aboutsummaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)Author
2011-05-21x86, mce, AMD: Fix leaving freed data in a listJulia Lawall
commit d9a5ac9ef306eb5cc874f285185a15c303c50009 upstream. b may be added to a list, but is not removed before being freed in the case of an error. This is done in the corresponding deallocation function, so the code here has been changed to follow that. The sematic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression E,E1,E2; identifier l; @@ *list_add(&E->l,E1); ... when != E1 when != list_del(&E->l) when != list_del_init(&E->l) when != E = E2 *kfree(E);// </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Link: http://lkml.kernel.org/r/1305294731-12127-1-git-send-email-julia@diku.dk Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-21x86: Fix UV BAU for non-consecutive nasidsCliff Wickman
commit 77ed23f8d995a01cd8101d84351b567bf5177a30 upstream. This is a fix for the SGI Altix-UV Broadcast Assist Unit code, which is used for TLB flushing. Certain hardware configurations (that customers are ordering) cause nasids (numa address space id's) to be non-consecutive. Specifically, once you have more than 4 blades in a IRU (Individual Rack Unit - or 1/2 rack) but less than the maximum of 16, the nasid numbering becomes non-consecutive. This currently results in a 'catastrophic error' (CATERR) detected by the firmware during OS boot. The BAU is generating an 'INTD' request that is targeting a non-existent nasid value. Such configurations may also occur when a blade is configured off because of hardware errors. (There is one UV hub per blade.) This patch is required to support such configurations. The problem with the tlb_uv.c code is that is using the consecutive hub numbers as indices to the BAU distribution bit map. These are simply the ordinal position of the hub or blade within its partition. It should be using physical node numbers (pnodes), which correspond to the physical nasid values. Use of the hub number only works as long as the nasids in the partition are consecutive and increase with a stride of 1. This patch changes the index to be the pnode number, thus allowing nasids to be non-consecutive. It also provides a table in local memory for each cpu to translate target cpu number to target pnode and nasid. And it improves naming to properly reflect 'node' and 'uvhub' versus 'nasid'. Signed-off-by: Cliff Wickman <cpw@sgi.com> Link: http://lkml.kernel.org/r/E1QJmxX-0002Mz-Fk@eag09.americas.sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-21x86, apic: Fix spurious error interrupts triggering on all non-boot APsYouquan Song
commit e503f9e4b092e2349a9477a333543de8f3c7f5d9 upstream. This patch fixes a bug reported by a customer, who found that many unreasonable error interrupts reported on all non-boot CPUs (APs) during the system boot stage. According to Chapter 10 of Intel Software Developer Manual Volume 3A, Local APIC may signal an illegal vector error when an LVT entry is set as an illegal vector value (0~15) under FIXED delivery mode (bits 8-11 is 0), regardless of whether the mask bit is set or an interrupt actually happen. These errors are seen as error interrupts. The initial value of thermal LVT entries on all APs always reads 0x10000 because APs are woken up by BSP issuing INIT-SIPI-SIPI sequence to them and LVT registers are reset to 0s except for the mask bits which are set to 1s when APs receive INIT IPI. When the BIOS takes over the thermal throttling interrupt, the LVT thermal deliver mode should be SMI and it is required from the kernel to keep AP's LVT thermal monitoring register programmed as such as well. This issue happens when BIOS does not take over thermal throttling interrupt, AP's LVT thermal monitor register will be restored to 0x10000 which means vector 0 and fixed deliver mode, so all APs will signal illegal vector error interrupts. This patch check if interrupt delivery mode is not fixed mode before restoring AP's LVT thermal monitor register. Signed-off-by: Youquan Song <youquan.song@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yong Wang <yong.y.wang@intel.com> Cc: hpa@linux.intel.com Cc: joe@perches.com Cc: jbaron@redhat.com Cc: trenn@suse.de Cc: kent.liu@intel.com Cc: chaohong.guo@intel.com Link: http://lkml.kernel.org/r/1303402963-17738-1-git-send-email-youquan.song@intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-21x86, AMD: Fix ARAT feature setting againBorislav Petkov
