aboutsummaryrefslogtreecommitdiff
path: root/arch/powerpc/oprofile
diff options
context:
space:
mode:
authorCarl Love <cel@us.ibm.com>2008-12-01 16:18:34 -0800
committerRobert Richter <robert.richter@amd.com>2009-01-08 15:49:39 +0100
commit9b93418e7ee59dbc96d44cfde7f65f886e54dba9 (patch)
tree39f2e913f17b3a9dc50b6af39a32489a735ce3a6 /arch/powerpc/oprofile
parent4a6908a3a050aacc9c3a2f36b276b46c0629ad91 (diff)
downloadlinaro-lsk-9b93418e7ee59dbc96d44cfde7f65f886e54dba9.tar.gz
powerpc/oprofile: IBM CELL: cleanup and restructuring
This patch restructures and cleans up the code a bit to make it easier to add new functionality later. The patch makes no functional changes to the existing code. Signed-off-by: Carl Love <carll@us.ibm.com> Signed-off-by: Robert Richter <robert.richter@amd.com>
Diffstat (limited to 'arch/powerpc/oprofile')
-rw-r--r--arch/powerpc/oprofile/cell/spu_profiler.c24
-rw-r--r--arch/powerpc/oprofile/op_model_cell.c320
2 files changed, 191 insertions, 153 deletions
diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c
index dd499c3e9da..8b1b9ccaff9 100644
--- a/arch/powerpc/oprofile/cell/spu_profiler.c
+++ b/arch/powerpc/oprofile/cell/spu_profiler.c
@@ -31,8 +31,8 @@ static unsigned int profiling_interval;
#define SPU_PC_MASK 0xFFFF
-static DEFINE_SPINLOCK(sample_array_lock);
-unsigned long sample_array_lock_flags;
+static DEFINE_SPINLOCK(oprof_spu_smpl_arry_lck);
+unsigned long oprof_spu_smpl_arry_lck_flags;
void set_spu_profiling_frequency(unsigned int freq_khz, unsigned int cycles_reset)
{
@@ -145,13 +145,13 @@ static enum hrtimer_restart profile_spus(struct hrtimer *timer)
* sample array must be loaded and then processed for a given
* cpu. The sample array is not per cpu.
*/
- spin_lock_irqsave(&sample_array_lock,
- sample_array_lock_flags);
+ spin_lock_irqsave(&oprof_spu_smpl_arry_lck,
+ oprof_spu_smpl_arry_lck_flags);
num_samples = cell_spu_pc_collection(cpu);
if (num_samples == 0) {
- spin_unlock_irqrestore(&sample_array_lock,
- sample_array_lock_flags);
+ spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
+ oprof_spu_smpl_arry_lck_flags);
continue;
}
@@ -162,8 +162,8 @@ static enum hrtimer_restart profile_spus(struct hrtimer *timer)
num_samples);
}
- spin_unlock_irqrestore(&sample_array_lock,
- sample_array_lock_flags);
+ spin_unlock_irqrestore(&oprof_spu_smpl_arry_lck,
+ oprof_spu_smpl_arry_lck_flags);
}
smp_wmb(); /* insure spu event buffer updates are written */
@@ -182,13 +182,13 @@ static enum hrtimer_restart profile_spus(struct hrtimer *timer)
static struct hrtimer timer;
/*
- * Entry point for SPU profiling.
+ * Entry point for SPU cycle profiling.
* NOTE: SPU profiling is done system-wide, not per-CPU.
*
* cycles_reset is the count value specified by the user when
* setting up OProfile to count SPU_CYCLES.
*/
-int start_spu_profiling(unsigned int cycles_reset)
+int start_spu_profiling_cycles(unsigned int cycles_reset)
{
ktime_t kt;
@@ -212,10 +212,10 @@ int start_spu_profiling(unsigned int cycles_reset)
return 0;
}
-void stop_spu_profiling(void)
+void stop_spu_profiling_cycles(void)
{
spu_prof_running = 0;
hrtimer_cancel(&timer);
kfree(samples);
- pr_debug("SPU_PROF: stop_spu_profiling issued\n");
+ pr_debug("SPU_PROF: stop_spu_profiling_cycles issued\n");
}
diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c
index 25a4ec2514a..ad7f32c848f 100644
--- a/arch/powerpc/oprofile/op_model_cell.c
+++ b/arch/powerpc/oprofile/op_model_cell.c
@@ -40,14 +40,9 @@
#include "../platforms/cell/interrupt.h"
#include "cell/pr_util.h"
-static void cell_global_stop_spu(void);
-
-/*
- * spu_cycle_reset is the number of cycles between samples.
