From 669a5db411d85a14f86cd92bc16bf7ab5b8aa235 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Tue, 29 Aug 2006 18:12:40 -0400 Subject: [libata] Add a bunch of PATA drivers. The vast majority of drivers and changes are from Alan Cox. Albert Lee contributed and maintains pata_pdc2027x. Adrian Bunk, Andrew Morton, and Tejun Heo contributed various minor fixes and updates. Signed-off-by: Jeff Garzik --- drivers/ata/pata_efar.c | 342 ++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 342 insertions(+) create mode 100644 drivers/ata/pata_efar.c (limited to 'drivers/ata/pata_efar.c') diff --git a/drivers/ata/pata_efar.c b/drivers/ata/pata_efar.c new file mode 100644 index 00000000000..c30bc181304 --- /dev/null +++ b/drivers/ata/pata_efar.c @@ -0,0 +1,342 @@ +/* + * pata_efar.c - EFAR PIIX clone controller driver + * + * (C) 2005 Red Hat + * + * Some parts based on ata_piix.c by Jeff Garzik and others. + * + * The EFAR is a PIIX4 clone with UDMA66 support. Unlike the later + * Intel ICH controllers the EFAR widened the UDMA mode register bits + * and doesn't require the funky clock selection. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRV_NAME "pata_efar" +#define DRV_VERSION "0.4.1" + +/** + * efar_pre_reset - check for 40/80 pin + * @ap: Port + * + * Perform cable detection for the EFAR ATA interface. This is + * different to the PIIX arrangement + */ + +static int efar_pre_reset(struct ata_port *ap) +{ + static const struct pci_bits efar_enable_bits[] = { + { 0x41U, 1U, 0x80UL, 0x80UL }, /* port 0 */ + { 0x43U, 1U, 0x80UL, 0x80UL }, /* port 1 */ + }; + + struct pci_dev *pdev = to_pci_dev(ap->host->dev); + u8 tmp; + + if (!pci_test_config_bits(pdev, &efar_enable_bits[ap->port_no])) { + ata_port_disable(ap); + printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id); + return 0; + } + pci_read_config_byte(pdev, 0x47, &tmp); + if (tmp & (2 >> ap->port_no)) + ap->cbl = ATA_CBL_PATA40; + else + ap->cbl = ATA_CBL_PATA80; + return ata_std_prereset(ap); +} + +/** + * efar_probe_reset - Probe specified port on PATA host controller + * @ap: Port to probe + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_error_handler(struct ata_port *ap) +{ + ata_bmdma_drive_eh(ap, efar_pre_reset, ata_std_softreset, NULL, ata_std_postreset); +} + +/** + * efar_set_piomode - Initialize host controller PATA PIO timings + * @ap: Port whose timings we are configuring + * @adev: um + * + * Set PIO mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_piomode (struct ata_port *ap, struct ata_device *adev) +{ + unsigned int pio = adev->pio_mode - XFER_PIO_0; + struct pci_dev *dev = to_pci_dev(ap->host->dev); + unsigned int idetm_port= ap->port_no ? 0x42 : 0x40; + u16 idetm_data; + int control = 0; + + /* + * See Intel Document 298600-004 for the timing programing rules + * for PIIX/ICH. The EFAR is a clone so very similar + */ + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + if (pio > 2) + control |= 1; /* TIME1 enable */ + if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */ + control |= 2; /* IE enable */ + /* Intel specifies that the PPE functionality is for disk only */ + if (adev->class == ATA_DEV_ATA) + control |= 4; /* PPE enable */ + + pci_read_config_word(dev, idetm_port, &idetm_data); + + /* Enable PPE, IE and TIME as appropriate */ + + if (adev->devno == 0) { + idetm_data &= 0xCCF0; + idetm_data |= control; + idetm_data |= (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } else { + int shift = 4 * ap->port_no; + u8 slave_data; + + idetm_data &= 0xCC0F; + idetm_data |= (control << 4); + + /* Slave timing in seperate register */ + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= 0x0F << shift; + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << shift; + pci_write_config_byte(dev, 0x44, slave_data); + } + + idetm_data |= 0x4000; /* Ensure SITRE is enabled */ + pci_write_config_word(dev, idetm_port, idetm_data); +} + +/** + * efar_set_dmamode - Initialize host controller PATA DMA timings + * @ap: Port whose timings we are configuring + * @adev: Device to program + * + * Set UDMA/MWDMA mode for device, in host controller PCI config space. + * + * LOCKING: + * None (inherited from caller). + */ + +static void efar_set_dmamode (struct ata_port *ap, struct ata_device *adev) +{ + struct pci_dev *dev = to_pci_dev(ap->host->dev); + u8 master_port = ap->port_no ? 