diff options
Diffstat (limited to 'arch')
43 files changed, 3052 insertions, 82 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 136f263ed47..c24b364bb8c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1521,6 +1521,13 @@ config MCPM for (multi-)cluster based systems, such as big.LITTLE based systems. +config BIG_LITTLE + bool "big.LITTLE support (Experimental)" + depends on CPU_V7 && SMP + select MCPM + help + This option enables support for the big.LITTLE architecture. + choice prompt "Memory split" default VMSPLIT_3G diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f0895c581a8..00baf9f5766 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -202,7 +202,14 @@ dtb-$(CONFIG_ARCH_VERSATILE) += versatile-ab.dtb \ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb + vexpress-v2p-ca15_a7.dtb \ + rtsm_ve-cortex_a9x2.dtb \ + rtsm_ve-cortex_a9x4.dtb \ + rtsm_ve-cortex_a15x1.dtb \ + rtsm_ve-cortex_a15x2.dtb \ + rtsm_ve-cortex_a15x4.dtb \ + rtsm_ve-v2p-ca15x1-ca7x1.dtb \ + rtsm_ve-v2p-ca15x4-ca7x4.dtb dtb-$(CONFIG_ARCH_VIRT) += xenvm-4.2.dtb dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8505-ref.dtb \ diff --git a/arch/arm/boot/dts/clcd-panels.dtsi b/arch/arm/boot/dts/clcd-panels.dtsi new file mode 100644 index 00000000000..0b0ff6ead4b --- /dev/null +++ b/arch/arm/boot/dts/clcd-panels.dtsi @@ -0,0 +1,52 @@ +/* + * ARM Ltd. Versatile Express + * + */ + +/ { + panels { + panel@0 { + compatible = "panel"; + mode = "VGA"; + refresh = <60>; + xres = <640>; + yres = <480>; + pixclock = <39721>; + left_margin = <40>; + right_margin = <24>; + upper_margin = <32>; + lower_margin = <11>; + hsync_len = <96>; + vsync_len = <2>; + sync = <0>; + vmode = "FB_VMODE_NONINTERLACED"; + + tim2 = "TIM2_BCD", "TIM2_IPC"; + cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; + caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; + bpp = <16>; + }; + + panel@1 { + compatible = "panel"; + mode = "XVGA"; + refresh = <60>; + xres = <1024>; + yres = <768>; + pixclock = <15748>; + left_margin = <152>; + right_margin = <48>; + upper_margin = <23>; + lower_margin = <3>; + hsync_len = <104>; + vsync_len = <4>; + sync = <0>; + vmode = "FB_VMODE_NONINTERLACED"; + + tim2 = "TIM2_BCD", "TIM2_IPC"; + cntl = "CNTL_LCDTFT", "CNTL_BGR", "CNTL_LCDVCOMP(1)"; + caps = "CLCD_CAP_5551", "CLCD_CAP_565", "CLCD_CAP_888"; + bpp = <16>; + }; + }; +}; diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts new file mode 100644 index 00000000000..c9eee916aa7 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x1.dts @@ -0,0 +1,159 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x1CT + * + * RTSM_VE_Cortex_A15x1.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x1"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x1", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts new file mode 100644 index 00000000000..853a166e3c3 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x2.dts @@ -0,0 +1,165 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x2CT + * + * RTSM_VE_Cortex_A15x2.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x2"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x2", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts new file mode 100644 index 00000000000..c1947a3a5c8 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a15x4.dts @@ -0,0 +1,177 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * + * RTSM_VE_Cortex_A15x4.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA15x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts new file mode 100644 index 00000000000..fca6b2f7967 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a9x2.dts @@ -0,0 +1,171 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA9MPx2CT + * + * RTSM_VE_Cortex_A9x2.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA9x2"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a9x2", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@2c000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf04>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts b/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts new file mode 100644 index 00000000000..fd8a6ed97a0 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-cortex_a9x4.dts @@ -0,0 +1,183 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA9MPx4CT + * + * RTSM_VE_Cortex_A9x4.lisa + */ + +/dts-v1/; + +/ { + model = "RTSM_VE_CortexA9x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a9x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <1>; + #size-cells = <1>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <2>; + }; + + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <3>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0x80000000 0x80000000>; + }; + + scu@2c000000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x2c000000 0x58>; + }; + + timer@2c000600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x2c000600 0x20>; + interrupts = <1 13 0xf04>; + }; + + watchdog@2c000620 { + compatible = "arm,cortex-a9-twd-wdt"; + reg = <0x2c000620 0x20>; + interrupts = <1 14 0xf04>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0x2c001000 0x1000>, + <0x2c000100 0x100>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x08000000 0x04000000>, + <1 0 0x14000000 0x04000000>, + <2 0 0x18000000 0x04000000>, + <3 0 0x1c000000 0x04000000>, + <4 0 0x0c000000 0x04000000>, + <5 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi b/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi new file mode 100644 index 00000000000..6d125662612 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-motherboard.dtsi @@ -0,0 +1,224 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * Motherboard component + * + * VEMotherBoard.lisa + */ + + motherboard { + compatible = "arm,vexpress,v2m-p1", "simple-bus"; + arm,hbi = <0x190>; + arm,vexpress,site = <0>; + arm,v2m-memory-map = "rs1"; + #address-cells = <2>; /* SMB chipselect number and offset */ + #size-cells = <1>; + #interrupt-cells = <1>; + ranges; + + flash@0,00000000 { + compatible = "arm,vexpress-flash", "cfi-flash"; + reg = <0 0x00000000 0x04000000>, + <4 0x00000000 0x04000000>; + bank-width = <4>; + }; + + vram@2,00000000 { + compatible = "arm,vexpress-vram"; + reg = <2 0x00000000 0x00800000>; + }; + + ethernet@2,02000000 { + compatible = "smsc,lan91c111"; + reg = <2 0x02000000 0x10000>; + interrupts = <15>; + }; + + iofpga@3,00000000 { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 3 0 0x200000>; + + v2m_sysreg: sysreg@010000 { + compatible = "arm,vexpress-sysreg"; + reg = <0x010000 0x1000>; + gpio-controller; + #gpio-cells = <2>; + }; + + v2m_sysctl: sysctl@020000 { + compatible = "arm,sp810", "arm,primecell"; + reg = <0x020000 0x1000>; + clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&smbclk>; + clock-names = "refclk", "timclk", "apb_pclk"; + #clock-cells = <1>; + clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3"; + }; + + aaci@040000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x040000 0x1000>; + interrupts = <11>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; + }; + + mmci@050000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x050000 0x1000>; + interrupts = <9 10>; + cd-gpios = <&v2m_sysreg 0 0>; + wp-gpios = <&v2m_sysreg 1 0>; + max-frequency = <12000000>; + vmmc-supply = <&v2m_fixed_3v3>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "mclk", "apb_pclk"; + }; + + kmi@060000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x060000 0x1000>; + interrupts = <12>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + kmi@070000 { + compatible = "arm,pl050", "arm,primecell"; + reg = <0x070000 0x1000>; + interrupts = <13>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "KMIREFCLK", "apb_pclk"; + }; + + v2m_serial0: uart@090000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x090000 0x1000>; + interrupts = <5>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial1: uart@0a0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0a0000 0x1000>; + interrupts = <6>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial2: uart@0b0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0b0000 0x1000>; + interrupts = <7>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + v2m_serial3: uart@0c0000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x0c0000 0x1000>; + interrupts = <8>; + clocks = <&v2m_clk24mhz>, <&smbclk>; + clock-names = "uartclk", "apb_pclk"; + }; + + wdt@0f0000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0x0f0000 0x1000>; + interrupts = <0>; + clocks = <&v2m_refclk32khz>, <&smbclk>; + clock-names = "wdogclk", "apb_pclk"; + }; + + v2m_timer01: timer@110000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x110000 0x1000>; + interrupts = <2>; + clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + v2m_timer23: timer@120000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x120000 0x1000>; + interrupts = <3>; + clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&smbclk>; + clock-names = "timclken1", "timclken2", "apb_pclk"; + }; + + rtc@170000 { + compatible = "arm,pl031", "arm,primecell"; + reg = <0x170000 0x1000>; + interrupts = <4>; + clocks = <&smbclk>; + clock-names = "apb_pclk"; + }; + + clcd@1f0000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x1f0000 0x1000>; + interrupts = <14>; + clocks = <&v2m_oscclk1>, <&smbclk>; + clock-names = "v2m:oscclk1", "apb_pclk"; + mode = "VGA"; + use_dma = <0>; + framebuffer = <0x18000000 0x00180000>; + }; + }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + v2m_clk24mhz: clk24mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "v2m:clk24mhz"; + }; + + v2m_refclk1mhz: refclk1mhz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000>; + clock-output-names = "v2m:refclk1mhz"; + }; + + v2m_refclk32khz: refclk32khz { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "v2m:refclk32khz"; + }; + + mcc { + compatible = "simple-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + v2m_oscclk1: osc@1 { + /* CLCD clock */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <23750000 63500000>; + #clock-cells = <0>; + clock-output-names = "v2m:oscclk1"; + }; + + muxfpga@0 { + compatible = "arm,vexpress-muxfpga"; + arm,vexpress-sysreg,func = <7 0>; + }; + + shutdown@0 { + compatible = "arm,vexpress-shutdown"; + arm,vexpress-sysreg,func = <8 0>; + }; + }; + }; diff --git a/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts new file mode 100644 index 00000000000..fe8cf5dc857 --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x1-ca7x1.dts @@ -0,0 +1,244 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * ARMCortexA7x4CT + * RTSM_VE_Cortex_A15x1_A7x1.lisa + */ + +/dts-v1/; + +/memreserve/ 0xff000000 0x01000000; + +/ { + model = "RTSM_VE_CortexA15x1-A7x1"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x1_a7x1", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; +// freqs = <500000000 600000000 700000000 800000000 900000000 1000000000 1100000000 1200000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; +// freqs = <350000000 400000000 500000000 600000000 700000000 800000000 900000000 1000000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core1: core@0 { + reg = <0>; + }; + + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cluster = <&cluster1>; + core = <&core1>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + cci@2c090000 { + compatible = "arm,cci-400", "arm,cci"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0 0x60000000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts new file mode 100644 index 00000000000..f715285131d --- /dev/null +++ b/arch/arm/boot/dts/rtsm_ve-v2p-ca15x4-ca7x4.dts @@ -0,0 +1,358 @@ +/* + * ARM Ltd. Fast Models + * + * Versatile Express (VE) system model + * ARMCortexA15x4CT + * ARMCortexA7x4CT + * RTSM_VE_Cortex_A15x4_A7x4.lisa + */ + +/dts-v1/; + +/memreserve/ 0xff000000 0x01000000; + +/ { + model = "RTSM_VE_CortexA15x4-A7x4"; + arm,vexpress,site = <0xf>; + compatible = "arm,rtsm_ve,cortex_a15x4_a7x4", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + }; + + clusters { + #address-cells = <1>; + #size-cells = <0>; + + cluster0: cluster@0 { + reg = <0>; +// freqs = <500000000 600000000 700000000 800000000 900000000 1000000000 1100000000 1200000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + core1: core@1 { + reg = <1>; + }; + + core2: core@2 { + reg = <2>; + }; + + core3: core@3 { + reg = <3>; + }; + + }; + }; + + cluster1: cluster@1 { + reg = <1>; +// freqs = <350000000 400000000 500000000 600000000 700000000 800000000 900000000 1000000000>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core4: core@0 { + reg = <0>; + }; + + core5: core@1 { + reg = <1>; + }; + + core6: core@2 { + reg = <2>; + }; + + core7: core@3 { + reg = <3>; + }; + + }; + }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + cluster = <&cluster0>; + core = <&core1>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <2>; + cluster = <&cluster0>; + core = <&core2>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <3>; + cluster = <&cluster0>; + core = <&core3>; +// clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + cluster = <&cluster1>; + core = <&core4>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu5: cpu@5 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + cluster = <&cluster1>; + core = <&core5>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu6: cpu@6 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + cluster = <&cluster1>; + core = <&core6>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu7: cpu@7 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + cluster = <&cluster1>; + core = <&core7>; +// clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x80000000>; + }; + + cci@2c090000 { + compatible = "arm,cci-400", "arm,cci"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + dcscb@60000000 { + compatible = "arm,rtsm,dcscb"; + reg = <0 0x60000000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + gic-cpuif@2 { + compatible = "arm,gic-cpuif"; + cpuif-id = <2>; + cpu = <&cpu2>; + }; + gic-cpuif@3 { + compatible = "arm,gic-cpuif"; + cpuif-id = <3>; + cpu = <&cpu3>; + }; + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu4>; + }; + gic-cpuif@5 { + compatible = "arm,gic-cpuif"; + cpuif-id = <5>; + cpu = <&cpu5>; + }; + gic-cpuif@6 { + compatible = "arm,gic-cpuif"; + cpuif-id = <6>; + cpu = <&cpu6>; + }; + gic-cpuif@7 { + compatible = "arm,gic-cpuif"; + cpuif-id = <7>; + cpu = <&cpu7>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + dcc { + compatible = "arm,vexpress,config-bus"; + arm,vexpress,config-bridge = <&v2m_sysreg>; + + osc@0 { + /* ACLK clock to the AXI master port on the test chip */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 0>; + freq-range = <30000000 50000000>; + #clock-cells = <0>; + clock-output-names = "extsaxiclk"; + }; + + oscclk1: osc@1 { + /* Reference clock for the CLCD */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 1>; + freq-range = <10000000 80000000>; + #clock-cells = <0>; + clock-output-names = "clcdclk"; + }; + + smbclk: oscclk2: osc@2 { + /* Reference clock for the test chip internal PLLs */ + compatible = "arm,vexpress-osc"; + arm,vexpress-sysreg,func = <1 2>; + freq-range = <33000000 100000000>; + #clock-cells = <0>; + clock-output-names = "tcrefclk"; + }; + }; + + smb { + compatible = "simple-bus"; + + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + + /include/ "rtsm_ve-motherboard.dtsi" + }; +}; + +/include/ "clcd-panels.dtsi" diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index ac870fb3fa0..9584232ee6b 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -228,6 +228,7 @@ }; clcd@1f0000 { + status = "disabled"; compatible = "arm,pl111", "arm,primecell"; reg = <0x1f0000 0x1000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index f1420368355..6593398c11a 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -227,6 +227,7 @@ }; clcd@1f000 { + status = "disabled"; compatible = "arm,pl111", "arm,primecell"; reg = <0x1f000 0x1000>; interrupts = <14>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 9420053acc1..cc6a8c0cfe3 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xbf000000 0x01000000; + / { model = "V2P-CA15"; arm,hbi = <0x237>; @@ -57,6 +59,8 @@ interrupts = <0 85 4>; clocks = <&oscclk5>; clock-names = "pxlclk"; + mode = "1024x768-16@60"; + framebuffer = <0 0xff000000 0 0x01000000>; }; memory-controller@2b0a0000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts index d2803be4e1a..f1dc620c5c4 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -9,11 +9,13 @@ /dts-v1/; +/memreserve/ 0xff000000 0x01000000; + / { model = "V2P-CA15_CA7"; arm,hbi = <0x249>; arm,vexpress,site = <0xf>; - compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; + compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress", "arm,generic"; interrupt-parent = <&gic>; #address-cells = <2>; #size-cells = <2>; @@ -29,44 +31,106 @@ i2c1 = &v2m_i2c_pcie; }; - cpus { + clusters { #address-cells = <1>; #size-cells = <0>; - cpu0: cpu@0 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; + cluster0: cluster@0 { reg = <0>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core0: core@0 { + reg = <0>; + }; + + core1: core@1 { + reg = <1>; + }; + + }; }; - cpu1: cpu@1 { - device_type = "cpu"; - compatible = "arm,cortex-a15"; + cluster1: cluster@1 { reg = <1>; + cores { + #address-cells = <1>; + #size-cells = <0>; + + core2: core@0 { + reg = <0>; + }; + + core3: core@1 { + reg = <1>; + }; + + core4: core@2 { + reg = <2>; + }; + }; }; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x100>; + cluster = <&cluster1>; + core = <&core2>; + clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; }; cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x101>; + cluster = <&cluster1>; + core = <&core3>; + clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; }; cpu4: cpu@4 { device_type = "cpu"; compatible = "arm,cortex-a7"; reg = <0x102>; + cluster = <&cluster1>; + core = <&core4>; + clock-frequency = <800000000>; + cci-control-port = <&cci_control2>; + }; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + cluster = <&cluster0>; + core = <&core0>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + cluster = <&cluster0>; + core = <&core1>; + clock-frequency = <1000000000>; + cci-control-port = <&cci_control1>; }; }; memory@80000000 { device_type = "memory"; - reg = <0 0x80000000 0 0x40000000>; + reg = <0 0x80000000 0 0x80000000>; }; wdt@2a490000 { @@ -81,6 +145,8 @@ compatible = "arm,hdlcd"; reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; + mode = "1024x768-16@60"; + framebuffer = <0 0xff000000 0 0x01000000>; clocks = <&oscclk5>; clock-names = "pxlclk"; }; @@ -102,6 +168,64 @@ <0 0x2c004000 0 0x2000>, <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; + + gic-cpuif@0 { + compatible = "arm,gic-cpuif"; + cpuif-id = <0>; + cpu = <&cpu0>; + }; + gic-cpuif@1 { + compatible = "arm,gic-cpuif"; + cpuif-id = <1>; + cpu = <&cpu1>; + }; + gic-cpuif@2 { + compatible = "arm,gic-cpuif"; + cpuif-id = <2>; + cpu = <&cpu2>; + }; + + gic-cpuif@3 { + compatible = "arm,gic-cpuif"; + cpuif-id = <3>; + cpu = <&cpu3>; + }; + + gic-cpuif@4 { + compatible = "arm,gic-cpuif"; + cpuif-id = <4>; + cpu = <&cpu4>; + }; + }; + + cci@2c090000 { + compatible = "arm,cci-400"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0 0x2c090000 0 0x1000>; + ranges = <0x0 0x0 0x2c090000 0x10000>; + + cci_control1: slave-if@4000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x4000 0x1000>; + }; + + cci_control2: slave-if@5000 { + compatible = "arm,cci-400-ctrl-if"; + interface-type = "ace"; + reg = <0x5000 0x1000>; + }; + }; + + cci-pmu@2c099000 { + compatible = "arm,cci-400-pmu"; + reg = <0 0x2c099000 0 0x6000>; + interrupts = <0 101 4>, + <0 102 4>, + <0 103 4>, + <0 104 4>, + <0 105 4>; }; memory-controller@7ffd0000 { @@ -125,6 +249,12 @@ clock-names = "apb_pclk"; }; + spc@7fff0000 { + compatible = "arm,vexpress-spc,v2p-ca15_a7","arm,vexpress-spc"; + reg = <0 0x7fff0000 0 0x1000>; + interrupts = <0 95 4>; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <1 13 0xf08>, @@ -133,12 +263,21 @@ <1 10 0xf08>; }; - pmu { + pmu_a15 { compatible = "arm,cortex-a15-pmu"; + cluster = <&cluster0>; interrupts = <0 68 4>, <0 69 4>; }; + pmu_a7 { + compatible = "arm,cortex-a7-pmu"; + cluster = <&cluster1>; + interrupts = <0 128 4>, + <0 129 4>, + <0 130 4>; + }; + oscclk6a: oscclk6a { /* Reference 24MHz clock */ compatible = "fixed-clock"; @@ -147,6 +286,15 @@ clock-output-names = "oscclk6a"; }; + psci { + compatible = "arm,psci"; + method = "smc"; + cpu_suspend = <0x80100001>; + cpu_off = <0x80100002>; + cpu_on = <0x80100003>; + migrate = <0x80100004>; + }; + dcc { compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts index c544a550459..cf633ed6a1b 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca5s.dts @@ -9,6 +9,8 @@ /dts-v1/; +/memreserve/ 0xbf000000 0x01000000; + / { model = "V2P-CA5s"; arm,hbi = <0x225>; @@ -59,6 +61,8 @@ interrupts = <0 85 4>; clocks = <&oscclk3>; clock-names = "pxlclk"; + mode = "640x480-16@60"; + framebuffer = <0xbf000000 0x01000000>; }; memory-controller@2a150000 { diff --git a/arch/arm/boot/dts/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/vexpress-v2p-ca9.dts index 62d9b225dcc..f83706bd3f9 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca9.dts @@ -9,6 +9,8 @@ /dts-v1/; +/include/ "clcd-panels.dtsi" + / { model = "V2P-CA9"; arm,hbi = <0x191>; @@ -73,6 +75,8 @@ interrupts = <0 44 4>; clocks = <&oscclk1>, <&oscclk2>; clock-names = "clcdclk", "apb_pclk"; + mode = "XVGA"; + use_dma = <1>; }; memory-controller@100e0000 { diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 48434cbe3e8..f27d6a7af57 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -16,3 +16,4 @@ obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o AFLAGS_mcpm_head.o := -march=armv7-a AFLAGS_vlock.o := -march=armv7-a +CFLAGS_REMOVE_mcpm_entry.o = -pg diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 7c1bfc0aea0..4928cdacedf 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -105,7 +105,7 @@ static inline void __cpuinit arch_counter_set_user_access(void) asm volatile("mrc p15, 0, %0, c14, c1, 0" : "=r" (cntkctl)); /* disable user access to everything */ - cntkctl &= ~((3 << 8) | (7 << 0)); + cntkctl &= ~((3 << 8) | (3 << 0)); asm volatile("mcr p15, 0, %0, c14, c1, 0" : : "r" (cntkctl)); } diff --git a/arch/arm/include/asm/cp15.h b/arch/arm/include/asm/cp15.h index 1f3262e99d8..cedd3721318 100644 --- a/arch/arm/include/asm/cp15.h +++ b/arch/arm/include/asm/cp15.h @@ -61,6 +61,20 @@ static inline void set_cr(unsigned int val) isb(); } +static inline unsigned int get_auxcr(void) +{ + unsigned int val; + asm("mrc p15, 0, %0, c1, c0, 1 @ get AUXCR" : "=r" (val)); + return val; +} + +static inline void set_auxcr(unsigned int val) +{ + asm volatile("mcr p15, 0, %0, c1, c0, 1 @ set AUXCR" + : : "r" (val)); + isb(); +} + #ifndef CONFIG_SMP extern void adjust_cr(unsigned long mask, unsigned long set); #endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 308ad7d6f98..75bf07910b8 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -8,6 +8,8 @@ * published by the Free Software Foundation. */ +#include <linux/types.h> + #ifndef __ASSEMBLY__ struct tag; @@ -16,8 +18,10 @@ struct pt_regs; struct smp_operations; #ifdef CONFIG_SMP #define smp_ops(ops) (&(ops)) +#define smp_init_ops(ops) (&(ops)) #else #define smp_ops(ops) (struct smp_operations *)NULL +#define smp_init_ops(ops) (bool (*)(void))NULL #endif struct machine_desc { @@ -41,6 +45,7 @@ struct machine_desc { unsigned char reserve_lp2 :1; /* never has lp2 */ char restart_mode; /* default restart mode */ struct smp_operations *smp; /* SMP operations */ + bool (*smp_init)(void); void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ diff --git a/arch/arm/include/asm/psci.h b/arch/arm/include/asm/psci.h index ce0dbe7c162..f0a8627c9f1 100644 --- a/arch/arm/include/asm/psci.h +++ b/arch/arm/include/asm/psci.h @@ -16,6 +16,10 @@ #define PSCI_POWER_STATE_TYPE_STANDBY 0 #define PSCI_POWER_STATE_TYPE_POWER_DOWN 1 +#define PSCI_POWER_STATE_AFFINITY_LEVEL0 0 +#define PSCI_POWER_STATE_AFFINITY_LEVEL1 1 +#define PSCI_POWER_STATE_AFFINITY_LEVEL2 2 +#define PSCI_POWER_STATE_AFFINITY_LEVEL3 3 struct psci_power_state { u16 id; @@ -32,5 +36,22 @@ struct psci_operations { }; extern struct psci_operations psci_ops; +extern struct smp_operations psci_smp_ops; +#ifdef CONFIG_ARM_PSCI +void psci_init(void); +bool psci_smp_available(void); +#else +static inline void psci_init(void) { } +static inline bool psci_smp_available(void) { return false; } +#endif + +#ifdef CONFIG_ARM_PSCI +extern int __init psci_probe(void); +#else +static inline int psci_probe(void) +{ + return -ENODEV; +} +#endif #endif /* __ASM_ARM_PSCI_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 5f3338eacad..dd9d90ab65d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -82,6 +82,9 @@ obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o -obj-$(CONFIG_ARM_PSCI) += psci.o +ifeq ($(CONFIG_ARM_PSCI),y) +obj-y += psci.o +obj-$(CONFIG_SMP) += psci_smp.o +endif extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/psci.c b/arch/arm/kernel/psci.c index 36531643cc2..0daf4f25228 100644 --- a/arch/arm/kernel/psci.c +++ b/arch/arm/kernel/psci.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/of.h> +#include <linux/string.h> #include <asm/compiler.h> #include <asm/errno.h> @@ -26,6 +27,11 @@ struct psci_operations psci_ops; +/* Type of psci support. Currently can only be enabled or disabled */ +#define PSCI_SUP_DISABLED 0 +#define PSCI_SUP_ENABLED 1 + +static unsigned int psci; static int (*invoke_psci_fn)(u32, u32, u32, u32); enum psci_function { @@ -42,6 +48,7 @@ static u32 psci_function_id[PSCI_FN_MAX]; #define PSCI_RET_EOPNOTSUPP -1 #define PSCI_RET_EINVAL -2 #define PSCI_RET_EPERM -3 +#define PSCI_RET_EALREADYON -4 static int psci_to_linux_errno(int errno) { @@ -54,6 +61,8 @@ static int psci_to_linux_errno(int errno) return -EINVAL; case PSCI_RET_EPERM: return -EPERM; + case PSCI_RET_EALREADYON: + return -EAGAIN; }; return -EINVAL; @@ -158,15 +167,18 @@ static const struct of_device_id psci_of_match[] __initconst = { {}, }; -static int __init psci_init(void) +void __init psci_init(void) { struct device_node *np; const char *method; u32 id; + if (psci == PSCI_SUP_DISABLED) + return; + np = of_find_matching_node(NULL, psci_of_match); if (!np) - return 0; + return; pr_info("probing function IDs from device-tree\n"); @@ -206,6 +218,35 @@ static int __init psci_init(void) out_put_node: of_node_put(np); - return 0; + return; +} + +int __init psci_probe(void) +{ + struct device_node *np; + int ret = -ENODEV; + + if (psci == PSCI_SUP_ENABLED) { + np = of_find_matching_node(NULL, psci_of_match); + if (np) + ret = 0; + } + + of_node_put(np); + return ret; +} + +static int __init early_psci(char *val) +{ + int ret = 0; + + if (strcmp(val, "enable") == 0) + psci = PSCI_SUP_ENABLED; + else if (strcmp(val, "disable") == 0) + psci = PSCI_SUP_DISABLED; + else + ret = -EINVAL; + + return ret; } -early_initcall(psci_init); +early_param("psci", early_psci); diff --git a/arch/arm/kernel/psci_smp.c b/arch/arm/kernel/psci_smp.c new file mode 100644 index 00000000000..23a11424c56 --- /dev/null +++ b/arch/arm/kernel/psci_smp.c @@ -0,0 +1,84 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon <will.deacon@arm.com> + */ + +#include <linux/init.h> +#include <linux/irqchip/arm-gic.h> +#include <linux/smp.h> +#include <linux/of.h> + +#include <asm/psci.h> +#include <asm/smp_plat.h> + +/* + * psci_smp assumes that the following is true about PSCI: + * + * cpu_suspend Suspend the execution on a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * cpu_off Power down a CPU + * @state we don't currently describe affinity levels, so just pass 0. + * no return on successful call + * + * cpu_on Power up a CPU + * @cpuid cpuid of target CPU, as from MPIDR + * @entry_point the first instruction to be executed on return + * returns 0 success, < 0 on failure + * + * migrate Migrate the context to a different CPU + * @cpuid cpuid of target CPU, as from MPIDR + * returns 0 success, < 0 on failure + * + */ + +extern void secondary_startup(void); + +static int __cpuinit psci_boot_secondary(unsigned int cpu, + struct task_struct *idle) +{ + if (psci_ops.cpu_on) + return psci_ops.cpu_on(cpu_logical_map(cpu), + __pa(secondary_startup)); + return -ENODEV; +} + +#ifdef CONFIG_HOTPLUG_CPU +void __ref psci_cpu_die(unsigned int cpu) +{ + const struct psci_power_state ps = { + .type = PSCI_POWER_STATE_TYPE_POWER_DOWN, + }; + + if (psci_ops.cpu_off) + psci_ops.cpu_off(ps); + + /* We should never return */ + panic("psci: cpu %d failed to shutdown\n", cpu); +} +#else +#define psci_cpu_die NULL +#endif + +bool __init psci_smp_available(void) +{ + /* is cpu_on available at least? */ + return (psci_ops.cpu_on != NULL); +} + +struct smp_operations __initdata psci_smp_ops = { + .smp_boot_secondary = psci_boot_secondary, + .cpu_die = psci_cpu_die, +}; diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index b4b1d397592..6002fe06b12 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -37,6 +37,7 @@ #include <asm/cputype.h> #include <asm/elf.h> #include <asm/procinfo.h> +#include <asm/psci.h> #include <asm/sections.h> #include <asm/setup.h> #include <asm/smp_plat.h> @@ -261,6 +262,19 @@ static int cpu_has_aliasing_icache(unsigned int arch) int