aboutsummaryrefslogtreecommitdiff
path: root/arch/ia64/hp/sim/simserial.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/ia64/hp/sim/simserial.c')
-rw-r--r--arch/ia64/hp/sim/simserial.c1032
1 files changed, 1032 insertions, 0 deletions
diff --git a/arch/ia64/hp/sim/simserial.c b/arch/ia64/hp/sim/simserial.c
new file mode 100644
index 00000000000..786e70718ce
--- /dev/null
+++ b/arch/ia64/hp/sim/simserial.c
@@ -0,0 +1,1032 @@
+/*
+ * Simulated Serial Driver (fake serial)
+ *
+ * This driver is mostly used for bringup purposes and will go away.
+ * It has a strong dependency on the system console. All outputs
+ * are rerouted to the same facility as the one used by printk which, in our
+ * case means sys_sim.c console (goes via the simulator). The code hereafter
+ * is completely leveraged from the serial.c driver.
+ *
+ * Copyright (C) 1999-2000, 2002-2003 Hewlett-Packard Co
+ * Stephane Eranian <eranian@hpl.hp.com>
+ * David Mosberger-Tang <davidm@hpl.hp.com>
+ *
+ * 02/04/00 D. Mosberger Merged in serial.c bug fixes in rs_close().
+ * 02/25/00 D. Mosberger Synced up with 2.3.99pre-5 version of serial.c.
+ * 07/30/02 D. Mosberger Replace sti()/cli() with explicit spinlocks & local irq masking
+ */
+
+#include <linux/config.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/fcntl.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/console.h>
+#include <linux/module.h>
+#include <linux/serial.h>
+#include <linux/serialP.h>
+
+#include <asm/irq.h>
+#include <asm/hw_irq.h>
+#include <asm/uaccess.h>
+
+#ifdef CONFIG_KDB
+# include <linux/kdb.h>
+#endif
+
+#undef SIMSERIAL_DEBUG /* define this to get some debug information */
+
+#define KEYBOARD_INTR 3 /* must match with simulator! */
+
+#define NR_PORTS 1 /* only one port for now */
+#define SERIAL_INLINE 1
+
+#ifdef SERIAL_INLINE
+#define _INLINE_ inline
+#endif
+
+#define IRQ_T(info) ((info->flags & ASYNC_SHARE_IRQ) ? SA_SHIRQ : SA_INTERRUPT)
+
+#define SSC_GETCHAR 21
+
+extern long ia64_ssc (long, long, long, long, int);
+extern void ia64_ssc_connect_irq (long intr, long irq);
+
+static char *serial_name = "SimSerial driver";
+static char *serial_version = "0.6";
+
+/*
+ * This has been extracted from asm/serial.h. We need one eventually but
+ * I don't know exactly what we're going to put in it so just fake one
+ * for now.
+ */
+#define BASE_BAUD ( 1843200 / 16 )
+
+#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST)
+
+/*
+ * Most of the values here are meaningless to this particular driver.
+ * However some values must be preserved for the code (leveraged from serial.c
+ * to work correctly).
+ * port must not be 0
+ * type must not be UNKNOWN
+ * So I picked arbitrary (guess from where?) values instead
+ */
+static struct serial_state rs_table[NR_PORTS]={
+ /* UART CLK PORT IRQ FLAGS */
+ { 0, BASE_BAUD, 0x3F8, 0, STD_COM_FLAGS,0,PORT_16550 } /* ttyS0 */
+};
+
+/*
+ * Just for the fun of it !
