summaryrefslogtreecommitdiff
path: root/drivers/char/specialix_io8.h
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/char/specialix_io8.h')
-rw-r--r--drivers/char/specialix_io8.h149
1 files changed, 149 insertions, 0 deletions
diff --git a/drivers/char/specialix_io8.h b/drivers/char/specialix_io8.h
new file mode 100644
index 00000000000..895bd90de36
--- /dev/null
+++ b/drivers/char/specialix_io8.h
@@ -0,0 +1,149 @@
+/*
+ * linux/drivers/char/specialix_io8.h --
+ * Specialix IO8+ multiport serial driver.
+ *
+ * Copyright (C) 1997 Roger Wolff (R.E.Wolff@BitWizard.nl)
+ * Copyright (C) 1994-1996 Dmitry Gorodchanin (pgmdsg@ibi.com)
+ *
+ *
+ * Specialix pays for the development and support of this driver.
+ * Please DO contact io8-linux@specialix.co.uk if you require
+ * support.
+ *
+ * This driver was developped in the BitWizard linux device
+ * driver service. If you require a linux device driver for your
+ * product, please contact devices@BitWizard.nl for a quote.
+ *
+ * This code is firmly based on the riscom/8 serial driver,
+ * written by Dmitry Gorodchanin. The specialix IO8+ card
+ * programming information was obtained from the CL-CD1865 Data
+ * Book, and Specialix document number 6200059: IO8+ Hardware
+ * Functional Specification.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be
+ * useful, but WITHOUT ANY WARRANTY; without even the implied
+ * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR
+ * PURPOSE. See the GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this program; if not, write to the Free
+ * Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139,
+ * USA.
+ * */
+
+#ifndef __LINUX_SPECIALIX_H
+#define __LINUX_SPECIALIX_H
+
+#include <linux/serial.h>
+
+#ifdef __KERNEL__
+
+/* You can have max 4 ISA cards in one PC, and I recommend not much
+more than a few PCI versions of the card. */
+
+#define SX_NBOARD 8
+
+/* NOTE: Specialix decoder recognizes 4 addresses, but only two are used.... */
+#define SX_IO_SPACE 4
+/* The PCI version decodes 8 addresses, but still only 2 are used. */
+#define SX_PCI_IO_SPACE 8
+
+/* eight ports per board. */
+#define SX_NPORT 8
+#define SX_BOARD(line) ((line) / SX_NPORT)
+#define SX_PORT(line) ((line) & (SX_NPORT - 1))
+
+
+#define SX_DATA_REG 0 /* Base+0 : Data register */
+#define SX_ADDR_REG 1 /* base+1 : Address register. */
+
+#define MHz *1000000 /* I'm ashamed of myself. */
+
+/* On-board oscillator frequency */
+#define SX_OSCFREQ (25 MHz/2)
+/* There is a 25MHz crystal on the board, but the chip is in /2 mode */
+
+
+/* Ticks per sec. Used for setting receiver timeout and break length */
+#define SPECIALIX_TPS 4000
+
+/* Yeah, after heavy testing I decided it must be 6.
+ * Sure, You can change it if needed.
+ */
+#define SPECIALIX_RXFIFO 6 /* Max. receiver FIFO size (1-8) */
+
+#define SPECIALIX_MAGIC 0x0907
+
+#define SX_CCR_TIMEOUT 10000 /* CCR timeout. You may need to wait upto
+ 10 milliseconds before the internal
+ processor is available again after
+ you give it a command */
+
+#define SX_IOBASE1 0x100
+#define SX_IOBASE2 0x180
+#define SX_IOBASE3 0x250
+#define SX_IOBASE4 0x260
+
+struct specialix_board {
+ unsigned long flags;
+ unsigned short base;
+ unsigned char irq;
+ //signed char count;
+ int count;
+ unsigned char DTR;
+ int reg;
+ spinlock_t lock;
+};
+
+#define SX_BOARD_PRESENT 0x00000001
+#define SX_BOARD_ACTIVE 0x00000002
+#define SX_BOARD_IS_PCI 0x00000004
+
+
+struct specialix_port {
+ int magic;
+ int baud_base;
+ int flags;
+ struct tty_struct * tty;
+ int count;
+ int blocked_open;
+ ulong event;
+ int timeout;
+ int close_delay;
+ unsigned char * xmit_buf;
+ int custom_divisor;
+ int xmit_head;
+ int xmit_tail;
+ int xmit_cnt;
+ wait_queue_head_t open_wait;
+ wait_queue_head_t close_wait;
+ struct work_struct tqueue;
+ struct work_struct tqueue_hangup;
+ short wakeup_chars;
+ short break_length;
+ unsigned short closing_wait;
+ unsigned char mark_mask;
+ unsigned char IER;
+ unsigned char MSVR;
+ unsigned char COR2;
+ unsigned long overrun;
+ unsigned long hits[10];
+ spinlock_t lock;
+};
+
+#endif /* __KERNEL__ */
+#endif /* __LINUX_SPECIALIX_H */
+
+
+
+
+
+
+
+
+