aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/pci
AgeCommit message (Collapse)Author
2011-03-14x86: ce4100: Set pci ops via callback instead of module initSebastian Andrzej Siewior
Setting the pci ops on subsys initcall unconditionally will break multi platform kernels on anything except ce4100. Use x86_init.pci.init ops to call this only on real ce4100 platforms. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: sodaville@linutronix.de LKML-Reference: <20110314093340.GA21026@www.tglx.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-14Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI/PM: Report wakeup events before resuming devices PCI/PM: Use pm_wakeup_event() directly for reporting wakeup events PCI: sysfs: Update ROM to include default owner write access x86/PCI: make Broadcom CNB20LE driver EMBEDDED and EXPERIMENTAL x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is available PCI/ACPI: Request _OSC control once for each root bridge (v3) PCI: enable pci=bfsort by default on future Dell systems PCI/PCIe: Clear Root PME Status bits early during system resume PCI: pci-stub: ignore zero-length id parameters x86/PCI: irq and pci_ids patch for Intel Patsburg PCI: Skip id checking if no id is passed PCI: fix __pci_device_probe kernel-doc warning PCI: make pci_restore_state return void PCI: Disable ASPM if BIOS asks us to PCI: Add mask bit definition for MSI-X table PCI: MSI: Move MSI-X entry definition to pci_regs.h Fix up trivial conflicts in drivers/net/{skge.c,sky2.c} that had in the meantime been converted to not use legacy PCI power management, and thus no longer use pci_restore_state() at all (and that caused trivial conflicts with the "make pci_restore_state return void" patch)
2011-01-14x86/PCI: don't use native Broadcom CNB20LE driver when ACPI is availableBjorn Helgaas
The broadcom_bus.c quirk was written (without benefit of documentation) to support PCI hotplug on an old system that doesn't have ACPI. As such, we should only use it when the system doesn't have ACPI. If the system does have ACPI and we need the host bridge description, we should get it from the ACPI _CRS method. On machines older than 2008, we currently ignore _CRS, but that doesn't mean we should use broadcom_bus.c. It means we should either (a) do what we've done in the past and assume everything in the PCI gap is routed to bus 0 (so hotplug may not work), or (b) arrange to use _CRS. This patch does (a). Reference: https://bugzilla.redhat.com/show_bug.cgi?id=665109 Acked-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-14PCI: enable pci=bfsort by default on future Dell systemsNarendra_K@Dell.com
This patch enables pci=bfsort by default on future Dell systems. It reads SMBIOS type 0xB1 vendor specific record and sets pci=bfsort accordingly. Offset Name Length Value Description 04 Flags0 Word Varies Bits 9-10 - 10:9 = 00 Unknown - 10:9 = 01 Breadth First - 10:9 = 10 Depth First - 10:9 = 11 Reserved 1. Any time pci=bfsort has to be enabled on a system, we need to add the model number of the system to the white list. With this patch, that is not required. 2. Typically, model number has to be added to the white list when the system is under development. With this change, that is not required. Signed-off-by: Jordan Hargrave <jordan_hargrave@dell.com> Signed-off-by: Narendra K <narendra_k@dell.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2011-01-11x86: Use PCI method for enabling AMD extended config space before MSR methodJan Beulich
While both methods should work equivalently well for the native case, the Xen Dom0 case can't reliably work with the MSR one, since there's no guarantee that the virtual CPUs it has available fully cover all necessary physical ones. As per the suggestion of Robert Richter the patch only adds the PCI method, but leaves the MSR one as a fallback to cover new systems the PCI IDs of which may not have got added to the code base yet. The only change in v2 is the breaking out of the new CPI initialization method into a separate function, as requested by Ingo. Signed-off-by: Jan Beulich <jbeulich@novell.com> Acked-by: Robert Richter <robert.richter@amd.com> Cc: Andreas Herrmann3 <Andreas.Herrmann3@amd.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> LKML-Reference: <4D2B3FD7020000780002B67D@vpn.id2.novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-06Merge branch 'x86-security-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-security-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: module: Move RO/NX module protection to after ftrace module update x86: Resume trampoline must be executable x86: Add RO/NX protection for loadable kernel modules x86: Add NX protection for kernel data x86: Fix improper large page preservation
