diff options
Diffstat (limited to 'arch/mips/sibyte/sb1250/bus_watcher.c')
| -rw-r--r-- | arch/mips/sibyte/sb1250/bus_watcher.c | 259 |
1 files changed, 259 insertions, 0 deletions
diff --git a/arch/mips/sibyte/sb1250/bus_watcher.c b/arch/mips/sibyte/sb1250/bus_watcher.c new file mode 100644 index 00000000000..182a16f42e2 --- /dev/null +++ b/arch/mips/sibyte/sb1250/bus_watcher.c @@ -0,0 +1,259 @@ +/* + * Copyright (C) 2002,2003 Broadcom Corporation + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ + +/* + * The Bus Watcher monitors internal bus transactions and maintains + * counts of transactions with error status, logging details and + * causing one of several interrupts. This driver provides a handler + * for those interrupts which aggregates the counts (to avoid + * saturating the 8-bit counters) and provides a presence in + * /proc/bus_watcher if PROC_FS is on. + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/sched.h> +#include <linux/proc_fs.h> +#include <asm/system.h> +#include <asm/io.h> + +#include <asm/sibyte/sb1250.h> +#include <asm/sibyte/sb1250_regs.h> +#include <asm/sibyte/sb1250_int.h> +#include <asm/sibyte/sb1250_scd.h> + + +struct bw_stats_struct { + uint64_t status; + uint32_t l2_err; + uint32_t memio_err; + int status_printed; + unsigned long l2_cor_d; + unsigned long l2_bad_d; + unsigned long l2_cor_t; + unsigned long l2_bad_t; + unsigned long mem_cor_d; + unsigned long mem_bad_d; + unsigned long bus_error; +} bw_stats; + + +static void print_summary(uint32_t status, uint32_t l2_err, + uint32_t memio_err) +{ + printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err); + printk("\nLast recorded signature:\n"); + printk("Request %02x from %d, answered by %d with Dcode %d\n", + (unsigned int)(G_SCD_BERR_TID(status) & 0x3f), + (int)(G_SCD_BERR_TID(status) >> 6), + (int)G_SCD_BERR_RID(status), + (int)G_SCD_BERR_DCODE(status)); +} + +/* + * check_bus_watcher is exported for use in situations where we want + * to see the most recent status of the bus watcher, which might have + * already been destructively read out of the registers. + * + * notes: this is currently used by the cache error handler + * should provide locking against the interrupt handler + */ +void check_bus_watcher(void) +{ + u32 status, l2_err, memio_err; + +#ifdef CONFIG_SB1_PASS_1_WORKAROUNDS + /* Destructive read, clears register and interrupt */ + status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS)); +#else + /* Use non-destructive register */ + status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS_DEBUG)); +#endif + if (!(status & 0x7fffffff)) { + printk("Using last values reaped by bus watcher driver\n"); + status = bw_stats.status; + l2_err = bw_stats.l2_err; + memio_err = bw_stats.memio_err; + } else { + l2_err = csr_in32(IOADDR(A_BUS_L2_ERRORS)); + memio_err = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); + } + if (status & ~(1UL << 31)) + print_summary(status, l2_err, memio_err); + else + printk("Bus watcher indicates no error\n"); +} + +static int bw_print_buffer(char *page, struct bw_stats_struct *stats) +{ + int len; + + len = sprintf(page, "SiByte Bus Watcher statistics\n"); + len += sprintf(page+len, "-----------------------------\n"); + len += sprintf(page+len, "L2-d-cor %8ld\nL2-d-bad %8ld\n", + stats->l2_cor_d, stats->l2_bad_d); + len += sprintf(page+len, "L2-t-cor %8ld\nL2-t-bad %8ld\n", + stats->l2_cor_t, stats->l2_bad_t); + len += sprintf(page+len, "MC-d-cor %8ld\nMC-d-bad %8ld\n", + stats->mem_cor_d, stats->mem_bad_d); + len += sprintf(page+len, "IO-err %8ld\n", stats->bus_error); + len += sprintf(page+len, "\nLast recorded signature:\n"); + len += sprintf(page+len, "Request %02x from %d, answered by %d with Dcode %d\n", + (unsigned int)(G_SCD_BERR_TID(stats->status) & 0x3f), + (int)(G_SCD_BERR_TID(stats->status) >> 6), + (int)G_SCD_BERR_RID(stats->status), + (int)G_SCD_BERR_DCODE(stats->status)); + /* XXXKW indicate multiple errors between printings, or stats + collection (or both)? */ + if (stats->status & M_SCD_BERR_MULTERRS) + len += sprintf(page+len, "Multiple errors observed since last check.