summaryrefslogtreecommitdiff
path: root/arch/i386/kernel/acpi/wakeup.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/i386/kernel/acpi/wakeup.S')
-rw-r--r--arch/i386/kernel/acpi/wakeup.S318
1 files changed, 318 insertions, 0 deletions
diff --git a/arch/i386/kernel/acpi/wakeup.S b/arch/i386/kernel/acpi/wakeup.S
new file mode 100644
index 00000000000..39d32484f6f
--- /dev/null
+++ b/arch/i386/kernel/acpi/wakeup.S
@@ -0,0 +1,318 @@
+.text
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/page.h>
+
+#
+# wakeup_code runs in real mode, and at unknown address (determined at run-time).
+# Therefore it must only use relative jumps/calls.
+#
+# Do we need to deal with A20? It is okay: ACPI specs says A20 must be enabled
+#
+# If physical address of wakeup_code is 0x12345, BIOS should call us with
+# cs = 0x1234, eip = 0x05
+#
+
+ALIGN
+ .align 4096
+ENTRY(wakeup_start)
+wakeup_code:
+ wakeup_code_start = .
+ .code16
+
+ movw $0xb800, %ax
+ movw %ax,%fs
+ movw $0x0e00 + 'L', %fs:(0x10)
+
+ cli
+ cld
+
+ # setup data segment
+ movw %cs, %ax
+ movw %ax, %ds # Make ds:0 point to wakeup_start
+ movw %ax, %ss
+ mov $(wakeup_stack - wakeup_code), %sp # Private stack is needed for ASUS board
+ movw $0x0e00 + 'S', %fs:(0x12)
+
+ pushl $0 # Kill any dangerous flags
+ popfl
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ testl $1, video_flags - wakeup_code
+ jz 1f
+ lcall $0xc000,$3
+ movw %cs, %ax
+ movw %ax, %ds # Bios might have played with that
+ movw %ax, %ss
+1:
+
+ testl $2, video_flags - wakeup_code
+ jz 1f
+ mov video_mode - wakeup_code, %ax
+ call mode_set
+1:
+
+ # set up page table
+ movl $swapper_pg_dir-__PAGE_OFFSET, %eax
+ movl %eax, %cr3
+
+ testl $1, real_efer_save_restore - wakeup_code
+ jz 4f
+ # restore efer setting
+ movl real_save_efer_edx - wakeup_code, %edx
+ movl real_save_efer_eax - wakeup_code, %eax
+ mov $0xc0000080, %ecx
+ wrmsr
+4:
+ # make sure %cr4 is set correctly (features, etc)
+ movl real_save_cr4 - wakeup_code, %eax
+ movl %eax, %cr4
+ movw $0xb800, %ax
+ movw %ax,%fs
+ movw $0x0e00 + 'i', %fs:(0x12)
+
+ # need a gdt
+ lgdt real_save_gdt - wakeup_code
+
+ movl real_save_cr0 - wakeup_code, %eax
+ movl %eax, %cr0
+ jmp 1f
+1:
+ movw $0x0e00 + 'n', %fs:(0x14)
+
+ movl real_magic - wakeup_code, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_real_magic
+
+ ljmpl $__KERNEL_CS,$wakeup_pmode_return
+
+real_save_gdt: .word 0
+ .long 0
+real_save_cr0: .long 0
+real_save_cr3: .long 0
+real_save_cr4: .long 0
+real_magic: .long 0
+video_mode: .long 0
+video_flags: .long 0
+real_efer_save_restore: .long 0
+real_save_efer_edx: .long 0
+real_save_efer_eax: .long 0
+
+bogus_real_magic:
+ movw $0x0e00 + 'B', %fs:(0x12)
+ jmp bogus_real_magic
+
+/* This code uses an extended set of video mode numbers. These include:
+ * Aliases for standard modes
+ * NORMAL_VGA (-1)
+ * EXTENDED_VGA (-2)
+ * ASK_VGA (-3)
+ * Video modes numbered by menu position -- NOT RECOMMENDED because of lack
+ * of compatibility when extending the table. These are between 0x00 and 0xff.
