if ARCH_PXA menu "Intel PXA2xx/PXA3xx Implementations" if PXA3xx menu "Supported PXA3xx Processor Variants" config CPU_PXA300 bool "PXA300 (codename Monahans-L)" config CPU_PXA310 bool "PXA310 (codename Monahans-LV)" select CPU_PXA300 config CPU_PXA320 bool "PXA320 (codename Monahans-P)" config CPU_PXA930 bool "PXA930 (codename Tavor-P)" config CPU_PXA935 bool "PXA935 (codename Tavor-P65)" endmenu endif config ARCH_GUMSTIX bool "Gumstix XScale 255 boards" select PXA25x help Say Y here if you intend to run this kernel on Basix, Connex, ws-200ax, ws-400ax systems choice prompt "Gumstix Carrier/Expansion Board" depends on ARCH_GUMSTIX config GUMSTIX_AM200EPD bool "Enable AM200EPD board support" endchoice config MACH_INTELMOTE2 bool "Intel Mote 2 Platform" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config ARCH_LUBBOCK bool "Intel DBPXA250 Development Platform" select PXA25x select SA1111 select PXA_HAVE_BOARD_IRQS config MACH_LOGICPD_PXA270 bool "LogicPD PXA270 Card Engine Development Platform" select PXA27x select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MAINSTONE bool "Intel HCDDBBVA0 Development Platform" select PXA27x select HAVE_PWM select PXA_HAVE_BOARD_IRQS config MACH_MP900C bool "Nec Mobilepro 900/c" select PXA25x config ARCH_PXA_IDP bool "Accelent Xscale IDP" select PXA25x config PXA_SHARPSL bool "SHARP Zaurus SL-5600, SL-C7xx and SL-Cxx00 Models" select SHARP_SCOOP select SHARP_PARAM help Say Y here if you intend to run this kernel on a Sharp Zaurus SL-5600 (Poodle), SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky), SL-C1000 (Akita), SL-C3000 (Spitz), SL-C3100 (Borzoi) or SL-C6000x (Tosa) handheld computer. config CORGI_SSP_DEPRECATED bool select PXA_SSP help This option will include corgi_ssp.c and corgi_lcd.c that corgi_ts.c and other legacy drivers (corgi_bl.c and sharpsl_pm.c) may depend on. config MACH_POODLE bool "Enable Sharp SL-5600 (Poodle) Support" depends on PXA_SHARPSL select PXA25x select SHARP_LOCOMO select PXA_SSP config MACH_CORGI bool "Enable Sharp SL-C700 (Corgi) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_SHEPHERD bool "Enable Sharp SL-C750 (Shepherd) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_HUSKY bool "Enable Sharp SL-C760 (Husky) Support" depends on PXA_SHARPSL select PXA25x select PXA_SHARP_C7xx config MACH_AKITA bool "Enable Sharp SL-1000 (Akita) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 select MACH_SPITZ select I2C select I2C_PXA config MACH_SPITZ bool "Enable Sharp Zaurus SL-3000 (Spitz) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_BORZOI bool "Enable Sharp Zaurus SL-3100 (Borzoi) Support" depends on PXA_SHARPSL select PXA27x select PXA_SHARP_Cxx00 config MACH_TOSA bool "Enable Sharp SL-6000x (Tosa) Support" depends on PXA_SHARPSL select PXA25x select PXA_HAVE_BOARD_IRQS config ARCH_VIPER bool "Arcom/Eurotech VIPER SBC" select PXA25x select ISA select I2C_GPIO select HAVE_PWM select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS config ARCH_PXA_ESERIES bool "PXA based Toshiba e-series PDAs" select PXA25x select PXA_HAVE_BOARD_IRQS config MACH_E330 bool "Toshiba e330" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e330 family PDA. config MACH_E350 bool "Toshiba e350" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e350 family PDA. config MACH_E740 bool "Toshiba e740" default y depends on ARCH_PXA_ESERIES select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e740 family PDA. config MACH_E750 bool "Toshiba e750" default y depends on ARCH_PXA_ESERIES select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e750 family PDA. config MACH_E400 bool "Toshiba e400" default y depends on ARCH_PXA_ESERIES help Say Y here if you intend to run this kernel on a Toshiba e400 family PDA. config MACH_E800 bool "Toshiba e800" default y depends on ARCH_PXA_ESERIES select FB_W100 help Say Y here if you intend to run this kernel on a Toshiba e800 family PDA. config TRIZEPS_PXA bool "PXA based Keith und Koep Trizeps DIMM-Modules" config MACH_H5000 bool "HP