aboutsummaryrefslogtreecommitdiff
path: root/arch/blackfin/mach-bf527/include/mach
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf527/include/mach')
-rw-r--r--arch/blackfin/mach-bf527/include/mach/anomaly.h19
-rw-r--r--arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h2
-rw-r--r--arch/blackfin/mach-bf527/include/mach/blackfin.h1
-rw-r--r--arch/blackfin/mach-bf527/include/mach/mem_map.h56
4 files changed, 26 insertions, 52 deletions
diff --git a/arch/blackfin/mach-bf527/include/mach/anomaly.h b/arch/blackfin/mach-bf527/include/mach/anomaly.h
index c84ddea9574..c438ca89d8c 100644
--- a/arch/blackfin/mach-bf527/include/mach/anomaly.h
+++ b/arch/blackfin/mach-bf527/include/mach/anomaly.h
@@ -34,7 +34,7 @@
#define _ANOMALY_BF527(rev527) (ANOMALY_BF527 && __SILICON_REVISION__ rev527)
#define _ANOMALY_BF526_BF527(rev526, rev527) (_ANOMALY_BF526(rev526) || _ANOMALY_BF527(rev527))
-/* Multi-issue instruction with dsp32shiftimm in slot1 and P-reg store in slot 2 not supported */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */
#define ANOMALY_05000074 (1)
/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
#define ANOMALY_05000119 (1) /* note: brokenness is noted in documentation, not anomaly sheet */
@@ -176,6 +176,8 @@
#define ANOMALY_05000443 (1)
/* The WURESET Bit in the SYSCR Register is not Functional */
#define ANOMALY_05000445 (1)
+/* USB DMA Short Packet Data Corruption */
+#define ANOMALY_05000450 (1)
/* BCODE_QUICKBOOT, BCODE_ALLBOOT, and BCODE_FULLBOOT Settings in SYSCR Register Not Functional */
#define ANOMALY_05000451 (1)
/* Incorrect Default Hysteresis Setting for RESET, NMI, and BMODE Signals */
@@ -184,8 +186,12 @@
#define ANOMALY_05000456 (1)
/* Host DMA Port Responds to Certain Bus Activity Without HOST_CE Assertion */
#define ANOMALY_05000457 (1)
-/* False Hardware Error when RETI points to invalid memory */
+/* False Hardware Error when RETI Points to Invalid Memory */
#define ANOMALY_05000461 (1)
+/* USB Rx DMA hang */
+#define ANOMALY_05000465 (1)
+/* Possible RX data corruption when control & data EP FIFOs are accessed via the core */
+#define ANOMALY_05000467 (1)
/* Anomalies that don't exist on this proc */
#define ANOMALY_05000099 (0)
@@ -195,24 +201,31 @@
#define ANOMALY_05000158 (0)
#define ANOMALY_05000171 (0)
#define ANOMALY_05000179 (0)
+#define ANOMALY_05000182 (0)
#define ANOMALY_05000183 (0)
+#define ANOMALY_05000189 (0)
#define ANOMALY_05000198 (0)
+#define ANOMALY_05000202 (0)
#define ANOMALY_05000215 (0)
#define ANOMALY_05000220 (0)
#define ANOMALY_05000227 (0)
#define ANOMALY_05000230 (0)
#define ANOMALY_05000231 (0)
#define ANOMALY_05000233 (0)
+#define ANOMALY_05000234 (0)
#define ANOMALY_05000242 (0)
#define ANOMALY_05000244 (0)
#define ANOMALY_05000248 (0)
#define ANOMALY_05000250 (0)
+#define ANOMALY_05000257 (0)
#define ANOMALY_05000261 (0)
#define ANOMALY_05000263 (0)
#define ANOMALY_05000266 (0)
#define ANOMALY_05000273 (0)
#define ANOMALY_05000274 (0)
#define ANOMALY_05000278 (0)
+#define ANOMALY_05000281 (0)
+#define ANOMALY_05000283 (0)
#define ANOMALY_05000285 (0)
#define ANOMALY_05000287 (0)
#define ANOMALY_05000301 (0)
@@ -220,6 +233,7 @@
#define ANOMALY_05000307 (0)
#define ANOMALY_05000311 (0)
#define ANOMALY_05000312 (0)
+#define ANOMALY_05000315 (0)
#define ANOMALY_05000323 (0)
#define ANOMALY_05000362 (1)