- * This variable is used for SPU profiling and should ONLY be set
- * at the beginning of cell_reg_setup; otherwise, it's read-only.
- */
-static unsigned int spu_cycle_reset;
+#define PPU_PROFILING 0
+#define SPU_PROFILING_CYCLES 1
+#define SPU_PROFILING_EVENTS 2
#define NUM_SPUS_PER_NODE 8
#define SPU_CYCLES_EVENT_NUM 2 /* event number for SPU_CYCLES */
@@ -66,6 +61,14 @@ static unsigned int spu_cycle_reset;
#define MAX_SPU_COUNT 0xFFFFFF /* maximum 24 bit LFSR value */
+/*
+ * spu_cycle_reset is the number of cycles between samples.
+ * This variable is used for SPU profiling and should ONLY be set
+ * at the beginning of cell_reg_setup; otherwise, it's read-only.
+ */
+static unsigned int spu_cycle_reset;
+static unsigned int profiling_mode;
+
struct pmc_cntrl_data {
unsigned long vcntr;
unsigned long evnts;
@@ -122,7 +125,6 @@ static struct {
#define GET_INPUT_CONTROL(x) ((x & 0x00000004) >> 2)
static DEFINE_PER_CPU(unsigned long[NR_PHYS_CTRS], pmc_values);
-
static struct pmc_cntrl_data pmc_cntrl[NUM_THREADS][NR_PHYS_CTRS];
/*
@@ -165,7 +167,7 @@ static int spu_rtas_token; /* token for SPU cycle profiling */
static u32 reset_value[NR_PHYS_CTRS];
static int num_counters;
static int oprofile_running;
-static DEFINE_SPINLOCK(virt_cntr_lock);
+static DEFINE_SPINLOCK(cntr_lock);
static u32 ctr_enabled;
@@ -367,7 +369,7 @@ static void write_pm_cntrl(int cpu)
if (pm_regs.pm_cntrl.stop_at_max == 1)
val |= CBE_PM_STOP_AT_MAX;
- if (pm_regs.pm_cntrl.trace_mode == 1)
+ if (pm_regs.pm_cntrl.trace_mode != 0)
val |= CBE_PM_TRACE_MODE_SET(pm_regs.pm_cntrl.trace_mode);
if (pm_regs.pm_cntrl.freeze == 1)
@@ -441,7 +443,7 @@ static void cell_virtual_cntr(unsigned long data)
* not both playing with the counters on the same node.
*/
- spin_lock_irqsave(&virt_cntr_lock, flags);
+ spin_lock_irqsave(&cntr_lock, flags);
prev_hdw_thread = hdw_thread;
@@ -527,7 +529,7 @@ static void cell_virtual_cntr(unsigned long data)
cbe_enable_pm(cpu);
}
- spin_unlock_irqrestore(&virt_cntr_lock, flags);
+ spin_unlock_irqrestore(&cntr_lock, flags);
mod_timer(&timer_virt_cntr, jiffies + HZ / 10);
}
@@ -541,44 +543,30 @@ static void start_virt_cntrs(void)
add_timer(&timer_virt_cntr);
}
-/* This function is called once for all cpus combined */
-static int cell_reg_setup(struct op_counter_config *ctr,
+static int cell_reg_setup_spu_cycles(struct op_counter_config *ctr,
struct op_system_config *sys, int num_ctrs)
{
- int i, j, cpu;
- spu_cycle_reset = 0;
-
- if (ctr[0].event == SPU_CYCLES_EVENT_NUM) {
- spu_cycle_reset = ctr[0].count;
-
- /*
- * Each node will need to make the rtas call to start
- * and stop SPU profiling. Get the token once and store it.
