aboutsummaryrefslogtreecommitdiff
path: root/drivers/ide/pci/via82cxxx.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ide/pci/via82cxxx.c')
-rw-r--r--drivers/ide/pci/via82cxxx.c656
1 files changed, 656 insertions, 0 deletions
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
new file mode 100644
index 00000000000..069dbffe211
--- /dev/null
+++ b/drivers/ide/pci/via82cxxx.c
@@ -0,0 +1,656 @@
+/*
+ *
+ * Version 3.38
+ *
+ * VIA IDE driver for Linux. Supported southbridges:
+ *
+ * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
+ * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
+ * vt8235, vt8237
+ *
+ * Copyright (c) 2000-2002 Vojtech Pavlik
+ *
+ * Based on the work of:
+ * Michel Aubry
+ * Jeff Garzik
+ * Andre Hedrick
+ *
+ * Documentation:
+ * Obsolete device documentation publically available from via.com.tw
+ * Current device documentation available under NDA only
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+#include <asm/io.h>
+
+#ifdef CONFIG_PPC_MULTIPLATFORM
+#include <asm/processor.h>
+#endif
+
+#include "ide-timing.h"
+
+#define DISPLAY_VIA_TIMINGS
+
+#define VIA_IDE_ENABLE 0x40
+#define VIA_IDE_CONFIG 0x41
+#define VIA_FIFO_CONFIG 0x43
+#define VIA_MISC_1 0x44
+#define VIA_MISC_2 0x45
+#define VIA_MISC_3 0x46
+#define VIA_DRIVE_TIMING 0x48
+#define VIA_8BIT_TIMING 0x4e
+#define VIA_ADDRESS_SETUP 0x4c
+#define VIA_UDMA_TIMING 0x50
+
+#define VIA_UDMA 0x007
+#define VIA_UDMA_NONE 0x000
+#define VIA_UDMA_33 0x001
+#define VIA_UDMA_66 0x002
+#define VIA_UDMA_100 0x003
+#define VIA_UDMA_133 0x004
+#define VIA_BAD_PREQ 0x010 /* Crashes if PREQ# till DDACK# set */
+#define VIA_BAD_CLK66 0x020 /* 66 MHz clock doesn't work correctly */
+#define VIA_SET_FIFO 0x040 /* Needs to have FIFO split set */
+#define VIA_NO_UNMASK 0x080 /* Doesn't work with IRQ unmasking on */
+#define VIA_BAD_ID 0x100 /* Has wrong vendor ID (0x1107) */
+#define VIA_BAD_AST 0x200 /* Don't touch Address Setup Timing */
+
+/*
+ * VIA SouthBridge chips.
+ */
+
+static struct via_isa_bridge {
+ char *name;
+ u16 id;
+ u8 rev_min;
+ u8 rev_max;
+ u16 flags;
+} via_isa_bridges[] = {
+ { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST },
+ { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, VIA_UDMA_100 },
+ { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, VIA_UDMA_100 },
+ { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, VIA_UDMA_100 },
+ { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, VIA_UDMA_100 },
+ { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, VIA_UDMA_66 },
+ { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
+ { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, VIA_UDMA_66 },
+ { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, VIA_UDMA_33 | VIA_BAD_CLK66 },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, VIA_UDMA_33 | VIA_SET_FIFO },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, VIA_UDMA_33 | VIA_SET_FIFO | VIA_BAD_PREQ },
+ { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, VIA_UDMA_33 | VIA_SET_FIFO },
+ { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, VIA_UDMA_33 | VIA_SET_FIFO },
+ { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK },
+ { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
+ { NULL }
+};
+
+static struct via_isa_bridge *via_config;
+static unsigned int via_80w;
+static unsigned int via_clock;
+static char *via_dma[] = { "MWDMA16", "UDMA33", "UDMA66", "UDMA100", "UDMA133" };
+
+/*
+ * VIA /proc entry.
