an ISA bus" + depends on I2C + select I2C_ALGOPCA + help + This driver supports ISA boards using the Philips PCA 9564 + Parallel bus to I2C bus controller + + This driver can also be built as a module. If so, the module + will be called i2c-pca-isa. + +config I2C_MV64XXX + tristate "Marvell mv64xxx I2C Controller" + depends on I2C && MV64X60 && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Marvell 64xxx line of host bridges. + + This driver can also be built as a module. If so, the module + will be called i2c-mv64xxx. + +endmenu diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile new file mode 100644 index 00000000000..42d6d814da7 --- /dev/null +++ b/drivers/i2c/busses/Makefile @@ -0,0 +1,47 @@ +# +# Makefile for the i2c bus drivers. +# + +obj-$(CONFIG_I2C_ALI1535) += i2c-ali1535.o +obj-$(CONFIG_I2C_ALI1563) += i2c-ali1563.o +obj-$(CONFIG_I2C_ALI15X3) += i2c-ali15x3.o +obj-$(CONFIG_I2C_AMD756) += i2c-amd756.o +obj-$(CONFIG_I2C_AMD756_S4882) += i2c-amd756-s4882.o +obj-$(CONFIG_I2C_AMD8111) += i2c-amd8111.o +obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o +obj-$(CONFIG_I2C_ELEKTOR) += i2c-elektor.o +obj-$(CONFIG_I2C_HYDRA) += i2c-hydra.o +obj-$(CONFIG_I2C_I801) += i2c-i801.o +obj-$(CONFIG_I2C_I810) += i2c-i810.o +obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o +obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o +obj-$(CONFIG_I2C_ISA) += i2c-isa.o +obj-$(CONFIG_I2C_ITE) += i2c-ite.o +obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o +obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o +obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o +obj-$(CONFIG_I2C_MPC) += i2c-mpc.o +obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o +obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o +obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o +obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o +obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o +obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o +obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o +obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o +obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o +obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o +obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o +obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o +obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o +obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o +obj-$(CONFIG_I2C_STUB) += i2c-stub.o +obj-$(CONFIG_I2C_VIA) += i2c-via.o +obj-$(CONFIG_I2C_VIAPRO) += i2c-viapro.o +obj-$(CONFIG_I2C_VOODOO3) += i2c-voodoo3.o +obj-$(CONFIG_SCx200_ACB) += scx200_acb.o +obj-$(CONFIG_SCx200_I2C) += scx200_i2c.o + +ifeq ($(CONFIG_I2C_DEBUG_BUS),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c new file mode 100644 index 00000000000..b00cd409822 --- /dev/null +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -0,0 +1,543 @@ +/* + i2c-ali1535.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 2000 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + Mark D. Studebaker <mdsxyz123@yahoo.com>, + Dan Eaton <dan.eaton@rocketlogix.com> and + Stephen Rousset<stephen.rousset@rocketlogix.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + This is the driver for the SMB Host controller on + Acer Labs Inc. (ALI) M1535 South Bridge. + + The M1535 is a South bridge for portable systems. + It is very similar to the M15x3 South bridges also produced + by Acer Labs Inc. Some of the registers within the part + have moved and some have been redefined slightly. Additionally, + the sequencing of the SMBus transactions has been modified + to be more consistent with the sequencing recommended by + the manufacturer and observed through testing. These + changes are reflected in this driver and can be identified + by comparing this driver to the i2c-ali15x3 driver. + For an overview of these chips see http://www.acerlabs.com + + The SMB controller is part of the 7101 device, which is an + ACPI-compliant Power Management Unit (PMU). + + The whole 7101 device has to be enabled for the SMB to work. + You can't just enable the SMB alone. + The SMB and the ACPI have separate I/O spaces. + We make sure that the SMB is enabled. We leave the ACPI alone. + + This driver controls the SMB Host only. + + This driver does not use interrupts. +*/ + + +/* Note: we assume there can only be one ALI1535, with one SMBus interface */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/semaphore.h> + + +/* ALI1535 SMBus address offsets */ +#define SMBHSTSTS (0 + ali1535_smba) +#define SMBHSTTYP (1 + ali1535_smba) +#define SMBHSTPORT (2 + ali1535_smba) +#define SMBHSTCMD (7 + ali1535_smba) +#define SMBHSTADD (3 + ali1535_smba) +#define SMBHSTDAT0 (4 + ali1535_smba) +#define SMBHSTDAT1 (5 + ali1535_smba) +#define SMBBLKDAT (6 + ali1535_smba) + +/* PCI Address Constants */ +#define SMBCOM 0x004 +#define SMBREV 0x008 +#define SMBCFG 0x0D1 +#define SMBBA 0x0E2 +#define SMBHSTCFG 0x0F0 +#define SMBCLK 0x0F2 + +/* Other settings */ +#define MAX_TIMEOUT 500 /* times 1/100 sec */ +#define ALI1535_SMB_IOSIZE 32 + +#define ALI1535_SMB_DEFAULTBASE 0x8040 + +/* ALI1535 address lock bits */ +#define ALI1535_LOCK 0x06 /* dwe */ + +/* ALI1535 command constants */ +#define ALI1535_QUICK 0x00 +#define ALI1535_BYTE 0x10 +#define ALI1535_BYTE_DATA 0x20 +#define ALI1535_WORD_DATA 0x30 +#define ALI1535_BLOCK_DATA 0x40 +#define ALI1535_I2C_READ 0x60 + +#define ALI1535_DEV10B_EN 0x80 /* Enable 10-bit addressing in */ + /* I2C read */ +#define ALI1535_T_OUT 0x08 /* Time-out Command (write) */ +#define ALI1535_A_HIGH_BIT9 0x08 /* Bit 9 of 10-bit address in */ + /* Alert-Response-Address */ + /* (read) */ +#define ALI1535_KILL 0x04 /* Kill Command (write) */ +#define ALI1535_A_HIGH_BIT8 0x04 /* Bit 8 of 10-bit address in */ + /* Alert-Response-Address */ + /* (read) */ + +#define ALI1535_D_HI_MASK 0x03 /* Mask for isolating bits 9-8 */ + /* of 10-bit address in I2C */ + /* Read Command */ + +/* ALI1535 status register bits */ +#define ALI1535_STS_IDLE 0x04 +#define ALI1535_STS_BUSY 0x08 /* host busy */ +#define ALI1535_STS_DONE 0x10 /* transaction complete */ +#define ALI1535_STS_DEV 0x20 /* device error */ +#define ALI1535_STS_BUSERR 0x40 /* bus error */ +#define ALI1535_STS_FAIL 0x80 /* failed bus transaction */ +#define ALI1535_STS_ERR 0xE0 /* all the bad error bits */ + +#define ALI1535_BLOCK_CLR 0x04 /* reset block data index */ + +/* ALI1535 device address register bits */ +#define ALI1535_RD_ADDR 0x01 /* Read/Write Bit in Device */ + /* Address field */ + /* -> Write = 0 */ + /* -> Read = 1 */ +#define ALI1535_SMBIO_EN 0x04 /* SMB I/O Space enable */ + + +static unsigned short ali1535_smba; +static DECLARE_MUTEX(i2c_ali1535_sem); + +/* Detect whether a ALI1535 can be found, and initialize it, where necessary. + Note the differences between kernels with the old PCI BIOS interface and + newer kernels with the real PCI interface. In compat.h some things are + defined to make the transition easier. */ +static int ali1535_setup(struct pci_dev *dev) +{ + int retval = -ENODEV; + unsigned char temp; + + /* Check the following things: + - SMB I/O address is initialized + - Device is enabled + - We can use the addresses + */ + + /* Determine the address of the SMBus area */ + pci_read_config_word(dev, SMBBA, &ali1535_smba); + ali1535_smba &= (0xffff & ~(ALI1535_SMB_IOSIZE - 1)); + if (ali1535_smba == 0) { + dev_warn(&dev->dev, + "ALI1535_smb region uninitialized - upgrade BIOS?\n"); + goto exit; + } + + if (!request_region(ali1535_smba, ALI1535_SMB_IOSIZE, "ali1535-smb")) { + dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n", + ali1535_smba); + goto exit; + } + + /* check if whole device is enabled */ + pci_read_config_byte(dev, SMBCFG, &temp); + if ((temp & ALI1535_SMBIO_EN) == 0) { + dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n"); + goto exit_free; + } + + /* Is SMB Host controller enabled? */ + pci_read_config_byte(dev, SMBHSTCFG, &temp); + if ((temp & 1) == 0) { + dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n"); + goto exit_free; + } + + /* set SMB clock to 74KHz as recommended in data sheet */ + pci_write_config_byte(dev, SMBCLK, 0x20); + + /* + The interrupt routing for SMB is set up in register 0x77 in the + 1533 ISA Bridge device, NOT in the 7101 device. + Don't bother with finding the 1533 device and reading the register. + if ((....... & 0x0F) == 1) + dev_dbg(&dev->dev, "ALI1535 using Interrupt 9 for SMBus.\n"); + */ + pci_read_config_byte(dev, SMBREV, &temp); + dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba); + + retval = 0; +exit: + return retval; + +exit_free: + release_region(ali1535_smba, ALI1535_SMB_IOSIZE); + return retval; +} + +static int ali1535_transaction(struct i2c_adapter *adap) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, TYP=%02x, " + "CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", + inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD), + inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); + + /* get status */ + temp = inb_p(SMBHSTSTS); + + /* Make sure the SMBus host is ready to start transmitting */ + /* Check the busy bit first */ + if (temp & ALI1535_STS_BUSY) { + /* If the host controller is still busy, it may have timed out + * in the previous transaction, resulting in a "SMBus Timeout" + * printk. I've tried the following to reset a stuck busy bit. + * 1. Reset the controller with an KILL command. (this + * doesn't seem to clear the controller if an external + * device is hung) + * 2. Reset the controller and the other SMBus devices with a + * T_OUT command. (this clears the host busy bit if an + * external device is hung, but it comes back upon a new + * access to a device) + * 3. Disable and reenable the controller in SMBHSTCFG. Worst + * case, nothing seems to work except power reset. + */ + + /* Try resetting entire SMB bus, including other devices - This + * may not work either - it clears the BUSY bit but then the + * BUSY bit may come back on when you try and use the chip + * again. If that's the case you are stuck. + */ + dev_info(&adap->dev, + "Resetting entire SMB Bus to clear busy condition (%02x)\n", + temp); + outb_p(ALI1535_T_OUT, SMBHSTTYP); + temp = inb_p(SMBHSTSTS); + } + + /* now check the error bits and the busy bit */ + if (temp & (ALI1535_STS_ERR | ALI1535_STS_BUSY)) { + /* do a clear-on-write */ + outb_p(0xFF, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) & + (ALI1535_STS_ERR | ALI1535_STS_BUSY)) { + /* This is probably going to be correctable only by a + * power reset as one of the bits now appears to be + * stuck */ + /* This may be a bus or device with electrical problems. */ + dev_err(&adap->dev, + "SMBus reset failed! (0x%02x) - controller or " + "device on bus is probably hung\n", temp); + return -1; + } + } else { + /* check and clear done bit */ + if (temp & ALI1535_STS_DONE) { + outb_p(temp, SMBHSTSTS); + } + } + + /* start the transaction by writing anything to the start register */ + outb_p(0xFF, SMBHSTPORT); + + /* We will always wait for a fraction of a second! */ + timeout = 0; + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while (((temp & ALI1535_STS_BUSY) && !(temp & ALI1535_STS_IDLE)) + && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + result = -1; + dev_err(&adap->dev, "SMBus Timeout!\n"); + } + + if (temp & ALI1535_STS_FAIL) { + result = -1; + dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); + } + + /* Unfortunately the ALI SMB controller maps "no response" and "bus + * collision" into a single bit. No reponse is the usual case so don't + * do a printk. This means that bus collisions go unreported. + */ + if (temp & ALI1535_STS_BUSERR) { + result = -1; + dev_dbg(&adap->dev, + "Error: no response or bus collision ADD=%02x\n", + inb_p(SMBHSTADD)); + } + + /* haven't ever seen this */ + if (temp & ALI1535_STS_DEV) { + result = -1; + dev_err(&adap->dev, "Error: device error\n"); + } + + /* check to see if the "command complete" indication is set */ + if (!(temp & ALI1535_STS_DONE)) { + result = -1; + dev_err(&adap->dev, "Error: command never completed\n"); + } + + dev_dbg(&adap->dev, "Transaction (post): STS=%02x, TYP=%02x, " + "CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", + inb_p(SMBHSTSTS), inb_p(SMBHSTTYP), inb_p(SMBHSTCMD), + inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); + + /* take consequent actions for error conditions */ + if (!(temp & ALI1535_STS_DONE)) { + /* issue "kill" to reset host controller */ + outb_p(ALI1535_KILL,SMBHSTTYP); + outb_p(0xFF,SMBHSTSTS); + } else if (temp & ALI1535_STS_ERR) { + /* issue "timeout" to reset all devices on bus */ + outb_p(ALI1535_T_OUT,SMBHSTTYP); + outb_p(0xFF,SMBHSTSTS); + } + + return result; +} + +/* Return -1 on error. */ +static s32 ali1535_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + int i, len; + int temp; + int timeout; + s32 result = 0; + + down(&i2c_ali1535_sem); + /* make sure SMBus is idle */ + temp = inb_p(SMBHSTSTS); + for (timeout = 0; + (timeout < MAX_TIMEOUT) && !(temp & ALI1535_STS_IDLE); + timeout++) { + msleep(1); + temp = inb_p(SMBHSTSTS); + } + if (timeout >= MAX_TIMEOUT) + dev_warn(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp); + + /* clear status register (clear-on-write) */ + outb_p(0xFF, SMBHSTSTS); + + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + result = -1; + goto EXIT; + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = ALI1535_QUICK; + outb_p(size, SMBHSTTYP); /* output command */ + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = ALI1535_BYTE; + outb_p(size, SMBHSTTYP); /* output command */ + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = ALI1535_BYTE_DATA; + outb_p(size, SMBHSTTYP); /* output command */ + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = ALI1535_WORD_DATA; + outb_p(size, SMBHSTTYP); /* output command */ + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = ALI1535_BLOCK_DATA; + outb_p(size, SMBHSTTYP); /* output command */ + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) { + len = 0; + data->block[0] = len; + } + if (len > 32) { + len = 32; + data->block[0] = len; + } + outb_p(len, SMBHSTDAT0); + /* Reset SMBBLKDAT */ + outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP); + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + break; + } + + if (ali1535_transaction(adap)) { + /* Error in transaction */ + result = -1; + goto EXIT; + } + + if ((read_write == I2C_SMBUS_WRITE) || (size == ALI1535_QUICK)) { + result = 0; + goto EXIT; + } + + switch (size) { + case ALI1535_BYTE: /* Result put in SMBHSTDAT0 */ + data->byte = inb_p(SMBHSTDAT0); + break; + case ALI1535_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case ALI1535_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case ALI1535_BLOCK_DATA: + len = inb_p(SMBHSTDAT0); + if (len > 32) + len = 32; + data->block[0] = len; + /* Reset SMBBLKDAT */ + outb_p(inb_p(SMBHSTTYP) | ALI1535_BLOCK_CLR, SMBHSTTYP); + for (i = 1; i <= data->block[0]; i++) { + data->block[i] = inb_p(SMBBLKDAT); + dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n", + len, i, data->block[i]); + } + break; + } +EXIT: + up(&i2c_ali1535_sem); + return result; +} + + +static u32 ali1535_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-i2c SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = ali1535_access, + .functionality = ali1535_func, +}; + +static struct i2c_adapter ali1535_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static struct pci_device_id ali1535_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, + { }, +}; + +MODULE_DEVICE_TABLE (pci, ali1535_ids); + +static int __devinit ali1535_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + if (ali1535_setup(dev)) { + dev_warn(&dev->dev, + "ALI1535 not detected, module not inserted.\n"); + return -ENODEV; + } + + /* set up the driverfs linkage to our parent device */ + ali1535_adapter.dev.parent = &dev->dev; + + snprintf(ali1535_adapter.name, I2C_NAME_SIZE, + "SMBus ALI1535 adapter at %04x", ali1535_smba); + return i2c_add_adapter(&ali1535_adapter); +} + +static void __devexit ali1535_remove(struct pci_dev *dev) +{ + i2c_del_adapter(&ali1535_adapter); + release_region(ali1535_smba, ALI1535_SMB_IOSIZE); +} + +static struct pci_driver ali1535_driver = { + .name = "ali1535_smbus", + .id_table = ali1535_ids, + .probe = ali1535_probe, + .remove = __devexit_p(ali1535_remove), +}; + +static int __init i2c_ali1535_init(void) +{ + return pci_register_driver(&ali1535_driver); +} + +static void __exit i2c_ali1535_exit(void) +{ + pci_unregister_driver(&ali1535_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "Mark D. Studebaker <mdsxyz123@yahoo.com> " + "and Dan Eaton <dan.eaton@rocketlogix.com>"); +MODULE_DESCRIPTION("ALI1535 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_ali1535_init); +module_exit(i2c_ali1535_exit); diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c new file mode 100644 index 00000000000..35710818fe4 --- /dev/null +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -0,0 +1,415 @@ +/** + * i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge + * + * Copyright (C) 2004 Patrick Mochel + * + * The 1563 southbridge is deceptively similar to the 1533, with a + * few notable exceptions. One of those happens to be the fact they + * upgraded the i2c core to be 2.0 compliant, and happens to be almost + * identical to the i2c controller found in the Intel 801 south + * bridges. + * + * This driver is based on a mix of the 15x3, 1535, and i801 drivers, + * with a little help from the ALi 1563 spec. + * + * This file is released under the GPLv2 + */ + +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/pci.h> +#include <linux/init.h> + +#define ALI1563_MAX_TIMEOUT 500 +#define ALI1563_SMBBA 0x80 +#define ALI1563_SMB_IOEN 1 +#define ALI1563_SMB_HOSTEN 2 +#define ALI1563_SMB_IOSIZE 16 + +#define SMB_HST_STS (ali1563_smba + 0) +#define SMB_HST_CNTL1 (ali1563_smba + 1) +#define SMB_HST_CNTL2 (ali1563_smba + 2) +#define SMB_HST_CMD (ali1563_smba + 3) +#define SMB_HST_ADD (ali1563_smba + 4) +#define SMB_HST_DAT0 (ali1563_smba + 5) +#define SMB_HST_DAT1 (ali1563_smba + 6) +#define SMB_BLK_DAT (ali1563_smba + 7) + +#define HST_STS_BUSY 0x01 +#define HST_STS_INTR 0x02 +#define HST_STS_DEVERR 0x04 +#define HST_STS_BUSERR 0x08 +#define HST_STS_FAIL 0x10 +#define HST_STS_DONE 0x80 +#define HST_STS_BAD 0x1c + + +#define HST_CNTL1_TIMEOUT 0x80 +#define HST_CNTL1_LAST 0x40 + +#define HST_CNTL2_KILL 0x04 +#define HST_CNTL2_START 0x40 +#define HST_CNTL2_QUICK 0x00 +#define HST_CNTL2_BYTE 0x01 +#define HST_CNTL2_BYTE_DATA 0x02 +#define HST_CNTL2_WORD_DATA 0x03 +#define HST_CNTL2_BLOCK 0x05 + + + +static unsigned short ali1563_smba; + +static int ali1563_transaction(struct i2c_adapter * a) +{ + u32 data; + int timeout; + + dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, " + "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", + inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), + inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), + inb_p(SMB_HST_DAT1)); + + data = inb_p(SMB_HST_STS); + if (data & HST_STS_BAD) { + dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); + outb_p(data | HST_STS_BAD,SMB_HST_STS); + data = inb_p(SMB_HST_STS); + if (data & HST_STS_BAD) + return -EBUSY; + } + outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); + + timeout = ALI1563_MAX_TIMEOUT; + do + msleep(1); + while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout); + + dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, " + "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", + inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), + inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), + inb_p(SMB_HST_DAT1)); + + if (timeout && !(data & HST_STS_BAD)) + return 0; + dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", + timeout ? "Timeout " : "", + data & HST_STS_FAIL ? "Transaction Failed " : "", + data & HST_STS_BUSERR ? "No response or Bus Collision " : "", + data & HST_STS_DEVERR ? "Device Error " : "", + !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); + + if (!(data & HST_STS_DONE)) + /* Issue 'kill' to host controller */ + outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2); + else + /* Issue timeout to reset all devices on bus */ + outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1); + return -1; +} + +static int ali1563_block_start(struct i2c_adapter * a) +{ + u32 data; + int timeout; + + dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, " + "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", + inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), + inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), + inb_p(SMB_HST_DAT1)); + + data = inb_p(SMB_HST_STS); + if (data & HST_STS_BAD) { + dev_warn(&a->dev,"ali1563: Trying to reset busy device\n"); + outb_p(data | HST_STS_BAD,SMB_HST_STS); + data = inb_p(SMB_HST_STS); + if (data & HST_STS_BAD) + return -EBUSY; + } + + /* Clear byte-ready bit */ + outb_p(data | HST_STS_DONE, SMB_HST_STS); + + /* Start transaction and wait for byte-ready bit to be set */ + outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2); + + timeout = ALI1563_MAX_TIMEOUT; + do + msleep(1); + while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout); + + dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, " + "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n", + inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2), + inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0), + inb_p(SMB_HST_DAT1)); + + if (timeout && !(data & HST_STS_BAD)) + return 0; + dev_warn(&a->dev, "SMBus Error: %s%s%s%s%s\n", + timeout ? "Timeout " : "", + data & HST_STS_FAIL ? "Transaction Failed " : "", + data & HST_STS_BUSERR ? "No response or Bus Collision " : "", + data & HST_STS_DEVERR ? "Device Error " : "", + !(data & HST_STS_DONE) ? "Transaction Never Finished " : ""); + return -1; +} + +static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw) +{ + int i, len; + int error = 0; + + /* Do we need this? */ + outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1); + + if (rw == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 1) + len = 1; + else if (len > 32) + len = 32; + outb_p(len,SMB_HST_DAT0); + outb_p(data->block[1],SMB_BLK_DAT); + } else + len = 32; + + outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2); + + for (i = 0; i < len; i++) { + if (rw == I2C_SMBUS_WRITE) { + outb_p(data->block[i + 1], SMB_BLK_DAT); + if ((error = ali1563_block_start(a))) + break; + } else { + if ((error = ali1563_block_start(a))) + break; + if (i == 0) { + len = inb_p(SMB_HST_DAT0); + if (len < 1) + len = 1; + else if (len > 32) + len = 32; + } + data->block[i+1] = inb_p(SMB_BLK_DAT); + } + } + /* Do we need this? */ + outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1); + return error; +} + +static s32 ali1563_access(struct i2c_adapter * a, u16 addr, + unsigned short flags, char rw, u8 cmd, + int size, union i2c_smbus_data * data) +{ + int error = 0; + int timeout; + u32 reg; + + for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) { + if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY)) + break; + } + if (!timeout) + dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg); + outb_p(0xff,SMB_HST_STS); + + /* Map the size to what the chip understands */ + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_err(&a->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + error = -EINVAL; + break; + case I2C_SMBUS_QUICK: + size = HST_CNTL2_QUICK; + break; + case I2C_SMBUS_BYTE: + size = HST_CNTL2_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + size = HST_CNTL2_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + size = HST_CNTL2_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + size = HST_CNTL2_BLOCK; + break; + } + + outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD); + outb_p(inb_p(SMB_HST_CNTL2) | (size << 3), SMB_HST_CNTL2); + + /* Write the command register */ + switch(size) { + case HST_CNTL2_BYTE: + if (rw== I2C_SMBUS_WRITE) + outb_p(cmd, SMB_HST_CMD); + break; + case HST_CNTL2_BYTE_DATA: + outb_p(cmd, SMB_HST_CMD); + if (rw == I2C_SMBUS_WRITE) + outb_p(data->byte, SMB_HST_DAT0); + break; + case HST_CNTL2_WORD_DATA: + outb_p(cmd, SMB_HST_CMD); + if (rw == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMB_HST_DAT0); + outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1); + } + break; + case HST_CNTL2_BLOCK: + outb_p(cmd, SMB_HST_CMD); + error = ali1563_block(a,data,rw); + goto Done; + } + + if ((error = ali1563_transaction(a))) + goto Done; + + if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK)) + goto Done; + + switch (size) { + case HST_CNTL2_BYTE: /* Result put in SMBHSTDAT0 */ + data->byte = inb_p(SMB_HST_DAT0); + break; + case HST_CNTL2_BYTE_DATA: + data->byte = inb_p(SMB_HST_DAT0); + break; + case HST_CNTL2_WORD_DATA: + data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8); + break; + } +Done: + return error; +} + +static u32 ali1563_func(struct i2c_adapter * a) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + + +static void ali1563_enable(struct pci_dev * dev) +{ + u16 ctrl; + + pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); + ctrl |= 0x7; + pci_write_config_word(dev,ALI1563_SMBBA,ctrl); +} + +static int __devinit ali1563_setup(struct pci_dev * dev) +{ + u16 ctrl; + + pci_read_config_word(dev,ALI1563_SMBBA,&ctrl); + printk("ali1563: SMBus control = %04x\n",ctrl); + + /* Check if device is even enabled first */ + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_warn(&dev->dev,"I/O space not enabled, trying manually\n"); + ali1563_enable(dev); + } + if (!(ctrl & ALI1563_SMB_IOEN)) { + dev_warn(&dev->dev,"I/O space still not enabled, giving up\n"); + goto Err; + } + if (!(ctrl & ALI1563_SMB_HOSTEN)) { + dev_warn(&dev->dev,"Host Controller not enabled\n"); + goto Err; + } + + /* SMB I/O Base in high 12 bits and must be aligned with the + * size of the I/O space. */ + ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1); + if (!ali1563_smba) { + dev_warn(&dev->dev,"ali1563_smba Uninitialized\n"); + goto Err; + } + if (!request_region(ali1563_smba,ALI1563_SMB_IOSIZE,"i2c-ali1563")) { + dev_warn(&dev->dev,"Could not allocate I/O space"); + goto Err; + } + + return 0; +Err: + return -ENODEV; +} + +static void ali1563_shutdown(struct pci_dev *dev) +{ + release_region(ali1563_smba,ALI1563_SMB_IOSIZE); +} + +static struct i2c_algorithm ali1563_algorithm = { + .name = "Non-i2c SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = ali1563_access, + .functionality = ali1563_func, +}; + +static struct i2c_adapter ali1563_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &ali1563_algorithm, +}; + +static int __devinit ali1563_probe(struct pci_dev * dev, + const struct pci_device_id * id_table) +{ + int error; + + if ((error = ali1563_setup(dev))) + return error; + ali1563_adapter.dev.parent = &dev->dev; + sprintf(ali1563_adapter.name,"SMBus ALi 1563 Adapter @ %04x", + ali1563_smba); + if ((error = i2c_add_adapter(&ali1563_adapter))) + ali1563_shutdown(dev); + printk("%s: Returning %d\n",__FUNCTION__,error); + return error; +} + +static void __devexit ali1563_remove(struct pci_dev * dev) +{ + i2c_del_adapter(&ali1563_adapter); + ali1563_shutdown(dev); +} + +static struct pci_device_id __devinitdata ali1563_id_table[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) }, + {}, +}; + +MODULE_DEVICE_TABLE (pci, ali1563_id_table); + +static struct pci_driver ali1563_pci_driver = { + .name = "ali1563_i2c", + .id_table = ali1563_id_table, + .probe = ali1563_probe, + .remove = __devexit_p(ali1563_remove), +}; + +static int __init ali1563_init(void) +{ + return pci_register_driver(&ali1563_pci_driver); +} + +module_init(ali1563_init); + +static void __exit ali1563_exit(void) +{ + pci_unregister_driver(&ali1563_pci_driver); +} + +module_exit(ali1563_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c new file mode 100644 index 00000000000..5bd6a4a77c1 --- /dev/null +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -0,0 +1,532 @@ +/* + ali15x3.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1999 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> and + Mark D. Studebaker <mdsxyz123@yahoo.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + This is the driver for the SMB Host controller on + Acer Labs Inc. (ALI) M1541 and M1543C South Bridges. + + The M1543C is a South bridge for desktop systems. + The M1533 is a South bridge for portable systems. + They are part of the following ALI chipsets: + "Aladdin Pro 2": Includes the M1621 Slot 1 North bridge + with AGP and 100MHz CPU Front Side bus + "Aladdin V": Includes the M1541 Socket 7 North bridge + with AGP and 100MHz CPU Front Side bus + "Aladdin IV": Includes the M1541 Socket 7 North bridge + with host bus up to 83.3 MHz. + For an overview of these chips see http://www.acerlabs.com + + The M1533/M1543C devices appear as FOUR separate devices + on the PCI bus. An output of lspci will show something similar + to the following: + + 00:02.0 USB Controller: Acer Laboratories Inc. M5237 + 00:03.0 Bridge: Acer Laboratories Inc. M7101 + 00:07.0 ISA bridge: Acer Laboratories Inc. M1533 + 00:0f.0 IDE interface: Acer Laboratories Inc. M5229 + + The SMB controller is part of the 7101 device, which is an + ACPI-compliant Power Management Unit (PMU). + + The whole 7101 device has to be enabled for the SMB to work. + You can't just enable the SMB alone. + The SMB and the ACPI have separate I/O spaces. + We make sure that the SMB is enabled. We leave the ACPI alone. + + This driver controls the SMB Host only. + The SMB Slave controller on the M15X3 is not enabled. + + This driver does not use interrupts. +*/ + +/* Note: we assume there can only be one ALI15X3, with one SMBus interface */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <asm/io.h> + +/* ALI15X3 SMBus address offsets */ +#define SMBHSTSTS (0 + ali15x3_smba) +#define SMBHSTCNT (1 + ali15x3_smba) +#define SMBHSTSTART (2 + ali15x3_smba) +#define SMBHSTCMD (7 + ali15x3_smba) +#define SMBHSTADD (3 + ali15x3_smba) +#define SMBHSTDAT0 (4 + ali15x3_smba) +#define SMBHSTDAT1 (5 + ali15x3_smba) +#define SMBBLKDAT (6 + ali15x3_smba) + +/* PCI Address Constants */ +#define SMBCOM 0x004 +#define SMBBA 0x014 +#define SMBATPC 0x05B /* used to unlock xxxBA registers */ +#define SMBHSTCFG 0x0E0 +#define SMBSLVC 0x0E1 +#define SMBCLK 0x0E2 +#define SMBREV 0x008 + +/* Other settings */ +#define MAX_TIMEOUT 200 /* times 1/100 sec */ +#define ALI15X3_SMB_IOSIZE 32 + +/* this is what the Award 1004 BIOS sets them to on a ASUS P5A MB. + We don't use these here. If the bases aren't set to some value we + tell user to upgrade BIOS and we fail. +*/ +#define ALI15X3_SMB_DEFAULTBASE 0xE800 + +/* ALI15X3 address lock bits */ +#define ALI15X3_LOCK 0x06 + +/* ALI15X3 command constants */ +#define ALI15X3_ABORT 0x02 +#define ALI15X3_T_OUT 0x04 +#define ALI15X3_QUICK 0x00 +#define ALI15X3_BYTE 0x10 +#define ALI15X3_BYTE_DATA 0x20 +#define ALI15X3_WORD_DATA 0x30 +#define ALI15X3_BLOCK_DATA 0x40 +#define ALI15X3_BLOCK_CLR 0x80 + +/* ALI15X3 status register bits */ +#define ALI15X3_STS_IDLE 0x04 +#define ALI15X3_STS_BUSY 0x08 +#define ALI15X3_STS_DONE 0x10 +#define ALI15X3_STS_DEV 0x20 /* device error */ +#define ALI15X3_STS_COLL 0x40 /* collision or no response */ +#define ALI15X3_STS_TERM 0x80 /* terminated by abort */ +#define ALI15X3_STS_ERR 0xE0 /* all the bad error bits */ + + +/* If force_addr is set to anything different from 0, we forcibly enable + the device at the given address. */ +static u16 force_addr = 0; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Initialize the base address of the i2c controller"); + +static unsigned short ali15x3_smba = 0; + +static int ali15x3_setup(struct pci_dev *ALI15X3_dev) +{ + u16 a; + unsigned char temp; + + /* Check the following things: + - SMB I/O address is initialized + - Device is enabled + - We can use the addresses + */ + + /* Unlock the register. + The data sheet says that the address registers are read-only + if the lock bits are 1, but in fact the address registers + are zero unless you clear the lock bits. + */ + pci_read_config_byte(ALI15X3_dev, SMBATPC, &temp); + if (temp & ALI15X3_LOCK) { + temp &= ~ALI15X3_LOCK; + pci_write_config_byte(ALI15X3_dev, SMBATPC, temp); + } + + /* Determine the address of the SMBus area */ + pci_read_config_word(ALI15X3_dev, SMBBA, &ali15x3_smba); + ali15x3_smba &= (0xffff & ~(ALI15X3_SMB_IOSIZE - 1)); + if (ali15x3_smba == 0 && force_addr == 0) { + dev_err(&ALI15X3_dev->dev, "ALI15X3_smb region uninitialized " + "- upgrade BIOS or use force_addr=0xaddr\n"); + return -ENODEV; + } + + if(force_addr) + ali15x3_smba = force_addr & ~(ALI15X3_SMB_IOSIZE - 1); + + if (!request_region(ali15x3_smba, ALI15X3_SMB_IOSIZE, "ali15x3-smb")) { + dev_err(&ALI15X3_dev->dev, + "ALI15X3_smb region 0x%x already in use!\n", + ali15x3_smba); + return -ENODEV; + } + + if(force_addr) { + dev_info(&ALI15X3_dev->dev, "forcing ISA address 0x%04X\n", + ali15x3_smba); + if (PCIBIOS_SUCCESSFUL != pci_write_config_word(ALI15X3_dev, + SMBBA, + ali15x3_smba)) + goto error; + if (PCIBIOS_SUCCESSFUL != pci_read_config_word(ALI15X3_dev, + SMBBA, &a)) + goto error; + if ((a & ~(ALI15X3_SMB_IOSIZE - 1)) != ali15x3_smba) { + /* make sure it works */ + dev_err(&ALI15X3_dev->dev, + "force address failed - not supported?\n"); + goto error; + } + } + /* check if whole device is enabled */ + pci_read_config_byte(ALI15X3_dev, SMBCOM, &temp); + if ((temp & 1) == 0) { + dev_info(&ALI15X3_dev->dev, "enabling SMBus device\n"); + pci_write_config_byte(ALI15X3_dev, SMBCOM, temp | 0x01); + } + + /* Is SMB Host controller enabled? */ + pci_read_config_byte(ALI15X3_dev, SMBHSTCFG, &temp); + if ((temp & 1) == 0) { + dev_info(&ALI15X3_dev->dev, "enabling SMBus controller\n"); + pci_write_config_byte(ALI15X3_dev, SMBHSTCFG, temp | 0x01); + } + + /* set SMB clock to 74KHz as recommended in data sheet */ + pci_write_config_byte(ALI15X3_dev, SMBCLK, 0x20); + + /* + The interrupt routing for SMB is set up in register 0x77 in the + 1533 ISA Bridge device, NOT in the 7101 device. + Don't bother with finding the 1533 device and reading the register. + if ((....... & 0x0F) == 1) + dev_dbg(&ALI15X3_dev->dev, "ALI15X3 using Interrupt 9 for SMBus.\n"); + */ + pci_read_config_byte(ALI15X3_dev, SMBREV, &temp); + dev_dbg(&ALI15X3_dev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&ALI15X3_dev->dev, "iALI15X3_smba = 0x%X\n", ali15x3_smba); + + return 0; +error: + release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE); + return -ENODEV; +} + +/* Another internally used function */ +static int ali15x3_transaction(struct i2c_adapter *adap) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&adap->dev, "Transaction (pre): STS=%02x, CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTSTS), + inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), + inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); + + /* get status */ + temp = inb_p(SMBHSTSTS); + + /* Make sure the SMBus host is ready to start transmitting */ + /* Check the busy bit first */ + if (temp & ALI15X3_STS_BUSY) { + /* + If the host controller is still busy, it may have timed out in the + previous transaction, resulting in a "SMBus Timeout" Dev. + I've tried the following to reset a stuck busy bit. + 1. Reset the controller with an ABORT command. + (this doesn't seem to clear the controller if an external + device is hung) + 2. Reset the controller and the other SMBus devices with a + T_OUT command. (this clears the host busy bit if an + external device is hung, but it comes back upon a new access + to a device) + 3. Disable and reenable the controller in SMBHSTCFG + Worst case, nothing seems to work except power reset. + */ + /* Abort - reset the host controller */ + /* + Try resetting entire SMB bus, including other devices - + This may not work either - it clears the BUSY bit but + then the BUSY bit may come back on when you try and use the chip again. + If that's the case you are stuck. + */ + dev_info(&adap->dev, "Resetting entire SMB Bus to " + "clear busy condition (%02x)\n", temp); + outb_p(ALI15X3_T_OUT, SMBHSTCNT); + temp = inb_p(SMBHSTSTS); + } + + /* now check the error bits and the busy bit */ + if (temp & (ALI15X3_STS_ERR | ALI15X3_STS_BUSY)) { + /* do a clear-on-write */ + outb_p(0xFF, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) & + (ALI15X3_STS_ERR | ALI15X3_STS_BUSY)) { + /* this is probably going to be correctable only by a power reset + as one of the bits now appears to be stuck */ + /* This may be a bus or device with electrical problems. */ + dev_err(&adap->dev, "SMBus reset failed! (0x%02x) - " + "controller or device on bus is probably hung\n", + temp); + return -1; + } + } else { + /* check and clear done bit */ + if (temp & ALI15X3_STS_DONE) { + outb_p(temp, SMBHSTSTS); + } + } + + /* start the transaction by writing anything to the start register */ + outb_p(0xFF, SMBHSTSTART); + + /* We will always wait for a fraction of a second! */ + timeout = 0; + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((!(temp & (ALI15X3_STS_ERR | ALI15X3_STS_DONE))) + && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + result = -1; + dev_err(&adap->dev, "SMBus Timeout!\n"); + } + + if (temp & ALI15X3_STS_TERM) { + result = -1; + dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); + } + + /* + Unfortunately the ALI SMB controller maps "no response" and "bus + collision" into a single bit. No reponse is the usual case so don't + do a printk. + This means that bus collisions go unreported. + */ + if (temp & ALI15X3_STS_COLL) { + result = -1; + dev_dbg(&adap->dev, + "Error: no response or bus collision ADD=%02x\n", + inb_p(SMBHSTADD)); + } + + /* haven't ever seen this */ + if (temp & ALI15X3_STS_DEV) { + result = -1; + dev_err(&adap->dev, "Error: device error\n"); + } + dev_dbg(&adap->dev, "Transaction (post): STS=%02x, CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTSTS), + inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), + inb_p(SMBHSTDAT0), inb_p(SMBHSTDAT1)); + return result; +} + +/* Return -1 on error. */ +static s32 ali15x3_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data * data) +{ + int i, len; + int temp; + int timeout; + + /* clear all the bits (clear-on-write) */ + outb_p(0xFF, SMBHSTSTS); + /* make sure SMBus is idle */ + temp = inb_p(SMBHSTSTS); + for (timeout = 0; + (timeout < MAX_TIMEOUT) && !(temp & ALI15X3_STS_IDLE); + timeout++) { + msleep(1); + temp = inb_p(SMBHSTSTS); + } + if (timeout >= MAX_TIMEOUT) { + dev_err(&adap->dev, "Idle wait Timeout! STS=0x%02x\n", temp); + } + + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + return -1; + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = ALI15X3_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + size = ALI15X3_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + size = ALI15X3_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = ALI15X3_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) { + len = 0; + data->block[0] = len; + } + if (len > 32) { + len = 32; + data->block[0] = len; + } + outb_p(len, SMBHSTDAT0); + /* Reset SMBBLKDAT */ + outb_p(inb_p(SMBHSTCNT) | ALI15X3_BLOCK_CLR, SMBHSTCNT); + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + size = ALI15X3_BLOCK_DATA; + break; + } + + outb_p(size, SMBHSTCNT); /* output command */ + + if (ali15x3_transaction(adap)) /* Error in transaction */ + return -1; + + if ((read_write == I2C_SMBUS_WRITE) || (size == ALI15X3_QUICK)) + return 0; + + + switch (size) { + case ALI15X3_BYTE: /* Result put in SMBHSTDAT0 */ + data->byte = inb_p(SMBHSTDAT0); + break; + case ALI15X3_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case ALI15X3_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case ALI15X3_BLOCK_DATA: + len = inb_p(SMBHSTDAT0); + if (len > 32) + len = 32; + data->block[0] = len; + /* Reset SMBBLKDAT */ + outb_p(inb_p(SMBHSTCNT) | ALI15X3_BLOCK_CLR, SMBHSTCNT); + for (i = 1; i <= data->block[0]; i++) { + data->block[i] = inb_p(SMBBLKDAT); + dev_dbg(&adap->dev, "Blk: len=%d, i=%d, data=%02x\n", + len, i, data->block[i]); + } + break; + } + return 0; +} + +static u32 ali15x3_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = ali15x3_access, + .functionality = ali15x3_func, +}; + +static struct i2c_adapter ali15x3_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static struct pci_device_id ali15x3_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, ali15x3_ids); + +static int __devinit ali15x3_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + if (ali15x3_setup(dev)) { + dev_err(&dev->dev, + "ALI15X3 not detected, module not inserted.\n"); + return -ENODEV; + } + + /* set up the driverfs linkage to our parent device */ + ali15x3_adapter.dev.parent = &dev->dev; + + snprintf(ali15x3_adapter.name, I2C_NAME_SIZE, + "SMBus ALI15X3 adapter at %04x", ali15x3_smba); + return i2c_add_adapter(&ali15x3_adapter); +} + +static void __devexit ali15x3_remove(struct pci_dev *dev) +{ + i2c_del_adapter(&ali15x3_adapter); + release_region(ali15x3_smba, ALI15X3_SMB_IOSIZE); +} + +static struct pci_driver ali15x3_driver = { + .name = "ali15x3_smbus", + .id_table = ali15x3_ids, + .probe = ali15x3_probe, + .remove = __devexit_p(ali15x3_remove), +}; + +static int __init i2c_ali15x3_init(void) +{ + return pci_register_driver(&ali15x3_driver); +} + +static void __exit i2c_ali15x3_exit(void) +{ + pci_unregister_driver(&ali15x3_driver); +} + +MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("ALI15X3 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_ali15x3_init); +module_exit(i2c_ali15x3_exit); diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c new file mode 100644 index 00000000000..4e553e8c5cb --- /dev/null +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -0,0 +1,264 @@ +/* + * i2c-amd756-s4882.c - i2c-amd756 extras for the Tyan S4882 motherboard + * + * Copyright (C) 2004 Jean Delvare <khali@linux-fr.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * We select the channels by sending commands to the Philips + * PCA9556 chip at I2C address 0x18. The main adapter is used for + * the non-multiplexed part of the bus, and 4 virtual adapters + * are defined for the multiplexed addresses: 0x50-0x53 (memory + * module EEPROM) located on channels 1-4, and 0x4c (LM63) + * located on multiplexed channels 0 and 5-7. We define one + * virtual adapter per CPU, which corresponds to two multiplexed + * channels: + * CPU0: virtual adapter 1, channels 1 and 0 + * CPU1: virtual adapter 2, channels 2 and 5 + * CPU2: virtual adapter 3, channels 3 and 6 + * CPU3: virtual adapter 4, channels 4 and 7 + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/i2c.h> + +extern struct i2c_adapter amd756_smbus; + +static struct i2c_adapter *s4882_adapter; +static struct i2c_algorithm *s4882_algo; + +/* Wrapper access functions for multiplexed SMBus */ +static struct semaphore amd756_lock; + +static s32 amd756_access_virt0(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data * data) +{ + int error; + + /* We exclude the multiplexed addresses */ + if (addr == 0x4c || (addr & 0xfc) == 0x50 || (addr & 0xfc) == 0x30 + || addr == 0x18) + return -1; + + down(&amd756_lock); + + error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write, + command, size, data); + + up(&amd756_lock); + + return error; +} + +/* We remember the last used channels combination so as to only switch + channels when it is really needed. This greatly reduces the SMBus + overhead, but also assumes that nobody will be writing to the PCA9556 + in our back. */ +static u8 last_channels; + +static inline s32 amd756_access_channel(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data * data, + u8 channels) +{ + int error; + + /* We exclude the non-multiplexed addresses */ + if (addr != 0x4c && (addr & 0xfc) != 0x50 && (addr & 0xfc) != 0x30) + return -1; + + down(&amd756_lock); + + if (last_channels != channels) { + union i2c_smbus_data mplxdata; + mplxdata.byte = channels; + + error = amd756_smbus.algo->smbus_xfer(adap, 0x18, 0, + I2C_SMBUS_WRITE, 0x01, + I2C_SMBUS_BYTE_DATA, + &mplxdata); + if (error) + goto UNLOCK; + last_channels = channels; + } + error = amd756_smbus.algo->smbus_xfer(adap, addr, flags, read_write, + command, size, data); + +UNLOCK: + up(&amd756_lock); + return error; +} + +static s32 amd756_access_virt1(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data * data) +{ + /* CPU0: channels 1 and 0 enabled */ + return amd756_access_channel(adap, addr, flags, read_write, command, + size, data, 0x03); +} + +static s32 amd756_access_virt2(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data * data) +{ + /* CPU1: channels 2 and 5 enabled */ + return amd756_access_channel(adap, addr, flags, read_write, command, + size, data, 0x24); +} + +static s32 amd756_access_virt3(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data * data) +{ + /* CPU2: channels 3 and 6 enabled */ + return amd756_access_channel(adap, addr, flags, read_write, command, + size, data, 0x48); +} + +static s32 amd756_access_virt4(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, + union i2c_smbus_data * data) +{ + /* CPU3: channels 4 and 7 enabled */ + return amd756_access_channel(adap, addr, flags, read_write, command, + size, data, 0x90); +} + +static int __init amd756_s4882_init(void) +{ + int i, error; + union i2c_smbus_data ioconfig; + + /* Unregister physical bus */ + error = i2c_del_adapter(&amd756_smbus); + if (error) { + if (error == -EINVAL) + error = -ENODEV; + else + dev_err(&amd756_smbus.dev, "Physical bus removal " + "failed\n"); + goto ERROR0; + } + + printk(KERN_INFO "Enabling SMBus multiplexing for Tyan S4882\n"); + init_MUTEX(&amd756_lock); + + /* Define the 5 virtual adapters and algorithms structures */ + if (!