aboutsummaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/Kconfig4
-rw-r--r--drivers/hwmon/adt7470.c2
-rw-r--r--drivers/hwmon/applesmc.c24
-rw-r--r--drivers/hwmon/hih6130.c16
-rw-r--r--drivers/hwmon/k10temp.c3
-rw-r--r--drivers/hwmon/lm78.c2
-rw-r--r--drivers/hwmon/lm90.c11
-rw-r--r--drivers/hwmon/max6697.c4
-rw-r--r--drivers/hwmon/nct6775.c92
-rw-r--r--drivers/hwmon/sis5595.c2
-rw-r--r--drivers/hwmon/vt8231.c2
-rw-r--r--drivers/hwmon/w83l786ng.c13
12 files changed, 128 insertions, 47 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 0428e8a74b1..df064e8cd9d 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -296,8 +296,8 @@ config SENSORS_K10TEMP
If you say yes here you get support for the temperature
sensor(s) inside your CPU. Supported are later revisions of
the AMD Family 10h and all revisions of the AMD Family 11h,
- 12h (Llano), 14h (Brazos) and 15h (Bulldozer/Trinity)
- microarchitectures.
+ 12h (Llano), 14h (Brazos), 15h (Bulldozer/Trinity) and
+ 16h (Kabini) microarchitectures.
This driver can also be built as a module. If so, the module
will be called k10temp.
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index b83bf4bb95e..58637355c1f 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -215,7 +215,7 @@ static inline int adt7470_write_word_data(struct i2c_client *client, u8 reg,
u16 value)
{
return i2c_smbus_write_byte_data(client, reg, value & 0xFF)
- && i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
+ || i2c_smbus_write_byte_data(client, reg + 1, value >> 8);
}
static void adt7470_init_client(struct i2c_client *client)
diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c
index 62c2e32e25e..3288f13d2d8 100644
--- a/drivers/hwmon/applesmc.c
+++ b/drivers/hwmon/applesmc.c
@@ -230,6 +230,7 @@ static int send_argument(const char *key)
static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
{
+ u8 status, data = 0;
int i;
if (send_command(cmd) || send_argument(key)) {
@@ -237,6 +238,7 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
return -EIO;
}
+ /* This has no effect on newer (2012) SMCs */
if (send_byte(len, APPLESMC_DATA_PORT)) {
pr_warn("%.4s: read len fail\n", key);
return -EIO;
@@ -250,6 +252,17 @@ static int read_smc(u8 cmd, const char *key, u8 *buffer, u8 len)
buffer[i] = inb(APPLESMC_DATA_PORT);
}
+ /* Read the data port until bit0 is cleared */
+ for (i = 0; i < 16; i++) {
+ udelay(APPLESMC_MIN_WAIT);
+ status = inb(APPLESMC_CMD_PORT);
+ if (!(status & 0x01))
+ break;
+ data = inb(APPLESMC_DATA_PORT);
+ }
+ if (i)
+ pr_warn("flushed %d bytes, last value is: %d\n", i, data);
+
return 0;
}
@@ -525,16 +538,25 @@ static int applesmc_init_smcreg_try(void)
{
struct applesmc_registers *s = &smcreg;
bool left_light_sensor, right_light_sensor;
+ unsigned int count;
u8 tmp[1];
int ret;
if (s->init_complete)
return 0;
- ret = read_register_count(&s->key_count);
+ ret = read_register_count(&count);
if (ret)
return ret;
+ if (s->cache && s->key_count != count) {
+ pr_warn("key count changed from %d to %d\n",
+ s->key_count, count);
+ kfree(s->cache);
+ s->cache = NULL;
+ }
+ s->key_count = count;
+
if (!s->cache)
s->cache = kcalloc(s->key_count, sizeof(*s->cache), GFP_KERNEL);
if (!s->cache)
diff --git a/drivers/hwmon/hih6130.c b/drivers/hwmon/hih6130.c
index 2dc37c7c694..7d68a08baaa 100644
--- a/drivers/hwmon/hih6130.c
+++ b/drivers/hwmon/hih6130.c
@@ -43,6 +43,7 @@
* @last_update: time of last update (jiffies)
* @temperature: cached temperature measurement value
* @humidity: cached humidity measurement value
+ * @write_length: length for I2C measurement request
*/
struct hih6130 {
struct device *hwmon_dev;
@@ -51,6 +52,7 @@ struct hih6130 {
unsigned long last_update;
int temperature;
int humidity;
+ size_t write_length;
};
/**
@@ -121,8 +123,15 @@ static int hih6130_update_measurements(struct i2c_client *client)
*/
if (time_after(jiffies, hih6130->last_update + HZ) || !hih6130->valid) {
- /* write to slave address, no data, to request a measurement */
- ret = i2c_master_send(client, tmp, 0);
+ /*
+ * Write to slave address to request a measurement.