+ */
+static struct serial_uart_config uart_config[] = {
+ { "unknown", 1, 0 },
+ { "8250", 1, 0 },
+ { "16450", 1, 0 },
+ { "16550", 1, 0 },
+ { "16550A", 16, UART_CLEAR_FIFO | UART_USE_FIFO },
+ { "cirrus", 1, 0 },
+ { "ST16650", 1, UART_CLEAR_FIFO | UART_STARTECH },
+ { "ST16650V2", 32, UART_CLEAR_FIFO | UART_USE_FIFO |
+ UART_STARTECH },
+ { "TI16750", 64, UART_CLEAR_FIFO | UART_USE_FIFO},
+ { 0, 0}
+};
+
+struct tty_driver *hp_simserial_driver;
+
+static struct async_struct *IRQ_ports[NR_IRQS];
+
+static struct console *console;
+
+static unsigned char *tmp_buf;
+static DECLARE_MUTEX(tmp_buf_sem);
+
+extern struct console *console_drivers; /* from kernel/printk.c */
+
+/*
+ * ------------------------------------------------------------
+ * rs_stop() and rs_start()
+ *
+ * This routines are called before setting or resetting tty->stopped.
+ * They enable or disable transmitter interrupts, as necessary.
+ * ------------------------------------------------------------
+ */
+static void rs_stop(struct tty_struct *tty)
+{
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_stop: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
+ tty->stopped, tty->hw_stopped, tty->flow_stopped);
+#endif
+
+}
+
+static void rs_start(struct tty_struct *tty)
+{
+#if SIMSERIAL_DEBUG
+ printk("rs_start: tty->stopped=%d tty->hw_stopped=%d tty->flow_stopped=%d\n",
+ tty->stopped, tty->hw_stopped, tty->flow_stopped);
+#endif
+}
+
+static void receive_chars(struct tty_struct *tty, struct pt_regs *regs)
+{
+ unsigned char ch;
+ static unsigned char seen_esc = 0;
+
+ while ( (ch = ia64_ssc(0, 0, 0, 0, SSC_GETCHAR)) ) {
+ if ( ch == 27 && seen_esc == 0 ) {
+ seen_esc = 1;
+ continue;
+ } else {
+ if ( seen_esc==1 && ch == 'O' ) {
+ seen_esc = 2;
+ continue;
+ } else if ( seen_esc == 2 ) {
+ if ( ch == 'P' ) show_state(); /* F1 key */
+#ifdef CONFIG_KDB
+ if ( ch == 'S' )
+ kdb(KDB_REASON_KEYBOARD, 0, (kdb_eframe_t) regs);
+#endif
+
+ seen_esc = 0;
+ continue;
+ }
+ }
+ seen_esc = 0;
+ if (tty->flip.count >= TTY_FLIPBUF_SIZE) break;
+
+ *tty->flip.char_buf_ptr = ch;
+
+ *tty->flip.flag_buf_ptr = 0;
+
+ tty->flip.flag_buf_ptr++;
+ tty->flip.char_buf_ptr++;
+ tty->flip.count++;
+ }
+ tty_flip_buffer_push(tty);
+}
+
+/*
+ * This is the serial driver's interrupt routine for a single port
+ */
+static irqreturn_t rs_interrupt_single(int irq, void *dev_id, struct pt_regs * regs)
+{
+ struct async_struct * info;
+
+ /*
+ * I don't know exactly why they don't use the dev_id opaque data
+ * pointer instead of this extra lookup table
+ */
+ info = IRQ_ports[irq];
+ if (!info || !info->tty) {
+ printk(KERN_INFO "simrs_interrupt_single: info|tty=0 info=%p problem\n", info);
+ return IRQ_NONE;
+ }
+ /*
+ * pretty simple in our case, because we only get interrupts
+ * on inbound traffic
+ */
+ receive_chars(info->tty, regs);
+ return IRQ_HANDLED;
+}
+
+/*
+ * -------------------------------------------------------------------
+ * Here ends the serial interrupt routines.