(s4882_adapter = kmalloc(5 * sizeof(struct i2c_adapter), + GFP_KERNEL))) { + error = -ENOMEM; + goto ERROR1; + } + if (!(s4882_algo = kmalloc(5 * sizeof(struct i2c_algorithm), + GFP_KERNEL))) { + error = -ENOMEM; + goto ERROR2; + } + + /* Fill in the new structures */ + s4882_algo[0] = *(amd756_smbus.algo); + s4882_algo[0].smbus_xfer = amd756_access_virt0; + s4882_adapter[0] = amd756_smbus; + s4882_adapter[0].algo = s4882_algo; + for (i = 1; i < 5; i++) { + s4882_algo[i] = *(amd756_smbus.algo); + s4882_adapter[i] = amd756_smbus; + sprintf(s4882_adapter[i].name, + "SMBus 8111 adapter (CPU%d)", i-1); + s4882_adapter[i].algo = s4882_algo+i; + } + s4882_algo[1].smbus_xfer = amd756_access_virt1; + s4882_algo[2].smbus_xfer = amd756_access_virt2; + s4882_algo[3].smbus_xfer = amd756_access_virt3; + s4882_algo[4].smbus_xfer = amd756_access_virt4; + + /* Configure the PCA9556 multiplexer */ + ioconfig.byte = 0x00; /* All I/O to output mode */ + error = amd756_smbus.algo->smbus_xfer(&amd756_smbus, 0x18, 0, + I2C_SMBUS_WRITE, 0x03, + I2C_SMBUS_BYTE_DATA, &ioconfig); + if (error) { + dev_err(&amd756_smbus.dev, "PCA9556 configuration failed\n"); + error = -EIO; + goto ERROR3; + } + + /* Register virtual adapters */ + for (i = 0; i < 5; i++) { + error = i2c_add_adapter(s4882_adapter+i); + if (error) { + dev_err(&amd756_smbus.dev, + "Virtual adapter %d registration " + "failed, module not inserted\n", i); + for (i--; i >= 0; i--) + i2c_del_adapter(s4882_adapter+i); + goto ERROR3; + } + } + + return 0; + +ERROR3: + kfree(s4882_algo); + s4882_algo = NULL; +ERROR2: + kfree(s4882_adapter); + s4882_adapter = NULL; +ERROR1: + i2c_del_adapter(&amd756_smbus); +ERROR0: + return error; +} + +static void __exit amd756_s4882_exit(void) +{ + if (s4882_adapter) { + int i; + + for (i = 0; i < 5; i++) + i2c_del_adapter(s4882_adapter+i); + kfree(s4882_adapter); + s4882_adapter = NULL; + } + if (s4882_algo) { + kfree(s4882_algo); + s4882_algo = NULL; + } + + /* Restore physical bus */ + if (i2c_add_adapter(&amd756_smbus)) + dev_err(&amd756_smbus.dev, "Physical bus restoration " + "failed\n"); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("S4882 SMBus multiplexing"); +MODULE_LICENSE("GPL"); + +module_init(amd756_s4882_init); +module_exit(amd756_s4882_exit); diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c new file mode 100644 index 00000000000..eca5ed3738b --- /dev/null +++ b/drivers/i2c/busses/i2c-amd756.c @@ -0,0 +1,431 @@ +/* + amd756.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (c) 1999-2002 Merlin Hughes <merlin@merlin.org> + + Shamelessly ripped from i2c-piix4.c: + + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + 2002-04-08: Added nForce support. (Csaba Halasz) + 2002-10-03: Fixed nForce PnP I/O port. (Michael Steil) + 2002-12-28: Rewritten into something that resembles a Linux driver (hch) + 2003-11-29: Added back AMD8111 removed by the previous rewrite. + (Philip Pokorny) +*/ + +/* + Supports AMD756, AMD766, AMD768, AMD8111 and nVidia nForce + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <asm/io.h> + +/* AMD756 SMBus address offsets */ +#define SMB_ADDR_OFFSET 0xE0 +#define SMB_IOSIZE 16 +#define SMB_GLOBAL_STATUS (0x0 + amd756_ioport) +#define SMB_GLOBAL_ENABLE (0x2 + amd756_ioport) +#define SMB_HOST_ADDRESS (0x4 + amd756_ioport) +#define SMB_HOST_DATA (0x6 + amd756_ioport) +#define SMB_HOST_COMMAND (0x8 + amd756_ioport) +#define SMB_HOST_BLOCK_DATA (0x9 + amd756_ioport) +#define SMB_HAS_DATA (0xA + amd756_ioport) +#define SMB_HAS_DEVICE_ADDRESS (0xC + amd756_ioport) +#define SMB_HAS_HOST_ADDRESS (0xE + amd756_ioport) +#define SMB_SNOOP_ADDRESS (0xF + amd756_ioport) + +/* PCI Address Constants */ + +/* address of I/O space */ +#define SMBBA 0x058 /* mh */ +#define SMBBANFORCE 0x014 + +/* general configuration */ +#define SMBGCFG 0x041 /* mh */ + +/* silicon revision code */ +#define SMBREV 0x008 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* AMD756 constants */ +#define AMD756_QUICK 0x00 +#define AMD756_BYTE 0x01 +#define AMD756_BYTE_DATA 0x02 +#define AMD756_WORD_DATA 0x03 +#define AMD756_PROCESS_CALL 0x04 +#define AMD756_BLOCK_DATA 0x05 + + +static unsigned short amd756_ioport = 0; + +/* + SMBUS event = I/O 28-29 bit 11 + see E0 for the status bits and enabled in E2 + +*/ +#define GS_ABRT_STS (1 << 0) +#define GS_COL_STS (1 << 1) +#define GS_PRERR_STS (1 << 2) +#define GS_HST_STS (1 << 3) +#define GS_HCYC_STS (1 << 4) +#define GS_TO_STS (1 << 5) +#define GS_SMB_STS (1 << 11) + +#define GS_CLEAR_STS (GS_ABRT_STS | GS_COL_STS | GS_PRERR_STS | \ + GS_HCYC_STS | GS_TO_STS ) + +#define GE_CYC_TYPE_MASK (7) +#define GE_HOST_STC (1 << 3) +#define GE_ABORT (1 << 5) + + +static int amd756_transaction(struct i2c_adapter *adap) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&adap->dev, "Transaction (pre): GS=%04x, GE=%04x, ADD=%04x, " + "DAT=%04x\n", inw_p(SMB_GLOBAL_STATUS), + inw_p(SMB_GLOBAL_ENABLE), inw_p(SMB_HOST_ADDRESS), + inb_p(SMB_HOST_DATA)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inw_p(SMB_GLOBAL_STATUS)) & (GS_HST_STS | GS_SMB_STS)) { + dev_dbg(&adap->dev, "SMBus busy (%04x). Waiting...\n", temp); + do { + msleep(1); + temp = inw_p(SMB_GLOBAL_STATUS); + } while ((temp & (GS_HST_STS | GS_SMB_STS)) && + (timeout++ < MAX_TIMEOUT)); + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); + goto abort; + } + timeout = 0; + } + + /* start the transaction by setting the start bit */ + outw_p(inw(SMB_GLOBAL_ENABLE) | GE_HOST_STC, SMB_GLOBAL_ENABLE); + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = inw_p(SMB_GLOBAL_STATUS); + } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&adap->dev, "Completion timeout!\n"); + goto abort; + } + + if (temp & GS_PRERR_STS) { + result = -1; + dev_dbg(&adap->dev, "SMBus Protocol error (no response)!\n"); + } + + if (temp & GS_COL_STS) { + result = -1; + dev_warn(&adap->dev, "SMBus collision!\n"); + } + + if (temp & GS_TO_STS) { + result = -1; + dev_dbg(&adap->dev, "SMBus protocol timeout!\n"); + } + + if (temp & GS_HCYC_STS) + dev_dbg(&adap->dev, "SMBus protocol success!\n"); + + outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); + +#ifdef DEBUG + if (((temp = inw_p(SMB_GLOBAL_STATUS)) & GS_CLEAR_STS) != 0x00) { + dev_dbg(&adap->dev, + "Failed reset at end of transaction (%04x)\n", temp); + } +#endif + + dev_dbg(&adap->dev, + "Transaction (post): GS=%04x, GE=%04x, ADD=%04x, DAT=%04x\n", + inw_p(SMB_GLOBAL_STATUS), inw_p(SMB_GLOBAL_ENABLE), + inw_p(SMB_HOST_ADDRESS), inb_p(SMB_HOST_DATA)); + + return result; + + abort: + dev_warn(&adap->dev, "Sending abort\n"); + outw_p(inw(SMB_GLOBAL_ENABLE) | GE_ABORT, SMB_GLOBAL_ENABLE); + msleep(100); + outw_p(GS_CLEAR_STS, SMB_GLOBAL_STATUS); + return -1; +} + +/* Return -1 on error. */ +static s32 amd756_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + int i, len; + + /** TODO: Should I supporte the 10-bit transfers? */ + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_dbg(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + /* TODO: Well... It is supported, I'm just not sure what to do here... */ + return -1; + case I2C_SMBUS_QUICK: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + size = AMD756_QUICK; + break; + case I2C_SMBUS_BYTE: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMB_HOST_DATA); + size = AMD756_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + outb_p(command, SMB_HOST_COMMAND); + if (read_write == I2C_SMBUS_WRITE) + outw_p(data->byte, SMB_HOST_DATA); + size = AMD756_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + outb_p(command, SMB_HOST_COMMAND); + if (read_write == I2C_SMBUS_WRITE) + outw_p(data->word, SMB_HOST_DATA); /* TODO: endian???? */ + size = AMD756_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outw_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMB_HOST_ADDRESS); + outb_p(command, SMB_HOST_COMMAND); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + if (len > 32) + len = 32; + outw_p(len, SMB_HOST_DATA); + /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], + SMB_HOST_BLOCK_DATA); + } + size = AMD756_BLOCK_DATA; + break; + } + + /* How about enabling interrupts... */ + outw_p(size & GE_CYC_TYPE_MASK, SMB_GLOBAL_ENABLE); + + if (amd756_transaction(adap)) /* Error in transaction */ + return -1; + + if ((read_write == I2C_SMBUS_WRITE) || (size == AMD756_QUICK)) + return 0; + + + switch (size) { + case AMD756_BYTE: + data->byte = inw_p(SMB_HOST_DATA); + break; + case AMD756_BYTE_DATA: + data->byte = inw_p(SMB_HOST_DATA); + break; + case AMD756_WORD_DATA: + data->word = inw_p(SMB_HOST_DATA); /* TODO: endian???? */ + break; + case AMD756_BLOCK_DATA: + data->block[0] = inw_p(SMB_HOST_DATA) & 0x3f; + if(data->block[0] > 32) + data->block[0] = 32; + /* i = inw_p(SMBHSTCNT); Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMB_HOST_BLOCK_DATA); + break; + } + + return 0; +} + +static u32 amd756_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_PROC_CALL; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = amd756_access, + .functionality = amd756_func, +}; + +struct i2c_adapter amd756_smbus = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +enum chiptype { AMD756, AMD766, AMD768, NFORCE, AMD8111 }; +static const char* chipname[] = { + "AMD756", "AMD766", "AMD768", + "nVidia nForce", "AMD8111", +}; + +static struct pci_device_id amd756_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_740B), + .driver_data = AMD756 }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7413), + .driver_data = AMD766 }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_OPUS_7443), + .driver_data = AMD768 }, + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS), + .driver_data = AMD8111 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS), + .driver_data = NFORCE }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, amd756_ids); + +static int __devinit amd756_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + int nforce = (id->driver_data == NFORCE); + int error; + u8 temp; + + if (amd756_ioport) { + dev_err(&pdev->dev, "Only one device supported " + "(you have a strange motherboard, btw)\n"); + return -ENODEV; + } + + if (nforce) { + if (PCI_FUNC(pdev->devfn) != 1) + return -ENODEV; + + pci_read_config_word(pdev, SMBBANFORCE, &amd756_ioport); + amd756_ioport &= 0xfffc; + } else { /* amd */ + if (PCI_FUNC(pdev->devfn) != 3) + return -ENODEV; + + pci_read_config_byte(pdev, SMBGCFG, &temp); + if ((temp & 128) == 0) { + dev_err(&pdev->dev, + "Error: SMBus controller I/O not enabled!\n"); + return -ENODEV; + } + + /* Determine the address of the SMBus areas */ + /* Technically it is a dword but... */ + pci_read_config_word(pdev, SMBBA, &amd756_ioport); + amd756_ioport &= 0xff00; + amd756_ioport += SMB_ADDR_OFFSET; + } + + if (!request_region(amd756_ioport, SMB_IOSIZE, "amd756-smbus")) { + dev_err(&pdev->dev, "SMB region 0x%x already in use!\n", + amd756_ioport); + return -ENODEV; + } + + pci_read_config_byte(pdev, SMBREV, &temp); + dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&pdev->dev, "AMD756_smba = 0x%X\n", amd756_ioport); + + /* set up the driverfs linkage to our parent device */ + amd756_smbus.dev.parent = &pdev->dev; + + sprintf(amd756_smbus.name, "SMBus %s adapter at %04x", + chipname[id->driver_data], amd756_ioport); + + error = i2c_add_adapter(&amd756_smbus); + if (error) { + dev_err(&pdev->dev, + "Adapter registration failed, module not inserted\n"); + goto out_err; + } + + return 0; + + out_err: + release_region(amd756_ioport, SMB_IOSIZE); + return error; +} + +static void __devexit amd756_remove(struct pci_dev *dev) +{ + i2c_del_adapter(&amd756_smbus); + release_region(amd756_ioport, SMB_IOSIZE); +} + +static struct pci_driver amd756_driver = { + .name = "amd756_smbus", + .id_table = amd756_ids, + .probe = amd756_probe, + .remove = __devexit_p(amd756_remove), +}; + +static int __init amd756_init(void) +{ + return pci_register_driver(&amd756_driver); +} + +static void __exit amd756_exit(void) +{ + pci_unregister_driver(&amd756_driver); +} + +MODULE_AUTHOR("Merlin Hughes <merlin@merlin.org>"); +MODULE_DESCRIPTION("AMD756/766/768/8111 and nVidia nForce SMBus driver"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(amd756_smbus); + +module_init(amd756_init) +module_exit(amd756_exit) diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c new file mode 100644 index 00000000000..af22b401a38 --- /dev/null +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -0,0 +1,415 @@ +/* + * SMBus 2.0 driver for AMD-8111 IO-Hub. + * + * Copyright (c) 2002 Vojtech Pavlik + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation version 2. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/io.h> + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Vojtech Pavlik <vojtech@suse.cz>"); +MODULE_DESCRIPTION("AMD8111 SMBus 2.0 driver"); + +struct amd_smbus { + struct pci_dev *dev; + struct i2c_adapter adapter; + int base; + int size; +}; + +/* + * AMD PCI control registers definitions. + */ + +#define AMD_PCI_MISC 0x48 + +#define AMD_PCI_MISC_SCI 0x04 /* deliver SCI */ +#define AMD_PCI_MISC_INT 0x02 /* deliver PCI IRQ */ +#define AMD_PCI_MISC_SPEEDUP 0x01 /* 16x clock speedup */ + +/* + * ACPI 2.0 chapter 13 PCI interface definitions. + */ + +#define AMD_EC_DATA 0x00 /* data register */ +#define AMD_EC_SC 0x04 /* status of controller */ +#define AMD_EC_CMD 0x04 /* command register */ +#define AMD_EC_ICR 0x08 /* interrupt control register */ + +#define AMD_EC_SC_SMI 0x04 /* smi event pending */ +#define AMD_EC_SC_SCI 0x02 /* sci event pending */ +#define AMD_EC_SC_BURST 0x01 /* burst mode enabled */ +#define AMD_EC_SC_CMD 0x08 /* byte in data reg is command */ +#define AMD_EC_SC_IBF 0x02 /* data ready for embedded controller */ +#define AMD_EC_SC_OBF 0x01 /* data ready for host */ + +#define AMD_EC_CMD_RD 0x80 /* read EC */ +#define AMD_EC_CMD_WR 0x81 /* write EC */ +#define AMD_EC_CMD_BE 0x82 /* enable burst mode */ +#define AMD_EC_CMD_BD 0x83 /* disable burst mode */ +#define AMD_EC_CMD_QR 0x84 /* query EC */ + +/* + * ACPI 2.0 chapter 13 access of registers of the EC + */ + +static unsigned int amd_ec_wait_write(struct amd_smbus *smbus) +{ + int timeout = 500; + + while (timeout-- && (inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_IBF)) + udelay(1); + + if (!timeout) { + dev_warn(&smbus->dev->dev, "Timeout while waiting for IBF to clear\n"); + return -1; + } + + return 0; +} + +static unsigned int amd_ec_wait_read(struct amd_smbus *smbus) +{ + int timeout = 500; + + while (timeout-- && (~inb(smbus->base + AMD_EC_SC) & AMD_EC_SC_OBF)) + udelay(1); + + if (!timeout) { + dev_warn(&smbus->dev->dev, "Timeout while waiting for OBF to set\n"); + return -1; + } + + return 0; +} + +static unsigned int amd_ec_read(struct amd_smbus *smbus, unsigned char address, unsigned char *data) +{ + if (amd_ec_wait_write(smbus)) + return -1; + outb(AMD_EC_CMD_RD, smbus->base + AMD_EC_CMD); + + if (amd_ec_wait_write(smbus)) + return -1; + outb(address, smbus->base + AMD_EC_DATA); + + if (amd_ec_wait_read(smbus)) + return -1; + *data = inb(smbus->base + AMD_EC_DATA); + + return 0; +} + +static unsigned int amd_ec_write(struct amd_smbus *smbus, unsigned char address, unsigned char data) +{ + if (amd_ec_wait_write(smbus)) + return -1; + outb(AMD_EC_CMD_WR, smbus->base + AMD_EC_CMD); + + if (amd_ec_wait_write(smbus)) + return -1; + outb(address, smbus->base + AMD_EC_DATA); + + if (amd_ec_wait_write(smbus)) + return -1; + outb(data, smbus->base + AMD_EC_DATA); + + return 0; +} + +/* + * ACPI 2.0 chapter 13 SMBus 2.0 EC register model + */ + +#define AMD_SMB_PRTCL 0x00 /* protocol, PEC */ +#define AMD_SMB_STS 0x01 /* status */ +#define AMD_SMB_ADDR 0x02 /* address */ +#define AMD_SMB_CMD 0x03 /* command */ +#define AMD_SMB_DATA 0x04 /* 32 data registers */ +#define AMD_SMB_BCNT 0x24 /* number of data bytes */ +#define AMD_SMB_ALRM_A 0x25 /* alarm address */ +#define AMD_SMB_ALRM_D 0x26 /* 2 bytes alarm data */ + +#define AMD_SMB_STS_DONE 0x80 +#define AMD_SMB_STS_ALRM 0x40 +#define AMD_SMB_STS_RES 0x20 +#define AMD_SMB_STS_STATUS 0x1f + +#define AMD_SMB_STATUS_OK 0x00 +#define AMD_SMB_STATUS_FAIL 0x07 +#define AMD_SMB_STATUS_DNAK 0x10 +#define AMD_SMB_STATUS_DERR 0x11 +#define AMD_SMB_STATUS_CMD_DENY 0x12 +#define AMD_SMB_STATUS_UNKNOWN 0x13 +#define AMD_SMB_STATUS_ACC_DENY 0x17 +#define AMD_SMB_STATUS_TIMEOUT 0x18 +#define AMD_SMB_STATUS_NOTSUP 0x19 +#define AMD_SMB_STATUS_BUSY 0x1A +#define AMD_SMB_STATUS_PEC 0x1F + +#define AMD_SMB_PRTCL_WRITE 0x00 +#define AMD_SMB_PRTCL_READ 0x01 +#define AMD_SMB_PRTCL_QUICK 0x02 +#define AMD_SMB_PRTCL_BYTE 0x04 +#define AMD_SMB_PRTCL_BYTE_DATA 0x06 +#define AMD_SMB_PRTCL_WORD_DATA 0x08 +#define AMD_SMB_PRTCL_BLOCK_DATA 0x0a +#define AMD_SMB_PRTCL_PROC_CALL 0x0c +#define AMD_SMB_PRTCL_BLOCK_PROC_CALL 0x0d +#define AMD_SMB_PRTCL_I2C_BLOCK_DATA 0x4a +#define AMD_SMB_PRTCL_PEC 0x80 + + +static s32 amd8111_access(struct i2c_adapter * adap, u16 addr, unsigned short flags, + char read_write, u8 command, int size, union i2c_smbus_data * data) +{ + struct amd_smbus *smbus = adap->algo_data; + unsigned char protocol, len, pec, temp[2]; + int i; + + protocol = (read_write == I2C_SMBUS_READ) ? AMD_SMB_PRTCL_READ : AMD_SMB_PRTCL_WRITE; + pec = (flags & I2C_CLIENT_PEC) ? AMD_SMB_PRTCL_PEC : 0; + + switch (size) { + + case I2C_SMBUS_QUICK: + protocol |= AMD_SMB_PRTCL_QUICK; + read_write = I2C_SMBUS_WRITE; + break; + + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_WRITE) + amd_ec_write(smbus, AMD_SMB_CMD, command); + protocol |= AMD_SMB_PRTCL_BYTE; + break; + + case I2C_SMBUS_BYTE_DATA: + amd_ec_write(smbus, AMD_SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) + amd_ec_write(smbus, AMD_SMB_DATA, data->byte); + protocol |= AMD_SMB_PRTCL_BYTE_DATA; + break; + + case I2C_SMBUS_WORD_DATA: + amd_ec_write(smbus, AMD_SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + amd_ec_write(smbus, AMD_SMB_DATA, data->word); + amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); + } + protocol |= AMD_SMB_PRTCL_WORD_DATA | pec; + break; + + case I2C_SMBUS_BLOCK_DATA: + amd_ec_write(smbus, AMD_SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + len = min_t(u8, data->block[0], 32); + amd_ec_write(smbus, AMD_SMB_BCNT, len); + for (i = 0; i < len; i++) + amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + } + protocol |= AMD_SMB_PRTCL_BLOCK_DATA | pec; + break; + + case I2C_SMBUS_I2C_BLOCK_DATA: + len = min_t(u8, data->block[0], 32); + amd_ec_write(smbus, AMD_SMB_CMD, command); + amd_ec_write(smbus, AMD_SMB_BCNT, len); + if (read_write == I2C_SMBUS_WRITE) + for (i = 0; i < len; i++) + amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + protocol |= AMD_SMB_PRTCL_I2C_BLOCK_DATA; + break; + + case I2C_SMBUS_PROC_CALL: + amd_ec_write(smbus, AMD_SMB_CMD, command); + amd_ec_write(smbus, AMD_SMB_DATA, data->word); + amd_ec_write(smbus, AMD_SMB_DATA + 1, data->word >> 8); + protocol = AMD_SMB_PRTCL_PROC_CALL | pec; + read_write = I2C_SMBUS_READ; + break; + + case I2C_SMBUS_BLOCK_PROC_CALL: + protocol |= pec; + len = min_t(u8, data->block[0], 31); + amd_ec_write(smbus, AMD_SMB_CMD, command); + amd_ec_write(smbus, AMD_SMB_BCNT, len); + for (i = 0; i < len; i++) + amd_ec_write(smbus, AMD_SMB_DATA + i, data->block[i + 1]); + protocol = AMD_SMB_PRTCL_BLOCK_PROC_CALL | pec; + read_write = I2C_SMBUS_READ; + break; + + case I2C_SMBUS_WORD_DATA_PEC: + case I2C_SMBUS_BLOCK_DATA_PEC: + case I2C_SMBUS_PROC_CALL_PEC: + case I2C_SMBUS_BLOCK_PROC_CALL_PEC: + dev_warn(&adap->dev, "Unexpected software PEC transaction %d\n.", size); + return -1; + + default: + dev_warn(&adap->dev, "Unsupported transaction %d\n", size); + return -1; + } + + amd_ec_write(smbus, AMD_SMB_ADDR, addr << 1); + amd_ec_write(smbus, AMD_SMB_PRTCL, protocol); + + amd_ec_read(smbus, AMD_SMB_STS, temp + 0); + + if (~temp[0] & AMD_SMB_STS_DONE) { + udelay(500); + amd_ec_read(smbus, AMD_SMB_STS, temp + 0); + } + + if (~temp[0] & AMD_SMB_STS_DONE) { + msleep(1); + amd_ec_read(smbus, AMD_SMB_STS, temp + 0); + } + + if ((~temp[0] & AMD_SMB_STS_DONE) || (temp[0] & AMD_SMB_STS_STATUS)) + return -1; + + if (read_write == I2C_SMBUS_WRITE) + return 0; + + switch (size) { + + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + amd_ec_read(smbus, AMD_SMB_DATA, &data->byte); + break; + + case I2C_SMBUS_WORD_DATA: + case I2C_SMBUS_PROC_CALL: + amd_ec_read(smbus, AMD_SMB_DATA, temp + 0); + amd_ec_read(smbus, AMD_SMB_DATA + 1, temp + 1); + data->word = (temp[1] << 8) | temp[0]; + break; + + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_BLOCK_PROC_CALL: + amd_ec_read(smbus, AMD_SMB_BCNT, &len); + len = min_t(u8, len, 32); + case I2C_SMBUS_I2C_BLOCK_DATA: + for (i = 0; i < len; i++) + amd_ec_read(smbus, AMD_SMB_DATA + i, data->block + i + 1); + data->block[0] = len; + break; + } + + return 0; +} + + +static u32 amd8111_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_DATA | + I2C_FUNC_SMBUS_PROC_CALL | I2C_FUNC_SMBUS_BLOCK_PROC_CALL | + I2C_FUNC_SMBUS_I2C_BLOCK | I2C_FUNC_SMBUS_HWPEC_CALC; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus 2.0 adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = amd8111_access, + .functionality = amd8111_func, +}; + + +static struct pci_device_id amd8111_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8111_SMBUS2) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, amd8111_ids); + +static int __devinit amd8111_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct amd_smbus *smbus; + int error = -ENODEV; + + if (~pci_resource_flags(dev, 0) & IORESOURCE_IO) + return -ENODEV; + + smbus = kmalloc(sizeof(struct amd_smbus), GFP_KERNEL); + if (!smbus) + return -ENOMEM; + memset(smbus, 0, sizeof(struct amd_smbus)); + + smbus->dev = dev; + smbus->base = pci_resource_start(dev, 0); + smbus->size = pci_resource_len(dev, 0); + + if (!request_region(smbus->base, smbus->size, "amd8111 SMBus 2.0")) + goto out_kfree; + + smbus->adapter.owner = THIS_MODULE; + snprintf(smbus->adapter.name, I2C_NAME_SIZE, + "SMBus2 AMD8111 adapter at %04x", smbus->base); + smbus->adapter.class = I2C_CLASS_HWMON; + smbus->adapter.algo = &smbus_algorithm; + smbus->adapter.algo_data = smbus; + + /* set up the driverfs linkage to our parent device */ + smbus->adapter.dev.parent = &dev->dev; + + error = i2c_add_adapter(&smbus->adapter); + if (error) + goto out_release_region; + + pci_write_config_dword(smbus->dev, AMD_PCI_MISC, 0); + pci_set_drvdata(dev, smbus); + return 0; + + out_release_region: + release_region(smbus->base, smbus->size); + out_kfree: + kfree(smbus); + return -1; +} + + +static void __devexit amd8111_remove(struct pci_dev *dev) +{ + struct amd_smbus *smbus = pci_get_drvdata(dev); + + i2c_del_adapter(&smbus->adapter); + release_region(smbus->base, smbus->size); + kfree(smbus); +} + +static struct pci_driver amd8111_driver = { + .name = "amd8111_smbus2", + .id_table = amd8111_ids, + .probe = amd8111_probe, + .remove = __devexit_p(amd8111_remove), +}; + +static int __init i2c_amd8111_init(void) +{ + return pci_register_driver(&amd8111_driver); +} + + +static void __exit i2c_amd8111_exit(void) +{ + pci_unregister_driver(&amd8111_driver); +} + +module_init(i2c_amd8111_init); +module_exit(i2c_amd8111_exit); diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c new file mode 100644 index 00000000000..75831a20b0b --- /dev/null +++ b/drivers/i2c/busses/i2c-au1550.c @@ -0,0 +1,435 @@ +/* + * i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface + * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com> + * + * 2.6 port by Matt Porter <mporter@kernel.crashing.org> + * + * The documentation describes this as an SMBus controller, but it doesn't + * understand any of the SMBus protocol in hardware. It's really an I2C + * controller that could emulate most of the SMBus in software. + * + * This is just a skeleton adapter to use with the Au1550 PSC + * algorithm. It was developed for the Pb1550, but will work with + * any Au1550 board that has a similar PSC configuration. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/config.h> +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/i2c.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-pb1x00/pb1550.h> +#include <asm/mach-au1x00/au1xxx_psc.h> + +#include "i2c-au1550.h" + +static int +wait_xfer_done(struct i2c_au1550_data *adap) +{ + u32 stat; + int i; + volatile psc_smb_t *sp; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + /* Wait for Tx FIFO Underflow. + */ + for (i = 0; i < adap->xfer_timeout; i++) { + stat = sp->psc_smbevnt; + au_sync(); + if ((stat & PSC_SMBEVNT_TU) != 0) { + /* Clear it. */ + sp->psc_smbevnt = PSC_SMBEVNT_TU; + au_sync(); + return 0; + } + udelay(1); + } + + return -ETIMEDOUT; +} + +static int +wait_ack(struct i2c_au1550_data *adap) +{ + u32 stat; + volatile psc_smb_t *sp; + + if (wait_xfer_done(adap)) + return -ETIMEDOUT; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + stat = sp->psc_smbevnt; + au_sync(); + + if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0) + return -ETIMEDOUT; + + return 0; +} + +static int +wait_master_done(struct i2c_au1550_data *adap) +{ + u32 stat; + int i; + volatile psc_smb_t *sp; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + /* Wait for Master Done. + */ + for (i = 0; i < adap->xfer_timeout; i++) { + stat = sp->psc_smbevnt; + au_sync(); + if ((stat & PSC_SMBEVNT_MD) != 0) + return 0; + udelay(1); + } + + return -ETIMEDOUT; +} + +static int +do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd) +{ + volatile psc_smb_t *sp; + u32 stat; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + /* Reset the FIFOs, clear events. + */ + sp->psc_smbpcr = PSC_SMBPCR_DC; + sp->psc_smbevnt = PSC_SMBEVNT_ALLCLR; + au_sync(); + do { + stat = sp->psc_smbpcr; + au_sync(); + } while ((stat & PSC_SMBPCR_DC) != 0); + + /* Write out the i2c chip address and specify operation + */ + addr <<= 1; + if (rd) + addr |= 1; + + /* Put byte into fifo, start up master. + */ + sp->psc_smbtxrx = addr; + au_sync(); + sp->psc_smbpcr = PSC_SMBPCR_MS; + au_sync(); + if (wait_ack(adap)) + return -EIO; + return 0; +} + +static u32 +wait_for_rx_byte(struct i2c_au1550_data *adap, u32 *ret_data) +{ + int j; + u32 data, stat; + volatile psc_smb_t *sp; + + if (wait_xfer_done(adap)) + return -EIO; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + j = adap->xfer_timeout * 100; + do { + j--; + if (j <= 0) + return -EIO; + + stat = sp->psc_smbstat; + au_sync(); + if ((stat & PSC_SMBSTAT_RE) == 0) + j = 0; + else + udelay(1); + } while (j > 0); + data = sp->psc_smbtxrx; + au_sync(); + *ret_data = data; + + return 0; +} + +static int +i2c_read(struct i2c_au1550_data *adap, unsigned char *buf, + unsigned int len) +{ + int i; + u32 data; + volatile psc_smb_t *sp; + + if (len == 0) + return 0; + + /* A read is performed by stuffing the transmit fifo with + * zero bytes for timing, waiting for bytes to appear in the + * receive fifo, then reading the bytes. + */ + + sp = (volatile psc_smb_t *)(adap->psc_base); + + i = 0; + while (i < (len-1)) { + sp->psc_smbtxrx = 0; + au_sync(); + if (wait_for_rx_byte(adap, &data)) + return -EIO; + + buf[i] = data; + i++; + } + + /* The last byte has to indicate transfer done. + */ + sp->psc_smbtxrx = PSC_SMBTXRX_STP; + au_sync(); + if (wait_master_done(adap)) + return -EIO; + + data = sp->psc_smbtxrx; + au_sync(); + buf[i] = data; + return 0; +} + +static int +i2c_write(struct i2c_au1550_data *adap, unsigned char *buf, + unsigned int len) +{ + int i; + u32 data; + volatile psc_smb_t *sp; + + if (len == 0) + return 0; + + sp = (volatile psc_smb_t *)(adap->psc_base); + + i = 0; + while (i < (len-1)) { + data = buf[i]; + sp->psc_smbtxrx = data; + au_sync(); + if (wait_ack(adap)) + return -EIO; + i++; + } + + /* The last byte has to indicate transfer done. + */ + data = buf[i]; + data |= PSC_SMBTXRX_STP; + sp->psc_smbtxrx = data; + au_sync(); + if (wait_master_done(adap)) + return -EIO; + return 0; +} + +static int +au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num) +{ + struct i2c_au1550_data *adap = i2c_adap->algo_data; + struct i2c_msg *p; + int i, err = 0; + + for (i = 0; !err && i < num; i++) { + p = &msgs[i]; + err = do_address(adap, p->addr, p->flags & I2C_M_RD); + if (err || !p->len) + continue; + if (p->flags & I2C_M_RD) + err = i2c_read(adap, p->buf, p->len); + else + err = i2c_write(adap, p->buf, p->len); + } + + /* Return the number of messages processed, or the error code. + */ + if (err == 0) + err = num; + return err; +} + +static u32 +au1550_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm au1550_algo = { + .name = "Au1550 algorithm", + .id = I2C_ALGO_AU1550, + .master_xfer = au1550_xfer, + .functionality = au1550_func, +}; + +/* + * registering functions to load algorithms at runtime + * Prior to calling us, the 50MHz clock frequency and routing + * must have been set up for the PSC indicated by the adapter. + */ +int +i2c_au1550_add_bus(struct i2c_adapter *i2c_adap) +{ + struct i2c_au1550_data *adap = i2c_adap->algo_data; + volatile psc_smb_t *sp; + u32 stat; + + i2c_adap->algo = &au1550_algo; + + /* Now, set up the PSC for SMBus PIO mode. + */ + sp = (volatile psc_smb_t *)(adap->psc_base); + sp->psc_ctrl = PSC_CTRL_DISABLE; + au_sync(); + sp->psc_sel = PSC_SEL_PS_SMBUSMODE; + sp->psc_smbcfg = 0; + au_sync(); + sp->psc_ctrl = PSC_CTRL_ENABLE; + au_sync(); + do { + stat = sp->psc_smbstat; + au_sync(); + } while ((stat & PSC_SMBSTAT_SR) == 0); + + sp->psc_smbcfg = (PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | + PSC_SMBCFG_DD_DISABLE); + + /* Divide by 8 to get a 6.25 MHz clock. The later protocol + * timings are based on this clock. + */ + sp->psc_smbcfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8); + sp->psc_smbmsk = PSC_SMBMSK_ALLMASK; + au_sync(); + + /* Set the protocol timer values. See Table 71 in the + * Au1550 Data Book for standard timing values. + */ + sp->psc_smbtmr = PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \ + PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \ + PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \ + PSC_SMBTMR_SET_CH(15); + au_sync(); + + sp->psc_smbcfg |= PSC_SMBCFG_DE_ENABLE; + do { + stat = sp->psc_smbstat; + au_sync(); + } while ((stat & PSC_SMBSTAT_DR) == 0); + + return i2c_add_adapter(i2c_adap); +} + + +int +i2c_au1550_del_bus(struct i2c_adapter *adap) +{ + return i2c_del_adapter(adap); +} + +static int +pb1550_reg(struct i2c_client *client) +{ + return 0; +} + +static int +pb1550_unreg(struct i2c_client *client) +{ + return 0; +} + +static struct i2c_au1550_data pb1550_i2c_info = { + SMBUS_PSC_BASE, 200, 200 +}; + +static struct i2c_adapter pb1550_board_adapter = { + name: "pb1550 adapter", + id: I2C_HW_AU1550_PSC, + algo: NULL, + algo_data: &pb1550_i2c_info, + client_register: pb1550_reg, + client_unregister: pb1550_unreg, +}; + +/* BIG hack to support the control interface on the Wolfson WM8731 + * audio codec on the Pb1550 board. We get an address and two data + * bytes to write, create an i2c message, and send it across the + * i2c transfer function. We do this here because we have access to + * the i2c adapter structure. + */ +static struct i2c_msg wm_i2c_msg; /* We don't want this stuff on the stack */ +static u8 i2cbuf[2]; + +int +pb1550_wm_codec_write(u8 addr, u8 reg, u8 val) +{ + wm_i2c_msg.addr = addr; + wm_i2c_msg.flags = 0; + wm_i2c_msg.buf = i2cbuf; + wm_i2c_msg.len = 2; + i2cbuf[0] = reg; + i2cbuf[1] = val; + + return pb1550_board_adapter.algo->master_xfer(&pb1550_board_adapter, &wm_i2c_msg, 1); +} + +static int __init +i2c_au1550_init(void) +{ + printk(KERN_INFO "Au1550 I2C: "); + + /* This is where we would set up a 50MHz clock source + * and routing. On the Pb1550, the SMBus is PSC2, which + * uses a shared clock with USB. This has been already + * configured by Yamon as a 48MHz clock, close enough + * for our work. + */ + if (i2c_au1550_add_bus(&pb1550_board_adapter) < 0) { + printk("failed to initialize.\n"); + return -ENODEV; + } + + printk("initialized.\n"); + return 0; +} + +static void __exit +i2c_au1550_exit(void) +{ + i2c_au1550_del_bus(&pb1550_board_adapter); +} + +MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC."); +MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550"); +MODULE_LICENSE("GPL"); + +module_init (i2c_au1550_init); +module_exit (i2c_au1550_exit); diff --git a/drivers/i2c/busses/i2c-au1550.h b/drivers/i2c/busses/i2c-au1550.h new file mode 100644 index 00000000000..fce15d161ae --- /dev/null +++ b/drivers/i2c/busses/i2c-au1550.h @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com> + * 2.6 port by Matt Porter <mporter@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef I2C_AU1550_H +#define I2C_AU1550_H + +struct i2c_au1550_data { + u32 psc_base; + int xfer_timeout; + int ack_timeout; +}; + +int i2c_au1550_add_bus(struct i2c_adapter *); +int i2c_au1550_del_bus(struct i2c_adapter *); + +#endif /* I2C_AU1550_H */ diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c new file mode 100644 index 00000000000..0a7720000a0 --- /dev/null +++ b/drivers/i2c/busses/i2c-elektor.c @@ -0,0 +1,295 @@ +/* ------------------------------------------------------------------------- */ +/* i2c-elektor.c i2c-hw access for PCF8584 style isa bus adaptes */ +/* ------------------------------------------------------------------------- */ +/* Copyright (C) 1995-97 Simon G. Vogl + 1998-99 Hans Berglund + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* ------------------------------------------------------------------------- */ + +/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even + Frodo Looijaard <frodol@dds.nl> */ + +/* Partialy rewriten by Oleg I. Vdovikin for mmapped support of + for Alpha Processor Inc. UP-2000(+) boards */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/wait.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-pcf.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include "../algos/i2c-algo-pcf.h" + +#define DEFAULT_BASE 0x330 + +static int base; +static int irq; +static int clock = 0x1c; +static int own = 0x55; +static int mmapped; + +/* vdovikin: removed static struct i2c_pcf_isa gpi; code - + this module in real supports only one device, due to missing arguments + in some functions, called from the algo-pcf module. Sometimes it's + need to be rewriten - but for now just remove this for simpler reading */ + +static wait_queue_head_t pcf_wait; +static int pcf_pending; +static spinlock_t lock; + +/* ----- local functions ---------------------------------------------- */ + +static void pcf_isa_setbyte(void *data, int ctl, int val) +{ + int address = ctl ? (base + 1) : base; + + /* enable irq if any specified for serial operation */ + if (ctl && irq && (val & I2C_PCF_ESO)) { + val |= I2C_PCF_ENI; + } + + pr_debug("i2c-elektor: Write 0x%X 0x%02X\n", address, val & 255); + + switch (mmapped) { + case 0: /* regular I/O */ + outb(val, address); + break; + case 2: /* double mapped I/O needed for UP2000 board, + I don't know why this... */ + writeb(val, (void *)address); + /* fall */ + case 1: /* memory mapped I/O */ + writeb(val, (void *)address); + break; + } +} + +static int pcf_isa_getbyte(void *data, int ctl) +{ + int address = ctl ? (base + 1) : base; + int val = mmapped ? readb((void *)address) : inb(address); + + pr_debug("i2c-elektor: Read 0x%X 0x%02X\n", address, val); + + return (val); +} + +static int pcf_isa_getown(void *data) +{ + return (own); +} + + +static int pcf_isa_getclock(void *data) +{ + return (clock); +} + +static void pcf_isa_waitforpin(void) { + DEFINE_WAIT(wait); + int timeout = 2; + unsigned long flags; + + if (irq > 0) { + spin_lock_irqsave(&lock, flags); + if (pcf_pending == 0) { + spin_unlock_irqrestore(&lock, flags); + prepare_to_wait(&pcf_wait, &wait, TASK_INTERRUPTIBLE); + if (schedule_timeout(timeout*HZ)) { + spin_lock_irqsave(&lock, flags); + if (pcf_pending == 1) { + pcf_pending = 0; + } + spin_unlock_irqrestore(&lock, flags); + } + finish_wait(&pcf_wait, &wait); + } else { + pcf_pending = 0; + spin_unlock_irqrestore(&lock, flags); + } + } else { + udelay(100); + } +} + + +static irqreturn_t pcf_isa_handler(int this_irq, void *dev_id, struct pt_regs *regs) { + spin_lock(&lock); + pcf_pending = 1; + spin_unlock(&lock); + wake_up_interruptible(&pcf_wait); + return IRQ_HANDLED; +} + + +static int pcf_isa_init(void) +{ + spin_lock_init(&lock); + if (!mmapped) { + if (!request_region(base, 2, "i2c (isa bus adapter)")) { + printk(KERN_ERR + "i2c-elektor: requested I/O region (0x%X:2) " + "is in use.\n", base); + return -ENODEV; + } + } + if (irq > 0) { + if (request_irq(irq, pcf_isa_handler, 0, "PCF8584", NULL) < 0) { + printk(KERN_ERR "i2c-elektor: Request irq%d failed\n", irq); + irq = 0; + } else + enable_irq(irq); + } + return 0; +} + +/* ------------------------------------------------------------------------ + * Encapsulate the above functions in the correct operations structure. + * This is only done when more than one hardware adapter is supported. + */ +static struct i2c_algo_pcf_data pcf_isa_data = { + .setpcf = pcf_isa_setbyte, + .getpcf = pcf_isa_getbyte, + .getown = pcf_isa_getown, + .getclock = pcf_isa_getclock, + .waitforpin = pcf_isa_waitforpin, + .udelay = 10, + .mdelay = 10, + .timeout = 100, +}; + +static struct i2c_adapter pcf_isa_ops = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .id = I2C_HW_P_ELEK, + .algo_data = &pcf_isa_data, + .name = "PCF8584 ISA adapter", +}; + +static int __init i2c_pcfisa_init(void) +{ +#ifdef __alpha__ + /* check to see we have memory mapped PCF8584 connected to the + Cypress cy82c693 PCI-ISA bridge as on UP2000 board */ + if (base == 0) { + struct pci_dev *cy693_dev; + + cy693_dev = pci_get_device(PCI_VENDOR_ID_CONTAQ, + PCI_DEVICE_ID_CONTAQ_82C693, NULL); + if (cy693_dev) { + char config; + /* yeap, we've found cypress, let's check config */ + if (!pci_read_config_byte(cy693_dev, 0x47, &config)) { + + pr_debug("i2c-elektor: found cy82c693, config register 0x47 = 0x%02x.\n", config); + + /* UP2000 board has this register set to 0xe1, + but the most significant bit as seems can be + reset during the proper initialisation + sequence if guys from API decides to do that + (so, we can even enable Tsunami Pchip + window for the upper 1 Gb) */ + + /* so just check for ROMCS at 0xe0000, + ROMCS enabled for writes + and external XD Bus buffer in use. */ + if ((config & 0x7f) == 0x61) { + /* seems to be UP2000 like board */ + base = 0xe0000; + /* I don't know why we need to + write twice */ + mmapped = 2; + /* UP2000 drives ISA with + 8.25 MHz (PCI/4) clock + (this can be read from cypress) */ + clock = I2C_PCF_CLK | I2C_PCF_TRNS90; + printk(KERN_INFO "i2c-elektor: found API UP2000 like board, will probe PCF8584 later.\n"); + } + } + pci_dev_put(cy693_dev); + } + } +#endif + + /* sanity checks for mmapped I/O */ + if (mmapped && base < 0xc8000) { + printk(KERN_ERR "i2c-elektor: incorrect base address (0x%0X) specified for mmapped I/O.\n", base); + return -ENODEV; + } + + printk(KERN_INFO "i2c-elektor: i2c pcf8584-isa adapter driver\n"); + + if (base == 0) { + base = DEFAULT_BASE; + } + + init_waitqueue_head(&pcf_wait); + if (pcf_isa_init()) + return -ENODEV; + if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) + goto fail; + + printk(KERN_ERR "i2c-elektor: found device at %#x.\n", base); + + return 0; + + fail: + if (irq > 0) { + disable_irq(irq); + free_irq(irq, NULL); + } + + if (!mmapped) + release_region(base , 2); + return -ENODEV; +} + +static void i2c_pcfisa_exit(void) +{ + i2c_pcf_del_bus(&pcf_isa_ops); + + if (irq > 0) { + disable_irq(irq); + free_irq(irq, NULL); + } + + if (!mmapped) + release_region(base , 2); +} + +MODULE_AUTHOR("Hans Berglund <hb@spacetec.no>"); +MODULE_DESCRIPTION("I2C-Bus adapter routines for PCF8584 ISA bus adapter"); +MODULE_LICENSE("GPL"); + +module_param(base, int, 0); +module_param(irq, int, 0); +module_param(clock, int, 0); +module_param(own, int, 0); +module_param(mmapped, int, 0); + +module_init(i2c_pcfisa_init); +module_exit(i2c_pcfisa_exit); diff --git a/drivers/i2c/busses/i2c-frodo.c b/drivers/i2c/busses/i2c-frodo.c new file mode 100644 index 00000000000..e093829a0bf --- /dev/null +++ b/drivers/i2c/busses/i2c-frodo.c @@ -0,0 +1,86 @@ + +/* + * linux/drivers/i2c/i2c-frodo.c + * + * Author: Abraham van der Merwe <abraham@2d3d.co.za> + * + * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110 + * Development board (Frodo). + * + * This source code is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/hardware.h> + + +static void frodo_setsda (void *data,int state) +{ + if (state) + FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT; + else + FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT; +} + +static void frodo_setscl (void *data,int state) +{ + if (state) + FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT; + else + FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT; +} + +static int frodo_getsda (void *data) +{ + return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0); +} + +static int frodo_getscl (void *data) +{ + return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0); +} + +static struct i2c_algo_bit_data bit_frodo_data = { + .setsda = frodo_setsda, + .setscl = frodo_setscl, + .getsda = frodo_getsda, + .getscl = frodo_getscl, + .udelay = 80, + .mdelay = 80, + .timeout = HZ +}; + +static struct i2c_adapter frodo_ops = { + .owner = THIS_MODULE, + .id = I2C_HW_B_FRODO, + .algo_data = &bit_frodo_data, + .dev = { + .name = "Frodo adapter driver", + }, +}; + +static int __init i2c_frodo_init (void) +{ + return i2c_bit_add_bus(&frodo_ops); +} + +static void __exit i2c_frodo_exit (void) +{ + i2c_bit_del_bus(&frodo_ops); +} + +MODULE_AUTHOR ("Abraham van der Merwe <abraham@2d3d.co.za>"); +MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo"); +MODULE_LICENSE ("GPL"); + +module_init (i2c_frodo_init); +module_exit (i2c_frodo_exit); + diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c new file mode 100644 index 00000000000..e0cb3b0f92f --- /dev/null +++ b/drivers/i2c/busses/i2c-hydra.c @@ -0,0 +1,183 @@ +/* + i2c-hydra.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + i2c Support for the Apple `Hydra' Mac I/O + + Copyright (c) 1999-2004 Geert Uytterhoeven <geert@linux-m68k.org> + + Based on i2c Support for Via Technologies 82C586B South Bridge + Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/init.h> +#include <asm/io.h> +#include <asm/hydra.h> + + +#define HYDRA_CPD_PD0 0x00000001 /* CachePD lines */ +#define HYDRA_CPD_PD1 0x00000002 +#define HYDRA_CPD_PD2 0x00000004 +#define HYDRA_CPD_PD3 0x00000008 + +#define HYDRA_SCLK HYDRA_CPD_PD0 +#define HYDRA_SDAT HYDRA_CPD_PD1 +#define HYDRA_SCLK_OE 0x00000010 +#define HYDRA_SDAT_OE 0x00000020 + +static inline void pdregw(void *data, u32 val) +{ + struct Hydra *hydra = (struct Hydra *)data; + writel(val, &hydra->CachePD); +} + +static inline u32 pdregr(void *data) +{ + struct Hydra *hydra = (struct Hydra *)data; + return readl(&hydra->CachePD); +} + +static void hydra_bit_setscl(void *data, int state) +{ + u32 val = pdregr(data); + if (state) + val &= ~HYDRA_SCLK_OE; + else { + val &= ~HYDRA_SCLK; + val |= HYDRA_SCLK_OE; + } + pdregw(data, val); +} + +static void hydra_bit_setsda(void *data, int state) +{ + u32 val = pdregr(data); + if (state) + val &= ~HYDRA_SDAT_OE; + else { + val &= ~HYDRA_SDAT; + val |= HYDRA_SDAT_OE; + } + pdregw(data, val); +} + +static int hydra_bit_getscl(void *data) +{ + return (pdregr(data) & HYDRA_SCLK) != 0; +} + +static int hydra_bit_getsda(void *data) +{ + return (pdregr(data) & HYDRA_SDAT) != 0; +} + +/* ------------------------------------------------------------------------ */ + +static struct i2c_algo_bit_data hydra_bit_data = { + .setsda = hydra_bit_setsda, + .setscl = hydra_bit_setscl, + .getsda = hydra_bit_getsda, + .getscl = hydra_bit_getscl, + .udelay = 5, + .mdelay = 5, + .timeout = HZ +}; + +static struct i2c_adapter hydra_adap = { + .owner = THIS_MODULE, + .name = "Hydra i2c", + .id = I2C_HW_B_HYDRA, + .algo_data = &hydra_bit_data, +}; + +static struct pci_device_id hydra_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_HYDRA) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, hydra_ids); + +static int __devinit hydra_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + unsigned long base = pci_resource_start(dev, 0); + int res; + + if (!request_mem_region(base+offsetof(struct Hydra, CachePD), 4, + hydra_adap.name)) + return -EBUSY; + + hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0)); + if (hydra_bit_data.data == NULL) { + release_mem_region(base+offsetof(struct Hydra, CachePD), 4); + return -ENODEV; + } + + pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */ + hydra_adap.dev.parent = &dev->dev; + res = i2c_bit_add_bus(&hydra_adap); + if (res < 0) { + iounmap(hydra_bit_data.data); + release_mem_region(base+offsetof(struct Hydra, CachePD), 4); + return res; + } + return 0; +} + +static void __devexit hydra_remove(struct pci_dev *dev) +{ + pdregw(hydra_bit_data.data, 0); /* clear SCLK_OE and SDAT_OE */ + i2c_bit_del_bus(&hydra_adap); + iounmap(hydra_bit_data.data); + release_mem_region(pci_resource_start(dev, 0)+ + offsetof(struct Hydra, CachePD), 4); +} + + +static struct pci_driver hydra_driver = { + .name = "hydra_smbus", + .id_table = hydra_ids, + .probe = hydra_probe, + .remove = __devexit_p(hydra_remove), +}; + +static int __init i2c_hydra_init(void) +{ + return pci_register_driver(&hydra_driver); +} + + +static void __exit i2c_hydra_exit(void) +{ + pci_unregister_driver(&hydra_driver); +} + + + +MODULE_AUTHOR("Geert Uytterhoeven <geert@linux-m68k.org>"); +MODULE_DESCRIPTION("i2c for Apple Hydra Mac I/O"); +MODULE_LICENSE("GPL"); + +module_init(i2c_hydra_init); +module_exit(i2c_hydra_exit); + diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c new file mode 100644 index 00000000000..6ec8b21965e --- /dev/null +++ b/drivers/i2c/busses/i2c-i801.c @@ -0,0 +1,613 @@ +/* + i801.