\n"); + if (stats->status_printed) { + len += sprintf(page+len, "(no change since last printing)\n"); + } else { + stats->status_printed = 1; + } + + return len; +} + +#ifdef CONFIG_PROC_FS + +/* For simplicity, I want to assume a single read is required each + time */ +static int bw_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int len; + + if (off == 0) { + len = bw_print_buffer(page, data); + *start = page; + } else { + len = 0; + *eof = 1; + } + return len; +} + +static void create_proc_decoder(struct bw_stats_struct *stats) +{ + struct proc_dir_entry *ent; + + ent = create_proc_read_entry("bus_watcher", S_IWUSR | S_IRUGO, NULL, + bw_read_proc, stats); + if (!ent) { + printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n"); + return; + } +} + +#endif /* CONFIG_PROC_FS */ + +/* + * sibyte_bw_int - handle bus watcher interrupts and accumulate counts + * + * notes: possible re-entry due to multiple sources + * should check/indicate saturation + */ +static irqreturn_t sibyte_bw_int(int irq, void *data, struct pt_regs *regs) +{ + struct bw_stats_struct *stats = data; + unsigned long cntr; +#ifdef CONFIG_SIBYTE_BW_TRACE + int i; +#endif +#ifndef CONFIG_PROC_FS + char bw_buf[1024]; +#endif + +#ifdef CONFIG_SIBYTE_BW_TRACE + csr_out32(M_SCD_TRACE_CFG_FREEZE, IOADDR(A_SCD_TRACE_CFG)); + csr_out32(M_SCD_TRACE_CFG_START_READ, IOADDR(A_SCD_TRACE_CFG)); + + for (i=0; i<256*6; i++) + printk("%016llx\n", + (unsigned long long)bus_readq(IOADDR(A_SCD_TRACE_READ))); + + csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG)); +#endif + + /* Destructive read, clears register and interrupt */ + stats->status = csr_in32(IOADDR(A_SCD_BUS_ERR_STATUS)); + stats->status_printed = 0; + + stats->l2_err = cntr = csr_in32(IOADDR(A_BUS_L2_ERRORS)); + stats->l2_cor_d += G_SCD_L2ECC_CORR_D(cntr); + stats->l2_bad_d += G_SCD_L2ECC_BAD_D(cntr); + stats->l2_cor_t += G_SCD_L2ECC_CORR_T(cntr); + stats->l2_bad_t += G_SCD_L2ECC_BAD_T(cntr); + csr_out32(0, IOADDR(A_BUS_L2_ERRORS)); + + stats->memio_err = cntr = csr_in32(IOADDR(A_BUS_MEM_IO_ERRORS)); + stats->mem_cor_d += G_SCD_MEM_ECC_CORR(cntr); + stats->mem_bad_d += G_SCD_MEM_ECC_BAD(cntr); + stats->bus_error += G_SCD_MEM_BUSERR(cntr); + csr_out32(0, IOADDR(A_BUS_MEM_IO_ERRORS)); + +#ifndef CONFIG_PROC_FS + bw_print_buffer(bw_buf, stats); + printk(bw_buf); +#endif + + return IRQ_HANDLED; +} + +int __init sibyte_bus_watcher(void) +{ + memset(&bw_stats, 0, sizeof(struct bw_stats_struct)); + bw_stats.status_printed = 1; + + if (request_irq(K_INT_BAD_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) { + printk("Failed to register bus watcher BAD_ECC irq\n"); + return -1; + } + if (request_irq(K_INT_COR_ECC, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) { + free_irq(K_INT_BAD_ECC, &bw_stats); + printk("Failed to register bus watcher COR_ECC irq\n"); + return -1; + } + if (request_irq(K_INT_IO_BUS, sibyte_bw_int, 0, "Bus watcher", &bw_stats)) { + free_irq(K_INT_BAD_ECC, &bw_stats); + free_irq(K_INT_COR_ECC, &bw_stats); + printk("Failed to register bus watcher IO_BUS irq\n"); + return -1; + } + +#ifdef CONFIG_PROC_FS + create_proc_decoder(&bw_stats); +#endif + +#ifdef CONFIG_SIBYTE_BW_TRACE + csr_out32((M_SCD_TRSEQ_ASAMPLE | M_SCD_TRSEQ_DSAMPLE | + K_SCD_TRSEQ_TRIGGER_ALL), + IOADDR(A_SCD_TRACE_SEQUENCE_0)); + csr_out32(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); + csr_out32(M_SCD_TRACE_CFG_START, IOADDR(A_SCD_TRACE_CFG)); +#endif + + return 0; +} + +__initcall(sibyte_bus_watcher); |