2011-01-06Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, earlyprintk: Move mrst early console to platform/ and fix a typo x86, apbt: Setup affinity for apb timers acting as per-cpu timer ce4100: Add errata fixes for UART on CE4100 x86: platform: Move iris to x86/platform where it belongs x86, mrst: Check platform_device_register() return code x86/platform: Add Eurobraille/Iris power off support x86, mrst: Add explanation for using 1960 as the year offset for vrtc x86, mrst: Fix dependencies of "select INTEL_SCU_IPC" x86, mrst: The shutdown for MRST requires the SCU IPC mechanism x86: Ce4100: Add reboot_fixup() for CE4100 ce4100: Add PCI register emulation for CE4100 x86: Add CE4100 platform support x86: mrst: Set vRTC's IRQ to level trigger type x86: mrst: Add audio driver bindings rtc: Add drivers/rtc/rtc-mrst.c x86: mrst: Add vrtc driver which serves as a wall clock device x86: mrst: Add Moorestown specific reboot/shutdown support x86: mrst: Parse SFI timer table for all timer configs x86/mrst: Add SFI platform device parsing code
2010-12-23x86/PCI: irq and pci_ids patch for Intel PatsburgSeth Heasley
This patch adds an additional LPC Controller DeviceID for the Intel Patsburg PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-23Merge commit 'v2.6.37-rc7' into x86/securityIngo Molnar
2010-12-17x86: avoid low BIOS area when allocating address spaceBjorn Helgaas
This implements arch_remove_reservations() so allocate_resource() can avoid any arch-specific reserved areas. This currently just avoids the BIOS area (the first 1MB), but could be used for E820 reserved areas if that turns out to be necessary. We previously avoided this area in pcibios_align_resource(). This patch moves the test from that PCI-specific path to a generic path, so *all* resource allocations will avoid this area. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-17Revert "x86/PCI: allocate space from the end of a region, not the beginning"Bjorn Helgaas
This reverts commit dc9887dc02e37bcf83f4e792aa14b07782ef54cf. Acked-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-12-02xen: fix MSI setup and teardown for PV on HVM guestsStefano Stabellini
When remapping MSIs into pirqs for PV on HVM guests, qemu is responsible for doing the actual mapping and unmapping. We only give qemu the desired pirq number when we ask to do the mapping the first time, after that we should be reading back the pirq number from qemu every time we want to re-enable the MSI. This fixes a bug in xen_hvm_setup_msi_irqs that manifests itself when trying to enable the same MSI for the second time: the old MSI to pirq mapping is still valid at this point but xen_hvm_setup_msi_irqs would try to assign a new pirq anyway. A simple way to reproduce this bug is to assign an MSI capable network card to a PV on HVM guest, if the user brings down the corresponding ethernet interface and up again, Linux would fail to enable MSIs on the device. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-11-18x86: Add NX protection for kernel dataMatthieu Castet