+ */
+
+#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
+
+#include <linux/stat.h>
+#include <linux/proc_fs.h>
+
+static u8 via_proc = 0;
+static unsigned long via_base;
+static struct pci_dev *bmide_dev, *isa_dev;
+
+static char *via_control3[] = { "No limit", "64", "128", "192" };
+
+#define via_print(format, arg...) p += sprintf(p, format "\n" , ## arg)
+#define via_print_drive(name, format, arg...)\
+ p += sprintf(p, name); for (i = 0; i < 4; i++) p += sprintf(p, format, ## arg); p += sprintf(p, "\n");
+
+
+/**
+ * via_get_info - generate via /proc file
+ * @buffer: buffer for data
+ * @addr: set to start of data to use
+ * @offset: current file offset
+ * @count: size of read
+ *
+ * Fills in buffer with the debugging/configuration information for
+ * the VIA chipset tuning and attached drives
+ */
+
+static int via_get_info(char *buffer, char **addr, off_t offset, int count)
+{
+ int speed[4], cycle[4], setup[4], active[4], recover[4], den[4],
+ uen[4], udma[4], umul[4], active8b[4], recover8b[4];
+ struct pci_dev *dev = bmide_dev;
+ unsigned int v, u, i;
+ int len;
+ u16 c, w;
+ u8 t, x;
+ char *p = buffer;
+
+ via_print("----------VIA BusMastering IDE Configuration"
+ "----------------");
+
+ via_print("Driver Version: 3.38");
+ via_print("South Bridge: VIA %s",
+ via_config->name);
+
+ pci_read_config_byte(isa_dev, PCI_REVISION_ID, &t);
+ pci_read_config_byte(dev, PCI_REVISION_ID, &x);
+ via_print("Revision: ISA %#x IDE %#x", t, x);
+ via_print("Highest DMA rate: %s",
+ via_dma[via_config->flags & VIA_UDMA]);
+
+ via_print("BM-DMA base: %#lx", via_base);
+ via_print("PCI clock: %d.%dMHz",
+ via_clock / 1000, via_clock / 100 % 10);
+
+ pci_read_config_byte(dev, VIA_MISC_1, &t);
+ via_print("Master Read Cycle IRDY: %dws",
+ (t & 64) >> 6);
+ via_print("Master Write Cycle IRDY: %dws",
+ (t & 32) >> 5);
+ via_print("BM IDE Status Register Read Retry: %s",
+ (t & 8) ? "yes" : "no");
+
+ pci_read_config_byte(dev, VIA_MISC_3, &t);
+ via_print("Max DRDY Pulse Width: %s%s",
+ via_control3[(t & 0x03)], (t & 0x03) ? " PCI clocks" : "");
+
+ via_print("-----------------------Primary IDE"
+ "-------Secondary IDE------");
+ via_print("Read DMA FIFO flush: %10s%20s",
+ (t & 0x80) ? "yes" : "no", (t & 0x40) ? "yes" : "no");
+ via_print("End Sector FIFO flush: %10s%20s",
+ (t & 0x20) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
+
+ pci_read_config_byte(dev, VIA_IDE_CONFIG, &t);
+ via_print("Prefetch Buffer: %10s%20s",
+ (t & 0x80) ? "yes" : "no", (t & 0x20) ? "yes" : "no");
+ via_print("Post Write Buffer: %10s%20s",
+ (t & 0x40) ? "yes" : "no", (t & 0x10) ? "yes" : "no");
+
+ pci_read_config_byte(dev, VIA_IDE_ENABLE, &t);
+ via_print("Enabled: %10s%20s",
+ (t & 0x02) ? "yes" : "no", (t & 0x01) ? "yes" : "no");
+
+ c = inb(via_base + 0x02) | (inb(via_base + 0x0a) << 8);
+ via_print("Simplex only: %10s%20s",
+ (c & 0x80) ? "yes" : "no", (c & 0x8000) ? "yes" : "no");
+
+ via_print("Cable Type: %10s%20s",
+ (via_80w & 1) ? "80w" : "40w", (via_80w & 2) ? "80w" : "40w");
+
+ via_print("-------------------drive0----drive1"
+ "----drive2----drive3-----");
+
+ pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
+ pci_read_config_dword(dev, VIA_DRIVE_TIMING, &v);
+ pci_read_config_word(dev, VIA_8BIT_TIMING, &w);
+
+ if (via_config->flags & VIA_UDMA)
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+ else u = 0;
+
+ for (i = 0; i < 4; i++) {
+
+ setup[i] = ((t >> ((3 - i) << 1)) & 0x3) + 1;
+ recover8b[i] = ((w >> ((1 - (i >> 1)) << 3)) & 0xf) + 1;