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, and Mark D. Studebaker + <mdsxyz123@yahoo.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + SUPPORTED DEVICES PCI ID + 82801AA 2413 + 82801AB 2423 + 82801BA 2443 + 82801CA/CAM 2483 + 82801DB 24C3 (HW PEC supported, 32 byte buffer not supported) + 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported) + 6300ESB 25A4 + ICH6 266A + ICH7 27DA + This driver supports several versions of Intel's I/O Controller Hubs (ICH). + For SMBus support, they are similar to the PIIX4 and are part + of Intel's '810' and other chipsets. + See the doc/busses/i2c-i801 file for details. + I2C Block Read and Process Call are not supported. +*/ + +/* Note: we assume there can only be one I801, with one SMBus interface */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/delay.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <asm/io.h> + +#ifdef I2C_FUNC_SMBUS_BLOCK_DATA_PEC +#define HAVE_PEC +#endif + +/* I801 SMBus address offsets */ +#define SMBHSTSTS (0 + i801_smba) +#define SMBHSTCNT (2 + i801_smba) +#define SMBHSTCMD (3 + i801_smba) +#define SMBHSTADD (4 + i801_smba) +#define SMBHSTDAT0 (5 + i801_smba) +#define SMBHSTDAT1 (6 + i801_smba) +#define SMBBLKDAT (7 + i801_smba) +#define SMBPEC (8 + i801_smba) /* ICH4 only */ +#define SMBAUXSTS (12 + i801_smba) /* ICH4 only */ +#define SMBAUXCTL (13 + i801_smba) /* ICH4 only */ + +/* PCI Address Constants */ +#define SMBBA 0x020 +#define SMBHSTCFG 0x040 +#define SMBREV 0x008 + +/* Host configuration bits for SMBHSTCFG */ +#define SMBHSTCFG_HST_EN 1 +#define SMBHSTCFG_SMB_SMI_EN 2 +#define SMBHSTCFG_I2C_EN 4 + +/* Other settings */ +#define MAX_TIMEOUT 100 +#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */ + +/* I801 command constants */ +#define I801_QUICK 0x00 +#define I801_BYTE 0x04 +#define I801_BYTE_DATA 0x08 +#define I801_WORD_DATA 0x0C +#define I801_PROC_CALL 0x10 /* later chips only, unimplemented */ +#define I801_BLOCK_DATA 0x14 +#define I801_I2C_BLOCK_DATA 0x18 /* unimplemented */ +#define I801_BLOCK_LAST 0x34 +#define I801_I2C_BLOCK_LAST 0x38 /* unimplemented */ +#define I801_START 0x40 +#define I801_PEC_EN 0x80 /* ICH4 only */ + +/* insmod parameters */ + +/* If force_addr is set to anything different from 0, we forcibly enable + the I801 at the given address. VERY DANGEROUS! */ +static u16 force_addr; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Forcibly enable the I801 at the given address. " + "EXTREMELY DANGEROUS!"); + +static int i801_transaction(void); +static int i801_block_transaction(union i2c_smbus_data *data, + char read_write, int command); + +static unsigned short i801_smba; +static struct pci_dev *I801_dev; +static int isich4; + +static int i801_setup(struct pci_dev *dev) +{ + int error_return = 0; + unsigned char temp; + + /* Note: we keep on searching until we have found 'function 3' */ + if(PCI_FUNC(dev->devfn) != 3) + return -ENODEV; + + I801_dev = dev; + if ((dev->device == PCI_DEVICE_ID_INTEL_82801DB_3) || + (dev->device == PCI_DEVICE_ID_INTEL_82801EB_3) || + (dev->device == PCI_DEVICE_ID_INTEL_ESB_4)) + isich4 = 1; + else + isich4 = 0; + + /* Determine the address of the SMBus areas */ + if (force_addr) { + i801_smba = force_addr & 0xfff0; + } else { + pci_read_config_word(I801_dev, SMBBA, &i801_smba); + i801_smba &= 0xfff0; + if(i801_smba == 0) { + dev_err(&dev->dev, "SMB base address uninitialized" + "- upgrade BIOS or use force_addr=0xaddr\n"); + return -ENODEV; + } + } + + if (!request_region(i801_smba, (isich4 ? 16 : 8), "i801-smbus")) { + dev_err(&dev->dev, "I801_smb region 0x%x already in use!\n", + i801_smba); + error_return = -EBUSY; + goto END; + } + + pci_read_config_byte(I801_dev, SMBHSTCFG, &temp); + temp &= ~SMBHSTCFG_I2C_EN; /* SMBus timing */ + pci_write_config_byte(I801_dev, SMBHSTCFG, temp); + + /* If force_addr is set, we program the new address here. Just to make + sure, we disable the device first. */ + if (force_addr) { + pci_write_config_byte(I801_dev, SMBHSTCFG, temp & 0xfe); + pci_write_config_word(I801_dev, SMBBA, i801_smba); + pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 0x01); + dev_warn(&dev->dev, "WARNING: I801 SMBus interface set to " + "new address %04x!\n", i801_smba); + } else if ((temp & 1) == 0) { + pci_write_config_byte(I801_dev, SMBHSTCFG, temp | 1); + dev_warn(&dev->dev, "enabling SMBus device\n"); + } + + if (temp & 0x02) + dev_dbg(&dev->dev, "I801 using Interrupt SMI# for SMBus.\n"); + else + dev_dbg(&dev->dev, "I801 using PCI Interrupt for SMBus.\n"); + + pci_read_config_byte(I801_dev, SMBREV, &temp); + dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&dev->dev, "I801_smba = 0x%X\n", i801_smba); + +END: + return error_return; +} + +static int i801_transaction(void) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&I801_dev->dev, "Transaction (pre): CNT=%02x, CMD=%02x," + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + /* 0x1f = Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ + if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { + dev_dbg(&I801_dev->dev, "SMBus busy (%02x). Resetting... \n", + temp); + outb_p(temp, SMBHSTSTS); + if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { + dev_dbg(&I801_dev->dev, "Failed! (%02x)\n", temp); + return -1; + } else { + dev_dbg(&I801_dev->dev, "Successfull!\n"); + } + } + + outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT); + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); + result = -1; + } + + if (temp & 0x10) { + result = -1; + dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n"); + } + + if (temp & 0x08) { + result = -1; + dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked " + "until next hard reset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } + + if (temp & 0x04) { + result = -1; + dev_dbg(&I801_dev->dev, "Error: no response!\n"); + } + + if ((inb_p(SMBHSTSTS) & 0x1f) != 0x00) + outb_p(inb(SMBHSTSTS), SMBHSTSTS); + + if ((temp = (0x1f & inb_p(SMBHSTSTS))) != 0x00) { + dev_dbg(&I801_dev->dev, "Failed reset at end of transaction" + "(%02x)\n", temp); + } + dev_dbg(&I801_dev->dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + return result; +} + +/* All-inclusive block transaction function */ +static int i801_block_transaction(union i2c_smbus_data *data, char read_write, + int command) +{ + int i, len; + int smbcmd; + int temp; + int result = 0; + int timeout; + unsigned char hostc, errmask; + + if (command == I2C_SMBUS_I2C_BLOCK_DATA) { + if (read_write == I2C_SMBUS_WRITE) { + /* set I2C_EN bit in configuration register */ + pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc); + pci_write_config_byte(I801_dev, SMBHSTCFG, + hostc | SMBHSTCFG_I2C_EN); + } else { + dev_err(&I801_dev->dev, + "I2C_SMBUS_I2C_BLOCK_READ not DB!\n"); + return -1; + } + } + + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 1) + len = 1; + if (len > 32) + len = 32; + outb_p(len, SMBHSTDAT0); + outb_p(data->block[1], SMBBLKDAT); + } else { + len = 32; /* max for reads */ + } + + if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) { + /* set 32 byte buffer */ + } + + for (i = 1; i <= len; i++) { + if (i == len && read_write == I2C_SMBUS_READ) + smbcmd = I801_BLOCK_LAST; + else + smbcmd = I801_BLOCK_DATA; + outb_p(smbcmd | ENABLE_INT9, SMBHSTCNT); + + dev_dbg(&I801_dev->dev, "Block (pre %d): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i, + inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), + inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT)); + + /* Make sure the SMBus host is ready to start transmitting */ + temp = inb_p(SMBHSTSTS); + if (i == 1) { + /* Erronenous conditions before transaction: + * Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */ + errmask=0x9f; + } else { + /* Erronenous conditions during transaction: + * Failed, Bus_Err, Dev_Err, Intr */ + errmask=0x1e; + } + if (temp & errmask) { + dev_dbg(&I801_dev->dev, "SMBus busy (%02x). " + "Resetting... \n", temp); + outb_p(temp, SMBHSTSTS); + if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) { + dev_err(&I801_dev->dev, + "Reset failed! (%02x)\n", temp); + result = -1; + goto END; + } + if (i != 1) { + /* if die in middle of block transaction, fail */ + result = -1; + goto END; + } + } + + if (i == 1) + outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT); + + /* We will always wait for a fraction of a second! */ + timeout = 0; + do { + temp = inb_p(SMBHSTSTS); + msleep(1); + } + while ((!(temp & 0x80)) + && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + result = -1; + dev_dbg(&I801_dev->dev, "SMBus Timeout!\n"); + } + + if (temp & 0x10) { + result = -1; + dev_dbg(&I801_dev->dev, + "Error: Failed bus transaction\n"); + } else if (temp & 0x08) { + result = -1; + dev_err(&I801_dev->dev, "Bus collision!\n"); + } else if (temp & 0x04) { + result = -1; + dev_dbg(&I801_dev->dev, "Error: no response!\n"); + } + + if (i == 1 && read_write == I2C_SMBUS_READ) { + len = inb_p(SMBHSTDAT0); + if (len < 1) + len = 1; + if (len > 32) + len = 32; + data->block[0] = len; + } + + /* Retrieve/store value in SMBBLKDAT */ + if (read_write == I2C_SMBUS_READ) + data->block[i] = inb_p(SMBBLKDAT); + if (read_write == I2C_SMBUS_WRITE && i+1 <= len) + outb_p(data->block[i+1], SMBBLKDAT); + if ((temp & 0x9e) != 0x00) + outb_p(temp, SMBHSTSTS); /* signals SMBBLKDAT ready */ + + if ((temp = (0x1e & inb_p(SMBHSTSTS))) != 0x00) { + dev_dbg(&I801_dev->dev, + "Bad status (%02x) at end of transaction\n", + temp); + } + dev_dbg(&I801_dev->dev, "Block (post %d): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, BLKDAT=%02x\n", i, + inb_p(SMBHSTCNT), inb_p(SMBHSTCMD), inb_p(SMBHSTADD), + inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT)); + + if (result < 0) + goto END; + } + +#ifdef HAVE_PEC + if(isich4 && command == I2C_SMBUS_BLOCK_DATA_PEC) { + /* wait for INTR bit as advised by Intel */ + timeout = 0; + do { + temp = inb_p(SMBHSTSTS); + msleep(1); + } while ((!(temp & 0x02)) + && (timeout++ < MAX_TIMEOUT)); + + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); + } + outb_p(temp, SMBHSTSTS); + } +#endif + result = 0; +END: + if (command == I2C_SMBUS_I2C_BLOCK_DATA) { + /* restore saved configuration register value */ + pci_write_config_byte(I801_dev, SMBHSTCFG, hostc); + } + return result; +} + +/* Return -1 on error. */ +static s32 i801_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data * data) +{ + int hwpec = 0; + int block = 0; + int ret, xact = 0; + +#ifdef HAVE_PEC + if(isich4) + hwpec = (flags & I2C_CLIENT_PEC) != 0; +#endif + + switch (size) { + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + xact = I801_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + xact = I801_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + xact = I801_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + xact = I801_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_I2C_BLOCK_DATA: +#ifdef HAVE_PEC + case I2C_SMBUS_BLOCK_DATA_PEC: + if(hwpec && size == I2C_SMBUS_BLOCK_DATA) + size = I2C_SMBUS_BLOCK_DATA_PEC; +#endif + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + block = 1; + break; + case I2C_SMBUS_PROC_CALL: + default: + dev_err(&I801_dev->dev, "Unsupported transaction %d\n", size); + return -1; + } + +#ifdef HAVE_PEC + if(isich4 && hwpec) { + if(size != I2C_SMBUS_QUICK && + size != I2C_SMBUS_I2C_BLOCK_DATA) + outb_p(1, SMBAUXCTL); /* enable HW PEC */ + } +#endif + if(block) + ret = i801_block_transaction(data, read_write, size); + else { + outb_p(xact | ENABLE_INT9, SMBHSTCNT); + ret = i801_transaction(); + } + +#ifdef HAVE_PEC + if(isich4 && hwpec) { + if(size != I2C_SMBUS_QUICK && + size != I2C_SMBUS_I2C_BLOCK_DATA) + outb_p(0, SMBAUXCTL); + } +#endif + + if(block) + return ret; + if(ret) + return -1; + if ((read_write == I2C_SMBUS_WRITE) || (xact == I801_QUICK)) + return 0; + + switch (xact & 0x7f) { + case I801_BYTE: /* Result put in SMBHSTDAT0 */ + case I801_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case I801_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + } + return 0; +} + + +static u32 i801_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK +#ifdef HAVE_PEC + | (isich4 ? I2C_FUNC_SMBUS_BLOCK_DATA_PEC | + I2C_FUNC_SMBUS_HWPEC_CALC + : 0) +#endif + ; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = i801_access, + .functionality = i801_func, +}; + +static struct i2c_adapter i801_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static struct pci_device_id i801_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_2) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ESB_4) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_16) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_17) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, i801_ids); + +static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + + if (i801_setup(dev)) { + dev_warn(&dev->dev, + "I801 not detected, module not inserted.\n"); + return -ENODEV; + } + + /* set up the driverfs linkage to our parent device */ + i801_adapter.dev.parent = &dev->dev; + + snprintf(i801_adapter.name, I2C_NAME_SIZE, + "SMBus I801 adapter at %04x", i801_smba); + return i2c_add_adapter(&i801_adapter); +} + +static void __devexit i801_remove(struct pci_dev *dev) +{ + i2c_del_adapter(&i801_adapter); + release_region(i801_smba, (isich4 ? 16 : 8)); +} + +static struct pci_driver i801_driver = { + .name = "i801_smbus", + .id_table = i801_ids, + .probe = i801_probe, + .remove = __devexit_p(i801_remove), +}; + +static int __init i2c_i801_init(void) +{ + return pci_register_driver(&i801_driver); +} + +static void __exit i2c_i801_exit(void) +{ + pci_unregister_driver(&i801_driver); +} + +MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("I801 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_i801_init); +module_exit(i2c_i801_exit); diff --git a/drivers/i2c/busses/i2c-i810.c b/drivers/i2c/busses/i2c-i810.c new file mode 100644 index 00000000000..ef358bd9c3d --- /dev/null +++ b/drivers/i2c/busses/i2c-i810.c @@ -0,0 +1,260 @@ +/* + i2c-i810.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999, 2000 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + Ralph Metzler <rjkm@thp.uni-koeln.de>, and + Mark D. Studebaker <mdsxyz123@yahoo.com> + + Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and + Simon Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ +/* + This interfaces to the I810/I815 to provide access to + the DDC Bus and the I2C Bus. + + SUPPORTED DEVICES PCI ID + i810AA 7121 + i810AB 7123 + i810E 7125 + i815 1132 +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* GPIO register locations */ +#define I810_IOCONTROL_OFFSET 0x5000 +#define I810_HVSYNC 0x00 /* not used */ +#define I810_GPIOA 0x10 +#define I810_GPIOB 0x14 + +/* bit locations in the registers */ +#define SCL_DIR_MASK 0x0001 +#define SCL_DIR 0x0002 +#define SCL_VAL_MASK 0x0004 +#define SCL_VAL_OUT 0x0008 +#define SCL_VAL_IN 0x0010 +#define SDA_DIR_MASK 0x0100 +#define SDA_DIR 0x0200 +#define SDA_VAL_MASK 0x0400 +#define SDA_VAL_OUT 0x0800 +#define SDA_VAL_IN 0x1000 + +/* initialization states */ +#define INIT1 0x1 +#define INIT2 0x2 +#define INIT3 0x4 + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + +static void __iomem *ioaddr; + +/* The i810 GPIO registers have individual masks for each bit + so we never have to read before writing. Nice. */ + +static void bit_i810i2c_setscl(void *data, int val) +{ + writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK, + ioaddr + I810_GPIOB); + readl(ioaddr + I810_GPIOB); /* flush posted write */ +} + +static void bit_i810i2c_setsda(void *data, int val) +{ + writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK, + ioaddr + I810_GPIOB); + readl(ioaddr + I810_GPIOB); /* flush posted write */ +} + +/* The GPIO pins are open drain, so the pins could always remain outputs. + However, some chip versions don't latch the inputs unless they + are set as inputs. + We rely on the i2c-algo-bit routines to set the pins high before + reading the input from other chips. Following guidance in the 815 + prog. ref. guide, we do a "dummy write" of 0 to the register before + reading which forces the input value to be latched. We presume this + applies to the 810 as well; shouldn't hurt anyway. This is necessary to get + i2c_algo_bit bit_test=1 to pass. */ + +static int bit_i810i2c_getscl(void *data) +{ + writel(SCL_DIR_MASK, ioaddr + I810_GPIOB); + writel(0, ioaddr + I810_GPIOB); + return (0 != (readl(ioaddr + I810_GPIOB) & SCL_VAL_IN)); +} + +static int bit_i810i2c_getsda(void *data) +{ + writel(SDA_DIR_MASK, ioaddr + I810_GPIOB); + writel(0, ioaddr + I810_GPIOB); + return (0 != (readl(ioaddr + I810_GPIOB) & SDA_VAL_IN)); +} + +static void bit_i810ddc_setscl(void *data, int val) +{ + writel((val ? SCL_VAL_OUT : 0) | SCL_DIR | SCL_DIR_MASK | SCL_VAL_MASK, + ioaddr + I810_GPIOA); + readl(ioaddr + I810_GPIOA); /* flush posted write */ +} + +static void bit_i810ddc_setsda(void *data, int val) +{ + writel((val ? SDA_VAL_OUT : 0) | SDA_DIR | SDA_DIR_MASK | SDA_VAL_MASK, + ioaddr + I810_GPIOA); + readl(ioaddr + I810_GPIOA); /* flush posted write */ +} + +static int bit_i810ddc_getscl(void *data) +{ + writel(SCL_DIR_MASK, ioaddr + I810_GPIOA); + writel(0, ioaddr + I810_GPIOA); + return (0 != (readl(ioaddr + I810_GPIOA) & SCL_VAL_IN)); +} + +static int bit_i810ddc_getsda(void *data) +{ + writel(SDA_DIR_MASK, ioaddr + I810_GPIOA); + writel(0, ioaddr + I810_GPIOA); + return (0 != (readl(ioaddr + I810_GPIOA) & SDA_VAL_IN)); +} + +static int config_i810(struct pci_dev *dev) +{ + unsigned long cadr; + + /* map I810 memory */ + cadr = dev->resource[1].start; + cadr += I810_IOCONTROL_OFFSET; + cadr &= PCI_BASE_ADDRESS_MEM_MASK; + ioaddr = ioremap_nocache(cadr, 0x1000); + if (ioaddr) { + bit_i810i2c_setscl(NULL, 1); + bit_i810i2c_setsda(NULL, 1); + bit_i810ddc_setscl(NULL, 1); + bit_i810ddc_setsda(NULL, 1); + return 0; + } + return -ENODEV; +} + +static struct i2c_algo_bit_data i810_i2c_bit_data = { + .setsda = bit_i810i2c_setsda, + .setscl = bit_i810i2c_setscl, + .getsda = bit_i810i2c_getsda, + .getscl = bit_i810i2c_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT, +}; + +static struct i2c_adapter i810_i2c_adapter = { + .owner = THIS_MODULE, + .name = "I810/I815 I2C Adapter", + .algo_data = &i810_i2c_bit_data, +}; + +static struct i2c_algo_bit_data i810_ddc_bit_data = { + .setsda = bit_i810ddc_setsda, + .setscl = bit_i810ddc_setscl, + .getsda = bit_i810ddc_getsda, + .getscl = bit_i810ddc_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT, +}; + +static struct i2c_adapter i810_ddc_adapter = { + .owner = THIS_MODULE, + .name = "I810/I815 DDC Adapter", + .algo_data = &i810_ddc_bit_data, +}; + +static struct pci_device_id i810_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG1) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810_IG3) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82810E_IG) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82815_CGC) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82845G_IG) }, + { 0, }, +}; + +MODULE_DEVICE_TABLE (pci, i810_ids); + +static int __devinit i810_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + retval = config_i810(dev); + if (retval) + return retval; + dev_info(&dev->dev, "i810/i815 i2c device found.\n"); + + /* set up the sysfs linkage to our parent device */ + i810_i2c_adapter.dev.parent = &dev->dev; + i810_ddc_adapter.dev.parent = &dev->dev; + + retval = i2c_bit_add_bus(&i810_i2c_adapter); + if (retval) + return retval; + retval = i2c_bit_add_bus(&i810_ddc_adapter); + if (retval) + i2c_bit_del_bus(&i810_i2c_adapter); + return retval; +} + +static void __devexit i810_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&i810_ddc_adapter); + i2c_bit_del_bus(&i810_i2c_adapter); + iounmap(ioaddr); +} + +static struct pci_driver i810_driver = { + .name = "i810_smbus", + .id_table = i810_ids, + .probe = i810_probe, + .remove = __devexit_p(i810_remove), +}; + +static int __init i2c_i810_init(void) +{ + return pci_register_driver(&i810_driver); +} + +static void __exit i2c_i810_exit(void) +{ + pci_unregister_driver(&i810_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "Ralph Metzler <rjkm@thp.uni-koeln.de>, " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("I810/I815 I2C/DDC driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_i810_init); +module_exit(i2c_i810_exit); diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c new file mode 100644 index 00000000000..bb885215c08 --- /dev/null +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -0,0 +1,819 @@ +/* + * drivers/i2c/i2c-ibm_iic.c + * + * Support for the IIC peripheral on IBM PPC 4xx + * + * Copyright (c) 2003, 2004 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Ian DaSilva <idasilva@mvista.com> + * Armin Kuster <akuster@mvista.com> + * Matt Porter <mporter@mvista.com> + * + * Copyright 2000-2003 MontaVista Software Inc. + * + * Original driver version was highly leveraged from i2c-elektor.c + * + * Copyright 1995-97 Simon G. Vogl + * 1998-99 Hans Berglund + * + * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> + * and even Frodo Looijaard <frodol@dds.nl> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <asm/irq.h> +#include <asm/io.h> +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <asm/ocp.h> +#include <asm/ibm4xx.h> + +#include "i2c-ibm_iic.h" + +#define DRIVER_VERSION "2.1" + +MODULE_DESCRIPTION("IBM IIC driver v" DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static int iic_force_poll; +module_param(iic_force_poll, bool, 0); +MODULE_PARM_DESC(iic_force_poll, "Force polling mode"); + +static int iic_force_fast; +module_param(iic_force_fast, bool, 0); +MODULE_PARM_DESC(iic_fast_poll, "Force fast mode (400 kHz)"); + +#define DBG_LEVEL 0 + +#ifdef DBG +#undef DBG +#endif + +#ifdef DBG2 +#undef DBG2 +#endif + +#if DBG_LEVEL > 0 +# define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x) +#else +# define DBG(f,x...) ((void)0) +#endif +#if DBG_LEVEL > 1 +# define DBG2(f,x...) DBG(f, ##x) +#else +# define DBG2(f,x...) ((void)0) +#endif +#if DBG_LEVEL > 2 +static void dump_iic_regs(const char* header, struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header); + printk(KERN_DEBUG " cntl = 0x%02x, mdcntl = 0x%02x\n" + KERN_DEBUG " sts = 0x%02x, extsts = 0x%02x\n" + KERN_DEBUG " clkdiv = 0x%02x, xfrcnt = 0x%02x\n" + KERN_DEBUG " xtcntlss = 0x%02x, directcntl = 0x%02x\n", + in_8(&iic->cntl), in_8(&iic->mdcntl), in_8(&iic->sts), + in_8(&iic->extsts), in_8(&iic->clkdiv), in_8(&iic->xfrcnt), + in_8(&iic->xtcntlss), in_8(&iic->directcntl)); +} +# define DUMP_REGS(h,dev) dump_iic_regs((h),(dev)) +#else +# define DUMP_REGS(h,dev) ((void)0) +#endif + +/* Bus timings (in ns) for bit-banging */ +static struct i2c_timings { + unsigned int hd_sta; + unsigned int su_sto; + unsigned int low; + unsigned int high; + unsigned int buf; +} timings [] = { +/* Standard mode (100 KHz) */ +{ + .hd_sta = 4000, + .su_sto = 4000, + .low = 4700, + .high = 4000, + .buf = 4700, +}, +/* Fast mode (400 KHz) */ +{ + .hd_sta = 600, + .su_sto = 600, + .low = 1300, + .high = 600, + .buf = 1300, +}}; + +/* Enable/disable interrupt generation */ +static inline void iic_interrupt_mode(struct ibm_iic_private* dev, int enable) +{ + out_8(&dev->vaddr->intmsk, enable ? INTRMSK_EIMTC : 0); +} + +/* + * Initialize IIC interface. + */ +static void iic_dev_init(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + + DBG("%d: init\n", dev->idx); + + /* Clear master address */ + out_8(&iic->lmadr, 0); + out_8(&iic->hmadr, 0); + + /* Clear slave address */ + out_8(&iic->lsadr, 0); + out_8(&iic->hsadr, 0); + + /* Clear status & extended status */ + out_8(&iic->sts, STS_SCMP | STS_IRQA); + out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | EXTSTS_LA + | EXTSTS_ICT | EXTSTS_XFRA); + + /* Set clock divider */ + out_8(&iic->clkdiv, dev->clckdiv); + + /* Clear transfer count */ + out_8(&iic->xfrcnt, 0); + + /* Clear extended control and status */ + out_8(&iic->xtcntlss, XTCNTLSS_SRC | XTCNTLSS_SRS | XTCNTLSS_SWC + | XTCNTLSS_SWS); + + /* Clear control register */ + out_8(&iic->cntl, 0); + + /* Enable interrupts if possible */ + iic_interrupt_mode(dev, dev->irq >= 0); + + /* Set mode control */ + out_8(&iic->mdcntl, MDCNTL_FMDB | MDCNTL_EINT | MDCNTL_EUBS + | (dev->fast_mode ? MDCNTL_FSM : 0)); + + DUMP_REGS("iic_init", dev); +} + +/* + * Reset IIC interface + */ +static void iic_dev_reset(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + int i; + u8 dc; + + DBG("%d: soft reset\n", dev->idx); + DUMP_REGS("reset", dev); + + /* Place chip in the reset state */ + out_8(&iic->xtcntlss, XTCNTLSS_SRST); + + /* Check if bus is free */ + dc = in_8(&iic->directcntl); + if (!DIRCTNL_FREE(dc)){ + DBG("%d: trying to regain bus control\n", dev->idx); + + /* Try to set bus free state */ + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + + /* Wait until we regain bus control */ + for (i = 0; i < 100; ++i){ + dc = in_8(&iic->directcntl); + if (DIRCTNL_FREE(dc)) + break; + + /* Toggle SCL line */ + dc ^= DIRCNTL_SCC; + out_8(&iic->directcntl, dc); + udelay(10); + dc ^= DIRCNTL_SCC; + out_8(&iic->directcntl, dc); + + /* be nice */ + cond_resched(); + } + } + + /* Remove reset */ + out_8(&iic->xtcntlss, 0); + + /* Reinitialize interface */ + iic_dev_init(dev); +} + +/* + * Do 0-length transaction using bit-banging through IIC_DIRECTCNTL register. + */ + +/* Wait for SCL and/or SDA to be high */ +static int iic_dc_wait(volatile struct iic_regs __iomem *iic, u8 mask) +{ + unsigned long x = jiffies + HZ / 28 + 2; + while ((in_8(&iic->directcntl) & mask) != mask){ + if (unlikely(time_after(jiffies, x))) + return -1; + cond_resched(); + } + return 0; +} + +static int iic_smbus_quick(struct ibm_iic_private* dev, const struct i2c_msg* p) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + const struct i2c_timings* t = &timings[dev->fast_mode ? 1 : 0]; + u8 mask, v, sda; + int i, res; + + /* Only 7-bit addresses are supported */ + if (unlikely(p->flags & I2C_M_TEN)){ + DBG("%d: smbus_quick - 10 bit addresses are not supported\n", + dev->idx); + return -EINVAL; + } + + DBG("%d: smbus_quick(0x%02x)\n", dev->idx, p->addr); + + /* Reset IIC interface */ + out_8(&iic->xtcntlss, XTCNTLSS_SRST); + + /* Wait for bus to become free */ + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSDA | DIRCNTL_MSC))) + goto err; + ndelay(t->buf); + + /* START */ + out_8(&iic->directcntl, DIRCNTL_SCC); + sda = 0; + ndelay(t->hd_sta); + + /* Send address */ + v = (u8)((p->addr << 1) | ((p->flags & I2C_M_RD) ? 1 : 0)); + for (i = 0, mask = 0x80; i < 8; ++i, mask >>= 1){ + out_8(&iic->directcntl, sda); + ndelay(t->low / 2); + sda = (v & mask) ? DIRCNTL_SDAC : 0; + out_8(&iic->directcntl, sda); + ndelay(t->low / 2); + + out_8(&iic->directcntl, DIRCNTL_SCC | sda); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) + goto err; + ndelay(t->high); + } + + /* ACK */ + out_8(&iic->directcntl, sda); + ndelay(t->low / 2); + out_8(&iic->directcntl, DIRCNTL_SDAC); + ndelay(t->low / 2); + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) + goto err; + res = (in_8(&iic->directcntl) & DIRCNTL_MSDA) ? -EREMOTEIO : 1; + ndelay(t->high); + + /* STOP */ + out_8(&iic->directcntl, 0); + ndelay(t->low); + out_8(&iic->directcntl, DIRCNTL_SCC); + if (unlikely(iic_dc_wait(iic, DIRCNTL_MSC))) + goto err; + ndelay(t->su_sto); + out_8(&iic->directcntl, DIRCNTL_SDAC | DIRCNTL_SCC); + + ndelay(t->buf); + + DBG("%d: smbus_quick -> %s\n", dev->idx, res ? "NACK" : "ACK"); +out: + /* Remove reset */ + out_8(&iic->xtcntlss, 0); + + /* Reinitialize interface */ + iic_dev_init(dev); + + return res; +err: + DBG("%d: smbus_quick - bus is stuck\n", dev->idx); + res = -EREMOTEIO; + goto out; +} + +/* + * IIC interrupt handler + */ +static irqreturn_t iic_handler(int irq, void *dev_id, struct pt_regs *regs) +{ + struct ibm_iic_private* dev = (struct ibm_iic_private*)dev_id; + volatile struct iic_regs __iomem *iic = dev->vaddr; + + DBG2("%d: irq handler, STS = 0x%02x, EXTSTS = 0x%02x\n", + dev->idx, in_8(&iic->sts), in_8(&iic->extsts)); + + /* Acknowledge IRQ and wakeup iic_wait_for_tc */ + out_8(&iic->sts, STS_IRQA | STS_SCMP); + wake_up_interruptible(&dev->wq); + + return IRQ_HANDLED; +} + +/* + * Get master transfer result and clear errors if any. + * Returns the number of actually transferred bytes or error (<0) + */ +static int iic_xfer_result(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + + if (unlikely(in_8(&iic->sts) & STS_ERR)){ + DBG("%d: xfer error, EXTSTS = 0x%02x\n", dev->idx, + in_8(&iic->extsts)); + + /* Clear errors and possible pending IRQs */ + out_8(&iic->extsts, EXTSTS_IRQP | EXTSTS_IRQD | + EXTSTS_LA | EXTSTS_ICT | EXTSTS_XFRA); + + /* Flush master data buffer */ + out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); + + /* Is bus free? + * If error happened during combined xfer + * IIC interface is usually stuck in some strange + * state, the only way out - soft reset. + */ + if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ + DBG("%d: bus is stuck, resetting\n", dev->idx); + iic_dev_reset(dev); + } + return -EREMOTEIO; + } + else + return in_8(&iic->xfrcnt) & XFRCNT_MTC_MASK; +} + +/* + * Try to abort active transfer. + */ +static void iic_abort_xfer(struct ibm_iic_private* dev) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + unsigned long x; + + DBG("%d: iic_abort_xfer\n", dev->idx); + + out_8(&iic->cntl, CNTL_HMT); + + /* + * Wait for the abort command to complete. + * It's not worth to be optimized, just poll (timeout >= 1 tick) + */ + x = jiffies + 2; + while ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ + if (time_after(jiffies, x)){ + DBG("%d: abort timeout, resetting...\n", dev->idx); + iic_dev_reset(dev); + return; + } + schedule(); + } + + /* Just to clear errors */ + iic_xfer_result(dev); +} + +/* + * Wait for master transfer to complete. + * It puts current process to sleep until we get interrupt or timeout expires. + * Returns the number of transferred bytes or error (<0) + */ +static int iic_wait_for_tc(struct ibm_iic_private* dev){ + + volatile struct iic_regs __iomem *iic = dev->vaddr; + int ret = 0; + + if (dev->irq >= 0){ + /* Interrupt mode */ + ret = wait_event_interruptible_timeout(dev->wq, + !(in_8(&iic->sts) & STS_PT), dev->adap.timeout * HZ); + + if (unlikely(ret < 0)) + DBG("%d: wait interrupted\n", dev->idx); + else if (unlikely(in_8(&iic->sts) & STS_PT)){ + DBG("%d: wait timeout\n", dev->idx); + ret = -ETIMEDOUT; + } + } + else { + /* Polling mode */ + unsigned long x = jiffies + dev->adap.timeout * HZ; + + while (in_8(&iic->sts) & STS_PT){ + if (unlikely(time_after(jiffies, x))){ + DBG("%d: poll timeout\n", dev->idx); + ret = -ETIMEDOUT; + break; + } + + if (unlikely(signal_pending(current))){ + DBG("%d: poll interrupted\n", dev->idx); + ret = -ERESTARTSYS; + break; + } + schedule(); + } + } + + if (unlikely(ret < 0)) + iic_abort_xfer(dev); + else + ret = iic_xfer_result(dev); + + DBG2("%d: iic_wait_for_tc -> %d\n", dev->idx, ret); + + return ret; +} + +/* + * Low level master transfer routine + */ +static int iic_xfer_bytes(struct ibm_iic_private* dev, struct i2c_msg* pm, + int combined_xfer) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + char* buf = pm->buf; + int i, j, loops, ret = 0; + int len = pm->len; + + u8 cntl = (in_8(&iic->cntl) & CNTL_AMD) | CNTL_PT; + if (pm->flags & I2C_M_RD) + cntl |= CNTL_RW; + + loops = (len + 3) / 4; + for (i = 0; i < loops; ++i, len -= 4){ + int count = len > 4 ? 4 : len; + u8 cmd = cntl | ((count - 1) << CNTL_TCT_SHIFT); + + if (!(cntl & CNTL_RW)) + for (j = 0; j < count; ++j) + out_8((void __iomem *)&iic->mdbuf, *buf++); + + if (i < loops - 1) + cmd |= CNTL_CHT; + else if (combined_xfer) + cmd |= CNTL_RPST; + + DBG2("%d: xfer_bytes, %d, CNTL = 0x%02x\n", dev->idx, count, cmd); + + /* Start transfer */ + out_8(&iic->cntl, cmd); + + /* Wait for completion */ + ret = iic_wait_for_tc(dev); + + if (unlikely(ret < 0)) + break; + else if (unlikely(ret != count)){ + DBG("%d: xfer_bytes, requested %d, transfered %d\n", + dev->idx, count, ret); + + /* If it's not a last part of xfer, abort it */ + if (combined_xfer || (i < loops - 1)) + iic_abort_xfer(dev); + + ret = -EREMOTEIO; + break; + } + + if (cntl & CNTL_RW) + for (j = 0; j < count; ++j) + *buf++ = in_8((void __iomem *)&iic->mdbuf); + } + + return ret > 0 ? 0 : ret; +} + +/* + * Set target slave address for master transfer + */ +static inline void iic_address(struct ibm_iic_private* dev, struct i2c_msg* msg) +{ + volatile struct iic_regs __iomem *iic = dev->vaddr; + u16 addr = msg->addr; + + DBG2("%d: iic_address, 0x%03x (%d-bit)\n", dev->idx, + addr, msg->flags & I2C_M_TEN ? 10 : 7); + + if (msg->flags & I2C_M_TEN){ + out_8(&iic->cntl, CNTL_AMD); + out_8(&iic->lmadr, addr); + out_8(&iic->hmadr, 0xf0 | ((addr >> 7) & 0x06)); + } + else { + out_8(&iic->cntl, 0); + out_8(&iic->lmadr, addr << 1); + } +} + +static inline int iic_invalid_address(const struct i2c_msg* p) +{ + return (p->addr > 0x3ff) || (!(p->flags & I2C_M_TEN) && (p->addr > 0x7f)); +} + +static inline int iic_address_neq(const struct i2c_msg* p1, + const struct i2c_msg* p2) +{ + return (p1->addr != p2->addr) + || ((p1->flags & I2C_M_TEN) != (p2->flags & I2C_M_TEN)); +} + +/* + * Generic master transfer entrypoint. + * Returns the number of processed messages or error (<0) + */ +static int iic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct ibm_iic_private* dev = (struct ibm_iic_private*)(i2c_get_adapdata(adap)); + volatile struct iic_regs __iomem *iic = dev->vaddr; + int i, ret = 0; + + DBG2("%d: iic_xfer, %d msg(s)\n", dev->idx, num); + + if (!num) + return 0; + + /* Check the sanity of the passed messages. + * Uhh, generic i2c layer is more suitable place for such code... + */ + if (unlikely(iic_invalid_address(&msgs[0]))){ + DBG("%d: invalid address 0x%03x (%d-bit)\n", dev->idx, + msgs[0].addr, msgs[0].flags & I2C_M_TEN ? 10 : 7); + return -EINVAL; + } + for (i = 0; i < num; ++i){ + if (unlikely(msgs[i].len <= 0)){ + if (num == 1 && !msgs[0].len){ + /* Special case for I2C_SMBUS_QUICK emulation. + * IBM IIC doesn't support 0-length transactions + * so we have to emulate them using bit-banging. + */ + return iic_smbus_quick(dev, &msgs[0]); + } + DBG("%d: invalid len %d in msg[%d]\n", dev->idx, + msgs[i].len, i); + return -EINVAL; + } + if (unlikely(iic_address_neq(&msgs[0], &msgs[i]))){ + DBG("%d: invalid addr in msg[%d]\n", dev->idx, i); + return -EINVAL; + } + } + + /* Check bus state */ + if (unlikely((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE)){ + DBG("%d: iic_xfer, bus is not free\n", dev->idx); + + /* Usually it means something serious has happend. + * We *cannot* have unfinished previous transfer + * so it doesn't make any sense to try to stop it. + * Probably we were not able to recover from the + * previous error. + * The only *reasonable* thing I can think of here + * is soft reset. --ebs + */ + iic_dev_reset(dev); + + if ((in_8(&iic->extsts) & EXTSTS_BCS_MASK) != EXTSTS_BCS_FREE){ + DBG("%d: iic_xfer, bus is still not free\n", dev->idx); + return -EREMOTEIO; + } + } + else { + /* Flush master data buffer (just in case) */ + out_8(&iic->mdcntl, in_8(&iic->mdcntl) | MDCNTL_FMDB); + } + + /* Load slave address */ + iic_address(dev, &msgs[0]); + + /* Do real transfer */ + for (i = 0; i < num && !ret; ++i) + ret = iic_xfer_bytes(dev, &msgs[i], i < num - 1); + + return ret < 0 ? ret : num; +} + +static u32 iic_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR; +} + +static struct i2c_algorithm iic_algo = { + .name = "IBM IIC algorithm", + .id = I2C_ALGO_OCP, + .master_xfer = iic_xfer, + .functionality = iic_func +}; + +/* + * Calculates IICx_CLCKDIV value for a specific OPB clock frequency + */ +static inline u8 iic_clckdiv(unsigned int opb) +{ + /* Compatibility kludge, should go away after all cards + * are fixed to fill correct value for opbfreq. + * Previous driver version used hardcoded divider value 4, + * it corresponds to OPB frequency from the range (40, 50] MHz + */ + if (!opb){ + printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq," + " fix your board specific setup\n"); + opb = 50000000; + } + + /* Convert to MHz */ + opb /= 1000000; + + if (opb < 20 || opb > 150){ + printk(KERN_CRIT "ibm-iic: invalid OPB clock frequency %u MHz\n", + opb); + opb = opb < 20 ? 20 : 150; + } + return (u8)((opb + 9) / 10 - 1); +} + +/* + * Register single IIC interface + */ +static int __devinit iic_probe(struct ocp_device *ocp){ + + struct ibm_iic_private* dev; + struct i2c_adapter* adap; + struct ocp_func_iic_data* iic_data = ocp->def->additions; + int ret; + + if (!iic_data) + printk(KERN_WARNING"ibm-iic%d: missing additional data!\n", + ocp->def->index); + + if (!(dev = kmalloc(sizeof(*dev), GFP_KERNEL))){ + printk(KERN_CRIT "ibm-iic%d: failed to allocate device data\n", + ocp->def->index); + return -ENOMEM; + } + + memset(dev, 0, sizeof(*dev)); + dev->idx = ocp->def->index; + ocp_set_drvdata(ocp, dev); + + if (!(dev->vaddr = ioremap(ocp->def->paddr, sizeof(struct iic_regs)))){ + printk(KERN_CRIT "ibm-iic%d: failed to ioremap device registers\n", + dev->idx); + ret = -ENXIO; + goto fail2; + } + + init_waitqueue_head(&dev->wq); + + dev->irq = iic_force_poll ? -1 : ocp->def->irq; + if (dev->irq >= 0){ + /* Disable interrupts until we finish intialization, + assumes level-sensitive IRQ setup... + */ + iic_interrupt_mode(dev, 0); + if (request_irq(dev->irq, iic_handler, 0, "IBM IIC", dev)){ + printk(KERN_ERR "ibm-iic%d: request_irq %d failed\n", + dev->idx, dev->irq); + /* Fallback to the polling mode */ + dev->irq = -1; + } + } + + if (dev->irq < 0) + printk(KERN_WARNING "ibm-iic%d: using polling mode\n", + dev->idx); + + /* Board specific settings */ + dev->fast_mode = iic_force_fast ? 1 : (iic_data ? iic_data->fast_mode : 0); + + /* clckdiv is the same for *all* IIC interfaces, + * but I'd rather make a copy than introduce another global. --ebs + */ + dev->clckdiv = iic_clckdiv(ocp_sys_info.opb_bus_freq); + DBG("%d: clckdiv = %d\n", dev->idx, dev->clckdiv); + + /* Initialize IIC interface */ + iic_dev_init(dev); + + /* Register it with i2c layer */ + adap = &dev->adap; + strcpy(adap->name, "IBM IIC"); + i2c_set_adapdata(adap, dev); + adap->id = I2C_HW_OCP | iic_algo.id; + adap->algo = &iic_algo; + adap->client_register = NULL; + adap->client_unregister = NULL; + adap->timeout = 1; + adap->retries = 1; + + if ((ret = i2c_add_adapter(adap)) != 0){ + printk(KERN_CRIT "ibm-iic%d: failed to register i2c adapter\n", + dev->idx); + goto fail; + } + + printk(KERN_INFO "ibm-iic%d: using %s mode\n", dev->idx, + dev->fast_mode ? "fast (400 kHz)" : "standard (100 kHz)"); + + return 0; + +fail: + if (dev->irq >= 0){ + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + } + + iounmap(dev->vaddr); +fail2: + ocp_set_drvdata(ocp, NULL); + kfree(dev); + return ret; +} + +/* + * Cleanup initialized IIC interface + */ +static void __devexit iic_remove(struct ocp_device *ocp) +{ + struct ibm_iic_private* dev = (struct ibm_iic_private*)ocp_get_drvdata(ocp); + BUG_ON(dev == NULL); + if (i2c_del_adapter(&dev->adap)){ + printk(KERN_CRIT "ibm-iic%d: failed to delete i2c adapter :(\n", + dev->idx); + /* That's *very* bad, just shutdown IRQ ... */ + if (dev->irq >= 0){ + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + dev->irq = -1; + } + } else { + if (dev->irq >= 0){ + iic_interrupt_mode(dev, 0); + free_irq(dev->irq, dev); + } + iounmap(dev->vaddr); + kfree(dev); + } +} + +static struct ocp_device_id ibm_iic_ids[] __devinitdata = +{ + { .vendor = OCP_VENDOR_IBM, .function = OCP_FUNC_IIC }, + { .vendor = OCP_VENDOR_INVALID } +}; + +MODULE_DEVICE_TABLE(ocp, ibm_iic_ids); + +static struct ocp_driver ibm_iic_driver = +{ + .name = "iic", + .id_table = ibm_iic_ids, + .probe = iic_probe, + .remove = __devexit_p(iic_remove), +#if defined(CONFIG_PM) + .suspend = NULL, + .resume = NULL, +#endif +}; + +static int __init iic_init(void) +{ + printk(KERN_INFO "IBM IIC driver v" DRIVER_VERSION "\n"); + return ocp_register_driver(&ibm_iic_driver); +} + +static void __exit iic_exit(void) +{ + ocp_unregister_driver(&ibm_iic_driver); +} + +module_init(iic_init); +module_exit(iic_exit); diff --git a/drivers/i2c/busses/i2c-ibm_iic.h b/drivers/i2c/busses/i2c-ibm_iic.h new file mode 100644 index 00000000000..d819a955d89 --- /dev/null +++ b/drivers/i2c/busses/i2c-ibm_iic.h @@ -0,0 +1,124 @@ +/* + * drivers/i2c/i2c-ibm_iic.h + * + * Support for the IIC peripheral on IBM PPC 4xx + * + * Copyright (c) 2003 Zultys Technologies. + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * + * Based on original work by + * Ian DaSilva <idasilva@mvista.com> + * Armin Kuster <akuster@mvista.com> + * Matt Porter <mporter@mvista.com> + * + * Copyright 2000-2003 MontaVista Software Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ +#ifndef __I2C_IBM_IIC_H_ +#define __I2C_IBM_IIC_H_ + +#include <linux/config.h> +#include <linux/i2c.h> + +struct iic_regs { + u16 mdbuf; + u16 sbbuf; + u8 lmadr; + u8 hmadr; + u8 cntl; + u8 mdcntl; + u8 sts; + u8 extsts; + u8 lsadr; + u8 hsadr; + u8 clkdiv; + u8 intmsk; + u8 xfrcnt; + u8 xtcntlss; + u8 directcntl; +}; + +struct ibm_iic_private { + struct i2c_adapter adap; + volatile struct iic_regs __iomem *vaddr; + wait_queue_head_t wq; + int idx; + int irq; + int fast_mode; + u8 clckdiv; +}; + +/* IICx_CNTL register */ +#define CNTL_HMT 0x80 +#define CNTL_AMD 0x40 +#define CNTL_TCT_MASK 0x30 +#define CNTL_TCT_SHIFT 4 +#define CNTL_RPST 0x08 +#define CNTL_CHT 0x04 +#define CNTL_RW 0x02 +#define CNTL_PT 0x01 + +/* IICx_MDCNTL register */ +#define MDCNTL_FSDB 0x80 +#define MDCNTL_FMDB 0x40 +#define MDCNTL_EGC 0x20 +#define MDCNTL_FSM 0x10 +#define MDCNTL_ESM 0x08 +#define MDCNTL_EINT 0x04 +#define MDCNTL_EUBS 0x02 +#define MDCNTL_HSCL 0x01 + +/* IICx_STS register */ +#define STS_SSS 0x80 +#define STS_SLPR 0x40 +#define STS_MDBS 0x20 +#define STS_MDBF 0x10 +#define STS_SCMP 0x08 +#define STS_ERR 0x04 +#define STS_IRQA 0x02 +#define STS_PT 0x01 + +/* IICx_EXTSTS register */ +#define EXTSTS_IRQP 0x80 +#define EXTSTS_BCS_MASK 0x70 +#define EXTSTS_BCS_FREE 0x40 +#define EXTSTS_IRQD 0x08 +#define EXTSTS_LA 0x04 +#define EXTSTS_ICT 0x02 +#define EXTSTS_XFRA 0x01 + +/* IICx_INTRMSK register */ +#define INTRMSK_EIRC 0x80 +#define INTRMSK_EIRS 0x40 +#define INTRMSK_EIWC 0x20 +#define INTRMSK_EIWS 0x10 +#define INTRMSK_EIHE 0x08 +#define INTRMSK_EIIC 0x04 +#define INTRMSK_EITA 0x02 +#define INTRMSK_EIMTC 0x01 + +/* IICx_XFRCNT register */ +#define XFRCNT_MTC_MASK 0x07 + +/* IICx_XTCNTLSS register */ +#define XTCNTLSS_SRC 0x80 +#define XTCNTLSS_SRS 0x40 +#define XTCNTLSS_SWC 0x20 +#define XTCNTLSS_SWS 0x10 +#define XTCNTLSS_SRST 0x01 + +/* IICx_DIRECTCNTL register */ +#define DIRCNTL_SDAC 0x08 +#define DIRCNTL_SCC 0x04 +#define DIRCNTL_MSDA 0x02 +#define DIRCNTL_MSC 0x01 + +/* Check if we really control the I2C bus and bus is free */ +#define DIRCTNL_FREE(v) (((v) & 0x0f) == 0x0f) + +#endif /* __I2C_IBM_IIC_H_ */ diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c new file mode 100644 index 00000000000..c961ba4cfb3 --- /dev/null +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -0,0 +1,554 @@ +/* ------------------------------------------------------------------------- */ +/* i2c-iop3xx.c i2c driver algorithms for Intel XScale IOP3xx & IXP46x */ +/* ------------------------------------------------------------------------- */ +/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd + * <Peter dot Milne at D hyphen TACQ dot com> + * + * With acknowledgements to i2c-algo-ibm_ocp.c by + * Ian DaSilva, MontaVista Software, Inc. idasilva@mvista.com + * + * And i2c-algo-pcf.c, which was created by Simon G. Vogl and Hans Berglund: + * + * Copyright (C) 1995-1997 Simon G. Vogl, 1998-2000 Hans Berglund + * + * And which acknowledged Kyösti Mälkki <kmalkki@cc.hut.fi>, + * Frodo Looijaard <frodol@dds.nl>, Martin Bailey<mbailey@littlefeet-inc.com> + * + * Major cleanup by Deepak Saxena <dsaxena@plexity.net>, 01/2005: + * + * - Use driver model to pass per-chip info instead of hardcoding and #ifdefs + * - Use ioremap/__raw_readl/__raw_writel instead of direct dereference + * - Make it work with IXP46x chips + * - Cleanup function names, coding style, etc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, version 2. + */ + +#include <linux/config.