iPAQ h5000" select PXA25x config MACH_TRIZEPS4 bool "Keith und Koep Trizeps4 DIMM-Module" depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x config MACH_TRIZEPS4WL bool "Keith und Koep Trizeps4-WL DIMM-Module" depends on TRIZEPS_PXA select TRIZEPS_PCMCIA select PXA27x select PXA_SSP choice prompt "Select base board for Trizeps module" depends on TRIZEPS_PXA config MACH_TRIZEPS_CONXS bool "ConXS Eval Board" config MACH_TRIZEPS_UCONXS bool "uConXS Eval Board" config MACH_TRIZEPS_ANY bool "another Board" endchoice config TRIZEPS_PCMCIA bool help Enable PCMCIA support for Trizeps modules config MACH_EM_X270 bool "CompuLab EM-x270 platform" select PXA27x config MACH_COLIBRI bool "Toradex Colibri PX27x" select PXA27x config MACH_ZYLONITE bool "PXA3xx Development Platform (aka Zylonite)" select PXA3xx select PXA_SSP select HAVE_PWM config MACH_LITTLETON bool "PXA3xx Form Factor Platform (aka Littleton)" select PXA3xx select PXA_SSP config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx select PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx select PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select PXA27x select IWMMXT select PXA25x select PXA_SSP config MACH_CM_X300 bool "CompuLab CM-X300 modules" select PXA3xx select CPU_PXA300 config MACH_MAGICIAN bool "Enable HTC Magician Support" select PXA27x select IWMMXT select PXA_HAVE_BOARD_IRQS config MACH_MIOA701 bool "Mitac Mio A701 Support" select PXA27x select IWMMXT select HAVE_PWM select GPIO_SYSFS help Say Y here if you intend to run this kernel on a MIO A701. Currently there is only basic support for this PDA. config MACH_PCM027 bool "Phytec phyCORE-PXA270 CPU module (PCM-027)" select PXA27x select IWMMXT select PXA_SSP select PXA_HAVE_BOARD_IRQS config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM config MACH_PALMTX bool "Palm T|X" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on a Palm T|X handheld computer. config MACH_PALMZ72 bool "Palm Zire 72" default y depends on ARCH_PXA_PALM select PXA27x select IWMMXT help Say Y here if you intend to run this kernel on Palm Zire 72 handheld computer. config MACH_PCM990_BASEBOARD bool "PHYTEC PCM-990 development board" select HAVE_PWM depends on MACH_PCM027 choice prompt "display on pcm990" depends on MACH_PCM990_BASEBOARD config PCM990_DISPLAY_SHARP bool "sharp lq084v1dg21 stn display" config PCM990_DISPLAY_NEC bool "nec nl6448bc20_18d tft display" config PCM990_DISPLAY_NONE bool "no display" endchoice config PXA_EZX bool "Motorola EZX Platform" select PXA27x select IWMMXT select HAVE_PWM config MACH_EZX_A780 bool "Motorola EZX A780" default y depends on PXA_EZX config MACH_EZX_E680 bool "Motorola EZX E680" default y depends on PXA_EZX config MACH_EZX_A1200 bool "Motorola EZX A1200" default y depends on PXA_EZX config MACH_EZX_A910 bool "Motorola EZX A910" default y depends on PXA_EZX config MACH_EZX_E6 bool "Motorola EZX E6" default y depends on PXA_EZX config MACH_EZX_E2 bool "Motorola EZX E2" default y depends on PXA_EZX endmenu config PXA25x bool select CPU_XSCALE help Select code specific to PXA21x/25x/26x variants config PXA27x bool select CPU_XSCALE help Select code specific to PXA27x variants config CPU_PXA26x bool select PXA25x help Select code specific to PXA26x (codename Dalhart) config PXA3xx bool select CPU_XSC3 help Select code specific to PXA3xx variants config PXA_SHARP_C7xx bool select PXA_SSP select SHARPSL_PM help Enable support for all Sharp C7xx models config PXA_SHARP_Cxx00 bool select PXA_SSP select SHARPSL_PM help Enable common support for Sharp Cxx00 models config PXA_SSP tristate help Enable support for PXA2xx SSP ports config PXA_PWM tristate default BACKLIGHT_PWM help Enable support for PXA2xx/PXA3xx PWM controllers config TOSA_BT tristate "Control the state of built-in bluetooth chip on Sharp SL-6000" depends on MACH_TOSA select RFKILL help This is a simple driver that is able to control the state of built in bluetooth chip on tosa. config PXA_HAVE_BOARD_IRQS bool config PXA_HAVE_ISA_IRQS bool endif