diff options
Diffstat (limited to 'drivers/staging/rt3070/common/rtmp_init.c')
| -rw-r--r-- | drivers/staging/rt3070/common/rtmp_init.c | 4198 |
1 files changed, 1 insertions, 4197 deletions
diff --git a/drivers/staging/rt3070/common/rtmp_init.c b/drivers/staging/rt3070/common/rtmp_init.c index 4503f6c6d95..4709e5f28a8 100644 --- a/drivers/staging/rt3070/common/rtmp_init.c +++ b/drivers/staging/rt3070/common/rtmp_init.c @@ -1,4197 +1 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* - - Module Name: - rtmp_init.c - - Abstract: - Miniport generic portion header file - - Revision History: - Who When What - -------- ---------- ---------------------------------------------- - Paul Lin 2002-08-01 created - John Chang 2004-08-20 RT2561/2661 use scatter-gather scheme - Jan Lee 2006-09-15 RT2860. Change for 802.11n , EEPROM, Led, BA, HT. -*/ -#include "../rt_config.h" -#include "../firmware.h" - -//#define BIN_IN_FILE /* use *.bin firmware */ - -UCHAR BIT8[] = {0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80}; -ULONG BIT32[] = {0x00000001, 0x00000002, 0x00000004, 0x00000008, - 0x00000010, 0x00000020, 0x00000040, 0x00000080, - 0x00000100, 0x00000200, 0x00000400, 0x00000800, - 0x00001000, 0x00002000, 0x00004000, 0x00008000, - 0x00010000, 0x00020000, 0x00040000, 0x00080000, - 0x00100000, 0x00200000, 0x00400000, 0x00800000, - 0x01000000, 0x02000000, 0x04000000, 0x08000000, - 0x10000000, 0x20000000, 0x40000000, 0x80000000}; - -char* CipherName[] = {"none","wep64","wep128","TKIP","AES","CKIP64","CKIP128"}; - -const unsigned short ccitt_16Table[] = { - 0x0000, 0x1021, 0x2042, 0x3063, 0x4084, 0x50A5, 0x60C6, 0x70E7, - 0x8108, 0x9129, 0xA14A, 0xB16B, 0xC18C, 0xD1AD, 0xE1CE, 0xF1EF, - 0x1231, 0x0210, 0x3273, 0x2252, 0x52B5, 0x4294, 0x72F7, 0x62D6, - 0x9339, 0x8318, 0xB37B, 0xA35A, 0xD3BD, 0xC39C, 0xF3FF, 0xE3DE, - 0x2462, 0x3443, 0x0420, 0x1401, 0x64E6, 0x74C7, 0x44A4, 0x5485, - 0xA56A, 0xB54B, 0x8528, 0x9509, 0xE5EE, 0xF5CF, 0xC5AC, 0xD58D, - 0x3653, 0x2672, 0x1611, 0x0630, 0x76D7, 0x66F6, 0x5695, 0x46B4, - 0xB75B, 0xA77A, 0x9719, 0x8738, 0xF7DF, 0xE7FE, 0xD79D, 0xC7BC, - 0x48C4, 0x58E5, 0x6886, 0x78A7, 0x0840, 0x1861, 0x2802, 0x3823, - 0xC9CC, 0xD9ED, 0xE98E, 0xF9AF, 0x8948, 0x9969, 0xA90A, 0xB92B, - 0x5AF5, 0x4AD4, 0x7AB7, 0x6A96, 0x1A71, 0x0A50, 0x3A33, 0x2A12, - 0xDBFD, 0xCBDC, 0xFBBF, 0xEB9E, 0x9B79, 0x8B58, 0xBB3B, 0xAB1A, - 0x6CA6, 0x7C87, 0x4CE4, 0x5CC5, 0x2C22, 0x3C03, 0x0C60, 0x1C41, - 0xEDAE, 0xFD8F, 0xCDEC, 0xDDCD, 0xAD2A, 0xBD0B, 0x8D68, 0x9D49, - 0x7E97, 0x6EB6, 0x5ED5, 0x4EF4, 0x3E13, 0x2E32, 0x1E51, 0x0E70, - 0xFF9F, 0xEFBE, 0xDFDD, 0xCFFC, 0xBF1B, 0xAF3A, 0x9F59, 0x8F78, - 0x9188, 0x81A9, 0xB1CA, 0xA1EB, 0xD10C, 0xC12D, 0xF14E, 0xE16F, - 0x1080, 0x00A1, 0x30C2, 0x20E3, 0x5004, 0x4025, 0x7046, 0x6067, - 0x83B9, 0x9398, 0xA3FB, 0xB3DA, 0xC33D, 0xD31C, 0xE37F, 0xF35E, - 0x02B1, 0x1290, 0x22F3, 0x32D2, 0x4235, 0x5214, 0x6277, 0x7256, - 0xB5EA, 0xA5CB, 0x95A8, 0x8589, 0xF56E, 0xE54F, 0xD52C, 0xC50D, - 0x34E2, 0x24C3, 0x14A0, 0x0481, 0x7466, 0x6447, 0x5424, 0x4405, - 0xA7DB, 0xB7FA, 0x8799, 0x97B8, 0xE75F, 0xF77E, 0xC71D, 0xD73C, - 0x26D3, 0x36F2, 0x0691, 0x16B0, 0x6657, 0x7676, 0x4615, 0x5634, - 0xD94C, 0xC96D, 0xF90E, 0xE92F, 0x99C8, 0x89E9, 0xB98A, 0xA9AB, - 0x5844, 0x4865, 0x7806, 0x6827, 0x18C0, 0x08E1, 0x3882, 0x28A3, - 0xCB7D, 0xDB5C, 0xEB3F, 0xFB1E, 0x8BF9, 0x9BD8, 0xABBB, 0xBB9A, - 0x4A75, 0x5A54, 0x6A37, 0x7A16, 0x0AF1, 0x1AD0, 0x2AB3, 0x3A92, - 0xFD2E, 0xED0F, 0xDD6C, 0xCD4D, 0xBDAA, 0xAD8B, 0x9DE8, 0x8DC9, - 0x7C26, 0x6C07, 0x5C64, 0x4C45, 0x3CA2, 0x2C83, 0x1CE0, 0x0CC1, - 0xEF1F, 0xFF3E, 0xCF5D, 0xDF7C, 0xAF9B, 0xBFBA, 0x8FD9, 0x9FF8, - 0x6E17, 0x7E36, 0x4E55, 0x5E74, 0x2E93, 0x3EB2, 0x0ED1, 0x1EF0 -}; -#define ByteCRC16(v, crc) \ - (unsigned short)((crc << 8) ^ ccitt_16Table[((crc >> 8) ^ (v)) & 255]) - -unsigned char BitReverse(unsigned char x) -{ - int i; - unsigned char Temp=0; - for(i=0; ; i++) - { - if(x & 0x80) Temp |= 0x80; - if(i==7) break; - x <<= 1; - Temp >>= 1; - } - return Temp; -} - -// -// BBP register initialization set -// -REG_PAIR BBPRegTable[] = { - {BBP_R65, 0x2C}, // fix rssi issue - {BBP_R66, 0x38}, // Also set this default value to pAd->BbpTuning.R66CurrentValue at initial - {BBP_R69, 0x12}, - {BBP_R70, 0xa}, // BBP_R70 will change to 0x8 in ApStartUp and LinkUp for rt2860C, otherwise value is 0xa - {BBP_R73, 0x10}, - {BBP_R81, 0x37}, - {BBP_R82, 0x62}, - {BBP_R83, 0x6A}, - {BBP_R84, 0x99}, // 0x19 is for rt2860E and after. This is for extension channel overlapping IOT. 0x99 is for rt2860D and before - {BBP_R86, 0x00}, // middle range issue, Rory @2008-01-28 - {BBP_R91, 0x04}, // middle range issue, Rory @2008-01-28 - {BBP_R92, 0x00}, // middle range issue, Rory @2008-01-28 - {BBP_R103, 0x00}, // near range high-power issue, requested from Gary @2008-0528 - {BBP_R105, 0x05}, // 0x05 is for rt2860E to turn on FEQ control. It is safe for rt2860D and before, because Bit 7:2 are reserved in rt2860D and before. -}; -#define NUM_BBP_REG_PARMS (sizeof(BBPRegTable) / sizeof(REG_PAIR)) - -// -// RF register initialization set -// -#ifdef RT30xx -REG_PAIR RT30xx_RFRegTable[] = { - {RF_R04, 0x40}, - {RF_R05, 0x03}, - {RF_R06, 0x02}, - {RF_R07, 0x70}, - {RF_R09, 0x0F}, - {RF_R10, 0x41}, - {RF_R11, 0x21}, - {RF_R12, 0x7B}, - {RF_R14, 0x90}, - {RF_R15, 0x58}, - {RF_R16, 0xB3}, - {RF_R17, 0x92}, - {RF_R18, 0x2C}, - {RF_R19, 0x02}, - {RF_R20, 0xBA}, - {RF_R21, 0xDB}, - {RF_R24, 0x16}, - {RF_R25, 0x01}, - {RF_R29, 0x1F}, -}; -#define NUM_RF_REG_PARMS (sizeof(RT30xx_RFRegTable) / sizeof(REG_PAIR)) -#endif // RT30xx // - -// -// ASIC register initialization sets -// - -RTMP_REG_PAIR MACRegTable[] = { -#if defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x200) - {BCN_OFFSET0, 0xf8f0e8e0}, /* 0x3800(e0), 0x3A00(e8), 0x3C00(f0), 0x3E00(f8), 512B for each beacon */ - {BCN_OFFSET1, 0x6f77d0c8}, /* 0x3200(c8), 0x3400(d0), 0x1DC0(77), 0x1BC0(6f), 512B for each beacon */ -#elif defined(HW_BEACON_OFFSET) && (HW_BEACON_OFFSET == 0x100) - {BCN_OFFSET0, 0xece8e4e0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */ - {BCN_OFFSET1, 0xfcf8f4f0}, /* 0x3800, 0x3A00, 0x3C00, 0x3E00, 512B for each beacon */ -#else - #error You must re-calculate new value for BCN_OFFSET0 & BCN_OFFSET1 in MACRegTable[]!!! -#endif // HW_BEACON_OFFSET // - - {LEGACY_BASIC_RATE, 0x0000013f}, // Basic rate set bitmap - {HT_BASIC_RATE, 0x00008003}, // Basic HT rate set , 20M, MCS=3, MM. Format is the same as in TXWI. - {MAC_SYS_CTRL, 0x00}, // 0x1004, , default Disable RX - {RX_FILTR_CFG, 0x17f97}, //0x1400 , RX filter control, - {BKOFF_SLOT_CFG, 0x209}, // default set short slot time, CC_DELAY_TIME should be 2 - //{TX_SW_CFG0, 0x40a06}, // Gary,2006-08-23 - {TX_SW_CFG0, 0x0}, // Gary,2008-05-21 for CWC test - {TX_SW_CFG1, 0x80606}, // Gary,2006-08-23 - {TX_LINK_CFG, 0x1020}, // Gary,2006-08-23 - {TX_TIMEOUT_CFG, 0x000a2090}, - {MAX_LEN_CFG, MAX_AGGREGATION_SIZE | 0x00001000}, // 0x3018, MAX frame length. Max PSDU = 16kbytes. - {LED_CFG, 0x7f031e46}, // Gary, 2006-08-23 - -//#ifdef CONFIG_STA_SUPPORT -// {WMM_AIFSN_CFG, 0x00002273}, -// {WMM_CWMIN_CFG, 0x00002344}, -// {WMM_CWMAX_CFG, 0x000034aa}, -//#endif // CONFIG_STA_SUPPORT // -#ifdef INF_AMAZON_SE - {PBF_MAX_PCNT, 0x1F3F6F6F}, //iverson modify for usb issue, 2008/09/19 - // 6F + 6F < total page count FE - // so that RX doesn't occupy TX's buffer space when WMM congestion. -#else - {PBF_MAX_PCNT, 0x1F3FBF9F}, //0x1F3f7f9f}, //Jan, 