aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2013-06-26dlci: validate the net device in dlci_del()Zefan Li
We triggered an oops while running trinity with 3.4 kernel: BUG: unable to handle kernel paging request at 0000000100000d07 IP: [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci] PGD 640c0d067 PUD 0 Oops: 0000 [#1] PREEMPT SMP CPU 3 ... Pid: 7302, comm: trinity-child3 Not tainted 3.4.24.09+ 40 Huawei Technologies Co., Ltd. Tecal RH2285 /BC11BTSA RIP: 0010:[<ffffffffa0109738>] [<ffffffffa0109738>] dlci_ioctl+0xd8/0x2d4 [dlci] ... Call Trace: [<ffffffff8137c5c3>] sock_ioctl+0x153/0x280 [<ffffffff81195494>] do_vfs_ioctl+0xa4/0x5e0 [<ffffffff8118354a>] ? fget_light+0x3ea/0x490 [<ffffffff81195a1f>] sys_ioctl+0x4f/0x80 [<ffffffff81478b69>] system_call_fastpath+0x16/0x1b ... It's because the net device is not a dlci device. Reported-by: Li Jinyue <lijinyue@huawei.com> Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-26dlci: acquire rtnl_lock before calling __dev_get_by_name()Zefan Li
Otherwise the net device returned can be freed at anytime. Signed-off-by: Li Zefan <lizefan@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25net/tg3: Avoid delay during MMIO accessGavin Shan
When the EEH error is the result of a fenced host bridge, MMIO accesses can be very slow (milliseconds) to timeout and return all 1's, thus causing the driver various timeout loops to take way too long and trigger soft-lockup warnings (in addition to taking minutes to recover). It might be worthwhile to check if for any of these cases, ffffffff is a valid possible value, and if not, bail early since that means the HW is either gone or isolated. In the meantime, checking that the PCI channel is offline would be workaround of the problem. Cc: <stable@vger.kernel.org> # v3.0+ Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25macvtap: fix recovery from gup errorsMichael S. Tsirkin
get user pages might fail partially in macvtap zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by: Brad Hubbard <bhubbard@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25tun: fix recovery from gup errorsMichael S. Tsirkin
get user pages might fail partially in tun zero copy mode. To recover we need to put all pages that we got, but code used a wrong index resulting in double-free errors. Reported-by: Brad Hubbard <bhubbard@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-06-24ath9k_htc: Handle IDLE state transition properlySujith Manoharan
Make sure that a chip reset is done when IDLE is turned off - this fixes authentication timeouts. Cc: stable@vger.kernel.org Reported-by: Ignacy Gawedzki <i@lri.fr> Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24ath9k: fix an RCU issue in calling ieee80211_get_tx_ratesFelix Fietkau
ath_txq_schedule is called outside of the drv_tx call, so it needs RCU protection. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-24qlcnic: Do not sleep while holding spinlockShahed Shaikh
This patch reverts commit a4791254b6625b06aa33e36304f6e8a1a4a1fdea ("qlcnic: change mdelay to msleep") which overwrote a commit 68b3f28c11bf896be32ad2a2e151aaa5f4a7c98e ("qlcnic: Fix scheduling while atomic bug") Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24drivers: net: cpsw: fix compilation error with cpsw driverMugunthan V N
drivers/net/ethernet/ti/cpsw.c: In function 'cpsw_suspend': drivers/net/ethernet/ti/cpsw.c:1979:26: error: 'priv' undeclared (first use in this function) drivers/net/ethernet/ti/cpsw.c:1979:26: note: each undeclared identifier is reported only once for each function it appears in make[4]: *** [drivers/net/ethernet/ti/cpsw.o] Error 1 The compilation error was introduced by the following commit 6d3d76f (drivers: net: cpsw: fix cpsw clock gating issue across suspend/resume) Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sh_eth: fix misreporting of transmit abortSergei Shtylyov
Due to obviously missing braces, EESR.TABT (transmit abort) interrupt may be reported even if it hasn't happened, just when EESR.TWB (transmit descriptor write-back) interrupt happens. Luckily (?), EESR.TWB is disabled by the driver via the TRIMD register and all the interrupt masks, so that transmit abort is never actually logged... Put the braces where they should be and fix the incoherent comment, while at it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24sh_eth: fix unhandled RFE interruptSergei Shtylyov
EESR.RFE (receive FIFO overflow) interrupt is enabled by the driver on all SoCs and sh_eth_error() handles it but it's not present in any initializer/assignment of the 'eesr_err_check' field of 'struct sh_eth_cpu_data'. This leads to that interrupt not being handled and cleared, and finally to disabling IRQ and the driver being non-functional. Modify DEFAULT_EESR_ERR_CHECK macro and all explicit initializers of the above mentioned field to contain the EESR.RFE bit. Remove useless backslashes from the initializers, while at it. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24qmi_wwan: add various Novatel Gobi1K IDsDan Williams