+ */
+#define VIDEO_FIRST_MENU 0x0000
+
+/* Standard BIOS video modes (BIOS number + 0x0100) */
+#define VIDEO_FIRST_BIOS 0x0100
+
+/* VESA BIOS video modes (VESA number + 0x0200) */
+#define VIDEO_FIRST_VESA 0x0200
+
+/* Video7 special modes (BIOS number + 0x0900) */
+#define VIDEO_FIRST_V7 0x0900
+
+# Setting of user mode (AX=mode ID) => CF=success
+mode_set:
+ movw %ax, %bx
+#if 0
+ cmpb $0xff, %ah
+ jz setalias
+
+ testb $VIDEO_RECALC>>8, %ah
+ jnz _setrec
+
+ cmpb $VIDEO_FIRST_RESOLUTION>>8, %ah
+ jnc setres
+
+ cmpb $VIDEO_FIRST_SPECIAL>>8, %ah
+ jz setspc
+
+ cmpb $VIDEO_FIRST_V7>>8, %ah
+ jz setv7
+#endif
+
+ cmpb $VIDEO_FIRST_VESA>>8, %ah
+ jnc check_vesa
+#if 0
+ orb %ah, %ah
+ jz setmenu
+#endif
+
+ decb %ah
+# jz setbios Add bios modes later
+
+setbad: clc
+ ret
+
+check_vesa:
+ subb $VIDEO_FIRST_VESA>>8, %bh
+ orw $0x4000, %bx # Use linear frame buffer
+ movw $0x4f02, %ax # VESA BIOS mode set call
+ int $0x10
+ cmpw $0x004f, %ax # AL=4f if implemented
+ jnz _setbad # AH=0 if OK
+
+ stc
+ ret
+
+_setbad: jmp setbad
+
+ .code32
+ ALIGN
+
+.org 0x800
+wakeup_stack_begin: # Stack grows down
+
+.org 0xff0 # Just below end of page
+wakeup_stack:
+ENTRY(wakeup_end)
+
+.org 0x1000
+
+wakeup_pmode_return:
+ movw $__KERNEL_DS, %ax
+ movw %ax, %ss
+ movw %ax, %ds
+ movw %ax, %es
+ movw %ax, %fs
+ movw %ax, %gs
+ movw $0x0e00 + 'u', 0xb8016
+
+ # reload the gdt, as we need the full 32 bit address
+ lgdt saved_gdt
+ lidt saved_idt
+ lldt saved_ldt
+ ljmp $(__KERNEL_CS),$1f
+1:
+ movl %cr3, %eax
+ movl %eax, %cr3
+ wbinvd
+
+ # and restore the stack ... but you need gdt for this to work
+ movl saved_context_esp, %esp
+
+ movl %cs:saved_magic, %eax
+ cmpl $0x12345678, %eax
+ jne bogus_magic
+
+ # jump to place where we left off
+ movl saved_eip,%eax
+ jmp *%eax
+
+bogus_magic:
+ movw $0x0e00 + 'B', 0xb8018
+ jmp bogus_magic
+
+
+##
+# acpi_copy_wakeup_routine
+#
+# Copy the above routine to low memory.
+#
+# Parameters:
+# %eax: place to copy wakeup routine to
+#
+# Returned address is location of code in low memory (past data and stack)
+#
+ENTRY(acpi_copy_wakeup_routine)
+
+ sgdt saved_gdt
+ sidt saved_idt
+ sldt saved_ldt
+ str saved_tss
+
+ movl nx_enabled, %edx
+ movl %edx, real_efer_save_restore - wakeup_start (%eax)
+ testl $1, real_efer_save_restore - wakeup_start (%eax)
+ jz 2f
+ # save efer setting
+ pushl %eax
+ movl %eax, %ebx
+ mov $0xc0000080, %ecx
+ rdmsr
+ movl %edx, real_save_efer_edx - wakeup_start (%ebx)
+ movl %eax, real_save_efer_eax - wakeup_start (%ebx)
+ popl %eax
+2:
+
+ movl %cr3, %edx
+ movl %edx, real_save_cr3 - wakeup_start (%eax)
+ movl %cr4, %edx
+ movl %edx, real_save_cr4 - wakeup_start (%eax)
+ movl %cr0, %edx
+ movl %edx, real_save_cr0 - wakeup_start (%eax)
+ sgdt real_save_gdt - wakeup_start (%eax)
+
+ movl saved_videomode, %edx
+ movl %edx, video_mode - wakeup_start (%eax)
+ movl acpi_video_flags, %edx
+ movl %edx, video_flags - wakeup_start (%eax)
+ movl $0x12345678, real_magic - wakeup_start (%eax)
+ movl $0x12345678, saved_magic
+ ret
+
+.data
+ALIGN
+ENTRY(saved_magic) .long 0
+ENTRY(saved_eip) .long 0
+
+save_registers:
+ leal 4(%esp), %eax
+ movl %eax, saved_context_esp
+ movl %ebx, saved_context_ebx
+ movl %ebp, saved_context_ebp
+ movl %esi, saved_context_esi
+ movl %edi, saved_context_edi
+ pushfl ; popl saved_context_eflags
+
+ movl $ret_point, saved_eip
+ ret
+
+
+restore_registers:
+ movl saved_context_ebp, %ebp
+ movl saved_context_ebx, %ebx
+ movl saved_context_esi, %esi
+ movl saved_context_edi, %edi
+ pushl saved_context_eflags ; popfl
+ ret
+
+ENTRY(do_suspend_lowlevel)
+ call save_processor_state
+ call save_registers
+ pushl $3
+ call acpi_enter_sleep_state
+ addl $4, %esp
+ ret
+ .p2align 4,,7
+ret_point:
+ call restore_registers
+ call restore_processor_state
+ ret
+
+ENTRY(do_suspend_lowlevel_s4bios)
+ call save_processor_state
+ call save_registers
+ call acpi_enter_sleep_state_s4bios
+ ret
+
+ALIGN
+# saved registers
+saved_gdt: .long 0,0
+saved_idt: .long 0,0
+saved_ldt: .long 0
+saved_tss: .long 0
+