2006/04/20 -#endif // INF_AMAZON_SE // - //{TX_RTY_CFG, 0x6bb80408}, // Jan, 2006/11/16 - {TX_RTY_CFG, 0x47d01f0f}, // Jan, 2006/11/16, Set TxWI->ACK =0 in Probe Rsp Modify for 2860E ,2007-08-03 - {AUTO_RSP_CFG, 0x00000013}, // Initial Auto_Responder, because QA will turn off Auto-Responder - {CCK_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. - {OFDM_PROT_CFG, 0x05740003 /*0x01740003*/}, // Initial Auto_Responder, because QA will turn off Auto-Responder. And RTS threshold is enabled. -//PS packets use Tx1Q (for HCCA) when dequeue from PS unicast queue (WiFi WPA2 MA9_DT1 for Marvell B STA) -#ifdef RT2870 -#ifdef CONFIG_STA_SUPPORT - {PBF_CFG, 0xf40006}, // Only enable Queue 2 -#endif // CONFIG_STA_SUPPORT // - {MM40_PROT_CFG, 0x3F44084}, // Initial Auto_Responder, because QA will turn off Auto-Responder - {WPDMA_GLO_CFG, 0x00000030}, -#endif // RT2870 // - {GF20_PROT_CFG, 0x01744004}, // set 19:18 --> Short NAV for MIMO PS - {GF40_PROT_CFG, 0x03F44084}, - {MM20_PROT_CFG, 0x01744004}, - {TXOP_CTRL_CFG, 0x0000583f, /*0x0000243f*/ /*0x000024bf*/}, //Extension channel backoff. - {TX_RTS_CFG, 0x00092b20}, -//#ifdef WIFI_TEST - {EXP_ACK_TIME, 0x002400ca}, // default value -//#else -// {EXP_ACK_TIME, 0x005400ca}, // suggested by Gray @ 20070323 for 11n intel-sta throughput -//#endif // end - WIFI_TEST // - {TXOP_HLDR_ET, 0x00000002}, - - /* Jerry comments 2008/01/16: we use SIFS = 10us in CCK defaultly, but it seems that 10us - is too small for INTEL 2200bg card, so in MBSS mode, the delta time between beacon0 - and beacon1 is SIFS (10us), so if INTEL 2200bg card connects to BSS0, the ping - will always lost. So we change the SIFS of CCK from 10us to 16us. */ - {XIFS_TIME_CFG, 0x33a41010}, - {PWR_PIN_CFG, 0x00000003}, // patch for 2880-E -}; - - -#ifdef CONFIG_STA_SUPPORT -RTMP_REG_PAIR STAMACRegTable[] = { - {WMM_AIFSN_CFG, 0x00002273}, - {WMM_CWMIN_CFG, 0x00002344}, - {WMM_CWMAX_CFG, 0x000034aa}, -}; -#endif // CONFIG_STA_SUPPORT // - -#define NUM_MAC_REG_PARMS (sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR)) -#ifdef CONFIG_STA_SUPPORT -#define NUM_STA_MAC_REG_PARMS (sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR)) -#endif // CONFIG_STA_SUPPORT // - -#ifdef RT2870 -// -// RT2870 Firmware Spec only used 1 oct for version expression -// -#define FIRMWARE_MINOR_VERSION 7 - -#endif // RT2870 // - -// New 8k byte firmware size for RT3071/RT3072 -#define FIRMWAREIMAGE_MAX_LENGTH 0x2000 -#define FIRMWAREIMAGE_LENGTH (sizeof (FirmwareImage) / sizeof(UCHAR)) -#define FIRMWARE_MAJOR_VERSION 0 - -#define FIRMWAREIMAGEV1_LENGTH 0x1000 -#define FIRMWAREIMAGEV2_LENGTH 0x1000 - - - -/* - ======================================================================== - - Routine Description: - Allocate RTMP_ADAPTER data block and do some initialization - - Arguments: - Adapter Pointer to our adapter - - Return Value: - NDIS_STATUS_SUCCESS - NDIS_STATUS_FAILURE - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -NDIS_STATUS RTMPAllocAdapterBlock( - IN PVOID handle, - OUT PRTMP_ADAPTER *ppAdapter) -{ - PRTMP_ADAPTER pAd; - NDIS_STATUS Status; - INT index; - UCHAR *pBeaconBuf = NULL; - - DBGPRINT(RT_DEBUG_TRACE, ("--> RTMPAllocAdapterBlock\n")); - - *ppAdapter = NULL; - - do - { - // Allocate RTMP_ADAPTER memory block - pBeaconBuf = kmalloc(MAX_BEACON_SIZE, MEM_ALLOC_FLAG); - if (pBeaconBuf == NULL) - { - Status = NDIS_STATUS_FAILURE; - DBGPRINT_ERR(("Failed to allocate memory - BeaconBuf!\n")); - break; - } - - Status = AdapterBlockAllocateMemory(handle, (PVOID *)&pAd); - if (Status != NDIS_STATUS_SUCCESS) - { - DBGPRINT_ERR(("Failed to allocate memory - ADAPTER\n")); - break; - } - pAd->BeaconBuf = pBeaconBuf; - printk("\n\n=== pAd = %p, size = %d ===\n\n", pAd, (UINT32)sizeof(RTMP_ADAPTER)); - - - // Init spin locks - NdisAllocateSpinLock(&pAd->MgmtRingLock); - - for (index =0 ; index < NUM_OF_TX_RING; index++) - { - NdisAllocateSpinLock(&pAd->TxSwQueueLock[index]); - NdisAllocateSpinLock(&pAd->DeQueueLock[index]); - pAd->DeQueueRunning[index] = FALSE; - } - - NdisAllocateSpinLock(&pAd->irq_lock); - - } while (FALSE); - - if ((Status != NDIS_STATUS_SUCCESS) && (pBeaconBuf)) - kfree(pBeaconBuf); - - *ppAdapter = pAd; - - DBGPRINT_S(Status, ("<-- RTMPAllocAdapterBlock, Status=%x\n", Status)); - return Status; -} - -/* - ======================================================================== - - Routine Description: - Read initial Tx power per MCS and BW from EEPROM - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -VOID RTMPReadTxPwrPerRate( - IN PRTMP_ADAPTER pAd) -{ - ULONG data, Adata, Gdata; - USHORT i, value, value2; - INT Apwrdelta, Gpwrdelta; - UCHAR t1,t2,t3,t4; - BOOLEAN bValid, bApwrdeltaMinus = TRUE, bGpwrdeltaMinus = TRUE; - - // - // Get power delta for 20MHz and 40MHz. - // - DBGPRINT(RT_DEBUG_TRACE, ("Txpower per Rate\n")); - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_DELTA, value2); - Apwrdelta = 0; - Gpwrdelta = 0; - - if ((value2 & 0xff) != 0xff) - { - if ((value2 & 0x80)) - Gpwrdelta = (value2&0xf); - - if ((value2 & 0x40)) - bGpwrdeltaMinus = FALSE; - else - bGpwrdeltaMinus = TRUE; - } - if ((value2 & 0xff00) != 0xff00) - { - if ((value2 & 0x8000)) - Apwrdelta = ((value2&0xf00)>>8); - - if ((value2 & 0x4000)) - bApwrdeltaMinus = FALSE; - else - bApwrdeltaMinus = TRUE; - } - DBGPRINT(RT_DEBUG_TRACE, ("Gpwrdelta = %x, Apwrdelta = %x .\n", Gpwrdelta, Apwrdelta)); - - // - // Get Txpower per MCS for 20MHz in 2.4G. - // - for (i=0; i<5; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i*4, value); - data = value; - if (bApwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Apwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Apwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Apwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Apwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Apwrdelta) - t1 = (value&0xf)-(Apwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Apwrdelta) - t2 = ((value&0xf0)>>4)-(Apwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Apwrdelta) - t3 = ((value&0xf00)>>8)-(Apwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Apwrdelta) - t4 = ((value&0xf000)>>12)-(Apwrdelta); - else - t4 = 0; - } - Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12); - if (bGpwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Gpwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Gpwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Gpwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Gpwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Gpwrdelta) - t1 = (value&0xf)-(Gpwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Gpwrdelta) - t2 = ((value&0xf0)>>4)-(Gpwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Gpwrdelta) - t3 = ((value&0xf00)>>8)-(Gpwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Gpwrdelta) - t4 = ((value&0xf000)>>12)-(Gpwrdelta); - else - t4 = 0; - } - Gdata = t1 + (t2<<4) + (t3<<8) + (t4<<12); - - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_2_4G + i*4 + 2, value); - if (bApwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Apwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Apwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Apwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Apwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Apwrdelta) - t1 = (value&0xf)-(Apwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Apwrdelta) - t2 = ((value&0xf0)>>4)-(Apwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Apwrdelta) - t3 = ((value&0xf00)>>8)-(Apwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Apwrdelta) - t4 = ((value&0xf000)>>12)-(Apwrdelta); - else - t4 = 0; - } - Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28)); - if (bGpwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Gpwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Gpwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Gpwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Gpwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Gpwrdelta) - t1 = (value&0xf)-(Gpwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Gpwrdelta) - t2 = ((value&0xf0)>>4)-(Gpwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Gpwrdelta) - t3 = ((value&0xf00)>>8)-(Gpwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Gpwrdelta) - t4 = ((value&0xf000)>>12)-(Gpwrdelta); - else - t4 = 0; - } - Gdata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28)); - data |= (value<<16); - - pAd->Tx20MPwrCfgABand[i] = pAd->Tx40MPwrCfgABand[i] = Adata; - pAd->Tx20MPwrCfgGBand[i] = pAd->Tx40MPwrCfgGBand[i] = Gdata; - - if (data != 0xffffffff) - RTMP_IO_WRITE32(pAd, TX_PWR_CFG_0 + i*4, data); - DBGPRINT_RAW(RT_DEBUG_TRACE, ("20MHz BW, 2.4G band-%lx, Adata = %lx, Gdata = %lx \n", data, Adata, Gdata)); - } - - // - // Check this block is valid for 40MHz in 2.4G. If invalid, use parameter for 20MHz in 2.4G - // - bValid = TRUE; - for (i=0; i<6; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + 2 + i*2, value); - if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00)) - { - bValid = FALSE; - break; - } - } - - // - // Get Txpower per MCS for 40MHz in 2.4G. - // - if (bValid) - { - for (i=0; i<4; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + i*4, value); - if (bGpwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Gpwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Gpwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Gpwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Gpwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Gpwrdelta) - t1 = (value&0xf)-(Gpwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Gpwrdelta) - t2 = ((value&0xf0)>>4)-(Gpwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Gpwrdelta) - t3 = ((value&0xf00)>>8)-(Gpwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Gpwrdelta) - t4 = ((value&0xf000)>>12)-(Gpwrdelta); - else - t4 = 0; - } - Gdata = t1 + (t2<<4) + (t3<<8) + (t4<<12); - - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_2_4G + i*4 + 2, value); - if (bGpwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Gpwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Gpwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Gpwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Gpwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Gpwrdelta) - t1 = (value&0xf)-(Gpwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Gpwrdelta) - t2 = ((value&0xf0)>>4)-(Gpwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Gpwrdelta) - t3 = ((value&0xf00)>>8)-(Gpwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Gpwrdelta) - t4 = ((value&0xf000)>>12)-(Gpwrdelta); - else - t4 = 0; - } - Gdata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28)); - - if (i == 0) - pAd->Tx40MPwrCfgGBand[i+1] = (pAd->Tx40MPwrCfgGBand[i+1] & 0x0000FFFF) | (Gdata & 0xFFFF0000); - else - pAd->Tx40MPwrCfgGBand[i+1] = Gdata; - - DBGPRINT_RAW(RT_DEBUG_TRACE, ("40MHz BW, 2.4G band, Gdata = %lx \n", Gdata)); - } - } - - // - // Check this block is valid for 20MHz in 5G. If invalid, use parameter for 20MHz in 2.4G - // - bValid = TRUE; - for (i=0; i<8; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + 2 + i*2, value); - if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00)) - { - bValid = FALSE; - break; - } - } - - // - // Get Txpower per MCS for 20MHz in 5G. - // - if (bValid) - { - for (i=0; i<5; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + i*4, value); - if (bApwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Apwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Apwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Apwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Apwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Apwrdelta) - t1 = (value&0xf)-(Apwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Apwrdelta) - t2 = ((value&0xf0)>>4)-(Apwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Apwrdelta) - t3 = ((value&0xf00)>>8)-(Apwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Apwrdelta) - t4 = ((value&0xf000)>>12)-(Apwrdelta); - else - t4 = 0; - } - Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12); - - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_20MHZ_5G + i*4 + 2, value); - if (bApwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Apwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Apwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Apwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Apwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Apwrdelta) - t1 = (value&0xf)-(Apwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Apwrdelta) - t2 = ((value&0xf0)>>4)-(Apwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Apwrdelta) - t3 = ((value&0xf00)>>8)-(Apwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Apwrdelta) - t4 = ((value&0xf000)>>12)-(Apwrdelta); - else - t4 = 0; - } - Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28)); - - if (i == 0) - pAd->Tx20MPwrCfgABand[i] = (pAd->Tx20MPwrCfgABand[i] & 0x0000FFFF) | (Adata & 0xFFFF0000); - else - pAd->Tx20MPwrCfgABand[i] = Adata; - - DBGPRINT_RAW(RT_DEBUG_TRACE, ("20MHz BW, 5GHz band, Adata = %lx \n", Adata)); - } - } - - // - // Check this block is valid for 40MHz in 5G. If invalid, use parameter for 20MHz in 2.4G - // - bValid = TRUE; - for (i=0; i<6; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + 2 + i*2, value); - if (((value & 0x00FF) == 0x00FF) || ((value & 0xFF00) == 0xFF00)) - { - bValid = FALSE; - break; - } - } - - // - // Get Txpower per MCS for 40MHz in 5G. - // - if (bValid) - { - for (i=0; i<4; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + i*4, value); - if (bApwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Apwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Apwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Apwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Apwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Apwrdelta) - t1 = (value&0xf)-(Apwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Apwrdelta) - t2 = ((value&0xf0)>>4)-(Apwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Apwrdelta) - t3 = ((value&0xf00)>>8)-(Apwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Apwrdelta) - t4 = ((value&0xf000)>>12)-(Apwrdelta); - else - t4 = 0; - } - Adata = t1 + (t2<<4) + (t3<<8) + (t4<<12); - - RT28xx_EEPROM_READ16(pAd, EEPROM_TXPOWER_BYRATE_40MHZ_5G + i*4 + 2, value); - if (bApwrdeltaMinus == FALSE) - { - t1 = (value&0xf)+(Apwrdelta); - if (t1 > 0xf) - t1 = 0xf; - t2 = ((value&0xf0)>>4)+(Apwrdelta); - if (t2 > 0xf) - t2 = 0xf; - t3 = ((value&0xf00)>>8)+(Apwrdelta); - if (t3 > 0xf) - t3 = 0xf; - t4 = ((value&0xf000)>>12)+(Apwrdelta); - if (t4 > 0xf) - t4 = 0xf; - } - else - { - if ((value&0xf) > Apwrdelta) - t1 = (value&0xf)-(Apwrdelta); - else - t1 = 0; - if (((value&0xf0)>>4) > Apwrdelta) - t2 = ((value&0xf0)>>4)-(Apwrdelta); - else - t2 = 0; - if (((value&0xf00)>>8) > Apwrdelta) - t3 = ((value&0xf00)>>8)-(Apwrdelta); - else - t3 = 0; - if (((value&0xf000)>>12) > Apwrdelta) - t4 = ((value&0xf000)>>12)-(Apwrdelta); - else - t4 = 0; - } - Adata |= ((t1<<16) + (t2<<20) + (t3<<24) + (t4<<28)); - - if (i == 0) - pAd->Tx40MPwrCfgABand[i+1] = (pAd->Tx40MPwrCfgABand[i+1] & 0x0000FFFF) | (Adata & 0xFFFF0000); - else - pAd->Tx40MPwrCfgABand[i+1] = Adata; - - DBGPRINT_RAW(RT_DEBUG_TRACE, ("40MHz BW, 5GHz band, Adata = %lx \n", Adata)); - } - } -} - - -/* - ======================================================================== - - Routine Description: - Read initial channel power parameters from EEPROM - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -VOID RTMPReadChannelPwr( - IN PRTMP_ADAPTER pAd) -{ - UCHAR i, choffset; - EEPROM_TX_PWR_STRUC Power; - EEPROM_TX_PWR_STRUC Power2; - - // Read Tx power value for all channels - // Value from 1 - 0x7f. Default value is 24. - // Power value : 2.4G 0x00 (0) ~ 0x1F (31) - // : 5.5G 0xF9 (-7) ~ 0x0F (15) - - // 0. 