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/errno.h> +#include <linux/sched.h> +#include <linux/device.h> +#include <linux/i2c.h> + +#include <asm/io.h> + +#include "i2c-iop3xx.h" + +/* global unit counter */ +static int i2c_id = 0; + +static inline unsigned char +iic_cook_addr(struct i2c_msg *msg) +{ + unsigned char addr; + + addr = (msg->addr << 1); + + if (msg->flags & I2C_M_RD) + addr |= 1; + + /* + * Read or Write? + */ + if (msg->flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + + return addr; +} + +static void +iop3xx_i2c_reset(struct i2c_algo_iop3xx_data *iop3xx_adap) +{ + /* Follows devman 9.3 */ + __raw_writel(IOP3XX_ICR_UNIT_RESET, iop3xx_adap->ioaddr + CR_OFFSET); + __raw_writel(IOP3XX_ISR_CLEARBITS, iop3xx_adap->ioaddr + SR_OFFSET); + __raw_writel(0, iop3xx_adap->ioaddr + CR_OFFSET); +} + +static void +iop3xx_i2c_set_slave_addr(struct i2c_algo_iop3xx_data *iop3xx_adap) +{ + __raw_writel(MYSAR, iop3xx_adap->ioaddr + SAR_OFFSET); +} + +static void +iop3xx_i2c_enable(struct i2c_algo_iop3xx_data *iop3xx_adap) +{ + u32 cr = IOP3XX_ICR_GCD | IOP3XX_ICR_SCLEN | IOP3XX_ICR_UE; + + /* + * Everytime unit enable is asserted, GPOD needs to be cleared + * on IOP321 to avoid data corruption on the bus. + */ +#ifdef CONFIG_ARCH_IOP321 +#define IOP321_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */ +#define IOP321_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */ + + *IOP321_GPOD &= (iop3xx_adap->id == 0) ? ~IOP321_GPOD_I2C0 : + ~IOP321_GPOD_I2C1; +#endif + /* NB SR bits not same position as CR IE bits :-( */ + iop3xx_adap->SR_enabled = + IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD | + IOP3XX_ISR_RXFULL | IOP3XX_ISR_TXEMPTY; + + cr |= IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE | + IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE; + + __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); +} + +static void +iop3xx_i2c_transaction_cleanup(struct i2c_algo_iop3xx_data *iop3xx_adap) +{ + unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); + + cr &= ~(IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE | + IOP3XX_ICR_MSTOP | IOP3XX_ICR_SCLEN); + + __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); +} + +/* + * NB: the handler has to clear the source of the interrupt! + * Then it passes the SR flags of interest to BH via adap data + */ +static irqreturn_t +iop3xx_i2c_irq_handler(int this_irq, void *dev_id, struct pt_regs *regs) +{ + struct i2c_algo_iop3xx_data *iop3xx_adap = dev_id; + u32 sr = __raw_readl(iop3xx_adap->ioaddr + SR_OFFSET); + + if ((sr &= iop3xx_adap->SR_enabled)) { + __raw_writel(sr, iop3xx_adap->ioaddr + SR_OFFSET); + iop3xx_adap->SR_received |= sr; + wake_up_interruptible(&iop3xx_adap->waitq); + } + return IRQ_HANDLED; +} + +/* check all error conditions, clear them , report most important */ +static int +iop3xx_i2c_error(u32 sr) +{ + int rc = 0; + + if ((sr & IOP3XX_ISR_BERRD)) { + if ( !rc ) rc = -I2C_ERR_BERR; + } + if ((sr & IOP3XX_ISR_ALD)) { + if ( !rc ) rc = -I2C_ERR_ALD; + } + return rc; +} + +static inline u32 +iop3xx_i2c_get_srstat(struct i2c_algo_iop3xx_data *iop3xx_adap) +{ + unsigned long flags; + u32 sr; + + spin_lock_irqsave(&iop3xx_adap->lock, flags); + sr = iop3xx_adap->SR_received; + iop3xx_adap->SR_received = 0; + spin_unlock_irqrestore(&iop3xx_adap->lock, flags); + + return sr; +} + +/* + * sleep until interrupted, then recover and analyse the SR + * saved by handler + */ +typedef int (* compare_func)(unsigned test, unsigned mask); +/* returns 1 on correct comparison */ + +static int +iop3xx_i2c_wait_event(struct i2c_algo_iop3xx_data *iop3xx_adap, + unsigned flags, unsigned* status, + compare_func compare) +{ + unsigned sr = 0; + int interrupted; + int done; + int rc = 0; + + do { + interrupted = wait_event_interruptible_timeout ( + iop3xx_adap->waitq, + (done = compare( sr = iop3xx_i2c_get_srstat(iop3xx_adap) ,flags )), + 1 * HZ; + ); + if ((rc = iop3xx_i2c_error(sr)) < 0) { + *status = sr; + return rc; + } else if (!interrupted) { + *status = sr; + return -ETIMEDOUT; + } + } while(!done); + + *status = sr; + + return 0; +} + +/* + * Concrete compare_funcs + */ +static int +all_bits_clear(unsigned test, unsigned mask) +{ + return (test & mask) == 0; +} + +static int +any_bits_set(unsigned test, unsigned mask) +{ + return (test & mask) != 0; +} + +static int +iop3xx_i2c_wait_tx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) +{ + return iop3xx_i2c_wait_event( + iop3xx_adap, + IOP3XX_ISR_TXEMPTY | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, + status, any_bits_set); +} + +static int +iop3xx_i2c_wait_rx_done(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) +{ + return iop3xx_i2c_wait_event( + iop3xx_adap, + IOP3XX_ISR_RXFULL | IOP3XX_ISR_ALD | IOP3XX_ISR_BERRD, + status, any_bits_set); +} + +static int +iop3xx_i2c_wait_idle(struct i2c_algo_iop3xx_data *iop3xx_adap, int *status) +{ + return iop3xx_i2c_wait_event( + iop3xx_adap, IOP3XX_ISR_UNITBUSY, status, all_bits_clear); +} + +static int +iop3xx_i2c_send_target_addr(struct i2c_algo_iop3xx_data *iop3xx_adap, + struct i2c_msg* msg) +{ + unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); + int status; + int rc; + + __raw_writel(iic_cook_addr(msg), iop3xx_adap->ioaddr + DBR_OFFSET); + + cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); + cr |= IOP3XX_ICR_MSTART | IOP3XX_ICR_TBYTE; + + __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); + rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); + + return rc; +} + +static int +iop3xx_i2c_write_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char byte, + int stop) +{ + unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); + int status; + int rc = 0; + + __raw_writel(byte, iop3xx_adap->ioaddr + DBR_OFFSET); + cr &= ~IOP3XX_ICR_MSTART; + if (stop) { + cr |= IOP3XX_ICR_MSTOP; + } else { + cr &= ~IOP3XX_ICR_MSTOP; + } + cr |= IOP3XX_ICR_TBYTE; + __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); + rc = iop3xx_i2c_wait_tx_done(iop3xx_adap, &status); + + return rc; +} + +static int +iop3xx_i2c_read_byte(struct i2c_algo_iop3xx_data *iop3xx_adap, char* byte, + int stop) +{ + unsigned long cr = __raw_readl(iop3xx_adap->ioaddr + CR_OFFSET); + int status; + int rc = 0; + + cr &= ~IOP3XX_ICR_MSTART; + + if (stop) { + cr |= IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK; + } else { + cr &= ~(IOP3XX_ICR_MSTOP | IOP3XX_ICR_NACK); + } + cr |= IOP3XX_ICR_TBYTE; + __raw_writel(cr, iop3xx_adap->ioaddr + CR_OFFSET); + + rc = iop3xx_i2c_wait_rx_done(iop3xx_adap, &status); + + *byte = __raw_readl(iop3xx_adap->ioaddr + DBR_OFFSET); + + return rc; +} + +static int +iop3xx_i2c_writebytes(struct i2c_adapter *i2c_adap, const char *buf, int count) +{ + struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; + int ii; + int rc = 0; + + for (ii = 0; rc == 0 && ii != count; ++ii) + rc = iop3xx_i2c_write_byte(iop3xx_adap, buf[ii], ii==count-1); + return rc; +} + +static int +iop3xx_i2c_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count) +{ + struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; + int ii; + int rc = 0; + + for (ii = 0; rc == 0 && ii != count; ++ii) + rc = iop3xx_i2c_read_byte(iop3xx_adap, &buf[ii], ii==count-1); + + return rc; +} + +/* + * Description: This function implements combined transactions. Combined + * transactions consist of combinations of reading and writing blocks of data. + * FROM THE SAME ADDRESS + * Each transfer (i.e. a read or a write) is separated by a repeated start + * condition. + */ +static int +iop3xx_i2c_handle_msg(struct i2c_adapter *i2c_adap, struct i2c_msg* pmsg) +{ + struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; + int rc; + + rc = iop3xx_i2c_send_target_addr(iop3xx_adap, pmsg); + if (rc < 0) { + return rc; + } + + if ((pmsg->flags&I2C_M_RD)) { + return iop3xx_i2c_readbytes(i2c_adap, pmsg->buf, pmsg->len); + } else { + return iop3xx_i2c_writebytes(i2c_adap, pmsg->buf, pmsg->len); + } +} + +/* + * master_xfer() - main read/write entry + */ +static int +iop3xx_i2c_master_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, + int num) +{ + struct i2c_algo_iop3xx_data *iop3xx_adap = i2c_adap->algo_data; + int im = 0; + int ret = 0; + int status; + + iop3xx_i2c_wait_idle(iop3xx_adap, &status); + iop3xx_i2c_reset(iop3xx_adap); + iop3xx_i2c_enable(iop3xx_adap); + + for (im = 0; ret == 0 && im != num; im++) { + ret = iop3xx_i2c_handle_msg(i2c_adap, &msgs[im]); + } + + iop3xx_i2c_transaction_cleanup(iop3xx_adap); + + if(ret) + return ret; + + return im; +} + +static int +iop3xx_i2c_algo_control(struct i2c_adapter *adapter, unsigned int cmd, + unsigned long arg) +{ + return 0; +} + +static u32 +iop3xx_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm iop3xx_i2c_algo = { + .name = "IOP3xx I2C algorithm", + .id = I2C_ALGO_IOP3XX, + .master_xfer = iop3xx_i2c_master_xfer, + .algo_control = iop3xx_i2c_algo_control, + .functionality = iop3xx_i2c_func, +}; + +static int +iop3xx_i2c_remove(struct device *device) +{ + struct platform_device *pdev = to_platform_device(device); + struct i2c_adapter *padapter = dev_get_drvdata(&pdev->dev); + struct i2c_algo_iop3xx_data *adapter_data = + (struct i2c_algo_iop3xx_data *)padapter->algo_data; + struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + unsigned long cr = __raw_readl(adapter_data->ioaddr + CR_OFFSET); + + /* + * Disable the actual HW unit + */ + cr &= ~(IOP3XX_ICR_ALD_IE | IOP3XX_ICR_BERR_IE | + IOP3XX_ICR_RXFULL_IE | IOP3XX_ICR_TXEMPTY_IE); + __raw_writel(cr, adapter_data->ioaddr + CR_OFFSET); + + iounmap((void __iomem*)adapter_data->ioaddr); + release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); + kfree(adapter_data); + kfree(padapter); + + dev_set_drvdata(&pdev->dev, NULL); + + return 0; +} + +static int +iop3xx_i2c_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct resource *res; + int ret; + struct i2c_adapter *new_adapter; + struct i2c_algo_iop3xx_data *adapter_data; + + new_adapter = kmalloc(sizeof(struct i2c_adapter), GFP_KERNEL); + if (!new_adapter) { + ret = -ENOMEM; + goto out; + } + memset((void*)new_adapter, 0, sizeof(*new_adapter)); + + adapter_data = kmalloc(sizeof(struct i2c_algo_iop3xx_data), GFP_KERNEL); + if (!adapter_data) { + ret = -ENOMEM; + goto free_adapter; + } + memset((void*)adapter_data, 0, sizeof(*adapter_data)); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + ret = -ENODEV; + goto free_both; + } + + if (!request_mem_region(res->start, IOP3XX_I2C_IO_SIZE, pdev->name)) { + ret = -EBUSY; + goto free_both; + } + + /* set the adapter enumeration # */ + adapter_data->id = i2c_id++; + + adapter_data->ioaddr = (u32)ioremap(res->start, IOP3XX_I2C_IO_SIZE); + if (!adapter_data->ioaddr) { + ret = -ENOMEM; + goto release_region; + } + + res = request_irq(platform_get_irq(pdev, 0), iop3xx_i2c_irq_handler, 0, + pdev->name, adapter_data); + if (res) { + ret = -EIO; + goto unmap; + } + + memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); + new_adapter->id = I2C_HW_IOP3XX; + new_adapter->owner = THIS_MODULE; + new_adapter->dev.parent = &pdev->dev; + + /* + * Default values...should these come in from board code? + */ + new_adapter->timeout = 100; + new_adapter->retries = 3; + new_adapter->algo = &iop3xx_i2c_algo; + + init_waitqueue_head(&adapter_data->waitq); + spin_lock_init(&adapter_data->lock); + + iop3xx_i2c_reset(adapter_data); + iop3xx_i2c_set_slave_addr(adapter_data); + iop3xx_i2c_enable(adapter_data); + + dev_set_drvdata(&pdev->dev, new_adapter); + new_adapter->algo_data = adapter_data; + + i2c_add_adapter(new_adapter); + + return 0; + +unmap: + iounmap((void __iomem*)adapter_data->ioaddr); + +release_region: + release_mem_region(res->start, IOP3XX_I2C_IO_SIZE); + +free_both: + kfree(adapter_data); + +free_adapter: + kfree(new_adapter); + +out: + return ret; +} + + +static struct device_driver iop3xx_i2c_driver = { + .name = "IOP3xx-I2C", + .bus = &platform_bus_type, + .probe = iop3xx_i2c_probe, + .remove = iop3xx_i2c_remove +}; + +static int __init +i2c_iop3xx_init (void) +{ + return driver_register(&iop3xx_i2c_driver); +} + +static void __exit +i2c_iop3xx_exit (void) +{ + driver_unregister(&iop3xx_i2c_driver); + return; +} + +module_init (i2c_iop3xx_init); +module_exit (i2c_iop3xx_exit); + +MODULE_AUTHOR("D-TACQ Solutions Ltd <www.d-tacq.com>"); +MODULE_DESCRIPTION("IOP3xx iic algorithm and driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h new file mode 100644 index 00000000000..e46ebaea7b1 --- /dev/null +++ b/drivers/i2c/busses/i2c-iop3xx.h @@ -0,0 +1,107 @@ +/* ------------------------------------------------------------------------- */ +/* i2c-iop3xx.h algorithm driver definitions private to i2c-iop3xx.c */ +/* ------------------------------------------------------------------------- */ +/* Copyright (C) 2003 Peter Milne, D-TACQ Solutions Ltd + * <Peter dot Milne at D hyphen TACQ dot com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* ------------------------------------------------------------------------- */ + + +#ifndef I2C_IOP3XX_H +#define I2C_IOP3XX_H 1 + +/* + * iop321 hardware bit definitions + */ +#define IOP3XX_ICR_FAST_MODE 0x8000 /* 1=400kBps, 0=100kBps */ +#define IOP3XX_ICR_UNIT_RESET 0x4000 /* 1=RESET */ +#define IOP3XX_ICR_SAD_IE 0x2000 /* 1=Slave Detect Interrupt Enable */ +#define IOP3XX_ICR_ALD_IE 0x1000 /* 1=Arb Loss Detect Interrupt Enable */ +#define IOP3XX_ICR_SSD_IE 0x0800 /* 1=Slave STOP Detect Interrupt Enable */ +#define IOP3XX_ICR_BERR_IE 0x0400 /* 1=Bus Error Interrupt Enable */ +#define IOP3XX_ICR_RXFULL_IE 0x0200 /* 1=Receive Full Interrupt Enable */ +#define IOP3XX_ICR_TXEMPTY_IE 0x0100 /* 1=Transmit Empty Interrupt Enable */ +#define IOP3XX_ICR_GCD 0x0080 /* 1=General Call Disable */ +/* + * IOP3XX_ICR_GCD: 1 disables response as slave. "This bit must be set + * when sending a master mode general call message from the I2C unit" + */ +#define IOP3XX_ICR_UE 0x0040 /* 1=Unit Enable */ +/* + * "NOTE: To avoid I2C bus integrity problems, + * the user needs to ensure that the GPIO Output Data Register - + * GPOD bits associated with an I2C port are cleared prior to setting + * the enable bit for that I2C serial port. + * The user prepares to enable I2C port 0 and + * I2C port 1 by clearing GPOD bits 7:6 and GPOD bits 5:4, respectively. + */ +#define IOP3XX_ICR_SCLEN 0x0020 /* 1=SCL enable for master mode */ +#define IOP3XX_ICR_MABORT 0x0010 /* 1=Send a STOP with no data + * NB TBYTE must be clear */ +#define IOP3XX_ICR_TBYTE 0x0008 /* 1=Send/Receive a byte. i2c clears */ +#define IOP3XX_ICR_NACK 0x0004 /* 1=reply with NACK */ +#define IOP3XX_ICR_MSTOP 0x0002 /* 1=send a STOP after next data byte */ +#define IOP3XX_ICR_MSTART 0x0001 /* 1=initiate a START */ + + +#define IOP3XX_ISR_BERRD 0x0400 /* 1=BUS ERROR Detected */ +#define IOP3XX_ISR_SAD 0x0200 /* 1=Slave ADdress Detected */ +#define IOP3XX_ISR_GCAD 0x0100 /* 1=General Call Address Detected */ +#define IOP3XX_ISR_RXFULL 0x0080 /* 1=Receive Full */ +#define IOP3XX_ISR_TXEMPTY 0x0040 /* 1=Transmit Empty */ +#define IOP3XX_ISR_ALD 0x0020 /* 1=Arbitration Loss Detected */ +#define IOP3XX_ISR_SSD 0x0010 /* 1=Slave STOP Detected */ +#define IOP3XX_ISR_BBUSY 0x0008 /* 1=Bus BUSY */ +#define IOP3XX_ISR_UNITBUSY 0x0004 /* 1=Unit Busy */ +#define IOP3XX_ISR_NACK 0x0002 /* 1=Unit Rx or Tx a NACK */ +#define IOP3XX_ISR_RXREAD 0x0001 /* 1=READ 0=WRITE (R/W bit of slave addr */ + +#define IOP3XX_ISR_CLEARBITS 0x07f0 + +#define IOP3XX_ISAR_SAMASK 0x007f + +#define IOP3XX_IDBR_MASK 0x00ff + +#define IOP3XX_IBMR_SCL 0x0002 +#define IOP3XX_IBMR_SDA 0x0001 + +#define IOP3XX_GPOD_I2C0 0x00c0 /* clear these bits to enable ch0 */ +#define IOP3XX_GPOD_I2C1 0x0030 /* clear these bits to enable ch1 */ + +#define MYSAR 0x02 /* SWAG a suitable slave address */ + +#define I2C_ERR 321 +#define I2C_ERR_BERR (I2C_ERR+0) +#define I2C_ERR_ALD (I2C_ERR+1) + + +#define CR_OFFSET 0 +#define SR_OFFSET 0x4 +#define SAR_OFFSET 0x8 +#define DBR_OFFSET 0xc +#define CCR_OFFSET 0x10 +#define BMR_OFFSET 0x14 + +#define IOP3XX_I2C_IO_SIZE 0x18 + +struct i2c_algo_iop3xx_data { + u32 ioaddr; + wait_queue_head_t waitq; + spinlock_t lock; + u32 SR_enabled, SR_received; + int id; +}; + +#endif /* I2C_IOP3XX_H */ diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c new file mode 100644 index 00000000000..0f54a2a0afa --- /dev/null +++ b/drivers/i2c/busses/i2c-isa.c @@ -0,0 +1,72 @@ +/* + i2c-isa.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* This implements an i2c algorithm/adapter for ISA bus. Not that this is + on first sight very useful; almost no functionality is preserved. + Except that it makes writing drivers for chips which can be on both + the SMBus and the ISA bus very much easier. See lm78.c for an example + of this. */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/i2c.h> + +static u32 isa_func(struct i2c_adapter *adapter); + +/* This is the actual algorithm we define */ +static struct i2c_algorithm isa_algorithm = { + .name = "ISA bus algorithm", + .id = I2C_ALGO_ISA, + .functionality = isa_func, +}; + +/* There can only be one... */ +static struct i2c_adapter isa_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &isa_algorithm, + .name = "ISA main adapter", +}; + +/* We can't do a thing... */ +static u32 isa_func(struct i2c_adapter *adapter) +{ + return 0; +} + +static int __init i2c_isa_init(void) +{ + return i2c_add_adapter(&isa_adapter); +} + +static void __exit i2c_isa_exit(void) +{ + i2c_del_adapter(&isa_adapter); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_DESCRIPTION("ISA bus access through i2c"); +MODULE_LICENSE("GPL"); + +module_init(i2c_isa_init); +module_exit(i2c_isa_exit); diff --git a/drivers/i2c/busses/i2c-ite.c b/drivers/i2c/busses/i2c-ite.c new file mode 100644 index 00000000000..702e3def1b8 --- /dev/null +++ b/drivers/i2c/busses/i2c-ite.c @@ -0,0 +1,282 @@ +/* + ------------------------------------------------------------------------- + i2c-adap-ite.c i2c-hw access for the IIC peripheral on the ITE MIPS system + ------------------------------------------------------------------------- + Hai-Pao Fan, MontaVista Software, Inc. + hpfan@mvista.com or source@mvista.com + + Copyright 2001 MontaVista Software Inc. + + ---------------------------------------------------------------------------- + This file was highly leveraged from i2c-elektor.c, which was created + by Simon G. Vogl and Hans Berglund: + + + Copyright (C) 1995-97 Simon G. Vogl + 1998-99 Hans Berglund + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* ------------------------------------------------------------------------- */ + +/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even + Frodo Looijaard <frodol@dds.nl> */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/wait.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-ite.h> +#include <linux/i2c-adap-ite.h> +#include "../i2c-ite.h" + +#define DEFAULT_BASE 0x14014030 +#define ITE_IIC_IO_SIZE 0x40 +#define DEFAULT_IRQ 0 +#define DEFAULT_CLOCK 0x1b0e /* default 16MHz/(27+14) = 400KHz */ +#define DEFAULT_OWN 0x55 + +static int base; +static int irq; +static int clock; +static int own; + +static struct iic_ite gpi; +static wait_queue_head_t iic_wait; +static int iic_pending; +static spinlock_t lock; + +/* ----- local functions ---------------------------------------------- */ + +static void iic_ite_setiic(void *data, int ctl, short val) +{ + unsigned long j = jiffies + 10; + + pr_debug(" Write 0x%02x to 0x%x\n",(unsigned short)val, ctl&0xff); +#ifdef DEBUG + while (time_before(jiffies, j)) + schedule(); +#endif + outw(val,ctl); +} + +static short iic_ite_getiic(void *data, int ctl) +{ + short val; + + val = inw(ctl); + pr_debug("Read 0x%02x from 0x%x\n",(unsigned short)val, ctl&0xff); + return (val); +} + +/* Return our slave address. This is the address + * put on the I2C bus when another master on the bus wants to address us + * as a slave + */ +static int iic_ite_getown(void *data) +{ + return (gpi.iic_own); +} + + +static int iic_ite_getclock(void *data) +{ + return (gpi.iic_clock); +} + + +/* Put this process to sleep. We will wake up when the + * IIC controller interrupts. + */ +static void iic_ite_waitforpin(void) { + DEFINE_WAIT(wait); + int timeout = 2; + long flags; + + /* If interrupts are enabled (which they are), then put the process to + * sleep. This process will be awakened by two events -- either the + * the IIC peripheral interrupts or the timeout expires. + * If interrupts are not enabled then delay for a reasonable amount + * of time and return. + */ + if (gpi.iic_irq > 0) { + spin_lock_irqsave(&lock, flags); + if (iic_pending == 0) { + spin_unlock_irqrestore(&lock, flags); + prepare_to_wait(&iic_wait, &wait, TASK_INTERRUPTIBLE); + if (schedule_timeout(timeout*HZ)) { + spin_lock_irqsave(&lock, flags); + if (iic_pending == 1) { + iic_pending = 0; + } + spin_unlock_irqrestore(&lock, flags); + } + finish_wait(&iic_wait, &wait); + } else { + iic_pending = 0; + spin_unlock_irqrestore(&lock, flags); + } + } else { + udelay(100); + } +} + + +static irqreturn_t iic_ite_handler(int this_irq, void *dev_id, + struct pt_regs *regs) +{ + spin_lock(&lock); + iic_pending = 1; + spin_unlock(&lock); + + wake_up_interruptible(&iic_wait); + + return IRQ_HANDLED; +} + + +/* Lock the region of memory where I/O registers exist. Request our + * interrupt line and register its associated handler. + */ +static int iic_hw_resrc_init(void) +{ + if (!request_region(gpi.iic_base, ITE_IIC_IO_SIZE, "i2c")) + return -ENODEV; + + if (gpi.iic_irq <= 0) + return 0; + + if (request_irq(gpi.iic_irq, iic_ite_handler, 0, "ITE IIC", 0) < 0) + gpi.iic_irq = 0; + else + enable_irq(gpi.iic_irq); + + return 0; +} + + +static void iic_ite_release(void) +{ + if (gpi.iic_irq > 0) { + disable_irq(gpi.iic_irq); + free_irq(gpi.iic_irq, 0); + } + release_region(gpi.iic_base , 2); +} + +/* ------------------------------------------------------------------------ + * Encapsulate the above functions in the correct operations structure. + * This is only done when more than one hardware adapter is supported. + */ +static struct i2c_algo_iic_data iic_ite_data = { + NULL, + iic_ite_setiic, + iic_ite_getiic, + iic_ite_getown, + iic_ite_getclock, + iic_ite_waitforpin, + 80, 80, 100, /* waits, timeout */ +}; + +static struct i2c_adapter iic_ite_ops = { + .owner = THIS_MODULE, + .id = I2C_HW_I_IIC, + .algo_data = &iic_ite_data, + .dev = { + .name = "ITE IIC adapter", + }, +}; + +/* Called when the module is loaded. This function starts the + * cascade of calls up through the hierarchy of i2c modules (i.e. up to the + * algorithm layer and into to the core layer) + */ +static int __init iic_ite_init(void) +{ + + struct iic_ite *piic = &gpi; + + printk(KERN_INFO "Initialize ITE IIC adapter module\n"); + if (base == 0) + piic->iic_base = DEFAULT_BASE; + else + piic->iic_base = base; + + if (irq == 0) + piic->iic_irq = DEFAULT_IRQ; + else + piic->iic_irq = irq; + + if (clock == 0) + piic->iic_clock = DEFAULT_CLOCK; + else + piic->iic_clock = clock; + + if (own == 0) + piic->iic_own = DEFAULT_OWN; + else + piic->iic_own = own; + + iic_ite_data.data = (void *)piic; + init_waitqueue_head(&iic_wait); + spin_lock_init(&lock); + if (iic_hw_resrc_init() == 0) { + if (i2c_iic_add_bus(&iic_ite_ops) < 0) + return -ENODEV; + } else { + return -ENODEV; + } + printk(KERN_INFO " found device at %#x irq %d.\n", + piic->iic_base, piic->iic_irq); + return 0; +} + + +static void iic_ite_exit(void) +{ + i2c_iic_del_bus(&iic_ite_ops); + iic_ite_release(); +} + +/* If modules is NOT defined when this file is compiled, then the MODULE_* + * macros will resolve to nothing + */ +MODULE_AUTHOR("MontaVista Software <www.mvista.com>"); +MODULE_DESCRIPTION("I2C-Bus adapter routines for ITE IIC bus adapter"); +MODULE_LICENSE("GPL"); + +module_param(base, int, 0); +module_param(irq, int, 0); +module_param(clock, int, 0); +module_param(own, int, 0); + + +/* Called when module is loaded or when kernel is initialized. + * If MODULES is defined when this file is compiled, then this function will + * resolve to init_module (the function called when insmod is invoked for a + * module). Otherwise, this function is called early in the boot, when the + * kernel is intialized. Check out /include/init.h to see how this works. + */ +module_init(iic_ite_init); + +/* Resolves to module_cleanup when MODULES is defined. */ +module_exit(iic_ite_exit); diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c new file mode 100644 index 00000000000..21cd54d0230 --- /dev/null +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -0,0 +1,171 @@ +/* + * drivers/i2c/busses/i2c-ixp2000.c + * + * I2C adapter for IXP2000 systems using GPIOs for I2C bus + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * Based on IXDP2400 code by: Naeem M. Afzal <naeem.m.afzal@intel.com> + * Made generic by: Jeff Daly <jeffrey.daly@intel.com> + * + * Copyright (c) 2003-2004 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * From Jeff Daly: + * + * I2C adapter driver for Intel IXDP2xxx platforms. This should work for any + * IXP2000 platform if it uses the HW GPIO in the same manner. Basically, + * SDA and SCL GPIOs have external pullups. Setting the respective GPIO to + * an input will make the signal a '1' via the pullup. Setting them to + * outputs will pull them down. + * + * The GPIOs are open drain signals and are used as configuration strap inputs + * during power-up so there's generally a buffer on the board that needs to be + * 'enabled' to drive the GPIOs. + */ + +#include <linux/config.h> +#ifdef CONFIG_I2C_DEBUG_BUS +#define DEBUG 1 +#endif + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> + +#include <asm/hardware.h> /* Pick up IXP42000-specific bits */ + +static inline int ixp2000_scl_pin(void *data) +{ + return ((struct ixp2000_i2c_pins*)data)->scl_pin; +} + +static inline int ixp2000_sda_pin(void *data) +{ + return ((struct ixp2000_i2c_pins*)data)->sda_pin; +} + + +static void ixp2000_bit_setscl(void *data, int val) +{ + int i = 5000; + + if (val) { + gpio_line_config(ixp2000_scl_pin(data), GPIO_IN); + while(!gpio_line_get(ixp2000_scl_pin(data)) && i--); + } else { + gpio_line_config(ixp2000_scl_pin(data), GPIO_OUT); + } +} + +static void ixp2000_bit_setsda(void *data, int val) +{ + if (val) { + gpio_line_config(ixp2000_sda_pin(data), GPIO_IN); + } else { + gpio_line_config(ixp2000_sda_pin(data), GPIO_OUT); + } +} + +static int ixp2000_bit_getscl(void *data) +{ + return gpio_line_get(ixp2000_scl_pin(data)); +} + +static int ixp2000_bit_getsda(void *data) +{ + return gpio_line_get(ixp2000_sda_pin(data)); +} + +struct ixp2000_i2c_data { + struct ixp2000_i2c_pins *gpio_pins; + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo_data; +}; + +static int ixp2000_i2c_remove(struct device *dev) +{ + struct platform_device *plat_dev = to_platform_device(dev); + struct ixp2000_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev); + + dev_set_drvdata(&plat_dev->dev, NULL); + + i2c_bit_del_bus(&drv_data->adapter); + + kfree(drv_data); + + return 0; +} + +static int ixp2000_i2c_probe(struct device *dev) +{ + int err; + struct platform_device *plat_dev = to_platform_device(dev); + struct ixp2000_i2c_pins *gpio = plat_dev->dev.platform_data; + struct ixp2000_i2c_data *drv_data = + kmalloc(sizeof(struct ixp2000_i2c_data), GFP_KERNEL); + + if (!drv_data) + return -ENOMEM; + memzero(drv_data, sizeof(*drv_data)); + drv_data->gpio_pins = gpio; + + drv_data->algo_data.data = gpio; + drv_data->algo_data.setsda = ixp2000_bit_setsda; + drv_data->algo_data.setscl = ixp2000_bit_setscl; + drv_data->algo_data.getsda = ixp2000_bit_getsda; + drv_data->algo_data.getscl = ixp2000_bit_getscl; + drv_data->algo_data.udelay = 6; + drv_data->algo_data.mdelay = 6; + drv_data->algo_data.timeout = 100; + + drv_data->adapter.id = I2C_HW_B_IXP2000, + drv_data->adapter.algo_data = &drv_data->algo_data, + + drv_data->adapter.dev.parent = &plat_dev->dev; + + gpio_line_config(gpio->sda_pin, GPIO_IN); + gpio_line_config(gpio->scl_pin, GPIO_IN); + gpio_line_set(gpio->scl_pin, 0); + gpio_line_set(gpio->sda_pin, 0); + + if ((err = i2c_bit_add_bus(&drv_data->adapter)) != 0) { + dev_err(dev, "Could not install, error %d\n", err); + kfree(drv_data); + return err; + } + + dev_set_drvdata(&plat_dev->dev, drv_data); + + return 0; +} + +static struct device_driver ixp2000_i2c_driver = { + .name = "IXP2000-I2C", + .bus = &platform_bus_type, + .probe = ixp2000_i2c_probe, + .remove = ixp2000_i2c_remove, +}; + +static int __init ixp2000_i2c_init(void) +{ + return driver_register(&ixp2000_i2c_driver); +} + +static void __exit ixp2000_i2c_exit(void) +{ + driver_unregister(&ixp2000_i2c_driver); +} + +module_init(ixp2000_i2c_init); +module_exit(ixp2000_i2c_exit); + +MODULE_AUTHOR ("Deepak Saxena <dsaxena@plexity.net>"); +MODULE_DESCRIPTION("IXP2000 GPIO-based I2C bus driver"); +MODULE_LICENSE("GPL"); + diff --git a/drivers/i2c/busses/i2c-ixp4xx.c b/drivers/i2c/busses/i2c-ixp4xx.c new file mode 100644 index 00000000000..8c55eafc3a0 --- /dev/null +++ b/drivers/i2c/busses/i2c-ixp4xx.c @@ -0,0 +1,181 @@ +/* + * drivers/i2c/i2c-adap-ixp4xx.c + * + * Intel's IXP4xx XScale NPU chipsets (IXP420, 421, 422, 425) do not have + * an on board I2C controller but provide 16 GPIO pins that are often + * used to create an I2C bus. This driver provides an i2c_adapter + * interface that plugs in under algo_bit and drives the GPIO pins + * as instructed by the alogorithm driver. + * + * Author: Deepak Saxena <dsaxena@plexity.net> + * + * Copyright (c) 2003-2004 MontaVista Software Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * NOTE: Since different platforms will use different GPIO pins for + * I2C, this driver uses an IXP4xx-specific platform_data + * pointer to pass the GPIO numbers to the driver. This + * allows us to support all the different IXP4xx platforms + * w/o having to put #ifdefs in this driver. + * + * See arch/arm/mach-ixp4xx/ixdp425.c for an example of building a + * device list and filling in the ixp4xx_i2c_pins data structure + * that is passed as the platform_data to this driver. + */ + +#include <linux/config.h> +#ifdef CONFIG_I2C_DEBUG_BUS +#define DEBUG 1 +#endif + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> + +#include <asm/hardware.h> /* Pick up IXP4xx-specific bits */ + +static inline int ixp4xx_scl_pin(void *data) +{ + return ((struct ixp4xx_i2c_pins*)data)->scl_pin; +} + +static inline int ixp4xx_sda_pin(void *data) +{ + return ((struct ixp4xx_i2c_pins*)data)->sda_pin; +} + +static void ixp4xx_bit_setscl(void *data, int val) +{ + gpio_line_set(ixp4xx_scl_pin(data), 0); + gpio_line_config(ixp4xx_scl_pin(data), + val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT ); +} + +static void ixp4xx_bit_setsda(void *data, int val) +{ + gpio_line_set(ixp4xx_sda_pin(data), 0); + gpio_line_config(ixp4xx_sda_pin(data), + val ? IXP4XX_GPIO_IN : IXP4XX_GPIO_OUT ); +} + +static int ixp4xx_bit_getscl(void *data) +{ + int scl; + + gpio_line_config(ixp4xx_scl_pin(data), IXP4XX_GPIO_IN ); + gpio_line_get(ixp4xx_scl_pin(data), &scl); + + return scl; +} + +static int ixp4xx_bit_getsda(void *data) +{ + int sda; + + gpio_line_config(ixp4xx_sda_pin(data), IXP4XX_GPIO_IN ); + gpio_line_get(ixp4xx_sda_pin(data), &sda); + + return sda; +} + +struct ixp4xx_i2c_data { + struct ixp4xx_i2c_pins *gpio_pins; + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo_data; +}; + +static int ixp4xx_i2c_remove(struct device *dev) +{ + struct platform_device *plat_dev = to_platform_device(dev); + struct ixp4xx_i2c_data *drv_data = dev_get_drvdata(&plat_dev->dev); + + dev_set_drvdata(&plat_dev->dev, NULL); + + i2c_bit_del_bus(&drv_data->adapter); + + kfree(drv_data); + + return 0; +} + +static int ixp4xx_i2c_probe(struct device *dev) +{ + int err; + struct platform_device *plat_dev = to_platform_device(dev); + struct ixp4xx_i2c_pins *gpio = plat_dev->dev.platform_data; + struct ixp4xx_i2c_data *drv_data = + kmalloc(sizeof(struct ixp4xx_i2c_data), GFP_KERNEL); + + if(!drv_data) + return -ENOMEM; + + memzero(drv_data, sizeof(struct ixp4xx_i2c_data)); + drv_data->gpio_pins = gpio; + + /* + * We could make a lot of these structures static, but + * certain platforms may have multiple GPIO-based I2C + * buses for various device domains, so we need per-device + * algo_data->data. + */ + drv_data->algo_data.data = gpio; + drv_data->algo_data.setsda = ixp4xx_bit_setsda; + drv_data->algo_data.setscl = ixp4xx_bit_setscl; + drv_data->algo_data.getsda = ixp4xx_bit_getsda; + drv_data->algo_data.getscl = ixp4xx_bit_getscl; + drv_data->algo_data.udelay = 10; + drv_data->algo_data.mdelay = 10; + drv_data->algo_data.timeout = 100; + + drv_data->adapter.id = I2C_HW_B_IXP4XX; + drv_data->adapter.algo_data = &drv_data->algo_data; + + drv_data->adapter.dev.parent = &plat_dev->dev; + + gpio_line_config(gpio->scl_pin, IXP4XX_GPIO_IN); + gpio_line_config(gpio->sda_pin, IXP4XX_GPIO_IN); + gpio_line_set(gpio->scl_pin, 0); + gpio_line_set(gpio->sda_pin, 0); + + if ((err = i2c_bit_add_bus(&drv_data->adapter) != 0)) { + printk(KERN_ERR "ERROR: Could not install %s\n", dev->bus_id); + + kfree(drv_data); + return err; + } + + dev_set_drvdata(&plat_dev->dev, drv_data); + + return 0; +} + +static struct device_driver ixp4xx_i2c_driver = { + .name = "IXP4XX-I2C", + .bus = &platform_bus_type, + .probe = ixp4xx_i2c_probe, + .remove = ixp4xx_i2c_remove, +}; + +static int __init ixp4xx_i2c_init(void) +{ + return driver_register(&ixp4xx_i2c_driver); +} + +static void __exit ixp4xx_i2c_exit(void) +{ + driver_unregister(&ixp4xx_i2c_driver); +} + +module_init(ixp4xx_i2c_init); +module_exit(ixp4xx_i2c_exit); + +MODULE_DESCRIPTION("GPIO-based I2C adapter for IXP4xx systems"); +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Deepak Saxena <dsaxena@plexity.net>"); + diff --git a/drivers/i2c/busses/i2c-keywest.c b/drivers/i2c/busses/i2c-keywest.c new file mode 100644 index 00000000000..dd0d4c46314 --- /dev/null +++ b/drivers/i2c/busses/i2c-keywest.c @@ -0,0 +1,763 @@ +/* + i2c Support for Apple Keywest I2C Bus Controller + + Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org> + + Original work by + + Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + Changes: + + 2001/12/13 BenH New implementation + 2001/12/15 BenH Add support for "byte" and "quick" + transfers. Add i2c_xfer routine. + 2003/09/21 BenH Rework state machine with Paulus help + 2004/01/21 BenH Merge in Greg KH changes, polled mode is back + 2004/02/05 BenH Merge 64 bits fixes from the g5 ppc64 tree + + My understanding of the various modes supported by keywest are: + + - Dumb mode : not implemented, probably direct tweaking of lines + - Standard mode : simple i2c transaction of type + S Addr R/W A Data A Data ... T + - Standard sub mode : combined 8 bit subaddr write with data read + S Addr R/W A SubAddr A Data A Data ... T + - Combined mode : Subaddress and Data sequences appended with no stop + S Addr R/W A SubAddr S Addr R/W A Data A Data ... T + + Currently, this driver uses only Standard mode for i2c xfer, and + smbus byte & quick transfers ; and uses StandardSub mode for + other smbus transfers instead of combined as we need that for the + sound driver to be happy +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/pci.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/timer.h> +#include <linux/spinlock.h> +#include <linux/completion.h> +#include <linux/interrupt.h> + +#include <asm/io.h> +#include <asm/prom.h> +#include <asm/machdep.h> +#include <asm/pmac_feature.h> +#include <asm/pmac_low_i2c.h> + +#include "i2c-keywest.h" + +#undef POLLED_MODE + +/* Some debug macros */ +#define WRONG_STATE(name) do {\ + pr_debug("KW: wrong state. Got %s, state: %s (isr: %02x)\n", \ + name, __kw_state_names[iface->state], isr); \ + } while(0) + +#ifdef DEBUG +static const char *__kw_state_names[] = { + "state_idle", + "state_addr", + "state_read", + "state_write", + "state_stop", + "state_dead" +}; +#endif /* DEBUG */ + +static int probe; + +MODULE_AUTHOR("Benjamin Herrenschmidt <benh@kernel.crashing.org>"); +MODULE_DESCRIPTION("I2C driver for Apple's Keywest"); +MODULE_LICENSE("GPL"); +module_param(probe, bool, 0); + +#ifdef POLLED_MODE +/* Don't schedule, the g5 fan controller is too + * timing sensitive + */ +static u8 +wait_interrupt(struct keywest_iface* iface) +{ + int i; + u8 isr; + + for (i = 0; i < 200000; i++) { + isr = read_reg(reg_isr) & KW_I2C_IRQ_MASK; + if (isr != 0) + return isr; + udelay(10); + } + return isr; +} +#endif /* POLLED_MODE */ + +static void +do_stop(struct keywest_iface* iface, int result) +{ + write_reg(reg_control, KW_I2C_CTL_STOP); + iface->state = state_stop; + iface->result = result; +} + +/* Main state machine for standard & standard sub mode */ +static void +handle_interrupt(struct keywest_iface *iface, u8 isr) +{ + int ack; + + if (isr == 0) { + if (iface->state != state_stop) { + pr_debug("KW: Timeout !\n"); + do_stop(iface, -EIO); + } + if (iface->state == state_stop) { + ack = read_reg(reg_status); + if (!(ack & KW_I2C_STAT_BUSY)) { + iface->state = state_idle; + write_reg(reg_ier, 0x00); +#ifndef POLLED_MODE + complete(&iface->complete); +#endif /* POLLED_MODE */ + } + } + return; + } + + if (isr & KW_I2C_IRQ_ADDR) { + ack = read_reg(reg_status); + if (iface->state != state_addr) { + write_reg(reg_isr, KW_I2C_IRQ_ADDR); + WRONG_STATE("KW_I2C_IRQ_ADDR"); + do_stop(iface, -EIO); + return; + } + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + iface->state = state_stop; + iface->result = -ENODEV; + pr_debug("KW: NAK on address\n"); + } else { + /* Handle rw "quick" mode */ + if (iface->datalen == 0) { + do_stop(iface, 0); + } else if (iface->read_write == I2C_SMBUS_READ) { + iface->state = state_read; + if (iface->datalen > 1) + write_reg(reg_control, KW_I2C_CTL_AAK); + } else { + iface->state = state_write; + write_reg(reg_data, *(iface->data++)); + iface->datalen--; + } + } + write_reg(reg_isr, KW_I2C_IRQ_ADDR); + } + + if (isr & KW_I2C_IRQ_DATA) { + if (iface->state == state_read) { + *(iface->data++) = read_reg(reg_data); + write_reg(reg_isr, KW_I2C_IRQ_DATA); + iface->datalen--; + if (iface->datalen == 0) + iface->state = state_stop; + else if (iface->datalen == 1) + write_reg(reg_control, 0); + } else if (iface->state == state_write) { + /* Check ack status */ + ack = read_reg(reg_status); + if ((ack & KW_I2C_STAT_LAST_AAK) == 0) { + pr_debug("KW: nack on data write (%x): %x\n", + iface->data[-1], ack); + do_stop(iface, -EIO); + } else if (iface->datalen) { + write_reg(reg_data, *(iface->data++)); + iface->datalen--; + } else { + write_reg(reg_control, KW_I2C_CTL_STOP); + iface->state = state_stop; + iface->result = 0; + } + write_reg(reg_isr, KW_I2C_IRQ_DATA); + } else { + write_reg(reg_isr, KW_I2C_IRQ_DATA); + WRONG_STATE("KW_I2C_IRQ_DATA"); + if (iface->state != state_stop) + do_stop(iface, -EIO); + } + } + + if (isr & KW_I2C_IRQ_STOP) { + write_reg(reg_isr, KW_I2C_IRQ_STOP); + if (iface->state != state_stop) { + WRONG_STATE("KW_I2C_IRQ_STOP"); + iface->result = -EIO; + } + iface->state = state_idle; + write_reg(reg_ier, 0x00); +#ifndef POLLED_MODE + complete(&iface->complete); +#endif /* POLLED_MODE */ + } + + if (isr & KW_I2C_IRQ_START) + write_reg(reg_isr, KW_I2C_IRQ_START); +} + +#ifndef POLLED_MODE + +/* Interrupt handler */ +static irqreturn_t +keywest_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct keywest_iface *iface = (struct keywest_iface *)dev_id; + unsigned long flags; + + spin_lock_irqsave(&iface->lock, flags); + del_timer(&iface->timeout_timer); + handle_interrupt(iface, read_reg(reg_isr)); + if (iface->state != state_idle) { + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); + } + spin_unlock_irqrestore(&iface->lock, flags); + return IRQ_HANDLED; +} + +static void +keywest_timeout(unsigned long data) +{ + struct keywest_iface *iface = (struct keywest_iface *)data; + unsigned long flags; + + pr_debug("timeout !\n"); + spin_lock_irqsave(&iface->lock, flags); + handle_interrupt(iface, read_reg(reg_isr)); + if (iface->state != state_idle) { + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); + } + spin_unlock_irqrestore(&iface->lock, flags); +} + +#endif /* POLLED_MODE */ + +/* + * SMBUS-type transfer entrypoint + */ +static s32 +keywest_smbus_xfer( struct i2c_adapter* adap, + u16 addr, + unsigned short flags, + char read_write, + u8 command, + int size, + union i2c_smbus_data* data) +{ + struct keywest_chan* chan = i2c_get_adapdata(adap); + struct keywest_iface* iface = chan->iface; + int len; + u8* buffer; + u16 cur_word; + int rc = 0; + + if (iface->state == state_dead) + return -ENXIO; + + /* Prepare datas & select mode */ + iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK; + switch (size) { + case I2C_SMBUS_QUICK: + len = 0; + buffer = NULL; + iface->cur_mode |= KW_I2C_MODE_STANDARD; + break; + case I2C_SMBUS_BYTE: + len = 1; + buffer = &data->byte; + iface->cur_mode |= KW_I2C_MODE_STANDARD; + break; + case I2C_SMBUS_BYTE_DATA: + len = 1; + buffer = &data->byte; + iface->cur_mode |= KW_I2C_MODE_STANDARDSUB; + break; + case I2C_SMBUS_WORD_DATA: + len = 2; + cur_word = cpu_to_le16(data->word); + buffer = (u8 *)&cur_word; + iface->cur_mode |= KW_I2C_MODE_STANDARDSUB; + break; + case I2C_SMBUS_BLOCK_DATA: + len = data->block[0]; + buffer = &data->block[1]; + iface->cur_mode |= KW_I2C_MODE_STANDARDSUB; + break; + default: + return -1; + } + + /* Turn a standardsub read into a combined mode access */ + if (read_write == I2C_SMBUS_READ + && (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB) { + iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK; + iface->cur_mode |= KW_I2C_MODE_COMBINED; + } + + /* Original driver had this limitation */ + if (len > 32) + len = 32; + + if (pmac_low_i2c_lock(iface->node)) + return -ENXIO; + + pr_debug("chan: %d, addr: 0x%x, transfer len: %d, read: %d\n", + chan->chan_no, addr, len, read_write == I2C_SMBUS_READ); + + iface->data = buffer; + iface->datalen = len; + iface->state = state_addr; + iface->result = 0; + iface->read_write = read_write; + + /* Setup channel & clear pending irqs */ + write_reg(reg_isr, read_reg(reg_isr)); + write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4)); + write_reg(reg_status, 0); + + /* Set up address and r/w bit */ + write_reg(reg_addr, + (addr << 1) | ((read_write == I2C_SMBUS_READ) ? 0x01 : 0x00)); + + /* Set up the sub address */ + if ((iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_STANDARDSUB + || (iface->cur_mode & KW_I2C_MODE_MODE_MASK) == KW_I2C_MODE_COMBINED) + write_reg(reg_subaddr, command); + +#ifndef POLLED_MODE + /* Arm timeout */ + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); +#endif + + /* Start sending address & enable interrupt*/ + write_reg(reg_control, KW_I2C_CTL_XADDR); + write_reg(reg_ier, KW_I2C_IRQ_MASK); + +#ifdef POLLED_MODE + pr_debug("using polled mode...\n"); + /* State machine, to turn into an interrupt handler */ + while(iface->state != state_idle) { + unsigned long flags; + + u8 isr = wait_interrupt(iface); + spin_lock_irqsave(&iface->lock, flags); + handle_interrupt(iface, isr); + spin_unlock_irqrestore(&iface->lock, flags); + } +#else /* POLLED_MODE */ + pr_debug("using interrupt mode...\n"); + wait_for_completion(&iface->complete); +#endif /* POLLED_MODE */ + + rc = iface->result; + pr_debug("transfer done, result: %d\n", rc); + + if (rc == 0 && size == I2C_SMBUS_WORD_DATA && read_write == I2C_SMBUS_READ) + data->word = le16_to_cpu(cur_word); + + /* Release sem */ + pmac_low_i2c_unlock(iface->node); + + return rc; +} + +/* + * Generic i2c master transfer entrypoint + */ +static int +keywest_xfer( struct i2c_adapter *adap, + struct i2c_msg *msgs, + int num) +{ + struct keywest_chan* chan = i2c_get_adapdata(adap); + struct keywest_iface* iface = chan->iface; + struct i2c_msg *pmsg; + int i, completed; + int rc = 0; + + if (iface->state == state_dead) + return -ENXIO; + + if (pmac_low_i2c_lock(iface->node)) + return -ENXIO; + + /* Set adapter to standard mode */ + iface->cur_mode &= ~KW_I2C_MODE_MODE_MASK; + iface->cur_mode |= KW_I2C_MODE_STANDARD; + + completed = 0; + for (i = 0; rc >= 0 && i < num;) { + u8 addr; + + pmsg = &msgs[i++]; + addr = pmsg->addr; + if (pmsg->flags & I2C_M_TEN) { + printk(KERN_ERR "i2c-keywest: 10 bits addr not supported !\n"); + rc = -EINVAL; + break; + } + pr_debug("xfer: chan: %d, doing %s %d bytes to 0x%02x - %d of %d messages\n", + chan->chan_no, + pmsg->flags & I2C_M_RD ? "read" : "write", + pmsg->len, addr, i, num); + + /* Setup channel & clear pending irqs */ + write_reg(reg_mode, iface->cur_mode | (chan->chan_no << 4)); + write_reg(reg_isr, read_reg(reg_isr)); + write_reg(reg_status, 0); + + iface->data = pmsg->buf; + iface->datalen = pmsg->len; + iface->state = state_addr; + iface->result = 0; + if (pmsg->flags & I2C_M_RD) + iface->read_write = I2C_SMBUS_READ; + else + iface->read_write = I2C_SMBUS_WRITE; + + /* Set up address and r/w bit */ + if (pmsg->flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + write_reg(reg_addr, + (addr << 1) | + ((iface->read_write == I2C_SMBUS_READ) ? 0x01 : 0x00)); + +#ifndef POLLED_MODE + /* Arm timeout */ + iface->timeout_timer.expires = jiffies + POLL_TIMEOUT; + add_timer(&iface->timeout_timer); +#endif + + /* Start sending address & enable interrupt*/ + write_reg(reg_ier, KW_I2C_IRQ_MASK); + write_reg(reg_control, KW_I2C_CTL_XADDR); + +#ifdef POLLED_MODE + pr_debug("using polled mode...\n"); + /* State machine, to turn into an interrupt handler */ + while(iface->state != state_idle) { + u8 isr = wait_interrupt(iface); + handle_interrupt(iface, isr); + } +#else /* POLLED_MODE */ + pr_debug("using interrupt mode...