aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/pseries/hotplug-cpu.c
AgeCommit message (Collapse)Author
2013-01-10powerpc: Fix a lazy irq related WARING in arch_local_irq_restore()Li Zhong
The pseries CPU hotplug code uses cede_processor without properly synchronizing the SW and HW interrupt enable state. This fixes it using the same helpers that were written for the idle code. Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com> ======================= Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-11-15powerpc+of: Add of node/property notification chain for adds and removesNathan Fontenot
This patch moves the notification chain for updates to the device tree from the powerpc/pseries code to the base OF code. This makes this functionality available to all architectures. Additionally the notification chain is updated to allow notifications for property add/remove/update. To make this work a pointer to a new struct (of_prop_reconfig) is passed to the routines in the notification chain. The of_prop_reconfig property contains a pointer to the node containing the property and a pointer to the property itself. In the case of property updates, the property pointer refers to the new property. Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com> Acked-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-28Disintegrate asm/system.h for PowerPCDavid Howells
Disintegrate asm/system.h for PowerPC. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> cc: linuxppc-dev@lists.ozlabs.org
2011-10-31powerpc: Fix up implicit sched.h usersPaul Gortmaker
They are getting it through device.h --> module.h path, but we want to clean that up. This is a sample of what will happen if we don't: pseries/iommu.c: In function 'tce_build_pSeriesLP': pseries/iommu.c:136: error: implicit declaration of function 'show_stack' pseries/eeh.c: In function 'eeh_token_to_phys': pseries/eeh.c:359: error: 'init_mm' undeclared (first use in this function) pseries/eeh_event.c: In function 'eeh_event_handler': pseries/eeh_event.c:63: error: implicit declaration of function 'daemonize' pseries/eeh_event.c:64: error: implicit declaration of function 'set_current_state' pseries/eeh_event.c:64: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) pseries/eeh_event.c:64: error: (Each undeclared identifier is reported only once pseries/eeh_event.c:64: error: for each function it appears in.) pseries/eeh_event.c: In function 'eeh_thread_launcher': pseries/eeh_event.c:109: error: 'CLONE_KERNEL' undeclared (first use in this function) hotplug-cpu.c: In function 'pseries_mach_cpu_die': hotplug-cpu.c:115: error: implicit declaration of function 'idle_task_exit' kernel/swsusp_64.c: In function 'do_after_copyback': kernel/swsusp_64.c:17: error: implicit declaration of function 'touch_softlockup_watchdog' cell/spufs/context.c: In function 'alloc_spu_context': cell/spufs/context.c:60: error: implicit declaration of function 'get_task_mm' cell/spufs/context.c:60: warning: assignment makes pointer from integer without a cast cell/spufs/context.c: In function 'spu_forget': cell/spufs/context.c:127: error: implicit declaration of function 'mmput' pasemi/dma_lib.c: In function 'pasemi_dma_stop_chan': pasemi/dma_lib.c:332: error: implicit declaration of function 'cond_resched' sysdev/fsl_lbc.c: In function 'fsl_lbc_ctrl_irq': sysdev/fsl_lbc.c:247: error: 'TASK_NORMAL' undeclared (first use in this function) Add in sched.h so these get the definitions they are looking for. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-05powerpc/pseries: Simplify vpa deregistration functionsAnton Blanchard
The VPA, SLB shadow and DTL degistration functions do not need an address, so simplify things and remove it. Also cleanup pseries_kexec_cpu_down a bit by storing the cpu IDs in local variables. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: Improve error code on reconfiguration notifier failureAkinobu Mita
Reconfiguration notifier call for device node may fail by several reasons, but it always assumes kmalloc failures. This enables reconfiguration notifier call chain to get the actual error code rather than -ENOMEM by converting all reconfiguration notifier calls to return encapsulate error code with notifier_from_errno(). Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-04powerpc: Convert old cpumask API into new oneKOSAKI Motohiro
Adapt new API. Almost change is trivial. Most important change is the below line because we plan to change task->cpus_allowed implementation. - ctx->cpus_allowed = current->cpus_allowed; Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-04-20powerpc/xics: Rewrite XICS driverBenjamin Herrenschmidt