This patch expands functionality of CONFIG_DEBUG_RODATA to set main (static) kernel data area as NX. The following steps are taken to achieve this: 1. Linker script is adjusted so .text always starts and ends on a page bound 2. Linker script is adjusted so .rodata always start and end on a page boundary 3. NX is set for all pages from _etext through _end in mark_rodata_ro. 4. free_init_pages() sets released memory NX in arch/x86/mm/init.c 5. bios rom is set to x when pcibios is used. The results of patch application may be observed in the diff of kernel page table dumps: pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc00a0000 640K RW GLB NX pte +0xc00a0000-0xc0100000 384K RW GLB x pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte No pcibios: -- data_nx_pt_before.txt 2009-10-13 07:48:59.000000000 -0400 ++ data_nx_pt_after.txt 2009-10-13 07:26:46.000000000 -0400 0x00000000-0xc0000000 3G pmd ---[ Kernel Mapping ]--- -0xc0000000-0xc0100000 1M RW GLB x pte +0xc0000000-0xc0100000 1M RW GLB NX pte -0xc0100000-0xc03d7000 2908K ro GLB x pte +0xc0100000-0xc0318000 2144K ro GLB x pte +0xc0318000-0xc03d7000 764K ro GLB NX pte -0xc03d7000-0xc0600000 2212K RW GLB x pte +0xc03d7000-0xc0600000 2212K RW GLB NX pte 0xc0600000-0xf7a00000 884M RW PSE GLB NX pmd 0xf7a00000-0xf7bfe000 2040K RW GLB NX pte 0xf7bfe000-0xf7c00000 8K pte The patch has been originally developed for Linux 2.6.34-rc2 x86 by Siarhei Liakh <sliakh.lkml@gmail.com> and Xuxian Jiang <jiang@cs.ncsu.edu>. -v1: initial patch for 2.6.30 -v2: patch for 2.6.31-rc7 -v3: moved all code into arch/x86, adjusted credits -v4: fixed ifdef, removed credits from CREDITS -v5: fixed an address calculation bug in mark_nxdata_nx() -v6: added acked-by and PT dump diff to commit log -v7: minor adjustments for -tip -v8: rework with the merge of "Set first MB as RW+NX" Signed-off-by: Siarhei Liakh <sliakh.lkml@gmail.com> Signed-off-by: Xuxian Jiang <jiang@cs.ncsu.edu> Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Morris <jmorris@namei.org> Cc: Andi Kleen <ak@muc.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dave Jones <davej@redhat.com> Cc: Kees Cook <kees.cook@canonical.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> LKML-Reference: <4CE2F82E.60601@free.fr> [ minor cleanliness edits ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: sysfs: fix printk warnings PCI: fix pci_bus_alloc_resource() hang, prefer positive decode PCI: read current power state at enable time PCI: fix size checks for mmap() on /proc/bus/pci files x86/PCI: coalesce overlapping host bridge windows PCI hotplug: ibmphp: Add check to prevent reading beyond mapped area
2010-11-12ce4100: Add PCI register emulation for CE4100Dirk Brandewie
This patch provides access methods for PCI registers that mis-behave on the CE4100. Each register can be assigned a private init, read and write routine. The exception to this is the bridge device. The bridge device is the only device on bus zero (0) that requires any fixup so it is a special case. [ tglx: minor coding style cleanups, __init annotation and simplification of ce4100_conf_read/write ] Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> LKML-Reference: <40b6751381c2275dc359db5a17989cce22ad8db7.1289331834.git.dirk.brandewie@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-11-11x86/PCI: coalesce overlapping host bridge windowsBjorn Helgaas
Some BIOSes provide PCI host bridge windows that overlap, e.g., pci_root PNP0A03:00: host bridge window [mem 0xb0000000-0xffffffff] pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xdfffffff] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xffffffff] If we simply insert these as children of iomem_resource, the second window fails because it conflicts with the first, and the third is inserted as a child of the first, i.e., b0000000-ffffffff PCI Bus 0000:00 f0000000-ffffffff PCI Bus 0000:00 When we claim PCI device resources, this can cause collisions like this if we put them in the first window: pci 0000:00:01.0: address space collision: [mem 0xff300000-0xff4fffff] conflicts with PCI Bus 0000:00 [mem 0xf0000000-0xffffffff] Host bridge windows are top-level resources by definition, so it doesn't make sense to make the third window a child of the first. This patch coalesces any host bridge windows that overlap. For the example above, the result is this single window: pci_root PNP0A03:00: host bridge window [mem 0xafffffff-0xffffffff] This fixes a 2.6.34 regression. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=17011 Reported-and-tested-by: Anisse Astier <anisse@astier.eu> Reported-and-tested-by: Pramod Dematagoda <pmd.lotr.gandalf@gmail.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-11-08xen: fix memory leak in Xen PCI MSI/MSI-X allocator.Jiri Slaby