Found in the Windows INF files while investigating the Novatel/Verizon USB-1000 device. The USB-1000 is verified as a Gobi1K device and works with QMI after loading appropriate firmware. Signed-off-by: Dan Williams <dcbw@redhat.com> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net: eth: davicnci_cpdma: check dma map errorSebastian Siewior
Since the DMA mapping may fail the caller should check the return value. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24bonding: fix slave speed reporting in bond_miimon_commitNikolay Aleksandrov
When we have BOND_LINK_UP the speed is reported unconditionally with %u format although it can be SPEED_UNKNOWN (-1). After this patch it returns 0 in that case in an attempt to keep the existing scripts happy. One line is intenionally left 81 chars because it gets ugly if broken. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-24net/mlx_en: Timestamping is not supported in slave modeAmir Vadai
Old hypervisors don't mask out timestamp capability for slave. Till slave support will be added, need to disable capability by slave. Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19mv643xx_eth: Allocate receive queue initialized to zeroLubomir Rintel
Zero pointer in rx_skb is how respective rxq_deinit() finds out out that a skb slot is unallocated. If rxq_refill() fails (e.g. on OOM condition), subsequent teardown would result in an attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Lennert Buytenhek <buytenh@wantstofly.org> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19pxa168_eth: Allocate receive queue initialized to zeroLubomir Rintel
Zero pointer in rx_skb or tx_skb is how respective *_deinit() functions find out that a skb slot is unallocated. If *_init() functions unsuccessfully return after the allocation (e.g. when subsequent dma_alloc_coherent() is not successful), this would result in attempt to kfree() invalid pointers. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: Kosta Zertsekel <konszert@marvell.com> Cc: netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19sfc: Remove write permission from phy_type attributeBen Hutchings
Driver probe currently results in: WARNING: at drivers/base/core.c:576 device_create_file+0x57/0x7e() Attribute phy_type: write permission without 'store' Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19netdev: octeon_mgmt: Fix structure layout for little-endian.David Daney
The C ABI reverses the bitfield fill order when compiled as little-endian. Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19netdev: octeon_mgmt: Correct tx IFG workaround.David Daney
The previous fix was still too agressive to meet ieee specs. Increase to (14, 10). Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19stmmac: fix EEE setupGiuseppe CAVALLARO
This patch fixes the EEE setup allowing to configure this support when the link changes. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19drivers: net: cpsw: fix cpsw clock gating issue across suspend/resumeMugunthan V N
Due to some hardware integration issue, CPSW sliver modules requires a reset across suspend/resume cycle for a successful clock gating to CPGMAC (CPSW and Davinci MDIO) in AM335x PG1.0. This issue is fixed in PG2.x, though to support suspend/resume on PG1.0 this reset is required. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19net: fec: Fix build for MCF5272Guenter Roeck
Commits 4c09eed9 (net: fec: Enable imx6 enet checksum acceleration) and baa70a5c (net: fec: enable pause frame to improve rx prefomance for 1G network) introduced functionality into the FEC driver which is not supported on MCF5272. The registers used to implement this functionality do not exist on MCF5272. Since register defines for MCF5272 are separate from register defines for other chips, building images for MCF5272 fails as follows. fec_main.c: In function 'fec_restart': fec_main.c:520:8: error: 'FEC_RACC' undeclared (first use in this function) fec_main.c:585:3: error: 'FEC_R_FIFO_RSEM' undeclared (first use in this function) fec_main.c:586:3: error: 'FEC_R_FIFO_RSFL' undeclared (first use in this function) fec_main.c:587:3: error: 'FEC_R_FIFO_RAEM' undeclared (first use in this function) fec_main.c:588:3: error: 'FEC_R_FIFO_RAFL' undeclared (first use in this function) fec_main.c:591:3: error: 'FEC_OPD' undeclared (first use in this function) Adding the missing register defines is not an option, since the registers do not exist on MCF5272. Disable the added functionality for MCF5272 builds. Cc: Frank Li <Frank.Li@freescale.com> Cc: Jim Baxter <jim_baxter@mentor.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19vxlan: fix check for migration of static entrystephen hemminger