+ * -------------------------------------------------------------------
+ */
+
+#if 0
+/*
+ * not really used in our situation so keep them commented out for now
+ */
+static DECLARE_TASK_QUEUE(tq_serial); /* used to be at the top of the file */
+static void do_serial_bh(void)
+{
+ run_task_queue(&tq_serial);
+ printk(KERN_ERR "do_serial_bh: called\n");
+}
+#endif
+
+static void do_softint(void *private_)
+{
+ printk(KERN_ERR "simserial: do_softint called\n");
+}
+
+static void rs_put_char(struct tty_struct *tty, unsigned char ch)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (!tty || !info->xmit.buf) return;
+
+ local_irq_save(flags);
+ if (CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE) == 0) {
+ local_irq_restore(flags);
+ return;
+ }
+ info->xmit.buf[info->xmit.head] = ch;
+ info->xmit.head = (info->xmit.head + 1) & (SERIAL_XMIT_SIZE-1);
+ local_irq_restore(flags);
+}
+
+static _INLINE_ void transmit_chars(struct async_struct *info, int *intr_done)
+{
+ int count;
+ unsigned long flags;
+
+
+ local_irq_save(flags);
+
+ if (info->x_char) {
+ char c = info->x_char;
+
+ console->write(console, &c, 1);
+
+ info->state->icount.tx++;
+ info->x_char = 0;
+
+ goto out;
+ }
+
+ if (info->xmit.head == info->xmit.tail || info->tty->stopped || info->tty->hw_stopped) {
+#ifdef SIMSERIAL_DEBUG
+ printk("transmit_chars: head=%d, tail=%d, stopped=%d\n",
+ info->xmit.head, info->xmit.tail, info->tty->stopped);
+#endif
+ goto out;
+ }
+ /*
+ * We removed the loop and try to do it in to chunks. We need
+ * 2 operations maximum because it's a ring buffer.
+ *
+ * First from current to tail if possible.
+ * Then from the beginning of the buffer until necessary
+ */
+
+ count = min(CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE),
+ SERIAL_XMIT_SIZE - info->xmit.tail);
+ console->write(console, info->xmit.buf+info->xmit.tail, count);
+
+ info->xmit.tail = (info->xmit.tail+count) & (SERIAL_XMIT_SIZE-1);
+
+ /*
+ * We have more at the beginning of the buffer
+ */
+ count = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+ if (count) {
+ console->write(console, info->xmit.buf, count);
+ info->xmit.tail += count;
+ }
+out:
+ local_irq_restore(flags);
+}
+
+static void rs_flush_chars(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ if (info->xmit.head == info->xmit.tail || tty->stopped || tty->hw_stopped ||
+ !info->xmit.buf)
+ return;
+
+ transmit_chars(info, NULL);
+}
+
+
+static int rs_write(struct tty_struct * tty,
+ const unsigned char *buf, int count)
+{
+ int c, ret = 0;
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ if (!tty || !info->xmit.buf || !tmp_buf) return 0;
+
+ local_irq_save(flags);
+ while (1) {
+ c = CIRC_SPACE_TO_END(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+ if (count < c)
+ c = count;
+ if (c <= 0) {
+ break;
+ }
+ memcpy(info->xmit.buf + info->xmit.head, buf, c);
+ info->xmit.head = ((info->xmit.head + c) &
+ (SERIAL_XMIT_SIZE-1));
+ buf += c;
+ count -= c;
+ ret += c;
+ }
+ local_irq_restore(flags);
+ /*
+ * Hey, we transmit directly from here in our case
+ */
+ if (CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE)
+ && !tty->stopped && !tty->hw_stopped) {
+ transmit_chars(info, NULL);
+ }
+ return ret;
+}
+
+static int rs_write_room(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ return CIRC_SPACE(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static int rs_chars_in_buffer(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ return CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
+}
+
+static void rs_flush_buffer(struct tty_struct *tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ info->xmit.head = info->xmit.tail = 0;
+ local_irq_restore(flags);
+
+ wake_up_interruptible(&tty->write_wait);
+
+ if ((tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) &&
+ tty->ldisc.write_wakeup)
+ (tty->ldisc.write_wakeup)(tty);
+}
+
+/*
+ * This function is used to send a high-priority XON/XOFF character to
+ * the device
+ */
+static void rs_send_xchar(struct tty_struct *tty, char ch)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ info->x_char = ch;
+ if (ch) {
+ /*
+ * I guess we could call console->write() directly but
+ * let's do that for now.