11b/g, ch1 - ch 14 - for (i = 0; i < 7; i++) - { -// Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2); -// Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_G_TX2_PWR_OFFSET + i * 2); - RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX_PWR_OFFSET + i * 2, Power.word); - RT28xx_EEPROM_READ16(pAd, EEPROM_G_TX2_PWR_OFFSET + i * 2, Power2.word); - pAd->TxPower[i * 2].Channel = i * 2 + 1; - pAd->TxPower[i * 2 + 1].Channel = i * 2 + 2; - - if ((Power.field.Byte0 > 31) || (Power.field.Byte0 < 0)) - pAd->TxPower[i * 2].Power = DEFAULT_RF_TX_POWER; - else - pAd->TxPower[i * 2].Power = Power.field.Byte0; - - if ((Power.field.Byte1 > 31) || (Power.field.Byte1 < 0)) - pAd->TxPower[i * 2 + 1].Power = DEFAULT_RF_TX_POWER; - else - pAd->TxPower[i * 2 + 1].Power = Power.field.Byte1; - - if ((Power2.field.Byte0 > 31) || (Power2.field.Byte0 < 0)) - pAd->TxPower[i * 2].Power2 = DEFAULT_RF_TX_POWER; - else - pAd->TxPower[i * 2].Power2 = Power2.field.Byte0; - - if ((Power2.field.Byte1 > 31) || (Power2.field.Byte1 < 0)) - pAd->TxPower[i * 2 + 1].Power2 = DEFAULT_RF_TX_POWER; - else - pAd->TxPower[i * 2 + 1].Power2 = Power2.field.Byte1; - } - - // 1. U-NII lower/middle band: 36, 38, 40; 44, 46, 48; 52, 54, 56; 60, 62, 64 (including central frequency in BW 40MHz) - // 1.1 Fill up channel - choffset = 14; - for (i = 0; i < 4; i++) - { - pAd->TxPower[3 * i + choffset + 0].Channel = 36 + i * 8 + 0; - pAd->TxPower[3 * i + choffset + 0].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 0].Power2 = DEFAULT_RF_TX_POWER; - - pAd->TxPower[3 * i + choffset + 1].Channel = 36 + i * 8 + 2; - pAd->TxPower[3 * i + choffset + 1].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 1].Power2 = DEFAULT_RF_TX_POWER; - - pAd->TxPower[3 * i + choffset + 2].Channel = 36 + i * 8 + 4; - pAd->TxPower[3 * i + choffset + 2].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 2].Power2 = DEFAULT_RF_TX_POWER; - } - - // 1.2 Fill up power - for (i = 0; i < 6; i++) - { -// Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2); -// Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + i * 2); - RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + i * 2, Power.word); - RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + i * 2, Power2.word); - - if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7)) - pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0; - - if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7)) - pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1; - - if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7)) - pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0; - - if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7)) - pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1; - } - - // 2. HipperLAN 2 100, 102 ,104; 108, 110, 112; 116, 118, 120; 124, 126, 128; 132, 134, 136; 140 (including central frequency in BW 40MHz) - // 2.1 Fill up channel - choffset = 14 + 12; - for (i = 0; i < 5; i++) - { - pAd->TxPower[3 * i + choffset + 0].Channel = 100 + i * 8 + 0; - pAd->TxPower[3 * i + choffset + 0].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 0].Power2 = DEFAULT_RF_TX_POWER; - - pAd->TxPower[3 * i + choffset + 1].Channel = 100 + i * 8 + 2; - pAd->TxPower[3 * i + choffset + 1].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 1].Power2 = DEFAULT_RF_TX_POWER; - - pAd->TxPower[3 * i + choffset + 2].Channel = 100 + i * 8 + 4; - pAd->TxPower[3 * i + choffset + 2].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 2].Power2 = DEFAULT_RF_TX_POWER; - } - pAd->TxPower[3 * 5 + choffset + 0].Channel = 140; - pAd->TxPower[3 * 5 + choffset + 0].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * 5 + choffset + 0].Power2 = DEFAULT_RF_TX_POWER; - - // 2.2 Fill up power - for (i = 0; i < 8; i++) - { -// Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2); -// Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2); - RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2, Power.word); - RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2, Power2.word); - - if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7)) - pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0; - - if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7)) - pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1; - - if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7)) - pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0; - - if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7)) - pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1; - } - - // 3. U-NII upper band: 149, 151, 153; 157, 159, 161; 165 (including central frequency in BW 40MHz) - // 3.1 Fill up channel - choffset = 14 + 12 + 16; - for (i = 0; i < 2; i++) - { - pAd->TxPower[3 * i + choffset + 0].Channel = 149 + i * 8 + 0; - pAd->TxPower[3 * i + choffset + 0].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 0].Power2 = DEFAULT_RF_TX_POWER; - - pAd->TxPower[3 * i + choffset + 1].Channel = 149 + i * 8 + 2; - pAd->TxPower[3 * i + choffset + 1].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 1].Power2 = DEFAULT_RF_TX_POWER; - - pAd->TxPower[3 * i + choffset + 2].Channel = 149 + i * 8 + 4; - pAd->TxPower[3 * i + choffset + 2].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * i + choffset + 2].Power2 = DEFAULT_RF_TX_POWER; - } - pAd->TxPower[3 * 2 + choffset + 0].Channel = 165; - pAd->TxPower[3 * 2 + choffset + 0].Power = DEFAULT_RF_TX_POWER; - pAd->TxPower[3 * 2 + choffset + 0].Power2 = DEFAULT_RF_TX_POWER; - - // 3.2 Fill up power - for (i = 0; i < 4; i++) - { -// Power.