commit 14fb57dccb6e1defe9f89a66f548fcb24c374c1d upstream. Trying to enable the local APIC timer on early K8 revisions uncovers a number of other issues with it, in conjunction with the C1E enter path on AMD. Fixing those causes much more churn and troubles than the benefit of using that timer brings so don't enable it on K8 at all, falling back to the original functionality the kernel had wrt to that. Reported-and-bisected-by: Nick Bowler <nbowler@elliptictech.com> Cc: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Cc: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Nick Bowler <nbowler@elliptictech.com> Cc: Joerg-Volker-Peetz <jvpeetz@web.de> Signed-off-by: Borislav Petkov <borislav.petkov@amd.com> Link: http://lkml.kernel.org/r/1305636919-31165-3-git-send-email-bp@amd64.org Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-21Revert "x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processors"Borislav Petkov
commit 328935e6348c6a7cb34798a68c326f4b8372e68a upstream. This reverts commit e20a2d205c05cef6b5783df339a7d54adeb50962, as it crashes certain boxes with specific AMD CPU models. Moving the lower endpoint of the Erratum 400 check to accomodate earlier K8 revisions (A-E) opens a can of worms which is simply not worth to fix properly by tweaking the errata checking framework: * missing IntPenging MSR on revisions < CG cause #GP: http://marc.info/?l=linux-kernel&m=130541471818831 * makes earlier revisions use the LAPIC timer instead of the C1E idle routine which switches to HPET, thus not waking up in deeper C-states: http://lkml.org/lkml/2011/4/24/20 Therefore, leave the original boundary starting with K8-revF. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-21x86, hw_breakpoints: Fix racy access to ptrace breakpointsFrederic Weisbecker
commit 87dc669ba25777b67796d7262c569429e58b1ed4 upstream. While the tracer accesses ptrace breakpoints, the child task may concurrently exit due to a SIGKILL and thus release its breakpoints at the same time. We can then dereference some freed pointers. To fix this, hold a reference on the child breakpoints before manipulating them. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Will Deacon <will.deacon@arm.com> Cc: Prasad <prasad@linux.vnet.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Link: http://lkml.kernel.org/r/1302284067-7860-3-git-send-email-fweisbec@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-09KVM: SVM: check for progress after IRET interceptionAvi Kivity
commit bd3d1ec3d26b61120bb4f60b18ee99aa81839e6b upstream. When we enable an NMI window, we ask for an IRET intercept, since the IRET re-enables NMIs. However, the IRET intercept happens before the instruction executes, while the NMI window architecturally opens afterwards. To compensate for this mismatch, we only open the NMI window in the following exit, assuming that the IRET has by then executed; however, this assumption is not always correct; we may exit due to a host interrupt or page fault, without having executed the instruction. Fix by checking for forward progress by recording and comparing the IRET's rip. This is somewhat of a hack, since an unchaging rip does not mean that no forward progress has been made, but is the simplest fix for now. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-09x86, AMD: Fix APIC timer erratum 400 affecting K8 Rev.A-E processorsBoris Ostrovsky
commit e20a2d205c05cef6b5783df339a7d54adeb50962 upstream. Older AMD K8 processors (Revisions A-E) are affected by erratum 400 (APIC timer interrupts don't occur in C states greater than C1). This, for example, means that X86_FEATURE_ARAT flag should not be set for these parts. This addresses regression introduced by commit b87cf80af3ba4b4c008b4face3c68d604e1715c6 ("x86, AMD: Set ARAT feature on AMD processors") where the system may become unresponsive until external interrupt (such as keyboard input) occurs. This results, for example, in time not being reported correctly, lack of progress on the system and other lockups. Reported-by: Joerg-Volker Peetz <jvpeetz@web.de> Tested-by: Joerg-Volker Peetz <jvpeetz@web.de> Acked-by: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Boris Ostrovsky <Boris.Ostrovsky@amd.com> Link: http://lkml.kernel.org/r/1304113663-6586-1-git-send-email-ostr@amd64.org Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02x86, gart: Make sure GART does not map physmem above 1TBJoerg Roedel
