aboutsummaryrefslogtreecommitdiff
path: root/include/linux/mfd/ab8500.h
AgeCommit message (Collapse)Author
2011-07-19USB:Enable GPIO configuration at connectlinaro-11.07-2.6.38Sakethram Bommisetti
GPIO alternate configuration is set when the USB is connected and reset at USB disconnect. Change-Id: I07d9c2ed5028879ecff309aa9e4ac25deac148f5 Signed-off-by: Sakethram Bommisetti <sakethram.bommisetti@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/27203 Reviewed-by: QATOOLS Reviewed-by: Praveena NADAHALLY <praveen.nadahally@stericsson.com> Reviewed-by: Philippe LANGLAIS <philippe.langlais@stericsson.com>
2011-06-29power: remove charger from ab8500 structMattias Wallin
The pointer to the charger from the ab8500 struct is no longer needed. ST-Ericsson ID: 256401 ST-Ericsson FOSS-OUT ID: Trivial ST-Ericsson Linux next: NA Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Change-Id: Iec4d4fb69c54366f96283ab1e676a874637550f0 Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/24710 Reviewed-by: Johan PALSSON <johan.palsson@stericsson.com> Reviewed-by: QATOOLS Reviewed-by: QATEST Reviewed-by: Jonas ABERG <jonas.aberg@stericsson.com>
2011-05-18Input: Add AB8500 AV Acc. Detection as platform drvPhilippe Langlais
Adds AV Accessory detection driver functionality as a platform driver. Driver allows detection of basic AV-Accessory connected to 3.5mm AV-Connector. Supported accessories include headphone, headset, video and carkit. Driver controls the audio-in/video-out switch based on the detected accessory type and notifies about button presses from basic headsets (No ECI Support). Accessory status and button presses are reported as standard input events, if AB8500 ASoC Machine driver is configured. For accessory properties reporting, ALSA JACK definitions (SND_JACK_*) are used to report the features supported by the attached accessory. Button presses are reported with KEY_MEDIA keycode. Depends on: http://gerrit.lud.stericsson.com/gerrit/16910 for GPIO framework update. ST-Ericsson ID: ER 275366 Signed-off-by: Rahul Venkatram <rahul.venkatram@stericsson.com> Change-Id: Ie1c68120fc718710ecac2d3dafe4f3e7b1a53ac1 Signed-off-by: Rahul Venkatram <rahul.venkatram@stericsson.com> Reviewed-on: http://gerrit.lud.stericsson.com/gerrit/16256 Reviewed-by: Mattias WALLIN <mattias.wallin@stericsson.com> Conflicts: arch/arm/mach-ux500/board-mop500-regulators.c arch/arm/mach-ux500/board-mop500.c sound/soc/ux500/ux500_ab8500.c
2011-05-04abx500: big merge from GLK 2.6.35Philippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@stericsson.com>
2011-05-04AB8500 GPIO : Fix & clean duplicate definePhilippe Langlais
Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org> (cherry picked from commit 0cb3fcd72cc3e6dd88f0e769746d294e5e6bafa9)
2011-03-28regulator: initialization for ab8500 regulatorsBengt Jonsson
The regulators on the AB8500 have a lot of custom hardware control settings pertaining to 8 external signals, settings which are board-specific and need be provided from the platform at startup. Initialization added for regulators Vana, VextSupply1, VextSupply2, VextSupply3, Vaux1, Vaux2, Vaux3, VTVout, Vintcore12, Vaudio, Vdmic, Vamic1, Vamic2, VrefDDR. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Reviewed-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> (cherry picked from commit 79568b941277b5986a8a7f0fb8578b2ccfc3e87e)
2011-03-25mfd: ab8500 chip revision 3.0 supportMattias Wallin
This patch adds support for ab8500 chip revision cut 3.0. Also rephrased from Changes to Author in the header. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> (cherry picked from commit adceed6263887e04721b477e6504aa24789f827d)
2011-01-14mfd: ab8500-core chip version cut 2.0 supportMattias Wallin
This patch adds support for chip version 2.0 or cut 2.0. One new interrupt latch register - latch 12 - is introduced. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: ab8500-core ioresources irq for subdrivers addedMattias Wallin
This patch adds the ioresources used by subdrivers to retrieve their interrupt. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-12regulators: Moved define for number of regulators in ab8500Bengt Jonsson
The define for number of regulators is moved from ab8500-core to ab8500-regulator so that the regulator driver can be updated independently of ab8500-core. This also changes the platform configuration structure of ab8500-core so that it contains a pointer to the regulator_init_data array plus number of regulators instead of an fixed size array of pointers to regulator_init_data. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-10-29mfd: Align ab8500 with the abx500 interfaceMattias Wallin
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-08-11ab8500-mfd: add regulator support to ab8500 mfd deviceSundar R Iyer
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-By: Mattias Wallin <mattias.wallin@stericsson.com> Acked-By: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-28mfd: New AB8500 driverRabin Vincent
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-04-26 04:00:13 +0000