\n"); + wait_for_completion(&iface->complete); +#endif /* POLLED_MODE */ + + rc = iface->result; + if (rc == 0) + completed++; + pr_debug("transfer done, result: %d\n", rc); + } + + /* Release sem */ + pmac_low_i2c_unlock(iface->node); + + return completed; +} + +static u32 +keywest_func(struct i2c_adapter * adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +/* For now, we only handle combined mode (smbus) */ +static struct i2c_algorithm keywest_algorithm = { + .name = "Keywest i2c", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = keywest_smbus_xfer, + .master_xfer = keywest_xfer, + .functionality = keywest_func, +}; + + +static int +create_iface(struct device_node *np, struct device *dev) +{ + unsigned long steps; + unsigned bsteps, tsize, i, nchan, addroffset; + struct keywest_iface* iface; + u32 *psteps, *prate; + int rc; + + if (pmac_low_i2c_lock(np)) + return -ENODEV; + + psteps = (u32 *)get_property(np, "AAPL,address-step", NULL); + steps = psteps ? (*psteps) : 0x10; + + /* Hrm... maybe we can be smarter here */ + for (bsteps = 0; (steps & 0x01) == 0; bsteps++) + steps >>= 1; + + if (np->parent->name[0] == 'u') { + nchan = 2; + addroffset = 3; + } else { + addroffset = 0; + nchan = 1; + } + + tsize = sizeof(struct keywest_iface) + + (sizeof(struct keywest_chan) + 4) * nchan; + iface = (struct keywest_iface *) kmalloc(tsize, GFP_KERNEL); + if (iface == NULL) { + printk(KERN_ERR "i2c-keywest: can't allocate inteface !\n"); + pmac_low_i2c_unlock(np); + return -ENOMEM; + } + memset(iface, 0, tsize); + spin_lock_init(&iface->lock); + init_completion(&iface->complete); + iface->node = of_node_get(np); + iface->bsteps = bsteps; + iface->chan_count = nchan; + iface->state = state_idle; + iface->irq = np->intrs[0].line; + iface->channels = (struct keywest_chan *) + (((unsigned long)(iface + 1) + 3UL) & ~3UL); + iface->base = ioremap(np->addrs[0].address + addroffset, + np->addrs[0].size); + if (!iface->base) { + printk(KERN_ERR "i2c-keywest: can't map inteface !\n"); + kfree(iface); + pmac_low_i2c_unlock(np); + return -ENOMEM; + } + +#ifndef POLLED_MODE + init_timer(&iface->timeout_timer); + iface->timeout_timer.function = keywest_timeout; + iface->timeout_timer.data = (unsigned long)iface; +#endif + + /* Select interface rate */ + iface->cur_mode = KW_I2C_MODE_100KHZ; + prate = (u32 *)get_property(np, "AAPL,i2c-rate", NULL); + if (prate) switch(*prate) { + case 100: + iface->cur_mode = KW_I2C_MODE_100KHZ; + break; + case 50: + iface->cur_mode = KW_I2C_MODE_50KHZ; + break; + case 25: + iface->cur_mode = KW_I2C_MODE_25KHZ; + break; + default: + printk(KERN_WARNING "i2c-keywest: unknown rate %ldKhz, using 100KHz\n", + (long)*prate); + } + + /* Select standard mode by default */ + iface->cur_mode |= KW_I2C_MODE_STANDARD; + + /* Write mode */ + write_reg(reg_mode, iface->cur_mode); + + /* Switch interrupts off & clear them*/ + write_reg(reg_ier, 0x00); + write_reg(reg_isr, KW_I2C_IRQ_MASK); + +#ifndef POLLED_MODE + /* Request chip interrupt */ + rc = request_irq(iface->irq, keywest_irq, SA_INTERRUPT, "keywest i2c", iface); + if (rc) { + printk(KERN_ERR "i2c-keywest: can't get IRQ %d !\n", iface->irq); + iounmap(iface->base); + kfree(iface); + pmac_low_i2c_unlock(np); + return -ENODEV; + } +#endif /* POLLED_MODE */ + + pmac_low_i2c_unlock(np); + dev_set_drvdata(dev, iface); + + for (i=0; i<nchan; i++) { + struct keywest_chan* chan = &iface->channels[i]; + u8 addr; + + sprintf(chan->adapter.name, "%s %d", np->parent->name, i); + chan->iface = iface; + chan->chan_no = i; + chan->adapter.id = I2C_ALGO_SMBUS; + chan->adapter.algo = &keywest_algorithm; + chan->adapter.algo_data = NULL; + chan->adapter.client_register = NULL; + chan->adapter.client_unregister = NULL; + i2c_set_adapdata(&chan->adapter, chan); + chan->adapter.dev.parent = dev; + + rc = i2c_add_adapter(&chan->adapter); + if (rc) { + printk("i2c-keywest.c: Adapter %s registration failed\n", + chan->adapter.name); + i2c_set_adapdata(&chan->adapter, NULL); + } + if (probe) { + printk("Probe: "); + for (addr = 0x00; addr <= 0x7f; addr++) { + if (i2c_smbus_xfer(&chan->adapter,addr, + 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0) + printk("%02x ", addr); + } + printk("\n"); + } + } + + printk(KERN_INFO "Found KeyWest i2c on \"%s\", %d channel%s, stepping: %d bits\n", + np->parent->name, nchan, nchan > 1 ? "s" : "", bsteps); + + return 0; +} + +static int +dispose_iface(struct device *dev) +{ + struct keywest_iface *iface = dev_get_drvdata(dev); + int i, rc; + + /* Make sure we stop all activity */ + if (pmac_low_i2c_lock(iface->node)) + return -ENODEV; + +#ifndef POLLED_MODE + spin_lock_irq(&iface->lock); + while (iface->state != state_idle) { + spin_unlock_irq(&iface->lock); + msleep(100); + spin_lock_irq(&iface->lock); + } +#endif /* POLLED_MODE */ + iface->state = state_dead; +#ifndef POLLED_MODE + spin_unlock_irq(&iface->lock); + free_irq(iface->irq, iface); +#endif /* POLLED_MODE */ + + pmac_low_i2c_unlock(iface->node); + + /* Release all channels */ + for (i=0; i<iface->chan_count; i++) { + struct keywest_chan* chan = &iface->channels[i]; + if (i2c_get_adapdata(&chan->adapter) == NULL) + continue; + rc = i2c_del_adapter(&chan->adapter); + i2c_set_adapdata(&chan->adapter, NULL); + /* We aren't that prepared to deal with this... */ + if (rc) + printk("i2c-keywest.c: i2c_del_adapter failed, that's bad !\n"); + } + iounmap(iface->base); + dev_set_drvdata(dev, NULL); + of_node_put(iface->node); + kfree(iface); + + return 0; +} + +static int +create_iface_macio(struct macio_dev* dev, const struct of_match *match) +{ + return create_iface(dev->ofdev.node, &dev->ofdev.dev); +} + +static int +dispose_iface_macio(struct macio_dev* dev) +{ + return dispose_iface(&dev->ofdev.dev); +} + +static int +create_iface_of_platform(struct of_device* dev, const struct of_match *match) +{ + return create_iface(dev->node, &dev->dev); +} + +static int +dispose_iface_of_platform(struct of_device* dev) +{ + return dispose_iface(&dev->dev); +} + +static struct of_match i2c_keywest_match[] = +{ + { + .name = OF_ANY_MATCH, + .type = "i2c", + .compatible = "keywest" + }, + {}, +}; + +static struct macio_driver i2c_keywest_macio_driver = +{ + .name = "i2c-keywest", + .match_table = i2c_keywest_match, + .probe = create_iface_macio, + .remove = dispose_iface_macio +}; + +static struct of_platform_driver i2c_keywest_of_platform_driver = +{ + .name = "i2c-keywest", + .match_table = i2c_keywest_match, + .probe = create_iface_of_platform, + .remove = dispose_iface_of_platform +}; + +static int __init +i2c_keywest_init(void) +{ + of_register_driver(&i2c_keywest_of_platform_driver); + macio_register_driver(&i2c_keywest_macio_driver); + + return 0; +} + +static void __exit +i2c_keywest_cleanup(void) +{ + of_unregister_driver(&i2c_keywest_of_platform_driver); + macio_unregister_driver(&i2c_keywest_macio_driver); +} + +module_init(i2c_keywest_init); +module_exit(i2c_keywest_cleanup); diff --git a/drivers/i2c/busses/i2c-keywest.h b/drivers/i2c/busses/i2c-keywest.h new file mode 100644 index 00000000000..c5022e1ca6f --- /dev/null +++ b/drivers/i2c/busses/i2c-keywest.h @@ -0,0 +1,108 @@ +#ifndef __I2C_KEYWEST_H__ +#define __I2C_KEYWEST_H__ + +/* The Tumbler audio equalizer can be really slow sometimes */ +#define POLL_TIMEOUT (2*HZ) + +/* Register indices */ +typedef enum { + reg_mode = 0, + reg_control, + reg_status, + reg_isr, + reg_ier, + reg_addr, + reg_subaddr, + reg_data +} reg_t; + + +/* Mode register */ +#define KW_I2C_MODE_100KHZ 0x00 +#define KW_I2C_MODE_50KHZ 0x01 +#define KW_I2C_MODE_25KHZ 0x02 +#define KW_I2C_MODE_DUMB 0x00 +#define KW_I2C_MODE_STANDARD 0x04 +#define KW_I2C_MODE_STANDARDSUB 0x08 +#define KW_I2C_MODE_COMBINED 0x0C +#define KW_I2C_MODE_MODE_MASK 0x0C +#define KW_I2C_MODE_CHAN_MASK 0xF0 + +/* Control register */ +#define KW_I2C_CTL_AAK 0x01 +#define KW_I2C_CTL_XADDR 0x02 +#define KW_I2C_CTL_STOP 0x04 +#define KW_I2C_CTL_START 0x08 + +/* Status register */ +#define KW_I2C_STAT_BUSY 0x01 +#define KW_I2C_STAT_LAST_AAK 0x02 +#define KW_I2C_STAT_LAST_RW 0x04 +#define KW_I2C_STAT_SDA 0x08 +#define KW_I2C_STAT_SCL 0x10 + +/* IER & ISR registers */ +#define KW_I2C_IRQ_DATA 0x01 +#define KW_I2C_IRQ_ADDR 0x02 +#define KW_I2C_IRQ_STOP 0x04 +#define KW_I2C_IRQ_START 0x08 +#define KW_I2C_IRQ_MASK 0x0F + +/* Physical interface */ +struct keywest_iface +{ + struct device_node *node; + void __iomem * base; + unsigned bsteps; + int irq; + spinlock_t lock; + struct keywest_chan *channels; + unsigned chan_count; + u8 cur_mode; + char read_write; + u8 *data; + unsigned datalen; + int state; + int result; + struct timer_list timeout_timer; + struct completion complete; +}; + +enum { + state_idle, + state_addr, + state_read, + state_write, + state_stop, + state_dead +}; + +/* Channel on an interface */ +struct keywest_chan +{ + struct i2c_adapter adapter; + struct keywest_iface* iface; + unsigned chan_no; +}; + +/* Register access */ + +static inline u8 __read_reg(struct keywest_iface *iface, reg_t reg) +{ + return in_8(iface->base + + (((unsigned)reg) << iface->bsteps)); +} + +static inline void __write_reg(struct keywest_iface *iface, reg_t reg, u8 val) +{ + out_8(iface->base + + (((unsigned)reg) << iface->bsteps), val); + (void)__read_reg(iface, reg_subaddr); +} + +#define write_reg(reg, val) __write_reg(iface, reg, val) +#define read_reg(reg) __read_reg(iface, reg) + + + +#endif /* __I2C_KEYWEST_H__ */ diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c new file mode 100644 index 00000000000..75b8d867dae --- /dev/null +++ b/drivers/i2c/busses/i2c-mpc.c @@ -0,0 +1,496 @@ +/* + * (C) Copyright 2003-2004 + * Humboldt Solutions Ltd, adrian@humboldt.co.uk. + + * This is a combined i2c adapter and algorithm driver for the + * MPC107/Tsi107 PowerPC northbridge and processors that include + * the same I2C unit (8240, 8245, 85xx). + * + * Release 0.8 + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <asm/io.h> +#ifdef CONFIG_FSL_OCP +#include <asm/ocp.h> +#define FSL_I2C_DEV_SEPARATE_DFSRR FS_I2C_SEPARATE_DFSRR +#define FSL_I2C_DEV_CLOCK_5200 FS_I2C_CLOCK_5200 +#else +#include <linux/fsl_devices.h> +#endif +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> + +#define MPC_I2C_ADDR 0x00 +#define MPC_I2C_FDR 0x04 +#define MPC_I2C_CR 0x08 +#define MPC_I2C_SR 0x0c +#define MPC_I2C_DR 0x10 +#define MPC_I2C_DFSRR 0x14 +#define MPC_I2C_REGION 0x20 + +#define CCR_MEN 0x80 +#define CCR_MIEN 0x40 +#define CCR_MSTA 0x20 +#define CCR_MTX 0x10 +#define CCR_TXAK 0x08 +#define CCR_RSTA 0x04 + +#define CSR_MCF 0x80 +#define CSR_MAAS 0x40 +#define CSR_MBB 0x20 +#define CSR_MAL 0x10 +#define CSR_SRW 0x04 +#define CSR_MIF 0x02 +#define CSR_RXAK 0x01 + +struct mpc_i2c { + char *base; + u32 interrupt; + wait_queue_head_t queue; + struct i2c_adapter adap; + int irq; + u32 flags; +}; + +static __inline__ void writeccr(struct mpc_i2c *i2c, u32 x) +{ + writeb(x, i2c->base + MPC_I2C_CR); +} + +static irqreturn_t mpc_i2c_isr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct mpc_i2c *i2c = dev_id; + if (readb(i2c->base + MPC_I2C_SR) & CSR_MIF) { + /* Read again to allow register to stabilise */ + i2c->interrupt = readb(i2c->base + MPC_I2C_SR); + writeb(0, i2c->base + MPC_I2C_SR); + wake_up_interruptible(&i2c->queue); + } + return IRQ_HANDLED; +} + +static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing) +{ + unsigned long orig_jiffies = jiffies; + u32 x; + int result = 0; + + if (i2c->irq == 0) + { + while (!(readb(i2c->base + MPC_I2C_SR) & CSR_MIF)) { + schedule(); + if (time_after(jiffies, orig_jiffies + timeout)) { + pr_debug("I2C: timeout\n"); + result = -EIO; + break; + } + } + x = readb(i2c->base + MPC_I2C_SR); + writeb(0, i2c->base + MPC_I2C_SR); + } else { + /* Interrupt mode */ + result = wait_event_interruptible_timeout(i2c->queue, + (i2c->interrupt & CSR_MIF), timeout * HZ); + + if (unlikely(result < 0)) + pr_debug("I2C: wait interrupted\n"); + else if (unlikely(!(i2c->interrupt & CSR_MIF))) { + pr_debug("I2C: wait timeout\n"); + result = -ETIMEDOUT; + } + + x = i2c->interrupt; + i2c->interrupt = 0; + } + + if (result < 0) + return result; + + if (!(x & CSR_MCF)) { + pr_debug("I2C: unfinished\n"); + return -EIO; + } + + if (x & CSR_MAL) { + pr_debug("I2C: MAL\n"); + return -EIO; + } + + if (writing && (x & CSR_RXAK)) { + pr_debug("I2C: No RXAK\n"); + /* generate stop */ + writeccr(i2c, CCR_MEN); + return -EIO; + } + return 0; +} + +static void mpc_i2c_setclock(struct mpc_i2c *i2c) +{ + /* Set clock and filters */ + if (i2c->flags & FSL_I2C_DEV_SEPARATE_DFSRR) { + writeb(0x31, i2c->base + MPC_I2C_FDR); + writeb(0x10, i2c->base + MPC_I2C_DFSRR); + } else if (i2c->flags & FSL_I2C_DEV_CLOCK_5200) + writeb(0x3f, i2c->base + MPC_I2C_FDR); + else + writel(0x1031, i2c->base + MPC_I2C_FDR); +} + +static void mpc_i2c_start(struct mpc_i2c *i2c) +{ + /* Clear arbitration */ + writeb(0, i2c->base + MPC_I2C_SR); + /* Start with MEN */ + writeccr(i2c, CCR_MEN); +} + +static void mpc_i2c_stop(struct mpc_i2c *i2c) +{ + writeccr(i2c, CCR_MEN); +} + +static int mpc_write(struct mpc_i2c *i2c, int target, + const u8 * data, int length, int restart) +{ + int i; + unsigned timeout = i2c->adap.timeout; + u32 flags = restart ? CCR_RSTA : 0; + + /* Start with MEN */ + if (!restart) + writeccr(i2c, CCR_MEN); + /* Start as master */ + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); + /* Write target byte */ + writeb((target << 1), i2c->base + MPC_I2C_DR); + + if (i2c_wait(i2c, timeout, 1) < 0) + return -1; + + for (i = 0; i < length; i++) { + /* Write data byte */ + writeb(data[i], i2c->base + MPC_I2C_DR); + + if (i2c_wait(i2c, timeout, 1) < 0) + return -1; + } + + return 0; +} + +static int mpc_read(struct mpc_i2c *i2c, int target, + u8 * data, int length, int restart) +{ + unsigned timeout = i2c->adap.timeout; + int i; + u32 flags = restart ? CCR_RSTA : 0; + + /* Start with MEN */ + if (!restart) + writeccr(i2c, CCR_MEN); + /* Switch to read - restart */ + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_MTX | flags); + /* Write target address byte - this time with the read flag set */ + writeb((target << 1) | 1, i2c->base + MPC_I2C_DR); + + if (i2c_wait(i2c, timeout, 1) < 0) + return -1; + + if (length) { + if (length == 1) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); + else + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA); + /* Dummy read */ + readb(i2c->base + MPC_I2C_DR); + } + + for (i = 0; i < length; i++) { + if (i2c_wait(i2c, timeout, 0) < 0) + return -1; + + /* Generate txack on next to last byte */ + if (i == length - 2) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_MSTA | CCR_TXAK); + /* Generate stop on last byte */ + if (i == length - 1) + writeccr(i2c, CCR_MIEN | CCR_MEN | CCR_TXAK); + data[i] = readb(i2c->base + MPC_I2C_DR); + } + + return length; +} + +static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) +{ + struct i2c_msg *pmsg; + int i; + int ret = 0; + unsigned long orig_jiffies = jiffies; + struct mpc_i2c *i2c = i2c_get_adapdata(adap); + + mpc_i2c_start(i2c); + + /* Allow bus up to 1s to become not busy */ + while (readb(i2c->base + MPC_I2C_SR) & CSR_MBB) { + if (signal_pending(current)) { + pr_debug("I2C: Interrupted\n"); + return -EINTR; + } + if (time_after(jiffies, orig_jiffies + HZ)) { + pr_debug("I2C: timeout\n"); + return -EIO; + } + schedule(); + } + + for (i = 0; ret >= 0 && i < num; i++) { + pmsg = &msgs[i]; + pr_debug("Doing %s %d bytes to 0x%02x - %d of %d messages\n", + pmsg->flags & I2C_M_RD ? "read" : "write", + pmsg->len, pmsg->addr, i + 1, num); + if (pmsg->flags & I2C_M_RD) + ret = + mpc_read(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); + else + ret = + mpc_write(i2c, pmsg->addr, pmsg->buf, pmsg->len, i); + } + mpc_i2c_stop(i2c); + return (ret < 0) ? ret : num; +} + +static u32 mpc_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static struct i2c_algorithm mpc_algo = { + .name = "MPC algorithm", + .id = I2C_ALGO_MPC107, + .master_xfer = mpc_xfer, + .functionality = mpc_functionality, +}; + +static struct i2c_adapter mpc_ops = { + .owner = THIS_MODULE, + .name = "MPC adapter", + .id = I2C_ALGO_MPC107 | I2C_HW_MPC107, + .algo = &mpc_algo, + .class = I2C_CLASS_HWMON, + .timeout = 1, + .retries = 1 +}; + +#ifdef CONFIG_FSL_OCP +static int __devinit mpc_i2c_probe(struct ocp_device *ocp) +{ + int result = 0; + struct mpc_i2c *i2c; + + if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { + return -ENOMEM; + } + memset(i2c, 0, sizeof(*i2c)); + + i2c->irq = ocp->def->irq; + i2c->flags = ((struct ocp_fs_i2c_data *)ocp->def->additions)->flags; + init_waitqueue_head(&i2c->queue); + + if (!request_mem_region(ocp->def->paddr, MPC_I2C_REGION, "i2c-mpc")) { + printk(KERN_ERR "i2c-mpc - resource unavailable\n"); + return -ENODEV; + } + + i2c->base = ioremap(ocp->def->paddr, MPC_I2C_REGION); + + if (!i2c->base) { + printk(KERN_ERR "i2c-mpc - failed to map controller\n"); + result = -ENOMEM; + goto fail_map; + } + + if (i2c->irq != OCP_IRQ_NA) + { + if ((result = request_irq(ocp->def->irq, mpc_i2c_isr, + 0, "i2c-mpc", i2c)) < 0) { + printk(KERN_ERR + "i2c-mpc - failed to attach interrupt\n"); + goto fail_irq; + } + } else + i2c->irq = 0; + + i2c->adap = mpc_ops; + i2c_set_adapdata(&i2c->adap, i2c); + + if ((result = i2c_add_adapter(&i2c->adap)) < 0) { + printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); + goto fail_add; + } + + mpc_i2c_setclock(i2c); + ocp_set_drvdata(ocp, i2c); + return result; + + fail_add: + if (ocp->def->irq != OCP_IRQ_NA) + free_irq(ocp->def->irq, 0); + fail_irq: + iounmap(i2c->base); + fail_map: + release_mem_region(ocp->def->paddr, MPC_I2C_REGION); + kfree(i2c); + return result; +} +static void __devexit mpc_i2c_remove(struct ocp_device *ocp) +{ + struct mpc_i2c *i2c = ocp_get_drvdata(ocp); + ocp_set_drvdata(ocp, NULL); + i2c_del_adapter(&i2c->adap); + + if (ocp->def->irq != OCP_IRQ_NA) + free_irq(i2c->irq, i2c); + iounmap(i2c->base); + release_mem_region(ocp->def->paddr, MPC_I2C_REGION); + kfree(i2c); +} + +static struct ocp_device_id mpc_iic_ids[] __devinitdata = { + {.vendor = OCP_VENDOR_FREESCALE,.function = OCP_FUNC_IIC}, + {.vendor = OCP_VENDOR_INVALID} +}; + +MODULE_DEVICE_TABLE(ocp, mpc_iic_ids); + +static struct ocp_driver mpc_iic_driver = { + .name = "iic", + .id_table = mpc_iic_ids, + .probe = mpc_i2c_probe, + .remove = __devexit_p(mpc_i2c_remove) +}; + +static int __init iic_init(void) +{ + return ocp_register_driver(&mpc_iic_driver); +} + +static void __exit iic_exit(void) +{ + ocp_unregister_driver(&mpc_iic_driver); +} + +module_init(iic_init); +module_exit(iic_exit); +#else +static int fsl_i2c_probe(struct device *device) +{ + int result = 0; + struct mpc_i2c *i2c; + struct platform_device *pdev = to_platform_device(device); + struct fsl_i2c_platform_data *pdata; + struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + pdata = (struct fsl_i2c_platform_data *) pdev->dev.platform_data; + + if (!(i2c = kmalloc(sizeof(*i2c), GFP_KERNEL))) { + return -ENOMEM; + } + memset(i2c, 0, sizeof(*i2c)); + + i2c->irq = platform_get_irq(pdev, 0); + i2c->flags = pdata->device_flags; + init_waitqueue_head(&i2c->queue); + + i2c->base = ioremap((phys_addr_t)r->start, MPC_I2C_REGION); + + if (!i2c->base) { + printk(KERN_ERR "i2c-mpc - failed to map controller\n"); + result = -ENOMEM; + goto fail_map; + } + + if (i2c->irq != 0) + if ((result = request_irq(i2c->irq, mpc_i2c_isr, + 0, "fsl-i2c", i2c)) < 0) { + printk(KERN_ERR + "i2c-mpc - failed to attach interrupt\n"); + goto fail_irq; + } + + i2c->adap = mpc_ops; + i2c_set_adapdata(&i2c->adap, i2c); + i2c->adap.dev.parent = &pdev->dev; + if ((result = i2c_add_adapter(&i2c->adap)) < 0) { + printk(KERN_ERR "i2c-mpc - failed to add adapter\n"); + goto fail_add; + } + + mpc_i2c_setclock(i2c); + dev_set_drvdata(device, i2c); + return result; + + fail_add: + if (i2c->irq != 0) + free_irq(i2c->irq, 0); + fail_irq: + iounmap(i2c->base); + fail_map: + kfree(i2c); + return result; +}; + +static int fsl_i2c_remove(struct device *device) +{ + struct mpc_i2c *i2c = dev_get_drvdata(device); + + dev_set_drvdata(device, NULL); + i2c_del_adapter(&i2c->adap); + + if (i2c->irq != 0) + free_irq(i2c->irq, i2c); + + iounmap(i2c->base); + kfree(i2c); + return 0; +}; + +/* Structure for a device driver */ +static struct device_driver fsl_i2c_driver = { + .name = "fsl-i2c", + .bus = &platform_bus_type, + .probe = fsl_i2c_probe, + .remove = fsl_i2c_remove, +}; + +static int __init fsl_i2c_init(void) +{ + return driver_register(&fsl_i2c_driver); +} + +static void __exit fsl_i2c_exit(void) +{ + driver_unregister(&fsl_i2c_driver); +} + +module_init(fsl_i2c_init); +module_exit(fsl_i2c_exit); + +#endif /* CONFIG_FSL_OCP */ + +MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>"); +MODULE_DESCRIPTION + ("I2C-Bus adapter for MPC107 bridge and MPC824x/85xx/52xx processors"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c new file mode 100644 index 00000000000..5b852782d2f --- /dev/null +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -0,0 +1,598 @@ +/* + * drivers/i2c/busses/i2c-mv64xxx.c + * + * Driver for the i2c controller on the Marvell line of host bridges for MIPS + * and PPC (e.g, gt642[46]0, mv643[46]0, mv644[46]0). + * + * Author: Mark A. Greer <mgreer@mvista.com> + * + * 2005 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spinlock.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/mv643xx.h> +#include <asm/io.h> + +/* Register defines */ +#define MV64XXX_I2C_REG_SLAVE_ADDR 0x00 +#define MV64XXX_I2C_REG_DATA 0x04 +#define MV64XXX_I2C_REG_CONTROL 0x08 +#define MV64XXX_I2C_REG_STATUS 0x0c +#define MV64XXX_I2C_REG_BAUD 0x0c +#define MV64XXX_I2C_REG_EXT_SLAVE_ADDR 0x10 +#define MV64XXX_I2C_REG_SOFT_RESET 0x1c + +#define MV64XXX_I2C_REG_CONTROL_ACK 0x00000004 +#define MV64XXX_I2C_REG_CONTROL_IFLG 0x00000008 +#define MV64XXX_I2C_REG_CONTROL_STOP 0x00000010 +#define MV64XXX_I2C_REG_CONTROL_START 0x00000020 +#define MV64XXX_I2C_REG_CONTROL_TWSIEN 0x00000040 +#define MV64XXX_I2C_REG_CONTROL_INTEN 0x00000080 + +/* Ctlr status values */ +#define MV64XXX_I2C_STATUS_BUS_ERR 0x00 +#define MV64XXX_I2C_STATUS_MAST_START 0x08 +#define MV64XXX_I2C_STATUS_MAST_REPEAT_START 0x10 +#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK 0x18 +#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK 0x20 +#define MV64XXX_I2C_STATUS_MAST_WR_ACK 0x28 +#define MV64XXX_I2C_STATUS_MAST_WR_NO_ACK 0x30 +#define MV64XXX_I2C_STATUS_MAST_LOST_ARB 0x38 +#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK 0x40 +#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK 0x48 +#define MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK 0x50 +#define MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK 0x58 +#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK 0xd0 +#define MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_NO_ACK 0xd8 +#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK 0xe0 +#define MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_NO_ACK 0xe8 +#define MV64XXX_I2C_STATUS_NO_STATUS 0xf8 + +/* Driver states */ +enum { + MV64XXX_I2C_STATE_INVALID, + MV64XXX_I2C_STATE_IDLE, + MV64XXX_I2C_STATE_WAITING_FOR_START_COND, + MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK, + MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK, + MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK, + MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA, + MV64XXX_I2C_STATE_ABORTING, +}; + +/* Driver actions */ +enum { + MV64XXX_I2C_ACTION_INVALID, + MV64XXX_I2C_ACTION_CONTINUE, + MV64XXX_I2C_ACTION_SEND_START, + MV64XXX_I2C_ACTION_SEND_ADDR_1, + MV64XXX_I2C_ACTION_SEND_ADDR_2, + MV64XXX_I2C_ACTION_SEND_DATA, + MV64XXX_I2C_ACTION_RCV_DATA, + MV64XXX_I2C_ACTION_RCV_DATA_STOP, + MV64XXX_I2C_ACTION_SEND_STOP, +}; + +struct mv64xxx_i2c_data { + int irq; + u32 state; + u32 action; + u32 cntl_bits; + void __iomem *reg_base; + u32 reg_base_p; + u32 addr1; + u32 addr2; + u32 bytes_left; + u32 byte_posn; + u32 block; + int rc; + u32 freq_m; + u32 freq_n; + wait_queue_head_t waitq; + spinlock_t lock; + struct i2c_msg *msg; + struct i2c_adapter adapter; +}; + +/* + ***************************************************************************** + * + * Finite State Machine & Interrupt Routines + * + ***************************************************************************** + */ +static void +mv64xxx_i2c_fsm(struct mv64xxx_i2c_data *drv_data, u32 status) +{ + /* + * If state is idle, then this is likely the remnants of an old + * operation that driver has given up on or the user has killed. + * If so, issue the stop condition and go to idle. + */ + if (drv_data->state == MV64XXX_I2C_STATE_IDLE) { + drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; + return; + } + + if (drv_data->state == MV64XXX_I2C_STATE_ABORTING) { + drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + return; + } + + /* The status from the ctlr [mostly] tells us what to do next */ + switch (status) { + /* Start condition interrupt */ + case MV64XXX_I2C_STATUS_MAST_START: /* 0x08 */ + case MV64XXX_I2C_STATUS_MAST_REPEAT_START: /* 0x10 */ + drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_1; + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_ADDR_1_ACK; + break; + + /* Performing a write */ + case MV64XXX_I2C_STATUS_MAST_WR_ADDR_ACK: /* 0x18 */ + if (drv_data->msg->flags & I2C_M_TEN) { + drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2; + drv_data->state = + MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK; + break; + } + /* FALLTHRU */ + case MV64XXX_I2C_STATUS_MAST_WR_ADDR_2_ACK: /* 0xd0 */ + case MV64XXX_I2C_STATUS_MAST_WR_ACK: /* 0x28 */ + if (drv_data->bytes_left > 0) { + drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA; + drv_data->state = + MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK; + drv_data->bytes_left--; + } else { + drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + } + break; + + /* Performing a read */ + case MV64XXX_I2C_STATUS_MAST_RD_ADDR_ACK: /* 40 */ + if (drv_data->msg->flags & I2C_M_TEN) { + drv_data->action = MV64XXX_I2C_ACTION_SEND_ADDR_2; + drv_data->state = + MV64XXX_I2C_STATE_WAITING_FOR_ADDR_2_ACK; + break; + } + /* FALLTHRU */ + case MV64XXX_I2C_STATUS_MAST_RD_ADDR_2_ACK: /* 0xe0 */ + if (drv_data->bytes_left == 0) { + drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + break; + } + /* FALLTHRU */ + case MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK: /* 0x50 */ + if (status != MV64XXX_I2C_STATUS_MAST_RD_DATA_ACK) + drv_data->action = MV64XXX_I2C_ACTION_CONTINUE; + else { + drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA; + drv_data->bytes_left--; + } + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA; + + if (drv_data->bytes_left == 1) + drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_ACK; + break; + + case MV64XXX_I2C_STATUS_MAST_RD_DATA_NO_ACK: /* 0x58 */ + drv_data->action = MV64XXX_I2C_ACTION_RCV_DATA_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + break; + + case MV64XXX_I2C_STATUS_MAST_WR_ADDR_NO_ACK: /* 0x20 */ + case MV64XXX_I2C_STATUS_MAST_WR_NO_ACK: /* 30 */ + case MV64XXX_I2C_STATUS_MAST_RD_ADDR_NO_ACK: /* 48 */ + /* Doesn't seem to be a device at other end */ + drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + drv_data->rc = -ENODEV; + break; + + default: + dev_err(&drv_data->adapter.dev, + "mv64xxx_i2c_fsm: Ctlr Error -- state: 0x%x, " + "status: 0x%x, addr: 0x%x, flags: 0x%x\n", + drv_data->state, status, drv_data->msg->addr, + drv_data->msg->flags); + drv_data->action = MV64XXX_I2C_ACTION_SEND_STOP; + drv_data->state = MV64XXX_I2C_STATE_IDLE; + drv_data->rc = -EIO; + } +} + +static void +mv64xxx_i2c_do_action(struct mv64xxx_i2c_data *drv_data) +{ + switch(drv_data->action) { + case MV64XXX_I2C_ACTION_CONTINUE: + writel(drv_data->cntl_bits, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + break; + + case MV64XXX_I2C_ACTION_SEND_START: + writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_START, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + break; + + case MV64XXX_I2C_ACTION_SEND_ADDR_1: + writel(drv_data->addr1, + drv_data->reg_base + MV64XXX_I2C_REG_DATA); + writel(drv_data->cntl_bits, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + break; + + case MV64XXX_I2C_ACTION_SEND_ADDR_2: + writel(drv_data->addr2, + drv_data->reg_base + MV64XXX_I2C_REG_DATA); + writel(drv_data->cntl_bits, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + break; + + case MV64XXX_I2C_ACTION_SEND_DATA: + writel(drv_data->msg->buf[drv_data->byte_posn++], + drv_data->reg_base + MV64XXX_I2C_REG_DATA); + writel(drv_data->cntl_bits, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + break; + + case MV64XXX_I2C_ACTION_RCV_DATA: + drv_data->msg->buf[drv_data->byte_posn++] = + readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA); + writel(drv_data->cntl_bits, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + break; + + case MV64XXX_I2C_ACTION_RCV_DATA_STOP: + drv_data->msg->buf[drv_data->byte_posn++] = + readl(drv_data->reg_base + MV64XXX_I2C_REG_DATA); + drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; + writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->block = 0; + wake_up_interruptible(&drv_data->waitq); + break; + + case MV64XXX_I2C_ACTION_INVALID: + default: + dev_err(&drv_data->adapter.dev, + "mv64xxx_i2c_do_action: Invalid action: %d\n", + drv_data->action); + drv_data->rc = -EIO; + /* FALLTHRU */ + case MV64XXX_I2C_ACTION_SEND_STOP: + drv_data->cntl_bits &= ~MV64XXX_I2C_REG_CONTROL_INTEN; + writel(drv_data->cntl_bits | MV64XXX_I2C_REG_CONTROL_STOP, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->block = 0; + wake_up_interruptible(&drv_data->waitq); + break; + } +} + +static int +mv64xxx_i2c_intr(int irq, void *dev_id, struct pt_regs *regs) +{ + struct mv64xxx_i2c_data *drv_data = dev_id; + unsigned long flags; + u32 status; + int rc = IRQ_NONE; + + spin_lock_irqsave(&drv_data->lock, flags); + while (readl(drv_data->reg_base + MV64XXX_I2C_REG_CONTROL) & + MV64XXX_I2C_REG_CONTROL_IFLG) { + status = readl(drv_data->reg_base + MV64XXX_I2C_REG_STATUS); + mv64xxx_i2c_fsm(drv_data, status); + mv64xxx_i2c_do_action(drv_data); + rc = IRQ_HANDLED; + } + spin_unlock_irqrestore(&drv_data->lock, flags); + + return rc; +} + +/* + ***************************************************************************** + * + * I2C Msg Execution Routines + * + ***************************************************************************** + */ +static void +mv64xxx_i2c_prepare_for_io(struct mv64xxx_i2c_data *drv_data, + struct i2c_msg *msg) +{ + u32 dir = 0; + + drv_data->msg = msg; + drv_data->byte_posn = 0; + drv_data->bytes_left = msg->len; + drv_data->rc = 0; + drv_data->cntl_bits = MV64XXX_I2C_REG_CONTROL_ACK | + MV64XXX_I2C_REG_CONTROL_INTEN | MV64XXX_I2C_REG_CONTROL_TWSIEN; + + if (msg->flags & I2C_M_RD) + dir = 1; + + if (msg->flags & I2C_M_REV_DIR_ADDR) + dir ^= 1; + + if (msg->flags & I2C_M_TEN) { + drv_data->addr1 = 0xf0 | (((u32)msg->addr & 0x300) >> 7) | dir; + drv_data->addr2 = (u32)msg->addr & 0xff; + } else { + drv_data->addr1 = ((u32)msg->addr & 0x7f) << 1 | dir; + drv_data->addr2 = 0; + } +} + +static void +mv64xxx_i2c_wait_for_completion(struct mv64xxx_i2c_data *drv_data) +{ + long time_left; + unsigned long flags; + char abort = 0; + + time_left = wait_event_interruptible_timeout(drv_data->waitq, + !drv_data->block, msecs_to_jiffies(drv_data->adapter.timeout)); + + spin_lock_irqsave(&drv_data->lock, flags); + if (!time_left) { /* Timed out */ + drv_data->rc = -ETIMEDOUT; + abort = 1; + } else if (time_left < 0) { /* Interrupted/Error */ + drv_data->rc = time_left; /* errno value */ + abort = 1; + } + + if (abort && drv_data->block) { + drv_data->state = MV64XXX_I2C_STATE_ABORTING; + spin_unlock_irqrestore(&drv_data->lock, flags); + + time_left = wait_event_timeout(drv_data->waitq, + !drv_data->block, + msecs_to_jiffies(drv_data->adapter.timeout)); + + if (time_left <= 0) { + drv_data->state = MV64XXX_I2C_STATE_IDLE; + dev_err(&drv_data->adapter.dev, + "mv64xxx: I2C bus locked\n"); + } + } else + spin_unlock_irqrestore(&drv_data->lock, flags); +} + +static int +mv64xxx_i2c_execute_msg(struct mv64xxx_i2c_data *drv_data, struct i2c_msg *msg) +{ + unsigned long flags; + + spin_lock_irqsave(&drv_data->lock, flags); + mv64xxx_i2c_prepare_for_io(drv_data, msg); + + if (unlikely(msg->flags & I2C_M_NOSTART)) { /* Skip start/addr phases */ + if (drv_data->msg->flags & I2C_M_RD) { + /* No action to do, wait for slave to send a byte */ + drv_data->action = MV64XXX_I2C_ACTION_CONTINUE; + drv_data->state = + MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_DATA; + } else { + drv_data->action = MV64XXX_I2C_ACTION_SEND_DATA; + drv_data->state = + MV64XXX_I2C_STATE_WAITING_FOR_SLAVE_ACK; + drv_data->bytes_left--; + } + } else { + drv_data->action = MV64XXX_I2C_ACTION_SEND_START; + drv_data->state = MV64XXX_I2C_STATE_WAITING_FOR_START_COND; + } + + drv_data->block = 1; + mv64xxx_i2c_do_action(drv_data); + spin_unlock_irqrestore(&drv_data->lock, flags); + + mv64xxx_i2c_wait_for_completion(drv_data); + return drv_data->rc; +} + +/* + ***************************************************************************** + * + * I2C Core Support Routines (Interface to higher level I2C code) + * + ***************************************************************************** + */ +static u32 +mv64xxx_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR | I2C_FUNC_SMBUS_EMUL; +} + +static int +mv64xxx_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + struct mv64xxx_i2c_data *drv_data = i2c_get_adapdata(adap); + int i, rc = 0; + + for (i=0; i<num; i++) + if ((rc = mv64xxx_i2c_execute_msg(drv_data, &msgs[i])) != 0) + break; + + return rc; +} + +static struct i2c_algorithm mv64xxx_i2c_algo = { + .name = MV64XXX_I2C_CTLR_NAME " algorithm", + .id = I2C_ALGO_MV64XXX, + .master_xfer = mv64xxx_i2c_xfer, + .functionality = mv64xxx_i2c_functionality, +}; + +/* + ***************************************************************************** + * + * Driver Interface & Early Init Routines + * + ***************************************************************************** + */ +static void __devinit +mv64xxx_i2c_hw_init(struct mv64xxx_i2c_data *drv_data) +{ + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SOFT_RESET); + writel((((drv_data->freq_m & 0xf) << 3) | (drv_data->freq_n & 0x7)), + drv_data->reg_base + MV64XXX_I2C_REG_BAUD); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_SLAVE_ADDR); + writel(0, drv_data->reg_base + MV64XXX_I2C_REG_EXT_SLAVE_ADDR); + writel(MV64XXX_I2C_REG_CONTROL_TWSIEN | MV64XXX_I2C_REG_CONTROL_STOP, + drv_data->reg_base + MV64XXX_I2C_REG_CONTROL); + drv_data->state = MV64XXX_I2C_STATE_IDLE; +} + +static int __devinit +mv64xxx_i2c_map_regs(struct platform_device *pd, + struct mv64xxx_i2c_data *drv_data) +{ + struct resource *r; + + if ((r = platform_get_resource(pd, IORESOURCE_MEM, 0)) && + request_mem_region(r->start, MV64XXX_I2C_REG_BLOCK_SIZE, + drv_data->adapter.name)) { + + drv_data->reg_base = ioremap(r->start, + MV64XXX_I2C_REG_BLOCK_SIZE); + drv_data->reg_base_p = r->start; + } else + return -ENOMEM; + + return 0; +} + +static void __devexit +mv64xxx_i2c_unmap_regs(struct mv64xxx_i2c_data *drv_data) +{ + if (drv_data->reg_base) { + iounmap(drv_data->reg_base); + release_mem_region(drv_data->reg_base_p, + MV64XXX_I2C_REG_BLOCK_SIZE); + } + + drv_data->reg_base = NULL; + drv_data->reg_base_p = 0; +} + +static int __devinit +mv64xxx_i2c_probe(struct device *dev) +{ + struct platform_device *pd = to_platform_device(dev); + struct mv64xxx_i2c_data *drv_data; + struct mv64xxx_i2c_pdata *pdata = dev->platform_data; + int rc; + + if ((pd->id != 0) || !pdata) + return -ENODEV; + + drv_data = kmalloc(sizeof(struct mv64xxx_i2c_data), GFP_KERNEL); + + if (!drv_data) + return -ENOMEM; + + memset(drv_data, 0, sizeof(struct mv64xxx_i2c_data)); + + if (mv64xxx_i2c_map_regs(pd, drv_data)) { + rc = -ENODEV; + goto exit_kfree; + } + + strncpy(drv_data->adapter.name, MV64XXX_I2C_CTLR_NAME " adapter", + I2C_NAME_SIZE); + + init_waitqueue_head(&drv_data->waitq); + spin_lock_init(&drv_data->lock); + + drv_data->freq_m = pdata->freq_m; + drv_data->freq_n = pdata->freq_n; + drv_data->irq = platform_get_irq(pd, 0); + drv_data->adapter.id = I2C_ALGO_MV64XXX | I2C_HW_MV64XXX; + drv_data->adapter.algo = &mv64xxx_i2c_algo; + drv_data->adapter.owner = THIS_MODULE; + drv_data->adapter.class = I2C_CLASS_HWMON; + drv_data->adapter.timeout = pdata->timeout; + drv_data->adapter.retries = pdata->retries; + dev_set_drvdata(dev, drv_data); + i2c_set_adapdata(&drv_data->adapter, drv_data); + + if (request_irq(drv_data->irq, mv64xxx_i2c_intr, 0, + MV64XXX_I2C_CTLR_NAME, drv_data)) { + + dev_err(dev, "mv64xxx: Can't register intr handler " + "irq: %d\n", drv_data->irq); + rc = -EINVAL; + goto exit_unmap_regs; + } else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) { + dev_err(dev, "mv64xxx: Can't add i2c adapter, rc: %d\n", -rc); + goto exit_free_irq; + } + + mv64xxx_i2c_hw_init(drv_data); + + return 0; + + exit_free_irq: + free_irq(drv_data->irq, drv_data); + exit_unmap_regs: + mv64xxx_i2c_unmap_regs(drv_data); + exit_kfree: + kfree(drv_data); + return rc; +} + +static int __devexit +mv64xxx_i2c_remove(struct device *dev) +{ + struct mv64xxx_i2c_data *drv_data = dev_get_drvdata(dev); + int rc; + + rc = i2c_del_adapter(&drv_data->adapter); + free_irq(drv_data->irq, drv_data); + mv64xxx_i2c_unmap_regs(drv_data); + kfree(drv_data); + + return rc; +} + +static struct device_driver mv64xxx_i2c_driver = { + .name = MV64XXX_I2C_CTLR_NAME, + .bus = &platform_bus_type, + .probe = mv64xxx_i2c_probe, + .remove = mv64xxx_i2c_remove, +}; + +static int __init +mv64xxx_i2c_init(void) +{ + return driver_register(&mv64xxx_i2c_driver); +} + +static void __exit +mv64xxx_i2c_exit(void) +{ + driver_unregister(&mv64xxx_i2c_driver); +} + +module_init(mv64xxx_i2c_init); +module_exit(mv64xxx_i2c_exit); + +MODULE_AUTHOR("Mark A. Greer <mgreer@mvista.com>"); +MODULE_DESCRIPTION("Marvell mv64xxx host bridge i2c ctlr driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c new file mode 100644 index 00000000000..6d13127c8c4 --- /dev/null +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -0,0 +1,410 @@ +/* + SMBus driver for nVidia nForce2 MCP + + Added nForce3 Pro 150 Thomas Leibold <thomas@plx.com>, + Ported to 2.5 Patrick Dreker <patrick@dreker.de>, + Copyright (c) 2003 Hans-Frieder Vogt <hfvogt@arcor.de>, + Based on + SMBus 2.0 driver for AMD-8111 IO-Hub + Copyright (c) 2002 Vojtech Pavlik + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + SUPPORTED DEVICES PCI ID + nForce2 MCP 0064 + nForce2 Ultra 400 MCP 0084 + nForce3 Pro150 MCP 00D4 + nForce3 250Gb MCP 00E4 + nForce4 MCP 0052 + + This driver supports the 2 SMBuses that are included in the MCP of the + nForce2/3/4 chipsets. +*/ + +/* Note: we assume there can only be one nForce2, with two SMBus interfaces */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/delay.h> +#include <asm/io.h> + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR ("Hans-Frieder Vogt <hfvogt@arcor.de>"); +MODULE_DESCRIPTION("nForce2 SMBus driver"); + + +struct nforce2_smbus { + struct pci_dev *dev; + struct i2c_adapter adapter; + int base; + int size; +}; + + +/* + * nVidia nForce2 SMBus control register definitions + */ +#define NFORCE_PCI_SMB1 0x50 +#define NFORCE_PCI_SMB2 0x54 + + +/* + * ACPI 2.0 chapter 13 SMBus 2.0 EC register model + */ +#define NVIDIA_SMB_PRTCL (smbus->base + 0x00) /* protocol, PEC */ +#define NVIDIA_SMB_STS (smbus->base + 0x01) /* status */ +#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */ +#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */ +#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */ +#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data bytes */ +#define NVIDIA_SMB_ALRM_A (smbus->base + 0x25) /* alarm address */ +#define NVIDIA_SMB_ALRM_D (smbus->base + 0x26) /* 2 bytes alarm data */ + +#define NVIDIA_SMB_STS_DONE 0x80 +#define NVIDIA_SMB_STS_ALRM 0x40 +#define NVIDIA_SMB_STS_RES 0x20 +#define NVIDIA_SMB_STS_STATUS 0x1f + +#define NVIDIA_SMB_PRTCL_WRITE 0x00 +#define NVIDIA_SMB_PRTCL_READ 0x01 +#define NVIDIA_SMB_PRTCL_QUICK 0x02 +#define NVIDIA_SMB_PRTCL_BYTE 0x04 +#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06 +#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08 +#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a +#define NVIDIA_SMB_PRTCL_PROC_CALL 0x0c +#define NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL 0x0d +#define NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA 0x4a +#define NVIDIA_SMB_PRTCL_PEC 0x80 + + +/* Other settings */ +#define MAX_TIMEOUT 256 + + + +static s32 nforce2_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data); +static u32 nforce2_func(struct i2c_adapter *adapter); + + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = nforce2_access, + .functionality = nforce2_func, +}; + +static struct i2c_adapter nforce2_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +/* Return -1 on error. See smbus.h for more information */ +static s32 nforce2_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + struct nforce2_smbus *smbus = adap->algo_data; + unsigned char protocol, pec, temp; + unsigned char len = 0; /* to keep the compiler quiet */ + int timeout = 0; + int i; + + protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ : + NVIDIA_SMB_PRTCL_WRITE; + pec = (flags & I2C_CLIENT_PEC) ? NVIDIA_SMB_PRTCL_PEC : 0; + + switch (size) { + + case I2C_SMBUS_QUICK: + protocol |= NVIDIA_SMB_PRTCL_QUICK; + read_write = I2C_SMBUS_WRITE; + break; + + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, NVIDIA_SMB_CMD); + protocol |= NVIDIA_SMB_PRTCL_BYTE; + break; + + case I2C_SMBUS_BYTE_DATA: + outb_p(command, NVIDIA_SMB_CMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, NVIDIA_SMB_DATA); + protocol |= NVIDIA_SMB_PRTCL_BYTE_DATA; + break; + + case I2C_SMBUS_WORD_DATA: + outb_p(command, NVIDIA_SMB_CMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word, NVIDIA_SMB_DATA); + outb_p(data->word >> 8, NVIDIA_SMB_DATA+1); + } + protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec; + break; + + case I2C_SMBUS_BLOCK_DATA: + outb_p(command, NVIDIA_SMB_CMD); + if (read_write == I2C_SMBUS_WRITE) { + len = min_t(u8, data->block[0], 32); + outb_p(len, NVIDIA_SMB_BCNT); + for (i = 0; i < len; i++) + outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); + } + protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec; + break; + + case I2C_SMBUS_I2C_BLOCK_DATA: + len = min_t(u8, data->block[0], 32); + outb_p(command, NVIDIA_SMB_CMD); + outb_p(len, NVIDIA_SMB_BCNT); + if (read_write == I2C_SMBUS_WRITE) + for (i = 0; i < len; i++) + outb_p(data->block[i + 1], NVIDIA_SMB_DATA+i); + protocol |= NVIDIA_SMB_PRTCL_I2C_BLOCK_DATA; + break; + + case I2C_SMBUS_PROC_CALL: + dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + return -1; + /* + outb_p(command, NVIDIA_SMB_CMD); + outb_p(data->word, NVIDIA_SMB_DATA); + outb_p(data->word >> 8, NVIDIA_SMB_DATA + 1); + protocol = NVIDIA_SMB_PRTCL_PROC_CALL | pec; + read_write = I2C_SMBUS_READ; + break; + */ + + case I2C_SMBUS_BLOCK_PROC_CALL: + dev_err(&adap->dev, "I2C_SMBUS_BLOCK_PROC_CALL not supported!\n"); + return -1; + /* + protocol |= pec; + len = min_t(u8, data->block[0], 31); + outb_p(command, NVIDIA_SMB_CMD); + outb_p(len, NVIDIA_SMB_BCNT); + for (i = 0; i < len; i++) + outb_p(data->block[i + 1], NVIDIA_SMB_DATA + i); + protocol = NVIDIA_SMB_PRTCL_BLOCK_PROC_CALL | pec; + read_write = I2C_SMBUS_READ; + break; + */ + + case I2C_SMBUS_WORD_DATA_PEC: + case I2C_SMBUS_BLOCK_DATA_PEC: + case I2C_SMBUS_PROC_CALL_PEC: + case I2C_SMBUS_BLOCK_PROC_CALL_PEC: + dev_err(&adap->dev, "Unexpected software PEC transaction %d\n.", size); + return -1; + + default: + dev_err(&adap->dev, "Unsupported transaction %d\n", size); + return -1; + } + + outb_p((addr & 0x7f) << 1, NVIDIA_SMB_ADDR); + outb_p(protocol, NVIDIA_SMB_PRTCL); + + temp = inb_p(NVIDIA_SMB_STS); + +#if 0 + do { + i2c_do_pause(1); + temp = inb_p(NVIDIA_SMB_STS); + } while (((temp & NVIDIA_SMB_STS_DONE) == 0) && (timeout++ < MAX_TIMEOUT)); +#endif + if (~temp & NVIDIA_SMB_STS_DONE) { + udelay(500); + temp = inb_p(NVIDIA_SMB_STS); + } + if (~temp & NVIDIA_SMB_STS_DONE) { + msleep(10); + temp = inb_p(NVIDIA_SMB_STS); + } + + if ((timeout >= MAX_TIMEOUT) || (~temp & NVIDIA_SMB_STS_DONE) + || (temp & NVIDIA_SMB_STS_STATUS)) + return -1; + + if (read_write == I2C_SMBUS_WRITE) + return 0; + + switch (size) { + + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + data->byte = inb_p(NVIDIA_SMB_DATA); + break; + + case I2C_SMBUS_WORD_DATA: + /* case I2C_SMBUS_PROC_CALL: not supported */ + data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8); + break; + + case I2C_SMBUS_BLOCK_DATA: + /* case I2C_SMBUS_BLOCK_PROC_CALL: not supported */ + len = inb_p(NVIDIA_SMB_BCNT); + len = min_t(u8, len, 32); + case I2C_SMBUS_I2C_BLOCK_DATA: + for (i = 0; i < len; i++) + data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i); + data->block[0] = len; + break; + } + + return 0; +} + + +static u32 nforce2_func(struct i2c_adapter *adapter) +{ + /* other functionality might be possible, but is not tested */ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA /* | + I2C_FUNC_SMBUS_BLOCK_DATA */; +} + + +static struct pci_device_id nforce2_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS) }, + { 0 } +}; + + +MODULE_DEVICE_TABLE (pci, nforce2_ids); + + +static int __devinit nforce2_probe_smb (struct pci_dev *dev, int reg, + struct nforce2_smbus *smbus, char *name) +{ + u16 iobase; + int error; + + if (pci_read_config_word(dev, reg, &iobase) != PCIBIOS_SUCCESSFUL) { + dev_err(&smbus->adapter.dev, "Error reading PCI config for %s\n", name); + return -1; + } + smbus->dev = dev; + smbus->base = iobase & 0xfffc; + smbus->size = 8; + + if (!request_region(smbus->base, smbus->size, "nForce2 SMBus")) { + dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n", + smbus->base, smbus->base+smbus->size-1, name); + return -1; + } + smbus->adapter = nforce2_adapter; + smbus->adapter.algo_data = smbus; + smbus->adapter.dev.parent = &dev->dev; + snprintf(smbus->adapter.name, I2C_NAME_SIZE, + "SMBus nForce2 adapter at %04x", smbus->base); + + error = i2c_add_adapter(&smbus->adapter); + if (error) { + dev_err(&smbus->adapter.dev, "Failed to register adapter.