The check introduced by: commit 26a41ae604381c5cc0caf1c3261ca6b298b5fe69 Author: stephen hemminger <stephen@networkplumber.org> Date: Mon Jun 17 12:09:58 2013 -0700 vxlan: only migrate dynamic FDB entries was not correct because it is checking flag about type of FDB entry, rather than the state (dynamic versus static). The confusion arises because vxlan is reusing values from bridge, and bridge is reusing values from neighbour table, and easy to get lost in translation. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-19can: usb_8dev: unregister netdev before free()ingMarc Kleine-Budde
The usb_8dev hardware has problems on some xhci USB hosts. The driver fails to read the firmware revision in the probe function. This leads to the following Oops: [ 3356.635912] kernel BUG at net/core/dev.c:5701! The driver tries to free the netdev, which has already been registered, without unregistering it. This patch fixes the problem by unregistering the netdev in the error path. Reported-by: Michael Olbrich <m.olbrich@pengutronix.de> Reviewed-by: Bernd Krumboeck <krumboeck@universalnet.at> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2013-06-17net: cpsw: check for cpts pointer after its allocationSebastian Siewior
after priv->cpts got allocated then this pointer should check to determine if the allocation succeeded or not. Cc: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into wireless John W. Linville says: ==================== This will probably be the last batch of wireless fixes intended for 3.10. Many of these are one- or two-liners, and a couple of others are mostly relocating existing code to avoid races or to limit the code to effecting specific hardware, etc. The mac80211 fixes have a couple of exceptions to the above. Regarding those, Johannes says: "Following davem's complaint about my patch, here's a new pull request w/o the patch he was complaining about, but instead with the const fix rolled into the fix. I have a fix for radar detection, one for rate control and a workaround for broken HT APs which is a regression fix because we didn't rely on them to be correct before." Johannes also sends some iwlwifi fixes: "I picked up Nikolay's patch for the chain noise calibration bug that seems to have been there forever, a fix from Emmanuel for setting TX flags on BAR frames and a fix of my own to avoid printing request_module() errors if the kernel isn't even modular. We also have our own version of Stanislaw's fix for rate control." Along with those... Anderson Lizardo fixes a Bluetooth memory corruption bug when an MTU value is set to too small of a value. Arend van Spriel sends a revised brcmsmac bug that fixes a regression caused by a bad return value in an earlier patch. He also sends a brcmfmac fix to avoid an oops when loading the driver at boot. Daniel Drake fixes a race condition in btmrvl that causes hangs on suspend for OLPC hardware. Johan Hedberg adds a check to avoid sending a HCI_Delete_Stored_Link_Key command to devices that don't support them, avoiding some scary looking log spam. Stanislaw Gruszka gives us a fix for iwlegacy to be able to use rates higher than 1Mb/s on older wireless networks. He also sends an rt2x00 fix to reinstate older tx power handling behavior for some devices that didn't work well with the current code. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17alx: add a simple AR816x/AR817x device driverJohannes Berg
This is a very simple driver, based on the original vendor driver that Qualcomm/Atheros published/submitted previously, but reworked to make the code saner. However, it also lost a number of features (TSO/GSO, VLAN acceleration and multi- queue support) in the process, as well as debugging support features I didn't have any use for. The only thing I left is checksum offload. More features can obviously be added, but this seemed like a good start for having a driver in mainline at all. Johannes Stezenbach has verified that the driver works on AR8161, I have a AR8171 myself. The E2200 device ID I found on github in somebody's repository. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Fix the VLAN_TAG_PRESENT in netvsc_recv_callback()Haiyang Zhang
We should call __vlan_hwaccel_put_tag() only if the packet comes from vlan, otherwise VLAN_TAG_PRESENT will always be added. Reported-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: handle skb_clone failurestephen hemminger
If skb_clone fails if out of memory then just skip the fanout. Problem was introduced in 3.10 with: commit 6681712d67eef14c4ce793561c3231659153a320 Author: David Stevens <dlstevens@us.ibm.com> Date: Fri Mar 15 04:35:51 2013 +0000 vxlan: generalize forwarding tables Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: only migrate dynamic FDB entriesstephen hemminger
Only migrate dynamic forwarding table entries, don't modify static entries. If packet received from incorrect source IP address assume it is an imposter and drop it. This patch applies only to -net, a different patch would be needed for earlier kernels since the NTF_SELF flag was introduced with 3.10. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17vxlan: fix race between flush and incoming learningstephen hemminger
