ARM: switch from NO_MACH_MEMORY_H to NEED_MACH_MEMORY_H

Given that we want the default to not have any <mach/memory.h> and given
that there are now fewer cases where it is still provided than the cases
where it is not at this point, this makes sense to invert the logic and
just identify the exception cases.

The word "need" instead of "have" was chosen to construct the config
symbol so not to suggest that having a mach/memory.h file is actually
a feature that one should aim for.

Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>

3 files changed, 24 insertions, 41 deletions

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 81148f41535..b7f7510658d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -211,14 +211,16 @@ config ARM_PATCH_PHYS_VIRT
 	  this feature (eg, building a kernel for a single machine) and
 	  you need to shrink the kernel to the minimal size.
 
-config NO_MACH_MEMORY_H
+config NEED_MACH_MEMORY_H
 	bool
 	help
-	  Select this when mach/memory.h is removed.
+	  Select this when mach/memory.h is required to provide special
+	  definitions for this platform.  The need for mach/memory.h should
+	  be avoided when possible.
 
 config PHYS_OFFSET
 	hex "Physical address of main memory"
-	depends on !ARM_PATCH_PHYS_VIRT && NO_MACH_MEMORY_H
+	depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H
 	help
 	  Please provide the physical address corresponding to the
 	  location of main memory in your system.
@@ -254,6 +256,7 @@ config ARCH_INTEGRATOR
 	select GENERIC_CLOCKEVENTS
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_FPGA_IRQ
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for ARM's Integrator platform.
 
@@ -269,6 +272,7 @@ config ARCH_REALVIEW
 	select PLAT_VERSATILE_CLCD
 	select ARM_TIMER_SP804
 	select GPIO_PL061 if GPIOLIB
+	select NEED_MACH_MEMORY_H
 	help
 	  This enables support for ARM Ltd RealView boards.
 
@@ -285,7 +289,6 @@ config ARCH_VERSATILE
 	select PLAT_VERSATILE_CLCD
 	select PLAT_VERSATILE_FPGA_IRQ
 	select ARM_TIMER_SP804
-	select NO_MACH_MEMORY_H
 	help
 	  This enables support for ARM Ltd Versatile board.
 
@@ -302,7 +305,6 @@ config ARCH_VEXPRESS
 	select ICST
 	select PLAT_VERSATILE
 	select PLAT_VERSATILE_CLCD
-	select NO_MACH_MEMORY_H
 	help
 	  This enables support for the ARM Ltd Versatile Express boards.
 
@@ -324,7 +326,6 @@ config ARCH_BCMRING
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_WANT_OPTIONAL_GPIOLIB
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Broadcom's BCMRing platform.
 
@@ -332,6 +333,7 @@ config ARCH_CLPS711X
 	bool "Cirrus Logic CLPS711x/EP721x-based"
 	select CPU_ARM720T
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Cirrus Logic 711x/721x based boards.
 
@@ -342,7 +344,6 @@ config ARCH_CNS3XXX
 	select ARM_GIC
 	select MIGHT_HAVE_PCI
 	select PCI_DOMAINS if PCI
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Cavium Networks CNS3XXX platform.
 
@@ -351,7 +352,6 @@ config ARCH_GEMINI
 	select CPU_FA526
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the Cortina Systems Gemini family SoCs
 
@@ -365,7 +365,6 @@ config ARCH_PRIMA2
 	select GENERIC_IRQ_CHIP
 	select USE_OF
 	select ZONE_DMA
-	select NO_MACH_MEMORY_H
 	help
           Support for CSR SiRFSoC ARM Cortex A9 Platform
 
@@ -375,6 +374,7 @@ config ARCH_EBSA110
 	select ISA
 	select NO_IOPORT
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  This is an evaluation board for the StrongARM processor available
 	  from Digital. It has limited hardware on-board, including an
@@ -390,6 +390,7 @@ config ARCH_EP93XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MEMORY_H
 	help
 	  This enables support for the Cirrus EP93xx series of CPUs.
 
@@ -398,6 +399,7 @@ config ARCH_FOOTBRIDGE
 	select CPU_SA110
 	select FOOTBRIDGE
 	select GENERIC_CLOCKEVENTS
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for systems based on the DC21285 companion chip
 	  ("FootBridge"), such as the Simtec CATS and the Rebel NetWinder.
@@ -410,7 +412,6 @@ config ARCH_MXC
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
 	select HAVE_SCHED_CLOCK
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Freescale MXC/iMX-based family of processors
 
@@ -420,7 +421,6 @@ config ARCH_MXS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Freescale MXS-based family of processors
 
@@ -430,7 +430,6 @@ config ARCH_NETX
 	select CPU_ARM926T
 	select ARM_VIC
 	select GENERIC_CLOCKEVENTS
-	select NO_MACH_MEMORY_H
 	help
 	  This enables support for systems based on the Hilscher NetX Soc
 