- */
- spu_rtas_token = rtas_token("ibm,cbe-spu-perftools");
-
- if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
- printk(KERN_ERR
- "%s: rtas token ibm,cbe-spu-perftools unknown\n",
- __func__);
- return -EIO;
- }
- }
-
- pm_rtas_token = rtas_token("ibm,cbe-perftools");
+ spu_cycle_reset = ctr[0].count;
/*
- * For all events excetp PPU CYCLEs, each node will need to make
- * the rtas cbe-perftools call to setup and reset the debug bus.
- * Make the token lookup call once and store it in the global
- * variable pm_rtas_token.
+ * Each node will need to make the rtas call to start
+ * and stop SPU profiling. Get the token once and store it.
*/
- if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
+ spu_rtas_token = rtas_token("ibm,cbe-spu-perftools");
+
+ if (unlikely(spu_rtas_token == RTAS_UNKNOWN_SERVICE)) {
printk(KERN_ERR
- "%s: rtas token ibm,cbe-perftools unknown\n",
+ "%s: rtas token ibm,cbe-spu-perftools unknown\n",
__func__);
return -EIO;
}
+ return 0;
+}
+
+static int cell_reg_setup_ppu(struct op_counter_config *ctr,
+ struct op_system_config *sys, int num_ctrs)
+{
+ int i, j, cpu;
num_counters = num_ctrs;
@@ -665,6 +653,41 @@ static int cell_reg_setup(struct op_counter_config *ctr,
}
+/* This function is called once for all cpus combined */
+static int cell_reg_setup(struct op_counter_config *ctr,
+ struct op_system_config *sys, int num_ctrs)
+{
+ int ret;
+
+ spu_cycle_reset = 0;
+
+ /*
+ * For all events except PPU CYCLEs, each node will need to make
+ * the rtas cbe-perftools call to setup and reset the debug bus.
+ * Make the token lookup call once and store it in the global
+ * variable pm_rtas_token.
+ */
+ pm_rtas_token = rtas_token("ibm,cbe-perftools");
+
+ if (unlikely(pm_rtas_token == RTAS_UNKNOWN_SERVICE)) {
+ printk(KERN_ERR
+ "%s: rtas token ibm,cbe-perftools unknown\n",
+ __func__);
+ return -EIO;
+ }
+
+ if (ctr[0].event == SPU_CYCLES_EVENT_NUM) {
+ profiling_mode = SPU_PROFILING_CYCLES;
+ ret = cell_reg_setup_spu_cycles(ctr, sys, num_ctrs);
+ } else {
+ profiling_mode = PPU_PROFILING;
+ ret = cell_reg_setup_ppu(ctr, sys, num_ctrs);
+ }
+
+ return ret;
+}
+
+
/* This function is called once for each cpu */
static int cell_cpu_setup(struct op_counter_config *cntr)
@@ -673,7 +696,11 @@ static int cell_cpu_setup(struct op_counter_config *cntr)
u32 num_enabled = 0;
int i;
- if (spu_cycle_reset)
+ /* Cycle based SPU profiling does not use the performance
+ * counters. The trace array is configured to collect
+ * the data.
+ */
+ if (profiling_mode == SPU_PROFILING_CYCLES)
return 0;
/* There is one performance monitor per processor chip (i.e. node),
@@ -686,7 +713,6 @@ static int cell_cpu_setup(struct op_counter_config *cntr)
cbe_disable_pm(cpu);
cbe_disable_pm_interrupts(cpu);
- cbe_write_pm(cpu, pm_interval, 0);
cbe_write_pm(cpu, pm_start_stop, 0);
cbe_write_pm(cpu, group_control, pm_regs.group_control);
cbe_write_pm(cpu, debug_bus_control, pm_regs.debug_bus_control);
@@ -885,7 +911,94 @@ static struct notifier_block cpu_freq_notifier_block = {
};
#endif
-static int cell_global_start_spu(struct op_counter_config *ctr)
+/*
+ * Note the generic OProfile stop calls do not support returning
+ * an error on stop. Hence, will not return an error if the FW
+ * calls fail on stop. Failure to reset the debug bus is not an issue.
