aboutsummaryrefslogtreecommitdiff
path: root/drivers/media/video/saa7164/saa7164-cards.c
blob: a3c299405f46c28f9fffaeb5996b002f74440292 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
/*
 *  Driver for the NXP SAA7164 PCIe bridge
 *
 *  Copyright (c) 2009 Steven Toth <stoth@kernellabs.com>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/init.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/delay.h>

#include "saa7164.h"

/* The Bridge API needs to understand register widths (in bytes) for the
 * attached I2C devices, so we can simplify the virtual i2c mechansms
 * and keep the -i2c.c implementation clean.
 */
#define REGLEN_8bit	1
#define REGLEN_16bit	2

struct saa7164_board saa7164_boards[] = {
	[SAA7164_BOARD_UNKNOWN] = {
		/* Bridge will not load any firmware, without knowing
		 * the rev this would be fatal. */
		.name		= "Unknown",
	},
	[SAA7164_BOARD_UNKNOWN_REV2] = {
		/* Bridge will load the v2 f/w and dump descriptors */
		/* Required during new board bringup */
		.name		= "Generic Rev2",
		.chiprev	= SAA7164_CHIP_REV2,
	},
	[SAA7164_BOARD_UNKNOWN_REV3] = {
		/* Bridge will load the v2 f/w and dump descriptors */
		/* Required during new board bringup */
		.name		= "Generic Rev3",
		.chiprev	= SAA7164_CHIP_REV3,
	},
	[SAA7164_BOARD_HAUPPAUGE_HVR2200] = {
		.name		= "Hauppauge WinTV-HVR2200",
		.porta		= SAA7164_MPEG_DVB,
		.portb		= SAA7164_MPEG_DVB,
		.chiprev	= SAA7164_CHIP_REV3,
		.unit		= {{
			.id		= 0x1d,
			.type		= SAA7164_UNIT_EEPROM,
			.name		= "4K EEPROM",
			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
			.i2c_bus_addr	= 0xa0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x04,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1b,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1e,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "TDA10048-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x10 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1f,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "TDA10048-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x12 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		} },
	},
	[SAA7164_BOARD_HAUPPAUGE_HVR2200_2] = {
		.name		= "Hauppauge WinTV-HVR2200",
		.porta		= SAA7164_MPEG_DVB,
		.portb		= SAA7164_MPEG_DVB,
		.chiprev	= SAA7164_CHIP_REV2,
		.unit		= {{
			.id		= 0x06,
			.type		= SAA7164_UNIT_EEPROM,
			.name		= "4K EEPROM",
			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
			.i2c_bus_addr	= 0xa0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x04,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x05,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "TDA10048-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x10 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1e,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1f,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "TDA10048-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x12 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		} },
	},
	[SAA7164_BOARD_HAUPPAUGE_HVR2200_3] = {
		.name		= "Hauppauge WinTV-HVR2200",
		.porta		= SAA7164_MPEG_DVB,
		.portb		= SAA7164_MPEG_DVB,
		.chiprev	= SAA7164_CHIP_REV2,
		.unit		= {{
			.id		= 0x1d,
			.type		= SAA7164_UNIT_EEPROM,
			.name		= "4K EEPROM",
			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
			.i2c_bus_addr	= 0xa0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x04,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x05,
			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
			.name		= "TDA8290-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x84 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1b,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1c,
			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
			.name		= "TDA8290-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x84 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1e,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "TDA10048-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x10 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1f,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "TDA10048-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x12 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		} },
	},
	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
		.name		= "Hauppauge WinTV-HVR2250",
		.porta		= SAA7164_MPEG_DVB,
		.portb		= SAA7164_MPEG_DVB,
		.chiprev	= SAA7164_CHIP_REV3,
		.unit		= {{
			.id		= 0x22,
			.type		= SAA7164_UNIT_EEPROM,
			.name		= "4K EEPROM",
			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
			.i2c_bus_addr	= 0xa0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x04,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x07,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-1 (TOP)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x32 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x08,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-1 (QAM)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x34 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x1e,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x20,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-2 (TOP)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x32 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x23,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-2 (QAM)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x34 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		} },
	},
	[SAA7164_BOARD_HAUPPAUGE_HVR2250_2] = {
		.name		= "Hauppauge WinTV-HVR2250",
		.porta		= SAA7164_MPEG_DVB,
		.portb		= SAA7164_MPEG_DVB,
		.chiprev	= SAA7164_CHIP_REV3,
		.unit		= {{
			.id		= 0x28,
			.type		= SAA7164_UNIT_EEPROM,
			.name		= "4K EEPROM",
			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
			.i2c_bus_addr	= 0xa0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x04,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x07,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-1 (TOP)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x32 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x08,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-1 (QAM)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x34 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x24,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x26,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-2 (TOP)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x32 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x29,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-2 (QAM)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x34 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		} },
	},
	[SAA7164_BOARD_HAUPPAUGE_HVR2250_3] = {
		.name		= "Hauppauge WinTV-HVR2250",
		.porta		= SAA7164_MPEG_DVB,
		.portb		= SAA7164_MPEG_DVB,
		.chiprev	= SAA7164_CHIP_REV3,
		.unit		= {{
			.id		= 0x26,
			.type		= SAA7164_UNIT_EEPROM,
			.name		= "4K EEPROM",
			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
			.i2c_bus_addr	= 0xa0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x04,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-1",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x07,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-1 (TOP)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x32 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x08,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-1 (QAM)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
			.i2c_bus_addr	= 0x34 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x22,
			.type		= SAA7164_UNIT_TUNER,
			.name		= "TDA18271-2",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0xc0 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x24,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-2 (TOP)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x32 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		}, {
			.id		= 0x27,
			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
			.name		= "CX24228/S5H1411-2 (QAM)",
			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
			.i2c_bus_addr	= 0x34 >> 1,
			.i2c_reg_len	= REGLEN_8bit,
		} },
	},
};
const unsigned int saa7164_bcount = ARRAY_SIZE(saa7164_boards);

