| Age | Commit message (Collapse) | Author |
|---|
|
This patch generates a warning if a counter is already active.
Implemented for AMD and P6 models. P4 is not supported.
Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com>
Cc: Shashi Belur <shashi-kiran.belur@hp.com>
Cc: Tony Jones <tonyj@suse.de>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Bye-bye Performance Counters, welcome Performance Events!
In the past few months the perfcounters subsystem has grown out its
initial role of counting hardware events, and has become (and is
becoming) a much broader generic event enumeration, reporting, logging,
monitoring, analysis facility.
Naming its core object 'perf_counter' and naming the subsystem
'perfcounters' has become more and more of a misnomer. With pending
code like hw-breakpoints support the 'counter' name is less and
less appropriate.
All in one, we've decided to rename the subsystem to 'performance
events' and to propagate this rename through all fields, variables
and API names. (in an ABI compatible fashion)
The word 'event' is also a bit shorter than 'counter' - which makes
it slightly more convenient to write/handle as well.
Thanks goes to Stephane Eranian who first observed this misnomer and
suggested a rename.
User-space tooling and ABI compatibility is not affected - this patch
should be function-invariant. (Also, defconfigs were not touched to
keep the size down.)
This patch has been generated via the following script:
FILES=$(find * -type f | grep -vE 'oprofile|[^K]config')
sed -i \
-e 's/PERF_EVENT_/PERF_RECORD_/g' \
-e 's/PERF_COUNTER/PERF_EVENT/g' \
-e 's/perf_counter/perf_event/g' \
-e 's/nb_counters/nb_events/g' \
-e 's/swcounter/swevent/g' \
-e 's/tpcounter_event/tp_event/g' \
$FILES
for N in $(find . -name perf_counter.[ch]); do
M=$(echo $N | sed 's/perf_counter/perf_event/g')
mv $N $M
done
FILES=$(find . -name perf_event.*)
sed -i \
-e 's/COUNTER_MASK/REG_MASK/g' \
-e 's/COUNTER/EVENT/g' \
-e 's/\<event\>/event_id/g' \
-e 's/counter/event/g' \
-e 's/Counter/Event/g' \
$FILES
... to keep it as correct as possible. This script can also be
used by anyone who has pending perfcounters patches - it converts
a Linux kernel tree over to the new naming. We tried to time this
change to the point in time where the amount of pending patches
is the smallest: the end of the merge window.
Namespace clashes were fixed up in a preparatory patch - and some
stylistic fallout will be fixed up in a subsequent patch.
( NOTE: 'counters' are still the proper terminology when we deal
with hardware registers - and these sed scripts are a bit
over-eager in renaming them. I've undone some of that, but
in case there's something left where 'counter' would be
better than 'event' we can undo that on an individual basis
instead of touching an otherwise nicely automated patch. )
Suggested-by: Stephane Eranian <eranian@google.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Paul Mackerras <paulus@samba.org>
Reviewed-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <linux-arch@vger.kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch implements a common x86 function to convert virtual counter
numbers to physical.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
The member num_virt_controls of struct op_x86_model_spec is not
used. This patch removes it.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
This patch removes the const qualifier from struct
op_x86_model_spec to make model parameters changable.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
This new function translates physical to virtual counter numbers.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
The number of hardware counters is limited. The multiplexing feature
enables OProfile to gather more events than counters are provided by
the hardware. This is realized by switching between events at an user
specified time interval.
A new file (/dev/oprofile/time_slice) is added for the user to specify
the timer interval in ms. If the number of events to profile is higher
than the number of hardware counters available, the patch will
schedule a work queue that switches the event counter and re-writes
the different sets of values into it. The switching mechanism needs to
be implemented for each architecture to support multiplexing. This
patch only implements AMD CPU support, but multiplexing can be easily
extended for other models and architectures.
There are follow-on patches that rework parts of this patch.
Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Conflicts:
arch/x86/oprofile/op_model_ppro.c
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
This patch removes struct op_saved_msr and replaces it by an u64
variable. This makes code easier and it is possible to use 64 bit MSR
functions.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
The patch replaces all CTR*_IS_RESERVED macros.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
The patch replaces all CTRL_SET_*ACTIVE macros. 64 bit MSR functions
and 64 bit counter values are used now. The code uses bit masks from
<asm/intel_arch_perfmon.h>.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
This patch introduces op_x86_get_ctrl() to calculate the value of the
performance control register. This is generic code usable for all
models. The event and reserved masks are model specific and stored in
struct op_x86_model_spec. 64 bit MSR functions are used now. The patch
removes many hard to read macros used for ctrl calculation.
The function op_x86_get_ctrl() is common code and the first step to
further merge performance counter implementations for x86 models.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
In follow-on patches the setup_ctrs() functions will need data that
describes the model. This patch extends the function argument list to
pass a pointer of the model to these function.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
This patch fixes missing braces around macro parameters. Macro
definitions from intel_arch_perfmon.h are used where possible.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
There are duplicate macro implementations in model specific code. This
patch moves all common macros to op_x86_model.h.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Some vertical alignments. Variables are now located in the beginning
of the struct.
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
The function arch_perfmon_init() in nmi_int.c is model specific. This
patch moves it to op_model_ppro.c by using the init function pointer
in struct op_x86_model_spec.
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
This reverts commit 59512900baab03c5629f2ff5efad1d5d4e682ece.
arch_perfmon_setup_counters() is actually never called for ppro, so
there is no code that changes the numbers in op_ppro_spec. The patch
as it is has no effect.
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Conflicts:
arch/x86/oprofile/op_model_ppro.c
|
|
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Discover number of counters for all family 6 models even when not
in arch perfmon mode.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Newer Intel CPUs (Core1+) have support for architectural
events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details.
The advantage of this is that it can be done without knowing about
the specific CPU, because the CPU describes by itself what
performance events are supported. This is only a fallback
because only a limited set of 6 events are supported.
This allows to do profiling on Nehalem and on Atom systems
(later not tested)
This patch implements support for that in oprofile's Intel
Family 6 profiling module. It also has the advantage of supporting
an arbitary number of events now as reported by the CPU.
Also allow arbitary counter widths >32bit while we're at it.
Requires a patched oprofile userland to support the new
architecture.
v2: update for latest oprofile tree
remove force_arch_perfmon
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
allow to modify it at runtime
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
|
|
Reverting commit 1a960b402a51d80abf54e3f8e4972374ffe5f22d for the main
branch. Multiplexing will be tracked on a separate feature branch.
Conflicts:
arch/x86/oprofile/nmi_int.c
|
|
This patch introduces multiplexing support for the Oprofile kernel
module. It basically adds a new function pointer in oprofile_operator
allowing each architecture to supply its callback to switch between
different sets of event when the timer expires. Userspace tools can
modify the time slice through /dev/oprofile/time_slice.
It also modifies the number of counters exposed to the userspace through
/dev/oprofile. For example, the number of counters for AMD CPUs are
changed to 32 and multiplexed in the sets of 4.
Signed-off-by: Jason Yeh <jason.yeh@amd.com>
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
These functions contain code for all AMD CPUs. The new names fit
better.
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Cc: Barry Kasindorf <barry.kasindorf@amd.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
This patch implements model specific OProfile init/exit functions for
x86 CPUs. Though there is more rework needed at the initialization
code, this new introduced functions allow it to keep model specific
code in the corresponding op_model_*.c files.
The function interface is the same as for oprofile_arch_init/exit().
Signed-off-by: Robert Richter <robert.richter@amd.com>
Cc: oprofile-list <oprofile-list@lists.sourceforge.net>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
|
Spelling fixes in arch/i386/.
Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Adrian Bunk <bunk@kernel.org>
|
|
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
|