+ * According with the datasheet it should be with no data, but
+ * for systems with I2C bus drivers that do not allow zero
+ * length packets we write one dummy byte to allow sensor
+ * measurements on them.
+ */
+ tmp[0] = 0;
+ ret = i2c_master_send(client, tmp, hih6130->write_length);
if (ret < 0)
goto out;
@@ -252,6 +261,9 @@ static int hih6130_probe(struct i2c_client *client,
goto fail_remove_sysfs;
}
+ if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_QUICK))
+ hih6130->write_length = 1;
+
return 0;
fail_remove_sysfs:
diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c
index e3b037c73a7..e633856370c 100644
--- a/drivers/hwmon/k10temp.c
+++ b/drivers/hwmon/k10temp.c
@@ -1,5 +1,5 @@
/*
- * k10temp.c - AMD Family 10h/11h/12h/14h/15h processor hardware monitoring
+ * k10temp.c - AMD Family 10h/11h/12h/14h/15h/16h processor hardware monitoring
*
* Copyright (c) 2009 Clemens Ladisch <clemens@ladisch.de>
*
@@ -211,6 +211,7 @@ static DEFINE_PCI_DEVICE_TABLE(k10temp_id_table) = {
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CNB17H_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{}
};
MODULE_DEVICE_TABLE(pci, k10temp_id_table);
diff --git a/drivers/hwmon/lm78.c b/drivers/hwmon/lm78.c
index 6cf6bff7900..a2f3b4a365e 100644
--- a/drivers/hwmon/lm78.c
+++ b/drivers/hwmon/lm78.c
@@ -94,6 +94,8 @@ static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm <= 0)
return 255;
+ if (rpm > 1350000)
+ return 1;
return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 8eeb141c85a..74813130d21 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -278,7 +278,7 @@ static const struct lm90_params lm90_params[] = {
[max6696] = {
.flags = LM90_HAVE_EMERGENCY
| LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3,
- .alert_alarms = 0x187c,
+ .alert_alarms = 0x1c7c,
.max_convrate = 6,
.reg_local_ext = MAX6657_REG_R_LOCAL_TEMPL,
},
@@ -1500,19 +1500,22 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag)
if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) {
dev_info(&client->dev, "Everything OK\n");
} else {
- if (alarms & 0x61)
+ if ((alarms & 0x61) || (alarms2 & 0x80))
dev_warn(&client->dev,
"temp%d out of range, please check!\n", 1);
- if (alarms & 0x1a)
+ if ((alarms & 0x1a) || (alarms2 & 0x20))
dev_warn(&client->dev,
"temp%d out of range, please check!\n", 2);
if (alarms & 0x04)
dev_warn(&client->dev,
"temp%d diode open, please check!\n", 2);
- if (alarms2 & 0x18)
+ if (alarms2 & 0x5a)
dev_warn(&client->dev,
"temp%d out of range, please check!\n", 3);
+ if (alarms2 & 0x04)
+ dev_warn(&client->dev,
+ "temp%d diode open, please check!\n", 3);
/*
* Disable ALERT# output, because these chips don't implement
diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
index 328fb0353c1..a41b5f3fc50 100644
--- a/drivers/hwmon/max6697.c
+++ b/drivers/hwmon/max6697.c