+ active8b[i] = ((w >> (((1 - (i >> 1)) << 3) + 4)) & 0xf) + 1;
+ active[i] = ((v >> (((3 - i) << 3) + 4)) & 0xf) + 1;
+ recover[i] = ((v >> ((3 - i) << 3)) & 0xf) + 1;
+ udma[i] = ((u >> ((3 - i) << 3)) & 0x7) + 2;
+ umul[i] = ((u >> (((3 - i) & 2) << 3)) & 0x8) ? 1 : 2;
+ uen[i] = ((u >> ((3 - i) << 3)) & 0x20);
+ den[i] = (c & ((i & 1) ? 0x40 : 0x20) << ((i & 2) << 2));
+
+ speed[i] = 2 * via_clock / (active[i] + recover[i]);
+ cycle[i] = 1000000 * (active[i] + recover[i]) / via_clock;
+
+ if (!uen[i] || !den[i])
+ continue;
+
+ switch (via_config->flags & VIA_UDMA) {
+
+ case VIA_UDMA_33:
+ speed[i] = 2 * via_clock / udma[i];
+ cycle[i] = 1000000 * udma[i] / via_clock;
+ break;
+
+ case VIA_UDMA_66:
+ speed[i] = 4 * via_clock / (udma[i] * umul[i]);
+ cycle[i] = 500000 * (udma[i] * umul[i]) / via_clock;
+ break;
+
+ case VIA_UDMA_100:
+ speed[i] = 6 * via_clock / udma[i];
+ cycle[i] = 333333 * udma[i] / via_clock;
+ break;
+
+ case VIA_UDMA_133:
+ speed[i] = 8 * via_clock / udma[i];
+ cycle[i] = 250000 * udma[i] / via_clock;
+ break;
+ }
+ }
+
+ via_print_drive("Transfer Mode: ", "%10s",
+ den[i] ? (uen[i] ? "UDMA" : "DMA") : "PIO");
+
+ via_print_drive("Address Setup: ", "%8dns",
+ 1000000 * setup[i] / via_clock);
+ via_print_drive("Cmd Active: ", "%8dns",
+ 1000000 * active8b[i] / via_clock);
+ via_print_drive("Cmd Recovery: ", "%8dns",
+ 1000000 * recover8b[i] / via_clock);
+ via_print_drive("Data Active: ", "%8dns",
+ 1000000 * active[i] / via_clock);
+ via_print_drive("Data Recovery: ", "%8dns",
+ 1000000 * recover[i] / via_clock);
+ via_print_drive("Cycle Time: ", "%8dns",
+ cycle[i]);
+ via_print_drive("Transfer Rate: ", "%4d.%dMB/s",
+ speed[i] / 1000, speed[i] / 100 % 10);
+
+ /* hoping it is less than 4K... */
+ len = (p - buffer) - offset;
+ *addr = buffer + offset;
+
+ return len > count ? count : len;
+}
+
+#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
+
+/**
+ * via_set_speed - write timing registers
+ * @dev: PCI device
+ * @dn: device
+ * @timing: IDE timing data to use
+ *
+ * via_set_speed writes timing values to the chipset registers
+ */
+
+static void via_set_speed(struct pci_dev *dev, u8 dn, struct ide_timing *timing)
+{
+ u8 t;
+
+ if (~via_config->flags & VIA_BAD_AST) {
+ pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
+ t = (t & ~(3 << ((3 - dn) << 1))) | ((FIT(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
+ pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
+ }
+
+ pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
+ ((FIT(timing->act8b, 1, 16) - 1) << 4) | (FIT(timing->rec8b, 1, 16) - 1));
+
+ pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
+ ((FIT(timing->active, 1, 16) - 1) << 4) | (FIT(timing->recover, 1, 16) - 1));
+
+ switch (via_config->flags & VIA_UDMA) {
+ case VIA_UDMA_33: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 5) - 2)) : 0x03; break;
+ case VIA_UDMA_66: t = timing->udma ? (0xe8 | (FIT(timing->udma, 2, 9) - 2)) : 0x0f; break;
+ case VIA_UDMA_100: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+ case VIA_UDMA_133: t = timing->udma ? (0xe0 | (FIT(timing->udma, 2, 9) - 2)) : 0x07; break;
+ default: return;
+ }
+
+ pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
+}
+
+/**
+ * via_set_drive - configure transfer mode
+ * @drive: Drive to set up
+ * @speed: desired speed
+ *
+ * via_set_drive() computes timing values configures the drive and
+ * the chipset to a desired transfer mode. It also can be called
+ * by upper layers.