\n"); + release_region(smbus->base, smbus->size); + return -1; + } + dev_info(&smbus->adapter.dev, "nForce2 SMBus adapter at %#x\n", smbus->base); + return 0; +} + + +static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + struct nforce2_smbus *smbuses; + int res1, res2; + + /* we support 2 SMBus adapters */ + if (!(smbuses = (void *)kmalloc(2*sizeof(struct nforce2_smbus), + GFP_KERNEL))) + return -ENOMEM; + memset (smbuses, 0, 2*sizeof(struct nforce2_smbus)); + pci_set_drvdata(dev, smbuses); + + /* SMBus adapter 1 */ + res1 = nforce2_probe_smb (dev, NFORCE_PCI_SMB1, &smbuses[0], "SMB1"); + if (res1 < 0) { + dev_err(&dev->dev, "Error probing SMB1.\n"); + smbuses[0].base = 0; /* to have a check value */ + } + res2 = nforce2_probe_smb (dev, NFORCE_PCI_SMB2, &smbuses[1], "SMB2"); + if (res2 < 0) { + dev_err(&dev->dev, "Error probing SMB2.\n"); + smbuses[1].base = 0; /* to have a check value */ + } + if ((res1 < 0) && (res2 < 0)) { + /* we did not find even one of the SMBuses, so we give up */ + kfree(smbuses); + return -ENODEV; + } + + return 0; +} + + +static void __devexit nforce2_remove(struct pci_dev *dev) +{ + struct nforce2_smbus *smbuses = (void*) pci_get_drvdata(dev); + + if (smbuses[0].base) { + i2c_del_adapter(&smbuses[0].adapter); + release_region(smbuses[0].base, smbuses[0].size); + } + if (smbuses[1].base) { + i2c_del_adapter(&smbuses[1].adapter); + release_region(smbuses[1].base, smbuses[1].size); + } + kfree(smbuses); +} + +static struct pci_driver nforce2_driver = { + .name = "nForce2_smbus", + .id_table = nforce2_ids, + .probe = nforce2_probe, + .remove = __devexit_p(nforce2_remove), +}; + +static int __init nforce2_init(void) +{ + return pci_register_driver(&nforce2_driver); +} + +static void __exit nforce2_exit(void) +{ + pci_unregister_driver(&nforce2_driver); +} + +module_init(nforce2_init); +module_exit(nforce2_exit); + diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c new file mode 100644 index 00000000000..cb5e722301d --- /dev/null +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -0,0 +1,175 @@ +/* ------------------------------------------------------------------------ * + * i2c-parport.c I2C bus over parallel port * + * ------------------------------------------------------------------------ * + Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + + Based on older i2c-velleman.c driver + Copyright (C) 1995-2000 Simon G. Vogl + With some changes from: + Frodo Looijaard <frodol@dds.nl> + Kyösti Mälkki <kmalkki@cc.hut.fi> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ------------------------------------------------------------------------ */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> +#include "i2c-parport.h" + +#define DEFAULT_BASE 0x378 + +static u16 base; +module_param(base, ushort, 0); +MODULE_PARM_DESC(base, "Base I/O address"); + +/* ----- Low-level parallel port access ----------------------------------- */ + +static inline void port_write(unsigned char p, unsigned char d) +{ + outb(d, base+p); +} + +static inline unsigned char port_read(unsigned char p) +{ + return inb(base+p); +} + +/* ----- Unified line operation functions --------------------------------- */ + +static inline void line_set(int state, const struct lineop *op) +{ + u8 oldval = port_read(op->port); + + /* Touch only the bit(s) needed */ + if ((op->inverted && !state) || (!op->inverted && state)) + port_write(op->port, oldval | op->val); + else + port_write(op->port, oldval & ~op->val); +} + +static inline int line_get(const struct lineop *op) +{ + u8 oldval = port_read(op->port); + + return ((op->inverted && (oldval & op->val) != op->val) + || (!op->inverted && (oldval & op->val) == op->val)); +} + +/* ----- I2C algorithm call-back functions and structures ----------------- */ + +static void parport_setscl(void *data, int state) +{ + line_set(state, &adapter_parm[type].setscl); +} + +static void parport_setsda(void *data, int state) +{ + line_set(state, &adapter_parm[type].setsda); +} + +static int parport_getscl(void *data) +{ + return line_get(&adapter_parm[type].getscl); +} + +static int parport_getsda(void *data) +{ + return line_get(&adapter_parm[type].getsda); +} + +/* Encapsulate the functions above in the correct structure + Note that getscl will be set to NULL by the attaching code for adapters + that cannot read SCL back */ +static struct i2c_algo_bit_data parport_algo_data = { + .setsda = parport_setsda, + .setscl = parport_setscl, + .getsda = parport_getsda, + .getscl = parport_getscl, + .udelay = 50, + .mdelay = 50, + .timeout = HZ, +}; + +/* ----- I2c structure ---------------------------------------------------- */ + +static struct i2c_adapter parport_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .id = I2C_HW_B_LP, + .algo_data = &parport_algo_data, + .name = "Parallel port adapter (light)", +}; + +/* ----- Module loading, unloading and information ------------------------ */ + +static int __init i2c_parport_init(void) +{ + int type_count; + + type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm); + if (type < 0 || type >= type_count) { + printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type); + type = 0; + } + + if (base == 0) { + printk(KERN_INFO "i2c-parport: using default base 0x%x\n", DEFAULT_BASE); + base = DEFAULT_BASE; + } + + if (!request_region(base, 3, "i2c-parport")) + return -ENODEV; + + if (!adapter_parm[type].getscl.val) + parport_algo_data.getscl = NULL; + + /* Reset hardware to a sane state (SCL and SDA high) */ + parport_setsda(NULL, 1); + parport_setscl(NULL, 1); + /* Other init if needed (power on...) */ + if (adapter_parm[type].init.val) + line_set(1, &adapter_parm[type].init); + + if (i2c_bit_add_bus(&parport_adapter) < 0) { + printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); + release_region(base, 3); + return -ENODEV; + } + + return 0; +} + +static void __exit i2c_parport_exit(void) +{ + /* Un-init if needed (power off...) */ + if (adapter_parm[type].init.val) + line_set(0, &adapter_parm[type].init); + + i2c_bit_del_bus(&parport_adapter); + release_region(base, 3); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("I2C bus over parallel port (light)"); +MODULE_LICENSE("GPL"); + +module_init(i2c_parport_init); +module_exit(i2c_parport_exit); diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c new file mode 100644 index 00000000000..e9560bab51c --- /dev/null +++ b/drivers/i2c/busses/i2c-parport.c @@ -0,0 +1,267 @@ +/* ------------------------------------------------------------------------ * + * i2c-parport.c I2C bus over parallel port * + * ------------------------------------------------------------------------ * + Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + + Based on older i2c-philips-par.c driver + Copyright (C) 1995-2000 Simon G. Vogl + With some changes from: + Frodo Looijaard <frodol@dds.nl> + Kyösti Mälkki <kmalkki@cc.hut.fi> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ------------------------------------------------------------------------ */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/parport.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include "i2c-parport.h" + +/* ----- Device list ------------------------------------------------------ */ + +struct i2c_par { + struct pardevice *pdev; + struct i2c_adapter adapter; + struct i2c_algo_bit_data algo_data; + struct i2c_par *next; +}; + +static struct i2c_par *adapter_list; + +/* ----- Low-level parallel port access ----------------------------------- */ + +static void port_write_data(struct parport *p, unsigned char d) +{ + parport_write_data(p, d); +} + +static void port_write_control(struct parport *p, unsigned char d) +{ + parport_write_control(p, d); +} + +static unsigned char port_read_data(struct parport *p) +{ + return parport_read_data(p); +} + +static unsigned char port_read_status(struct parport *p) +{ + return parport_read_status(p); +} + +static unsigned char port_read_control(struct parport *p) +{ + return parport_read_control(p); +} + +static void (*port_write[])(struct parport *, unsigned char) = { + port_write_data, + NULL, + port_write_control, +}; + +static unsigned char (*port_read[])(struct parport *) = { + port_read_data, + port_read_status, + port_read_control, +}; + +/* ----- Unified line operation functions --------------------------------- */ + +static inline void line_set(struct parport *data, int state, + const struct lineop *op) +{ + u8 oldval = port_read[op->port](data); + + /* Touch only the bit(s) needed */ + if ((op->inverted && !state) || (!op->inverted && state)) + port_write[op->port](data, oldval | op->val); + else + port_write[op->port](data, oldval & ~op->val); +} + +static inline int line_get(struct parport *data, + const struct lineop *op) +{ + u8 oldval = port_read[op->port](data); + + return ((op->inverted && (oldval & op->val) != op->val) + || (!op->inverted && (oldval & op->val) == op->val)); +} + +/* ----- I2C algorithm call-back functions and structures ----------------- */ + +static void parport_setscl(void *data, int state) +{ + line_set((struct parport *) data, state, &adapter_parm[type].setscl); +} + +static void parport_setsda(void *data, int state) +{ + line_set((struct parport *) data, state, &adapter_parm[type].setsda); +} + +static int parport_getscl(void *data) +{ + return line_get((struct parport *) data, &adapter_parm[type].getscl); +} + +static int parport_getsda(void *data) +{ + return line_get((struct parport *) data, &adapter_parm[type].getsda); +} + +/* Encapsulate the functions above in the correct structure. + Note that this is only a template, from which the real structures are + copied. The attaching code will set getscl to NULL for adapters that + cannot read SCL back, and will also make the the data field point to + the parallel port structure. */ +static struct i2c_algo_bit_data parport_algo_data = { + .setsda = parport_setsda, + .setscl = parport_setscl, + .getsda = parport_getsda, + .getscl = parport_getscl, + .udelay = 60, + .mdelay = 60, + .timeout = HZ, +}; + +/* ----- I2c and parallel port call-back functions and structures --------- */ + +static struct i2c_adapter parport_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .id = I2C_HW_B_LP, + .name = "Parallel port adapter", +}; + +static void i2c_parport_attach (struct parport *port) +{ + struct i2c_par *adapter; + + adapter = kmalloc(sizeof(struct i2c_par), GFP_KERNEL); + if (adapter == NULL) { + printk(KERN_ERR "i2c-parport: Failed to kmalloc\n"); + return; + } + memset(adapter, 0x00, sizeof(struct i2c_par)); + + pr_debug("i2c-parport: attaching to %s\n", port->name); + adapter->pdev = parport_register_device(port, "i2c-parport", + NULL, NULL, NULL, PARPORT_FLAG_EXCL, NULL); + if (!adapter->pdev) { + printk(KERN_ERR "i2c-parport: Unable to register with parport\n"); + goto ERROR0; + } + + /* Fill the rest of the structure */ + adapter->adapter = parport_adapter; + adapter->algo_data = parport_algo_data; + if (!adapter_parm[type].getscl.val) + adapter->algo_data.getscl = NULL; + adapter->algo_data.data = port; + adapter->adapter.algo_data = &adapter->algo_data; + + if (parport_claim_or_block(adapter->pdev) < 0) { + printk(KERN_ERR "i2c-parport: Could not claim parallel port\n"); + goto ERROR1; + } + + /* Reset hardware to a sane state (SCL and SDA high) */ + parport_setsda(port, 1); + parport_setscl(port, 1); + /* Other init if needed (power on...) */ + if (adapter_parm[type].init.val) + line_set(port, 1, &adapter_parm[type].init); + + parport_release(adapter->pdev); + + if (i2c_bit_add_bus(&adapter->adapter) < 0) { + printk(KERN_ERR "i2c-parport: Unable to register with I2C\n"); + goto ERROR1; + } + + /* Add the new adapter to the list */ + adapter->next = adapter_list; + adapter_list = adapter; + return; + +ERROR1: + parport_unregister_device(adapter->pdev); +ERROR0: + kfree(adapter); +} + +static void i2c_parport_detach (struct parport *port) +{ + struct i2c_par *adapter, *prev; + + /* Walk the list */ + for (prev = NULL, adapter = adapter_list; adapter; + prev = adapter, adapter = adapter->next) { + if (adapter->pdev->port == port) { + /* Un-init if needed (power off...) */ + if (adapter_parm[type].init.val) + line_set(port, 0, &adapter_parm[type].init); + + i2c_bit_del_bus(&adapter->adapter); + parport_unregister_device(adapter->pdev); + if (prev) + prev->next = adapter->next; + else + adapter_list = adapter->next; + kfree(adapter); + return; + } + } +} + +static struct parport_driver i2c_driver = { + .name = "i2c-parport", + .attach = i2c_parport_attach, + .detach = i2c_parport_detach, +}; + +/* ----- Module loading, unloading and information ------------------------ */ + +static int __init i2c_parport_init(void) +{ + int type_count; + + type_count = sizeof(adapter_parm)/sizeof(struct adapter_parm); + if (type < 0 || type >= type_count) { + printk(KERN_WARNING "i2c-parport: invalid type (%d)\n", type); + type = 0; + } + + return parport_register_driver(&i2c_driver); +} + +static void __exit i2c_parport_exit(void) +{ + parport_unregister_driver(&i2c_driver); +} + +MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>"); +MODULE_DESCRIPTION("I2C bus over parallel port"); +MODULE_LICENSE("GPL"); + +module_init(i2c_parport_init); +module_exit(i2c_parport_exit); diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h new file mode 100644 index 00000000000..f63a5377928 --- /dev/null +++ b/drivers/i2c/busses/i2c-parport.h @@ -0,0 +1,94 @@ +/* ------------------------------------------------------------------------ * + * i2c-parport.h I2C bus over parallel port * + * ------------------------------------------------------------------------ * + Copyright (C) 2003-2004 Jean Delvare <khali@linux-fr.org> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ------------------------------------------------------------------------ */ + +#ifdef DATA +#undef DATA +#endif + +#define DATA 0 +#define STAT 1 +#define CTRL 2 + +struct lineop { + u8 val; + u8 port; + u8 inverted; +}; + +struct adapter_parm { + struct lineop setsda; + struct lineop setscl; + struct lineop getsda; + struct lineop getscl; + struct lineop init; +}; + +static struct adapter_parm adapter_parm[] = { + /* type 0: Philips adapter */ + { + .setsda = { 0x80, DATA, 1 }, + .setscl = { 0x08, CTRL, 0 }, + .getsda = { 0x80, STAT, 0 }, + .getscl = { 0x08, STAT, 0 }, + }, + /* type 1: home brew teletext adapter */ + { + .setsda = { 0x02, DATA, 0 }, + .setscl = { 0x01, DATA, 0 }, + .getsda = { 0x80, STAT, 1 }, + }, + /* type 2: Velleman K8000 adapter */ + { + .setsda = { 0x02, CTRL, 1 }, + .setscl = { 0x08, CTRL, 1 }, + .getsda = { 0x10, STAT, 0 }, + }, + /* type 3: ELV adapter */ + { + .setsda = { 0x02, DATA, 1 }, + .setscl = { 0x01, DATA, 1 }, + .getsda = { 0x40, STAT, 1 }, + .getscl = { 0x08, STAT, 1 }, + }, + /* type 4: ADM1032 evaluation board */ + { + .setsda = { 0x02, DATA, 1 }, + .setscl = { 0x01, DATA, 1 }, + .getsda = { 0x10, STAT, 1 }, + .init = { 0xf0, DATA, 0 }, + }, + /* type 5: ADM1025, ADM1030 and ADM1031 evaluation boards */ + { + .setsda = { 0x02, DATA, 1 }, + .setscl = { 0x01, DATA, 1 }, + .getsda = { 0x10, STAT, 1 }, + }, +}; + +static int type; +module_param(type, int, 0); +MODULE_PARM_DESC(type, + "Type of adapter:\n" + " 0 = Philips adapter\n" + " 1 = home brew teletext adapter\n" + " 2 = Velleman K8000 adapter\n" + " 3 = ELV adapter\n" + " 4 = ADM1032 evaluation board\n" + " 5 = ADM1025, ADM1030 and ADM1031 evaluation boards\n"); diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c new file mode 100644 index 00000000000..9c611134db9 --- /dev/null +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -0,0 +1,184 @@ +/* + * i2c-pca-isa.c driver for PCA9564 on ISA boards + * Copyright (C) 2004 Arcom Control Systems + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/delay.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/pci.h> +#include <linux/wait.h> + +#include <linux/i2c.h> +#include <linux/i2c-algo-pca.h> + +#include <asm/io.h> +#include <asm/irq.h> + +#include "../algos/i2c-algo-pca.h" + +#define IO_SIZE 4 + +#undef DEBUG_IO +//#define DEBUG_IO + +static unsigned long base = 0x330; +static int irq = 10; + +/* Data sheet recommends 59kHz for 100kHz operation due to variation + * in the actual clock rate */ +static int clock = I2C_PCA_CON_59kHz; + +static int own = 0x55; + +static wait_queue_head_t pca_wait; + +static int pca_isa_getown(struct i2c_algo_pca_data *adap) +{ + return (own); +} + +static int pca_isa_getclock(struct i2c_algo_pca_data *adap) +{ + return (clock); +} + +static void +pca_isa_writebyte(struct i2c_algo_pca_data *adap, int reg, int val) +{ +#ifdef DEBUG_IO + static char *names[] = { "T/O", "DAT", "ADR", "CON" }; + printk("*** write %s at %#lx <= %#04x\n", names[reg], base+reg, val); +#endif + outb(val, base+reg); +} + +static int +pca_isa_readbyte(struct i2c_algo_pca_data *adap, int reg) +{ + int res = inb(base+reg); +#ifdef DEBUG_IO + { + static char *names[] = { "STA", "DAT", "ADR", "CON" }; + printk("*** read %s => %#04x\n", names[reg], res); + } +#endif + return res; +} + +static int pca_isa_waitforinterrupt(struct i2c_algo_pca_data *adap) +{ + int ret = 0; + + if (irq > -1) { + ret = wait_event_interruptible(pca_wait, + pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI); + } else { + while ((pca_isa_readbyte(adap, I2C_PCA_CON) & I2C_PCA_CON_SI) == 0) + udelay(100); + } + return ret; +} + +static irqreturn_t pca_handler(int this_irq, void *dev_id, struct pt_regs *regs) { + wake_up_interruptible(&pca_wait); + return IRQ_HANDLED; +} + +static struct i2c_algo_pca_data pca_isa_data = { + .get_own = pca_isa_getown, + .get_clock = pca_isa_getclock, + .write_byte = pca_isa_writebyte, + .read_byte = pca_isa_readbyte, + .wait_for_interrupt = pca_isa_waitforinterrupt, +}; + +static struct i2c_adapter pca_isa_ops = { + .owner = THIS_MODULE, + .id = I2C_HW_A_ISA, + .algo_data = &pca_isa_data, + .name = "PCA9564 ISA Adapter", +}; + +static int __init pca_isa_init(void) +{ + + init_waitqueue_head(&pca_wait); + + printk(KERN_INFO "i2c-pca-isa: i/o base %#08lx. irq %d\n", base, irq); + + if (!request_region(base, IO_SIZE, "i2c-pca-isa")) { + printk(KERN_ERR "i2c-pca-isa: I/O address %#08lx is in use.\n", base); + goto out; + } + + if (irq > -1) { + if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) { + printk(KERN_ERR "i2c-pca-isa: Request irq%d failed\n", irq); + goto out_region; + } + } + + if (i2c_pca_add_bus(&pca_isa_ops) < 0) { + printk(KERN_ERR "i2c-pca-isa: Failed to add i2c bus\n"); + goto out_irq; + } + + return 0; + + out_irq: + if (irq > -1) + free_irq(irq, &pca_isa_ops); + out_region: + release_region(base, IO_SIZE); + out: + return -ENODEV; +} + +static void pca_isa_exit(void) +{ + i2c_pca_del_bus(&pca_isa_ops); + + if (irq > 0) { + disable_irq(irq); + free_irq(irq, &pca_isa_ops); + } + release_region(base, IO_SIZE); +} + +MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>"); +MODULE_DESCRIPTION("ISA base PCA9564 driver"); +MODULE_LICENSE("GPL"); + +module_param(base, ulong, 0); +MODULE_PARM_DESC(base, "I/O base address"); + +module_param(irq, int, 0); +MODULE_PARM_DESC(irq, "IRQ"); +module_param(clock, int, 0); +MODULE_PARM_DESC(clock, "Clock rate as described in table 1 of PCA9564 datasheet"); + +module_param(own, int, 0); /* the driver can't do slave mode, so there's no real point in this */ + +module_init(pca_isa_init); +module_exit(pca_isa_exit); diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c new file mode 100644 index 00000000000..646381b6b3b --- /dev/null +++ b/drivers/i2c/busses/i2c-piix4.c @@ -0,0 +1,490 @@ +/* + piix4.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports: + Intel PIIX4, 440MX + Serverworks OSB4, CSB5, CSB6 + SMSC Victory66 + + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <linux/apm_bios.h> +#include <linux/dmi.h> +#include <asm/io.h> + + +struct sd { + const unsigned short mfr; + const unsigned short dev; + const unsigned char fn; + const char *name; +}; + +/* PIIX4 SMBus address offsets */ +#define SMBHSTSTS (0 + piix4_smba) +#define SMBHSLVSTS (1 + piix4_smba) +#define SMBHSTCNT (2 + piix4_smba) +#define SMBHSTCMD (3 + piix4_smba) +#define SMBHSTADD (4 + piix4_smba) +#define SMBHSTDAT0 (5 + piix4_smba) +#define SMBHSTDAT1 (6 + piix4_smba) +#define SMBBLKDAT (7 + piix4_smba) +#define SMBSLVCNT (8 + piix4_smba) +#define SMBSHDWCMD (9 + piix4_smba) +#define SMBSLVEVT (0xA + piix4_smba) +#define SMBSLVDAT (0xC + piix4_smba) + +/* count for request_region */ +#define SMBIOSIZE 8 + +/* PCI Address Constants */ +#define SMBBA 0x090 +#define SMBHSTCFG 0x0D2 +#define SMBSLVC 0x0D3 +#define SMBSHDW1 0x0D4 +#define SMBSHDW2 0x0D5 +#define SMBREV 0x0D6 + +/* Other settings */ +#define MAX_TIMEOUT 500 +#define ENABLE_INT9 0 + +/* PIIX4 constants */ +#define PIIX4_QUICK 0x00 +#define PIIX4_BYTE 0x04 +#define PIIX4_BYTE_DATA 0x08 +#define PIIX4_WORD_DATA 0x0C +#define PIIX4_BLOCK_DATA 0x14 + +/* insmod parameters */ + +/* If force is set to anything different from 0, we forcibly enable the + PIIX4. DANGEROUS! */ +static int force = 0; +module_param (force, int, 0); +MODULE_PARM_DESC(force, "Forcibly enable the PIIX4. DANGEROUS!"); + +/* If force_addr is set to anything different from 0, we forcibly enable + the PIIX4 at the given address. VERY DANGEROUS! */ +static int force_addr = 0; +module_param (force_addr, int, 0); +MODULE_PARM_DESC(force_addr, + "Forcibly enable the PIIX4 at the given address. " + "EXTREMELY DANGEROUS!"); + +/* If fix_hstcfg is set to anything different from 0, we reset one of the + registers to be a valid value. */ +static int fix_hstcfg = 0; +module_param (fix_hstcfg, int, 0); +MODULE_PARM_DESC(fix_hstcfg, + "Fix config register. Needed on some boards (Force CPCI735)."); + +static int piix4_transaction(void); + +static unsigned short piix4_smba = 0; +static struct i2c_adapter piix4_adapter; + +static struct dmi_system_id __devinitdata piix4_dmi_table[] = { + { + .ident = "IBM", + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "IBM"), }, + }, + { }, +}; + +static int __devinit piix4_setup(struct pci_dev *PIIX4_dev, + const struct pci_device_id *id) +{ + unsigned char temp; + + /* match up the function */ + if (PCI_FUNC(PIIX4_dev->devfn) != id->driver_data) + return -ENODEV; + + dev_info(&PIIX4_dev->dev, "Found %s device\n", pci_name(PIIX4_dev)); + + /* Don't access SMBus on IBM systems which get corrupted eeproms */ + if (dmi_check_system(piix4_dmi_table) && + PIIX4_dev->vendor == PCI_VENDOR_ID_INTEL) { + dev_err(&PIIX4_dev->dev, "IBM Laptop detected; this module " + "may corrupt your serial eeprom! Refusing to load " + "module!\n"); + return -EPERM; + } + + /* Determine the address of the SMBus areas */ + if (force_addr) { + piix4_smba = force_addr & 0xfff0; + force = 0; + } else { + pci_read_config_word(PIIX4_dev, SMBBA, &piix4_smba); + piix4_smba &= 0xfff0; + if(piix4_smba == 0) { + dev_err(&PIIX4_dev->dev, "SMB base address " + "uninitialized - upgrade BIOS or use " + "force_addr=0xaddr\n"); + return -ENODEV; + } + } + + if (!request_region(piix4_smba, SMBIOSIZE, "piix4-smbus")) { + dev_err(&PIIX4_dev->dev, "SMB region 0x%x already in use!\n", + piix4_smba); + return -ENODEV; + } + + pci_read_config_byte(PIIX4_dev, SMBHSTCFG, &temp); + + /* Some BIOS will set up the chipset incorrectly and leave a register + in an undefined state (causing I2C to act very strangely). */ + if (temp & 0x02) { + if (fix_hstcfg) { + dev_info(&PIIX4_dev->dev, "Working around buggy BIOS " + "(I2C)\n"); + temp &= 0xfd; + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp); + } else { + dev_info(&PIIX4_dev->dev, "Unusual config register " + "value\n"); + dev_info(&PIIX4_dev->dev, "Try using fix_hstcfg=1 if " + "you experience problems\n"); + } + } + + /* If force_addr is set, we program the new address here. Just to make + sure, we disable the PIIX4 first. */ + if (force_addr) { + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp & 0xfe); + pci_write_config_word(PIIX4_dev, SMBBA, piix4_smba); + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, temp | 0x01); + dev_info(&PIIX4_dev->dev, "WARNING: SMBus interface set to " + "new address %04x!\n", piix4_smba); + } else if ((temp & 1) == 0) { + if (force) { + /* This should never need to be done, but has been + * noted that many Dell machines have the SMBus + * interface on the PIIX4 disabled!? NOTE: This assumes + * I/O space and other allocations WERE done by the + * Bios! Don't complain if your hardware does weird + * things after enabling this. :') Check for Bios + * updates before resorting to this. + */ + pci_write_config_byte(PIIX4_dev, SMBHSTCFG, + temp | 1); + dev_printk(KERN_NOTICE, &PIIX4_dev->dev, + "WARNING: SMBus interface has been " + "FORCEFULLY ENABLED!\n"); + } else { + dev_err(&PIIX4_dev->dev, + "Host SMBus controller not enabled!\n"); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + return -ENODEV; + } + } + + if ((temp & 0x0E) == 8) + dev_dbg(&PIIX4_dev->dev, "Using Interrupt 9 for SMBus.\n"); + else if ((temp & 0x0E) == 0) + dev_dbg(&PIIX4_dev->dev, "Using Interrupt SMI# for SMBus.\n"); + else + dev_err(&PIIX4_dev->dev, "Illegal Interrupt configuration " + "(or code out of date)!\n"); + + pci_read_config_byte(PIIX4_dev, SMBREV, &temp); + dev_dbg(&PIIX4_dev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&PIIX4_dev->dev, "SMBA = 0x%X\n", piix4_smba); + + return 0; +} + +/* Another internally used function */ +static int piix4_transaction(void) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&piix4_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_dbg(&piix4_adapter.dev, "SMBus busy (%02x). " + "Resetting... \n", temp); + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_err(&piix4_adapter.dev, "Failed! (%02x)\n", temp); + return -1; + } else { + dev_dbg(&piix4_adapter.dev, "Successfull!\n"); + } + } + + /* start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + + /* We will always wait for a fraction of a second! (See PIIX4 docs errata) */ + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_err(&piix4_adapter.dev, "SMBus Timeout!\n"); + result = -1; + } + + if (temp & 0x10) { + result = -1; + dev_err(&piix4_adapter.dev, "Error: Failed bus transaction\n"); + } + + if (temp & 0x08) { + result = -1; + dev_dbg(&piix4_adapter.dev, "Bus collision! SMBus may be " + "locked until next hard reset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } + + if (temp & 0x04) { + result = -1; + dev_dbg(&piix4_adapter.dev, "Error: no response!\n"); + } + + if (inb_p(SMBHSTSTS) != 0x00) + outb_p(inb(SMBHSTSTS), SMBHSTSTS); + + if ((temp = inb_p(SMBHSTSTS)) != 0x00) { + dev_err(&piix4_adapter.dev, "Failed reset at end of " + "transaction (%02x)\n", temp); + } + dev_dbg(&piix4_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + return result; +} + +/* Return -1 on error. */ +static s32 piix4_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + int i, len; + + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_err(&adap->dev, "I2C_SMBUS_PROC_CALL not supported!\n"); + return -1; + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = PIIX4_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + size = PIIX4_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + size = PIIX4_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = PIIX4_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + if (len > 32) + len = 32; + outb_p(len, SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + size = PIIX4_BLOCK_DATA; + break; + } + + outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + + if (piix4_transaction()) /* Error in transaction */ + return -1; + + if ((read_write == I2C_SMBUS_WRITE) || (size == PIIX4_QUICK)) + return 0; + + + switch (size) { + case PIIX4_BYTE: /* Where is the result put? I assume here it is in + SMBHSTDAT0 but it might just as well be in the + SMBHSTCMD. No clue in the docs */ + + data->byte = inb_p(SMBHSTDAT0); + break; + case PIIX4_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case PIIX4_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case PIIX4_BLOCK_DATA: + data->block[0] = inb_p(SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMBBLKDAT); + break; + } + return 0; +} + +static u32 piix4_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = piix4_access, + .functionality = piix4_func, +}; + +static struct i2c_adapter piix4_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static struct pci_device_id piix4_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3), + .driver_data = 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4), + .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5), + .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6), + .driver_data = 0 }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82443MX_3), + .driver_data = 3 }, + { PCI_DEVICE(PCI_VENDOR_ID_EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_3), + .driver_data = 0 }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, piix4_ids); + +static int __devinit piix4_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + int retval; + + retval = piix4_setup(dev, id); + if (retval) + return retval; + + /* set up the driverfs linkage to our parent device */ + piix4_adapter.dev.parent = &dev->dev; + + snprintf(piix4_adapter.name, I2C_NAME_SIZE, + "SMBus PIIX4 adapter at %04x", piix4_smba); + + if ((retval = i2c_add_adapter(&piix4_adapter))) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + } + + return retval; +} + +static void __devexit piix4_remove(struct pci_dev *dev) +{ + if (piix4_smba) { + i2c_del_adapter(&piix4_adapter); + release_region(piix4_smba, SMBIOSIZE); + piix4_smba = 0; + } +} + +static struct pci_driver piix4_driver = { + .name = "piix4_smbus", + .id_table = piix4_ids, + .probe = piix4_probe, + .remove = __devexit_p(piix4_remove), +}; + +static int __init i2c_piix4_init(void) +{ + return pci_register_driver(&piix4_driver); +} + +static void __exit i2c_piix4_exit(void) +{ + pci_unregister_driver(&piix4_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl> and " + "Philip Edelbrock <phil@netroedge.com>"); +MODULE_DESCRIPTION("PIIX4 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_piix4_init); +module_exit(i2c_piix4_exit); diff --git a/drivers/i2c/busses/i2c-prosavage.c b/drivers/i2c/busses/i2c-prosavage.c new file mode 100644 index 00000000000..13d66289933 --- /dev/null +++ b/drivers/i2c/busses/i2c-prosavage.c @@ -0,0 +1,334 @@ +/* + * kernel/busses/i2c-prosavage.c + * + * i2c bus driver for S3/VIA 8365/8375 graphics processor. + * Copyright (c) 2003 Henk Vergonet <henk@god.dyndns.org> + * Based on code written by: + * Frodo Looijaard <frodol@dds.nl>, + * Philip Edelbrock <phil@netroedge.com>, + * Ralph Metzler <rjkm@thp.uni-koeln.de>, and + * Mark D. Studebaker <mdsxyz123@yahoo.com> + * Simon Vogl + * and others + * + * Please read the lm_sensors documentation for details on use. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ +/* 18-05-2003 HVE - created + * 14-06-2003 HVE - adapted for lm_sensors2 + * 17-06-2003 HVE - linux 2.5.xx compatible + * 18-06-2003 HVE - codingstyle + * 21-06-2003 HVE - compatibility lm_sensors2 and linux 2.5.xx + * codingstyle, mmio enabled + * + * This driver interfaces to the I2C bus of the VIA north bridge embedded + * ProSavage4/8 devices. Usefull for gaining access to the TV Encoder chips. + * + * Graphics cores: + * S3/VIA KM266/VT8375 aka ProSavage8 + * S3/VIA KM133/VT8365 aka Savage4 + * + * Two serial busses are implemented: + * SERIAL1 - I2C serial communications interface + * SERIAL2 - DDC2 monitor communications interface + * + * Tested on a FX41 mainboard, see http://www.shuttle.com + * + * + * TODO: + * - integration with prosavage framebuffer device + * (Additional documentation needed :( + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* + * driver configuration + */ +#define MAX_BUSSES 2 + +struct s_i2c_bus { + void __iomem *mmvga; + int i2c_reg; + int adap_ok; + struct i2c_adapter adap; + struct i2c_algo_bit_data algo; +}; + +struct s_i2c_chip { + void __iomem *mmio; + struct s_i2c_bus i2c_bus[MAX_BUSSES]; +}; + + +/* + * i2c configuration + */ +#ifndef I2C_HW_B_S3VIA +#define I2C_HW_B_S3VIA 0x18 /* S3VIA ProSavage adapter */ +#endif + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +/* + * S3/VIA 8365/8375 registers + */ +#define VGA_CR_IX 0x3d4 +#define VGA_CR_DATA 0x3d5 + +#define CR_SERIAL1 0xa0 /* I2C serial communications interface */ +#define MM_SERIAL1 0xff20 +#define CR_SERIAL2 0xb1 /* DDC2 monitor communications interface */ + +/* based on vt8365 documentation */ +#define I2C_ENAB 0x10 +#define I2C_SCL_OUT 0x01 +#define I2C_SDA_OUT 0x02 +#define I2C_SCL_IN 0x04 +#define I2C_SDA_IN 0x08 + +#define SET_CR_IX(p, val) writeb((val), (p)->mmvga + VGA_CR_IX) +#define SET_CR_DATA(p, val) writeb((val), (p)->mmvga + VGA_CR_DATA) +#define GET_CR_DATA(p) readb((p)->mmvga + VGA_CR_DATA) + + +/* + * Serial bus line handling + * + * serial communications register as parameter in private data + * + * TODO: locks with other code sections accessing video registers? + */ +static void bit_s3via_setscl(void *bus, int val) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + unsigned int r; + + SET_CR_IX(p, p->i2c_reg); + r = GET_CR_DATA(p); + r |= I2C_ENAB; + if (val) { + r |= I2C_SCL_OUT; + } else { + r &= ~I2C_SCL_OUT; + } + SET_CR_DATA(p, r); +} + +static void bit_s3via_setsda(void *bus, int val) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + unsigned int r; + + SET_CR_IX(p, p->i2c_reg); + r = GET_CR_DATA(p); + r |= I2C_ENAB; + if (val) { + r |= I2C_SDA_OUT; + } else { + r &= ~I2C_SDA_OUT; + } + SET_CR_DATA(p, r); +} + +static int bit_s3via_getscl(void *bus) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + + SET_CR_IX(p, p->i2c_reg); + return (0 != (GET_CR_DATA(p) & I2C_SCL_IN)); +} + +static int bit_s3via_getsda(void *bus) +{ + struct s_i2c_bus *p = (struct s_i2c_bus *)bus; + + SET_CR_IX(p, p->i2c_reg); + return (0 != (GET_CR_DATA(p) & I2C_SDA_IN)); +} + + +/* + * adapter initialisation + */ +static int i2c_register_bus(struct pci_dev *dev, struct s_i2c_bus *p, void __iomem *mmvga, u32 i2c_reg) +{ + int ret; + p->adap.owner = THIS_MODULE; + p->adap.id = I2C_HW_B_S3VIA; + p->adap.algo_data = &p->algo; + p->adap.dev.parent = &dev->dev; + p->algo.setsda = bit_s3via_setsda; + p->algo.setscl = bit_s3via_setscl; + p->algo.getsda = bit_s3via_getsda; + p->algo.getscl = bit_s3via_getscl; + p->algo.udelay = CYCLE_DELAY; + p->algo.mdelay = CYCLE_DELAY; + p->algo.timeout = TIMEOUT; + p->algo.data = p; + p->mmvga = mmvga; + p->i2c_reg = i2c_reg; + + ret = i2c_bit_add_bus(&p->adap); + if (ret) { + return ret; + } + + p->adap_ok = 1; + return 0; +} + + +/* + * Cleanup stuff + */ +static void prosavage_remove(struct pci_dev *dev) +{ + struct s_i2c_chip *chip; + int i, ret; + + chip = (struct s_i2c_chip *)pci_get_drvdata(dev); + + if (!chip) { + return; + } + for (i = MAX_BUSSES - 1; i >= 0; i--) { + if (chip->i2c_bus[i].adap_ok == 0) + continue; + + ret = i2c_bit_del_bus(&chip->i2c_bus[i].adap); + if (ret) { + dev_err(&dev->dev, "%s not removed\n", + chip->i2c_bus[i].adap.name); + } + } + if (chip->mmio) { + iounmap(chip->mmio); + } + kfree(chip); +} + + +/* + * Detect chip and initialize it + */ +static int __devinit prosavage_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int ret; + unsigned long base, len; + struct s_i2c_chip *chip; + struct s_i2c_bus *bus; + + pci_set_drvdata(dev, kmalloc(sizeof(struct s_i2c_chip), GFP_KERNEL)); + chip = (struct s_i2c_chip *)pci_get_drvdata(dev); + if (chip == NULL) { + return -ENOMEM; + } + + memset(chip, 0, sizeof(struct s_i2c_chip)); + + base = dev->resource[0].start & PCI_BASE_ADDRESS_MEM_MASK; + len = dev->resource[0].end - base + 1; + chip->mmio = ioremap_nocache(base, len); + + if (chip->mmio == NULL) { + dev_err(&dev->dev, "ioremap failed\n"); + prosavage_remove(dev); + return -ENODEV; + } + + + /* + * Chip initialisation + */ + /* Unlock Extended IO Space ??? */ + + + /* + * i2c bus registration + */ + bus = &chip->i2c_bus[0]; + snprintf(bus->adap.name, sizeof(bus->adap.name), + "ProSavage I2C bus at %02x:%02x.%x", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL1); + if (ret) { + goto err_adap; + } + /* + * ddc bus registration + */ + bus = &chip->i2c_bus[1]; + snprintf(bus->adap.name, sizeof(bus->adap.name), + "ProSavage DDC bus at %02x:%02x.%x", + dev->bus->number, PCI_SLOT(dev->devfn), PCI_FUNC(dev->devfn)); + ret = i2c_register_bus(dev, bus, chip->mmio + 0x8000, CR_SERIAL2); + if (ret) { + goto err_adap; + } + return 0; +err_adap: + dev_err(&dev->dev, "%s failed\n", bus->adap.name); + prosavage_remove(dev); + return ret; +} + + +/* + * Data for PCI driver interface + */ +static struct pci_device_id prosavage_pci_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_SAVAGE4) }, + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_PROSAVAGE8) }, + { 0, }, +}; + +MODULE_DEVICE_TABLE (pci, prosavage_pci_tbl); + +static struct pci_driver prosavage_driver = { + .name = "prosavage_smbus", + .id_table = prosavage_pci_tbl, + .probe = prosavage_probe, + .remove = prosavage_remove, +}; + +static int __init i2c_prosavage_init(void) +{ + return pci_register_driver(&prosavage_driver); +} + +static void __exit i2c_prosavage_exit(void) +{ + pci_unregister_driver(&prosavage_driver); +} + +MODULE_DEVICE_TABLE(pci, prosavage_pci_tbl); +MODULE_AUTHOR("Henk Vergonet"); +MODULE_DESCRIPTION("ProSavage VIA 8365/8375 smbus driver"); +MODULE_LICENSE("GPL"); + +module_init (i2c_prosavage_init); +module_exit (i2c_prosavage_exit); diff --git a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c new file mode 100644 index 00000000000..9497b1b6852 --- /dev/null +++ b/drivers/i2c/busses/i2c-rpx.c @@ -0,0 +1,102 @@ +/* + * Embedded Planet RPX Lite MPC8xx CPM I2C interface. + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net). + * + * moved into proper i2c interface; + * Brad Parker (brad@heeltoe.com) + * + * RPX lite specific parts of the i2c interface + * Update: There actually isn't anything RPXLite-specific about this module. + * This should work for most any 8xx board. The console messages have been + * changed to eliminate RPXLite references. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/stddef.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-8xx.h> +#include <asm/mpc8xx.h> +#include <asm/commproc.h> + + +static void +rpx_iic_init(struct i2c_algo_8xx_data *data) +{ + volatile cpm8xx_t *cp; + volatile immap_t *immap; + + cp = cpmp; /* Get pointer to Communication Processor */ + immap = (immap_t *)IMAP_ADDR; /* and to internal registers */ + + data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; + + /* Check for and use a microcode relocation patch. + */ + if ((data->reloc = data->iip->iic_rpbase)) + data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase]; + + data->i2c = (i2c8xx_t *)&(immap->im_i2c); + data->cp = cp; + + /* Initialize Port B IIC pins. + */ + cp->cp_pbpar |= 0x00000030; + cp->cp_pbdir |= 0x00000030; + cp->cp_pbodr |= 0x00000030; + + /* Allocate space for two transmit and two receive buffer + * descriptors in the DP ram. + */ + data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8); + + /* ptr to i2c area */ + data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c); +} + +static int rpx_install_isr(int irq, void (*func)(void *, void *), void *data) +{ + /* install interrupt handler */ + cpm_install_handler(irq, (void (*)(void *, struct pt_regs *)) func, data); + + return 0; +} + +static struct i2c_algo_8xx_data rpx_data = { + .setisr = rpx_install_isr +}; + +static struct i2c_adapter rpx_ops = { + .owner = THIS_MODULE, + .name = "m8xx", + .id = I2C_HW_MPC8XX_EPON, + .algo_data = &rpx_data, +}; + +int __init i2c_rpx_init(void) +{ + printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n"); + + /* reset hardware to sane state */ + rpx_iic_init(&rpx_data); + + if (i2c_8xx_add_bus(&rpx_ops) < 0) { + printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n"); + return -ENODEV; + } + + return 0; +} + +void __exit i2c_rpx_exit(void) +{ + i2c_8xx_del_bus(&rpx_ops); +} + +MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>"); +MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards"); + +module_init(i2c_rpx_init); +module_exit(i2c_rpx_exit); diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c new file mode 100644 index 00000000000..fcfa51c1436 --- /dev/null +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -0,0 +1,938 @@ +/* linux/drivers/i2c/busses/i2c-s3c2410.c + * + * Copyright (C) 2004,2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 I2C Controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/kernel.h> +#include <linux/module.h> + +#include <linux/i2c.h> +#include <linux/i2c-id.h> +#include <linux/init.h> +#include <linux/time.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/device.h> + +#include <asm/hardware.h> +#include <asm/irq.h> +#include <asm/io.h> + +#include <asm/hardware/clock.h> +#include <asm/arch/regs-gpio.h> +#include <asm/arch/regs-iic.h> +#include <asm/arch/iic.h> + +/* i2c controller state */ + +enum s3c24xx_i2c_state { + STATE_IDLE, + STATE_START, + STATE_READ, + STATE_WRITE, + STATE_STOP +}; + +struct s3c24xx_i2c { + spinlock_t lock; + wait_queue_head_t wait; + + struct i2c_msg *msg; + unsigned int msg_num; + unsigned int msg_idx; + unsigned int msg_ptr; + + enum s3c24xx_i2c_state state; + + void __iomem *regs; + struct clk *clk; + struct device *dev; + struct resource *irq; + struct resource *ioarea; + struct i2c_adapter adap; +}; + +/* default platform data to use if not supplied in the platform_device +*/ + +static struct s3c2410_platform_i2c s3c24xx_i2c_default_platform = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 400*1000, + .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +}; + +/* s3c24xx_i2c_is2440() + * + * return true is this is an s3c2440 +*/ + +static inline int s3c24xx_i2c_is2440(struct s3c24xx_i2c *i2c) +{ + struct platform_device *pdev = to_platform_device(i2c->dev); + + return !strcmp(pdev->name, "s3c2440-i2c"); +} + + +/* s3c24xx_i2c_get_platformdata + * + * get the platform data associated with the given device, or return + * the default if there is none +*/ + +static inline struct s3c2410_platform_i2c *s3c24xx_i2c_get_platformdata(struct device *dev) +{ + if (dev->platform_data != NULL) + return (struct s3c2410_platform_i2c *)dev->platform_data; + + return &s3c24xx_i2c_default_platform; +} + +/* s3c24xx_i2c_master_complete + * + * complete the message and wake up the caller, using the given return code, + * or zero to mean ok. +*/ + +static inline void s3c24xx_i2c_master_complete(struct s3c24xx_i2c *i2c, int ret) +{ + dev_dbg(i2c->dev, "master_complete %d\n", ret); + + i2c->msg_ptr = 0; + i2c->msg = NULL; + i2c->msg_idx ++; + i2c->msg_num = 0; + if (ret) + i2c->msg_idx = ret; + + wake_up(&i2c->wait); +} + +static inline void s3c24xx_i2c_disable_ack(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp & ~S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); + +} + +static inline void s3c24xx_i2c_enable_ack(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp | S3C2410_IICCON_ACKEN, i2c->regs + S3C2410_IICCON); + +} + +/* irq enable/disable functions */ + +static inline void s3c24xx_i2c_disable_irq(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp & ~S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); +} + +static inline void s3c24xx_i2c_enable_irq(struct s3c24xx_i2c *i2c) +{ + unsigned long tmp; + + tmp = readl(i2c->regs + S3C2410_IICCON); + writel(tmp | S3C2410_IICCON_IRQEN, i2c->regs + S3C2410_IICCON); +} + + +/* s3c24xx_i2c_message_start + * + * put the start of a message onto the bus +*/ + +static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, + struct i2c_msg *msg) +{ + unsigned int addr = (msg->addr & 0x7f) << 1; + unsigned long stat; + unsigned long iiccon; + + stat = 0; + stat |= S3C2410_IICSTAT_TXRXEN; + + if (msg->flags & I2C_M_RD) { + stat |= S3C2410_IICSTAT_MASTER_RX; + addr |= 1; + } else + stat |= S3C2410_IICSTAT_MASTER_TX; + + if (msg->flags & I2C_M_REV_DIR_ADDR) + addr ^= 1; + + // todo - check for wether ack wanted or not + s3c24xx_i2c_enable_ack(i2c); + + iiccon = readl(i2c->regs + S3C2410_IICCON); + writel(stat, i2c->regs + S3C2410_IICSTAT); + + dev_dbg(i2c->dev, "START: %08lx to IICSTAT, %02x to DS\n", stat, addr); + writeb(addr, i2c->regs + S3C2410_IICDS); + + // delay a bit and reset iiccon before setting start (per samsung) + udelay(1); + dev_dbg(i2c->dev, "iiccon, %08lx\n", iiccon); + writel(iiccon, i2c->regs + S3C2410_IICCON); + + stat |= S3C2410_IICSTAT_START; + writel(stat, i2c->regs + S3C2410_IICSTAT); +} + +static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) +{ + unsigned long iicstat = readl(i2c->regs + S3C2410_IICSTAT); + + dev_dbg(i2c->dev, "STOP\n"); + + /* stop the transfer */ + iicstat &= ~ S3C2410_IICSTAT_START; + writel(iicstat, i2c->regs + S3C2410_IICSTAT); + + i2c->state = STATE_STOP; + + s3c24xx_i2c_master_complete(i2c, ret); + s3c24xx_i2c_disable_irq(i2c); +} + +/* helper functions to determine the current state in the set of + * messages we are sending */ + +/* is_lastmsg() + * + * returns TRUE if the current message is the last in the set +*/ + +static inline int is_lastmsg(struct s3c24xx_i2c *i2c) +{ + return i2c->msg_idx >= (i2c->msg_num - 1); +} + +/* is_msglast + * + * returns TRUE if we this is the last byte in the current message +*/ + +static inline int is_msglast(struct s3c24xx_i2c *i2c) +{ + return i2c->msg_ptr == i2c->msg->len-1; +} + +/* is_msgend + * + * returns TRUE if we reached the end of the current message +*/ + +static inline int is_msgend(struct s3c24xx_i2c *i2c) +{ + return i2c->msg_ptr >= i2c->msg->len; +} + +/* i2s_s3c_irq_nextbyte + * + * process an interrupt and work out what to do + */ + +static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) +{ + unsigned long tmp; + unsigned char byte; + int ret = 0; + + switch (i2c->state) { + + case STATE_IDLE: + dev_err(i2c->dev, "%s: called in STATE_IDLE\n", __FUNCTION__); + goto out; + break; + + case STATE_STOP: + dev_err(i2c->dev, "%s: called in STATE_STOP\n", __FUNCTION__); + s3c24xx_i2c_disable_irq(i2c); + goto out_ack; + + case STATE_START: + /* last thing we did was send a start condition on the + * bus, or started a new i2c message + */ + + if (iicstat & S3C2410_IICSTAT_LASTBIT && + !