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2); -// Power2.word = RTMP_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2); - RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX_PWR_OFFSET + (choffset - 14) + i * 2, Power.word); - RT28xx_EEPROM_READ16(pAd, EEPROM_A_TX2_PWR_OFFSET + (choffset - 14) + i * 2, Power2.word); - - if ((Power.field.Byte0 < 16) && (Power.field.Byte0 >= -7)) - pAd->TxPower[i * 2 + choffset + 0].Power = Power.field.Byte0; - - if ((Power.field.Byte1 < 16) && (Power.field.Byte1 >= -7)) - pAd->TxPower[i * 2 + choffset + 1].Power = Power.field.Byte1; - - if ((Power2.field.Byte0 < 16) && (Power2.field.Byte0 >= -7)) - pAd->TxPower[i * 2 + choffset + 0].Power2 = Power2.field.Byte0; - - if ((Power2.field.Byte1 < 16) && (Power2.field.Byte1 >= -7)) - pAd->TxPower[i * 2 + choffset + 1].Power2 = Power2.field.Byte1; - } - - // 4. Print and Debug - choffset = 14 + 12 + 16 + 7; - -} - -/* - ======================================================================== - - Routine Description: - Read the following from the registry - 1. All the parameters - 2. NetworkAddres - - Arguments: - Adapter Pointer to our adapter - WrapperConfigurationContext For use by NdisOpenConfiguration - - Return Value: - NDIS_STATUS_SUCCESS - NDIS_STATUS_FAILURE - NDIS_STATUS_RESOURCES - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -NDIS_STATUS NICReadRegParameters( - IN PRTMP_ADAPTER pAd, - IN NDIS_HANDLE WrapperConfigurationContext - ) -{ - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - DBGPRINT_S(Status, ("<-- NICReadRegParameters, Status=%x\n", Status)); - return Status; -} - - -#ifdef RT30xx -/* - ======================================================================== - - Routine Description: - For RF filter calibration purpose - - Arguments: - pAd Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - ======================================================================== -*/ -VOID RTMPFilterCalibration( - IN PRTMP_ADAPTER pAd) -{ - UCHAR R55x = 0, value, FilterTarget = 0x1E, BBPValue=0; - UINT loop = 0, count = 0, loopcnt = 0, ReTry = 0; - UCHAR RF_R24_Value = 0; - - // Give bbp filter initial value - pAd->Mlme.CaliBW20RfR24 = 0x1F; - pAd->Mlme.CaliBW40RfR24 = 0x2F; //Bit[5] must be 1 for BW 40 - - do - { - if (loop == 1) //BandWidth = 40 MHz - { - // Write 0x27 to RF_R24 to program filter - RF_R24_Value = 0x27; - RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); - if (IS_RT3090(pAd)) - FilterTarget = 0x15; - else - FilterTarget = 0x19; - - // when calibrate BW40, BBP mask must set to BW40. - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue&= (~0x18); - BBPValue|= (0x10); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - - // set to BW40 - RT30xxReadRFRegister(pAd, RF_R31, &value); - value |= 0x20; - RT30xxWriteRFRegister(pAd, RF_R31, value); - } - else //BandWidth = 20 MHz - { - // Write 0x07 to RF_R24 to program filter - RF_R24_Value = 0x07; - RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); - if (IS_RT3090(pAd)) - FilterTarget = 0x13; - else - FilterTarget = 0x16; - - // set to BW20 - RT30xxReadRFRegister(pAd, RF_R31, &value); - value &= (~0x20); - RT30xxWriteRFRegister(pAd, RF_R31, value); - } - - // Write 0x01 to RF_R22 to enable baseband loopback mode - RT30xxReadRFRegister(pAd, RF_R22, &value); - value |= 0x01; - RT30xxWriteRFRegister(pAd, RF_R22, value); - - // Write 0x00 to BBP_R24 to set power & frequency of passband test tone - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); - - do - { - // Write 0x90 to BBP_R25 to transmit test tone - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); - - RTMPusecDelay(1000); - // Read BBP_R55[6:0] for received power, set R55x = BBP_R55[6:0] - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); - R55x = value & 0xFF; - - } while ((ReTry++ < 100) && (R55x == 0)); - - // Write 0x06 to BBP_R24 to set power & frequency of stopband test tone - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0x06); - - while(TRUE) - { - // Write 0x90 to BBP_R25 to transmit test tone - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R25, 0x90); - - //We need to wait for calibration - RTMPusecDelay(1000); - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R55, &value); - value &= 0xFF; - if ((R55x - value) < FilterTarget) - { - RF_R24_Value ++; - } - else if ((R55x - value) == FilterTarget) - { - RF_R24_Value ++; - count ++; - } - else - { - break; - } - - // prevent infinite loop cause driver hang. - if (loopcnt++ > 100) - { - DBGPRINT(RT_DEBUG_ERROR, ("RTMPFilterCalibration - can't find a valid value, loopcnt=%d stop calibrating", loopcnt)); - break; - } - - // Write RF_R24 to program filter - RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); - } - - if (count > 0) - { - RF_R24_Value = RF_R24_Value - ((count) ? (1) : (0)); - } - - // Store for future usage - if (loopcnt < 100) - { - if (loop++ == 0) - { - //BandWidth = 20 MHz - pAd->Mlme.CaliBW20RfR24 = (UCHAR)RF_R24_Value; - } - else - { - //BandWidth = 40 MHz - pAd->Mlme.CaliBW40RfR24 = (UCHAR)RF_R24_Value; - break; - } - } - else - break; - - RT30xxWriteRFRegister(pAd, RF_R24, RF_R24_Value); - - // reset count - count = 0; - } while(TRUE); - - // - // Set back to initial state - // - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R24, 0); - - RT30xxReadRFRegister(pAd, RF_R22, &value); - value &= ~(0x01); - RT30xxWriteRFRegister(pAd, RF_R22, value); - - // set BBP back to BW20 - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue&= (~0x18); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPFilterCalibration - CaliBW20RfR24=0x%x, CaliBW40RfR24=0x%x\n", pAd->Mlme.CaliBW20RfR24, pAd->Mlme.CaliBW40RfR24)); -} -#endif // RT30xx // - - -#ifdef RT3070 -VOID NICInitRT30xxRFRegisters(IN PRTMP_ADAPTER pAd) -{ - INT i; - // Driver must read EEPROM to get RfIcType before initial RF registers - // Initialize RF register to default value - if (IS_RT3070(pAd) || IS_RT3071(pAd)) - { - // Init RF calibration - // Driver should toggle RF R30 bit7 before init RF registers - UINT32 RfReg = 0; - UINT32 data; - - RT30xxReadRFRegister(pAd, RF_R30, (PUCHAR)&RfReg); - RfReg |= 0x80; - RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); - RTMPusecDelay(1000); - RfReg &= 0x7F; - RT30xxWriteRFRegister(pAd, RF_R30, (UCHAR)RfReg); - - // Initialize RF register to default value - for (i = 0; i < NUM_RF_REG_PARMS; i++) - { - RT30xxWriteRFRegister(pAd, RT30xx_RFRegTable[i].Register, RT30xx_RFRegTable[i].Value); - } - - // add by johnli - if (IS_RT3070(pAd)) - { - // Update MAC 0x05D4 from 01xxxxxx to 0Dxxxxxx (voltage 1.2V to 1.35V) for RT3070 to improve yield rate - RTUSBReadMACRegister(pAd, LDO_CFG0, &data); - data = ((data & 0xF0FFFFFF) | 0x0D000000); - RTUSBWriteMACRegister(pAd, LDO_CFG0, data); - } - else if (IS_RT3071(pAd)) - { - // Driver should set RF R6 bit6 on before init RF registers - RT30xxReadRFRegister(pAd, RF_R06, (PUCHAR)&RfReg); - RfReg |= 0x40; - RT30xxWriteRFRegister(pAd, RF_R06, (UCHAR)RfReg); - - // init R31 - RT30xxWriteRFRegister(pAd, RF_R31, 0x14); - - // RT3071 version E has fixed this issue - if ((pAd->NicConfig2.field.DACTestBit == 1) && ((pAd->MACVersion & 0xffff) < 0x0211)) - { - // patch tx EVM issue temporarily - RTUSBReadMACRegister(pAd, LDO_CFG0, &data); - data = ((data & 0xE0FFFFFF) | 0x0D000000); - RTUSBWriteMACRegister(pAd, LDO_CFG0, data); - } - else - { - RTMP_IO_READ32(pAd, LDO_CFG0, &data); - data = ((data & 0xE0FFFFFF) | 0x01000000); - RTMP_IO_WRITE32(pAd, LDO_CFG0, data); - } - - // patch LNA_PE_G1 failed issue - RTUSBReadMACRegister(pAd, GPIO_SWITCH, &data); - data &= ~(0x20); - RTUSBWriteMACRegister(pAd, GPIO_SWITCH, data); - } - - //For RF filter Calibration - RTMPFilterCalibration(pAd); - - // Initialize RF R27 register, set RF R27 must be behind RTMPFilterCalibration() - if ((pAd->MACVersion & 0xffff) < 0x0211) - RT30xxWriteRFRegister(pAd, RF_R27, 0x3); - - // set led open drain enable - RTUSBReadMACRegister(pAd, OPT_14, &data); - data |= 0x01; - RTUSBWriteMACRegister(pAd, OPT_14, data); - - if (IS_RT3071(pAd)) - { - // add by johnli, RF power sequence setup, load RF normal operation-mode setup - RT30xxLoadRFNormalModeSetup(pAd); - } - } - -} -#endif // RT3070 // - - -/* - ======================================================================== - - Routine Description: - Read initial parameters from EEPROM - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -VOID NICReadEEPROMParameters( - IN PRTMP_ADAPTER pAd, - IN PUCHAR mac_addr) -{ - UINT32 data = 0; - USHORT i, value, value2; - UCHAR TmpPhy; - EEPROM_TX_PWR_STRUC Power; - EEPROM_VERSION_STRUC Version; - EEPROM_ANTENNA_STRUC Antenna; - EEPROM_NIC_CONFIG2_STRUC NicConfig2; - - DBGPRINT(RT_DEBUG_TRACE, ("--> NICReadEEPROMParameters\n")); - - // Init EEPROM Address Number, before access EEPROM; if 93c46, EEPROMAddressNum=6, else if 93c66, EEPROMAddressNum=8 - RTMP_IO_READ32(pAd, E2PROM_CSR, &data); - DBGPRINT(RT_DEBUG_TRACE, ("--> E2PROM_CSR = 0x%x\n", data)); - - if((data & 0x30) == 0) - pAd->EEPROMAddressNum = 6; // 93C46 - else if((data & 0x30) == 0x10) - pAd->EEPROMAddressNum = 8; // 93C66 - else - pAd->EEPROMAddressNum = 8; // 93C86 - DBGPRINT(RT_DEBUG_TRACE, ("--> EEPROMAddressNum = %d\n", pAd->EEPROMAddressNum )); - - // RT2860 MAC no longer auto load MAC address from E2PROM. Driver has to intialize - // MAC address registers according to E2PROM setting - if (mac_addr == NULL || - strlen(mac_addr) != 17 || - mac_addr[2] != ':' || mac_addr[5] != ':' || mac_addr[8] != ':' || - mac_addr[11] != ':' || mac_addr[14] != ':') - { - USHORT Addr01,Addr23,Addr45 ; - - RT28xx_EEPROM_READ16(pAd, 0x04, Addr01); - RT28xx_EEPROM_READ16(pAd, 0x06, Addr23); - RT28xx_EEPROM_READ16(pAd, 0x08, Addr45); - - pAd->PermanentAddress[0] = (UCHAR)(Addr01 & 0xff); - pAd->PermanentAddress[1] = (UCHAR)(Addr01 >> 8); - pAd->PermanentAddress[2] = (UCHAR)(Addr23 & 0xff); - pAd->PermanentAddress[3] = (UCHAR)(Addr23 >> 8); - pAd->PermanentAddress[4] = (UCHAR)(Addr45 & 0xff); - pAd->PermanentAddress[5] = (UCHAR)(Addr45 >> 8); - - DBGPRINT(RT_DEBUG_TRACE, ("Initialize MAC Address from E2PROM \n")); - } - else - { - INT j; - PUCHAR macptr; - - macptr = mac_addr; - - for (j=0; j<MAC_ADDR_LEN; j++) - { - AtoH(macptr, &pAd->PermanentAddress[j], 1); - macptr=macptr+3; - } - - DBGPRINT(RT_DEBUG_TRACE, ("Initialize MAC Address from module parameter \n")); - } - - - { - //more conveninet to test mbssid, so ap's bssid &0xf1 - if (pAd->PermanentAddress[0] == 0xff) - pAd->PermanentAddress[0] = RandomByte(pAd)&0xf8; - - //if (pAd->PermanentAddress[5] == 0xff) - // pAd->PermanentAddress[5] = RandomByte(pAd)&0xf8; - - DBGPRINT_RAW(RT_DEBUG_TRACE,("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n", - pAd->PermanentAddress[0], pAd->PermanentAddress[1], - pAd->PermanentAddress[2], pAd->PermanentAddress[3], - pAd->PermanentAddress[4], pAd->PermanentAddress[5])); - if (pAd->bLocalAdminMAC == FALSE) - { - MAC_DW0_STRUC csr2; - MAC_DW1_STRUC csr3; - COPY_MAC_ADDR(pAd->CurrentAddress, pAd->PermanentAddress); - csr2.field.Byte0 = pAd->CurrentAddress[0]; - csr2.field.Byte1 = pAd->CurrentAddress[1]; - csr2.field.Byte2 = pAd->CurrentAddress[2]; - csr2.field.Byte3 = pAd->CurrentAddress[3]; - RTMP_IO_WRITE32(pAd, MAC_ADDR_DW0, csr2.word); - csr3.word = 0; - csr3.field.Byte4 = pAd->CurrentAddress[4]; - csr3.field.Byte5 = pAd->CurrentAddress[5]; - csr3.field.U2MeMask = 0xff; - RTMP_IO_WRITE32(pAd, MAC_ADDR_DW1, csr3.word); - DBGPRINT_RAW(RT_DEBUG_TRACE,("E2PROM MAC: =%02x:%02x:%02x:%02x:%02x:%02x\n", - pAd->PermanentAddress[0], pAd->PermanentAddress[1], - pAd->PermanentAddress[2], pAd->PermanentAddress[3], - pAd->PermanentAddress[4], pAd->PermanentAddress[5])); - } - } - - // if not return early. cause fail at emulation. - // Init the channel number for TX channel power - RTMPReadChannelPwr(pAd); - - // if E2PROM version mismatch with driver's expectation, then skip - // all subsequent E2RPOM retieval and set a system error bit to notify GUI - RT28xx_EEPROM_READ16(pAd, EEPROM_VERSION_OFFSET, Version.word); - pAd->EepromVersion = Version.field.Version + Version.field.FaeReleaseNumber * 256; - DBGPRINT(RT_DEBUG_TRACE, ("E2PROM: Version = %d, FAE release #%d\n", Version.field.Version, Version.field.FaeReleaseNumber)); - - if (Version.field.Version > VALID_EEPROM_VERSION) - { - DBGPRINT_ERR(("E2PROM: WRONG VERSION 0x%x, should be %d\n",Version.field.Version, VALID_EEPROM_VERSION)); - /*pAd->SystemErrorBitmap |= 0x00000001; - - // hard-code default value when no proper E2PROM installed - pAd->bAutoTxAgcA = FALSE; - pAd->bAutoTxAgcG = FALSE; - - // Default the channel power - for (i = 0; i < MAX_NUM_OF_CHANNELS; i++) - pAd->TxPower[i].Power = DEFAULT_RF_TX_POWER; - - // Default the channel power - for (i = 0; i < MAX_NUM_OF_11JCHANNELS; i++) - pAd->TxPower11J[i].Power = DEFAULT_RF_TX_POWER; - - for(i = 0; i < NUM_EEPROM_BBP_PARMS; i++) - pAd->EEPROMDefaultValue[i] = 0xffff; - return; */ - } - - // Read BBP default value from EEPROM and store to array(EEPROMDefaultValue) in pAd - RT28xx_EEPROM_READ16(pAd, EEPROM_NIC1_OFFSET, value); - pAd->EEPROMDefaultValue[0] = value; - - RT28xx_EEPROM_READ16(pAd, EEPROM_NIC2_OFFSET, value); - pAd->EEPROMDefaultValue[1] = value; - - RT28xx_EEPROM_READ16(pAd, 0x38, value); // Country Region - pAd->EEPROMDefaultValue[2] = value; - - for(i = 0; i < 8; i++) - { - RT28xx_EEPROM_READ16(pAd, EEPROM_BBP_BASE_OFFSET + i*2, value); - pAd->EEPROMDefaultValue[i+3] = value; - } - - // We have to parse NIC configuration 0 at here. - // If TSSI did not have preloaded value, it should reset the TxAutoAgc to false - // Therefore, we have to read TxAutoAgc control beforehand. - // Read Tx AGC control bit - Antenna.word = pAd->EEPROMDefaultValue[0]; - if (Antenna.word == 0xFFFF) - { -#ifdef RT30xx - if(IS_RT3090(pAd)) - { - Antenna.word = 0; - Antenna.field.RfIcType = RFIC_3020; - Antenna.field.TxPath = 1; - Antenna.field.RxPath = 1; - } - else - { -#endif // RT30xx // - Antenna.word = 0; - Antenna.field.RfIcType = RFIC_2820; - Antenna.field.TxPath = 1; - Antenna.field.RxPath = 2; - DBGPRINT(RT_DEBUG_WARN, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); -#ifdef RT30xx - } -#endif // RT30xx // - } - - // Choose the desired Tx&Rx stream. - if ((pAd->CommonCfg.TxStream == 0) || (pAd->CommonCfg.TxStream > Antenna.field.TxPath)) - pAd->CommonCfg.TxStream = Antenna.field.TxPath; - - if ((pAd->CommonCfg.RxStream == 0) || (pAd->CommonCfg.RxStream > Antenna.field.RxPath)) - { - pAd->CommonCfg.RxStream = Antenna.field.RxPath; - - if ((pAd->MACVersion < RALINK_2883_VERSION) && - (pAd->CommonCfg.RxStream > 2)) - { - // only 2 Rx streams for RT2860 series - pAd->CommonCfg.RxStream = 2; - } - } - - // 3*3 - // read value from EEPROM and set them to CSR174 ~ 177 in chain0 ~ chain2 - // yet implement - for(i=0; i<3; i++) - { - } - - NicConfig2.word = pAd->EEPROMDefaultValue[1]; - - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if ((NicConfig2.word & 0x00ff) == 0xff) - { - NicConfig2.word &= 0xff00; - } - - if ((NicConfig2.word >> 8) == 0xff) - { - NicConfig2.word &= 0x00ff; - } - } -#endif // CONFIG_STA_SUPPORT // - - if (NicConfig2.field.DynamicTxAgcControl == 1) - pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE; - else - pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE; - - DBGPRINT_RAW(RT_DEBUG_TRACE, ("NICReadEEPROMParameters: RxPath = %d, TxPath = %d\n", Antenna.field.RxPath, Antenna.field.TxPath)); - - // Save the antenna for future use - pAd->Antenna.word = Antenna.word; - - // - // Reset PhyMode if we don't support 802.11a - // Only RFIC_2850 & RFIC_2750 support 802.11a - // - if ((Antenna.field.RfIcType != RFIC_2850) && (Antenna.field.RfIcType != RFIC_2750)) - { - if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED) || - (pAd->CommonCfg.PhyMode == PHY_11A)) - pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; -#ifdef DOT11_N_SUPPORT - else if ((pAd->CommonCfg.PhyMode == PHY_11ABGN_MIXED) || - (pAd->CommonCfg.PhyMode == PHY_11AN_MIXED) || - (pAd->CommonCfg.PhyMode == PHY_11AGN_MIXED) || - (pAd->CommonCfg.PhyMode == PHY_11N_5G)) - pAd->CommonCfg.PhyMode = PHY_11BGN_MIXED; -#endif // DOT11_N_SUPPORT // - } - - // Read TSSI reference and TSSI boundary for temperature compensation. This is ugly - // 0. 