+ */
+ transmit_chars(info, NULL);
+ }
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_throttle()
+ *
+ * This routine is called by the upper-layer tty layer to signal that
+ * incoming characters should be throttled.
+ * ------------------------------------------------------------
+ */
+static void rs_throttle(struct tty_struct * tty)
+{
+ if (I_IXOFF(tty)) rs_send_xchar(tty, STOP_CHAR(tty));
+
+ printk(KERN_INFO "simrs_throttle called\n");
+}
+
+static void rs_unthrottle(struct tty_struct * tty)
+{
+ struct async_struct *info = (struct async_struct *)tty->driver_data;
+
+ if (I_IXOFF(tty)) {
+ if (info->x_char)
+ info->x_char = 0;
+ else
+ rs_send_xchar(tty, START_CHAR(tty));
+ }
+ printk(KERN_INFO "simrs_unthrottle called\n");
+}
+
+/*
+ * rs_break() --- routine which turns the break handling on or off
+ */
+static void rs_break(struct tty_struct *tty, int break_state)
+{
+}
+
+static int rs_ioctl(struct tty_struct *tty, struct file * file,
+ unsigned int cmd, unsigned long arg)
+{
+ if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) &&
+ (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGSTRUCT) &&
+ (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT)) {
+ if (tty->flags & (1 << TTY_IO_ERROR))
+ return -EIO;
+ }
+
+ switch (cmd) {
+ case TIOCMGET:
+ printk(KERN_INFO "rs_ioctl: TIOCMGET called\n");
+ return -EINVAL;
+ case TIOCMBIS:
+ case TIOCMBIC:
+ case TIOCMSET:
+ printk(KERN_INFO "rs_ioctl: TIOCMBIS/BIC/SET called\n");
+ return -EINVAL;
+ case TIOCGSERIAL:
+ printk(KERN_INFO "simrs_ioctl TIOCGSERIAL called\n");
+ return 0;
+ case TIOCSSERIAL:
+ printk(KERN_INFO "simrs_ioctl TIOCSSERIAL called\n");
+ return 0;
+ case TIOCSERCONFIG:
+ printk(KERN_INFO "rs_ioctl: TIOCSERCONFIG called\n");
+ return -EINVAL;
+
+ case TIOCSERGETLSR: /* Get line status register */
+ printk(KERN_INFO "rs_ioctl: TIOCSERGETLSR called\n");
+ return -EINVAL;
+
+ case TIOCSERGSTRUCT:
+ printk(KERN_INFO "rs_ioctl: TIOCSERGSTRUCT called\n");
+#if 0
+ if (copy_to_user((struct async_struct *) arg,
+ info, sizeof(struct async_struct)))
+ return -EFAULT;
+#endif
+ return 0;
+
+ /*
+ * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change
+ * - mask passed in arg for lines of interest
+ * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking)
+ * Caller should use TIOCGICOUNT to see which one it was
+ */
+ case TIOCMIWAIT:
+ printk(KERN_INFO "rs_ioctl: TIOCMIWAIT: called\n");
+ return 0;
+ /*
+ * Get counter of input serial line interrupts (DCD,RI,DSR,CTS)
+ * Return: write counters to the user passed counter struct
+ * NB: both 1->0 and 0->1 transitions are counted except for
+ * RI where only 0->1 is counted.