Stanse found that xen_setup_msi_irqs leaks memory when xen_allocate_pirq fails. Free the memory in that fail path. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: xen-devel@lists.xensource.com Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org
2010-10-28Merge branch 'stable/xen-pcifront-0.8.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm * 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm: xen: register xen pci notifier xen: initialize cpu masks for pv guests in xen_smp_init xen: add a missing #include to arch/x86/pci/xen.c xen: mask the MTRR feature from the cpuid xen: make hvc_xen console work for dom0. xen: add the direct mapping area for ISA bus access xen: Initialize xenbus for dom0. xen: use vcpu_ops to setup cpu masks xen: map a dummy page for local apic and ioapic in xen_set_fixmap xen: remap MSIs into pirqs when running as initial domain xen: remap GSIs as pirqs when running as initial domain xen: introduce XEN_DOM0 as a silent option xen: map MSIs into pirqs xen: support GSI -> pirq remapping in PV on HVM guests xen: add xen hvm acpi_register_gsi variant acpi: use indirect call to register gsi in different modes xen: implement xen_hvm_register_pirq xen: get the maximum number of pirqs from xen xen: support pirq != irq * 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits) X86/PCI: Remove the dependency on isapnp_disable. xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright. x86: xen: Sanitse irq handling (part two) swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it. MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer. xen/pci: Request ACS when Xen-SWIOTLB is activated. xen-pcifront: Xen PCI frontend driver. xenbus: prevent warnings on unhandled enumeration values xenbus: Xen paravirtualised PCI hotplug support. xen/x86/PCI: Add support for the Xen PCI subsystem x86: Introduce x86_msi_ops msi: Introduce default_[teardown|setup]_msi_irqs with fallback. x86/PCI: Export pci_walk_bus function. x86/PCI: make sure _PAGE_IOMAP it set on pci mappings x86/PCI: Clean up pci_cache_line_size xen: fix shared irq device passthrough xen: Provide a variant of xen_poll_irq with timeout. xen: Find an unbound irq number in reverse order (high to low). xen: statically initialize cpu_evtchn_mask_p ... Fix up trivial conflicts in drivers/pci/Makefile
2010-10-26x86/PCI: allocate space from the end of a region, not the beginningBjorn Helgaas
Allocate from the end of a region, not the beginning. For example, if we need to allocate 0x800 bytes for a device on bus 0000:00 given these resources: [mem 0xbff00000-0xdfffffff] PCI Bus 0000:00 [mem 0xc0000000-0xdfffffff] PCI Bus 0000:02 the available space at [mem 0xbff00000-0xbfffffff] is passed to the alignment callback (pcibios_align_resource()). Prior to this patch, we would put the new 0x800 byte resource at the beginning of that available space, i.e., at [mem 0xbff00000-0xbff007ff]. With this patch, we put it at the end, at [mem 0xbffff800-0xbfffffff]. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=16228#c41 Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-22xen: add a missing #include to arch/x86/pci/xen.cStefano Stabellini
Add missing #include <asm/io_apic.h> to arch/x86/pci/xen.c. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2010-10-22xen: remap MSIs into pirqs when running as initial domainQing He
Implement xen_create_msi_irq to create an msi and remap it as pirq. Use xen_create_msi_irq to implement an initial domain specific version of setup_msi_irqs. Signed-off-by: Qing He <qing.he@intel.com> Signed-off-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: remap GSIs as pirqs when running as initial domainJeremy Fitzhardinge
Implement xen_register_gsi to setup the correct triggering and polarity properties of a gsi. Implement xen_register_pirq to register a particular gsi as pirq and receive interrupts as events. Call xen_setup_pirqs to register all the legacy ISA irqs as pirqs. Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: map MSIs into pirqsStefano Stabellini