commit 665d3e2af83c8fbd149534db8f57d82fa6fa6753 upstream. The GART can only map physical memory below 1TB. Make sure the gart driver in the kernel does not try to map memory above 1TB. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1303134346-5805-5-git-send-email-joerg.roedel@amd.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-05-02x86, gart: Set DISTLBWALKPRB bit alwaysJoerg Roedel
commit c34151a742d84ae65db2088ea30495063f697fbe upstream. The DISTLBWALKPRB bit must be set for the GART because the gatt table is mapped UC. But the current code does not set the bit at boot when the BIOS setup the aperture correctly. Fix that by setting this bit when enabling the GART instead of the other places. Cc: Borislav Petkov <borislav.petkov@amd.com> Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/1303134346-5805-4-git-send-email-joerg.roedel@amd.com Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-21x86, amd: Disable GartTlbWlkErr when BIOS forgets itJoerg Roedel
commit 5bbc097d890409d8eff4e3f1d26f11a9d6b7c07e upstream. This patch disables GartTlbWlk errors on AMD Fam10h CPUs if the BIOS forgets to do is (or is just too old). Letting these errors enabled can cause a sync-flood on the CPU causing a reboot. The AMD BKDG recommends disabling GART TLB Wlk Error completely. This patch is the fix for https://bugzilla.kernel.org/show_bug.cgi?id=33012 on my machine. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Link: http://lkml.kernel.org/r/20110415131152.GJ18463@8bytes.org Tested-by: Alexandre Demers <alexandre.f.demers@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-21x86, AMD: Set ARAT feature on AMD processorsBoris Ostrovsky
commit b87cf80af3ba4b4c008b4face3c68d604e1715c6 upstream. Support for Always Running APIC timer (ARAT) was introduced in commit db954b5898dd3ef3ef93f4144158ea8f97deb058. This feature allows us to avoid switching timers from LAPIC to something else (e.g. HPET) and go into timer broadcasts when entering deep C-states. AMD processors don't provide a CPUID bit for that feature but they also keep APIC timers running in deep C-states (except for cases when the processor is affected by erratum 400). Therefore we should set ARAT feature bit on AMD CPUs. Tested-by: Borislav Petkov <borislav.petkov@amd.com> Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com> Acked-by: Mark Langsdorf <mark.langsdorf@amd.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com> LKML-Reference: <1300205624-4813-1-git-send-email-ostr@amd64.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-21x86: Fix a bogus unwind annotation in lib/semaphore_32.SJan Beulich
commit e938c287ea8d977e079f07464ac69923412663ce upstream. 'simple' would have required specifying current frame address and return address location manually, but that's obviously not the case (and not necessary) here. Signed-off-by: Jan Beulich <jbeulich@novell.com> LKML-Reference: <4D6D1082020000780003454C@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14Revert "x86: Cleanup highmap after brk is concluded"Greg Kroah-Hartman
This reverts upstream commit e5f15b45ddf3afa2bbbb10c7ea34fb32b6de0a0e It caused problems in the stable tree and should not have been there. Cc: Yinghai Lu <yinghai@kernel.org> Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14x86, mtrr, pat: Fix one cpu getting out of sync during resumeSuresh Siddha
commit 84ac7cdbdd0f04df6b96153f7a79127fd6e45467 upstream. On laptops with core i5/i7, there were reports that after resume graphics workloads were performing poorly on a specific AP, while the other cpu's were ok. This was observed on a 32bit kernel specifically. Debug showed that the PAT init was not happening on that AP during resume and hence it contributing to the poor workload performance on that cpu. On this system, resume flow looked like this: 1. BP starts the resume sequence and we reinit BP's MTRR's/PAT early on using mtrr_bp_restore() 2. Resume sequence brings all AP's online 3. Resume sequence now kicks off the MTRR reinit on all the AP's. 4. For some reason, between point 2 and 3, we moved from BP to one of the AP's. My guess is that