+ */
+ case TIOCGICOUNT:
+ printk(KERN_INFO "rs_ioctl: TIOCGICOUNT called\n");
+ return 0;
+
+ case TIOCSERGWILD:
+ case TIOCSERSWILD:
+ /* "setserial -W" is called in Debian boot */
+ printk (KERN_INFO "TIOCSER?WILD ioctl obsolete, ignored.\n");
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+ return 0;
+}
+
+#define RELEVANT_IFLAG(iflag) (iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
+
+static void rs_set_termios(struct tty_struct *tty, struct termios *old_termios)
+{
+ unsigned int cflag = tty->termios->c_cflag;
+
+ if ( (cflag == old_termios->c_cflag)
+ && ( RELEVANT_IFLAG(tty->termios->c_iflag)
+ == RELEVANT_IFLAG(old_termios->c_iflag)))
+ return;
+
+
+ /* Handle turning off CRTSCTS */
+ if ((old_termios->c_cflag & CRTSCTS) &&
+ !(tty->termios->c_cflag & CRTSCTS)) {
+ tty->hw_stopped = 0;
+ rs_start(tty);
+ }
+}
+/*
+ * This routine will shutdown a serial port; interrupts are disabled, and
+ * DTR is dropped if the hangup on close termio flag is on.
+ */
+static void shutdown(struct async_struct * info)
+{
+ unsigned long flags;
+ struct serial_state *state;
+ int retval;
+
+ if (!(info->flags & ASYNC_INITIALIZED)) return;
+
+ state = info->state;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("Shutting down serial port %d (irq %d)....", info->line,
+ state->irq);
+#endif
+
+ local_irq_save(flags);
+ {
+ /*
+ * First unlink the serial port from the IRQ chain...
+ */
+ if (info->next_port)
+ info->next_port->prev_port = info->prev_port;
+ if (info->prev_port)
+ info->prev_port->next_port = info->next_port;
+ else
+ IRQ_ports[state->irq] = info->next_port;
+
+ /*
+ * Free the IRQ, if necessary
+ */
+ if (state->irq && (!IRQ_ports[state->irq] ||
+ !IRQ_ports[state->irq]->next_port)) {
+ if (IRQ_ports[state->irq]) {
+ free_irq(state->irq, NULL);
+ retval = request_irq(state->irq, rs_interrupt_single,
+ IRQ_T(info), "serial", NULL);
+
+ if (retval)
+ printk(KERN_ERR "serial shutdown: request_irq: error %d"
+ " Couldn't reacquire IRQ.\n", retval);
+ } else
+ free_irq(state->irq, NULL);
+ }
+
+ if (info->xmit.buf) {
+ free_page((unsigned long) info->xmit.buf);
+ info->xmit.buf = 0;
+ }
+
+ if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->flags &= ~ASYNC_INITIALIZED;
+ }
+ local_irq_restore(flags);
+}
+
+/*
+ * ------------------------------------------------------------
+ * rs_close()
+ *
+ * This routine is called when the serial port gets closed. First, we
+ * wait for the last remaining data to be sent. Then, we unlink its
+ * async structure from the interrupt chain if necessary, and we free
+ * that IRQ if nothing is left in the chain.
+ * ------------------------------------------------------------
+ */
+static void rs_close(struct tty_struct *tty, struct file * filp)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct serial_state *state;
+ unsigned long flags;
+
+ if (!info ) return;
+
+ state = info->state;
+
+ local_irq_save(flags);
+ if (tty_hung_up_p(filp)) {
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_close: hung_up\n");
+#endif
+ local_irq_restore(flags);
+ return;
+ }
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_close ttys%d, count = %d\n", info->line, state->count);
+#endif
+ if ((tty->count == 1) && (state->count != 1)) {
+ /*
+ * Uh, oh. tty->count is 1, which means that the tty
+ * structure will be freed. state->count should always
+ * be one in these conditions. If it's greater than
+ * one, we've got real problems, since it means the
+ * serial port won't be shutdown.
+ */
+ printk(KERN_ERR "rs_close: bad serial port count; tty->count is 1, "
+ "state->count is %d\n", state->count);
+ state->count = 1;
+ }
+ if (--state->count < 0) {
+ printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n",
+ info->line, state->count);
+ state->count = 0;
+ }
+ if (state->count) {
+ local_irq_restore(flags);
+ return;
+ }
+ info->flags |= ASYNC_CLOSING;
+ local_irq_restore(flags);
+
+ /*
+ * Now we wait for the transmit buffer to clear; and we notify
+ * the line discipline to only process XON/XOFF characters.