@@ -439,7 +438,6 @@ config ARCH_H720X
 	select CPU_ARM720T
 	select ISA_DMA_API
 	select ARCH_USES_GETTIMEOFFSET
-	select NO_MACH_MEMORY_H
 	help
 	  This enables support for systems based on the Hynix HMS720x
 
@@ -451,6 +449,7 @@ config ARCH_IOP13XX
 	select PCI
 	select ARCH_SUPPORTS_MSI
 	select VMSPLIT_1G
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -461,7 +460,6 @@ config ARCH_IOP32X
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Intel's 80219 and IOP32X (XScale) family of
 	  processors.
@@ -473,7 +471,6 @@ config ARCH_IOP33X
 	select PLAT_IOP
 	select PCI
 	select ARCH_REQUIRE_GPIOLIB
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Intel's IOP33X (XScale) family of processors.
 
@@ -483,6 +480,7 @@ config ARCH_IXP23XX
 	select CPU_XSC3
  	select PCI
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Intel's IXP23xx (XScale) family of processors.
 
@@ -492,6 +490,7 @@ config ARCH_IXP2000
 	select CPU_XSCALE
 	select PCI
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Intel's IXP2400/2800 (XScale) family of processors.
 
@@ -505,7 +504,6 @@ config ARCH_IXP4XX
 	select HAVE_SCHED_CLOCK
 	select MIGHT_HAVE_PCI
 	select DMABOUNCE if PCI
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -516,7 +514,6 @@ config ARCH_DOVE
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the Marvell Dove SoC 88AP510
 
@@ -527,7 +524,6 @@ config ARCH_KIRKWOOD
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the following Marvell Kirkwood series SoCs:
 	  88F6180, 88F6192 and 88F6281.
@@ -543,7 +539,6 @@ config ARCH_LPC32XX
 	select CLKDEV_LOOKUP
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the NXP LPC32XX family of processors
 
@@ -554,7 +549,6 @@ config ARCH_MV78XX0
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the following Marvell MV78xx0 series SoCs:
 	  MV781x0, MV782x0.
@@ -567,7 +561,6 @@ config ARCH_ORION5X
 	select ARCH_REQUIRE_GPIOLIB
 	select GENERIC_CLOCKEVENTS
 	select PLAT_ORION
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the following Marvell Orion 5x series SoCs:
 	  Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182),
@@ -583,7 +576,6 @@ config ARCH_MMP
 	select TICK_ONESHOT
 	select PLAT_PXA
 	select SPARSE_IRQ
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line.
 
@@ -592,6 +584,7 @@ config ARCH_KS8695
 	select CPU_ARM922T
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based
 	  System-on-Chip devices.
@@ -603,7 +596,6 @@ config ARCH_W90X900
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Nuvoton (Winbond logic dept.) ARM9 processor,
 	  At present, the w90x900 has been renamed nuc900, regarding
@@ -617,7 +609,6 @@ config ARCH_NUC93X
 	bool "Nuvoton NUC93X CPU"
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Nuvoton (Winbond logic dept.) NUC93X MCU,The NUC93X is a
 	  low-power and high performance MPEG-4/JPEG multimedia controller chip.
@@ -632,7 +623,6 @@ config ARCH_TEGRA
 	select HAVE_CLK
 	select HAVE_SCHED_CLOCK
 	select ARCH_HAS_CPUFREQ
-	select NO_MACH_MEMORY_H
 	help
 	  This enables support for NVIDIA Tegra based systems (Tegra APX,
 	  Tegra 6xx and Tegra 2 series).
@@ -642,7 +632,6 @@ config ARCH_PNX4008
 	select CPU_ARM926T
 	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
-	select NO_MACH_MEMORY_H
 	help
 	  This enables support for Philips PNX4008 mobile platform.
 
@@ -661,7 +650,6 @@ config ARCH_PXA
 	select SPARSE_IRQ
 	select AUTO_ZRELADDR
 	select MULTI_IRQ_HANDLER
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
 
@@ -671,7 +659,6 @@ config ARCH_MSM
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Qualcomm MSM/QSD based systems.  This runs on the
 	  apps processor of the MSM/QSD and depends on a shared memory
@@ -689,6 +676,7 @@ config ARCH_SHMOBILE
 	select SPARSE_IRQ
 	select MULTI_IRQ_HANDLER
 	select PM_GENERIC_DOMAINS if PM
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for Renesas's SH-Mobile and R-Mobile ARM platforms.
 
@@ -703,6 +691,7 @@ config ARCH_RPC
 	select NO_IOPORT
 	select ARCH_SPARSEMEM_ENABLE
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
@@ -721,6 +710,7 @@ config ARCH_SA1100
 	select HAVE_SCHED_CLOCK
 	select TICK_ONESHOT
 	select ARCH_REQUIRE_GPIOLIB
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for StrongARM 11x0 based boards.
 