Map MSIs into pirqs, writing 0 in the MSI vector data field and the pirq number in the MSI destination id field. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: support GSI -> pirq remapping in PV on HVM guestsStefano Stabellini
Disable pcifront when running on HVM: it is meant to be used with pv guests that don't have PCI bus. Use acpi_register_gsi_xen_hvm to remap GSIs into pirqs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-22xen: add xen hvm acpi_register_gsi variantJeremy Fitzhardinge
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
2010-10-22xen: implement xen_hvm_register_pirqStefano Stabellini
xen_hvm_register_pirq allows the kernel to map a GSI into a Xen pirq and receive the interrupt as an event channel from that point on. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-21X86/PCI: Remove the dependency on isapnp_disable.Konrad Rzeszutek Wilk
This looks to be vestigial dependency that had never been used even in the original code base (2.6.18) from which this driver was up-ported. Without this fix, with the CONFIG_ISAPNP, we get this compile failure: arch/x86/pci/xen.c: In function 'pci_xen_init': arch/x86/pci/xen.c:138: error: 'isapnp_disable' undeclared (first use in this function) arch/x86/pci/xen.c:138: error: (Each undeclared identifier is reported only once arch/x86/pci/xen.c:138: error: for each function it appears in.) Reported-by: Li Zefan <lizf@cn.fujitsu.com> Tested-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2010-10-18xen/x86/PCI: Add support for the Xen PCI subsystemAlex Nixon
The frontend stub lives in arch/x86/pci/xen.c, alongside other sub-arch PCI init code (e.g. olpc.c). It provides a mechanism for Xen PCI frontend to setup/destroy legacy interrupts, MSI/MSI-X, and PCI configuration operations. [ Impact: add core of Xen PCI support ] [ v2: Removed the IOMMU code and only focusing on PCI.] [ v3: removed usage of pci_scan_all_fns as that does not exist] [ v4: introduced pci_xen value to fix compile warnings] [ v5: squished fixes+features in one patch, changed Reviewed-by to Ccs] [ v7: added Acked-by] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Qing He <qing.he@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: x86@kernel.org
2010-10-18x86/PCI: make sure _PAGE_IOMAP it set on pci mappingsJeremy Fitzhardinge
When mapping pci space via /sys or /proc, make sure we're really doing a hardware mapping by setting _PAGE_IOMAP. [ Impact: bugfix; make PCI mappings map the right pages ] Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: x86@kernel.org
2010-10-18x86/PCI: Clean up pci_cache_line_sizeAlex Nixon
Separate out x86 cache_line_size initialisation code into its own function (so it can be shared by Xen later in this patch series) [ Impact: cleanup ] Signed-off-by: Alex Nixon <alex.nixon@citrix.com> Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: "H. Peter Anvin" <hpa@zytor.com> Reviewed-by: Matthew Wilcox <willy@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: x86@kernel.org
2010-10-17x86/PCI: MMCONFIG: fix region end calculationBjorn Helgaas
The end of an MMCONFIG region depends on the ending bus number, not on the number of buses the region covers. We previously computed the wrong ending address whenever the starting bus number was non-zero, e.g.,: MMCONFIG for [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) MMCONFIG for [bus 20-3f] at [mem 0xe2000000-0xe1ffffff] (base 0xe0000000) The correct regions are: MMCONFIG for [bus 00-1f] at [mem 0xe0000000-0xe1ffffff] (base 0xe0000000) MMCONFIG for [bus 20-3f] at [mem 0xe2000000-0xe3ffffff] (base 0xe0000000) Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-17PCI: update Intel chipset names and definesSeth Heasley
This patch updates the defines for Intel devices in include/linux/pci_ids.h, referenced in arch/x86/pci/irq.c and drivers/i2c/busses/i2c-i801.c, reflecting approved legal branding, and using fuller code-names for products under development. Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15x86/PCI: irq and pci_ids patch for Intel Patsburg DeviceIDsSeth Heasley