+ */
+ shutdown(info);
+ if (tty->driver->flush_buffer) tty->driver->flush_buffer(tty);
+ if (tty->ldisc.flush_buffer) tty->ldisc.flush_buffer(tty);
+ info->event = 0;
+ info->tty = 0;
+ if (info->blocked_open) {
+ if (info->close_delay) {
+ current->state = TASK_INTERRUPTIBLE;
+ schedule_timeout(info->close_delay);
+ }
+ wake_up_interruptible(&info->open_wait);
+ }
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING);
+ wake_up_interruptible(&info->close_wait);
+}
+
+/*
+ * rs_wait_until_sent() --- wait until the transmitter is empty
+ */
+static void rs_wait_until_sent(struct tty_struct *tty, int timeout)
+{
+}
+
+
+/*
+ * rs_hangup() --- called by tty_hangup() when a hangup is signaled.
+ */
+static void rs_hangup(struct tty_struct *tty)
+{
+ struct async_struct * info = (struct async_struct *)tty->driver_data;
+ struct serial_state *state = info->state;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_hangup: called\n");
+#endif
+
+ state = info->state;
+
+ rs_flush_buffer(tty);
+ if (info->flags & ASYNC_CLOSING)
+ return;
+ shutdown(info);
+
+ info->event = 0;
+ state->count = 0;
+ info->flags &= ~ASYNC_NORMAL_ACTIVE;
+ info->tty = 0;
+ wake_up_interruptible(&info->open_wait);
+}
+
+
+static int get_async_struct(int line, struct async_struct **ret_info)
+{
+ struct async_struct *info;
+ struct serial_state *sstate;
+
+ sstate = rs_table + line;
+ sstate->count++;
+ if (sstate->info) {
+ *ret_info = sstate->info;
+ return 0;
+ }
+ info = kmalloc(sizeof(struct async_struct), GFP_KERNEL);
+ if (!info) {
+ sstate->count--;
+ return -ENOMEM;
+ }
+ memset(info, 0, sizeof(struct async_struct));
+ init_waitqueue_head(&info->open_wait);
+ init_waitqueue_head(&info->close_wait);
+ init_waitqueue_head(&info->delta_msr_wait);
+ info->magic = SERIAL_MAGIC;
+ info->port = sstate->port;
+ info->flags = sstate->flags;
+ info->xmit_fifo_size = sstate->xmit_fifo_size;
+ info->line = line;
+ INIT_WORK(&info->work, do_softint, info);
+ info->state = sstate;
+ if (sstate->info) {
+ kfree(info);
+ *ret_info = sstate->info;
+ return 0;
+ }
+ *ret_info = sstate->info = info;
+ return 0;
+}
+
+static int
+startup(struct async_struct *info)
+{
+ unsigned long flags;
+ int retval=0;
+ irqreturn_t (*handler)(int, void *, struct pt_regs *);
+ struct serial_state *state= info->state;
+ unsigned long page;
+
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+
+ local_irq_save(flags);
+
+ if (info->flags & ASYNC_INITIALIZED) {
+ free_page(page);
+ goto errout;
+ }
+
+ if (!state->port || !state->type) {
+ if (info->tty) set_bit(TTY_IO_ERROR, &info->tty->flags);
+ free_page(page);
+ goto errout;
+ }
+ if (info->xmit.buf)
+ free_page(page);
+ else
+ info->xmit.buf = (unsigned char *) page;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("startup: ttys%d (irq %d)...", info->line, state->irq);
+#endif
+
+ /*
+ * Allocate the IRQ if necessary
+ */
+ if (state->irq && (!IRQ_ports[state->irq] ||
+ !IRQ_ports[state->irq]->next_port)) {
+ if (IRQ_ports[state->irq]) {
+ retval = -EBUSY;
+ goto errout;
+ } else
+ handler = rs_interrupt_single;
+
+ retval = request_irq(state->irq, handler, IRQ_T(info), "simserial", NULL);
+ if (retval) {
+ if (capable(CAP_SYS_ADMIN)) {
+ if (info->tty)
+ set_bit(TTY_IO_ERROR,
+ &info->tty->flags);
+ retval = 0;
+ }
+ goto errout;
+ }
+ }
+
+ /*
+ * Insert serial port into IRQ chain.