@@ -605,12 +605,12 @@ static int max6697_init_chip(struct i2c_client *client)
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(client, MAX6581_REG_IDEALITY,
- pdata->ideality_mask >> 1);
+ pdata->ideality_value);
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(client,
MAX6581_REG_IDEALITY_SELECT,
- pdata->ideality_value);
+ pdata->ideality_mask >> 1);
if (ret < 0)
return ret;
}
diff --git a/drivers/hwmon/nct6775.c b/drivers/hwmon/nct6775.c
index 04638aee903..99cec182542 100644
--- a/drivers/hwmon/nct6775.c
+++ b/drivers/hwmon/nct6775.c
@@ -199,7 +199,7 @@ static const s8 NCT6775_ALARM_BITS[] = {
0, 1, 2, 3, 8, 21, 20, 16, /* in0.. in7 */
17, -1, -1, -1, -1, -1, -1, /* in8..in14 */
-1, /* unused */
- 6, 7, 11, 10, 23, /* fan1..fan5 */
+ 6, 7, 11, -1, -1, /* fan1..fan5 */
-1, -1, -1, /* unused */
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, -1 }; /* intrusion0, intrusion1 */
@@ -625,6 +625,7 @@ struct nct6775_data {
u8 has_fan_min; /* some fans don't have min register */
bool has_fan_div;
+ u8 num_temp_alarms; /* 2 or 3 */
u8 temp_fixed_num; /* 3 or 6 */
u8 temp_type[NUM_TEMP_FIXED];
s8 temp_offset[NUM_TEMP_FIXED];
@@ -1193,6 +1194,42 @@ show_alarm(struct device *dev, struct device_attribute *attr, char *buf)
(unsigned int)((data->alarms >> nr) & 0x01));
}
+static int find_temp_source(struct nct6775_data *data, int index, int count)
+{
+ int source = data->temp_src[index];
+ int nr;
+
+ for (nr = 0; nr < count; nr++) {
+ int src;
+
+ src = nct6775_read_value(data,
+ data->REG_TEMP_SOURCE[nr]) & 0x1f;
+ if (src == source)
+ return nr;
+ }
+ return -1;
+}
+
+static ssize_t
+show_temp_alarm(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ struct nct6775_data *data = nct6775_update_device(dev);
+ unsigned int alarm = 0;
+ int nr;
+
+ /*
+ * For temperatures, there is no fixed mapping from registers to alarm
+ * bits. Alarm bits are determined by the temperature source mapping.
+ */
+ nr = find_temp_source(data, sattr->index, data->num_temp_alarms);
+ if (nr >= 0) {
+ int bit = data->ALARM_BITS[nr + TEMP_ALARM_BASE];
+ alarm = (data->alarms >> bit) & 0x01;
+ }
+ return sprintf(buf, "%u\n", alarm);
+}
+
static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in_reg, NULL, 0, 0);
static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in_reg, NULL, 1, 0);
static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in_reg, NULL, 2, 0);
@@ -1874,22 +1911,18 @@ static struct sensor_device_attribute sda_temp_type[] = {
};
static struct sensor_device_attribute sda_temp_alarm[] = {
- SENSOR_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL,
- TEMP_ALARM_BASE),
- SENSOR_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL,
- TEMP_ALARM_BASE + 1),
- SENSOR_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL,
- TEMP_ALARM_BASE + 2),
- SENSOR_ATTR(temp4_alarm, S_IRUGO, show_alarm, NULL,
- TEMP_ALARM_BASE + 3),