+ * Failure to disable the SPU profiling is not an issue. The FW calls
+ * to enable the performance counters and debug bus will work even if
+ * the hardware was not cleanly reset.
+ */
+static void cell_global_stop_spu_cycles(void)
+{
+ int subfunc, rtn_value;
+ unsigned int lfsr_value;
+ int cpu;
+
+ oprofile_running = 0;
+
+#ifdef CONFIG_CPU_FREQ
+ cpufreq_unregister_notifier(&cpu_freq_notifier_block,
+ CPUFREQ_TRANSITION_NOTIFIER);
+#endif
+
+ for_each_online_cpu(cpu) {
+ if (cbe_get_hw_thread_id(cpu))
+ continue;
+
+ subfunc = 3; /*
+ * 2 - activate SPU tracing,
+ * 3 - deactivate
+ */
+ lfsr_value = 0x8f100000;
+
+ rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL,
+ subfunc, cbe_cpu_to_node(cpu),
+ lfsr_value);
+
+ if (unlikely(rtn_value != 0)) {
+ printk(KERN_ERR
+ "%s: rtas call ibm,cbe-spu-perftools " \
+ "failed, return = %d\n",
+ __func__, rtn_value);
+ }
+
+ /* Deactivate the signals */
+ pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
+ }
+
+ if (profiling_mode == SPU_PROFILING_CYCLES)
+ stop_spu_profiling_cycles();
+}
+
+static void cell_global_stop_ppu(void)
+{
+ int cpu;
+
+ /*
+ * This routine will be called once for the system.
+ * There is one performance monitor per node, so we
+ * only need to perform this function once per node.
+ */
+ del_timer_sync(&timer_virt_cntr);
+ oprofile_running = 0;
+ smp_wmb();
+
+ for_each_online_cpu(cpu) {
+ if (cbe_get_hw_thread_id(cpu))
+ continue;
+
+ cbe_sync_irq(cbe_cpu_to_node(cpu));
+ /* Stop the counters */
+ cbe_disable_pm(cpu);
+
+ /* Deactivate the signals */
+ pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
+
+ /* Deactivate interrupts */
+ cbe_disable_pm_interrupts(cpu);
+ }
+}
+
+static void cell_global_stop(void)
+{
+ if (profiling_mode == PPU_PROFILING)
+ cell_global_stop_ppu();
+ else
+ cell_global_stop_spu_cycles();
+}
+
+static int cell_global_start_spu_cycles(struct op_counter_config *ctr)
{
int subfunc;
unsigned int lfsr_value;
@@ -955,14 +1068,14 @@ static int cell_global_start_spu(struct op_counter_config *ctr)
if (unlikely(ret != 0)) {
printk(KERN_ERR
- "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __func__, ret);
+ "%s: rtas call ibm,cbe-spu-perftools failed, " \
+ "return = %d\n", __func__, ret);
rtas_error = -EIO;
goto out;
}
}
- rtas_error = start_spu_profiling(spu_cycle_reset);
+ rtas_error = start_spu_profiling_cycles(spu_cycle_reset);
if (rtas_error)
goto out_stop;
@@ -970,7 +1083,7 @@ static int cell_global_start_spu(struct op_counter_config *ctr)
return 0;
out_stop:
- cell_global_stop_spu(); /* clean up the PMU/debug bus */
+ cell_global_stop_spu_cycles(); /* clean up the PMU/debug bus */
out:
return rtas_error;
}
@@ -1024,99 +1137,15 @@ static int cell_global_start_ppu(struct op_counter_config *ctr)
static int cell_global_start(struct op_counter_config *ctr)
{
- if (spu_cycle_reset)
- return cell_global_start_spu(ctr);
+ if (profiling_mode == SPU_PROFILING_CYCLES)
+ return cell_global_start_spu_cycles(ctr);
else
return cell_global_start_ppu(ctr);
}
-/*
- * Note the generic OProfile stop calls do not support returning
- * an error on stop. Hence, will not return an error if the FW
- * calls fail on stop. Failure to reset the debug bus is not an issue.
