diff options
Diffstat (limited to 'arch/powerpc/oprofile/op_model_7450.c')
| -rw-r--r-- | arch/powerpc/oprofile/op_model_7450.c | 206 |
1 files changed, 206 insertions, 0 deletions
diff --git a/arch/powerpc/oprofile/op_model_7450.c b/arch/powerpc/oprofile/op_model_7450.c new file mode 100644 index 00000000000..32abfdbb0eb --- /dev/null +++ b/arch/powerpc/oprofile/op_model_7450.c @@ -0,0 +1,206 @@ +/* + * oprofile/op_model_7450.c + * + * Freescale 745x/744x oprofile support, based on fsl_booke support + * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM + * + * Copyright (c) 2004 Freescale Semiconductor, Inc + * + * Author: Andy Fleming + * Maintainer: Kumar Gala <galak@kernel.crashing.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/oprofile.h> +#include <linux/init.h> +#include <linux/smp.h> +#include <asm/ptrace.h> +#include <asm/system.h> +#include <asm/processor.h> +#include <asm/cputable.h> +#include <asm/page.h> +#include <asm/pmc.h> +#include <asm/oprofile_impl.h> + +static unsigned long reset_value[OP_MAX_COUNTER]; + +static int oprofile_running; +static u32 mmcr0_val, mmcr1_val, mmcr2_val; + +#define MMCR0_PMC1_SHIFT 6 +#define MMCR0_PMC2_SHIFT 0 +#define MMCR1_PMC3_SHIFT 27 +#define MMCR1_PMC4_SHIFT 22 +#define MMCR1_PMC5_SHIFT 17 +#define MMCR1_PMC6_SHIFT 11 + +#define mmcr0_event1(event) \ + ((event << MMCR0_PMC1_SHIFT) & MMCR0_PMC1SEL) +#define mmcr0_event2(event) \ + ((event << MMCR0_PMC2_SHIFT) & MMCR0_PMC2SEL) + +#define mmcr1_event3(event) \ + ((event << MMCR1_PMC3_SHIFT) & MMCR1_PMC3SEL) +#define mmcr1_event4(event) \ + ((event << MMCR1_PMC4_SHIFT) & MMCR1_PMC4SEL) +#define mmcr1_event5(event) \ + ((event << MMCR1_PMC5_SHIFT) & MMCR1_PMC5SEL) +#define mmcr1_event6(event) \ + ((event << MMCR1_PMC6_SHIFT) & MMCR1_PMC6SEL) + +#define MMCR0_INIT (MMCR0_FC | MMCR0_FCS | MMCR0_FCP | MMCR0_FCM1 | MMCR0_FCM0) + +/* Unfreezes the counters on this CPU, enables the interrupt, + * enables the counters to trigger the interrupt, and sets the + * counters to only count when the mark bit is not set. + */ +static void pmc_start_ctrs(void) +{ + u32 mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 &= ~(MMCR0_FC | MMCR0_FCM0); + mmcr0 |= (MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); + + mtspr(SPRN_MMCR0, mmcr0); +} + +/* Disables the counters on this CPU, and freezes them */ +static void pmc_stop_ctrs(void) +{ + u32 mmcr0 = mfspr(SPRN_MMCR0); + + mmcr0 |= MMCR0_FC; + mmcr0 &= ~(MMCR0_FCECE | MMCR0_PMC1CE | MMCR0_PMCnCE | MMCR0_PMXE); + + mtspr(SPRN_MMCR0, mmcr0); +} + +/* Configures the counters on this CPU based on the global + * settings */ +static void fsl7450_cpu_setup(void *unused) +{ + /* freeze all counters */ + pmc_stop_ctrs(); + + mtspr(SPRN_MMCR0, mmcr0_val); + mtspr(SPRN_MMCR1, mmcr1_val); + mtspr(SPRN_MMCR2, mmcr2_val); +} + +#define NUM_CTRS 6 + +/* Configures the global settings for the countes on all CPUs. */ +static void fsl7450_reg_setup(struct op_counter_config *ctr, + struct op_system_config *sys, + int num_ctrs) +{ + int i; + + /* Our counters count up, and "count" refers to + * how much before the next interrupt, and we interrupt + * on overflow. So we calculate the starting value + * which will give us "count" until overflow. + * Then we set the events on the enabled counters */ + for (i = 0; i < NUM_CTRS; ++i) + reset_value[i] = 0x80000000UL - ctr[i].count; + + /* Set events for Counters 1 & 2 */ + mmcr0_val = MMCR0_INIT | mmcr0_event1(ctr[0].event) + | mmcr0_event2(ctr[1].event); + + /* Setup user/kernel bits */ + if (sys->enable_kernel) + mmcr0_val &= ~(MMCR0_FCS); + + if (sys->enable_user) + mmcr0_val &= ~(MMCR0_FCP); + + /* Set events for Counters 3-6 */ + mmcr1_val = mmcr1_event3(ctr[2].event) + | mmcr1_event4(ctr[3].event) + | mmcr1_event5(ctr[4].event) + | mmcr1_event6(ctr[5].event); + + mmcr2_val = 0; +} + +/* Sets the counters on this CPU to the chosen values, and starts them */ +static void fsl7450_start(struct op_counter_config *ctr) +{ + int i; + + mtmsr(mfmsr() | MSR_PMM); + + for (i = 0; i < NUM_CTRS; ++i) { + if (ctr[i].enabled) + ctr_write(i, reset_value[i]); + else + ctr_write(i, 0); + } + + /* Clear the freeze bit, and enable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(); + + oprofile_running = 1; +} + +/* Stop the counters on this CPU */ +static void fsl7450_stop(void) +{ + /* freeze counters */ + pmc_stop_ctrs(); + + oprofile_running = 0; + + mb(); +} + + +/* Handle the interrupt on this CPU, and log a sample for each + * event that triggered the interrupt */ +static void fsl7450_handle_interrupt(struct pt_regs *regs, + struct op_counter_config *ctr) +{ + unsigned long pc; + int is_kernel; + int val; + int i; + + /* set the PMM bit (see comment below) */ + mtmsr(mfmsr() | MSR_PMM); + + pc = mfspr(SPRN_SIAR); + is_kernel = (pc >= KERNELBASE); + + for (i = 0; i < NUM_CTRS; ++i) { + val = ctr_read(i); + if (val < 0) { + if (oprofile_running && ctr[i].enabled) { + oprofile_add_pc(pc, is_kernel, i); + ctr_write(i, reset_value[i]); + } else { + ctr_write(i, 0); + } + } + } + + /* The freeze bit was set by the interrupt. */ + /* Clear the freeze bit, and reenable the interrupt. + * The counters won't actually start until the rfi clears + * the PMM bit */ + pmc_start_ctrs(); +} + +struct op_powerpc_model op_model_7450= { + .reg_setup = fsl7450_reg_setup, + .cpu_setup = fsl7450_cpu_setup, + .start = fsl7450_start, + .stop = fsl7450_stop, + .handle_interrupt = fsl7450_handle_interrupt, +}; |