This is a significant rework of the XICS driver, too significant to conveniently break it up into a series of smaller patches to be honest. The driver is moved to a more generic location to allow new platforms to use it, and is broken up into separate ICP and ICS "backends". For now we have the native and "hypervisor" ICP backends and one common RTAS ICS backend. The driver supports one ICP backend instanciation, and many ICS ones, in order to accomodate future platforms with multiple possibly different interrupt "sources" mechanisms. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2010-07-31powerpc/pseries: Increase cpu die timeoutBenjamin Herrenschmidt
In testing SMT disable, we have been regularly seeing the following message: Querying DEAD? cpu %i (%i) shows %i This indicates the current delay in pseries_cpu_die where we wait for the specified CPU to die, is insufficient. Usually, this does not cause a problem, but we've seen this result in BUG_ON's going off in the timer code when we try to migrate the timers off the dead cpu while a timer is still running. Increasing this delay, as is done in this patch, seems to resolve this issue. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-07-09powerpc/pseries: Partition hibernation supportBrian King
Enables support for HMC initiated partition hibernation. This is a firmware assisted hibernation, since the firmware handles writing the memory out to disk, along with other partition information, so we just mimic suspend to ram. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Update some commentsAnton Blanchard
Since the *_map cpumask variants are deprecated, change the comments to instead refer to *_mask. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Convert hotplug-cpu code to new cpumask APIAnton Blanchard
Convert hotplug-cpu code to new cpumask API. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/pseries: Make query_cpu_stopped callable outside hotplug cpuMichael Neuling
This moves query_cpu_stopped() out of the hotplug cpu code and into smp.c so it can called in other places and renames it to smp_query_cpu_stopped(). It also cleans up the return values by adding some #defines Cc: <stable@kernel.org> Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09powerpc: Reduce printk from pseries_mach_cpu_die()Vaidyanathan Srinivasan
Remove debug printks in pseries_mach_cpu_die(). These are noisy at runtime. Traceevents can be added to instrument this section of code. The following KERN_INFO printks are removed: cpu 62 (hwid 62) returned from cede. Decrementer value = b2802fff Timebase value = 2fa8f95035f4a cpu 62 (hwid 62) got prodded to go online cpu 58 (hwid 58) ceding for offline with hint 2 Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09powerpc: Move checks in pseries_mach_cpu_die()Vaidyanathan Srinivasan
Rearrange condition checks for better code readability and prevention of possible race conditions when preferred_offline_state can potentially change during the execution of pseries_mach_cpu_die(). The patch will make pseries_mach_cpu_die() put cpu in one of the consistent states and not hit the run over BUG() Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-03-09powerpc: Reset kernel stack on cpu online from cede stateVaidyanathan Srinivasan
Cpu hotplug (offline) without dlpar operation will place cpu in cede state and the extended_cede_processor() function will return when resumed. Kernel stack pointer needs to be reset before start_secondary() is called to continue the online operation. Added new function start_secondary_resume() to do the above steps. Signed-off-by: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09powerpc/pseries: Quieten cede latency printkAnton Blanchard
The cede latency stuff is relatively new and we don't need to complain about it not working on older firmware. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-02-09arch/powerpc: Fix continuation line formatsJoe Perches
String constants that are continued on subsequent lines with \ are not good. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-11-24powerpc/pseries: Add hooks to put the CPU into an appropriate offline stateGautham R Shenoy
When a CPU is offlined on POWER currently, we call rtas_stop_self() and hand the CPU back to the resource pool. This path is used for DLPAR which will cause a change in the LPAR configuration which will be visible outside. This patch changes the default state a CPU is put into when it is offlined. On platforms which support ceding the processor to the hypervisor with latency hint specifier value, during a cpu offline operation, instead of calling rtas_stop_self(), we cede the vCPU to the hypervisor while passing a latency hint specifier value. The Hypervisor can use this hint to provide better energy savings. Also, during the offline operation, the control of the vCPU remains with the LPAR as oppposed to returning it to the resource pool. The patch achieves this by creating an infrastructure to set the preferred_offline_state() which can be either - CPU_STATE_OFFLINE: which is the current behaviour of calling rtas_stop_self() - CPU_STATE_INACTIVE: which cedes the vCPU to the hypervisor with the latency hint specifier. The codepath which wants to perform a DLPAR operation can set the preferred_offline_state() of a CPU to CPU_STATE_OFFLINE before invoking cpu_down(). The patch also provides a boot-time command line argument to disable/enable CPU_STATE_INACTIVE. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-09-24cpumask: Use accessors for cpu_*_mask: powerpcRusty Russell