+ */
+ info->prev_port = 0;
+ info->next_port = IRQ_ports[state->irq];
+ if (info->next_port)
+ info->next_port->prev_port = info;
+ IRQ_ports[state->irq] = info;
+
+ if (info->tty) clear_bit(TTY_IO_ERROR, &info->tty->flags);
+
+ info->xmit.head = info->xmit.tail = 0;
+
+#if 0
+ /*
+ * Set up serial timers...
+ */
+ timer_table[RS_TIMER].expires = jiffies + 2*HZ/100;
+ timer_active |= 1 << RS_TIMER;
+#endif
+
+ /*
+ * Set up the tty->alt_speed kludge
+ */
+ if (info->tty) {
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)
+ info->tty->alt_speed = 57600;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI)
+ info->tty->alt_speed = 115200;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI)
+ info->tty->alt_speed = 230400;
+ if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP)
+ info->tty->alt_speed = 460800;
+ }
+
+ info->flags |= ASYNC_INITIALIZED;
+ local_irq_restore(flags);
+ return 0;
+
+errout:
+ local_irq_restore(flags);
+ return retval;
+}
+
+
+/*
+ * This routine is called whenever a serial port is opened. It
+ * enables interrupts for a serial port, linking in its async structure into
+ * the IRQ chain. It also performs the serial-specific
+ * initialization for the tty structure.
+ */
+static int rs_open(struct tty_struct *tty, struct file * filp)
+{
+ struct async_struct *info;
+ int retval, line;
+ unsigned long page;
+
+ line = tty->index;
+ if ((line < 0) || (line >= NR_PORTS))
+ return -ENODEV;
+ retval = get_async_struct(line, &info);
+ if (retval)
+ return retval;
+ tty->driver_data = info;
+ info->tty = tty;
+
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_open %s, count = %d\n", tty->name, info->state->count);
+#endif
+ info->tty->low_latency = (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+
+ if (!tmp_buf) {
+ page = get_zeroed_page(GFP_KERNEL);
+ if (!page)
+ return -ENOMEM;
+ if (tmp_buf)
+ free_page(page);
+ else
+ tmp_buf = (unsigned char *) page;
+ }
+
+ /*
+ * If the port is the middle of closing, bail out now
+ */
+ if (tty_hung_up_p(filp) ||
+ (info->flags & ASYNC_CLOSING)) {
+ if (info->flags & ASYNC_CLOSING)
+ interruptible_sleep_on(&info->close_wait);
+#ifdef SERIAL_DO_RESTART
+ return ((info->flags & ASYNC_HUP_NOTIFY) ?
+ -EAGAIN : -ERESTARTSYS);
+#else
+ return -EAGAIN;
+#endif
+ }
+
+ /*
+ * Start up serial port
+ */
+ retval = startup(info);
+ if (retval) {
+ return retval;
+ }
+
+ /*
+ * figure out which console to use (should be one already)
+ */
+ console = console_drivers;
+ while (console) {
+ if ((console->flags & CON_ENABLED) && console->write) break;
+ console = console->next;
+ }
+
+#ifdef SIMSERIAL_DEBUG
+ printk("rs_open ttys%d successful\n", info->line);
+#endif
+ return 0;
+}
+
+/*
+ * /proc fs routines....