+ */
+
+static int via_set_drive(ide_drive_t *drive, u8 speed)
+{
+ ide_drive_t *peer = HWIF(drive)->drives + (~drive->dn & 1);
+ struct ide_timing t, p;
+ unsigned int T, UT;
+
+ if (speed != XFER_PIO_SLOW)
+ ide_config_drive_speed(drive, speed);
+
+ T = 1000000000 / via_clock;
+
+ switch (via_config->flags & VIA_UDMA) {
+ case VIA_UDMA_33: UT = T; break;
+ case VIA_UDMA_66: UT = T/2; break;
+ case VIA_UDMA_100: UT = T/3; break;
+ case VIA_UDMA_133: UT = T/4; break;
+ default: UT = T;
+ }
+
+ ide_timing_compute(drive, speed, &t, T, UT);
+
+ if (peer->present) {
+ ide_timing_compute(peer, peer->current_speed, &p, T, UT);
+ ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
+ }
+
+ via_set_speed(HWIF(drive)->pci_dev, drive->dn, &t);
+
+ if (!drive->init_speed)
+ drive->init_speed = speed;
+ drive->current_speed = speed;
+
+ return 0;
+}
+
+/**
+ * via82cxxx_tune_drive - PIO setup
+ * @drive: drive to set up
+ * @pio: mode to use (255 for 'best possible')
+ *
+ * A callback from the upper layers for PIO-only tuning.
+ */
+
+static void via82cxxx_tune_drive(ide_drive_t *drive, u8 pio)
+{
+ if (pio == 255) {
+ via_set_drive(drive,
+ ide_find_best_mode(drive, XFER_PIO | XFER_EPIO));
+ return;
+ }
+
+ via_set_drive(drive, XFER_PIO_0 + min_t(u8, pio, 5));
+}
+
+/**
+ * via82cxxx_ide_dma_check - set up for DMA if possible
+ * @drive: IDE drive to set up
+ *
+ * Set up the drive for the highest supported speed considering the
+ * driver, controller and cable
+ */
+
+static int via82cxxx_ide_dma_check (ide_drive_t *drive)
+{
+ u16 w80 = HWIF(drive)->udma_four;
+
+ u16 speed = ide_find_best_mode(drive,
+ XFER_PIO | XFER_EPIO | XFER_SWDMA | XFER_MWDMA |
+ (via_config->flags & VIA_UDMA ? XFER_UDMA : 0) |
+ (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_66 ? XFER_UDMA_66 : 0) |
+ (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_100 ? XFER_UDMA_100 : 0) |
+ (w80 && (via_config->flags & VIA_UDMA) >= VIA_UDMA_133 ? XFER_UDMA_133 : 0));
+
+ via_set_drive(drive, speed);
+
+ if (drive->autodma && (speed & XFER_MODE) != XFER_PIO)
+ return HWIF(drive)->ide_dma_on(drive);
+ return HWIF(drive)->ide_dma_off_quietly(drive);
+}
+
+/**
+ * init_chipset_via82cxxx - initialization handler
+ * @dev: PCI device
+ * @name: Name of interface
+ *
+ * The initialization callback. Here we determine the IDE chip type
+ * and initialize its drive independent registers.
+ */
+
+static unsigned int __init init_chipset_via82cxxx(struct pci_dev *dev, const char *name)
+{
+ struct pci_dev *isa = NULL;
+ u8 t, v;
+ unsigned int u;
+ int i;
+
+ /*
+ * Find the ISA bridge to see how good the IDE is.
+ */
+
+ for (via_config = via_isa_bridges; via_config->id; via_config++)
+ if ((isa = pci_find_device(PCI_VENDOR_ID_VIA +
+ !!(via_config->flags & VIA_BAD_ID),
+ via_config->id, NULL))) {
+
+ pci_read_config_byte(isa, PCI_REVISION_ID, &t);
+ if (t >= via_config->rev_min &&
+ t <= via_config->rev_max)
+ break;
+ }
+
+ if (!via_config->id) {
+ printk(KERN_WARNING "VP_IDE: Unknown VIA SouthBridge, disabling DMA.\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Check 80-wire cable presence and setup Clk66.
+ */
+
+ switch (via_config->flags & VIA_UDMA) {
+
+ case VIA_UDMA_66:
+ /* Enable Clk66 */
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+ pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> (i & 16)) & 8) &&
+ ((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 2)) {
+ /*
+ * 2x PCI clock and
+ * UDMA w/ < 3T/cycle
+ */
+ via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case VIA_UDMA_100:
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 4))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ case VIA_UDMA_133:
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+ for (i = 24; i >= 0; i -= 8)
+ if (((u >> i) & 0x10) ||
+ (((u >> i) & 0x20) &&
+ (((u >> i) & 7) < 6))) {
+ /* BIOS 80-wire bit or
+ * UDMA w/ < 60ns/cycle
+ */
+ via_80w |= (1 << (1 - (i >> 4)));
+ }
+ break;
+
+ }
+
+ /* Disable Clk66 */
+ if (via_config->flags & VIA_BAD_CLK66) {
+ /* Would cause trouble on 596a and 686 */
+ pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
+ pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
+ }
+
+ /*
+ * Check whether interfaces are enabled.