This patch adds the LPC Controller DeviceIDs for the Intel Patsburg PCH. Signed-off-by: Seth Heasley <seth.heasley@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-10-15PCI: OLPC: Only enable PCI configuration type override on XO-1Daniel Drake
This configuration type override is for XO-1 only and must not happen on XO-1.5. Acked-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30x86/PCI: use for_each_pci_dev()Kulikov Vasiliy
Use for_each_pci_dev() to simplify the code. Signed-off-by: Kulikov Vasiliy <segooon@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30x86/PCI: use host bridge _CRS info on ASRock ALiveSATA2-GLANBjorn Helgaas
This DMI quirk turns on "pci=use_crs" for the ALiveSATA2-GLAN because amd_bus.c doesn't handle this system correctly. The system has a single HyperTransport I/O chain, but has two PCI host bridges to buses 00 and 80. amd_bus.c learns the MMIO range associated with buses 00-ff and that this range is routed to the HT chain hosted at node 0, link 0: bus: [00, ff] on node 0 link 0 bus: 00 index 1 [mem 0x80000000-0xfcffffffff] This includes the address space for both bus 00 and bus 80, and amd_bus.c assumes it's all routed to bus 00. We find device 80:01.0, which BIOS left in the middle of that space, but we don't find a bridge from bus 00 to bus 80, so we conclude that 80:01.0 is unreachable from bus 00, and we move it from the original, working, address to something outside the bus 00 aperture, which does not work: pci 0000:80:01.0: reg 10: [mem 0xfebfc000-0xfebfffff 64bit] pci 0000:80:01.0: BAR 0: assigned [mem 0xfd00000000-0xfd00003fff 64bit] The BIOS told us everything we need to know to handle this correctly, so we're better off if we just pay attention, which lets us leave the 80:01.0 device at the original, working, address: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7f]) pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xff37ffff] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 80-ff]) pci_root PNP0A08:00: host bridge window [mem 0xfebfc000-0xfebfffff] This was a regression between 2.6.33 and 2.6.34. In 2.6.33, amd_bus.c was used only when we found multiple HT chains. 3e3da00c01d050, which enabled amd_bus.c even on systems with a single HT chain, caused this failure. This quirk was written by Graham. If we ever enable "pci=use_crs" for machines from 2006 or earlir, this quirk should be removed. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16007 Cc: stable@kernel.org Reported-by: Graham Ramsey <ramsey.graham@ntlworld.com> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30x86/PCI: Add option to not assign BAR's if not already assignedMike Habeck
The Linux kernel assigns BARs that a BIOS did not assign, most likely to handle broken BIOSes that didn't enumerate the devices correctly. On UV the BIOS purposely doesn't assign I/O BARs for certain devices/ drivers we know don't use them (examples, LSI SAS, Qlogic FC, ...). We purposely don't assign these I/O BARs because I/O Space is a very limited resource. There is only 64k of I/O Space, and in a PCIe topology that space gets divided up into 4k chucks (this is due to the fact that a pci-to-pci bridge's I/O decoder is aligned at 4k)... Thus a system can have at most 16 cards with I/O BARs: (64k / 4k = 16) SGI needs to scale to >16 devices with I/O BARs. So by not assigning I/O BARs on devices we know don't use them, we can do that (iff the kernel doesn't go and assign these BARs that the BIOS purposely didn't assign). This patch will not assign a resource to a device BAR if that BAR was not assigned by the BIOS, and the kernel cmdline option 'pci=nobar' was specified. This patch is closely modeled after the 'pci=norom' option that currently exists in the tree. Signed-off-by: Mike Habeck <habeck@sgi.com> Signed-off-by: Mike Travis <travis@sgi.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-30x86/PCI: pci, fix section mismatchJiri Slaby
pcibios_scan_specific_bus calls pci_scan_bus_on_node which is __devinit. Mark pcibios_scan_specific_bus __devinit as well since all users are now __init or __devinit. Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-07-19Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, pci, mrst: Add extra sanity check in walking the PCI extended cap chain x86: Fix x2apic preenabled system with kexec x86: Force HPET readback_cmp for all ATI chipsets
