path: root/arch/powerpc/oprofile/common.c
AgeCommit message (Collapse)Author
2010-07-14powerpc/oprofile: Don't build server oprofile drivers on 64-bit BookEBenjamin Herrenschmidt
They will fail to build due to the lack of mtmsrd, and wouldn't be useful anyways Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-01-08powerpc/oprofile: IBM CELL: add SPU event profiling supportCarl Love
This patch adds the SPU event based profiling funcitonality for the IBM Cell processor. Previously, the CELL OProfile kernel code supported PPU event, PPU cycle profiling and SPU cycle profiling. The addition of SPU event profiling allows the users to identify where in their SPU code various SPU evnets are occuring. This should help users further identify issues with their code. Note, SPU profiling has some limitations due to HW constraints. Only one event at a time can be used for profiling and SPU event profiling must be time sliced across all of the SPUs in a node. The patch adds a new arch specific file to the OProfile file system. The file has bit 0 set to indicate that the kernel supports SPU event profiling. The user tool must check this file/bit to make sure the kernel supports SPU event profiling before trying to do SPU event profiling. The user tool check is part of the user tool patch for SPU event profiling. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
2008-06-26on_each_cpu(): kill unused 'retry' parameterJens Axboe
It's not even passed on to smp_call_function() anymore, since that was removed. So kill it. Acked-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-02-05[POWERPC] Made FSL Book-E PMC support more genericAndy Fleming
Some of the more recent e300 cores have the same performance monitor implementation as the e500. e300 isn't book-e, so the name isn't really appropriate. In preparation for e300 support, rename a bunch of fsl_booke things to say fsl_emb (Freescale Embedded Performance Monitors). Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-07-20[CELL] oprofile: add support to OProfile for profiling CELL BE SPUsBob Nelson
From: Maynard Johnson <mpjohn@us.ibm.com> This patch updates the existing arch/powerpc/oprofile/op_model_cell.c to add in the SPU profiling capabilities. In addition, a 'cell' subdirectory was added to arch/powerpc/oprofile to hold Cell-specific SPU profiling code. Exports spu_set_profile_private_kref and spu_get_profile_private_kref which are used by OProfile to store private profile information in spufs data structures. Also incorporated several fixes from other patches (rrn). Check pointer returned from kzalloc. Eliminated unnecessary cast. Better error handling and cleanup in the related area. 64-bit unsigned long parameter was being demoted to 32-bit unsigned int and eventually promoted back to unsigned long. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Bob Nelson <rrnelson@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org>
2007-04-24[POWERPC] pasemi: PA6T oprofile supportOlof Johansson
Oprofile support for PA6T, kernel side. Also rename the PA6T_SPRN.* defines to SPRN_PA6T.*. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-24[POWERPC] Fix oprofile support on Cell LPARIshizaki Kou
Op_model_cell supports native Cell. By returning -EINVAL, oprofile uses timer interrupt on Cell LPAR. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] ps3: multiplatform build fixesArnd Bergmann
A few code paths need to check whether or not they are running on the PS3's LV1 hypervisor before making hcalls. This introduces a new firmware feature bit for this, FW_FEATURE_PS3_LV1. Now when both PS3 and IBM_CELL_BLADE are enabled, but not PSERIES, FW_FEATURE_PS3_LV1 and FW_FEATURE_LPAR get enabled at compile time, which is a bug. The same problem can also happen for (PPC_ISERIES && !PPC_PSERIES && PPC_SOMETHING_ELSE). In order to solve this, I introduce a new CONFIG_PPC_NATIVE option that is set when at least one platform is selected that can run without a hypervisor and then turns the firmware feature check into a run-time option. The new cell oprofile support that was recently merged does not work on hypervisor based platforms like the PS3, therefore make it depend on PPC_CELL_NATIVE instead of PPC_CELL. This may change if we get oprofile support for PS3. Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com>
2006-12-04[POWERPC] cell: Add oprofile supportMaynard Johnson
Add PPU event-based and cycle-based profiling support to Oprofile for Cell. Oprofile is expected to collect data on all CPUs simultaneously. However, there is one set of performance counters per node. There are two hardware threads or virtual CPUs on each node. Hence, OProfile must multiplex in time the performance counter collection on the two virtual CPUs. The multiplexing of the performance counters is done by a virtual counter routine. Initially, the counters are configured to collect data on the even CPUs in the system, one CPU per node. In order to capture the PC for the virtual CPU when the performance counter interrupt occurs (the specified number of events between samples has occurred), the even processors are configured to handle the performance counter interrupts for their node. The virtual counter routine is called via a kernel timer after the virtual sample time. The routine stops the counters, saves the current counts, loads the last counts for the other virtual CPU on the node, sets interrupts to be handled by the other virtual CPU and restarts the counters, the virtual timer routine is scheduled to run again. The virtual sample time is kept relatively small to make sure sampling occurs on both CPUs on the node with a relatively small granularity. Whenever the counters overflow, the performance counter interrupt is called to collect the PC for the CPU where data is being collected. The oprofile driver relies on a firmware RTAS call to setup the debug bus to route the desired signals to the performance counter hardware to be counted. The RTAS call must set the routing registers appropriately in each of the islands to pass the signals down the debug bus as well as routing the signals from a particular island onto the bus. There is a second firmware RTAS call to reset the debug bus to the non pass thru state when the counters are not in use. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Maynard Johnson <mpjohn@us.ibm.com> Signed-off-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-11-01[POWERPC] Fix oprofile support for e500 in arch/powerpcAndy Fleming