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { + /* ack was not received... */ + + dev_dbg(i2c->dev, "ack was not received\n"); + s3c24xx_i2c_stop(i2c, -EREMOTEIO); + goto out_ack; + } + + if (i2c->msg->flags & I2C_M_RD) + i2c->state = STATE_READ; + else + i2c->state = STATE_WRITE; + + /* terminate the transfer if there is nothing to do + * (used by the i2c probe to find devices */ + + if (is_lastmsg(i2c) && i2c->msg->len == 0) { + s3c24xx_i2c_stop(i2c, 0); + goto out_ack; + } + + if (i2c->state == STATE_READ) + goto prepare_read; + + /* fall through to the write state, as we will need to + * send a byte as well */ + + case STATE_WRITE: + /* we are writing data to the device... check for the + * end of the message, and if so, work out what to do + */ + + retry_write: + if (!is_msgend(i2c)) { + byte = i2c->msg->buf[i2c->msg_ptr++]; + writeb(byte, i2c->regs + S3C2410_IICDS); + + } else if (!is_lastmsg(i2c)) { + /* we need to go to the next i2c message */ + + dev_dbg(i2c->dev, "WRITE: Next Message\n"); + + i2c->msg_ptr = 0; + i2c->msg_idx ++; + i2c->msg++; + + /* check to see if we need to do another message */ + if (i2c->msg->flags & I2C_M_NOSTART) { + + if (i2c->msg->flags & I2C_M_RD) { + /* cannot do this, the controller + * forces us to send a new START + * when we change direction */ + + s3c24xx_i2c_stop(i2c, -EINVAL); + } + + goto retry_write; + } else { + + /* send the new start */ + s3c24xx_i2c_message_start(i2c, i2c->msg); + i2c->state = STATE_START; + } + + } else { + /* send stop */ + + s3c24xx_i2c_stop(i2c, 0); + } + break; + + case STATE_READ: + /* we have a byte of data in the data register, do + * something with it, and then work out wether we are + * going to do any more read/write + */ + + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) && + !(is_msglast(i2c) && is_lastmsg(i2c))) { + + if (iicstat & S3C2410_IICSTAT_LASTBIT) { + dev_dbg(i2c->dev, "READ: No Ack\n"); + + s3c24xx_i2c_stop(i2c, -ECONNREFUSED); + goto out_ack; + } + } + + byte = readb(i2c->regs + S3C2410_IICDS); + i2c->msg->buf[i2c->msg_ptr++] = byte; + + prepare_read: + if (is_msglast(i2c)) { + /* last byte of buffer */ + + if (is_lastmsg(i2c)) + s3c24xx_i2c_disable_ack(i2c); + + } else if (is_msgend(i2c)) { + /* ok, we've read the entire buffer, see if there + * is anything else we need to do */ + + if (is_lastmsg(i2c)) { + /* last message, send stop and complete */ + dev_dbg(i2c->dev, "READ: Send Stop\n"); + + s3c24xx_i2c_stop(i2c, 0); + } else { + /* go to the next transfer */ + dev_dbg(i2c->dev, "READ: Next Transfer\n"); + + i2c->msg_ptr = 0; + i2c->msg_idx++; + i2c->msg++; + } + } + + break; + } + + /* acknowlegde the IRQ and get back on with the work */ + + out_ack: + tmp = readl(i2c->regs + S3C2410_IICCON); + tmp &= ~S3C2410_IICCON_IRQPEND; + writel(tmp, i2c->regs + S3C2410_IICCON); + out: + return ret; +} + +/* s3c24xx_i2c_irq + * + * top level IRQ servicing routine +*/ + +static irqreturn_t s3c24xx_i2c_irq(int irqno, void *dev_id, + struct pt_regs *regs) +{ + struct s3c24xx_i2c *i2c = dev_id; + unsigned long status; + unsigned long tmp; + + status = readl(i2c->regs + S3C2410_IICSTAT); + + if (status & S3C2410_IICSTAT_ARBITR) { + // deal with arbitration loss + dev_err(i2c->dev, "deal with arbitration loss\n"); + } + + if (i2c->state == STATE_IDLE) { + dev_dbg(i2c->dev, "IRQ: error i2c->state == IDLE\n"); + + tmp = readl(i2c->regs + S3C2410_IICCON); + tmp &= ~S3C2410_IICCON_IRQPEND; + writel(tmp, i2c->regs + S3C2410_IICCON); + goto out; + } + + /* pretty much this leaves us with the fact that we've + * transmitted or received whatever byte we last sent */ + + i2s_s3c_irq_nextbyte(i2c, status); + + out: + return IRQ_HANDLED; +} + + +/* s3c24xx_i2c_set_master + * + * get the i2c bus for a master transaction +*/ + +static int s3c24xx_i2c_set_master(struct s3c24xx_i2c *i2c) +{ + unsigned long iicstat; + int timeout = 400; + + while (timeout-- > 0) { + iicstat = readl(i2c->regs + S3C2410_IICSTAT); + + if (!(iicstat & S3C2410_IICSTAT_BUSBUSY)) + return 0; + + msleep(1); + } + + dev_dbg(i2c->dev, "timeout: GPEDAT is %08x\n", + __raw_readl(S3C2410_GPEDAT)); + + return -ETIMEDOUT; +} + +/* s3c24xx_i2c_doxfer + * + * this starts an i2c transfer +*/ + +static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num) +{ + unsigned long timeout; + int ret; + + ret = s3c24xx_i2c_set_master(i2c); + if (ret != 0) { + dev_err(i2c->dev, "cannot get bus (error %d)\n", ret); + ret = -EAGAIN; + goto out; + } + + spin_lock_irq(&i2c->lock); + + i2c->msg = msgs; + i2c->msg_num = num; + i2c->msg_ptr = 0; + i2c->msg_idx = 0; + i2c->state = STATE_START; + + s3c24xx_i2c_enable_irq(i2c); + s3c24xx_i2c_message_start(i2c, msgs); + spin_unlock_irq(&i2c->lock); + + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); + + ret = i2c->msg_idx; + + /* having these next two as dev_err() makes life very + * noisy when doing an i2cdetect */ + + if (timeout == 0) + dev_dbg(i2c->dev, "timeout\n"); + else if (ret != num) + dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); + + /* ensure the stop has been through the bus */ + + msleep(1); + + out: + return ret; +} + +/* s3c24xx_i2c_xfer + * + * first port of call from the i2c bus code when an message needs + * transfering across the i2c bus. +*/ + +static int s3c24xx_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, int num) +{ + struct s3c24xx_i2c *i2c = (struct s3c24xx_i2c *)adap->algo_data; + int retry; + int ret; + + for (retry = 0; retry < adap->retries; retry++) { + + ret = s3c24xx_i2c_doxfer(i2c, msgs, num); + + if (ret != -EAGAIN) + return ret; + + dev_dbg(i2c->dev, "Retrying transmission (%d)\n", retry); + + udelay(100); + } + + return -EREMOTEIO; +} + +/* declare our i2c functionality */ +static u32 s3c24xx_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_PROTOCOL_MANGLING; +} + +/* i2c bus registration info */ + +static struct i2c_algorithm s3c24xx_i2c_algorithm = { + .name = "S3C2410-I2C-Algorithm", + .master_xfer = s3c24xx_i2c_xfer, + .functionality = s3c24xx_i2c_func, +}; + +static struct s3c24xx_i2c s3c24xx_i2c = { + .lock = SPIN_LOCK_UNLOCKED, + .wait = __WAIT_QUEUE_HEAD_INITIALIZER(s3c24xx_i2c.wait), + .adap = { + .name = "s3c2410-i2c", + .owner = THIS_MODULE, + .algo = &s3c24xx_i2c_algorithm, + .retries = 2, + .class = I2C_CLASS_HWMON, + }, +}; + +/* s3c24xx_i2c_calcdivisor + * + * return the divisor settings for a given frequency +*/ + +static int s3c24xx_i2c_calcdivisor(unsigned long clkin, unsigned int wanted, + unsigned int *div1, unsigned int *divs) +{ + unsigned int calc_divs = clkin / wanted; + unsigned int calc_div1; + + if (calc_divs > (16*16)) + calc_div1 = 512; + else + calc_div1 = 16; + + calc_divs += calc_div1-1; + calc_divs /= calc_div1; + + if (calc_divs == 0) + calc_divs = 1; + if (calc_divs > 17) + calc_divs = 17; + + *divs = calc_divs; + *div1 = calc_div1; + + return clkin / (calc_divs * calc_div1); +} + +/* freq_acceptable + * + * test wether a frequency is within the acceptable range of error +*/ + +static inline int freq_acceptable(unsigned int freq, unsigned int wanted) +{ + int diff = freq - wanted; + + return (diff >= -2 && diff <= 2); +} + +/* s3c24xx_i2c_getdivisor + * + * work out a divisor for the user requested frequency setting, + * either by the requested frequency, or scanning the acceptable + * range of frequencies until something is found +*/ + +static int s3c24xx_i2c_getdivisor(struct s3c24xx_i2c *i2c, + struct s3c2410_platform_i2c *pdata, + unsigned long *iicon, + unsigned int *got) +{ + unsigned long clkin = clk_get_rate(i2c->clk); + + unsigned int divs, div1; + int freq; + int start, end; + + clkin /= 1000; /* clkin now in KHz */ + + dev_dbg(i2c->dev, "pdata %p, freq %lu %lu..%lu\n", + pdata, pdata->bus_freq, pdata->min_freq, pdata->max_freq); + + if (pdata->bus_freq != 0) { + freq = s3c24xx_i2c_calcdivisor(clkin, pdata->bus_freq/1000, + &div1, &divs); + if (freq_acceptable(freq, pdata->bus_freq/1000)) + goto found; + } + + /* ok, we may have to search for something suitable... */ + + start = (pdata->max_freq == 0) ? pdata->bus_freq : pdata->max_freq; + end = pdata->min_freq; + + start /= 1000; + end /= 1000; + + /* search loop... */ + + for (; start > end; start--) { + freq = s3c24xx_i2c_calcdivisor(clkin, start, &div1, &divs); + if (freq_acceptable(freq, start)) + goto found; + } + + /* cannot find frequency spec */ + + return -EINVAL; + + found: + *got = freq; + *iicon |= (divs-1); + *iicon |= (div1 == 512) ? S3C2410_IICCON_TXDIV_512 : 0; + return 0; +} + +/* s3c24xx_i2c_init + * + * initialise the controller, set the IO lines and frequency +*/ + +static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c) +{ + unsigned long iicon = S3C2410_IICCON_IRQEN | S3C2410_IICCON_ACKEN; + struct s3c2410_platform_i2c *pdata; + unsigned int freq; + + /* get the plafrom data */ + + pdata = s3c24xx_i2c_get_platformdata(i2c->adap.dev.parent); + + /* inititalise the gpio */ + + s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); + s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); + + /* write slave address */ + + writeb(pdata->slave_addr, i2c->regs + S3C2410_IICADD); + + dev_info(i2c->dev, "slave address 0x%02x\n", pdata->slave_addr); + + /* we need to work out the divisors for the clock... */ + + if (s3c24xx_i2c_getdivisor(i2c, pdata, &iicon, &freq) != 0) { + dev_err(i2c->dev, "cannot meet bus frequency required\n"); + return -EINVAL; + } + + /* todo - check that the i2c lines aren't being dragged anywhere */ + + dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq); + dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon); + + writel(iicon, i2c->regs + S3C2410_IICCON); + + /* check for s3c2440 i2c controller */ + + if (s3c24xx_i2c_is2440(i2c)) { + dev_dbg(i2c->dev, "S3C2440_IICLC=%08x\n", pdata->sda_delay); + + writel(pdata->sda_delay, i2c->regs + S3C2440_IICLC); + } + + return 0; +} + +static void s3c24xx_i2c_free(struct s3c24xx_i2c *i2c) +{ + if (i2c->clk != NULL && !IS_ERR(i2c->clk)) { + clk_disable(i2c->clk); + clk_unuse(i2c->clk); + clk_put(i2c->clk); + i2c->clk = NULL; + } + + if (i2c->regs != NULL) { + iounmap(i2c->regs); + i2c->regs = NULL; + } + + if (i2c->ioarea != NULL) { + release_resource(i2c->ioarea); + kfree(i2c->ioarea); + i2c->ioarea = NULL; + } +} + +/* s3c24xx_i2c_probe + * + * called by the bus driver when a suitable device is found +*/ + +static int s3c24xx_i2c_probe(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct s3c24xx_i2c *i2c = &s3c24xx_i2c; + struct resource *res; + int ret; + + /* find the clock and enable it */ + + i2c->dev = dev; + i2c->clk = clk_get(dev, "i2c"); + if (IS_ERR(i2c->clk)) { + dev_err(dev, "cannot get clock\n"); + ret = -ENOENT; + goto out; + } + + dev_dbg(dev, "clock source %p\n", i2c->clk); + + clk_use(i2c->clk); + clk_enable(i2c->clk); + + /* map the registers */ + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(dev, "cannot find IO resource\n"); + ret = -ENOENT; + goto out; + } + + i2c->ioarea = request_mem_region(res->start, (res->end-res->start)+1, + pdev->name); + + if (i2c->ioarea == NULL) { + dev_err(dev, "cannot request IO\n"); + ret = -ENXIO; + goto out; + } + + i2c->regs = ioremap(res->start, (res->end-res->start)+1); + + if (i2c->regs == NULL) { + dev_err(dev, "cannot map IO\n"); + ret = -ENXIO; + goto out; + } + + dev_dbg(dev, "registers %p (%p, %p)\n", i2c->regs, i2c->ioarea, res); + + /* setup info block for the i2c core */ + + i2c->adap.algo_data = i2c; + i2c->adap.dev.parent = dev; + + /* initialise the i2c controller */ + + ret = s3c24xx_i2c_init(i2c); + if (ret != 0) + goto out; + + /* find the IRQ for this unit (note, this relies on the init call to + * ensure no current IRQs pending + */ + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res == NULL) { + dev_err(dev, "cannot find IRQ\n"); + ret = -ENOENT; + goto out; + } + + ret = request_irq(res->start, s3c24xx_i2c_irq, SA_INTERRUPT, + pdev->name, i2c); + + if (ret != 0) { + dev_err(dev, "cannot claim IRQ\n"); + goto out; + } + + i2c->irq = res; + + dev_dbg(dev, "irq resource %p (%ld)\n", res, res->start); + + ret = i2c_add_adapter(&i2c->adap); + if (ret < 0) { + dev_err(dev, "failed to add bus to i2c core\n"); + goto out; + } + + dev_set_drvdata(dev, i2c); + + dev_info(dev, "%s: S3C I2C adapter\n", i2c->adap.dev.bus_id); + + out: + if (ret < 0) + s3c24xx_i2c_free(i2c); + + return ret; +} + +/* s3c24xx_i2c_remove + * + * called when device is removed from the bus +*/ + +static int s3c24xx_i2c_remove(struct device *dev) +{ + struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); + + if (i2c != NULL) { + s3c24xx_i2c_free(i2c); + dev_set_drvdata(dev, NULL); + } + + return 0; +} + +#ifdef CONFIG_PM +static int s3c24xx_i2c_resume(struct device *dev, u32 level) +{ + struct s3c24xx_i2c *i2c = dev_get_drvdata(dev); + + if (i2c != NULL && level == RESUME_ENABLE) { + dev_dbg(dev, "resume: level %d\n", level); + s3c24xx_i2c_init(i2c); + } + + return 0; +} + +#else +#define s3c24xx_i2c_resume NULL +#endif + +/* device driver for platform bus bits */ + +static struct device_driver s3c2410_i2c_driver = { + .name = "s3c2410-i2c", + .bus = &platform_bus_type, + .probe = s3c24xx_i2c_probe, + .remove = s3c24xx_i2c_remove, + .resume = s3c24xx_i2c_resume, +}; + +static struct device_driver s3c2440_i2c_driver = { + .name = "s3c2440-i2c", + .bus = &platform_bus_type, + .probe = s3c24xx_i2c_probe, + .remove = s3c24xx_i2c_remove, + .resume = s3c24xx_i2c_resume, +}; + +static int __init i2c_adap_s3c_init(void) +{ + int ret; + + ret = driver_register(&s3c2410_i2c_driver); + if (ret == 0) + ret = driver_register(&s3c2440_i2c_driver); + + return ret; +} + +static void __exit i2c_adap_s3c_exit(void) +{ + driver_unregister(&s3c2410_i2c_driver); + driver_unregister(&s3c2440_i2c_driver); +} + +module_init(i2c_adap_s3c_init); +module_exit(i2c_adap_s3c_exit); + +MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); +MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c new file mode 100644 index 00000000000..092d0323c6c --- /dev/null +++ b/drivers/i2c/busses/i2c-savage4.c @@ -0,0 +1,205 @@ +/* + i2c-savage4.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (C) 1998-2003 The LM Sensors Team + Alexander Wold <awold@bigfoot.com> + Mark D. Studebaker <mdsxyz123@yahoo.com> + + Based on i2c-voodoo3.c. + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* This interfaces to the I2C bus of the Savage4 to gain access to + the BT869 and possibly other I2C devices. The DDC bus is not + yet supported because its register is not memory-mapped. + However we leave the DDC code here, commented out, to make + it easier to add later. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* 3DFX defines */ +#define PCI_CHIP_SAVAGE3D 0x8A20 +#define PCI_CHIP_SAVAGE3D_MV 0x8A21 +#define PCI_CHIP_SAVAGE4 0x8A22 +#define PCI_CHIP_SAVAGE2000 0x9102 +#define PCI_CHIP_PROSAVAGE_PM 0x8A25 +#define PCI_CHIP_PROSAVAGE_KM 0x8A26 +#define PCI_CHIP_SAVAGE_MX_MV 0x8c10 +#define PCI_CHIP_SAVAGE_MX 0x8c11 +#define PCI_CHIP_SAVAGE_IX_MV 0x8c12 +#define PCI_CHIP_SAVAGE_IX 0x8c13 + +#define REG 0xff20 /* Serial Port 1 Register */ + +/* bit locations in the register */ +#define DDC_ENAB 0x00040000 +#define DDC_SCL_OUT 0x00080000 +#define DDC_SDA_OUT 0x00100000 +#define DDC_SCL_IN 0x00200000 +#define DDC_SDA_IN 0x00400000 +#define I2C_ENAB 0x00000020 +#define I2C_SCL_OUT 0x00000001 +#define I2C_SDA_OUT 0x00000002 +#define I2C_SCL_IN 0x00000008 +#define I2C_SDA_IN 0x00000010 + +/* initialization states */ +#define INIT2 0x20 +#define INIT3 0x04 + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +static void __iomem *ioaddr; + +/* The sav GPIO registers don't have individual masks for each bit + so we always have to read before writing. */ + +static void bit_savi2c_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if(val) + r |= I2C_SCL_OUT; + else + r &= ~I2C_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_savi2c_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if(val) + r |= I2C_SDA_OUT; + else + r &= ~I2C_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +/* The GPIO pins are open drain, so the pins always remain outputs. + We rely on the i2c-algo-bit routines to set the pins high before + reading the input from other chips. */ + +static int bit_savi2c_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SCL_IN)); +} + +static int bit_savi2c_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SDA_IN)); +} + +/* Configures the chip */ + +static int config_s4(struct pci_dev *dev) +{ + unsigned long cadr; + + /* map memory */ + cadr = dev->resource[0].start; + cadr &= PCI_BASE_ADDRESS_MEM_MASK; + ioaddr = ioremap_nocache(cadr, 0x0080000); + if (ioaddr) { + /* writel(0x8160, ioaddr + REG2); */ + writel(0x00000020, ioaddr + REG); + dev_info(&dev->dev, "Using Savage4 at %p\n", ioaddr); + return 0; + } + return -ENODEV; +} + +static struct i2c_algo_bit_data sav_i2c_bit_data = { + .setsda = bit_savi2c_setsda, + .setscl = bit_savi2c_setscl, + .getsda = bit_savi2c_getsda, + .getscl = bit_savi2c_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter savage4_i2c_adapter = { + .owner = THIS_MODULE, + .name = "I2C Savage4 adapter", + .algo_data = &sav_i2c_bit_data, +}; + +static struct pci_device_id savage4_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE4) }, + { PCI_DEVICE(PCI_VENDOR_ID_S3, PCI_CHIP_SAVAGE2000) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, savage4_ids); + +static int __devinit savage4_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + retval = config_s4(dev); + if (retval) + return retval; + + /* set up the sysfs linkage to our parent device */ + savage4_i2c_adapter.dev.parent = &dev->dev; + + return i2c_bit_add_bus(&savage4_i2c_adapter); +} + +static void __devexit savage4_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&savage4_i2c_adapter); + iounmap(ioaddr); +} + +static struct pci_driver savage4_driver = { + .name = "savage4_smbus", + .id_table = savage4_ids, + .probe = savage4_probe, + .remove = __devexit_p(savage4_remove), +}; + +static int __init i2c_savage4_init(void) +{ + return pci_register_driver(&savage4_driver); +} + +static void __exit i2c_savage4_exit(void) +{ + pci_unregister_driver(&savage4_driver); +} + +MODULE_AUTHOR("Alexander Wold <awold@bigfoot.com> " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("Savage4 I2C/SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_savage4_init); +module_exit(i2c_savage4_exit); diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c new file mode 100644 index 00000000000..e5dd90bdb04 --- /dev/null +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -0,0 +1,71 @@ +/* + * Copyright (C) 2004 Steven J. Hill + * Copyright (C) 2001,2002,2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/i2c-algo-sibyte.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_smbus.h> + +static struct i2c_algo_sibyte_data sibyte_board_data[2] = { + { NULL, 0, (void *) (KSEG1+A_SMB_BASE(0)) }, + { NULL, 1, (void *) (KSEG1+A_SMB_BASE(1)) } +}; + +static struct i2c_adapter sibyte_board_adapter[2] = { + { + .owner = THIS_MODULE, + .id = I2C_HW_SIBYTE, + .class = I2C_CLASS_HWMON, + .algo = NULL, + .algo_data = &sibyte_board_data[0], + .name = "SiByte SMBus 0", + }, + { + .owner = THIS_MODULE, + .id = I2C_HW_SIBYTE, + .class = I2C_CLASS_HWMON, + .algo = NULL, + .algo_data = &sibyte_board_data[1], + .name = "SiByte SMBus 1", + }, +}; + +static int __init i2c_sibyte_init(void) +{ + printk("i2c-swarm.o: i2c SMBus adapter module for SiByte board\n"); + if (i2c_sibyte_add_bus(&sibyte_board_adapter[0], K_SMB_FREQ_100KHZ) < 0) + return -ENODEV; + if (i2c_sibyte_add_bus(&sibyte_board_adapter[1], K_SMB_FREQ_400KHZ) < 0) + return -ENODEV; + return 0; +} + +static void __exit i2c_sibyte_exit(void) +{ + i2c_sibyte_del_bus(&sibyte_board_adapter[0]); + i2c_sibyte_del_bus(&sibyte_board_adapter[1]); +} + +module_init(i2c_sibyte_init); +module_exit(i2c_sibyte_exit); + +MODULE_AUTHOR("Kip Walker <kwalker@broadcom.com>, Steven J. Hill <sjhill@realitydiluted.com>"); +MODULE_DESCRIPTION("SMBus adapter routines for SiByte boards"); +MODULE_LICENSE("GPL"); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c new file mode 100644 index 00000000000..425733b019b --- /dev/null +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -0,0 +1,424 @@ +/* + sis5595.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and + Philip Edelbrock <phil@netroedge.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* Note: we assume there can only be one SIS5595 with one SMBus interface */ + +/* + Note: all have mfr. ID 0x1039. + SUPPORTED PCI ID + 5595 0008 + + Note: these chips contain a 0008 device which is incompatible with the + 5595. We recognize these by the presence of the listed + "blacklist" PCI ID and refuse to load. + + NOT SUPPORTED PCI ID BLACKLIST PCI ID + 540 0008 0540 + 550 0008 0550 + 5513 0008 5511 + 5581 0008 5597 + 5582 0008 5597 + 5597 0008 5597 + 5598 0008 5597/5598 + 630 0008 0630 + 645 0008 0645 + 646 0008 0646 + 648 0008 0648 + 650 0008 0650 + 651 0008 0651 + 730 0008 0730 + 735 0008 0735 + 745 0008 0745 + 746 0008 0746 +*/ + +/* TO DO: + * Add Block Transfers (ugly, but supported by the adapter) + * Add adapter resets + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <asm/io.h> + +static int blacklist[] = { + PCI_DEVICE_ID_SI_540, + PCI_DEVICE_ID_SI_550, + PCI_DEVICE_ID_SI_630, + PCI_DEVICE_ID_SI_645, + PCI_DEVICE_ID_SI_646, + PCI_DEVICE_ID_SI_648, + PCI_DEVICE_ID_SI_650, + PCI_DEVICE_ID_SI_651, + PCI_DEVICE_ID_SI_730, + PCI_DEVICE_ID_SI_735, + PCI_DEVICE_ID_SI_745, + PCI_DEVICE_ID_SI_746, + PCI_DEVICE_ID_SI_5511, /* 5513 chip has the 0008 device but that ID + shows up in other chips so we use the 5511 + ID for recognition */ + PCI_DEVICE_ID_SI_5597, + PCI_DEVICE_ID_SI_5598, + 0, /* terminates the list */ +}; + +/* Length of ISA address segment */ +#define SIS5595_EXTENT 8 +/* SIS5595 SMBus registers */ +#define SMB_STS_LO 0x00 +#define SMB_STS_HI 0x01 +#define SMB_CTL_LO 0x02 +#define SMB_CTL_HI 0x03 +#define SMB_ADDR 0x04 +#define SMB_CMD 0x05 +#define SMB_PCNT 0x06 +#define SMB_CNT 0x07 +#define SMB_BYTE 0x08 +#define SMB_DEV 0x10 +#define SMB_DB0 0x11 +#define SMB_DB1 0x12 +#define SMB_HAA 0x13 + +/* PCI Address Constants */ +#define SMB_INDEX 0x38 +#define SMB_DAT 0x39 +#define SIS5595_ENABLE_REG 0x40 +#define ACPI_BASE 0x90 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* SIS5595 constants */ +#define SIS5595_QUICK 0x00 +#define SIS5595_BYTE 0x02 +#define SIS5595_BYTE_DATA 0x04 +#define SIS5595_WORD_DATA 0x06 +#define SIS5595_PROC_CALL 0x08 +#define SIS5595_BLOCK_DATA 0x0A + +/* insmod parameters */ + +/* If force_addr is set to anything different from 0, we forcibly enable + the device at the given address. */ +static u16 force_addr = 0; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"); + +static unsigned short sis5595_base = 0; + +static u8 sis5595_read(u8 reg) +{ + outb(reg, sis5595_base + SMB_INDEX); + return inb(sis5595_base + SMB_DAT); +} + +static void sis5595_write(u8 reg, u8 data) +{ + outb(reg, sis5595_base + SMB_INDEX); + outb(data, sis5595_base + SMB_DAT); +} + +static int sis5595_setup(struct pci_dev *SIS5595_dev) +{ + u16 a; + u8 val; + int *i; + int retval = -ENODEV; + + /* Look for imposters */ + for (i = blacklist; *i != 0; i++) { + struct pci_dev *dev; + dev = pci_get_device(PCI_VENDOR_ID_SI, *i, NULL); + if (dev) { + dev_err(&SIS5595_dev->dev, "Looked for SIS5595 but found unsupported device %.4x\n", *i); + pci_dev_put(dev); + return -ENODEV; + } + } + + /* Determine the address of the SMBus areas */ + pci_read_config_word(SIS5595_dev, ACPI_BASE, &sis5595_base); + if (sis5595_base == 0 && force_addr == 0) { + dev_err(&SIS5595_dev->dev, "ACPI base address uninitialized - upgrade BIOS or use force_addr=0xaddr\n"); + return -ENODEV; + } + + if (force_addr) + sis5595_base = force_addr & ~(SIS5595_EXTENT - 1); + dev_dbg(&SIS5595_dev->dev, "ACPI Base address: %04x\n", sis5595_base); + + /* NB: We grab just the two SMBus registers here, but this may still + * interfere with ACPI :-( */ + if (!request_region(sis5595_base + SMB_INDEX, 2, "sis5595-smbus")) { + dev_err(&SIS5595_dev->dev, "SMBus registers 0x%04x-0x%04x already in use!\n", + sis5595_base + SMB_INDEX, sis5595_base + SMB_INDEX + 1); + return -ENODEV; + } + + if (force_addr) { + dev_info(&SIS5595_dev->dev, "forcing ISA address 0x%04X\n", sis5595_base); + if (pci_write_config_word(SIS5595_dev, ACPI_BASE, sis5595_base) + != PCIBIOS_SUCCESSFUL) + goto error; + if (pci_read_config_word(SIS5595_dev, ACPI_BASE, &a) + != PCIBIOS_SUCCESSFUL) + goto error; + if ((a & ~(SIS5595_EXTENT - 1)) != sis5595_base) { + /* doesn't work for some chips! */ + dev_err(&SIS5595_dev->dev, "force address failed - not supported?\n"); + goto error; + } + } + + if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) + != PCIBIOS_SUCCESSFUL) + goto error; + if ((val & 0x80) == 0) { + dev_info(&SIS5595_dev->dev, "enabling ACPI\n"); + if (pci_write_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, val | 0x80) + != PCIBIOS_SUCCESSFUL) + goto error; + if (pci_read_config_byte(SIS5595_dev, SIS5595_ENABLE_REG, &val) + != PCIBIOS_SUCCESSFUL) + goto error; + if ((val & 0x80) == 0) { + /* doesn't work for some chips? */ + dev_err(&SIS5595_dev->dev, "ACPI enable failed - not supported?\n"); + goto error; + } + } + + /* Everything is happy */ + return 0; + +error: + release_region(sis5595_base + SMB_INDEX, 2); + return retval; +} + +static int sis5595_transaction(struct i2c_adapter *adap) +{ + int temp; + int result = 0; + int timeout = 0; + + /* Make sure the SMBus host is ready to start transmitting */ + temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); + if (temp != 0x00) { + dev_dbg(&adap->dev, "SMBus busy (%04x). Resetting... \n", temp); + sis5595_write(SMB_STS_LO, temp & 0xff); + sis5595_write(SMB_STS_HI, temp >> 8); + if ((temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8)) != 0x00) { + dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); + return -1; + } else { + dev_dbg(&adap->dev, "Successfull!\n"); + } + } + + /* start the transaction by setting bit 4 */ + sis5595_write(SMB_CTL_LO, sis5595_read(SMB_CTL_LO) | 0x10); + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = sis5595_read(SMB_STS_LO); + } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&adap->dev, "SMBus Timeout!\n"); + result = -1; + } + + if (temp & 0x10) { + dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); + result = -1; + } + + if (temp & 0x20) { + dev_err(&adap->dev, "Bus collision! SMBus may be locked until " + "next hard reset (or not...)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + result = -1; + } + + temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); + if (temp != 0x00) { + sis5595_write(SMB_STS_LO, temp & 0xff); + sis5595_write(SMB_STS_HI, temp >> 8); + } + + temp = sis5595_read(SMB_STS_LO) + (sis5595_read(SMB_STS_HI) << 8); + if (temp != 0x00) + dev_dbg(&adap->dev, "Failed reset at end of transaction (%02x)\n", temp); + + return result; +} + +/* Return -1 on error. */ +static s32 sis5595_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + switch (size) { + case I2C_SMBUS_QUICK: + sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + size = SIS5595_QUICK; + break; + case I2C_SMBUS_BYTE: + sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + if (read_write == I2C_SMBUS_WRITE) + sis5595_write(SMB_CMD, command); + size = SIS5595_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis5595_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) + sis5595_write(SMB_BYTE, data->byte); + size = SIS5595_BYTE_DATA; + break; + case I2C_SMBUS_PROC_CALL: + case I2C_SMBUS_WORD_DATA: + sis5595_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis5595_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + sis5595_write(SMB_BYTE, data->word & 0xff); + sis5595_write(SMB_BYTE + 1, + (data->word & 0xff00) >> 8); + } + size = (size == I2C_SMBUS_PROC_CALL) ? SIS5595_PROC_CALL : SIS5595_WORD_DATA; + break; +/* + case I2C_SMBUS_BLOCK_DATA: + printk(KERN_WARNING "sis5595.o: Block data not yet implemented!\n"); + return -1; + break; +*/ + default: + printk(KERN_WARNING "sis5595.o: Unsupported transaction %d\n", size); + return -1; + } + + sis5595_write(SMB_CTL_LO, ((size & 0x0E))); + + if (sis5595_transaction(adap)) + return -1; + + if ((size != SIS5595_PROC_CALL) && + ((read_write == I2C_SMBUS_WRITE) || (size == SIS5595_QUICK))) + return 0; + + + switch (size) { + case SIS5595_BYTE: /* Where is the result put? I assume here it is in + SMB_DATA but it might just as well be in the + SMB_CMD. No clue in the docs */ + case SIS5595_BYTE_DATA: + data->byte = sis5595_read(SMB_BYTE); + break; + case SIS5595_WORD_DATA: + case SIS5595_PROC_CALL: + data->word = sis5595_read(SMB_BYTE) + (sis5595_read(SMB_BYTE + 1) << 8); + break; + } + return 0; +} + +static u32 sis5595_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_PROC_CALL; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = sis5595_access, + .functionality = sis5595_func, +}; + +static struct i2c_adapter sis5595_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .name = "unset", + .algo = &smbus_algorithm, +}; + +static struct pci_device_id sis5595_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, sis5595_ids); + +static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + if (sis5595_setup(dev)) { + dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n"); + return -ENODEV; + } + + /* set up the driverfs linkage to our parent device */ + sis5595_adapter.dev.parent = &dev->dev; + + sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x", + sis5595_base + SMB_INDEX); + return i2c_add_adapter(&sis5595_adapter); +} + +static void __devexit sis5595_remove(struct pci_dev *dev) +{ + i2c_del_adapter(&sis5595_adapter); + release_region(sis5595_base + SMB_INDEX, 2); +} + +static struct pci_driver sis5595_driver = { + .name = "sis5595_smbus", + .id_table = sis5595_ids, + .probe = sis5595_probe, + .remove = __devexit_p(sis5595_remove), +}; + +static int __init i2c_sis5595_init(void) +{ + return pci_register_driver(&sis5595_driver); +} + +static void __exit i2c_sis5595_exit(void) +{ + pci_unregister_driver(&sis5595_driver); +} + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>"); +MODULE_DESCRIPTION("SIS5595 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_sis5595_init); +module_exit(i2c_sis5595_exit); diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c new file mode 100644 index 00000000000..58df63df154 --- /dev/null +++ b/drivers/i2c/busses/i2c-sis630.c @@ -0,0 +1,523 @@ +/* + i2c-sis630.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (c) 2002,2003 Alexander Malysh <amalysh@web.de> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Changes: + 24.08.2002 + Fixed the typo in sis630_access (Thanks to Mark M. Hoffman) + Changed sis630_transaction.(Thanks to Mark M. Hoffman) + 18.09.2002 + Added SIS730 as supported. + 21.09.2002 + Added high_clock module option.If this option is set + used Host Master Clock 56KHz (default 14KHz).For now we save old Host + Master Clock and after transaction completed restore (otherwise + it's confuse BIOS and hung Machine). + 24.09.2002 + Fixed typo in sis630_access + Fixed logical error by restoring of Host Master Clock + 31.07.2003 + Added block data read/write support. +*/ + +/* + Status: beta + + Supports: + SIS 630 + SIS 730 + + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <asm/io.h> + +/* SIS630 SMBus registers */ +#define SMB_STS 0x80 /* status */ +#define SMB_EN 0x81 /* status enable */ +#define SMB_CNT 0x82 +#define SMBHOST_CNT 0x83 +#define SMB_ADDR 0x84 +#define SMB_CMD 0x85 +#define SMB_PCOUNT 0x86 /* processed count */ +#define SMB_COUNT 0x87 +#define SMB_BYTE 0x88 /* ~0x8F data byte field */ +#define SMBDEV_ADDR 0x90 +#define SMB_DB0 0x91 +#define SMB_DB1 0x92 +#define SMB_SAA 0x93 + +/* register count for request_region */ +#define SIS630_SMB_IOREGION 20 + +/* PCI address constants */ +/* acpi base address register */ +#define SIS630_ACPI_BASE_REG 0x74 +/* bios control register */ +#define SIS630_BIOS_CTL_REG 0x40 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* SIS630 constants */ +#define SIS630_QUICK 0x00 +#define SIS630_BYTE 0x01 +#define SIS630_BYTE_DATA 0x02 +#define SIS630_WORD_DATA 0x03 +#define SIS630_PCALL 0x04 +#define SIS630_BLOCK_DATA 0x05 + +/* insmod parameters */ +static int high_clock; +static int force; +module_param(high_clock, bool, 0); +MODULE_PARM_DESC(high_clock, "Set Host Master Clock to 56KHz (default 14KHz)."); +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Forcibly enable the SIS630. DANGEROUS!"); + +/* acpi base address */ +static unsigned short acpi_base = 0; + +/* supported chips */ +static int supported[] = { + PCI_DEVICE_ID_SI_630, + PCI_DEVICE_ID_SI_730, + 0 /* terminates the list */ +}; + +static inline u8 sis630_read(u8 reg) +{ + return inb(acpi_base + reg); +} + +static inline void sis630_write(u8 reg, u8 data) +{ + outb(data, acpi_base + reg); +} + +static int sis630_transaction_start(struct i2c_adapter *adap, int size, u8 *oldclock) +{ + int temp; + + /* Make sure the SMBus host is ready to start transmitting. */ + if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) { + dev_dbg(&adap->dev, "SMBus busy (%02x).Resetting...\n",temp); + /* kill smbus transaction */ + sis630_write(SMBHOST_CNT, 0x20); + + if ((temp = sis630_read(SMB_CNT) & 0x03) != 0x00) { + dev_dbg(&adap->dev, "Failed! (%02x)\n", temp); + return -1; + } else { + dev_dbg(&adap->dev, "Successfull!\n"); + } + } + + /* save old clock, so we can prevent machine for hung */ + *oldclock = sis630_read(SMB_CNT); + + dev_dbg(&adap->dev, "saved clock 0x%02x\n", *oldclock); + + /* disable timeout interrupt , set Host Master Clock to 56KHz if requested */ + if (high_clock) + sis630_write(SMB_CNT, 0x20); + else + sis630_write(SMB_CNT, (*oldclock & ~0x40)); + + /* clear all sticky bits */ + temp = sis630_read(SMB_STS); + sis630_write(SMB_STS, temp & 0x1e); + + /* start the transaction by setting bit 4 and size */ + sis630_write(SMBHOST_CNT,0x10 | (size & 0x07)); + + return 0; +} + +static int sis630_transaction_wait(struct i2c_adapter *adap, int size) +{ + int temp, result = 0, timeout = 0; + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = sis630_read(SMB_STS); + /* check if block transmitted */ + if (size == SIS630_BLOCK_DATA && (temp & 0x10)) + break; + } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&adap->dev, "SMBus Timeout!\n"); + result = -1; + } + + if (temp & 0x02) { + dev_dbg(&adap->dev, "Error: Failed bus transaction\n"); + result = -1; + } + + if (temp & 0x04) { + dev_err(&adap->dev, "Bus collision!\n"); + result = -1; + /* + TBD: Datasheet say: + the software should clear this bit and restart SMBUS operation. + Should we do it or user start request again? + */ + } + + return result; +} + +static void sis630_transaction_end(struct i2c_adapter *adap, u8 oldclock) +{ + int temp = 0; + + /* clear all status "sticky" bits */ + sis630_write(SMB_STS, temp); + + dev_dbg(&adap->dev, "SMB_CNT before clock restore 0x%02x\n", sis630_read(SMB_CNT)); + + /* + * restore old Host Master Clock if high_clock is set + * and oldclock was not 56KHz + */ + if (high_clock && !(oldclock & 0x20)) + sis630_write(SMB_CNT,(sis630_read(SMB_CNT) & ~0x20)); + + dev_dbg(&adap->dev, "SMB_CNT after clock restore 0x%02x\n", sis630_read(SMB_CNT)); +} + +static int sis630_transaction(struct i2c_adapter *adap, int size) +{ + int result = 0; + u8 oldclock = 0; + + result = sis630_transaction_start(adap, size, &oldclock); + if (!result) { + result = sis630_transaction_wait(adap, size); + sis630_transaction_end(adap, oldclock); + } + + return result; +} + +static int sis630_block_data(struct i2c_adapter *adap, union i2c_smbus_data *data, int read_write) +{ + int i, len = 0, rc = 0; + u8 oldclock = 0; + + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + else if (len > 32) + len = 32; + sis630_write(SMB_COUNT, len); + for (i=1; i <= len; i++) { + dev_dbg(&adap->dev, "set data 0x%02x\n", data->block[i]); + /* set data */ + sis630_write(SMB_BYTE+(i-1)%8, data->block[i]); + if (i==8 || (len<8 && i==len)) { + dev_dbg(&adap->dev, "start trans len=%d i=%d\n",len ,i); + /* first transaction */ + if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) + return -1; + } + else if ((i-1)%8 == 7 || i==len) { + dev_dbg(&adap->dev, "trans_wait len=%d i=%d\n",len,i); + if (i>8) { + dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i); + /* + If this is not first transaction, + we must clear sticky bit. + clear SMBARY_STS + */ + sis630_write(SMB_STS,0x10); + } + if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + dev_dbg(&adap->dev, "trans_wait failed\n"); + rc = -1; + break; + } + } + } + } + else { + /* read request */ + data->block[0] = len = 0; + if (sis630_transaction_start(adap, SIS630_BLOCK_DATA, &oldclock)) { + return -1; + } + do { + if (sis630_transaction_wait(adap, SIS630_BLOCK_DATA)) { + dev_dbg(&adap->dev, "trans_wait failed\n"); + rc = -1; + break; + } + /* if this first transaction then read byte count */ + if (len == 0) + data->block[0] = sis630_read(SMB_COUNT); + + /* just to be sure */ + if (data->block[0] > 32) + data->block[0] = 32; + + dev_dbg(&adap->dev, "block data read len=0x%x\n", data->block[0]); + + for (i=0; i < 8 && len < data->block[0]; i++,len++) { + dev_dbg(&adap->dev, "read i=%d len=%d\n", i, len); + data->block[len+1] = sis630_read(SMB_BYTE+i); + } + + dev_dbg(&adap->dev, "clear smbary_sts len=%d i=%d\n",len,i); + + /* clear SMBARY_STS */ + sis630_write(SMB_STS,0x10); + } while(len < data->block[0]); + } + + sis630_transaction_end(adap, oldclock); + + return rc; +} + +/* Return -1 on error. */ +static s32 sis630_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data) +{ + switch (size) { + case I2C_SMBUS_QUICK: + sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + size = SIS630_QUICK; + break; + case I2C_SMBUS_BYTE: + sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + if (read_write == I2C_SMBUS_WRITE) + sis630_write(SMB_CMD, command); + size = SIS630_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + sis630_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) + sis630_write(SMB_BYTE, data->byte); + size = SIS630_BYTE_DATA; + break; + case I2C_SMBUS_PROC_CALL: + case I2C_SMBUS_WORD_DATA: + sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + sis630_write(SMB_BYTE, data->word & 0xff); + sis630_write(SMB_BYTE + 1,(data->word & 0xff00) >> 8); + } + size = (size == I2C_SMBUS_PROC_CALL ? SIS630_PCALL : SIS630_WORD_DATA); + break; + case I2C_SMBUS_BLOCK_DATA: + sis630_write(SMB_ADDR,((addr & 0x7f) << 1) | (read_write & 0x01)); + sis630_write(SMB_CMD, command); + size = SIS630_BLOCK_DATA; + return sis630_block_data(adap, data, read_write); + default: + printk("Unsupported I2C size\n"); + return -1; + break; + } + + if (sis630_transaction(adap, size)) + return -1; + + if ((size != SIS630_PCALL) && + ((read_write == I2C_SMBUS_WRITE) || (size == SIS630_QUICK))) { + return 0; + } + + switch(size) { + case SIS630_BYTE: + case SIS630_BYTE_DATA: + data->byte = sis630_read(SMB_BYTE); + break; + case SIS630_PCALL: + case SIS630_WORD_DATA: + data->word = sis630_read(SMB_BYTE) + (sis630_read(SMB_BYTE + 1) << 8); + break; + default: + return -1; + break; + } + + return 0; +} + +static u32 sis630_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static int sis630_setup(struct pci_dev *sis630_dev) +{ + unsigned char b; + struct pci_dev *dummy = NULL; + int retval = -ENODEV, i; + + /* check for supported SiS devices */ + for (i=0; supported[i] > 0 ; i++) { + if ((dummy = pci_get_device(PCI_VENDOR_ID_SI, supported[i], dummy))) + break; /* found */ + } + + if (dummy) { + pci_dev_put(dummy); + } + else if (force) { + dev_err(&sis630_dev->dev, "WARNING: Can't detect SIS630 compatible device, but " + "loading because of force option enabled\n"); + } + else { + return -ENODEV; + } + + /* + Enable ACPI first , so we can accsess reg 74-75 + in acpi io space and read acpi base addr + */ + if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) { + dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n"); + goto exit; + } + /* if ACPI already enabled , do nothing */ + if (!(b & 0x80) && + pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) { + dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n"); + goto exit; + } + + /* Determine the ACPI base address */ + if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) { + dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n"); + goto exit; + } + + dev_dbg(&sis630_dev->dev, "ACPI base at 0x%04x\n", acpi_base); + + /* Everything is happy, let's grab the memory and set things up. */ + if (!request_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION, "sis630-smbus")) { + dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already " + "in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA); + goto exit; + } + + retval = 0; + +exit: + if (retval) + acpi_base = 0; + return retval; +} + + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = sis630_access, + .functionality = sis630_func, +}; + +static struct i2c_adapter sis630_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .name = "unset", + .algo = &smbus_algorithm, +}; + +static struct pci_device_id sis630_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503) }, + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, sis630_ids); + +static int __devinit sis630_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + if (sis630_setup(dev)) { + dev_err(&dev->dev, "SIS630 comp. bus not detected, module not inserted.\n"); + return -ENODEV; + } + + /* set up the driverfs linkage to our parent device */ + sis630_adapter.dev.parent = &dev->dev; + + sprintf(sis630_adapter.name, "SMBus SIS630 adapter at %04x", + acpi_base + SMB_STS); + + return i2c_add_adapter(&sis630_adapter); +} + +static void __devexit sis630_remove(struct pci_dev *dev) +{ + if (acpi_base) { + i2c_del_adapter(&sis630_adapter); + release_region(acpi_base + SMB_STS, SIS630_SMB_IOREGION); + acpi_base = 0; + } +} + + +static struct pci_driver sis630_driver = { + .name = "sis630_smbus", + .id_table = sis630_ids, + .probe = sis630_probe, + .remove = __devexit_p(sis630_remove), +}; + +static int __init i2c_sis630_init(void) +{ + return pci_register_driver(&sis630_driver); +} + + +static void __exit i2c_sis630_exit(void) +{ + pci_unregister_driver(&sis630_driver); +} + + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Alexander Malysh <amalysh@web.de>"); +MODULE_DESCRIPTION("SIS630 SMBus driver"); + +module_init(i2c_sis630_init); +module_exit(i2c_sis630_exit); diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c new file mode 100644 index 00000000000..3cac6d43bce --- /dev/null +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -0,0 +1,358 @@ +/* + sis96x.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (c) 2003 Mark M. Hoffman <mhoffman@lightlink.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + This module must be considered BETA unless and until + the chipset manufacturer releases a datasheet. + The register definitions are based on the SiS630. + + This module relies on quirk_sis_96x_smbus (drivers/pci/quirks.c) + for just about every machine for which users have reported. + If this module isn't detecting your 96x south bridge, have a + look there. + + We assume there can only be one SiS96x with one SMBus interface. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <asm/io.h> + +/* + HISTORY: + 2003-05-11 1.0.0 Updated from lm_sensors project for kernel 2.5 + (was i2c-sis645.c from lm_sensors 2.7.0) +*/ +#define SIS96x_VERSION "1.0.0" + +/* base address register in PCI config space */ +#define SIS96x_BAR 0x04 + +/* SiS96x SMBus registers */ +#define SMB_STS 0x00 +#define SMB_EN 0x01 +#define SMB_CNT 0x02 +#define SMB_HOST_CNT 0x03 +#define SMB_ADDR 0x04 +#define SMB_CMD 0x05 +#define SMB_PCOUNT 0x06 +#define SMB_COUNT 0x07 +#define SMB_BYTE 0x08 +#define SMB_DEV_ADDR 0x10 +#define SMB_DB0 0x11 +#define SMB_DB1 0x12 +#define SMB_SAA 0x13 + +/* register count for request_region */ +#define SMB_IOSIZE 0x20 + +/* Other settings */ +#define MAX_TIMEOUT 500 + +/* SiS96x SMBus constants */ +#define SIS96x_QUICK 0x00 +#define SIS96x_BYTE 0x01 +#define SIS96x_BYTE_DATA 0x02 +#define SIS96x_WORD_DATA 0x03 +#define SIS96x_PROC_CALL 0x04 +#define SIS96x_BLOCK_DATA 0x05 + +static struct i2c_adapter sis96x_adapter; +static u16 sis96x_smbus_base = 0; + +static inline u8 sis96x_read(u8 reg) +{ + return inb(sis96x_smbus_base + reg) ; +} + +static inline void sis96x_write(u8 reg, u8 data) +{ + outb(data, sis96x_smbus_base + reg) ; +} + +/* Execute a SMBus transaction. + int size is from SIS96x_QUICK to SIS96x_BLOCK_DATA + */ +static int sis96x_transaction(int size) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&sis96x_adapter.dev, "SMBus transaction %d\n", size); + + /* Make sure the SMBus host is ready to start transmitting */ + if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { + + dev_dbg(&sis96x_adapter.dev, "SMBus busy (0x%02x). " + "Resetting...