[PATCH] powerpc: merge the rest of arch/ppc*/oprofile

- merge common.c
- move model specific files
- remove stub Makefiles
- clean up arch/ppc*/Makefile

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

1 files changed, 183 insertions, 0 deletions

diff --git a/arch/powerpc/oprofile/op_model_fsl_booke.c b/arch/powerpc/oprofile/op_model_fsl_booke.c
new file mode 100644
index 00000000000..1917f8df8a8
--- /dev/null
+++ b/arch/powerpc/oprofile/op_model_fsl_booke.c
@@ -0,0 +1,183 @@
+/*
+ * oprofile/op_model_e500.c
+ *
+ * Freescale Book-E oprofile support, based on ppc64 oprofile support
+ * Copyright (C) 2004 Anton Blanchard <anton@au.ibm.com>, IBM
+ *
+ * Copyright (c) 2004 Freescale Semiconductor, Inc
+ *
+ * Author: Andy Fleming
+ * Maintainer: Kumar Gala <Kumar.Gala@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/oprofile.h>
+#include <linux/init.h>
+#include <linux/smp.h>
+#include <asm/ptrace.h>
+#include <asm/system.h>
+#include <asm/processor.h>
+#include <asm/cputable.h>
+#include <asm/reg_booke.h>
+#include <asm/page.h>
+#include <asm/perfmon.h>
+#include <asm/oprofile_impl.h>
+
+static unsigned long reset_value[OP_MAX_COUNTER];
+
+static int num_counters;
+static int oprofile_running;
+
+static inline unsigned int ctr_read(unsigned int i)
+{
+	switch(i) {
+		case 0:
+			return mfpmr(PMRN_PMC0);
+		case 1:
+			return mfpmr(PMRN_PMC1);
+		case 2:
+			return mfpmr(PMRN_PMC2);
+		case 3:
+			return mfpmr(PMRN_PMC3);
+		default:
+			return 0;
+	}
+}
+
+static inline void ctr_write(unsigned int i, unsigned int val)
+{
+	switch(i) {
+		case 0:
+			mtpmr(PMRN_PMC0, val);
+			break;
+		case 1:
+			mtpmr(PMRN_PMC1, val);
+			break;
+		case 2:
+			mtpmr(PMRN_PMC2, val);
+			break;
+		case 3:
+			mtpmr(PMRN_PMC3, val);
+			break;
+		default:
+			break;
+	}
+}
+
+
+static void fsl_booke_reg_setup(struct op_counter_config *ctr,
+			     struct op_system_config *sys,
+			     int num_ctrs)
+{
+	int i;
+
+	num_counters = num_ctrs;
+
+	/* freeze all counters */
+	pmc_stop_ctrs();
+
+	/* Our counters count up, and "count" refers to
+	 * how much before the next interrupt, and we interrupt
+	 * on overflow.  So we calculate the starting value
+	 * which will give us "count" until overflow.
+	 * Then we set the events on the enabled counters */
+	for (i = 0; i < num_counters; ++i) {
+		reset_value[i] = 0x80000000UL - ctr[i].count;
+
+		init_pmc_stop(i);
+
+		set_pmc_event(i, ctr[i].event);
+
+		set_pmc_user_kernel(i, ctr[i].user, ctr[i].kernel);
+	}
+}
+
+static void fsl_booke_start(struct op_counter_config *ctr)
+{
+	int i;
+
+	mtmsr(mfmsr() | MSR_PMM);
+
+	for (i = 0; i < num_counters; ++i) {
+		if (ctr[i].enabled) {
+			ctr_write(i, reset_value[i]);
+			/* Set Each enabled counterd to only
+			 * count when the Mark bit is not set */
+			set_pmc_marked(i, 1, 0);
+			pmc_start_ctr(i, 1);
+		} else {
+			ctr_write(i, 0);
+
+			/* Set the ctr to be stopped */
+			pmc_start_ctr(i, 0);
+		}
+	}
+
+	/* Clear the freeze bit, and enable the interrupt.
+	 * The counters won't actually start until the rfi clears
+	 * the PMM bit */
+	pmc_start_ctrs(1);
+
+	oprofile_running = 1;
+
+	pr_debug("start on cpu %d, pmgc0 %x\n", smp_processor_id(),
+			mfpmr(PMRN_PMGC0));
+}
+
+static void fsl_booke_stop(void)
+{
+	/* freeze counters */
+	pmc_stop_ctrs();
+
+	oprofile_running = 0;
+
+	pr_debug("stop on cpu %d, pmgc0 %x\n", smp_processor_id(),
+			mfpmr(PMRN_PMGC0));
+
+	mb();
+}
+
+
+static void fsl_booke_handle_interrupt(struct pt_regs *regs,
+				    struct op_counter_config *ctr)
+{
+	unsigned long pc;
+	int is_kernel;
+	int val;
+	int i;
+
+	/* set the PMM bit (see comment below) */
+	mtmsr(mfmsr() | MSR_PMM);
+
+	pc = regs->nip;
+	is_kernel = (pc >= KERNELBASE);
+
+	for (i = 0; i < num_counters; ++i) {
+		val = ctr_read(i);
+		if (val < 0) {
+			if (oprofile_running && ctr[i].enabled) {
+				oprofile_add_pc(pc, is_kernel, i);
+				ctr_write(i, reset_value[i]);
+			} else {
+				ctr_write(i, 0);
+			}
+		}
+	}
+
+	/* The freeze bit was set by the interrupt. */
+	/* Clear the freeze bit, and reenable the interrupt.
+	 * The counters won't actually start until the rfi clears
+	 * the PMM bit */
+	pmc_start_ctrs(1);
+}
+
+struct op_powerpc_model op_model_fsl_booke = {
+	.reg_setup		= fsl_booke_reg_setup,
+	.start			= fsl_booke_start,
+	.stop			= fsl_booke_stop,
+	.handle_interrupt	= fsl_booke_handle_interrupt,
+};