powerpc/85xx: Rename p2040_rdb.c to p2041_rdb.c

There's only p2041rdb board for official release, but the p2041 silicon
on the board can be converted to p2040 silicon without XAUI and L2 cache
function, then the board becomes p2040rdb board. so we use the file name
p2041_rdb.c to handle P2040RDB board and P2041RDB board which is also
consistent with the board name under U-Boot.

During the rename we make few other minor changes to the device tree:
* Move USB phy setting into p2041si.dtsi as its SoC not board defined
* Convert PCI clock-frequency to decimal to be more readable

Signed-off-by: Mingkai Hu <Mingkai.hu@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

2 files changed, 36 insertions, 41 deletions

diff --git a/arch/powerpc/boot/dts/p2040rdb.dts b/arch/powerpc/boot/dts/p2041rdb.dts
index 7d84e391c63..47bb461cf72 100644
--- a/arch/powerpc/boot/dts/p2040rdb.dts
+++ b/arch/powerpc/boot/dts/p2041rdb.dts
@@ -1,5 +1,5 @@
 /*
- * P2040RDB Device Tree Source
+ * P2041RDB Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -32,11 +32,11 @@
  * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-/include/ "p2040si.dtsi"
+/include/ "p2041si.dtsi"
 
 / {
-	model = "fsl,P2040RDB";
-	compatible = "fsl,P2040RDB";
+	model = "fsl,P2041RDB";
+	compatible = "fsl,P2041RDB";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
@@ -97,13 +97,8 @@
 			};
 		};
 
-		usb0: usb@210000 {
-			phy_type = "utmi";
-		};
-
 		usb1: usb@211000 {
 			dr_mode = "host";
-			phy_type = "utmi";
 		};
 	};
 
diff --git a/arch/powerpc/boot/dts/p2040si.dtsi b/arch/powerpc/boot/dts/p2041si.dtsi
index 5fdbb24c076..420cdb0f403 100644
--- a/arch/powerpc/boot/dts/p2040si.dtsi
+++ b/arch/powerpc/boot/dts/p2041si.dtsi
@@ -1,5 +1,5 @@
 /*
- * P2040 Silicon Device Tree Source
+ * P2041 Silicon Device Tree Source
  *
  * Copyright 2011 Freescale Semiconductor Inc.
  *
@@ -35,7 +35,7 @@
 /dts-v1/;
 
 / {
-	compatible = "fsl,P2040";
+	compatible = "fsl,P2041";
 	#address-cells = <2>;
 	#size-cells = <2>;
 	interrupt-parent = <&mpic>;
@@ -135,7 +135,7 @@
 		};
 
 		cpc: l3-cache-controller@10000 {
-			compatible = "fsl,p2040-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
+			compatible = "fsl,p2041-l3-cache-controller", "fsl,p4080-l3-cache-controller", "cache";
 			reg = <0x10000 0x1000>;
 			interrupts = <16 2 1 27>;
 		};
@@ -226,7 +226,7 @@
 		};
 
 		clockgen: global-utilities@e1000 {
-			compatible = "fsl,p2040-clockgen", "fsl,qoriq-clockgen-1.0";
+			compatible = "fsl,p2041-clockgen", "fsl,qoriq-clockgen-1.0";
 			reg = <0xe1000 0x1000>;
 			clock-frequency = <0>;
 		};
@@ -238,45 +238,45 @@
 		};
 
 		sfp: sfp@e8000 {
-			compatible = "fsl,p2040-sfp", "fsl,qoriq-sfp-1.0";
+			compatible = "fsl,p2041-sfp", "fsl,qoriq-sfp-1.0";
 			reg	   = <0xe8000 0x1000>;
 		};
 
 		serdes: serdes@ea000 {
-			compatible = "fsl,p2040-serdes";
+			compatible = "fsl,p2041-serdes";
 			reg	   = <0xea000 0x1000>;
 		};
 