2010-07-16x86, pci, mrst: Add extra sanity check in walking the PCI extended cap chainJacob Pan
The fixed bar capability structure is searched in PCI extended configuration space. We need to make sure there is a valid capability ID to begin with otherwise, the search code may stuck in a infinite loop which results in boot hang. This patch adds additional check for cap ID 0, which is also invalid, and indicates end of chain. End of chain is supposed to have all fields zero, but that doesn't seem to always be the case in the field. Suggested-by: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> LKML-Reference: <1279306706-27087-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-07-16PCI: fall back to original BIOS BAR addressesBjorn Helgaas
If we fail to assign resources to a PCI BAR, this patch makes us try the original address from BIOS rather than leaving it disabled. Linux tries to make sure all PCI device BARs are inside the upstream PCI host bridge or P2P bridge apertures, reassigning BARs if necessary. Windows does similar reassignment. Before this patch, if we could not move a BAR into an aperture, we left the resource unassigned, i.e., at address zero. Windows leaves such BARs at the original BIOS addresses, and this patch makes Linux do the same. This is a bit ugly because we disable the resource long before we try to reassign it, so we have to keep track of the BIOS BAR address somewhere. For lack of a better place, I put it in the struct pci_dev. I think it would be cleaner to attempt the assignment immediately when the claim fails, so we could easily remember the original address. But we currently claim motherboard resources in the middle, after attempting to claim PCI resources and before assigning new PCI resources, and changing that is a fairly big job. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16263 Reported-by: Andrew <nitr0@seti.kr.ua> Tested-by: Andrew <nitr0@seti.kr.ua> Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-11Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: clear bridge resource range if BIOS assigned bad one PCI: hotplug/cpqphp, fix NULL dereference Revert "PCI: create function symlinks in /sys/bus/pci/slots/N/" PCI: change resource collision messages from KERN_ERR to KERN_INFO
2010-06-11PCI: clear bridge resource range if BIOS assigned bad oneYinghai Lu
Yannick found that video does not work with 2.6.34. The cause of this bug was that the BIOS had assigned the wrong range to the PCI bridge above the video device. Before 2.6.34 the kernel would have shrunk the size of the bridge window, but since d65245c PCI: don't shrink bridge resources the kernel will avoid shrinking BIOS ranges. So zero out the old range if we fail to claim it at boot time; this will cause us to allocate a new range at startup, restoring the 2.6.34 behavior. Fixes regression https://bugzilla.kernel.org/show_bug.cgi?id=16009. Reported-by: Yannick <yannick.roehlly@free.fr> Acked-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-06-04Merge branch 'linux_next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core * 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (83 commits) i7core_edac: Better describe the supported devices Add support for Westmere to i7core_edac driver i7core_edac: don't free on success i7core_edac: Add support for X5670 Always call i7core_[ur]dimm_check_mc_ecc_err i7core_edac: fix memory leak of i7core_dev EDAC: add __init to i7core_xeon_pci_fixup i7core_edac: Fix wrong device id for channel 1 devices i7core: add support for Lynnfield alternate address i7core_edac: Add initial support for Lynnfield i7core_edac: do not export static functions edac: fix i7core build edac: i7core_edac produces undefined behaviour on 32bit i7core_edac: Use a more generic approach for probing PCI devices i7core_edac: PCI device is called NONCORE, instead of NOCORE i7core_edac: Fix ringbuffer maxsize i7core_edac: First store, then increment i7core_edac: Better parse "any" addrmask i7core_edac: Use a lockless ringbuffer edac: Create an unique instance for each kobj ...