aliasing_icache; unsigned int id_reg, num_sets, line_size; +#ifdef CONFIG_BIG_LITTLE + /* + * We expect a combination of Cortex-A15 and Cortex-A7 cores. + * A7 = VIPT aliasing I-cache + * A15 = PIPT (non-aliasing) I-cache + * To cater for this discrepancy, let's assume aliasing I-cache + * all the time. This means unneeded extra work on the A15 but + * only ptrace is affected which is not performance critical. + */ + if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc0f0) + return 1; +#endif + /* PIPT caches never alias. */ if (icache_is_pipt()) return 0; @@ -796,9 +810,15 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); arm_dt_init_cpu_maps(); + psci_init(); #ifdef CONFIG_SMP if (is_smp()) { - smp_set_ops(mdesc->smp); + if (!mdesc->smp_init || !mdesc->smp_init()) { + if (psci_smp_available()) + smp_set_ops(&psci_smp_ops); + else if (mdesc->smp) + smp_set_ops(mdesc->smp); + } smp_init_cpus(); } #endif diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 987dcf33415..b5c1e636ed8 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -4,6 +4,7 @@ #include <asm/assembler.h> #include <asm/glue-cache.h> #include <asm/glue-proc.h> +#include "entry-header.S" .text /* @@ -30,9 +31,8 @@ ENTRY(__cpu_suspend) mov r2, r5 @ virtual SP ldr r3, =sleep_save_sp #ifdef CONFIG_SMP - ALT_SMP(mrc p15, 0, lr, c0, c0, 5) - ALT_UP(mov lr, #0) - and lr, lr, #15 + get_thread_info r5 + ldr lr, [r5, #TI_CPU] @ cpu logical index add r3, r3, lr, lsl #2 #endif bl __cpu_suspend_save @@ -82,10 +82,13 @@ ENDPROC(cpu_resume_after_mmu) .align ENTRY(cpu_resume) #ifdef CONFIG_SMP + mov r1, #0 @ fall-back logical index for UP + ALT_SMP(mrc p15, 0, r0, c0, c0, 5) + ALT_UP_B(1f) + bic r0, #0xff000000 + bl cpu_logical_index @ return logical index in r1 +1: adr r0, sleep_save_sp - ALT_SMP(mrc p15, 0, r1, c0, c0, 5) - ALT_UP(mov r1, #0) - and r1, r1, #15 ldr r0, [r0, r1, lsl #2] @ stack phys addr #else ldr r0, sleep_save_sp @ stack phys addr @@ -102,3 +105,20 @@ sleep_save_sp: .rept CONFIG_NR_CPUS .long 0 @ preserve stack phys ptr here .endr + +#ifdef CONFIG_SMP +cpu_logical_index: + adr r3, cpu_map_ptr + ldr r2, [r3] + add r3, r3, r2 @ virt_to_phys(__cpu_logical_map) + mov r1, #0 +1: + ldr r2, [r3, r1, lsl #2] + cmp r2, r0 + moveq pc, lr + add r1, r1, #1 + b 1b + +cpu_map_ptr: + .long __cpu_logical_map - . +#endif diff --git a/arch/arm/mach-vexpress/Kconfig b/arch/arm/mach-vexpress/Kconfig index 5907e10c37f..dd3d5975a5c 100644 --- a/arch/arm/mach-vexpress/Kconfig +++ b/arch/arm/mach-vexpress/Kconfig @@ -1,5 +1,7 @@ config ARCH_VEXPRESS bool "ARM Ltd. Versatile Express family" if ARCH_MULTI_V7 + select ARCH_HAS_CPUFREQ + select ARCH_HAS_OPP select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_GIC @@ -56,5 +58,23 @@ config ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA config ARCH_VEXPRESS_CA9X4 bool "Versatile Express Cortex-A9x4 tile" + select ARM_ERRATA_643719 + +config ARCH_VEXPRESS_DCSCB + bool "Dual Cluster System Control Block (DCSCB) support" + depends on MCPM + select ARM_CCI + help + Support for the Dual Cluster System Configuration Block (DCSCB). + This is needed to provide CPU and cluster power management + on RTSM implementing big.LITTLE. + +config ARCH_VEXPRESS_TC2 + bool "TC2 cluster management" + depends on MCPM + select VEXPRESS_SPC + select ARM_CCI + help + Support for CPU and cluster power management on TC2. endmenu diff --git a/arch/arm/mach-vexpress/Makefile b/arch/arm/mach-vexpress/Makefile index 42703e8b4d3..14193dc7e6e 100644 --- a/arch/arm/mach-vexpress/Makefile +++ b/arch/arm/mach-vexpress/Makefile @@ -6,5 +6,13 @@ ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \ obj-y := v2m.o obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o +obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o +CFLAGS_REMOVE_dcscb.o = -pg +obj-$(CONFIG_ARCH_VEXPRESS_TC2) += tc2_pm.o tc2_pm_setup.o +CFLAGS_REMOVE_tc2_pm.o = -pg +ifeq ($(CONFIG_ARCH_VEXPRESS_TC2),y) +obj-$(CONFIG_ARM_PSCI) += tc2_pm_psci.o +CFLAGS_REMOVE_tc2_pm_psci.o = -pg +endif obj-$(CONFIG_SMP) += platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o diff --git a/arch/arm/mach-vexpress/core.h b/arch/arm/mach-vexpress/core.h index f134cd4a85f..bde4374ab6d 100644 --- a/arch/arm/mach-vexpress/core.h +++ b/arch/arm/mach-vexpress/core.h @@ -6,6 +6,8 @@ void vexpress_dt_smp_map_io(void); +bool vexpress_smp_init_ops(void); + extern struct smp_operations vexpress_smp_ops; extern void vexpress_cpu_die(unsigned int cpu); diff --git a/arch/arm/mach-vexpress/dcscb.c b/arch/arm/mach-vexpress/dcscb.c new file mode 100644 index 00000000000..948aec0890f --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb.c @@ -0,0 +1,260 @@ +/* + * arch/arm/mach-vexpress/dcscb.c - Dual Cluster System Configuration Block + * + * Created by: Nicolas Pitre, May 2012 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/io.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/of_address.h> +#include <linux/vexpress.h> +#include <linux/arm-cci.h> + +#include <asm/mcpm.h> +#include <asm/proc-fns.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/psci.h> + + +#define RST_HOLD0 0x0 +#define RST_HOLD1 0x4 +#define SYS_SWRESET 0x8 +#define RST_STAT0 0xc +#define RST_STAT1 0x10 +#define EAG_CFG_R 0x20 +#define EAG_CFG_W 0x24 +#define KFC_CFG_R 0x28 +#define KFC_CFG_W 0x2c +#define DCS_CFG_R 0x30 + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() while its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t dcscb_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static void __iomem *dcscb_base; +static int dcscb_use_count[4][2]; +static int dcscb_allcpus_mask[2]; + +static int dcscb_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int rst_hold, cpumask = (1 << cpu); + unsigned int all_mask = dcscb_allcpus_mask[cluster]; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cpu >= 4 || cluster >= 2) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&dcscb_lock); + + dcscb_use_count[cpu][cluster]++; + if (dcscb_use_count[cpu][cluster] == 1) { + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + if (rst_hold & (1 << 8)) { + /* remove cluster reset and add individual CPU's reset */ + rst_hold &= ~(1 << 8); + rst_hold |= all_mask; + } + rst_hold &= ~(cpumask | (cpumask << 4)); + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + } else if (dcscb_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&dcscb_lock); + local_irq_enable(); + + return 0; +} + +static void dcscb_power_down(void) +{ + unsigned int mpidr, cpu, cluster, rst_hold, cpumask, all_mask; + bool last_man = false, skip_wfi = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + cpumask = (1 << cpu); + all_mask = dcscb_allcpus_mask[cluster]; + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= 4 || cluster >= 2); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&dcscb_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + dcscb_use_count[cpu][cluster]--; + if (dcscb_use_count[cpu][cluster] == 0) { + rst_hold = readl_relaxed(dcscb_base + RST_HOLD0 + cluster * 4); + rst_hold |= cpumask; + if (((rst_hold | (rst_hold >> 4)) & all_mask) == all_mask) { + rst_hold |= (1 << 8); + last_man = true; + } + writel_relaxed(rst_hold, dcscb_base + RST_HOLD0 + cluster * 4); + } else if (dcscb_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else + BUG(); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush all cache levels for this cluster. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (to be investigated). + */ + flush_cache_all(); + set_cr(get_cr() & ~CR_C); + flush_cache_all(); + + /* + * This is a harmless no-op. On platforms with a real + * outer cache this might either be needed or not, + * depending on where the outer cache sits. + */ + outer_flush_all(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + + /* + * Disable cluster-level coherency by masking + * incoming snoops and DVM messages: + */ + cci_disable_port_by_cpu(mpidr); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + arch_spin_unlock(&dcscb_lock); + + /* + * Flush the local CPU cache. + * + * A15/A7 can hit in the cache with SCTLR.C=0, so we don't need + * a preliminary flush here for those CPUs. At least, that's + * the theory -- without the extra flush, Linux explodes on + * RTSM (to be investigated). + */ + flush_cache_louis(); + set_cr(get_cr() & ~CR_C); + flush_cache_louis(); + + /* Disable local coherency by clearing the ACTLR "SMP" bit: */ + set_auxcr(get_auxcr() & ~(1 << 6)); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + dsb(); + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static const struct mcpm_platform_ops dcscb_power_ops = { + .power_up = dcscb_power_up, + .power_down = dcscb_power_down, +}; + +static void __init dcscb_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cpu >= 4 || cluster >= 2); + dcscb_use_count[cpu][cluster] = 1; +} + +extern void dcscb_power_up_setup(unsigned int affinity_level); + +static int __init dcscb_init(void) +{ + struct device_node *node; + unsigned int cfg; + int ret; + + ret = psci_probe(); + if (!ret) { + pr_debug("psci found. Aborting native init\n"); + return -ENODEV; + } + + if (!cci_probed()) + return -ENODEV; + + node = of_find_compatible_node(NULL, NULL, "arm,rtsm,dcscb"); + if (!node) + return -ENODEV; + dcscb_base = of_iomap(node, 0); + if (!dcscb_base) + return -EADDRNOTAVAIL; + cfg = readl_relaxed(dcscb_base + DCS_CFG_R); + dcscb_allcpus_mask[0] = (1 << (((cfg >> 16) >> (0 << 2)) & 0xf)) - 1; + dcscb_allcpus_mask[1] = (1 << (((cfg >> 16) >> (1 << 2)) & 0xf)) - 1; + dcscb_usage_count_init(); + + ret = mcpm_platform_register(&dcscb_power_ops); + if (!ret) + ret = mcpm_sync_init(dcscb_power_up_setup); + if (ret) { + iounmap(dcscb_base); + return ret; + } + + pr_info("VExpress DCSCB support installed\n"); + + /* + * Future entries into the kernel can now go + * through the cluster entry vectors. + */ + vexpress_flags_set(virt_to_phys(mcpm_entry_point)); + + return 0; +} + +early_initcall(dcscb_init); diff --git a/arch/arm/mach-vexpress/dcscb_setup.S b/arch/arm/mach-vexpress/dcscb_setup.S new file mode 100644 index 00000000000..4bb7fbe0f62 --- /dev/null +++ b/arch/arm/mach-vexpress/dcscb_setup.S @@ -0,0 +1,38 @@ +/* + * arch/arm/include/asm/dcscb_setup.S + * + * Created by: Dave Martin, 2012-06-22 + * Copyright: (C) 2012-2013 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/linkage.h> + + +ENTRY(dcscb_power_up_setup) + + cmp r0, #0 @ check affinity level + beq 2f + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + * The ACTLR SMP bit does not need to be set here, because cpu_resume() + * already restores that. + * + * A15/A7 may not require explicit L2 invalidation on reset, dependent + * on hardware integration decisions. + * For now, this code assumes that L2 is either already invalidated, + * or invalidation is not required. + */ + + b cci_enable_port_for_self + +2: @ Implementation-specific local CPU setup operations should go here, + @ if any. In this case, there is nothing to do. + + bx lr + +ENDPROC(dcscb_power_up_setup) diff --git a/arch/arm/mach-vexpress/include/mach/tc2.h b/arch/arm/mach-vexpress/include/mach/tc2.h new file mode 100644 index 00000000000..d3b5a2225a0 --- /dev/null +++ b/arch/arm/mach-vexpress/include/mach/tc2.h @@ -0,0 +1,10 @@ +#ifndef __MACH_TC2_H +#define __MACH_TC2_H + +/* + * cpu and cluster limits + */ +#define TC2_MAX_CPUS 3 +#define TC2_MAX_CLUSTERS 2 + +#endif diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index dc1ace55d55..993c9ae5dc5 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -12,9 +12,11 @@ #include <linux/errno.h> #include <linux/smp.h> #include <linux/io.h> +#include <linux/of.h> #include <linux/of_fdt.h> #include <linux/vexpress.h> +#include <asm/mcpm.h> #include <asm/smp_scu.h> #include <asm/mach/map.h> @@ -203,3 +205,21 @@ struct smp_operations __initdata vexpress_smp_ops = { .cpu_die = vexpress_cpu_die, #endif }; + +bool __init vexpress_smp_init_ops(void) +{ +#ifdef CONFIG_MCPM + /* + * The best way to detect a multi-cluster configuration at the moment + * is to look for the presence of a CCI in the system. + * Override the default vexpress_smp_ops if so. + */ + struct device_node *node; + node = of_find_compatible_node(NULL, NULL, "arm,cci-400"); + if (node && of_device_is_available(node)) { + mcpm_smp_set_ops(); + return true; + } +#endif + return false; +} diff --git a/arch/arm/mach-vexpress/tc2_pm.c b/arch/arm/mach-vexpress/tc2_pm.c new file mode 100644 index 00000000000..9c742edb7ae --- /dev/null +++ b/arch/arm/mach-vexpress/tc2_pm.c @@ -0,0 +1,271 @@ +/* + * arch/arm/mach-vexpress/tc2_pm.c - TC2 power management support + * + * Created by: Nicolas Pitre, October 2012 + * Copyright: (C) 2012 Linaro Limited + * + * Some portions of this file were originally written by Achin Gupta + * Copyright: (C) 2012 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/irqchip/arm-gic.h> + +#include <asm/mcpm.h> +#include <asm/proc-fns.h> +#include <asm/cacheflush.h> +#include <asm/cputype.h> +#include <asm/cp15.h> +#include <asm/psci.h> + +#include <mach/motherboard.h> +#include <mach/tc2.h> + +#include <linux/vexpress.h> +#include <linux/arm-cci.h> + +/* + * We can't use regular spinlocks. In the switcher case, it is possible + * for an outbound CPU to call power_down() after its inbound counterpart + * is already live using the same logical CPU number which trips lockdep + * debugging. + */ +static arch_spinlock_t tc2_pm_lock = __ARCH_SPIN_LOCK_UNLOCKED; + +static int tc2_pm_use_count[TC2_MAX_CPUS][TC2_MAX_CLUSTERS]; + +static int tc2_pm_power_up(unsigned int cpu, unsigned int cluster) +{ + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + if (cluster >= TC2_MAX_CLUSTERS || + cpu >= vexpress_spc_get_nb_cpus(cluster)) + return -EINVAL; + + /* + * Since this is called with IRQs enabled, and no arch_spin_lock_irq + * variant exists, we need to disable IRQs manually here. + */ + local_irq_disable(); + arch_spin_lock(&tc2_pm_lock); + + if (!tc2_pm_use_count[0][cluster] && + !tc2_pm_use_count[1][cluster] && + !tc2_pm_use_count[2][cluster]) + vexpress_spc_powerdown_enable(cluster, 0); + + tc2_pm_use_count[cpu][cluster]++; + if (tc2_pm_use_count[cpu][cluster] == 1) { + vexpress_spc_write_resume_reg(cluster, cpu, + virt_to_phys(mcpm_entry_point)); + vexpress_spc_set_cpu_wakeup_irq(cpu, cluster, 1); + } else if (tc2_pm_use_count[cpu][cluster] != 2) { + /* + * The only possible values are: + * 0 = CPU down + * 1 = CPU (still) up + * 2 = CPU requested to be up before it had a chance + * to actually make itself down. + * Any other value is a bug. + */ + BUG(); + } + + arch_spin_unlock(&tc2_pm_lock); + local_irq_enable(); + + return 0; +} + +static void tc2_pm_down(u64 residency) +{ + unsigned