It is possible for a packet to arrive during vxlan_stop(), and have a dynamic entry created. Close this by checking if device is up. CPU1 CPU2 vxlan_stop vxlan_flush hash_lock acquired vxlan_encap_recv vxlan_snoop waiting for hash_lock hash_lock relased vxlan_flush done hash_lock acquired vxlan_fdb_create This is a day-one bug in vxlan goes back to 3.7. Signed-off-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2013-06-16lseek(fd, n, SEEK_END) does *not* go to eof - nAl Viro
When you copy some code, you are supposed to read it. If nothing else, there's a chance to spot and fix an obvious bug instead of sharing it... X-Song: "I Got It From Agnes", by Tom Lehrer Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> [ Tom Lehrer? You're dating yourself, Al ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-06-13tulip: Properly check dma mapping resultNeil Horman
Tulip throws an error when dma debugging is enabled, as it doesn't properly check dma mapping results with dma_mapping_error() durring tx ring refills. Easy fix, just add it in, and drop the frame if the mapping is bad Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Grant Grundler <grundler@parisc-linux.org> CC: "David S. Miller" <davem@davemloft.net> Reviewed-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13brcmfmac: free primary net_device when brcmf_bus_start() failsArend van Spriel
When initialization within brcmf_bus_start() fails on steps before the brcmf_net_attach() the net_device for the primary interface needs to be freed. This patch resolves a panic during kernel boot as reported by Stephen Warren. ref.: http://mid.gmane.org/51AD1F22.2080004@wwwdotorg.org Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-13net: sh_eth: fix incorrect RX length error if R8A7740Yoshihiro Shimoda
This patch fixes an issue that the driver increments the "RX length error" on every buffer in sh_eth_rx() if the R8A7740. This patch also adds a description about the Receive Frame Status bits. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13drivers: net: davinci_mdio: restore mdio clk divider in mdio resumeMugunthan V N
During suspend resume cycle all the register data is lost, so MDIO clock divier value gets reset. This patch restores the clock divider value. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13drivers: net: davinci_mdio: moving mdio resume earlier than cpsw ethernet driverMugunthan V N
MDIO driver should resume before CPSW ethernet driver so that CPSW connect to the phy and start tx/rx ethernet packets, changing the suspend/resume apis with suspend_late/resume_early. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13tg3: Wait for boot code to finish after power onNithin Sujir
Some systems that don't need wake-on-lan may choose to power down the chip on system standby. Upon resume, the power on causes the boot code to startup and initialize the hardware. On one new platform, this is causing the device to go into a bad state due to a race between the driver and boot code, once every several hundred resumes. The same race exists on open since we come up from a power on. This patch adds a wait for boot code signature at the beginning of tg3_init_hw() which is common to both cases. If there has not been a power-off or the boot code has already completed, the signature will be present and poll_fw() returns immediately. Also return immediately if the device does not have firmware. Cc: stable@vger.kernel.org Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13bonding: fix igmp_retrans type and two related racesNikolay Aleksandrov
First the type of igmp_retrans (which is the actual counter of igmp_resend parameter) is changed to u8 to be able to store values up to 255 (as per documentation). There are two races that were hidden there and which are easy to trigger after the previous fix, the first is between bond_resend_igmp_join_requests and bond_change_active_slave where igmp_retrans is set and can be altered by the periodic. The second race condition is between multiple running instances of the periodic (upon execution it can be scheduled again for immediate execution which can cause the counter to go < 0 which in the unsigned case leads to unnecessary igmp retransmissions). Since in bond_change_active_slave bond->lock is held for reading and curr_slave_lock for writing, we use curr_slave_lock for mutual exclusion. We can't drop them as there're cases where RTNL is not held when bond_change_active_slave is called. RCU is unlocked in bond_resend_igmp_join_requests before getting curr_slave_lock since we don't need it there and it's pointless to delay. The decrement is moved inside the "if" block because if we decrement unconditionally there's still a possibility for a race condition although it is much more difficult to hit (many changes have to happen in a very short period in order to trigger) which in the case of 3 parallel running instances of this function and igmp_retrans == 1 (with check bond->igmp_retrans-- > 1) is: f1 passes, doesn't re-schedule, but decrements - igmp_retrans = 0 f2 then passes, doesn't re-schedule, but decrements - igmp_retrans = 255 f3 does the unnecessary retransmissions. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13bonding: reset master mac on first enslave failureNikolay Aleksandrov