- SENSOR_ATTR(temp5_alarm, S_IRUGO, show_alarm, NULL,
- TEMP_ALARM_BASE + 4),
- SENSOR_ATTR(temp6_alarm, S_IRUGO, show_alarm, NULL,
- TEMP_ALARM_BASE + 5),
+ SENSOR_ATTR(temp1_alarm, S_IRUGO, show_temp_alarm, NULL, 0),
+ SENSOR_ATTR(temp2_alarm, S_IRUGO, show_temp_alarm, NULL, 1),
+ SENSOR_ATTR(temp3_alarm, S_IRUGO, show_temp_alarm, NULL, 2),
+ SENSOR_ATTR(temp4_alarm, S_IRUGO, show_temp_alarm, NULL, 3),
+ SENSOR_ATTR(temp5_alarm, S_IRUGO, show_temp_alarm, NULL, 4),
+ SENSOR_ATTR(temp6_alarm, S_IRUGO, show_temp_alarm, NULL, 5),
+ SENSOR_ATTR(temp7_alarm, S_IRUGO, show_temp_alarm, NULL, 6),
+ SENSOR_ATTR(temp8_alarm, S_IRUGO, show_temp_alarm, NULL, 7),
+ SENSOR_ATTR(temp9_alarm, S_IRUGO, show_temp_alarm, NULL, 8),
+ SENSOR_ATTR(temp10_alarm, S_IRUGO, show_temp_alarm, NULL, 9),
};
-#define NUM_TEMP_ALARM ARRAY_SIZE(sda_temp_alarm)
-
static ssize_t
show_pwm_mode(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -3215,13 +3248,11 @@ static void nct6775_device_remove_files(struct device *dev)
device_remove_file(dev, &sda_temp_max[i].dev_attr);
device_remove_file(dev, &sda_temp_max_hyst[i].dev_attr);
device_remove_file(dev, &sda_temp_crit[i].dev_attr);
+ device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
if (!(data->have_temp_fixed & (1 << i)))
continue;
device_remove_file(dev, &sda_temp_type[i].dev_attr);
device_remove_file(dev, &sda_temp_offset[i].dev_attr);
- if (i >= NUM_TEMP_ALARM)
- continue;
- device_remove_file(dev, &sda_temp_alarm[i].dev_attr);
}
device_remove_file(dev, &sda_caseopen[0].dev_attr);
@@ -3419,6 +3450,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->auto_pwm_num = 6;
data->has_fan_div = true;
data->temp_fixed_num = 3;
+ data->num_temp_alarms = 3;
data->ALARM_BITS = NCT6775_ALARM_BITS;
@@ -3483,6 +3515,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->auto_pwm_num = 4;
data->has_fan_div = false;
data->temp_fixed_num = 3;
+ data->num_temp_alarms = 3;
data->ALARM_BITS = NCT6776_ALARM_BITS;
@@ -3547,6 +3580,7 @@ static int nct6775_probe(struct platform_device *pdev)
data->auto_pwm_num = 4;
data->has_fan_div = false;
data->temp_fixed_num = 6;
+ data->num_temp_alarms = 2;
data->ALARM_BITS = NCT6779_ALARM_BITS;
@@ -3843,10 +3877,12 @@ static int nct6775_probe(struct platform_device *pdev)
&sda_fan_input[i].dev_attr);
if (err)
goto exit_remove;
- err = device_create_file(dev,
- &sda_fan_alarm[i].dev_attr);
- if (err)
- goto exit_remove;
+ if (data->ALARM_BITS[FAN_ALARM_BASE + i] >= 0) {
+ err = device_create_file(dev,
+ &sda_fan_alarm[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
if (data->kind != nct6776 &&
data->kind != nct6779) {
err = device_create_file(dev,
@@ -3897,6 +3933,12 @@ static int nct6775_probe(struct platform_device *pdev)
if (err)
goto exit_remove;
}
+ if (find_temp_source(data, i, data->num_temp_alarms) >= 0) {
+ err = device_create_file(dev,