/* ------------------------------------------------------------------ */
/* PCI subsystem IDs                                                  */

struct saa7164_subid saa7164_subids[] = {
	{
		.subvendor = 0x0070,
		.subdevice = 0x8880,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8810,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8980,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8900,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_2,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8901,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_3,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x88A1,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_3,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8891,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
	}, {
		.subvendor = 0x0070,
		.subdevice = 0x8851,
		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
	},
};
const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);

void saa7164_card_list(struct saa7164_dev *dev)
{
	int i;

	if (0 == dev->pci->subsystem_vendor &&
	    0 == dev->pci->subsystem_device) {
		printk(KERN_ERR
			"%s: Board has no valid PCIe Subsystem ID and can't\n"
			"%s: be autodetected. Pass card=<n> insmod option to\n"
			"%s: workaround that. Send complaints to the vendor\n"
			"%s: of the TV card. Best regards,\n"
			"%s:         -- tux\n",
			dev->name, dev->name, dev->name, dev->name, dev->name);
	} else {
		printk(KERN_ERR
			"%s: Your board isn't known (yet) to the driver.\n"
			"%s: Try to pick one of the existing card configs via\n"
			"%s: card=<n> insmod option.  Updating to the latest\n"
			"%s: version might help as well.\n",
			dev->name, dev->name, dev->name, dev->name);
	}

	printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod "
		"option:\n", dev->name);

	for (i = 0; i < saa7164_bcount; i++)
		printk(KERN_ERR "%s:    card=%d -> %s\n",
		       dev->name, i, saa7164_boards[i].name);
}

/* TODO: clean this define up into the -cards.c structs */
#define PCIEBRIDGE_UNITID 2

void saa7164_gpio_setup(struct saa7164_dev *dev)
{


	switch (dev->board) {
	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
		/*
		GPIO 2: s5h1411 / tda10048-1 demod reset
		GPIO 3: s5h1411 / tda10048-2 demod reset
		GPIO 7: IRBlaster Zilog reset
		 */

		/* Reset parts by going in and out of reset */
		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
		saa7164_api_clear_gpiobit(dev, PCIEBRIDGE_UNITID, 3);

		msleep(10);

		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 2);
		saa7164_api_set_gpiobit(dev, PCIEBRIDGE_UNITID, 3);
		break;
	}

}

static void hauppauge_eeprom(struct saa7164_dev *dev, u8 *eeprom_data)
{
	struct tveeprom tv;