+ */
+
+ pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
+
+ /*
+ * Set up FIFO sizes and thresholds.
+ */
+
+ pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
+
+ /* Disable PREQ# till DDACK# */
+ if (via_config->flags & VIA_BAD_PREQ) {
+ /* Would crash on 586b rev 41 */
+ t &= 0x7f;
+ }
+
+ /* Fix FIFO split between channels */
+ if (via_config->flags & VIA_SET_FIFO) {
+ t &= (t & 0x9f);
+ switch (v & 3) {
+ case 2: t |= 0x00; break; /* 16 on primary */
+ case 1: t |= 0x60; break; /* 16 on secondary */
+ case 3: t |= 0x20; break; /* 8 pri 8 sec */
+ }
+ }
+
+ pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
+
+ /*
+ * Determine system bus clock.
+ */
+
+ via_clock = system_bus_clock() * 1000;
+
+ switch (via_clock) {
+ case 33000: via_clock = 33333; break;
+ case 37000: via_clock = 37500; break;
+ case 41000: via_clock = 41666; break;
+ }
+
+ if (via_clock < 20000 || via_clock > 50000) {
+ printk(KERN_WARNING "VP_IDE: User given PCI clock speed "
+ "impossible (%d), using 33 MHz instead.\n", via_clock);
+ printk(KERN_WARNING "VP_IDE: Use ide0=ata66 if you want "
+ "to assume 80-wire cable.\n");
+ via_clock = 33333;
+ }
+
+ /*
+ * Print the boot message.
+ */
+
+ pci_read_config_byte(isa, PCI_REVISION_ID, &t);
+ printk(KERN_INFO "VP_IDE: VIA %s (rev %02x) IDE %s "
+ "controller on pci%s\n",
+ via_config->name, t,
+ via_dma[via_config->flags & VIA_UDMA],
+ pci_name(dev));
+
+ /*
+ * Setup /proc/ide/via entry.
+ */
+
+#if defined(DISPLAY_VIA_TIMINGS) && defined(CONFIG_PROC_FS)
+ if (!via_proc) {
+ via_base = pci_resource_start(dev, 4);
+ bmide_dev = dev;
+ isa_dev = isa;
+ ide_pci_create_host_proc("via", via_get_info);
+ via_proc = 1;
+ }
+#endif /* DISPLAY_VIA_TIMINGS && CONFIG_PROC_FS */
+ return 0;
+}
+
+static void __init init_hwif_via82cxxx(ide_hwif_t *hwif)
+{
+ int i;
+
+ hwif->autodma = 0;
+
+ hwif->tuneproc = &via82cxxx_tune_drive;
+ hwif->speedproc = &via_set_drive;
+
+
+#if defined(CONFIG_PPC_MULTIPLATFORM) && defined(CONFIG_PPC32)
+ if(_machine == _MACH_chrp && _chrp_type == _CHRP_Pegasos) {
+ hwif->irq = hwif->channel ? 15 : 14;
+ }
+#endif
+
+ for (i = 0; i < 2; i++) {
+ hwif->drives[i].io_32bit = 1;
+ hwif->drives[i].unmask = (via_config->flags & VIA_NO_UNMASK) ? 0 : 1;
+ hwif->drives[i].autotune = 1;
+ hwif->drives[i].dn = hwif->channel * 2 + i;
+ }
+
+ if (!hwif->dma_base)
+ return;
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x7f;
+ hwif->mwdma_mask = 0x07;
+ hwif->swdma_mask = 0x07;
+
+ if (!hwif->udma_four)
+ hwif->udma_four = (via_80w >> hwif->channel) & 1;
+ hwif->ide_dma_check = &via82cxxx_ide_dma_check;
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+static ide_pci_device_t via82cxxx_chipset __devinitdata = {
+ .name = "VP_IDE",
+ .init_chipset = init_chipset_via82cxxx,
+ .init_hwif = init_hwif_via82cxxx,
+ .channels = 2,
+ .autodma = NOAUTODMA,
+ .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}},
+ .bootable = ON_BOARD,
+};
+
+static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &via82cxxx_chipset);
+}
+
+static struct pci_device_id via_pci_tbl[] = {
+ { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C576_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, via_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "VIA_IDE",
+ .id_table = via_pci_tbl,
+ .probe = via_init_one,
+};
+
+static int via_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(via_ide_init);
+
+MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
+MODULE_DESCRIPTION("PCI driver module for VIA IDE");
+MODULE_LICENSE("GPL");