 		dma0: dma@100300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x100300 0x4>;
 			ranges = <0x0 0x100100 0x200>;
 			cell-index = <0>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <28 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <29 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <30 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -287,33 +287,33 @@
 		dma1: dma@101300 {
 			#address-cells = <1>;
 			#size-cells = <1>;
-			compatible = "fsl,p2040-dma", "fsl,eloplus-dma";
+			compatible = "fsl,p2041-dma", "fsl,eloplus-dma";
 			reg = <0x101300 0x4>;
 			ranges = <0x0 0x101100 0x200>;
 			cell-index = <1>;
 			dma-channel@0 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x0 0x80>;
 				cell-index = <0>;
 				interrupts = <32 2 0 0>;
 			};
 			dma-channel@80 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x80 0x80>;
 				cell-index = <1>;
 				interrupts = <33 2 0 0>;
 			};
 			dma-channel@100 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x100 0x80>;
 				cell-index = <2>;
 				interrupts = <34 2 0 0>;
 			};
 			dma-channel@180 {
-				compatible = "fsl,p2040-dma-channel",
+				compatible = "fsl,p2041-dma-channel",
 						"fsl,eloplus-dma-channel";
 				reg = <0x180 0x80>;
 				cell-index = <3>;
@@ -324,22 +324,20 @@
 		spi@110000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "fsl,p2040-espi", "fsl,mpc8536-espi";
+			compatible = "fsl,p2041-espi", "fsl,mpc8536-espi";
 			reg = <0x110000 0x1000>;
 			interrupts = <53 0x2 0 0>;
 			fsl,espi-num-chipselects = <4>;
-
 		};
 
 		sdhc: sdhc@114000 {
-			compatible = "fsl,p2040-esdhc", "fsl,esdhc";
+			compatible = "fsl,p2041-esdhc", "fsl,esdhc";
 			reg = <0x114000 0x1000>;
 			interrupts = <48 2 0 0>;
 			sdhci,auto-cmd12;
 			clock-frequency = <0>;
 		};
 
-
 		i2c@118000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -417,7 +415,7 @@
 		};
 
 		gpio0: gpio@130000 {
-			compatible = "fsl,p2040-gpio", "fsl,qoriq-gpio";
+			compatible = "fsl,p2041-gpio", "fsl,qoriq-gpio";
 			reg = <0x130000 0x1000>;
 			interrupts = <55 2 0 0>;
 			#gpio-cells = <2>;
@@ -425,32 +423,34 @@
 		};
 
 		usb0: usb@210000 {
-			compatible = "fsl,p2040-usb2-mph",
+			compatible = "fsl,p2041-usb2-mph",
 					"fsl,mpc85xx-usb2-mph", "fsl-usb2-mph";
 			reg = <0x210000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <44 0x2 0 0>;
+			phy_type = "utmi";
 			port0;
 		};
 
 		usb1: usb@211000 {
-			compatible = "fsl,p2040-usb2-dr",
+			compatible = "fsl,p2041-usb2-dr",
 					"fsl,mpc85xx-usb2-dr", "fsl-usb2-dr";
 			reg = <0x211000 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			interrupts = <45 0x2 0 0>;
+			phy_type = "utmi";
 		};
 
 		sata@220000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x220000 0x1000>;
 			interrupts = <68 0x2 0 0>;
 		};
 
 		sata@221000 {
-			compatible = "fsl,p2040-sata", "fsl,pq-sata-v2";
+			compatible = "fsl,p2041-sata", "fsl,pq-sata-v2";
 			reg = <0x221000 0x1000>;
 			interrupts = <69 0x2 0 0>;
 		};
@@ -534,19 +534,19 @@
 	};
 
 	localbus@ffe124000 {
-		compatible = "fsl,p2040-elbc", "fsl,elbc", "simple-bus";
+		compatible = "fsl,p2041-elbc", "fsl,elbc", "simple-bus";
 		interrupts = <25 2 0 0>;
 		#address-cells = <2>;
 		#size-cells = <1>;
 	};
 
 	pci0: pcie@ffe200000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi0>;
 		interrupts = <16 2 1 15>;
 		pcie@0 {
@@ -568,12 +568,12 @@
 	};
 
 	pci1: pcie@ffe201000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi1>;
 		interrupts = <16 2 1 14>;
 		pcie@0 {
@@ -595,12 +595,12 @@
 	};
 
 	pci2: pcie@ffe202000 {
-		compatible = "fsl,p2040-pcie", "fsl,qoriq-pcie-v2.2";
+		compatible = "fsl,p2041-pcie", "fsl,qoriq-pcie-v2.2";
 		device_type = "pci";
 		#size-cells = <2>;
 		#address-cells = <3>;
 		bus-range = <0x0 0xff>;
-		clock-frequency = <0x1fca055>;
+		clock-frequency = <33333333>;
 		fsl,msi = <&msi2>;
 		interrupts = <16 2 1 13>;
 		pcie@0 {