#define ANOMALY_05000363 (0)
@@ -227,6 +241,5 @@
#define ANOMALY_05000412 (0)
#define ANOMALY_05000447 (0)
#define ANOMALY_05000448 (0)
-#define ANOMALY_05000450 (0)
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
index a625659dd67..ebd6cebc1fb 100644
--- a/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
+++ b/arch/blackfin/mach-bf527/include/mach/bfin_serial_5xx.h
@@ -53,7 +53,7 @@
#define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0)
#define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0)
-#define UART_GET_CTS(x) (!gpio_get_value(x->cts_pin))
+#define UART_GET_CTS(x) gpio_get_value(x->cts_pin)
#define UART_DISABLE_RTS(x) gpio_set_value(x->rts_pin, 1)
#define UART_ENABLE_RTS(x) gpio_set_value(x->rts_pin, 0)
#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v)
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index 417abcd61f4..03665a8e16b 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -33,7 +33,6 @@
#define _MACH_BLACKFIN_H_
#include "bf527.h"
-#include "mem_map.h"
#include "defBF522.h"
#include "anomaly.h"
diff --git a/arch/blackfin/mach-bf527/include/mach/mem_map.h b/arch/blackfin/mach-bf527/include/mach/mem_map.h
index 019e0017ad8..d96e894afd2 100644
--- a/arch/blackfin/mach-bf527/include/mach/mem_map.h
+++ b/arch/blackfin/mach-bf527/include/mach/mem_map.h
@@ -1,38 +1,16 @@
/*
- * file: include/asm-blackfin/mach-bf527/mem_map.h
- * based on: include/asm-blackfin/mach-bf537/mem_map.h
- * author: Michael Hennerich (michael.hennerich@analog.com)
+ * BF52x memory map
*
- * created:
- * description:
- * Memory MAP Common header file for blackfin BF527/5/2 of processors.
- * rev:
- *
- * modified:
- *
- * bugs: enter bugs at http://blackfin.uclinux.org/
- *
- * this program is free software; you can redistribute it and/or modify
- * it under the terms of the gnu general public license as published by
- * the free software foundation; either version 2, or (at your option)
- * any later version.
- *
- * this program is distributed in the hope that it will be useful,
- * but without any warranty; without even the implied warranty of
- * merchantability or fitness for a particular purpose. see the
- * gnu general public license for more details.
- *
- * you should have received a copy of the gnu general public license
- * along with this program; see the file copying.
- * if not, write to the free software foundation,
- * 59 temple place - suite 330, boston, ma 02111-1307, usa.
+ * Copyright 2004-2009 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
*/
-#ifndef _MEM_MAP_527_H_
-#define _MEM_MAP_527_H_
+#ifndef __BFIN_MACH_MEM_MAP_H__
+#define __BFIN_MACH_MEM_MAP_H__
-#define COREMMR_BASE 0xFFE00000 /* Core MMRs */
-#define SYSMMR_BASE 0xFFC00000 /* System MMRs */
+#ifndef __BFIN_MEM_MAP_H__
+# error "do not include mach/mem_map.h directly -- use asm/mem_map.h"
+#endif
/* Async Memory Banks */
#define ASYNC_BANK3_BASE 0x20300000 /* Async Bank 3 */
@@ -89,20 +67,4 @@
#define BFIN_DSUPBANKS 0
#endif /*CONFIG_BFIN_DCACHE */
-/* Level 2 Memory - none */
-
-#define L2_START 0
-#define L2_LENGTH 0
-
-/* Scratch Pad Memory */
-
-#define L1_SCRATCH_START 0xFFB00000
-#define L1_SCRATCH_LENGTH 0x1000
-
-#define GET_PDA_SAFE(preg) \
- preg.l = _cpu_pda; \
- preg.h = _cpu_pda;
-
-#define GET_PDA(preg, dreg) GET_PDA_SAFE(preg)
-
-#endif /* _MEM_MAP_527_H_ */
+#endif