+ */
+
+static inline int line_info(char *buf, struct serial_state *state)
+{
+ return sprintf(buf, "%d: uart:%s port:%lX irq:%d\n",
+ state->line, uart_config[state->type].name,
+ state->port, state->irq);
+}
+
+static int rs_read_proc(char *page, char **start, off_t off, int count,
+ int *eof, void *data)
+{
+ int i, len = 0, l;
+ off_t begin = 0;
+
+ len += sprintf(page, "simserinfo:1.0 driver:%s\n", serial_version);
+ for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ l = line_info(page + len, &rs_table[i]);
+ len += l;
+ if (len+begin > off+count)
+ goto done;
+ if (len+begin < off) {
+ begin += len;
+ len = 0;
+ }
+ }
+ *eof = 1;
+done:
+ if (off >= len+begin)
+ return 0;
+ *start = page + (begin-off);
+ return ((count < begin+len-off) ? count : begin+len-off);
+}
+
+/*
+ * ---------------------------------------------------------------------
+ * rs_init() and friends
+ *
+ * rs_init() is called at boot-time to initialize the serial driver.
+ * ---------------------------------------------------------------------
+ */
+
+/*
+ * This routine prints out the appropriate serial driver version
+ * number, and identifies which options were configured into this
+ * driver.
+ */
+static inline void show_serial_version(void)
+{
+ printk(KERN_INFO "%s version %s with", serial_name, serial_version);
+ printk(KERN_INFO " no serial options enabled\n");
+}
+
+static struct tty_operations hp_ops = {
+ .open = rs_open,
+ .close = rs_close,
+ .write = rs_write,
+ .put_char = rs_put_char,
+ .flush_chars = rs_flush_chars,
+ .write_room = rs_write_room,
+ .chars_in_buffer = rs_chars_in_buffer,
+ .flush_buffer = rs_flush_buffer,
+ .ioctl = rs_ioctl,
+ .throttle = rs_throttle,
+ .unthrottle = rs_unthrottle,
+ .send_xchar = rs_send_xchar,
+ .set_termios = rs_set_termios,
+ .stop = rs_stop,
+ .start = rs_start,
+ .hangup = rs_hangup,
+ .break_ctl = rs_break,
+ .wait_until_sent = rs_wait_until_sent,
+ .read_proc = rs_read_proc,
+};
+
+/*
+ * The serial driver boot-time initialization code!
+ */
+static int __init
+simrs_init (void)
+{
+ int i;
+ struct serial_state *state;
+
+ if (!ia64_platform_is("hpsim"))
+ return -ENODEV;
+
+ hp_simserial_driver = alloc_tty_driver(1);
+ if (!hp_simserial_driver)
+ return -ENOMEM;
+
+ show_serial_version();
+
+ /* Initialize the tty_driver structure */
+
+ hp_simserial_driver->owner = THIS_MODULE;
+ hp_simserial_driver->driver_name = "simserial";
+ hp_simserial_driver->name = "ttyS";
+ hp_simserial_driver->major = TTY_MAJOR;
+ hp_simserial_driver->minor_start = 64;
+ hp_simserial_driver->type = TTY_DRIVER_TYPE_SERIAL;
+ hp_simserial_driver->subtype = SERIAL_TYPE_NORMAL;
+ hp_simserial_driver->init_termios = tty_std_termios;
+ hp_simserial_driver->init_termios.c_cflag =
+ B9600 | CS8 | CREAD | HUPCL | CLOCAL;
+ hp_simserial_driver->flags = TTY_DRIVER_REAL_RAW;
+ tty_set_operations(hp_simserial_driver, &hp_ops);
+
+ /*
+ * Let's have a little bit of fun !
+ */
+ for (i = 0, state = rs_table; i < NR_PORTS; i++,state++) {
+
+ if (state->type == PORT_UNKNOWN) continue;
+
+ if (!state->irq) {
+ state->irq = assign_irq_vector(AUTO_ASSIGN);
+ ia64_ssc_connect_irq(KEYBOARD_INTR, state->irq);
+ }
+
+ printk(KERN_INFO "ttyS%d at 0x%04lx (irq = %d) is a %s\n",
+ state->line,
+ state->port, state->irq,
+ uart_config[state->type].name);
+ }
+
+ if (tty_register_driver(hp_simserial_driver))
+ panic("Couldn't register simserial driver\n");
+
+ return 0;
+}
+
+#ifndef MODULE
+__initcall(simrs_init);
+#endif