11b/g - { - /* these are tempature reference value (0x00 ~ 0xFE) - ex: 0x00 0x15 0x25 0x45 0x88 0xA0 0xB5 0xD0 0xF0 - TssiPlusBoundaryG [4] [3] [2] [1] [0] (smaller) + - TssiMinusBoundaryG[0] [1] [2] [3] [4] (larger) */ - RT28xx_EEPROM_READ16(pAd, 0x6E, Power.word); - pAd->TssiMinusBoundaryG[4] = Power.field.Byte0; - pAd->TssiMinusBoundaryG[3] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0x70, Power.word); - pAd->TssiMinusBoundaryG[2] = Power.field.Byte0; - pAd->TssiMinusBoundaryG[1] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0x72, Power.word); - pAd->TssiRefG = Power.field.Byte0; /* reference value [0] */ - pAd->TssiPlusBoundaryG[1] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0x74, Power.word); - pAd->TssiPlusBoundaryG[2] = Power.field.Byte0; - pAd->TssiPlusBoundaryG[3] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0x76, Power.word); - pAd->TssiPlusBoundaryG[4] = Power.field.Byte0; - pAd->TxAgcStepG = Power.field.Byte1; - pAd->TxAgcCompensateG = 0; - pAd->TssiMinusBoundaryG[0] = pAd->TssiRefG; - pAd->TssiPlusBoundaryG[0] = pAd->TssiRefG; - - // Disable TxAgc if the based value is not right - if (pAd->TssiRefG == 0xff) - pAd->bAutoTxAgcG = FALSE; - - DBGPRINT(RT_DEBUG_TRACE,("E2PROM: G Tssi[-4 .. +4] = %d %d %d %d - %d -%d %d %d %d, step=%d, tuning=%d\n", - pAd->TssiMinusBoundaryG[4], pAd->TssiMinusBoundaryG[3], pAd->TssiMinusBoundaryG[2], pAd->TssiMinusBoundaryG[1], - pAd->TssiRefG, - pAd->TssiPlusBoundaryG[1], pAd->TssiPlusBoundaryG[2], pAd->TssiPlusBoundaryG[3], pAd->TssiPlusBoundaryG[4], - pAd->TxAgcStepG, pAd->bAutoTxAgcG)); - } - // 1. 11a - { - RT28xx_EEPROM_READ16(pAd, 0xD4, Power.word); - pAd->TssiMinusBoundaryA[4] = Power.field.Byte0; - pAd->TssiMinusBoundaryA[3] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0xD6, Power.word); - pAd->TssiMinusBoundaryA[2] = Power.field.Byte0; - pAd->TssiMinusBoundaryA[1] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0xD8, Power.word); - pAd->TssiRefA = Power.field.Byte0; - pAd->TssiPlusBoundaryA[1] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0xDA, Power.word); - pAd->TssiPlusBoundaryA[2] = Power.field.Byte0; - pAd->TssiPlusBoundaryA[3] = Power.field.Byte1; - RT28xx_EEPROM_READ16(pAd, 0xDC, Power.word); - pAd->TssiPlusBoundaryA[4] = Power.field.Byte0; - pAd->TxAgcStepA = Power.field.Byte1; - pAd->TxAgcCompensateA = 0; - pAd->TssiMinusBoundaryA[0] = pAd->TssiRefA; - pAd->TssiPlusBoundaryA[0] = pAd->TssiRefA; - - // Disable TxAgc if the based value is not right - if (pAd->TssiRefA == 0xff) - pAd->bAutoTxAgcA = FALSE; - - DBGPRINT(RT_DEBUG_TRACE,("E2PROM: A Tssi[-4 .. +4] = %d %d %d %d - %d -%d %d %d %d, step=%d, tuning=%d\n", - pAd->TssiMinusBoundaryA[4], pAd->TssiMinusBoundaryA[3], pAd->TssiMinusBoundaryA[2], pAd->TssiMinusBoundaryA[1], - pAd->TssiRefA, - pAd->TssiPlusBoundaryA[1], pAd->TssiPlusBoundaryA[2], pAd->TssiPlusBoundaryA[3], pAd->TssiPlusBoundaryA[4], - pAd->TxAgcStepA, pAd->bAutoTxAgcA)); - } - pAd->BbpRssiToDbmDelta = 0x0; - - // Read frequency offset setting for RF - RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value); - if ((value & 0x00FF) != 0x00FF) - pAd->RfFreqOffset = (ULONG) (value & 0x00FF); - else - pAd->RfFreqOffset = 0; - DBGPRINT(RT_DEBUG_TRACE, ("E2PROM: RF FreqOffset=0x%lx \n", pAd->RfFreqOffset)); - - //CountryRegion byte offset (38h) - value = pAd->EEPROMDefaultValue[2] >> 8; // 2.4G band - value2 = pAd->EEPROMDefaultValue[2] & 0x00FF; // 5G band - - if ((value <= REGION_MAXIMUM_BG_BAND) && (value2 <= REGION_MAXIMUM_A_BAND)) - { - pAd->CommonCfg.CountryRegion = ((UCHAR) value) | 0x80; - pAd->CommonCfg.CountryRegionForABand = ((UCHAR) value2) | 0x80; - TmpPhy = pAd->CommonCfg.PhyMode; - pAd->CommonCfg.PhyMode = 0xff; - RTMPSetPhyMode(pAd, TmpPhy); -#ifdef DOT11_N_SUPPORT - SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // - } - - // - // Get RSSI Offset on EEPROM 0x9Ah & 0x9Ch. - // The valid value are (-10 ~ 10) - // - RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET, value); - pAd->BGRssiOffset0 = value & 0x00ff; - pAd->BGRssiOffset1 = (value >> 8); - RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_BG_OFFSET+2, value); - pAd->BGRssiOffset2 = value & 0x00ff; - pAd->ALNAGain1 = (value >> 8); - RT28xx_EEPROM_READ16(pAd, EEPROM_LNA_OFFSET, value); - pAd->BLNAGain = value & 0x00ff; - pAd->ALNAGain0 = (value >> 8); - - // Validate 11b/g RSSI_0 offset. - if ((pAd->BGRssiOffset0 < -10) || (pAd->BGRssiOffset0 > 10)) - pAd->BGRssiOffset0 = 0; - - // Validate 11b/g RSSI_1 offset. - if ((pAd->BGRssiOffset1 < -10) || (pAd->BGRssiOffset1 > 10)) - pAd->BGRssiOffset1 = 0; - - // Validate 11b/g RSSI_2 offset. - if ((pAd->BGRssiOffset2 < -10) || (pAd->BGRssiOffset2 > 10)) - pAd->BGRssiOffset2 = 0; - - RT28xx_EEPROM_READ16(pAd, EEPROM_RSSI_A_OFFSET, value); - pAd->ARssiOffset0 = value & 0x00ff; - pAd->ARssiOffset1 = (value >> 8); - RT28xx_EEPROM_READ16(pAd, (EEPROM_RSSI_A_OFFSET+2), value); - pAd->ARssiOffset2 = value & 0x00ff; - pAd->ALNAGain2 = (value >> 8); - - if (((UCHAR)pAd->ALNAGain1 == 0xFF) || (pAd->ALNAGain1 == 0x00)) - pAd->ALNAGain1 = pAd->ALNAGain0; - if (((UCHAR)pAd->ALNAGain2 == 0xFF) || (pAd->ALNAGain2 == 0x00)) - pAd->ALNAGain2 = pAd->ALNAGain0; - - // Validate 11a RSSI_0 offset. - if ((pAd->ARssiOffset0 < -10) || (pAd->ARssiOffset0 > 10)) - pAd->ARssiOffset0 = 0; - - // Validate 11a RSSI_1 offset. - if ((pAd->ARssiOffset1 < -10) || (pAd->ARssiOffset1 > 10)) - pAd->ARssiOffset1 = 0; - - //Validate 11a RSSI_2 offset. - if ((pAd->ARssiOffset2 < -10) || (pAd->ARssiOffset2 > 10)) - pAd->ARssiOffset2 = 0; - - // - // Get LED Setting. - // - RT28xx_EEPROM_READ16(pAd, 0x3a, value); - pAd->LedCntl.word = (value&0xff00) >> 8; - RT28xx_EEPROM_READ16(pAd, EEPROM_LED1_OFFSET, value); - pAd->Led1 = value; - RT28xx_EEPROM_READ16(pAd, EEPROM_LED2_OFFSET, value); - pAd->Led2 = value; - RT28xx_EEPROM_READ16(pAd, EEPROM_LED3_OFFSET, value); - pAd->Led3 = value; - - RTMPReadTxPwrPerRate(pAd); - -#ifdef SINGLE_SKU - //pAd->CommonCfg.DefineMaxTxPwr = RTMP_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR); - RT28xx_EEPROM_READ16(pAd, EEPROM_DEFINE_MAX_TXPWR, pAd->CommonCfg.DefineMaxTxPwr); -#endif // SINGLE_SKU // -#ifdef RT30xx - if (IS_RT30xx(pAd)) - { - eFusePhysicalReadRegisters(pAd, EFUSE_TAG, 2, &value); - pAd->EFuseTag = (value & 0xff); - } -#endif // RT30xx // - - DBGPRINT(RT_DEBUG_TRACE, ("<-- NICReadEEPROMParameters\n")); -} - -/* - ======================================================================== - - Routine Description: - Set default value from EEPROM - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -VOID NICInitAsicFromEEPROM( - IN PRTMP_ADAPTER pAd) -{ -#ifdef CONFIG_STA_SUPPORT - UINT32 data = 0; - UCHAR BBPR1 = 0; -#endif // CONFIG_STA_SUPPORT // - USHORT i; - EEPROM_ANTENNA_STRUC Antenna; - EEPROM_NIC_CONFIG2_STRUC