printk() during resume sequence is contributing to this. We don't see similar behavior with the 64bit kernel but there is no guarantee that at this point the remaining resume sequence (after AP's bringup) has to happen on BP. 5. set_mtrr() was assuming that we are still on BP and skipped the MTRR/PAT init on that cpu (because of 1 above) 6. But we were on an AP and this led to not reprogramming PAT on this cpu leading to bad performance. Fix this by doing unconditional mtrr_if->set_all() in set_mtrr() during MTRR/PAT init. This might be unnecessary if we are still running on BP. But it is of no harm and will guarantee that after resume, all the cpu's will be in sync with respect to the MTRR/PAT registers. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1301438292-28370-1-git-send-email-eric@anholt.net> Signed-off-by: Eric Anholt <eric@anholt.net> Tested-by: Keith Packard <keithp@keithp.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-04-14crypto: aesni-intel - fixed problem with packets that are not multiple of ↵Tadeusz Struk
64bytes commit 60af520cf264ea26b2af3a6871bbd71850522aea upstream. This patch fixes problem with packets that are not multiple of 64bytes. Signed-off-by: Adrian Hoban <adrian.hoban@intel.com> Signed-off-by: Aidan O'Mahony <aidan.o.mahony@intel.com> Signed-off-by: Gabriele Paoloni <gabriele.paoloni@intel.com> Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-27x86: Cleanup highmap after brk is concludedYinghai Lu
commit e5f15b45ddf3afa2bbbb10c7ea34fb32b6de0a0e upstream. Now cleanup_highmap actually is in two steps: one is early in head64.c and only clears above _end; a second one is in init_memory_mapping() and tries to clean from _brk_end to _end. It should check if those boundaries are PMD_SIZE aligned but currently does not. Also init_memory_mapping() is called several times for numa or memory hotplug, so we really should not handle initial kernel mappings there. This patch moves cleanup_highmap() down after _brk_end is settled so we can do everything in one step. Also we honor max_pfn_mapped in the implementation of cleanup_highmap. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-27x86: Fix binutils-2.21 symbol related build failuresSedat Dilek
commit 2ae9d293b14d17f35eff624272cfecac7979a2ee upstream. [only 1/2 of the upstream commit was needed for stable - gkh] New binutils version 2.21.0.20110302-1 started checking that the symbol parameter to the .size directive matches the entry name's symbol parameter, unearthing two mismatches: AS arch/x86/kernel/acpi/wakeup_rm.o arch/x86/kernel/acpi/wakeup_rm.S: Assembler messages: arch/x86/kernel/acpi/wakeup_rm.S:12: Error: .size expression with symbol `wakeup_code_start' does not evaluate to a constant arch/x86/kernel/entry_32.S: Assembler messages: arch/x86/kernel/entry_32.S:1421: Error: .size expression with symbol `apf_page_fault' does not evaluate to a constant The problem was discovered while using Debian's binutils (2.21.0.20110302-1) and experimenting with binutils from upstream. Thanks Alexander and H.J. for the vital help. Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com> Cc: Alexander van Heukelum <heukelum@fastmail.fm> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1299620364-21644-1-git-send-email-sedat.dilek@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-27xen: set max_pfn_mapped to the last pfn mappedStefano Stabellini
commit 14988a4d350ce3b41ecad4f63c4f44c56f5ae34d upstream. Do not set max_pfn_mapped to the end of the initial memory mappings, that also contain pages that don't belong in pfn space (like the mfn list). Set max_pfn_mapped to the last real pfn mapped in the initial memory mappings that is the pfn backing _end. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> LKML-Reference: <alpine.DEB.2.00.1103171739050.3382@kaball-desktop> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86, binutils, xen: Fix another wrong size directiveAlexander van Heukelum