2010-05-30Merge branch 'x86-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, cpufeature: Unbreak compile with gcc 3.x x86, pat: Fix memory leak in free_memtype x86, k8: Fix section mismatch for powernowk8_exit() lib/atomic64_test: fix missing include of linux/kernel.h x86: remove last traces of quicklist usage x86, setup: Phoenix BIOS fixup is needed on Dell Inspiron Mini 1012 x86: "nosmp" command line option should force the system into UP mode arch/x86/pci: use kasprintf x86, apic: ack all pending irqs when crashed/on kexec
2010-05-28Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (27 commits) ACPI: Don't let acpi_pad needlessly mark TSC unstable drivers/acpi/sleep.h: Checkpatch cleanup ACPI: Minor cleanup eliminating redundant PMTIMER_TICKS to NS conversion ACPI: delete unused c-state promotion/demotion data strucutures ACPI: video: fix acpi_backlight=video ACPI: EC: Use kmemdup drivers/acpi: use kasprintf ACPI, APEI, EINJ injection parameters support Add x64 support to debugfs ACPI, APEI, Use ERST for persistent storage of MCE ACPI, APEI, Error Record Serialization Table (ERST) support ACPI, APEI, Generic Hardware Error Source memory error support ACPI, APEI, UEFI Common Platform Error Record (CPER) header Unified UUID/GUID definition ACPI Hardware Error Device (PNP0C33) support ACPI, APEI, PCIE AER, use general HEST table parsing in AER firmware_first setup ACPI, APEI, Document for APEI ACPI, APEI, EINJ support ACPI, APEI, HEST table parsing ACPI, APEI, APEI supporting infrastructure ...
2010-05-28Merge branch 'bjorn-pci-root-v4-2.6.35' into releaseLen Brown
2010-05-24arch/x86/pci: use kasprintfJulia Lawall
kasprintf combines kmalloc and sprintf, and takes care of the size calculation itself. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression a,flag; expression list args; statement S; @@ a = - \(kmalloc\|kzalloc\)(...,flag) + kasprintf(flag,args) <... when != a if (a == NULL || ...) S ...> - sprintf(a,args); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> LKML-Reference: <201005241913.o4OJDG3R010871@imap1.linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-05-21Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (36 commits) PCI: hotplug: pciehp: Removed check for hotplug of display devices PCI: read memory ranges out of Broadcom CNB20LE host bridge PCI: Allow manual resource allocation for PCI hotplug bridges x86/PCI: make ACPI MCFG reserved error messages ACPI specific PCI hotplug: Use kmemdup PM/PCI: Update PCI power management documentation PCI: output FW warning in pci_read/write_vpd PCI: fix typos pci_device_dis/enable to pci_dis/enable_device in comments PCI quirks: disable msi on AMD rs4xx internal gfx bridges PCI: Disable MSI for MCP55 on P5N32-E SLI x86/PCI: irq and pci_ids patch for additional Intel Cougar Point DeviceIDs PCI: aerdrv: trivial cleanup for aerdrv_core.c PCI: aerdrv: trivial cleanup for aerdrv.c PCI: aerdrv: introduce default_downstream_reset_link PCI: aerdrv: rework find_aer_service PCI: aerdrv: remove is_downstream PCI: aerdrv: remove magical ROOT_ERR_STATUS_MASKS PCI: aerdrv: redefine PCI_ERR_ROOT_*_SRC PCI: aerdrv: rework do_recovery PCI: aerdrv: rework get_e_source() ...
2010-05-21PCI: read memory ranges out of Broadcom CNB20LE host bridgeIra W. Snyder
Read the memory ranges behind the Broadcom CNB20LE host bridge out of the hardware. This allows PCI hotplugging to work, since we know which memory range to allocate PCI BAR's from. The x86 PCI code automatically prefers the ACPI _CRS information when it is available. In that case, this information is not used. Signed-off-by: Ira W. Snyder <iws@ovro.caltech.edu> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>