diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/sdhci-spear.txt | 21 | ||||
| -rw-r--r-- | arch/arm/boot/dts/spear300-evb.dts | 3 | ||||
| -rw-r--r-- | arch/arm/boot/dts/spear320-evb.dts | 2 | ||||
| -rw-r--r-- | drivers/mmc/host/sdhci-spear.c | 57 |
4 files changed, 77 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt new file mode 100644 index 00000000000..84d6e297908 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt @@ -0,0 +1,21 @@ +* SPEAr SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-spear driver. + +Required properties: +- compatible: "st,spear300-sdhci" + +Optional properties: +- cd-gpios: card detect gpio, with zero flags. + +If your board don't support these gpios then don't pass the entry. + +Example: + + sdhci@fc000000 { + compatible = "st,spear300-sdhci"; + reg = <0xfc000000 0x1000>; + + cd-gpios = <&gpio0 6 0> + }; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index d71b8d581e3..1e7c7a8e212 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -80,8 +80,7 @@ }; sdhci@70000000 { - int-gpio = <&gpio1 0 0>; - power-gpio = <&gpio1 2 1>; + cd-gpios = <&gpio1 0 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index e4e912f9502..082328bd64a 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -103,8 +103,6 @@ }; sdhci@70000000 { - power-gpio = <&gpio0 2 1>; - power_always_enb; status = "okay"; }; diff --git a/drivers/mmc/host/sdhci-spear.c b/drivers/mmc/host/sdhci-spear.c index 423da8194cd..ecad282741d 100644 --- a/drivers/mmc/host/sdhci-spear.c +++ b/drivers/mmc/host/sdhci-spear.c @@ -20,6 +20,8 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include <linux/platform_device.h> #include <linux/pm.h> #include <linux/slab.h> @@ -68,8 +70,42 @@ static irqreturn_t sdhci_gpio_irq(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_OF +static struct sdhci_plat_data * __devinit +sdhci_probe_config_dt(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct sdhci_plat_data *pdata = NULL; + int cd_gpio; + + cd_gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (!gpio_is_valid(cd_gpio)) + cd_gpio = -1; + + /* If pdata is required */ + if (cd_gpio != -1) { + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(&pdev->dev, "DT: kzalloc failed\n"); + return ERR_PTR(-ENOMEM); + } + } + + pdata->card_int_gpio = cd_gpio; + + return pdata; +} +#else +static struct sdhci_plat_data * __devinit +sdhci_probe_config_dt(struct platform_device *pdev) +{ + return ERR_PTR(-ENOSYS); +} +#endif + static int __devinit sdhci_probe(struct platform_device *pdev) { + struct device_node *np = pdev->dev.of_node; struct sdhci_host *host; struct resource *iomem; struct spear_sdhci *sdhci; @@ -110,8 +146,16 @@ static int __devinit sdhci_probe(struct platform_device *pdev) goto put_clk; } - /* overwrite platform_data */ - sdhci->data = dev_get_platdata(&pdev->dev); + if (np) { + sdhci->data = sdhci_probe_config_dt(pdev); + if (IS_ERR(sdhci->data)) { + dev_err(&pdev->dev, "DT: Failed to get pdata\n"); + return -ENODEV; + } + } else { + sdhci->data = dev_get_platdata(&pdev->dev); + } + pdev->dev.platform_data = sdhci; if (pdev->dev.parent) @@ -276,11 +320,20 @@ static int sdhci_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(sdhci_pm_ops, sdhci_suspend, sdhci_resume); +#ifdef CONFIG_OF +static const struct of_device_id sdhci_spear_id_table[] = { + { .compatible = "st,spear300-sdhci" }, + {} +}; +MODULE_DEVICE_TABLE(of, sdhci_spear_id_table); +#endif + static struct platform_driver sdhci_driver = { .driver = { .name = "sdhci", .owner = THIS_MODULE, .pm = &sdhci_pm_ops, + .of_match_table = of_match_ptr(sdhci_spear_id_table), }, .probe = sdhci_probe, .remove = __devexit_p(sdhci_remove), |