commit 371c394af27ab7d1e58a66bc19d9f1f3ac1f67b4 upstream. The latest binutils (2.21.0.20110302/Ubuntu) breaks the build yet another time, under CONFIG_XEN=y due to a .size directive that refers to a slightly differently named (hence, to the now very strict and unforgiving assembler, non-existent) symbol. [ mingo: This unnecessary build breakage caused by new binutils version 2.21 gets escallated back several kernel releases spanning several years of Linux history, affecting over 130,000 upstream kernel commits (!), on CONFIG_XEN=y 64-bit kernels (i.e. essentially affecting all major Linux distro kernel configs). Git annotate tells us that this slight debug symbol code mismatch bug has been introduced in 2008 in commit 3d75e1b8: 3d75e1b8 (Jeremy Fitzhardinge 2008-07-08 15:06:49 -0700 1231) ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) The 'bug' is just a slight assymetry in ENTRY()/END() debug-symbols sequences, with lots of assembly code between the ENTRY() and the END(): ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) ... END(do_hypervisor_callback) Human reviewers almost never catch such small mismatches, and binutils never even warned about it either. This new binutils version thus breaks the Xen build on all upstream kernels since v2.6.27, out of the blue. This makes a straightforward Git bisection of all 64-bit Xen-enabled kernels impossible on such binutils, for a bisection window of over hundred thousand historic commits. (!) This is a major fail on the side of binutils and binutils needs to turn this show-stopper build failure into a warning ASAP. ] Signed-off-by: Alexander van Heukelum <heukelum@fastmail.fm> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Jan Beulich <jbeulich@novell.com> Cc: H.J. Lu <hjl.tools@gmail.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Kees Cook <kees.cook@canonical.com> LKML-Reference: <1299877178-26063-1-git-send-email-heukelum@fastmail.fm> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86: Flush TLB if PGD entry is changed in i386 PAE modeShaohua Li
commit 4981d01eada5354d81c8929d5b2836829ba3df7b upstream. According to intel CPU manual, every time PGD entry is changed in i386 PAE mode, we need do a full TLB flush. Current code follows this and there is comment for this too in the code. But current code misses the multi-threaded case. A changed page table might be used by several CPUs, every such CPU should flush TLB. Usually this isn't a problem, because we prepopulate all PGD entries at process fork. But when the process does munmap and follows new mmap, this issue will be triggered. When it happens, some CPUs keep doing page faults: http://marc.info/?l=linux-kernel&m=129915020508238&w=2 Reported-by: Yasunori Goto<y-goto@jp.fujitsu.com> Tested-by: Yasunori Goto<y-goto@jp.fujitsu.com> Reviewed-by: Rik van Riel <riel@redhat.com> Signed-off-by: Shaohua Li<shaohua.li@intel.com> Cc: Mallick Asit K <asit.k.mallick@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: linux-mm <linux-mm@kvack.org> LKML-Reference: <1300246649.2337.95.camel@sli10-conroe> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86: stop_machine_text_poke() should issue sync_core()Mathieu Desnoyers
commit 0e00f7aed6af21fc09b2a94d28bc34e449bd3a53 upstream. Intel Archiecture Software Developer's Manual section 7.1.3 specifies that a core serializing instruction such as "cpuid" should be executed on _each_ core before the new instruction is made visible. Failure to do so can lead to unspecified behavior (Intel XMC erratas include General Protection Fault in the list), so we should avoid this at all cost. This problem can affect modified code executed by interrupt handlers after interrupt are re-enabled at the end of stop_machine, because no core serializing instruction is executed between the code modification and the moment interrupts are reenabled. Because stop_machine_text_poke performs the text modification from the first CPU decrementing stop_machine_first, modified code executed in thread context is also affected by this problem. To explain why, we have to split the CPUs in two categories: the CPU that initiates the text modification (calls text_poke_smp) and all the others. The scheduler, executed on all other CPUs after stop_machine, issues an "iret" core serializing instruction, and therefore handles core serialization for all these CPUs. However, the text modification initiator can continue its execution on the same thread and access the modified text without any scheduler call. Given that the CPU that initiates the code modification is not guaranteed to be the one actually performing the code modification, it falls into the XMC errata. Q: Isn't this executed from an IPI handler, which will return with IRET (a serializing instruction) anyway? A: No, now stop_machine uses per-cpu workqueue, so that handler will be executed from worker threads. There is no iret anymore. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> LKML-Reference: <20110303160137.GB1590@Krystal> Reviewed-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Arjan van de Ven <arjan@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86, quirk: Fix SB600 revision checkAndreas Herrmann
