aboutsummaryrefslogtreecommitdiff
path: root/drivers/edac/amd64_edac.c
AgeCommit message (Collapse)Author
2009-09-16amd64_edac: check NB MCE bank enable on the current node properlyBorislav Petkov
The old code was using smp_call_function_many which skips the current cpu if it is in the supplied cpumask. Switch to the rdmsr_on_cpus() interface which takes care of that. In addition, add get_cpus_on_this_dct_cpumask helper which computes a cpumask of all the cores on a node and thus on a DCT. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16amd64_edac: Rewrite unganged mode code of f10_early_channel_countWan Wei
Simplify the procedure by checking if there is any DIMM in each channel. This patch will fix the bugs such as when there is no DIMMs under certain node, two DIMMs in the same channel, and only one DIMM in each channel of the node. Borislav: minor fixups Signed-off-by: Wan Wei <wanwei@mail.dawning.com.cn> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-16amd64_edac: cleanup amd64_check_ecc_enabledBorislav Petkov
Simplify code flow and make sure return value is always valid since further driver init depends on it. Carve out long warning string and make code more readable. Shorten some names, while at it. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: carve out decoding of MCi_STATUS ErrorCodeBorislav Petkov
This is the MCE error code from the MCi_STATUS banks, bits [15:0] which describe what type of error was encountered: GART TLB, Memory or Bus error. The semantics of those bits are identical across all MCE banks so decode those separately, irrespectively of MCE type. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC, AMD: carve out MCi_STATUS decodingBorislav Petkov
The MCi_STATUS registers have most field definitions in common so decode them in the general path. Do not pass ecc_type along and compute it in __amd64_decode_bus_error instead. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14x86, mce: pass mce info to EDAC for decodingBorislav Petkov
Move NB decoder along with required defines to EDAC MCE core. Add registration routines for further decoding of the MCE info in the AMD64 EDAC module. CC: Andi Kleen <andi@firstfloor.org> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup amd64_decode_bus_errorBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: remove memory and GART TLB error decodersBorislav Petkov
Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup/complete NB MCE decodingBorislav Petkov
* don't dump info which mcheck already does * update to newest BKDG * mv amd64_process_error_info -> amd64_decode_nb_mce * shorten error struct names * remove redundant info ptr in amd64_process_error_info * remove unused ErrorCodeExt[19:16] (MCx_STATUS) defines Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14amd64_edac: cleanup amd64_process_error_infoBorislav Petkov
* mv amd64_error_info_regs -> err_regs * remove redundant info ptr Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-09-14EDAC: move MCE error descriptions to EDAC coreBorislav Petkov
This is in preparation of adding AMD-specific MCE decoding functionality to the EDAC core. The error decoding macros originate from the AMD64 EDAC driver albeit in a simplified and cleaned up version here. While at it, add macros to generate the error description strings and use them in the error type decoders directly which removes a bunch of code and makes the decoding functions much more readable. Also, fix strings and shorten macro names. Remove superfluous htlink_msgs. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-08-04amd64_edac: print debug statements only on errorDoug Thompson
Add forgotten return calls for the successful cases. Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-08-03amd64_edac: fix ECC checkingDoug Thompson
On the good path of BIOS enabled ECC and no override, the value returned is 1 by omission and thus is deemed failing by the probe-function. Allow proper module initialization by clearing the retval explicitly. Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-07-27amd64_edac: read the right F2 maskoffset regWan Wei
Signed-off-by: Wan Wei <onewayforever@gmail.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26amd64_edac: misc small cleanupsBorislav Petkov
- cleanup debug calls - shorten function names - cleanup error exit paths Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26amd64_edac: fix ecc_enable_override handlingBorislav Petkov
amd64_check_ecc_enabled() returns non-zero status when ECC checking/correcting is disabled and this fails further loading of the driver even when 'ecc_enable_override' boot param is used. Fix that by clearing return status in that case. Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-26amd64_edac: check only ECC bit in amd64_determine_edac_capBorislav Petkov
Checking whether the machine is using ECC enabled DRAM is done through testing the DimmEccEn bit in the DRAM Cfg Low register (F2x[1,0]90). Do that instead of testing all bits from the DimmEccEn upwards. Also, remove mci->edac_cap assignment and use value returned from amd64_determine_edac_cap(). Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add module registration routinesDoug Thompson
Also, link into Kbuild by adding Kconfig and Makefile entries. Borislav: - Kconfig/Makefile splitting - use zero-sized arrays for the sysfs attrs if not enabled - rename sysfs attrs to more conform values - shorten CONFIG_ names - make multiple structure members assignment vertically aligned - fix/cleanup comments - fix function return value patterns - fix err labels - fix a memleak bug caught by Ingo - remove the NUMA dependency and use num_k8_northbrides for initializing a driver instance per NB. - do not copy the pvt contents into the mci struct in amd64_init_2nd_stage() and save it in the mci->pvt_info void ptr instead. - cleanup debug calls - simplify amd64_setup_pci_device() Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add ECC reporting initializersDoug Thompson
Borislav: - convert to the new {rd|wr}msr_on_cpus interfaces. - convert pvt->old_mcgctl to a bitmask thus saving some bytes - fix/cleanup comments - fix function return value patterns - add a proper bugfix found by Doug to amd64_check_ecc_enabled where we missed checking for the ECC enabled bit in NB CFG. - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add EDAC core-related initializersDoug Thompson
Borislav: - add a amd64_free_mc_sibling_devices() helper instead of opencoding the release-path. - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add error decoding logicDoug Thompson
Borislav: - fold amd64_error_info_valid() into its only user - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add ECC chipkill syndrome mapping tableDoug Thompson
Borislav: - fix comments - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add per-family descriptorsDoug Thompson
Borislav: - fix comments - fix function return value patterns Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add F10h-and-later methods-p3Doug Thompson
Borislav: - compute dct_sel_base_off in f10_match_to_this_node() correctly since it cannot be assumed that the Reserved bits are zero and they have to be masked out instead. - cleanup, remove StinkyIdentifiers, simplify logic - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add F10h-and-later methods-p2Doug Thompson
Borislav: - fix a wrong negation in f10_determine_base_addr_offset() - fix a wrong mask in f10_determine_base_addr_offset() which should select DctSelBaseAddr[31:11] and not [31:16] as it was before - remove StinkyIdentifiers, trivially simplify code. - fix/cleanup comments - fix function return value patterns Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add F10h-and-later methods-p1Doug Thompson
Borislav: Fail f10_early_channel_count() if error encountered while reading a NB register since those cached register contents are accessed afterwards. - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add k8-specific methodsDoug Thompson
Borislav: - fix/cleanup/move comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: assign DRAM chip select base and mask in a family-specific wayDoug Thompson
Borislav: - cleanup/fix comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add helper to dump relevant registersDoug Thompson
Borislav: - cleanup/fix comments - fix function return value patterns - cleanup dbg calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add DRAM address type conversion facilitiesDoug Thompson
Borislav: - cleanup/fix comments, add BKDG refs - fix function return value patterns - cleanup dbg calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add functionality to compute the DRAM holeDoug Thompson
Borislav: - cleanup/fix comments, add BKDG refs - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add sys addr to memory controller mapping helpersDoug Thompson
Borislav: - cleanup comments - cleanup debug calls - simplify find_mc_by_sys_addr's exit path Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
2009-06-10amd64_edac: add memory scrubber interfaceDoug Thompson
Borislav: - fix/cleanup comments - fix function return value patterns - cleanup debug calls Reviewed-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Doug Thompson <dougthompson@xmission.com> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-15 18:09:28 +0000