+ &sda_temp_alarm[i].dev_attr);
+ if (err)
+ goto exit_remove;
+ }
if (!(data->have_temp_fixed & (1 << i)))
continue;
err = device_create_file(dev, &sda_temp_type[i].dev_attr);
@@ -3905,12 +3947,6 @@ static int nct6775_probe(struct platform_device *pdev)
err = device_create_file(dev, &sda_temp_offset[i].dev_attr);
if (err)
goto exit_remove;
- if (i >= NUM_TEMP_ALARM ||
- data->ALARM_BITS[TEMP_ALARM_BASE + i] < 0)
- continue;
- err = device_create_file(dev, &sda_temp_alarm[i].dev_attr);
- if (err)
- goto exit_remove;
}
for (i = 0; i < ARRAY_SIZE(sda_caseopen); i++) {
diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 1404e6319de..72a889702f0 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -141,6 +141,8 @@ static inline u8 FAN_TO_REG(long rpm, int div)
{
if (rpm <= 0)
return 255;
+ if (rpm > 1350000)
+ return 1;
return clamp_val((1350000 + rpm * div / 2) / (rpm * div), 1, 254);
}
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 0e7017841f7..aee14e2192f 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -145,7 +145,7 @@ static const u8 regtempmin[] = { 0x3a, 0x3e, 0x2c, 0x2e, 0x30, 0x32 };
*/
static inline u8 FAN_TO_REG(long rpm, int div)
{
- if (rpm == 0)
+ if (rpm <= 0 || rpm > 1310720)
return 0;
return clamp_val(1310720 / (rpm * div), 1, 255);
}
diff --git a/drivers/hwmon/w83l786ng.c b/drivers/hwmon/w83l786ng.c
index edb06cda5a6..6ed76ceb927 100644
--- a/drivers/hwmon/w83l786ng.c
+++ b/drivers/hwmon/w83l786ng.c
@@ -481,9 +481,11 @@ store_pwm(struct device *dev, struct device_attribute *attr,
if (err)
return err;
val = clamp_val(val, 0, 255);
+ val = DIV_ROUND_CLOSEST(val, 0x11);
mutex_lock(&data->update_lock);
- data->pwm[nr] = val;
+ data->pwm[nr] = val * 0x11;
+ val |= w83l786ng_read_value(client, W83L786NG_REG_PWM[nr]) & 0xf0;
w83l786ng_write_value(client, W83L786NG_REG_PWM[nr], val);
mutex_unlock(&data->update_lock);
return count;
@@ -510,7 +512,7 @@ store_pwm_enable(struct device *dev, struct device_attribute *attr,
mutex_lock(&data->update_lock);
reg = w83l786ng_read_value(client, W83L786NG_REG_FAN_CFG);
data->pwm_enable[nr] = val;
- reg &= ~(0x02 << W83L786NG_PWM_ENABLE_SHIFT[nr]);
+ reg &= ~(0x03 << W83L786NG_PWM_ENABLE_SHIFT[nr]);
reg |= (val - 1) << W83L786NG_PWM_ENABLE_SHIFT[nr];
w83l786ng_write_value(client, W83L786NG_REG_FAN_CFG, reg);
mutex_unlock(&data->update_lock);
@@ -776,9 +778,10 @@ static struct w83l786ng_data *w83l786ng_update_device(struct device *dev)
((pwmcfg >> W83L786NG_PWM_MODE_SHIFT[i]) & 1)
? 0 : 1;
data->pwm_enable[i] =
- ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 2) + 1;
- data->pwm[i] = w83l786ng_read_value(client,
- W83L786NG_REG_PWM[i]);
+ ((pwmcfg >> W83L786NG_PWM_ENABLE_SHIFT[i]) & 3) + 1;
+ data->pwm[i] =
+ (w83l786ng_read_value(client, W83L786NG_REG_PWM[i])
+ & 0x0f) * 0x11;
}
generated by cgit v1.2.3 (git 2.25.1) at 2024-05-02 12:05:03 +0000