commit 1d3e09a304e6c4e004ca06356578b171e8735d3c upstream. Commit 7f74f8f28a2bd9db9404f7d364e2097a0c42cc12 (x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems) introduced a regression. It removed some SB600 specific code to determine the revision ID without adapting a corresponding revision ID check for SB600. See this mail thread: http://marc.info/?l=linux-kernel&m=129980296006380&w=2 This patch adapts the corresponding check to cover all SB600 revisions. Tested-by: Wang Lei <f3d27b@gmail.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Andrew Morton <akpm@linux-foundation.org> LKML-Reference: <20110315143137.GD29499@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86: Emit "mem=nopentium ignored" warning when not supportedKamal Mostafa
commit 9a6d44b9adb777ca9549e88cd55bd8f2673c52a2 upstream. Emit warning when "mem=nopentium" is specified on any arch other than x86_32 (the only that arch supports it). Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1296783486-23033-2-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-23x86: Fix panic when handling "mem={invalid}" paramKamal Mostafa
commit 77eed821accf5dd962b1f13bed0680e217e49112 upstream. Avoid removing all of memory and panicing when "mem={invalid}" is specified, e.g. mem=blahblah, mem=0, or mem=nopentium (on platforms other than x86_32). Signed-off-by: Kamal Mostafa <kamal@canonical.com> BugLink: http://bugs.launchpad.net/bugs/553464 Cc: Yinghai Lu <yinghai@kernel.org> Cc: Len Brown <len.brown@intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> LKML-Reference: <1296783486-23033-1-git-send-email-kamal@canonical.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2011-03-14Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: ce4100: Set pci ops via callback instead of module init x86/mm: Fix pgd_lock deadlock x86/mm: Handle mm_fault_error() in kernel space x86: Don't check for BIOS corruption in first 64K when there's no need to
2011-03-14x86: ce4100: Set pci ops via callback instead of module initSebastian Andrzej Siewior
Setting the pci ops on subsys initcall unconditionally will break multi platform kernels on anything except ce4100. Use x86_init.pci.init ops to call this only on real ce4100 platforms. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: sodaville@linutronix.de LKML-Reference: <20110314093340.GA21026@www.tglx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-10Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, UV: Initialize the broadcast assist unit base destination node id properly x86, numa: Fix numa_emulation code with memory-less node0 x86, build: Make sure mkpiggy fails on read error
2011-03-10x86/mm: Fix pgd_lock deadlockAndrea Arcangeli
It's forbidden to take the page_table_lock with the irq disabled or if there's contention the IPIs (for tlb flushes) sent with the page_table_lock held will never run leading to a deadlock. Nobody takes the pgd_lock from irq context so the _irqsave can be removed. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> LKML-Reference: <201102162345.p1GNjMjm021738@imap1.linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-10x86/mm: Handle mm_fault_error() in kernel spaceAndrey Vagin
mm_fault_error() should not execute oom-killer, if page fault occurs in kernel space. E.g. in copy_from_user()/copy_to_user(). This would happen if we find ourselves in OOM on a copy_to_user(), or a copy_from_user() which faults. Without this patch, the kernels hangs up in copy_from_user(), because OOM killer sends SIG_KILL to current process, but it can't handle a signal while in syscall, then the kernel returns to copy_from_user(), reexcute current command and provokes page_fault again. With this patch the kernel return -EFAULT from copy_from_user(). The code, which checks that page fault occurred in kernel space, has been copied from do_sigbus(). This situation is handled by the same way on powerpc, xtensa, tile, ... Signed-off-by: Andrey Vagin <avagin@openvz.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@kernel.org> LKML-Reference: <201103092322.p29NMNPH001682@imap1.linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-09[CPUFREQ] pcc-cpufreq: don't load driver if get_freq fails during init.Naga Chumbalkar