@@ -732,7 +722,6 @@ config ARCH_S3C2410
 	select CLKDEV_LOOKUP
 	select ARCH_USES_GETTIMEOFFSET
 	select HAVE_S3C2410_I2C if I2C
-	select NO_MACH_MEMORY_H
 	help
 	  Samsung S3C2410X CPU based systems, such as the Simtec Electronics
 	  BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or
@@ -765,7 +754,6 @@ config ARCH_S3C64XX
 	select SAMSUNG_GPIOLIB_4BIT
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select NO_MACH_MEMORY_H
 	help
 	  Samsung S3C64XX series based systems
 
@@ -781,7 +769,6 @@ config ARCH_S5P64X0
 	select HAVE_SCHED_CLOCK
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
-	select NO_MACH_MEMORY_H
 	help
 	  Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440,
 	  SMDK6450.
@@ -797,7 +784,6 @@ config ARCH_S5PC100
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
-	select NO_MACH_MEMORY_H
 	help
 	  Samsung S5PC100 series based systems
 
@@ -817,6 +803,7 @@ config ARCH_S5PV210
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_MEMORY_H
 	help
 	  Samsung S5PV210/S5PC110 series based systems
 
@@ -833,6 +820,7 @@ config ARCH_EXYNOS4
 	select HAVE_S3C_RTC if RTC_CLASS
 	select HAVE_S3C2410_I2C if I2C
 	select HAVE_S3C2410_WATCHDOG if WATCHDOG
+	select NEED_MACH_MEMORY_H
 	help
 	  Samsung EXYNOS4 series based systems
 
@@ -844,6 +832,7 @@ config ARCH_SHARK
 	select ZONE_DMA
 	select PCI
 	select ARCH_USES_GETTIMEOFFSET
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
@@ -855,7 +844,6 @@ config ARCH_TCC_926
 	select HAVE_CLK
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Telechips TCC ARM926-based systems.
 
@@ -872,6 +860,7 @@ config ARCH_U300
 	select CLKDEV_LOOKUP
 	select HAVE_MACH_CLKDEV
 	select GENERIC_GPIO
+	select NEED_MACH_MEMORY_H
 	help
 	  Support for ST-Ericsson U300 series mobile platforms.
 
@@ -883,7 +872,6 @@ config ARCH_U8500
 	select CLKDEV_LOOKUP
 	select ARCH_REQUIRE_GPIOLIB
 	select ARCH_HAS_CPUFREQ
-	select NO_MACH_MEMORY_H
 	help
 	  Support for ST-Ericsson's Ux500 architecture
 
@@ -895,7 +883,6 @@ config ARCH_NOMADIK
 	select CLKDEV_LOOKUP
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
-	select NO_MACH_MEMORY_H
 	help
 	  Support for the Nomadik platform by ST-Ericsson
 
@@ -909,7 +896,6 @@ config ARCH_DAVINCI
 	select GENERIC_ALLOCATOR
 	select GENERIC_IRQ_CHIP
 	select ARCH_HAS_HOLES_MEMORYMODEL
-	select NO_MACH_MEMORY_H
 	help
 	  Support for TI's DaVinci platform.
 
@@ -933,7 +919,6 @@ config PLAT_SPEAR
 	select CLKSRC_MMIO
 	select GENERIC_CLOCKEVENTS
 	select HAVE_CLK
-	select NO_MACH_MEMORY_H
 	help
 	  Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx).
 
@@ -945,7 +930,6 @@ config ARCH_VT8500
 	select GENERIC_CLOCKEVENTS
 	select ARCH_REQUIRE_GPIOLIB
 	select HAVE_PWM
-	select NO_MACH_MEMORY_H
 	help
 	  Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip.
 
@@ -959,7 +943,6 @@ config ARCH_ZYNQ
 	select ARM_AMBA
 	select ICST
 	select USE_OF
-	select NO_MACH_MEMORY_H
 	help
 	  Support for Xilinx Zynq ARM Cortex A9 Platform
 endchoice
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 046c915694c..a8997d71084 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -18,7 +18,7 @@
 #include <linux/types.h>
 #include <asm/sizes.h>
 
-#ifndef CONFIG_NO_MACH_MEMORY_H
+#ifdef CONFIG_NEED_MACH_MEMORY_H
 #include <mach/memory.h>
 #endif
 
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index e00fe764045..95732af7b20 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -14,6 +14,7 @@ config ARCH_OMAP1
 	select CLKDEV_LOOKUP
 	select CLKSRC_MMIO
 	select GENERIC_IRQ_CHIP
+	select NEED_MACH_MEMORY_H
 	help
 	  "Systems based on omap7xx, omap15xx or omap16xx"
 
@@ -22,7 +23,6 @@ config ARCH_OMAP2PLUS
 	select CLKDEV_LOOKUP
 	select GENERIC_IRQ_CHIP
 	select OMAP_DM_TIMER
-	select NO_MACH_MEMORY_H
 	help
 	  "Systems based on OMAP2, OMAP3 or OMAP4"