aboutsummaryrefslogtreecommitdiff
path: root/Documentation/ABI/testing/sysfs-driver-wacom
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/ABI/testing/sysfs-driver-wacom')
-rw-r--r--Documentation/ABI/testing/sysfs-driver-wacom72
1 files changed, 72 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
new file mode 100644
index 00000000000..82d4df13644
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -0,0 +1,72 @@
+What: /sys/class/hidraw/hidraw*/device/speed
+Date: April 2010
+Kernel Version: 2.6.35
+Contact: linux-bluetooth@vger.kernel.org
+Description:
+ The /sys/class/hidraw/hidraw*/device/speed file controls
+ reporting speed of Wacom bluetooth tablet. Reading from
+ this file returns 1 if tablet reports in high speed mode
+ or 0 otherwise. Writing to this file one of these values
+ switches reporting speed.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Attribute group for control of the status LEDs and the OLEDs.
+ This attribute group is only available for Intuos 4 M, L,
+ and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
+ Therefore its presence implicitly signifies the presence of
+ said LEDs and OLEDs on the tablet device.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets the status LED luminance (1..127)
+ when the stylus does not touch the tablet surface, and no
+ button is pressed on the stylus. This luminance level is
+ normally lower than the level when a button is pressed.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets the status LED luminance (1..127)
+ when the stylus touches the tablet surface, or any button is
+ pressed on the stylus.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets which one of the four (for Intuos 4)
+ or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
+ The other three LEDs on the same side are always inactive.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
+Date: September 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets which one of the left four (for Cintiq 21UX2)
+ status LEDs is active (0..3). The other three LEDs on the left are always
+ inactive.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ Writing to this file sets the overall luminance level (0..15)
+ of all eight button OLED displays.
+
+What: /sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
+Date: August 2011
+Contact: linux-input@vger.kernel.org
+Description:
+ When writing a 1024 byte raw image in Wacom Intuos 4
+ interleaving format to the file, the image shows up on Button N
+ of the device. The image is a 64x32 pixel 4-bit gray image. The
+ 1024 byte binary is split up into 16x 64 byte chunks. Each 64
+ byte chunk encodes the image data for two consecutive lines on
+ the display. The low nibble of each byte contains the first
+ line, and the high nibble contains the second line.