\n", temp); + + /* kill the transaction */ + sis96x_write(SMB_HOST_CNT, 0x20); + + /* check it again */ + if (((temp = sis96x_read(SMB_CNT)) & 0x03) != 0x00) { + dev_dbg(&sis96x_adapter.dev, "Failed (0x%02x)\n", temp); + return -1; + } else { + dev_dbg(&sis96x_adapter.dev, "Successful\n"); + } + } + + /* Turn off timeout interrupts, set fast host clock */ + sis96x_write(SMB_CNT, 0x20); + + /* clear all (sticky) status flags */ + temp = sis96x_read(SMB_STS); + sis96x_write(SMB_STS, temp & 0x1e); + + /* start the transaction by setting bit 4 and size bits */ + sis96x_write(SMB_HOST_CNT, 0x10 | (size & 0x07)); + + /* We will always wait for a fraction of a second! */ + do { + msleep(1); + temp = sis96x_read(SMB_STS); + } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); + result = -1; + } + + /* device error - probably missing ACK */ + if (temp & 0x02) { + dev_dbg(&sis96x_adapter.dev, "Failed bus transaction!\n"); + result = -1; + } + + /* bus collision */ + if (temp & 0x04) { + dev_dbg(&sis96x_adapter.dev, "Bus collision!\n"); + result = -1; + } + + /* Finish up by resetting the bus */ + sis96x_write(SMB_STS, temp); + if ((temp = sis96x_read(SMB_STS))) { + dev_dbg(&sis96x_adapter.dev, "Failed reset at " + "end of transaction! (0x%02x)\n", temp); + } + + return result; +} + +/* Return -1 on error. */ +static s32 sis96x_access(struct i2c_adapter * adap, u16 addr, + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data * data) +{ + + switch (size) { + case I2C_SMBUS_QUICK: + sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + size = SIS96x_QUICK; + break; + + case I2C_SMBUS_BYTE: + sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + if (read_write == I2C_SMBUS_WRITE) + sis96x_write(SMB_CMD, command); + size = SIS96x_BYTE; + break; + + case I2C_SMBUS_BYTE_DATA: + sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis96x_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) + sis96x_write(SMB_BYTE, data->byte); + size = SIS96x_BYTE_DATA; + break; + + case I2C_SMBUS_PROC_CALL: + case I2C_SMBUS_WORD_DATA: + sis96x_write(SMB_ADDR, ((addr & 0x7f) << 1) | (read_write & 0x01)); + sis96x_write(SMB_CMD, command); + if (read_write == I2C_SMBUS_WRITE) { + sis96x_write(SMB_BYTE, data->word & 0xff); + sis96x_write(SMB_BYTE + 1, (data->word & 0xff00) >> 8); + } + size = (size == I2C_SMBUS_PROC_CALL ? + SIS96x_PROC_CALL : SIS96x_WORD_DATA); + break; + + case I2C_SMBUS_BLOCK_DATA: + /* TO DO: */ + dev_info(&adap->dev, "SMBus block not implemented!\n"); + return -1; + break; + + default: + dev_info(&adap->dev, "Unsupported I2C size\n"); + return -1; + break; + } + + if (sis96x_transaction(size)) + return -1; + + if ((size != SIS96x_PROC_CALL) && + ((read_write == I2C_SMBUS_WRITE) || (size == SIS96x_QUICK))) + return 0; + + switch (size) { + case SIS96x_BYTE: + case SIS96x_BYTE_DATA: + data->byte = sis96x_read(SMB_BYTE); + break; + + case SIS96x_WORD_DATA: + case SIS96x_PROC_CALL: + data->word = sis96x_read(SMB_BYTE) + + (sis96x_read(SMB_BYTE + 1) << 8); + break; + } + return 0; +} + +static u32 sis96x_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_PROC_CALL; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = sis96x_access, + .functionality = sis96x_func, +}; + +static struct i2c_adapter sis96x_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static struct pci_device_id sis96x_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_SMBUS) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, sis96x_ids); + +static int __devinit sis96x_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + u16 ww = 0; + int retval; + + if (sis96x_smbus_base) { + dev_err(&dev->dev, "Only one device supported.\n"); + return -EBUSY; + } + + pci_read_config_word(dev, PCI_CLASS_DEVICE, &ww); + if (PCI_CLASS_SERIAL_SMBUS != ww) { + dev_err(&dev->dev, "Unsupported device class 0x%04x!\n", ww); + return -ENODEV; + } + + sis96x_smbus_base = pci_resource_start(dev, SIS96x_BAR); + if (!sis96x_smbus_base) { + dev_err(&dev->dev, "SiS96x SMBus base address " + "not initialized!\n"); + return -EINVAL; + } + dev_info(&dev->dev, "SiS96x SMBus base address: 0x%04x\n", + sis96x_smbus_base); + + /* Everything is happy, let's grab the memory and set things up. */ + if (!request_region(sis96x_smbus_base, SMB_IOSIZE, "sis96x-smbus")) { + dev_err(&dev->dev, "SMBus registers 0x%04x-0x%04x " + "already in use!\n", sis96x_smbus_base, + sis96x_smbus_base + SMB_IOSIZE - 1); + + sis96x_smbus_base = 0; + return -EINVAL; + } + + /* set up the driverfs linkage to our parent device */ + sis96x_adapter.dev.parent = &dev->dev; + + snprintf(sis96x_adapter.name, I2C_NAME_SIZE, + "SiS96x SMBus adapter at 0x%04x", sis96x_smbus_base); + + if ((retval = i2c_add_adapter(&sis96x_adapter))) { + dev_err(&dev->dev, "Couldn't register adapter!\n"); + release_region(sis96x_smbus_base, SMB_IOSIZE); + sis96x_smbus_base = 0; + } + + return retval; +} + +static void __devexit sis96x_remove(struct pci_dev *dev) +{ + if (sis96x_smbus_base) { + i2c_del_adapter(&sis96x_adapter); + release_region(sis96x_smbus_base, SMB_IOSIZE); + sis96x_smbus_base = 0; + } +} + +static struct pci_driver sis96x_driver = { + .name = "sis96x_smbus", + .id_table = sis96x_ids, + .probe = sis96x_probe, + .remove = __devexit_p(sis96x_remove), +}; + +static int __init i2c_sis96x_init(void) +{ + printk(KERN_INFO "i2c-sis96x version %s\n", SIS96x_VERSION); + return pci_register_driver(&sis96x_driver); +} + +static void __exit i2c_sis96x_exit(void) +{ + pci_unregister_driver(&sis96x_driver); +} + +MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); +MODULE_DESCRIPTION("SiS96x SMBus driver"); +MODULE_LICENSE("GPL"); + +/* Register initialization functions using helper macros */ +module_init(i2c_sis96x_init); +module_exit(i2c_sis96x_exit); + diff --git a/drivers/i2c/busses/i2c-stub.c b/drivers/i2c/busses/i2c-stub.c new file mode 100644 index 00000000000..19c805ead4d --- /dev/null +++ b/drivers/i2c/busses/i2c-stub.c @@ -0,0 +1,143 @@ +/* + i2c-stub.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + + Copyright (c) 2004 Mark M. Hoffman <mhoffman@lightlink.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#define DEBUG 1 + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/i2c.h> + +static u8 stub_pointer; +static u8 stub_bytes[256]; +static u16 stub_words[256]; + +/* Return -1 on error. */ +static s32 stub_xfer(struct i2c_adapter * adap, u16 addr, unsigned short flags, + char read_write, u8 command, int size, union i2c_smbus_data * data) +{ + s32 ret; + + switch (size) { + + case I2C_SMBUS_QUICK: + dev_dbg(&adap->dev, "smbus quick - addr 0x%02x\n", addr); + ret = 0; + break; + + case I2C_SMBUS_BYTE: + if (read_write == I2C_SMBUS_WRITE) { + stub_pointer = command; + dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " + "wrote 0x%02x.\n", + addr, command); + } else { + data->byte = stub_bytes[stub_pointer++]; + dev_dbg(&adap->dev, "smbus byte - addr 0x%02x, " + "read 0x%02x.\n", + addr, data->byte); + } + + ret = 0; + break; + + case I2C_SMBUS_BYTE_DATA: + if (read_write == I2C_SMBUS_WRITE) { + stub_bytes[command] = data->byte; + dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " + "wrote 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } else { + data->byte = stub_bytes[command]; + dev_dbg(&adap->dev, "smbus byte data - addr 0x%02x, " + "read 0x%02x at 0x%02x.\n", + addr, data->byte, command); + } + stub_pointer = command + 1; + + ret = 0; + break; + + case I2C_SMBUS_WORD_DATA: + if (read_write == I2C_SMBUS_WRITE) { + stub_words[command] = data->word; + dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " + "wrote 0x%04x at 0x%02x.\n", + addr, data->word, command); + } else { + data->word = stub_words[command]; + dev_dbg(&adap->dev, "smbus word data - addr 0x%02x, " + "read 0x%04x at 0x%02x.\n", + addr, data->word, command); + } + + ret = 0; + break; + + default: + dev_dbg(&adap->dev, "Unsupported I2C/SMBus command\n"); + ret = -1; + break; + } /* switch (size) */ + + return ret; +} + +static u32 stub_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .functionality = stub_func, + .smbus_xfer = stub_xfer, +}; + +static struct i2c_adapter stub_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "SMBus stub driver", +}; + +static int __init i2c_stub_init(void) +{ + printk(KERN_INFO "i2c-stub loaded\n"); + return i2c_add_adapter(&stub_adapter); +} + +static void __exit i2c_stub_exit(void) +{ + i2c_del_adapter(&stub_adapter); +} + +MODULE_AUTHOR("Mark M. Hoffman <mhoffman@lightlink.com>"); +MODULE_DESCRIPTION("I2C stub driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_stub_init); +module_exit(i2c_stub_exit); + diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c new file mode 100644 index 00000000000..2cbc4cd2236 --- /dev/null +++ b/drivers/i2c/busses/i2c-via.c @@ -0,0 +1,185 @@ +/* + i2c-via.c - Part of lm_sensors, Linux kernel modules + for hardware monitoring + + i2c Support for Via Technologies 82C586B South Bridge + + Copyright (c) 1998, 1999 Kyösti Mälkki <kmalkki@cc.hut.fi> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/ioport.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* Power management registers */ +#define PM_CFG_REVID 0x08 /* silicon revision code */ +#define PM_CFG_IOBASE0 0x20 +#define PM_CFG_IOBASE1 0x48 + +#define I2C_DIR (pm_io_base+0x40) +#define I2C_OUT (pm_io_base+0x42) +#define I2C_IN (pm_io_base+0x44) +#define I2C_SCL 0x02 /* clock bit in DIR/OUT/IN register */ +#define I2C_SDA 0x04 + +/* io-region reservation */ +#define IOSPACE 0x06 +#define IOTEXT "via-i2c" + +static u16 pm_io_base = 0; + +/* + It does not appear from the datasheet that the GPIO pins are + open drain. So a we set a low value by setting the direction to + output and a high value by setting the direction to input and + relying on the required I2C pullup. The data value is initialized + to 0 in via_init() and never changed. +*/ +static void bit_via_setscl(void *data, int state) +{ + outb(state ? inb(I2C_DIR) & ~I2C_SCL : inb(I2C_DIR) | I2C_SCL, I2C_DIR); +} + +static void bit_via_setsda(void *data, int state) +{ + outb(state ? inb(I2C_DIR) & ~I2C_SDA : inb(I2C_DIR) | I2C_SDA, I2C_DIR); +} + +static int bit_via_getscl(void *data) +{ + return (0 != (inb(I2C_IN) & I2C_SCL)); +} + +static int bit_via_getsda(void *data) +{ + return (0 != (inb(I2C_IN) & I2C_SDA)); +} + + +static struct i2c_algo_bit_data bit_data = { + .setsda = bit_via_setsda, + .setscl = bit_via_setscl, + .getsda = bit_via_getsda, + .getscl = bit_via_getscl, + .udelay = 5, + .mdelay = 5, + .timeout = HZ +}; + +static struct i2c_adapter vt586b_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .name = "VIA i2c", + .algo_data = &bit_data, +}; + + +static struct pci_device_id vt586b_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, vt586b_ids); + +static int __devinit vt586b_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + u16 base; + u8 rev; + int res; + + if (pm_io_base) { + dev_err(&dev->dev, "i2c-via: Will only support one host\n"); + return -ENODEV; + } + + pci_read_config_byte(dev, PM_CFG_REVID, &rev); + + switch (rev) { + case 0x00: + base = PM_CFG_IOBASE0; + break; + case 0x01: + case 0x10: + base = PM_CFG_IOBASE1; + break; + + default: + base = PM_CFG_IOBASE1; + /* later revision */ + } + + pci_read_config_word(dev, base, &pm_io_base); + pm_io_base &= (0xff << 8); + + if (!request_region(I2C_DIR, IOSPACE, IOTEXT)) { + dev_err(&dev->dev, "IO 0x%x-0x%x already in use\n", I2C_DIR, I2C_DIR + IOSPACE); + return -ENODEV; + } + + outb(inb(I2C_DIR) & ~(I2C_SDA | I2C_SCL), I2C_DIR); + outb(inb(I2C_OUT) & ~(I2C_SDA | I2C_SCL), I2C_OUT); + + /* set up the driverfs linkage to our parent device */ + vt586b_adapter.dev.parent = &dev->dev; + + res = i2c_bit_add_bus(&vt586b_adapter); + if ( res < 0 ) { + release_region(I2C_DIR, IOSPACE); + pm_io_base = 0; + return res; + } + return 0; +} + +static void __devexit vt586b_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&vt586b_adapter); + release_region(I2C_DIR, IOSPACE); + pm_io_base = 0; +} + + +static struct pci_driver vt586b_driver = { + .name = "vt586b_smbus", + .id_table = vt586b_ids, + .probe = vt586b_probe, + .remove = __devexit_p(vt586b_remove), +}; + +static int __init i2c_vt586b_init(void) +{ + return pci_register_driver(&vt586b_driver); +} + +static void __exit i2c_vt586b_exit(void) +{ + pci_unregister_driver(&vt586b_driver); +} + + +MODULE_AUTHOR("Kyösti Mälkki <kmalkki@cc.hut.fi>"); +MODULE_DESCRIPTION("i2c for Via vt82c586b southbridge"); +MODULE_LICENSE("GPL"); + +module_init(i2c_vt586b_init); +module_exit(i2c_vt586b_exit); diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c new file mode 100644 index 00000000000..0bb60a636e1 --- /dev/null +++ b/drivers/i2c/busses/i2c-viapro.c @@ -0,0 +1,458 @@ +/* + i2c-viapro.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998 - 2002 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, Kyösti Mälkki <kmalkki@cc.hut.fi>, + Mark D. Studebaker <mdsxyz123@yahoo.com> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* + Supports Via devices: + 82C596A/B (0x3050) + 82C596B (0x3051) + 82C686A/B + 8231 + 8233 + 8233A (0x3147 and 0x3177) + 8235 + 8237 + Note: we assume there can only be one device, with one SMBus interface. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/stddef.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/i2c.h> +#include <linux/init.h> +#include <asm/io.h> + +static struct pci_dev *vt596_pdev; + +#define SMBBA1 0x90 +#define SMBBA2 0x80 +#define SMBBA3 0xD0 + +/* SMBus address offsets */ +static unsigned short vt596_smba; +#define SMBHSTSTS (vt596_smba + 0) +#define SMBHSLVSTS (vt596_smba + 1) +#define SMBHSTCNT (vt596_smba + 2) +#define SMBHSTCMD (vt596_smba + 3) +#define SMBHSTADD (vt596_smba + 4) +#define SMBHSTDAT0 (vt596_smba + 5) +#define SMBHSTDAT1 (vt596_smba + 6) +#define SMBBLKDAT (vt596_smba + 7) +#define SMBSLVCNT (vt596_smba + 8) +#define SMBSHDWCMD (vt596_smba + 9) +#define SMBSLVEVT (vt596_smba + 0xA) +#define SMBSLVDAT (vt596_smba + 0xC) + +/* PCI Address Constants */ + +/* SMBus data in configuration space can be found in two places, + We try to select the better one*/ + +static unsigned short smb_cf_hstcfg = 0xD2; + +#define SMBHSTCFG (smb_cf_hstcfg) +#define SMBSLVC (smb_cf_hstcfg + 1) +#define SMBSHDW1 (smb_cf_hstcfg + 2) +#define SMBSHDW2 (smb_cf_hstcfg + 3) +#define SMBREV (smb_cf_hstcfg + 4) + +/* Other settings */ +#define MAX_TIMEOUT 500 +#define ENABLE_INT9 0 + +/* VT82C596 constants */ +#define VT596_QUICK 0x00 +#define VT596_BYTE 0x04 +#define VT596_BYTE_DATA 0x08 +#define VT596_WORD_DATA 0x0C +#define VT596_BLOCK_DATA 0x14 + + +/* If force is set to anything different from 0, we forcibly enable the + VT596. DANGEROUS! */ +static int force; +module_param(force, bool, 0); +MODULE_PARM_DESC(force, "Forcibly enable the SMBus. DANGEROUS!"); + +/* If force_addr is set to anything different from 0, we forcibly enable + the VT596 at the given address. VERY DANGEROUS! */ +static u16 force_addr; +module_param(force_addr, ushort, 0); +MODULE_PARM_DESC(force_addr, + "Forcibly enable the SMBus at the given address. " + "EXTREMELY DANGEROUS!"); + + +static struct i2c_adapter vt596_adapter; + +/* Another internally used function */ +static int vt596_transaction(void) +{ + int temp; + int result = 0; + int timeout = 0; + + dev_dbg(&vt596_adapter.dev, "Transaction (pre): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + /* Make sure the SMBus host is ready to start transmitting */ + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + dev_dbg(&vt596_adapter.dev, "SMBus busy (0x%02x). " + "Resetting...\n", temp); + + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + dev_dbg(&vt596_adapter.dev, "Failed! (0x%02x)\n", temp); + + return -1; + } else { + dev_dbg(&vt596_adapter.dev, "Successfull!\n"); + } + } + + /* start the transaction by setting bit 6 */ + outb_p(inb(SMBHSTCNT) | 0x040, SMBHSTCNT); + + /* We will always wait for a fraction of a second! + I don't know if VIA needs this, Intel did */ + do { + msleep(1); + temp = inb_p(SMBHSTSTS); + } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT)); + + /* If the SMBus is still busy, we give up */ + if (timeout >= MAX_TIMEOUT) { + result = -1; + dev_dbg(&vt596_adapter.dev, "SMBus Timeout!\n"); + } + + if (temp & 0x10) { + result = -1; + dev_dbg(&vt596_adapter.dev, "Error: Failed bus transaction\n"); + } + + if (temp & 0x08) { + result = -1; + dev_info(&vt596_adapter.dev, "Bus collision! SMBus may be " + "locked until next hard\nreset. (sorry!)\n"); + /* Clock stops and slave is stuck in mid-transmission */ + } + + if (temp & 0x04) { + result = -1; + dev_dbg(&vt596_adapter.dev, "Error: no response!\n"); + } + + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + outb_p(temp, SMBHSTSTS); + if ((temp = inb_p(SMBHSTSTS)) & 0x1F) { + dev_warn(&vt596_adapter.dev, "Failed reset at end " + "of transaction (%02x)\n", temp); + } + } + + dev_dbg(&vt596_adapter.dev, "Transaction (post): CNT=%02x, CMD=%02x, " + "ADD=%02x, DAT0=%02x, DAT1=%02x\n", inb_p(SMBHSTCNT), + inb_p(SMBHSTCMD), inb_p(SMBHSTADD), inb_p(SMBHSTDAT0), + inb_p(SMBHSTDAT1)); + + return result; +} + +/* Return -1 on error. */ +static s32 vt596_access(struct i2c_adapter *adap, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data) +{ + int i, len; + + switch (size) { + case I2C_SMBUS_PROC_CALL: + dev_info(&vt596_adapter.dev, + "I2C_SMBUS_PROC_CALL not supported!\n"); + return -1; + case I2C_SMBUS_QUICK: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + size = VT596_QUICK; + break; + case I2C_SMBUS_BYTE: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(command, SMBHSTCMD); + size = VT596_BYTE; + break; + case I2C_SMBUS_BYTE_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) + outb_p(data->byte, SMBHSTDAT0); + size = VT596_BYTE_DATA; + break; + case I2C_SMBUS_WORD_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + outb_p(data->word & 0xff, SMBHSTDAT0); + outb_p((data->word & 0xff00) >> 8, SMBHSTDAT1); + } + size = VT596_WORD_DATA; + break; + case I2C_SMBUS_BLOCK_DATA: + outb_p(((addr & 0x7f) << 1) | (read_write & 0x01), + SMBHSTADD); + outb_p(command, SMBHSTCMD); + if (read_write == I2C_SMBUS_WRITE) { + len = data->block[0]; + if (len < 0) + len = 0; + if (len > I2C_SMBUS_BLOCK_MAX) + len = I2C_SMBUS_BLOCK_MAX; + outb_p(len, SMBHSTDAT0); + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= len; i++) + outb_p(data->block[i], SMBBLKDAT); + } + size = VT596_BLOCK_DATA; + break; + } + + outb_p((size & 0x1C) + (ENABLE_INT9 & 1), SMBHSTCNT); + + if (vt596_transaction()) /* Error in transaction */ + return -1; + + if ((read_write == I2C_SMBUS_WRITE) || (size == VT596_QUICK)) + return 0; + + switch (size) { + case VT596_BYTE: + /* Where is the result put? I assume here it is in + * SMBHSTDAT0 but it might just as well be in the + * SMBHSTCMD. No clue in the docs + */ + data->byte = inb_p(SMBHSTDAT0); + break; + case VT596_BYTE_DATA: + data->byte = inb_p(SMBHSTDAT0); + break; + case VT596_WORD_DATA: + data->word = inb_p(SMBHSTDAT0) + (inb_p(SMBHSTDAT1) << 8); + break; + case VT596_BLOCK_DATA: + data->block[0] = inb_p(SMBHSTDAT0); + if (data->block[0] > I2C_SMBUS_BLOCK_MAX) + data->block[0] = I2C_SMBUS_BLOCK_MAX; + i = inb_p(SMBHSTCNT); /* Reset SMBBLKDAT */ + for (i = 1; i <= data->block[0]; i++) + data->block[i] = inb_p(SMBBLKDAT); + break; + } + return 0; +} + +static u32 vt596_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +static struct i2c_algorithm smbus_algorithm = { + .name = "Non-I2C SMBus adapter", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = vt596_access, + .functionality = vt596_func, +}; + +static struct i2c_adapter vt596_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_HWMON, + .algo = &smbus_algorithm, + .name = "unset", +}; + +static int __devinit vt596_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + unsigned char temp; + int error = -ENODEV; + + /* Determine the address of the SMBus areas */ + if (force_addr) { + vt596_smba = force_addr & 0xfff0; + force = 0; + goto found; + } + + if ((pci_read_config_word(pdev, id->driver_data, &vt596_smba)) || + !(vt596_smba & 0x1)) { + /* try 2nd address and config reg. for 596 */ + if (id->device == PCI_DEVICE_ID_VIA_82C596_3 && + !pci_read_config_word(pdev, SMBBA2, &vt596_smba) && + (vt596_smba & 0x1)) { + smb_cf_hstcfg = 0x84; + } else { + /* no matches at all */ + dev_err(&pdev->dev, "Cannot configure " + "SMBus I/O Base address\n"); + return -ENODEV; + } + } + + vt596_smba &= 0xfff0; + if (vt596_smba == 0) { + dev_err(&pdev->dev, "SMBus base address " + "uninitialized - upgrade BIOS or use " + "force_addr=0xaddr\n"); + return -ENODEV; + } + + found: + if (!request_region(vt596_smba, 8, "viapro-smbus")) { + dev_err(&pdev->dev, "SMBus region 0x%x already in use!\n", + vt596_smba); + return -ENODEV; + } + + pci_read_config_byte(pdev, SMBHSTCFG, &temp); + /* If force_addr is set, we program the new address here. Just to make + sure, we disable the VT596 first. */ + if (force_addr) { + pci_write_config_byte(pdev, SMBHSTCFG, temp & 0xfe); + pci_write_config_word(pdev, id->driver_data, vt596_smba); + pci_write_config_byte(pdev, SMBHSTCFG, temp | 0x01); + dev_warn(&pdev->dev, "WARNING: SMBus interface set to new " + "address 0x%04x!\n", vt596_smba); + } else if ((temp & 1) == 0) { + if (force) { + /* NOTE: This assumes I/O space and other allocations + * WERE done by the Bios! Don't complain if your + * hardware does weird things after enabling this. + * :') Check for Bios updates before resorting to + * this. + */ + pci_write_config_byte(pdev, SMBHSTCFG, temp | 1); + dev_info(&pdev->dev, "Enabling SMBus device\n"); + } else { + dev_err(&pdev->dev, "SMBUS: Error: Host SMBus " + "controller not enabled! - upgrade BIOS or " + "use force=1\n"); + goto release_region; + } + } + + if ((temp & 0x0E) == 8) + dev_dbg(&pdev->dev, "using Interrupt 9 for SMBus.\n"); + else if ((temp & 0x0E) == 0) + dev_dbg(&pdev->dev, "using Interrupt SMI# for SMBus.\n"); + else + dev_dbg(&pdev->dev, "Illegal Interrupt configuration " + "(or code out of date)!\n"); + + pci_read_config_byte(pdev, SMBREV, &temp); + dev_dbg(&pdev->dev, "SMBREV = 0x%X\n", temp); + dev_dbg(&pdev->dev, "VT596_smba = 0x%X\n", vt596_smba); + + vt596_adapter.dev.parent = &pdev->dev; + snprintf(vt596_adapter.name, I2C_NAME_SIZE, + "SMBus Via Pro adapter at %04x", vt596_smba); + + vt596_pdev = pci_dev_get(pdev); + if (i2c_add_adapter(&vt596_adapter)) { + pci_dev_put(vt596_pdev); + vt596_pdev = NULL; + } + + /* Always return failure here. This is to allow other drivers to bind + * to this pci device. We don't really want to have control over the + * pci device, we only wanted to read as few register values from it. + */ + return -ENODEV; + + release_region: + release_region(vt596_smba, 8); + return error; +} + +static struct pci_device_id vt596_ids[] = { + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596_3), + .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C596B_3), + .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4), + .driver_data = SMBBA1 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233_0), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8233A), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237), + .driver_data = SMBBA3 }, + { PCI_DEVICE(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8231_4), + .driver_data = SMBBA1 }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, vt596_ids); + +static struct pci_driver vt596_driver = { + .name = "vt596_smbus", + .id_table = vt596_ids, + .probe = vt596_probe, +}; + +static int __init i2c_vt596_init(void) +{ + return pci_register_driver(&vt596_driver); +} + + +static void __exit i2c_vt596_exit(void) +{ + pci_unregister_driver(&vt596_driver); + if (vt596_pdev != NULL) { + i2c_del_adapter(&vt596_adapter); + release_region(vt596_smba, 8); + pci_dev_put(vt596_pdev); + vt596_pdev = NULL; + } +} + +MODULE_AUTHOR( + "Frodo Looijaard <frodol@dds.nl> and " + "Philip Edelbrock <phil@netroedge.com>"); +MODULE_DESCRIPTION("vt82c596 SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_vt596_init); +module_exit(i2c_vt596_exit); diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c new file mode 100644 index 00000000000..3edf0e34155 --- /dev/null +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -0,0 +1,254 @@ +/* + voodoo3.c - Part of lm_sensors, Linux kernel modules for hardware + monitoring + Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>, + Philip Edelbrock <phil@netroedge.com>, + Ralph Metzler <rjkm@thp.uni-koeln.de>, and + Mark D. Studebaker <mdsxyz123@yahoo.com> + + Based on code written by Ralph Metzler <rjkm@thp.uni-koeln.de> and + Simon Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +/* This interfaces to the I2C bus of the Voodoo3 to gain access to + the BT869 and possibly other I2C devices. */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +/* the only registers we use */ +#define REG 0x78 +#define REG2 0x70 + +/* bit locations in the register */ +#define DDC_ENAB 0x00040000 +#define DDC_SCL_OUT 0x00080000 +#define DDC_SDA_OUT 0x00100000 +#define DDC_SCL_IN 0x00200000 +#define DDC_SDA_IN 0x00400000 +#define I2C_ENAB 0x00800000 +#define I2C_SCL_OUT 0x01000000 +#define I2C_SDA_OUT 0x02000000 +#define I2C_SCL_IN 0x04000000 +#define I2C_SDA_IN 0x08000000 + +/* initialization states */ +#define INIT2 0x2 +#define INIT3 0x4 + +/* delays */ +#define CYCLE_DELAY 10 +#define TIMEOUT (HZ / 2) + + +static void __iomem *ioaddr; + +/* The voo GPIO registers don't have individual masks for each bit + so we always have to read before writing. */ + +static void bit_vooi2c_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= I2C_SCL_OUT; + else + r &= ~I2C_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_vooi2c_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= I2C_SDA_OUT; + else + r &= ~I2C_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +/* The GPIO pins are open drain, so the pins always remain outputs. + We rely on the i2c-algo-bit routines to set the pins high before + reading the input from other chips. */ + +static int bit_vooi2c_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SCL_IN)); +} + +static int bit_vooi2c_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & I2C_SDA_IN)); +} + +static void bit_vooddc_setscl(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= DDC_SCL_OUT; + else + r &= ~DDC_SCL_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static void bit_vooddc_setsda(void *data, int val) +{ + unsigned int r; + r = readl(ioaddr + REG); + if (val) + r |= DDC_SDA_OUT; + else + r &= ~DDC_SDA_OUT; + writel(r, ioaddr + REG); + readl(ioaddr + REG); /* flush posted write */ +} + +static int bit_vooddc_getscl(void *data) +{ + return (0 != (readl(ioaddr + REG) & DDC_SCL_IN)); +} + +static int bit_vooddc_getsda(void *data) +{ + return (0 != (readl(ioaddr + REG) & DDC_SDA_IN)); +} + +static int config_v3(struct pci_dev *dev) +{ + unsigned long cadr; + + /* map Voodoo3 memory */ + cadr = dev->resource[0].start; + cadr &= PCI_BASE_ADDRESS_MEM_MASK; + ioaddr = ioremap_nocache(cadr, 0x1000); + if (ioaddr) { + writel(0x8160, ioaddr + REG2); + writel(0xcffc0020, ioaddr + REG); + dev_info(&dev->dev, "Using Banshee/Voodoo3 I2C device at %p\n", ioaddr); + return 0; + } + return -ENODEV; +} + +static struct i2c_algo_bit_data voo_i2c_bit_data = { + .setsda = bit_vooi2c_setsda, + .setscl = bit_vooi2c_setscl, + .getsda = bit_vooi2c_getsda, + .getscl = bit_vooi2c_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter voodoo3_i2c_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_TV_ANALOG, + .name = "I2C Voodoo3/Banshee adapter", + .algo_data = &voo_i2c_bit_data, +}; + +static struct i2c_algo_bit_data voo_ddc_bit_data = { + .setsda = bit_vooddc_setsda, + .setscl = bit_vooddc_setscl, + .getsda = bit_vooddc_getsda, + .getscl = bit_vooddc_getscl, + .udelay = CYCLE_DELAY, + .mdelay = CYCLE_DELAY, + .timeout = TIMEOUT +}; + +static struct i2c_adapter voodoo3_ddc_adapter = { + .owner = THIS_MODULE, + .class = I2C_CLASS_DDC, + .name = "DDC Voodoo3/Banshee adapter", + .algo_data = &voo_ddc_bit_data, +}; + +static struct pci_device_id voodoo3_ids[] __devinitdata = { + { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_VOODOO3) }, + { PCI_DEVICE(PCI_VENDOR_ID_3DFX, PCI_DEVICE_ID_3DFX_BANSHEE) }, + { 0, } +}; + +MODULE_DEVICE_TABLE (pci, voodoo3_ids); + +static int __devinit voodoo3_probe(struct pci_dev *dev, const struct pci_device_id *id) +{ + int retval; + + retval = config_v3(dev); + if (retval) + return retval; + + /* set up the sysfs linkage to our parent device */ + voodoo3_i2c_adapter.dev.parent = &dev->dev; + voodoo3_ddc_adapter.dev.parent = &dev->dev; + + retval = i2c_bit_add_bus(&voodoo3_i2c_adapter); + if (retval) + return retval; + retval = i2c_bit_add_bus(&voodoo3_ddc_adapter); + if (retval) + i2c_bit_del_bus(&voodoo3_i2c_adapter); + return retval; +} + +static void __devexit voodoo3_remove(struct pci_dev *dev) +{ + i2c_bit_del_bus(&voodoo3_i2c_adapter); + i2c_bit_del_bus(&voodoo3_ddc_adapter); + iounmap(ioaddr); +} + +static struct pci_driver voodoo3_driver = { + .name = "voodoo3_smbus", + .id_table = voodoo3_ids, + .probe = voodoo3_probe, + .remove = __devexit_p(voodoo3_remove), +}; + +static int __init i2c_voodoo3_init(void) +{ + return pci_register_driver(&voodoo3_driver); +} + +static void __exit i2c_voodoo3_exit(void) +{ + pci_unregister_driver(&voodoo3_driver); +} + + +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>, " + "Philip Edelbrock <phil@netroedge.com>, " + "Ralph Metzler <rjkm@thp.uni-koeln.de>, " + "and Mark D. Studebaker <mdsxyz123@yahoo.com>"); +MODULE_DESCRIPTION("Voodoo3 I2C/SMBus driver"); +MODULE_LICENSE("GPL"); + +module_init(i2c_voodoo3_init); +module_exit(i2c_voodoo3_exit); diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c new file mode 100644 index 00000000000..1c4159a9362 --- /dev/null +++ b/drivers/i2c/busses/scx200_acb.c @@ -0,0 +1,557 @@ +/* linux/drivers/i2c/scx200_acb.c + + Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> + + National Semiconductor SCx200 ACCESS.bus support + + Based on i2c-keywest.c which is: + Copyright (c) 2001 Benjamin Herrenschmidt <benh@kernel.crashing.org> + Copyright (c) 2000 Philip Edelbrock <phil@stimpy.netroedge.com> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License as + published by the Free Software Foundation; either version 2 of the + License, or (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/smp_lock.h> +#include <linux/pci.h> +#include <linux/delay.h> +#include <asm/io.h> + +#include <linux/scx200.h> + +#define NAME "scx200_acb" + +MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); +MODULE_DESCRIPTION("NatSemi SCx200 ACCESS.bus Driver"); +MODULE_LICENSE("GPL"); + +#define MAX_DEVICES 4 +static int base[MAX_DEVICES] = { 0x820, 0x840 }; +module_param_array(base, int, NULL, 0); +MODULE_PARM_DESC(base, "Base addresses for the ACCESS.bus controllers"); + +#ifdef DEBUG +#define DBG(x...) printk(KERN_DEBUG NAME ": " x) +#else +#define DBG(x...) +#endif + +/* The hardware supports interrupt driven mode too, but I haven't + implemented that. */ +#define POLLED_MODE 1 +#define POLL_TIMEOUT (HZ) + +enum scx200_acb_state { + state_idle, + state_address, + state_command, + state_repeat_start, + state_quick, + state_read, + state_write, +}; + +static const char *scx200_acb_state_name[] = { + "idle", + "address", + "command", + "repeat_start", + "quick", + "read", + "write", +}; + +/* Physical interface */ +struct scx200_acb_iface +{ + struct scx200_acb_iface *next; + struct i2c_adapter adapter; + unsigned base; + struct semaphore sem; + + /* State machine data */ + enum scx200_acb_state state; + int result; + u8 address_byte; + u8 command; + u8 *ptr; + char needs_reset; + unsigned len; +}; + +/* Register Definitions */ +#define ACBSDA (iface->base + 0) +#define ACBST (iface->base + 1) +#define ACBST_SDAST 0x40 /* SDA Status */ +#define ACBST_BER 0x20 +#define ACBST_NEGACK 0x10 /* Negative Acknowledge */ +#define ACBST_STASTR 0x08 /* Stall After Start */ +#define ACBST_MASTER 0x02 +#define ACBCST (iface->base + 2) +#define ACBCST_BB 0x02 +#define ACBCTL1 (iface->base + 3) +#define ACBCTL1_STASTRE 0x80 +#define ACBCTL1_NMINTE 0x40 +#define ACBCTL1_ACK 0x10 +#define ACBCTL1_STOP 0x02 +#define ACBCTL1_START 0x01 +#define ACBADDR (iface->base + 4) +#define ACBCTL2 (iface->base + 5) +#define ACBCTL2_ENABLE 0x01 + +/************************************************************************/ + +static void scx200_acb_machine(struct scx200_acb_iface *iface, u8 status) +{ + const char *errmsg; + + DBG("state %s, status = 0x%02x\n", + scx200_acb_state_name[iface->state], status); + + if (status & ACBST_BER) { + errmsg = "bus error"; + goto error; + } + if (!(status & ACBST_MASTER)) { + errmsg = "not master"; + goto error; + } + if (status & ACBST_NEGACK) + goto negack; + + switch (iface->state) { + case state_idle: + dev_warn(&iface->adapter.dev, "interrupt in idle state\n"); + break; + + case state_address: + /* Do a pointer write first */ + outb(iface->address_byte & ~1, ACBSDA); + + iface->state = state_command; + break; + + case state_command: + outb(iface->command, ACBSDA); + + if (iface->address_byte & 1) + iface->state = state_repeat_start; + else + iface->state = state_write; + break; + + case state_repeat_start: + outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); + /* fallthrough */ + + case state_quick: + if (iface->address_byte & 1) { + if (iface->len == 1) + outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); + else + outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); + outb(iface->address_byte, ACBSDA); + + iface->state = state_read; + } else { + outb(iface->address_byte, ACBSDA); + + iface->state = state_write; + } + break; + + case state_read: + /* Set ACK if receiving the last byte */ + if (iface->len == 1) + outb(inb(ACBCTL1) | ACBCTL1_ACK, ACBCTL1); + else + outb(inb(ACBCTL1) & ~ACBCTL1_ACK, ACBCTL1); + + *iface->ptr++ = inb(ACBSDA); + --iface->len; + + if (iface->len == 0) { + iface->result = 0; + iface->state = state_idle; + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + } + + break; + + case state_write: + if (iface->len == 0) { + iface->result = 0; + iface->state = state_idle; + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + break; + } + + outb(*iface->ptr++, ACBSDA); + --iface->len; + + break; + } + + return; + + negack: + DBG("negative acknowledge in state %s\n", + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -ENXIO; + + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + outb(ACBST_STASTR | ACBST_NEGACK, ACBST); + return; + + error: + dev_err(&iface->adapter.dev, "%s in state %s\n", errmsg, + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -EIO; + iface->needs_reset = 1; +} + +static void scx200_acb_timeout(struct scx200_acb_iface *iface) +{ + dev_err(&iface->adapter.dev, "timeout in state %s\n", + scx200_acb_state_name[iface->state]); + + iface->state = state_idle; + iface->result = -EIO; + iface->needs_reset = 1; +} + +#ifdef POLLED_MODE +static void scx200_acb_poll(struct scx200_acb_iface *iface) +{ + u8 status = 0; + unsigned long timeout; + + timeout = jiffies + POLL_TIMEOUT; + while (time_before(jiffies, timeout)) { + status = inb(ACBST); + if ((status & (ACBST_SDAST|ACBST_BER|ACBST_NEGACK)) != 0) { + scx200_acb_machine(iface, status); + return; + } + msleep(10); + } + + scx200_acb_timeout(iface); +} +#endif /* POLLED_MODE */ + +static void scx200_acb_reset(struct scx200_acb_iface *iface) +{ + /* Disable the ACCESS.bus device and Configure the SCL + frequency: 16 clock cycles */ + outb(0x70, ACBCTL2); + /* Polling mode */ + outb(0, ACBCTL1); + /* Disable slave address */ + outb(0, ACBADDR); + /* Enable the ACCESS.bus device */ + outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2); + /* Free STALL after START */ + outb(inb(ACBCTL1) & ~(ACBCTL1_STASTRE | ACBCTL1_NMINTE), ACBCTL1); + /* Send a STOP */ + outb(inb(ACBCTL1) | ACBCTL1_STOP, ACBCTL1); + /* Clear BER, NEGACK and STASTR bits */ + outb(ACBST_BER | ACBST_NEGACK | ACBST_STASTR, ACBST); + /* Clear BB bit */ + outb(inb(ACBCST) | ACBCST_BB, ACBCST); +} + +static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter, + u16 address, unsigned short flags, + char rw, u8 command, int size, + union i2c_smbus_data *data) +{ + struct scx200_acb_iface *iface = i2c_get_adapdata(adapter); + int len; + u8 *buffer; + u16 cur_word; + int rc; + + switch (size) { + case I2C_SMBUS_QUICK: + len = 0; + buffer = NULL; + break; + case I2C_SMBUS_BYTE: + if (rw == I2C_SMBUS_READ) { + len = 1; + buffer = &data->byte; + } else { + len = 1; + buffer = &command; + } + break; + case I2C_SMBUS_BYTE_DATA: + len = 1; + buffer = &data->byte; + break; + case I2C_SMBUS_WORD_DATA: + len = 2; + cur_word = cpu_to_le16(data->word); + buffer = (u8 *)&cur_word; + break; + case I2C_SMBUS_BLOCK_DATA: + len = data->block[0]; + buffer = &data->block[1]; + break; + default: + return -EINVAL; + } + + DBG("size=%d, address=0x%x, command=0x%x, len=%d, read=%d\n", + size, address, command, len, rw == I2C_SMBUS_READ); + + if (!len && rw == I2C_SMBUS_READ) { + dev_warn(&adapter->dev, "zero length read\n"); + return -EINVAL; + } + + if (len && !buffer) { + dev_warn(&adapter->dev, "nonzero length but no buffer\n"); + return -EFAULT; + } + + down(&iface->sem); + + iface->address_byte = address<<1; + if (rw == I2C_SMBUS_READ) + iface->address_byte |= 1; + iface->command = command; + iface->ptr = buffer; + iface->len = len; + iface->result = -EINVAL; + iface->needs_reset = 0; + + outb(inb(ACBCTL1) | ACBCTL1_START, ACBCTL1); + + if (size == I2C_SMBUS_QUICK || size == I2C_SMBUS_BYTE) + iface->state = state_quick; + else + iface->state = state_address; + +#ifdef POLLED_MODE + while (iface->state != state_idle) + scx200_acb_poll(iface); +#else /* POLLED_MODE */ +#error Interrupt driven mode not implemented +#endif /* POLLED_MODE */ + + if (iface->needs_reset) + scx200_acb_reset(iface); + + rc = iface->result; + + up(&iface->sem); + + if (rc == 0 && size == I2C_SMBUS_WORD_DATA && rw == I2C_SMBUS_READ) + data->word = le16_to_cpu(cur_word); + +#ifdef DEBUG + DBG(": transfer done, result: %d", rc); + if (buffer) { + int i; + printk(" data:"); + for (i = 0; i < len; ++i) + printk(" %02x", buffer[i]); + } + printk("\n"); +#endif + + return rc; +} + +static u32 scx200_acb_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +/* For now, we only handle combined mode (smbus) */ +static struct i2c_algorithm scx200_acb_algorithm = { + .name = "NatSemi SCx200 ACCESS.bus", + .id = I2C_ALGO_SMBUS, + .smbus_xfer = scx200_acb_smbus_xfer, + .functionality = scx200_acb_func, +}; + +static struct scx200_acb_iface *scx200_acb_list; + +static int scx200_acb_probe(struct scx200_acb_iface *iface) +{ + u8 val; + + /* Disable the ACCESS.bus device and Configure the SCL + frequency: 16 clock cycles */ + outb(0x70, ACBCTL2); + + if (inb(ACBCTL2) != 0x70) { + DBG("ACBCTL2 readback failed\n"); + return -ENXIO; + } + + outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1); + + val = inb(ACBCTL1); + if (val) { + DBG("disabled, but ACBCTL1=0x%02x\n", val); + return -ENXIO; + } + + outb(inb(ACBCTL2) | ACBCTL2_ENABLE, ACBCTL2); + + outb(inb(ACBCTL1) | ACBCTL1_NMINTE, ACBCTL1); + + val = inb(ACBCTL1); + if ((val & ACBCTL1_NMINTE) != ACBCTL1_NMINTE) { + DBG("enabled, but NMINTE won't be set, ACBCTL1=0x%02x\n", val); + return -ENXIO; + } + + return 0; +} + +static int __init scx200_acb_create(int base, int index) +{ + struct scx200_acb_iface *iface; + struct i2c_adapter *adapter; + int rc = 0; + char description[64]; + + iface = kmalloc(sizeof(*iface), GFP_KERNEL); + if (!iface) { + printk(KERN_ERR NAME ": can't allocate memory\n"); + rc = -ENOMEM; + goto errout; + } + + memset(iface, 0, sizeof(*iface)); + adapter = &iface->adapter; + i2c_set_adapdata(adapter, iface); + snprintf(adapter->name, I2C_NAME_SIZE, "SCx200 ACB%d", index); + adapter->owner = THIS_MODULE; + adapter->id = I2C_ALGO_SMBUS; + adapter->algo = &scx200_acb_algorithm; + adapter->class = I2C_CLASS_HWMON; + + init_MUTEX(&iface->sem); + + snprintf(description, sizeof(description), "NatSemi SCx200 ACCESS.bus [%s]", adapter->name); + if (request_region(base, 8, description) == 0) { + dev_err(&adapter->dev, "can't allocate io 0x%x-0x%x\n", + base, base + 8-1); + rc = -EBUSY; + goto errout; + } + iface->base = base; + + rc = scx200_acb_probe(iface); + if (rc) { + dev_warn(&adapter->dev, "probe failed\n"); + goto errout; + } + + scx200_acb_reset(iface); + + if (i2c_add_adapter(adapter) < 0) { + dev_err(&adapter->dev, "failed to register\n"); + rc = -ENODEV; + goto errout; + } + + lock_kernel(); + iface->next = scx200_acb_list; + scx200_acb_list = iface; + unlock_kernel(); + + return 0; + + errout: + if (iface) { + if (iface->base) + release_region(iface->base, 8); + kfree(iface); + } + return rc; +} + +static struct pci_device_id scx200[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, + { }, +}; + +static int __init scx200_acb_init(void) +{ + int i; + int rc; + + pr_debug(NAME ": NatSemi SCx200 ACCESS.bus Driver\n"); + + /* Verify that this really is a SCx200 processor */ + if (pci_dev_present(scx200) == 0) + return -ENODEV; + + rc = -ENXIO; + for (i = 0; i < MAX_DEVICES; ++i) { + if (base[i] > 0) + rc = scx200_acb_create(base[i], i); + } + if (scx200_acb_list) + return 0; + return rc; +} + +static void __exit scx200_acb_cleanup(void) +{ + struct scx200_acb_iface *iface; + lock_kernel(); + while ((iface = scx200_acb_list) != NULL) { + scx200_acb_list = iface->next; + unlock_kernel(); + + i2c_del_adapter(&iface->adapter); + release_region(iface->base, 8); + kfree(iface); + lock_kernel(); + } + unlock_kernel(); +} + +module_init(scx200_acb_init); +module_exit(scx200_acb_cleanup); + +/* + Local variables: + compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules" + c-basic-offset: 8 + End: +*/ + diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c new file mode 100644 index 00000000000..27fbfecc414 --- /dev/null +++ b/drivers/i2c/busses/scx200_i2c.c @@ -0,0 +1,131 @@ +/* linux/drivers/i2c/scx200_i2c.c + + Copyright (c) 2001,2002 Christer Weinigel <wingel@nano-system.com> + + National Semiconductor SCx200 I2C bus on GPIO pins + + Based on i2c-velleman.c Copyright (C) 1995-96, 2000 Simon G. Vogl + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +*/ + +#include <linux/config.h> +#include <linux/module.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <asm/io.h> + +#include <linux/scx200_gpio.h> + +#define NAME "scx200_i2c" + +MODULE_AUTHOR("Christer Weinigel <wingel@nano-system.com>"); +MODULE_DESCRIPTION("NatSemi SCx200 I2C Driver"); +MODULE_LICENSE("GPL"); + +static int scl = CONFIG_SCx200_I2C_SCL; +static int sda = CONFIG_SCx200_I2C_SDA; + +module_param(scl, int, 0); +MODULE_PARM_DESC(scl, "GPIO line for SCL"); +module_param(sda, int, 0); +MODULE_PARM_DESC(sda, "GPIO line for SDA"); + +static void scx200_i2c_setscl(void *data, int state) +{ + scx200_gpio_set(scl, state); +} + +static void scx200_i2c_setsda(void *data, int state) +{ + scx200_gpio_set(sda, state); +} + +static int scx200_i2c_getscl(void *data) +{ + return scx200_gpio_get(scl); +} + +static int scx200_i2c_getsda(void *data) +{ + return scx200_gpio_get(sda); +} + +/* ------------------------------------------------------------------------ + * Encapsulate the above functions in the correct operations structure. + * This is only done when more than one hardware adapter is supported. + */ + +static struct i2c_algo_bit_data scx200_i2c_data = { + NULL, + scx200_i2c_setsda, + scx200_i2c_setscl, + scx200_i2c_getsda, + scx200_i2c_getscl, + 10, 10, 100, /* waits, timeout */ +}; + +static struct i2c_adapter scx200_i2c_ops = { + .owner = THIS_MODULE, + .algo_data = &scx200_i2c_data, + .name = "NatSemi SCx200 I2C", +}; + +static int scx200_i2c_init(void) +{ + pr_debug(NAME ": NatSemi SCx200 I2C Driver\n"); + + if (!scx200_gpio_present()) { + printk(KERN_ERR NAME ": no SCx200 gpio pins available\n"); + return -ENODEV; + } + + pr_debug(NAME ": SCL=GPIO%02u, SDA=GPIO%02u\n", scl, sda); + + if (scl == -1 || sda == -1 || scl == sda) { + printk(KERN_ERR NAME ": scl and sda must be specified\n"); + return -EINVAL; + } + + /* Configure GPIOs as open collector outputs */ + scx200_gpio_configure(scl, ~2, 5); + scx200_gpio_configure(sda, ~2, 5); + + if (i2c_bit_add_bus(&scx200_i2c_ops) < 0) { + printk(KERN_ERR NAME ": adapter %s registration failed\n", + scx200_i2c_ops.name); + return -ENODEV; + } + + return 0; +} + +static void scx200_i2c_cleanup(void) +{ + i2c_bit_del_bus(&scx200_i2c_ops); +} + +module_init(scx200_i2c_init); +module_exit(scx200_i2c_cleanup); + +/* + Local variables: + compile-command: "make -k -C ../.. SUBDIRS=drivers/i2c modules" + c-basic-offset: 8 + End: +*/ |