Fixed a compile error in building the 85xx support with oprofile, and in the process cleaned up some issues with the fsl_booke performance monitor code. * Reorganized FSL Book-E performance monitoring code so that the 7450 wouldn't be built if the e500 was, and cleaned it up so it was more self-contained. * Added a cpu_setup function for FSL Book-E. The original cpu_setup function prototype had no arguments, assuming that the reg_setup function would copy the required information into variables which represented the registers. This was silly for e500, since it has 1 register per counter (rather than 3 for all counters), so the code has been restructured to have cpu_setup take the current counter config array as an argument, with op_powerpc_setup() invoking op_powerpc_cpu_setup() through on_each_cpu(), and op_powerpc_cpu_setup() invoking the model-specific cpu_setup function with an argument. The argument is ignored on all other platforms at present. * Fixed a confusing line where a trinary operator only had two arguments Signed-off-by: Andrew Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-06-26[PATCH] oprofile: Fix unnecessary clevernessMarkus Armbruster
nmi_create_files() in arch/i386/oprofile/nmi_int.c depends on model->num_counters (number of performance counters) being less than 10. While this is currently the case, it's too clever by half. Other archs aren't quite as clever: they assume 100. I suggest to normalize them all to 1000. Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-21[POWERPC] re-enable OProfile for iSeries, using timer interruptKelly Daly
This patch removes the changes from an earlier patch that disables oProfile for iSeries within the oProfile KConfig (submitted Feb 23, 2006). Checks within the arch init for iSeries, still allowing profiling for timer interrupts (using firmware_has_feature). Signed-off-by: Kelly Daly <kelly@au.ibm.com> Acked-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-04-22[PATCH] powerpc: Quiet oprofile output at bootOlof Johansson
No need to always print out which performance monitoring type is used on the console at every boot. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-29[PATCH] powerpc: Remove oprofile spinlock backtrace codeAnton Blanchard
Remove oprofile spinlock backtrace code now we have proper calltrace support. Also make MMCRA sihv and sipr bits a variable since they may change in future cpus. Finally, MMCRA should be a 64bit quantity. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-03-29[PATCH] powerpc: Add oprofile calltrace supportBrian Rogan
Add oprofile calltrace support to powerpc. Disable spinlock backtracing now we can use calltrace info. (Updated to work on both 32bit and 64bit by me). Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-14[PATCH] powerpc: oprofile cpu type names clash with other codeAndy Whitcroft
In 2.6.15-git6 a change was commited in the oprofile support in the powerpc architecture. It introduced the powerpc_oprofile_type which contains the define G4. This causes a name clash with the existing wacom usb tablet driver. CC [M] drivers/usb/input/wacom.o drivers/usb/input/wacom.c:98: error: conflicting types for `G4' include/asm/cputable.h:37: error: previous declaration of `G4' CC [M] drivers/usb/mon/mon_text.o make[3]: *** [drivers/usb/input/wacom.o] Error 1 make[2]: *** [drivers/usb/input] Error 2 The elements of an enum declared in global scope are effectivly global identifiers themselves. As such we need to ensure the names are unique. This patch updates the later oprofile support to use unique names. Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] ppc64: Fix oprofile when compiled as a moduleAnton Blanchard
My recent changes to oprofile broke it when built as a module. Fix it by using an enum instead of a function pointer. This way we still retain the oprofile configuration in the cputable. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-01-09[PATCH] powerpc: G4+ oprofile supportAndy Fleming
This patch adds oprofile support for the 7450 and all its multitudinous derivatives. * Added 7450 (and derivatives) support for oprofile * Changed e500 cputable to have oprofile model and cpu_type fields * Added support for classic 32-bit performance monitor interrupt * Cleaned up common powerpc oprofile code to be as common as possible * Cleaned up oprofile_impl.h to reflect 32 bit classic code * Added 32-bit MMCRx bitfield definitions and SPR numbers Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-10-20[PATCH] powerpc: Merge ppc64 pmc.[ch] with ppc32 perfmon.[ch]David Gibson
This patches the ppc32 and ppc64 versions of the headers and .c files with helper functions for manipulating the performance counting hardware. As a side effect, it removes use of the term "perfmon" from ppc32, thus avoiding confusion with the unrelated performance counter interface from HP Labs also called "perfmon". Built, but not booted, for g5, pSeries, iSeries, and 32-bit Powermac with both ARCH=powerpc and ARCH=ppc{,64} as appropriate. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-28[PATCH] ppc32: make cur_cpu_spec a single pointer instead of an arrayKumar Gala
Changed ppc32 so that cur_cpu_spec is just a single pointer for all CPUs. Additionally, made call_setup_cpu check to see if the cpu_setup pointer is NULL or not before calling the function. This lets remove the dummy cpu_setup calls that just return. Signed-off-by: Kumar Gala <kumar.gala@freescale.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21[PATCH] powerpc: reduce oprofile/common.c differencesStephen Rothwell
Rename and slightly modify {request,free}_perfmon_irq in the ppc code. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-09-21[PATCH] powerpc: merge the rest of arch/ppc*/oprofileStephen Rothwell
- merge common.c - move model specific files - remove stub Makefiles - clean up arch/ppc*/Makefile Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>