Return 0 on failure. This will cause the initialization of the driver to fail and prevent the driver from loading if the BIOS cannot handle the PCC interface command to "get frequency". Otherwise, the driver will load and display a very high value like "4294967274" (which is actually -EINVAL) for frequency: # cat /sys/devices/system/cpu/cpu0/cpufreq/cpuinfo_cur_freq 4294967274 Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> CC: stable@kernel.org Signed-off-by: Dave Jones <davej@redhat.com>
2011-03-09x86: Don't check for BIOS corruption in first 64K when there's no need toNaga Chumbalkar
Due to commit 781c5a67f152c17c3e4a9ed9647f8c0be6ea5ae9 it is likely that the number of areas to scan for BIOS corruption is 0 -- especially when the first 64K is already reserved (X86_RESERVE_LOW is 64K by default). If that's the case then don't set up the scan. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: <stable@kernel.org> LKML-Reference: <20110225202838.2229.71011.sendpatchset@nchumbalkar.americas.hpqcorp.net> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-09x86, UV: Initialize the broadcast assist unit base destination node id properlyCliff Wickman
The BAU's initialization of the broadcast description header is lacking the coherence domain (high bits) in the nasid. This causes a catastrophic system failure when running on a system with multiple coherence domains. Signed-off-by: Cliff Wickman <cpw@sgi.com> LKML-Reference: <E1PxKBB-0005F0-3U@eag09.americas.sgi.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-04x86, numa: Fix numa_emulation code with memory-less node0Yinghai Lu
This crash happens on a system that does not have RAM on node0. When numa_emulation is compiled in, and: 1. we boot the system without numa=fake... 2. or we boot the system with numa=fake=128 to make emulation fail we will get: [ 0.076025] ------------[ cut here ]------------ [ 0.080004] kernel BUG at arch/x86/mm/numa_64.c:788! [ 0.080004] invalid opcode: 0000 [#1] SMP [...] need to use early_cpu_to_node() directly, because cpu_to_apicid and apicid_to_node will return node0 that is not onlined. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> LKML-Reference: <4D6ECF72.5010308@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-03-02Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: of/promtree: allow DT device matching by fixing 'name' brokenness (v5) x86: OLPC: have prom_early_alloc BUG rather than return NULL of/flattree: Drop an uninteresting message to pr_debug level of: Add missing of_address.h to xilinx ehci driver
2011-03-02Merge branch 'fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] p4-clockmod: print EST-capable warning message only once [CPUFREQ] fix BUG on cpufreq policy init failure [CPUFREQ] Fix another notifier leak in powernow-k8. [CPUFREQ] Missing "unregister_cpu_notifier" in powernow-k8.c
2011-03-02Merge branch 'idle-release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: intel_idle: disable Atom/Lincroft HW C-state auto-demotion intel_idle: disable NHM/WSM HW C-state auto-demotion
2011-03-02x86: OLPC: have prom_early_alloc BUG rather than return NULLAndres Salomon
..similar to what sparc's prom_early_alloc does. Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-03-01x86, build: Make sure mkpiggy fails on read errorDaniel J Blueman
Ensure build doesn't silently continue despite read failure, addressing a warning due to the unchecked call. Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> LKML-Reference: <AANLkTimxxTMU3=4ry-_zbY6v1xiDi+hW9y1RegTr8vLK@mail.gmail.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-03-01[CPUFREQ] p4-clockmod: print EST-capable warning message only onceNaga Chumbalkar
Print the message only once. I see it 16 times on a 2P box with 16 logical CPUs. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
2011-03-01[CPUFREQ] Fix another notifier leak in powernow-k8.Dave Jones