	/* TODO: Assumption: eeprom on bus 0 */
	tveeprom_hauppauge_analog(&dev->i2c_bus[0].i2c_client, &tv,
		eeprom_data);

	/* Make sure we support the board model */
	switch (tv.model) {
	case 88001:
		/* Development board - Limit circulation */
		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
	case 88021:
		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, MCE CIR, FM */
		break;
	case 88041:
		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, no IR, FM */
		break;
	case 88061:
		/* WinTV-HVR2250 (PCIe, Retail, full-height bracket)
		 * ATSC/QAM (TDA18271/S5H1411) and basic analog, FM */
		break;
	case 89519:
	case 89609:
		/* WinTV-HVR2200 (PCIe, Retail, full-height)
		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
		break;
	case 89619:
		/* WinTV-HVR2200 (PCIe, Retail, half-height)
		 * DVB-T (TDA18271/TDA10048) and basic analog, no IR */
		break;
	default:
		printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
			dev->name, tv.model);
		break;
	}

	printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
		tv.model);
}

void saa7164_card_setup(struct saa7164_dev *dev)
{
	static u8 eeprom[256];

	if (dev->i2c_bus[0].i2c_rc == 0) {
		if (saa7164_api_read_eeprom(dev, &eeprom[0],
			sizeof(eeprom)) < 0)
			return;
	}

	switch (dev->board) {
	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
		hauppauge_eeprom(dev, &eeprom[0]);
		break;
	}
}

/* With most other drivers, the kernel expects to communicate with subdrivers
 * through i2c. This bridge does not allow that, it does not expose any direct
 * access to I2C. Instead we have to communicate through the device f/w for
 * register access to 'processing units'. Each unit has a unique
 * id, regardless of how the physical implementation occurs across
 * the three physical i2c busses. The being said if we want leverge of
 * the existing kernel drivers for tuners and demods we have to 'speak i2c',
 * to this bridge implements 3 virtual i2c buses. This is a helper function
 * for those.
 *
 * Description: Translate the kernels notion of an i2c address and bus into
 * the appropriate unitid.
 */
int saa7164_i2caddr_to_unitid(struct saa7164_i2c *bus, int addr)
{
	/* For a given bus and i2c device address, return the saa7164 unique
	 * unitid. < 0 on error */

	struct saa7164_dev *dev = bus->dev;
	struct saa7164_unit *unit;
	int i;

	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
		unit = &saa7164_boards[dev->board].unit[i];

		if (unit->type == SAA7164_UNIT_UNDEFINED)
			continue;
		if ((bus->nr == unit->i2c_bus_nr) &&
			(addr == unit->i2c_bus_addr))
			return unit->id;
	}

	return -1;
}

/* The 7164 API needs to know the i2c register length in advance.
 * this is a helper function. Based on a specific chip addr and bus return the
 * reg length.
 */
int saa7164_i2caddr_to_reglen(struct saa7164_i2c *bus, int addr)
{
	/* For a given bus and i2c device address, return the
	 * saa7164 registry address width. < 0 on error
	 */

	struct saa7164_dev *dev = bus->dev;
	struct saa7164_unit *unit;
	int i;

	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
		unit = &saa7164_boards[dev->board].unit[i];

		if (unit->type == SAA7164_UNIT_UNDEFINED)
			continue;

		if ((bus->nr == unit->i2c_bus_nr) &&
			(addr == unit->i2c_bus_addr))
			return unit->i2c_reg_len;
	}

	return -1;
}
/* TODO: implement a 'findeeprom' functio like the above and fix any other
 * eeprom related todo's in -api.c.
 */

/* Translate a unitid into a x readable device name, for display purposes.  */
char *saa7164_unitid_name(struct saa7164_dev *dev, u8 unitid)
{
	char *undefed = "UNDEFINED";
	char *bridge = "BRIDGE";
	struct saa7164_unit *unit;
	int i;

	if (unitid == 0)
		return bridge;

	for (i = 0; i < SAA7164_MAX_UNITS; i++) {
		unit = &saa7164_boards[dev->board].unit[i];

		if (unit->type == SAA7164_UNIT_UNDEFINED)
			continue;

		if (unitid == unit->id)
				return unit->name;
	}

	return undefed;
}