Use the accessors rather than frobbing bits directly (the new versions are const). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Mike Travis <travis@sgi.com>
2008-12-23powerpc/pseries: Fix cpu hotplugSebastien Dugue
Currently, pseries_cpu_die() calls msleep() while polling RTAS for the status of the dying cpu. However, if the cpu that is going down also happens to be the one doing the tick then we're hosed as the tick_do_timer_cpu 'baton' is only passed later on in tick_shutdown() when _cpu_down() does the CPU_DEAD notification. Therefore jiffies won't be updated anymore. This replaces that msleep() with a cpu_relax() to make sure we're not going to schedule at that point. With this patch my test box survives a 100k iterations hotplug stress test on _all_ cpus, whereas without it, it quickly dies after ~50 iterations. Signed-off-by: Sebastien Dugue <sebastien.dugue@bull.net> Cc: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-02-07[POWERPC] Split xics_teardown_cpu()Nathan Fontenot
This splits off the kexec path bits of the xics_teardown_cpu() routine into its own xics_kexec_teardown_cpu() routine. With the previous combined routine the CPPR for a cpu that is being removed may have its CPPR reset in the plpar_eoi() call (which explicitly sets the CPPR to a non-zero value). Splitting of the kexec bits of the code prevents this from happening in the cpu remove path. Once again, this does not cause the cpu remove from the kernel to fail, but it does cause cpu dlpar operations to not be able to return the cpu to the hypervisor. Signed-off-by: Nathan Fontenot <nfont@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-01-25cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()Gautham R Shenoy
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-11[POWERPC] Fix CPU hotplug when using the SLB shadow bufferMichael Neuling
Before we register the SLB shadow buffer, we need to invalidate the entries in the buffer, otherwise we can end up stale entries from when we previously offlined the CPU. This does this invalidate as well as unregistering the buffer with PHYP before we offline the cpu. Tested and fixes crashes seen on 970MP (thanks to tonyb) and POWER5. Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-11[POWERPC] Don't enable cpu hotplug on pSeries machines with MPICOlof Johansson
Don't allow cpu hotplug on systems lacking XICS interrupt controller (i.e. with an MPIC interrupt controller), since the current pSeries platform code is hardcoded for XICS. This works around the bug reported by Paul Mackerras where the disable_nonboot_cpus() call recently added to the shutdown path will cause an oops on older pSeries machines. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] Rename get_property to of_get_property: arch/powerpcStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Cleanup pass over platforms/pseries/hotplug-cpu.cMichael Ellerman
Purely cosmetic. Change pSeries to pseries inline with other parts of the kernel, and fix an overly long line. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Only enable cpu hotplug via RTAS if the required firmware support ↵Michael Ellerman
is found To support cpu hotplug on pseries we require two RTAS tokens. The cpu hotplug machinery should only be wired up if these tokens are found in the device tree. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Move the rest of the hotplug cpu code into ↵Michael Ellerman
platforms/pseries/hotplug-cpu.c Move the rest of the hotplug cpu code from platforms/pseries/smp.c into platforms/pseries/hotplug-cpu.c. Wire up the smp_ops callbacks and the notifier in the hotplug cpu initcall, rather than in smp_init_pseries(). No change in behaviour. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.cMichael Ellerman
Move pSeries_mach_cpu_die() into platforms/pseries/hotplug-cpu.c, this allows rtas_stop_self() to be static so remove the prototype. Wire up pSeries_mach_cpu_die() in the initcall, rather than statically in setup.c, the initcall will still run prior to the cpu hotplug code being callable, so there should be no change in behaviour. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08[POWERPC] Move rtas_stop_self() into platforms/pseries/hotplug-cpu.cMichael Ellerman
As the first step in consolidating the pseries hotplug cpu code, create platforms/pseries/hotplug-cpu.c and move rtas_stop_self() into it. Do the rtas token initialisation in a new initcall, rather than rtas_initialize(). Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>