If the bond device is supposed to get the first slave's MAC address and the first enslavement fails then we need to reset the master's MAC otherwise it will stay the same as the failed slave device. We do it after err_undo_flags since that is the first place where the MAC can be changed and we check if it should've been the first slave and if the bond's MAC was set to it because that err place is used by multiple locations prior to changing the master's MAC address. Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13net: ethernet: stmicro: stmmac: Fix compile error when STMMAC_XMIT_DEBUG usedDinh Nguyen
drivers/net/ethernet/stmicro/stmmac/stmmac_main.c: In function: stmmac_xmit drivers/net/ethernet/stmicro/stmmac/stmmac_main.c:1902:74: error: expected ) before __func__ Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13be2net: Fix 32-bit DMA Mask handlingSomnath Kotur
Fix to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Signed-off-by: Somnath Kotur <somnath.kotur@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13xen-netback: don't de-reference vif pointer after having called xenvif_put()Jan Beulich
When putting vif-s on the rx notify list, calling xenvif_put() must be deferred until after the removal from the list and the issuing of the notification, as both operations dereference the pointer. Changing this got me to notice that the "irq" variable was effectively unused (and was of too narrow type anyway). Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-13macvlan: don't touch promisc without passthroughMichael S. Tsirkin
commit df8ef8f3aaa6692970a436204c4429210addb23a "macvlan: add FDB bridge ops and macvlan flags" added a way to control NOPROMISC macvlan flag through netlink. However, with a non passthrough device we never set promisc on open, even if NOPROMISC is off. As a result: If userspace clears NOPROMISC on open, then does not clear it on a netlink command, promisc counter is not decremented on stop and there will be no way to clear it once macvlan is detached. If userspace does not clear NOPROMISC on open, then sets NOPROMISC on a netlink command, promisc counter will be decremented from 0 and overflow to fffffffff with no way to clear promisc. To fix, simply ignore NOPROMISC flag in a netlink command for non-passthrough devices, same as we do at open/close. Since we touch this code anyway - check dev_set_promiscuity return code and pass it to users (though an error here is unlikely). Cc: "David S. Miller" <davem@davemloft.net> Reviewed-by: John Fastabend <john.r.fastabend@intel.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-12Merge branch 'for-john' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
2013-06-12rt2800: fix RT5390 & RT3290 TX power settings regressionStanislaw Gruszka
My change: commit cee2c7315f60beeff6137ee59e99acc77d636eeb Author: Stanislaw Gruszka <sgruszka@redhat.com> Date: Fri Oct 5 13:44:09 2012 +0200 rt2800: use BBP_R1 for setting tx power unfortunately does not work well with RT5390 and RT3290 chips as they require different temperature compensation TX power settings (TSSI tuning). Since that commit make wireless connection very unstable on those chips, restore previous behavior to fix regression. Once we implement proper TSSI tuning on 5390/3290 we can restore back setting TX power by BBP_R1 register for those chips. Reported-and-tested-by: Mike Romberg <mike-romberg@comcast.net> Cc: stable@vger.kernel.org Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-06-12brcmsmac: disable power-save related functionsArend van Spriel
This patch fixes a regression introduced by: commit 6da3b6c48d79da96a36c2632053cf4f53bf48fb2 Author: Hauke Mehrtens <hauke@hauke-m.de> Date: Sun Mar 24 01:45:52 2013 +0100 brcmsmac: remove brcms_bss_cfg->associated The regression behaviour was described on mailing list. http://mid.gmane.org/5197DC4F.7030503@broadcom.com: "On laptop I installed kernel with brcmsmac compiled as module. It comes up and associates during boot, but after logging in there is no connectivity. Triggering reassoc gives connectivity for some time, but after a while (1-2 min) it stops." Before the mentioned commit the return value of the function brcms_c_ps_allowed() was always false, which is desired behaviour as power-save is not supported at the moment. Therefor, the function is changed to just return false instead of simply reverting the mentioned commit. Bug: 58471 <https://bugzilla.kernel.org/show_bug.cgi?id=58471> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-19 06:02:30 +0000