- * Failure to disable the SPU profiling is not an issue. The FW calls
- * to enable the performance counters and debug bus will work even if
- * the hardware was not cleanly reset.
- */
-static void cell_global_stop_spu(void)
-{
- int subfunc, rtn_value;
- unsigned int lfsr_value;
- int cpu;
-
- oprofile_running = 0;
-#ifdef CONFIG_CPU_FREQ
- cpufreq_unregister_notifier(&cpu_freq_notifier_block,
- CPUFREQ_TRANSITION_NOTIFIER);
-#endif
-
- for_each_online_cpu(cpu) {
- if (cbe_get_hw_thread_id(cpu))
- continue;
-
- subfunc = 3; /*
- * 2 - activate SPU tracing,
- * 3 - deactivate
- */
- lfsr_value = 0x8f100000;
-
- rtn_value = rtas_call(spu_rtas_token, 3, 1, NULL,
- subfunc, cbe_cpu_to_node(cpu),
- lfsr_value);
-
- if (unlikely(rtn_value != 0)) {
- printk(KERN_ERR
- "%s: rtas call ibm,cbe-spu-perftools failed, return = %d\n",
- __func__, rtn_value);
- }
-
- /* Deactivate the signals */
- pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
- }
-
- stop_spu_profiling();
-}
-
-static void cell_global_stop_ppu(void)
-{
- int cpu;
-
- /*
- * This routine will be called once for the system.
- * There is one performance monitor per node, so we
- * only need to perform this function once per node.
- */
- del_timer_sync(&timer_virt_cntr);
- oprofile_running = 0;
- smp_wmb();
-
- for_each_online_cpu(cpu) {
- if (cbe_get_hw_thread_id(cpu))
- continue;
-
- cbe_sync_irq(cbe_cpu_to_node(cpu));
- /* Stop the counters */
- cbe_disable_pm(cpu);
-
- /* Deactivate the signals */
- pm_rtas_reset_signals(cbe_cpu_to_node(cpu));
-
- /* Deactivate interrupts */
- cbe_disable_pm_interrupts(cpu);
- }
-}
-
-static void cell_global_stop(void)
-{
- if (spu_cycle_reset)
- cell_global_stop_spu();
- else
- cell_global_stop_ppu();
-}
-
-static void cell_handle_interrupt(struct pt_regs *regs,
- struct op_counter_config *ctr)
+static void cell_handle_interrupt_ppu(struct pt_regs *regs,
+ struct op_counter_config *ctr)
{
u32 cpu;
u64 pc;
@@ -1132,7 +1161,7 @@ static void cell_handle_interrupt(struct pt_regs *regs,
* routine are not running at the same time. See the
* cell_virtual_cntr() routine for additional comments.
*/
- spin_lock_irqsave(&virt_cntr_lock, flags);
+ spin_lock_irqsave(&cntr_lock, flags);
/*
* Need to disable and reenable the performance counters
@@ -1185,7 +1214,14 @@ static void cell_handle_interrupt(struct pt_regs *regs,
*/
cbe_enable_pm(cpu);
}
- spin_unlock_irqrestore(&virt_cntr_lock, flags);
+ spin_unlock_irqrestore(&cntr_lock, flags);
+}
+
+static void cell_handle_interrupt(struct pt_regs *regs,
+ struct op_counter_config *ctr)
+{
+ if (profiling_mode == PPU_PROFILING)
+ cell_handle_interrupt_ppu(regs, ctr);
}
/*
@@ -1195,7 +1231,8 @@ static void cell_handle_interrupt(struct pt_regs *regs,
*/
static int cell_sync_start(void)
{
- if (spu_cycle_reset)
+ if ((profiling_mode == SPU_PROFILING_CYCLES) ||
+ (profiling_mode == SPU_PROFILING_EVENTS))
return spu_sync_start();
else
return DO_GENERIC_SYNC;
@@ -1203,7 +1240,8 @@ static int cell_sync_start(void)
static int cell_sync_stop(void)
{
- if (spu_cycle_reset)
+ if ((profiling_mode == SPU_PROFILING_CYCLES) ||
+ (profiling_mode == SPU_PROFILING_EVENTS))
return spu_sync_stop();
else
return 1;