0x42 : 0x40; + u16 master_data; + u8 speed = adev->dma_mode; + int devid = adev->devno + 2 * ap->port_no; + u8 udma_enable; + + static const /* ISP RTC */ + u8 timings[][2] = { { 0, 0 }, + { 0, 0 }, + { 1, 0 }, + { 2, 1 }, + { 2, 3 }, }; + + pci_read_config_word(dev, master_port, &master_data); + pci_read_config_byte(dev, 0x48, &udma_enable); + + if (speed >= XFER_UDMA_0) { + unsigned int udma = adev->dma_mode - XFER_UDMA_0; + u16 udma_timing; + + udma_enable |= (1 << devid); + + /* Load the UDMA mode number */ + pci_read_config_word(dev, 0x4A, &udma_timing); + udma_timing &= ~(7 << (4 * devid)); + udma_timing |= udma << (4 * devid); + pci_write_config_word(dev, 0x4A, udma_timing); + } else { + /* + * MWDMA is driven by the PIO timings. We must also enable + * IORDY unconditionally along with TIME1. PPE has already + * been set when the PIO timing was set. + */ + unsigned int mwdma = adev->dma_mode - XFER_MW_DMA_0; + unsigned int control; + u8 slave_data; + const unsigned int needed_pio[3] = { + XFER_PIO_0, XFER_PIO_3, XFER_PIO_4 + }; + int pio = needed_pio[mwdma] - XFER_PIO_0; + + control = 3; /* IORDY|TIME1 */ + + /* If the drive MWDMA is faster than it can do PIO then + we must force PIO into PIO0 */ + + if (adev->pio_mode < needed_pio[mwdma]) + /* Enable DMA timing only */ + control |= 8; /* PIO cycles in PIO0 */ + + if (adev->devno) { /* Slave */ + master_data &= 0xFF4F; /* Mask out IORDY|TIME1|DMAONLY */ + master_data |= control << 4; + pci_read_config_byte(dev, 0x44, &slave_data); + slave_data &= (0x0F + 0xE1 * ap->port_no); + /* Load the matching timing */ + slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) << (ap->port_no ? 4 : 0); + pci_write_config_byte(dev, 0x44, slave_data); + } else { /* Master */ + master_data &= 0xCCF4; /* Mask out IORDY|TIME1|DMAONLY + and master timing bits */ + master_data |= control; + master_data |= + (timings[pio][0] << 12) | + (timings[pio][1] << 8); + } + udma_enable &= ~(1 << devid); + pci_write_config_word(dev, master_port, master_data); + } + pci_write_config_byte(dev, 0x48, udma_enable); +} + +static struct scsi_host_template efar_sht = { + .module = THIS_MODULE, + .name = DRV_NAME, + .ioctl = ata_scsi_ioctl, + .queuecommand = ata_scsi_queuecmd, + .can_queue = ATA_DEF_QUEUE, + .this_id = ATA_SHT_THIS_ID, + .sg_tablesize = LIBATA_MAX_PRD, + .max_sectors = ATA_MAX_SECTORS, + .cmd_per_lun = ATA_SHT_CMD_PER_LUN, + .emulated = ATA_SHT_EMULATED, + .use_clustering = ATA_SHT_USE_CLUSTERING, + .proc_name = DRV_NAME, + .dma_boundary = ATA_DMA_BOUNDARY, + .slave_configure = ata_scsi_slave_config, + .bios_param = ata_std_bios_param, +}; + +static const struct ata_port_operations efar_ops = { + .port_disable = ata_port_disable, + .set_piomode = efar_set_piomode, + .set_dmamode = efar_set_dmamode, + .mode_filter = ata_pci_default_filter, + + .tf_load = ata_tf_load, + .tf_read = ata_tf_read, + .check_status = ata_check_status, + .exec_command = ata_exec_command, + .dev_select = ata_std_dev_select, + + .freeze = ata_bmdma_freeze, + .thaw = ata_bmdma_thaw, + .error_handler = efar_error_handler, + .post_internal_cmd = ata_bmdma_post_internal_cmd, + + .bmdma_setup = ata_bmdma_setup, + .bmdma_start = ata_bmdma_start, + .bmdma_stop = ata_bmdma_stop, + .bmdma_status = ata_bmdma_status, + .qc_prep = ata_qc_prep, + .qc_issue = ata_qc_issue_prot, + .data_xfer = ata_pio_data_xfer, + + .eng_timeout = ata_eng_timeout, + + .irq_handler = ata_interrupt, + .irq_clear = ata_bmdma_irq_clear, + + .port_start = ata_port_start, + .port_stop = ata_port_stop, + .host_stop = ata_host_stop, +}; + + +/** + * efar_init_one - Register EFAR ATA PCI device with kernel services + * @pdev: PCI device to register + * @ent: Entry in efar_pci_tbl matching with @pdev + * + * Called from kernel PCI layer. + * + * LOCKING: + * Inherited from PCI layer (may sleep). + * + * RETURNS: + * Zero on success, or -ERRNO value. + */ + +static int efar_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) +{ + static int printed_version; + static struct ata_port_info info = { + .sht = &efar_sht, + .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma1-2 */ + .udma_mask = 0x0f, /* UDMA 66 */ + .port_ops = &efar_ops, + }; + static struct ata_port_info *port_info[2] = { &info, &info }; + + if (!printed_version++) + dev_printk(KERN_DEBUG, &pdev->dev, + "version " DRV_VERSION "\n"); + + return ata_pci_init_one(pdev, port_info, 2); +} + +static const struct pci_device_id efar_pci_tbl[] = { + { 0x1055, 0x9130, PCI_ANY_ID, PCI_ANY_ID, }, + { } /* terminate list */ +}; + +static struct pci_driver efar_pci_driver = { + .name = DRV_NAME, + .id_table = efar_pci_tbl, + .probe = efar_init_one, + .remove = ata_pci_remove_one, +}; + +static int __init efar_init(void) +{ + return pci_register_driver(&efar_pci_driver); +} + +static void __exit efar_exit(void) +{ + pci_unregister_driver(&efar_pci_driver); +} + + +module_init(efar_init); +module_exit(efar_exit); + +MODULE_AUTHOR("Alan Cox"); +MODULE_DESCRIPTION("SCSI low-level driver for EFAR PIIX clones"); +MODULE_LICENSE("GPL"); +MODULE_DEVICE_TABLE(pci, efar_pci_tbl); +MODULE_VERSION(DRV_VERSION); + -- cgit v1.2.3