diff options
Diffstat (limited to 'arch/arm/mach-omap2')
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap4panda.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/cclock2420_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/cclock2430_data.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/cclock44xx_data.c | 13 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/devices.c | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/drm.c | 3 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/timer.c | 8 |
9 files changed, 27 insertions, 17 deletions
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 41b581fd021..9d7909e5898 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -76,12 +76,12 @@ config ARCH_OMAP4 config SOC_OMAP5 bool "TI OMAP5" - select ARM_ARCH_TIMER select ARM_CPU_SUSPEND if PM select ARM_GIC select CPU_V7 select HAVE_SMP select COMMON_CLK + select HAVE_ARM_ARCH_TIMER comment "OMAP Core Type" depends on ARCH_OMAP2 diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 37495bc9a59..e9270b3e44c 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -397,6 +397,12 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP_PULL_ENA), OMAP4_MUX(ABE_MCBSP1_FSX, OMAP_MUX_MODE0 | OMAP_PIN_INPUT), + /* UART2 - BT/FM/GPS shared transport */ + OMAP4_MUX(UART2_CTS, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RTS, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_RX, OMAP_PIN_INPUT | OMAP_MUX_MODE0), + OMAP4_MUX(UART2_TX, OMAP_PIN_OUTPUT | OMAP_MUX_MODE0), + { .reg_offset = OMAP_MUX_TERMINATOR }, }; diff --git a/arch/arm/mach-omap2/cclock2420_data.c b/arch/arm/mach-omap2/cclock2420_data.c index 7e5febe456d..ab7e952d207 100644 --- a/arch/arm/mach-omap2/cclock2420_data.c +++ b/arch/arm/mach-omap2/cclock2420_data.c @@ -1935,6 +1935,8 @@ int __init omap2420_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/arch/arm/mach-omap2/cclock2430_data.c b/arch/arm/mach-omap2/cclock2430_data.c index eda079b96c6..eb3dab68d53 100644 --- a/arch/arm/mach-omap2/cclock2430_data.c +++ b/arch/arm/mach-omap2/cclock2430_data.c @@ -2050,6 +2050,8 @@ int __init omap2430_clk_init(void) omap2_init_clk_hw_omap_clocks(c->lk.clk); } + omap2xxx_clkt_vps_late_init(); + omap2_clk_disable_autoidle_all(); omap2_clk_enable_init_clocks(enable_init_clks, diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 5789a5e2556..a2cc046b47f 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -2026,14 +2026,13 @@ int __init omap4xxx_clk_init(void) * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power * state when turning the ABE clock domain. Workaround this by * locking the ABE DPLL on boot. + * Lock the ABE DPLL in any case to avoid issues with audio. */ - if (cpu_is_omap446x()) { - rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); - if (!rc) - rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); - if (rc) - pr_err("%s: failed to configure ABE DPLL!\n", __func__); - } + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 5e304d0719a..626f3ea3142 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -639,7 +639,7 @@ static int count_ocp2scp_devices(struct omap_ocp2scp_dev *ocp2scp_dev) return cnt; } -static void omap_init_ocp2scp(void) +static void __init omap_init_ocp2scp(void) { struct omap_hwmod *oh; struct platform_device *pdev; diff --git a/arch/arm/mach-omap2/drm.c b/arch/arm/mach-omap2/drm.c index 4c7566c7e24..2a2cfa88ddb 100644 --- a/arch/arm/mach-omap2/drm.c +++ b/arch/arm/mach-omap2/drm.c @@ -25,6 +25,7 @@ #include <linux/dma-mapping.h> #include <linux/platform_data/omap_drm.h> +#include "soc.h" #include "omap_device.h" #include "omap_hwmod.h" @@ -56,7 +57,7 @@ static int __init omap_init_drm(void) oh->name); } - platform_data.omaprev = GET_OMAP_REVISION(); + platform_data.omaprev = GET_OMAP_TYPE; return platform_device_register(&omap_drm_device); diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 129d5081ed1..793f54ac7d1 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -2132,8 +2132,12 @@ static struct omap_hwmod omap44xx_mcpdm_hwmod = { * currently reset very early during boot, before I2C is * available, so it doesn't seem that we have any choice in * the kernel other than to avoid resetting it. + * + * Also, McPDM needs to be configured to NO_IDLE mode when it + * is in used otherwise vital clocks will be gated which + * results 'slow motion' audio playback. */ - .flags = HWMOD_EXT_OPT_MAIN_CLK, + .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE, .mpu_irqs = omap44xx_mcpdm_irqs, .sdma_reqs = omap44xx_mcpdm_sdma_reqs, .main_clk = "mcpdm_fck", diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 691aa674665..b8ad6e632bb 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -165,15 +165,11 @@ static struct device_node * __init omap_get_timer_dt(struct of_device_id *match, struct device_node *np; for_each_matching_node(np, match) { - if (!of_device_is_available(np)) { - of_node_put(np); + if (!of_device_is_available(np)) continue; - } - if (property && !of_get_property(np, property, NULL)) { - of_node_put(np); + if (property && !of_get_property(np, property, NULL)) continue; - } of_add_property(np, &device_disabled); return np; |