Do the notifier registration later, so we don't have to worry about freeing it if we fail the msr allocation. Signed-off-by: Dave Jones <davej@redhat.com>
2011-03-01[CPUFREQ] Missing "unregister_cpu_notifier" in powernow-k8.cNeil Brown
It appears that when powernow-k8 finds that No compatible ACPI _PSS objects found. and suggests Try again with latest BIOS. it fails the module load, but does not unregister the cpu_notifier that was registered in powernowk8_init This ends up leaving freed memory on the cpu notifier list for some other poor module (e.g. md/raid5) to come along and trip over. The following might be a partial fix, but I suspect there is probably other clean-up that is needed. ( https://bugzilla.novell.com/show_bug.cgi?id=655215 has full dmesg traces). Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Neil Brown <neilb@suse.de>
2011-02-28x86: Use u32 instead of long to set reset vector back to 0Don Zickus
A customer of ours, complained that when setting the reset vector back to 0, it trashed other data and hung their box. They noticed when only 4 bytes were set to 0 instead of 8, everything worked correctly. Mathew pointed out: | | We're supposed to be resetting trampoline_phys_low and | trampoline_phys_high here, which are two 16-bit values. | Writing 64 bits is definitely going to overwrite space | that we're not supposed to be touching. | So limit the area modified to u32. Signed-off-by: Don Zickus <dzickus@redhat.com> Acked-by: Matthew Garrett <mjg@redhat.com> Cc: <stable@kernel.org> LKML-Reference: <1297139100-424-1-git-send-email-dzickus@redhat.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-25Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systems x86/mrst: Fix apb timer rating when lapic timer is used x86: Fix reboot problem on VersaLogic Menlow boards
2011-02-24Merge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds
* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: SVM: Advance instruction pointer in dr_intercept
2011-02-24x86 quirk: Fix polarity for IRQ0 pin2 override on SB800 systemsAndreas Herrmann
On some SB800 systems polarity for IOAPIC pin2 is wrongly specified as low active by BIOS. This caused system hangs after resume from S3 when HPET was used in one-shot mode on such systems because a timer interrupt was missed (HPET signal is high active). For more details see: http://marc.info/?l=linux-kernel&m=129623757413868 Tested-by: Manoj Iyer <manoj.iyer@canonical.com> Tested-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com> Cc: Borislav Petkov <borislav.petkov@amd.com> Cc: stable@kernel.org # 37.x, 32.x LKML-Reference: <20110224145346.GD3658@alberich.amd.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-24x86/mrst: Fix apb timer rating when lapic timer is usedJacob Pan
Need to adjust the clockevent device rating for the structure that will be registered with clockevent system instead of the temporary structure. Without this fix, APB timer rating will be higher than LAPIC timer such that it can not be released later to be used as the broadcast timer. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> LKML-Reference: <1298506046-439-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-22KVM: SVM: Advance instruction pointer in dr_interceptJoerg Roedel
In the dr_intercept function a new cpu-feature called decode-assists is implemented and used when available. This code-path does not advance the guest-rip causing the guest to dead-loop over mov-dr instructions. This is fixed by this patch. Signed-off-by: Joerg Roedel <joerg.roedel@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2011-02-21x86: Fix reboot problem on VersaLogic Menlow boardsKushal Koolwal
VersaLogic Menlow based boards hang on reboot unless reboot=bios is used. Add quirk to reboot through the BIOS. Tested on at least four boards. Signed-off-by: Kushal Koolwal <kushalkoolwal@gmail.com> LKML-Reference: <1298152563-21594-1-git-send-email-kushalkoolwal@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-17intel_idle: disable Atom/Lincroft HW C-state auto-demotionLen Brown
Just as we had to disable auto-demotion for NHM/WSM, we need to do the same for Atom (Lincroft version). In particular, auto-demotion will prevent Lincroft from entering the S0i3 idle power saving state. https://bugzilla.kernel.org/show_bug.cgi?id=25252 Signed-off-by: Len Brown <len.brown@intel.com>