int mpidr, cpu, cluster; + bool last_man = false, skip_wfi = false; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_MAX_CLUSTERS || + cpu >= vexpress_spc_get_nb_cpus(cluster)); + + __mcpm_cpu_going_down(cpu, cluster); + + arch_spin_lock(&tc2_pm_lock); + BUG_ON(__mcpm_cluster_state(cluster) != CLUSTER_UP); + tc2_pm_use_count[cpu][cluster]--; + if (tc2_pm_use_count[cpu][cluster] == 0) { + vexpress_spc_set_cpu_wakeup_irq(cpu, cluster, 1); + if (!tc2_pm_use_count[0][cluster] && + !tc2_pm_use_count[1][cluster] && + !tc2_pm_use_count[2][cluster] && + (!residency || residency > 5000)) { + vexpress_spc_powerdown_enable(cluster, 1); + vexpress_spc_set_global_wakeup_intr(1); + last_man = true; + } + } else if (tc2_pm_use_count[cpu][cluster] == 1) { + /* + * A power_up request went ahead of us. + * Even if we do not want to shut this CPU down, + * the caller expects a certain state as if the WFI + * was aborted. So let's continue with cache cleaning. + */ + skip_wfi = true; + } else + BUG(); + + gic_cpu_if_down(); + + if (last_man && __mcpm_outbound_enter_critical(cpu, cluster)) { + arch_spin_unlock(&tc2_pm_lock); + + set_cr(get_cr() & ~CR_C); + flush_cache_all(); + asm volatile ("clrex"); + set_auxcr(get_auxcr() & ~(1 << 6)); + + cci_disable_port_by_cpu(mpidr); + + /* + * Ensure that both C & I bits are disabled in the SCTLR + * before disabling ACE snoops. This ensures that no + * coherency traffic will originate from this cpu after + * ACE snoops are turned off. + */ + cpu_proc_fin(); + + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + } else { + /* + * If last man then undo any setup done previously. + */ + if (last_man) { + vexpress_spc_powerdown_enable(cluster, 0); + vexpress_spc_set_global_wakeup_intr(0); + } + + arch_spin_unlock(&tc2_pm_lock); + + set_cr(get_cr() & ~CR_C); + flush_cache_louis(); + asm volatile ("clrex"); + set_auxcr(get_auxcr() & ~(1 << 6)); + } + + __mcpm_cpu_down(cpu, cluster); + + /* Now we are prepared for power-down, do it: */ + if (!skip_wfi) + wfi(); + + /* Not dead at this point? Let our caller cope. */ +} + +static void tc2_pm_power_down(void) +{ + tc2_pm_down(0); +} + +static void tc2_pm_suspend(u64 residency) +{ + extern void tc2_resume(void); + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + vexpress_spc_write_resume_reg(cluster, cpu, + virt_to_phys(tc2_resume)); + + tc2_pm_down(residency); +} + +static void tc2_pm_powered_up(void) +{ + unsigned int mpidr, cpu, cluster; + unsigned long flags; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_MAX_CLUSTERS || + cpu >= vexpress_spc_get_nb_cpus(cluster)); + + local_irq_save(flags); + arch_spin_lock(&tc2_pm_lock); + + if (!tc2_pm_use_count[0][cluster] && + !tc2_pm_use_count[1][cluster] && + !tc2_pm_use_count[2][cluster]) { + vexpress_spc_powerdown_enable(cluster, 0); + vexpress_spc_set_global_wakeup_intr(0); + } + + if (!tc2_pm_use_count[cpu][cluster]) + tc2_pm_use_count[cpu][cluster] = 1; + + vexpress_spc_set_cpu_wakeup_irq(cpu, cluster, 0); + vexpress_spc_write_resume_reg(cluster, cpu, 0); + + arch_spin_unlock(&tc2_pm_lock); + local_irq_restore(flags); +} + +static const struct mcpm_platform_ops tc2_pm_power_ops = { + .power_up = tc2_pm_power_up, + .power_down = tc2_pm_power_down, + .suspend = tc2_pm_suspend, + .powered_up = tc2_pm_powered_up, +}; + +static void __init tc2_pm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_MAX_CLUSTERS || + cpu >= vexpress_spc_get_nb_cpus(cluster)); + + tc2_pm_use_count[cpu][cluster] = 1; +} + +extern void tc2_pm_power_up_setup(unsigned int affinity_level); + +static int __init tc2_pm_init(void) +{ + int ret; + + ret = psci_probe(); + if (!ret) { + pr_debug("psci found. Aborting native init\n"); + return -ENODEV; + } + + if (!vexpress_spc_check_loaded()) + return -ENODEV; + + tc2_pm_usage_count_init(); + + ret = mcpm_platform_register(&tc2_pm_power_ops); + if (!ret) + ret = mcpm_sync_init(tc2_pm_power_up_setup); + if (!ret) + pr_info("TC2 power management initialized\n"); + return ret; +} + +early_initcall(tc2_pm_init); diff --git a/arch/arm/mach-vexpress/tc2_pm_psci.c b/arch/arm/mach-vexpress/tc2_pm_psci.c new file mode 100644 index 00000000000..c2fdc22e4c0 --- /dev/null +++ b/arch/arm/mach-vexpress/tc2_pm_psci.c @@ -0,0 +1,173 @@ +/* + * arch/arm/mach-vexpress/tc2_pm_psci.c - TC2 PSCI support + * + * Created by: Achin Gupta, December 2012 + * Copyright: (C) 2012 ARM Limited + * + * Some portions of this file were originally written by Nicolas Pitre + * Copyright: (C) 2012 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/spinlock.h> +#include <linux/errno.h> + +#include <asm/mcpm.h> +#include <asm/proc-fns.h> +#include <asm/cacheflush.h> +#include <asm/psci.h> +#include <asm/atomic.h> +#include <asm/cputype.h> +#include <asm/cp15.h> + +#include <mach/motherboard.h> +#include <mach/tc2.h> + +#include <linux/vexpress.h> + +/* + * Platform specific state id understood by the firmware and used to + * program the power controller + */ +#define PSCI_POWER_STATE_ID 0 + +static atomic_t tc2_pm_use_count[TC2_MAX_CPUS][TC2_MAX_CLUSTERS]; + +static int tc2_pm_psci_power_up(unsigned int cpu, unsigned int cluster) +{ + unsigned int mpidr = (cluster << 8) | cpu; + int ret = 0; + + BUG_ON(!psci_ops.cpu_on); + + switch (atomic_inc_return(&tc2_pm_use_count[cpu][cluster])) { + case 1: + /* + * This is a request to power up a cpu that linux thinks has + * been powered down. Retries are needed if the firmware has + * seen the power down request as yet. + */ + do + ret = psci_ops.cpu_on(mpidr, + virt_to_phys(mcpm_entry_point)); + while (ret == -EAGAIN); + + return ret; + case 2: + /* This power up request has overtaken a power down request */ + return ret; + default: + /* Any other value is a bug */ + BUG(); + } +} + +static void tc2_pm_psci_power_down(void) +{ + struct psci_power_state power_state; + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + BUG_ON(!psci_ops.cpu_off); + + switch (atomic_dec_return(&tc2_pm_use_count[cpu][cluster])) { + case 1: + /* + * Overtaken by a power up. Flush caches, exit coherency, + * return & fake a reset + */ + set_cr(get_cr() & ~CR_C); + + flush_cache_louis(); + + asm volatile ("clrex"); + set_auxcr(get_auxcr() & ~(1 << 6)); + + return; + case 0: + /* A normal request to possibly power down the cluster */ + power_state.id = PSCI_POWER_STATE_ID; + power_state.type = PSCI_POWER_STATE_TYPE_POWER_DOWN; + power_state.affinity_level = PSCI_POWER_STATE_AFFINITY_LEVEL1; + + psci_ops.cpu_off(power_state); + + /* On success this function never returns */ + default: + /* Any other value is a bug */ + BUG(); + } +} + +static void tc2_pm_psci_suspend(u64 unused) +{ + struct psci_power_state power_state; + + BUG_ON(!psci_ops.cpu_suspend); + + /* On TC2 always attempt to power down the cluster */ + power_state.id = PSCI_POWER_STATE_ID; + power_state.type = PSCI_POWER_STATE_TYPE_POWER_DOWN; + power_state.affinity_level = PSCI_POWER_STATE_AFFINITY_LEVEL1; + + psci_ops.cpu_suspend(power_state, virt_to_phys(mcpm_entry_point)); + + /* On success this function never returns */ + BUG(); +} + +static const struct mcpm_platform_ops tc2_pm_power_ops = { + .power_up = tc2_pm_psci_power_up, + .power_down = tc2_pm_psci_power_down, + .suspend = tc2_pm_psci_suspend, +}; + +static void __init tc2_pm_usage_count_init(void) +{ + unsigned int mpidr, cpu, cluster; + + mpidr = read_cpuid_mpidr(); + cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + + pr_debug("%s: cpu %u cluster %u\n", __func__, cpu, cluster); + BUG_ON(cluster >= TC2_MAX_CLUSTERS || + cpu >= vexpress_spc_get_nb_cpus(cluster)); + + atomic_set(&tc2_pm_use_count[cpu][cluster], 1); +} + +static int __init tc2_pm_psci_init(void) +{ + int ret; + + ret = psci_probe(); + if (ret) { + pr_debug("psci not found. Aborting psci init\n"); + return -ENODEV; + } + + if (!vexpress_spc_check_loaded()) { + pr_debug("spc not found. Aborting psci init\n"); + return -ENODEV; + } + + tc2_pm_usage_count_init(); + + ret = mcpm_platform_register(&tc2_pm_power_ops); + if (!ret) + ret = mcpm_sync_init(NULL); + if (!ret) + pr_info("TC2 power management initialized\n"); + return ret; +} + +early_initcall(tc2_pm_psci_init); diff --git a/arch/arm/mach-vexpress/tc2_pm_setup.S b/arch/arm/mach-vexpress/tc2_pm_setup.S new file mode 100644 index 00000000000..a18dafeeb0e --- /dev/null +++ b/arch/arm/mach-vexpress/tc2_pm_setup.S @@ -0,0 +1,68 @@ +/* + * arch/arm/include/asm/tc2_pm_setup.S + * + * Created by: Nicolas Pitre, October 2012 + ( (based on dcscb_setup.S by Dave Martin) + * Copyright: (C) 2012 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include <linux/linkage.h> +#include <asm/mcpm.h> + + +#define SPC_PHYS_BASE 0x7FFF0000 +#define SPC_WAKE_INT_STAT 0xb2c + +#define SNOOP_CTL_A15 0x404 +#define SNOOP_CTL_A7 0x504 + +#define A15_SNOOP_MASK (0x3 << 7) +#define A7_SNOOP_MASK (0x1 << 13) + +#define A15_BX_ADDR0 0xB68 + + +ENTRY(tc2_resume) + mrc p15, 0, r0, c0, c0, 5 + ubfx r1, r0, #0, #4 @ r1 = cpu + ubfx r2, r0, #8, #4 @ r2 = cluster + add r1, r1, r2, lsl #2 @ r1 = index of CPU in WAKE_INT_STAT + ldr r3, =SPC_PHYS_BASE + SPC_WAKE_INT_STAT + ldr r3, [r3] + lsr r3, r1 + tst r3, #1 + wfieq @ if no pending IRQ reenters wfi + b mcpm_entry_point +ENDPROC(tc2_resume) + +/* + * Enable cluster-level coherency, in preparation for turning on the MMU. + * The ACTLR SMP bit does not need to be set here, because cpu_resume() + * already restores that. + */ + +ENTRY(tc2_pm_power_up_setup) + + cmp r0, #0 + beq 2f + + b cci_enable_port_for_self + +2: @ Clear the BX addr register + ldr r3, =SPC_PHYS_BASE + A15_BX_ADDR0 + mrc p15, 0, r0, c0, c0, 5 @ MPIDR + ubfx r1, r0, #8, #4 @ cluster + ubfx r0, r0, #0, #4 @ cpu + add r3, r3, r1, lsl #4 + mov r1, #0 + str r1, [r3, r0, lsl #2] + dsb + + bx lr + +ENDPROC(tc2_pm_power_up_setup) diff --git a/arch/arm/mach-vexpress/v2m.c b/arch/arm/mach-vexpress/v2m.c index 8802030df98..057f99b62ea 100644 --- a/arch/arm/mach-vexpress/v2m.c +++ b/arch/arm/mach-vexpress/v2m.c @@ -10,6 +10,7 @@ #include <linux/smp.h> #include <linux/init.h> #include <linux/irqchip.h> +#include <linux/memblock.h> #include <linux/of_address.h> #include <linux/of_fdt.h> #include <linux/of_irq.h> @@ -373,6 +374,31 @@ MACHINE_START(VEXPRESS, "ARM-Versatile Express") .init_machine = v2m_init, MACHINE_END +static void __init v2m_dt_hdlcd_init(void) +{ + struct device_node *node; + int len, na, ns; + const __be32 *prop; + phys_addr_t fb_base, fb_size; + + node = of_find_compatible_node(NULL, NULL, "arm,hdlcd"); + if (!node) + return; + + na = of_n_addr_cells(node); + ns = of_n_size_cells(node); + + prop = of_get_property(node, "framebuffer", &len); + if (WARN_ON(!prop || len < (na + ns) * sizeof(*prop))) + return; + + fb_base = of_read_number(prop, na); + fb_size = of_read_number(prop + na, ns); + + if (WARN_ON(memblock_remove(fb_base, fb_size))) + return; +}; + static struct map_desc v2m_rs1_io_desc __initdata = { .virtual = V2M_PERIPH, .pfn = __phys_to_pfn(0x1c000000), @@ -423,6 +449,8 @@ void __init v2m_dt_init_early(void) pr_warning("vexpress: DT HBI (%x) is not matching " "hardware (%x)!\n", dt_hbi, hbi); } + + v2m_dt_hdlcd_init(); } static void __init v2m_dt_timer_init(void) @@ -456,6 +484,7 @@ static const char * const v2m_dt_match[] __initconst = { DT_MACHINE_START(VEXPRESS_DT, "ARM-Versatile Express") .dt_compat = v2m_dt_match, .smp = smp_ops(vexpress_smp_ops), + .smp_init = smp_init_ops(vexpress_smp_init_ops), .map_io = v2m_dt_map_io, .init_early = v2m_dt_init_early, .init_irq = irqchip_init, diff --git a/arch/arm/mach-virt/Makefile b/arch/arm/mach-virt/Makefile index 042afc1f8c4..7ddbfa60227 100644 --- a/arch/arm/mach-virt/Makefile +++ b/arch/arm/mach-virt/Makefile @@ -3,4 +3,3 @@ # obj-y := virt.o -obj-$(CONFIG_SMP) += platsmp.o diff --git a/arch/arm/mach-virt/platsmp.c b/arch/arm/mach-virt/platsmp.c deleted file mode 100644 index f4143f5bfa5..00000000000 --- a/arch/arm/mach-virt/platsmp.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * Dummy Virtual Machine - does what it says on the tin. - * - * Copyright (C) 2012 ARM Ltd - * Author: Will Deacon <will.deacon@arm.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program. If not, see <http://www.gnu.org/licenses/>. - */ - -#include <linux/init.h> -#include <linux/smp.h> -#include <linux/of.h> - -#include <asm/psci.h> -#include <asm/smp_plat.h> - -extern void secondary_startup(void); - -static void __init virt_smp_init_cpus(void) -{ -} - -static void __init virt_smp_prepare_cpus(unsigned int max_cpus) -{ -} - -static int __cpuinit virt_boot_secondary(unsigned int cpu, - struct task_struct *idle) -{ - if (psci_ops.cpu_on) - return psci_ops.cpu_on(cpu_logical_map(cpu), - __pa(secondary_startup)); - return -ENODEV; -} - -struct smp_operations __initdata virt_smp_ops = { - .smp_init_cpus = virt_smp_init_cpus, - .smp_prepare_cpus = virt_smp_prepare_cpus, - .smp_boot_secondary = virt_boot_secondary, -}; diff --git a/arch/arm/mach-virt/virt.c b/arch/arm/mach-virt/virt.c index 061f283f579..a67d2dd5bb6 100644 --- a/arch/arm/mach-virt/virt.c +++ b/arch/arm/mach-virt/virt.c @@ -36,11 +36,8 @@ static const char *virt_dt_match[] = { NULL }; -extern struct smp_operations virt_smp_ops; - DT_MACHINE_START(VIRT, "Dummy Virtual Machine") .init_irq = irqchip_init, .init_machine = virt_init, - .smp = smp_ops(virt_smp_ops), .dt_compat = virt_dt_match, MACHINE_END diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c index 5dbf13f954f..e207aa5f846 100644 --- a/arch/arm/mm/fault.c +++ b/arch/arm/mm/fault.c @@ -446,8 +446,16 @@ do_translation_fault(unsigned long addr, unsigned int fsr, if (pud_none(*pud_k)) goto bad_area; - if (!pud_present(*pud)) + if (!pud_present(*pud)) { set_pud(pud, *pud_k); + /* + * There is a small window during free_pgtables() where the + * user *pud entry is 0 but the TLB has not been invalidated + * and we get a level 2 (pmd) translation fault caused by the + * intermediate TLB caching of the old level 1 (pud) entry. + */ + flush_tlb_kernel_page(addr); + } pmd = pmd_offset(pud, addr); pmd_k = pmd_offset(pud_k, addr); @@ -470,8 +478,9 @@ do_translation_fault(unsigned long addr, unsigned int fsr, #endif if (pmd_none(pmd_k[index])) goto bad_area; + if (!pmd_present(pmd[index])) + copy_pmd(pmd, pmd_k); - copy_pmd(pmd, pmd_k); return 0; bad_area: diff --git a/arch/arm/plat-versatile/headsmp.S b/arch/arm/plat-versatile/headsmp.S index b178d44e9ea..2677bc3762d 100644 --- a/arch/arm/plat-versatile/headsmp.S +++ b/arch/arm/plat-versatile/headsmp.S @@ -11,8 +11,6 @@ #include <linux/linkage.h> #include <linux/init.h> - __INIT - /* * Realview/Versatile Express specific entry point for secondary CPUs. * This provides a "holding pen" into which all secondary cores are held |