NicConfig2; - UCHAR BBPR3 = 0; - - DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitAsicFromEEPROM\n")); - for(i = 3; i < NUM_EEPROM_BBP_PARMS; i++) - { - UCHAR BbpRegIdx, BbpValue; - - if ((pAd->EEPROMDefaultValue[i] != 0xFFFF) && (pAd->EEPROMDefaultValue[i] != 0)) - { - BbpRegIdx = (UCHAR)(pAd->EEPROMDefaultValue[i] >> 8); - BbpValue = (UCHAR)(pAd->EEPROMDefaultValue[i] & 0xff); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BbpRegIdx, BbpValue); - } - } - - Antenna.word = pAd->EEPROMDefaultValue[0]; - if (Antenna.word == 0xFFFF) - { - DBGPRINT(RT_DEBUG_ERROR, ("E2PROM error, hard code as 0x%04x\n", Antenna.word)); - BUG_ON(Antenna.word == 0xFFFF); - } - pAd->Mlme.RealRxPath = (UCHAR) Antenna.field.RxPath; - pAd->RfIcType = (UCHAR) Antenna.field.RfIcType; - - DBGPRINT(RT_DEBUG_WARN, ("pAd->RfIcType = %d, RealRxPath=%d, TxPath = %d\n", pAd->RfIcType, pAd->Mlme.RealRxPath,Antenna.field.TxPath)); - - // Save the antenna for future use - pAd->Antenna.word = Antenna.word; - - NicConfig2.word = pAd->EEPROMDefaultValue[1]; - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if ((NicConfig2.word & 0x00ff) == 0xff) - { - NicConfig2.word &= 0xff00; - } - - if ((NicConfig2.word >> 8) == 0xff) - { - NicConfig2.word &= 0x00ff; - } - } -#endif // CONFIG_STA_SUPPORT // - - // Save the antenna for future use - pAd->NicConfig2.word = NicConfig2.word; - - // set default antenna as main - if (pAd->RfIcType == RFIC_3020) - AsicSetRxAnt(pAd, pAd->RxAnt.Pair1PrimaryRxAnt); - - // - // Send LED Setting to MCU. - // - if (pAd->LedCntl.word == 0xFF) - { - pAd->LedCntl.word = 0x01; - pAd->Led1 = 0x5555; - pAd->Led2 = 0x2221; - -#ifdef RT2870 - pAd->Led3 = 0x5627; -#endif // RT2870 // - } - - AsicSendCommandToMcu(pAd, 0x52, 0xff, (UCHAR)pAd->Led1, (UCHAR)(pAd->Led1 >> 8)); - AsicSendCommandToMcu(pAd, 0x53, 0xff, (UCHAR)pAd->Led2, (UCHAR)(pAd->Led2 >> 8)); - AsicSendCommandToMcu(pAd, 0x54, 0xff, (UCHAR)pAd->Led3, (UCHAR)(pAd->Led3 >> 8)); - pAd->LedIndicatorStregth = 0xFF; - RTMPSetSignalLED(pAd, -100); // Force signal strength Led to be turned off, before link up - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Read Hardware controlled Radio state enable bit - if (NicConfig2.field.HardwareRadioControl == 1) - { - pAd->StaCfg.bHardwareRadio = TRUE; - - // Read GPIO pin2 as Hardware controlled radio state - RTMP_IO_READ32(pAd, GPIO_CTRL_CFG, &data); - if ((data & 0x04) == 0) - { - pAd->StaCfg.bHwRadio = FALSE; - pAd->StaCfg.bRadio = FALSE; -// RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818); - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); - } - } - else - pAd->StaCfg.bHardwareRadio = FALSE; - - if (pAd->StaCfg.bRadio == FALSE) - { - RTMPSetLED(pAd, LED_RADIO_OFF); - } - else - { - RTMPSetLED(pAd, LED_RADIO_ON); - } - } -#endif // CONFIG_STA_SUPPORT // - - // Turn off patching for cardbus controller - if (NicConfig2.field.CardbusAcceleration == 1) - { -// pAd->bTest1 = TRUE; - } - - if (NicConfig2.field.DynamicTxAgcControl == 1) - pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE; - else - pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = FALSE; - // - // Since BBP has been progamed, to make sure BBP setting will be - // upate inside of AsicAntennaSelect, so reset to UNKNOWN_BAND!! - // - pAd->CommonCfg.BandState = UNKNOWN_BAND; - - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3); - BBPR3 &= (~0x18); - if(pAd->Antenna.field.RxPath == 3) - { - BBPR3 |= (0x10); - } - else if(pAd->Antenna.field.RxPath == 2) - { - BBPR3 |= (0x8); - } - else if(pAd->Antenna.field.RxPath == 1) - { - BBPR3 |= (0x0); - } - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // Handle the difference when 1T - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &BBPR1); - if(pAd->Antenna.field.TxPath == 1) - { - BBPR1 &= (~0x18); - } - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R1, BBPR1); - - DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio)); - } -#endif // CONFIG_STA_SUPPORT // - DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word)); - DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n")); -} - -/* - ======================================================================== - - Routine Description: - Initialize NIC hardware - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -NDIS_STATUS NICInitializeAdapter( - IN PRTMP_ADAPTER pAd, - IN BOOLEAN bHardReset) -{ - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - WPDMA_GLO_CFG_STRUC GloCfg; -// INT_MASK_CSR_STRUC IntMask; - ULONG i =0, j=0; - AC_TXOP_CSR0_STRUC csr0; - - DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAdapter\n")); - - // 3. Set DMA global configuration except TX_DMA_EN and RX_DMA_EN bits: -retry: - i = 0; - do - { - RTMP_IO_READ32(pAd, WPDMA_GLO_CFG, &GloCfg.word); - if ((GloCfg.field.TxDMABusy == 0) && (GloCfg.field.RxDMABusy == 0)) - break; - - RTMPusecDelay(1000); - i++; - }while ( i<100); - DBGPRINT(RT_DEBUG_TRACE, ("<== DMA offset 0x208 = 0x%x\n", GloCfg.word)); - GloCfg.word &= 0xff0; - GloCfg.field.EnTXWriteBackDDONE =1; - RTMP_IO_WRITE32(pAd, WPDMA_GLO_CFG, GloCfg.word); - - // Record HW Beacon offset - pAd->BeaconOffset[0] = HW_BEACON_BASE0; - pAd->BeaconOffset[1] = HW_BEACON_BASE1; - pAd->BeaconOffset[2] = HW_BEACON_BASE2; - pAd->BeaconOffset[3] = HW_BEACON_BASE3; - pAd->BeaconOffset[4] = HW_BEACON_BASE4; - pAd->BeaconOffset[5] = HW_BEACON_BASE5; - pAd->BeaconOffset[6] = HW_BEACON_BASE6; - pAd->BeaconOffset[7] = HW_BEACON_BASE7; - - // - // write all shared Ring's base address into ASIC - // - - // asic simulation sequence put this ahead before loading firmware. - // pbf hardware reset - - // Initialze ASIC for TX & Rx operation - if (NICInitializeAsic(pAd , bHardReset) != NDIS_STATUS_SUCCESS) - { - if (j++ == 0) - { - NICLoadFirmware(pAd); - goto retry; - } - return NDIS_STATUS_FAILURE; - } - - - - - // WMM parameter - csr0.word = 0; - RTMP_IO_WRITE32(pAd, WMM_TXOP0_CFG, csr0.word); - if (pAd->CommonCfg.PhyMode == PHY_11B) - { - csr0.field.Ac0Txop = 192; // AC_VI: 192*32us ~= 6ms - csr0.field.Ac1Txop = 96; // AC_VO: 96*32us ~= 3ms - } - else - { - csr0.field.Ac0Txop = 96; // AC_VI: 96*32us ~= 3ms - csr0.field.Ac1Txop = 48; // AC_VO: 48*32us ~= 1.5ms - } - RTMP_IO_WRITE32(pAd, WMM_TXOP1_CFG, csr0.word); - - - - - // reset action - // Load firmware - // Status = NICLoadFirmware(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAdapter\n")); - return Status; -} - -/* - ======================================================================== - - Routine Description: - Initialize ASIC - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -NDIS_STATUS NICInitializeAsic( - IN PRTMP_ADAPTER pAd, - IN BOOLEAN bHardReset) -{ - ULONG Index = 0; - UCHAR R0 = 0xff; - UINT32 MacCsr12 = 0, Counter = 0; -#ifdef RT2870 - UINT32 MacCsr0 = 0; - NTSTATUS Status; - UCHAR Value = 0xff; -#endif // RT2870 // -#ifdef RT30xx - UINT32 eFuseCtrl; -#endif // RT30xx // - USHORT KeyIdx; - INT i,apidx; - - DBGPRINT(RT_DEBUG_TRACE, ("--> NICInitializeAsic\n")); - - -#ifdef RT2870 - // - // Make sure MAC gets ready after NICLoadFirmware(). - // - Index = 0; - - //To avoid hang-on issue when interface up in kernel 2.4, - //we use a local variable "MacCsr0" instead of using "pAd->MACVersion" directly. - do - { - RTMP_IO_READ32(pAd, MAC_CSR0, &MacCsr0); - - if ((MacCsr0 != 0x00) && (MacCsr0 != 0xFFFFFFFF)) - break; - - RTMPusecDelay(10); - } while (Index++ < 100); - - pAd->MACVersion = MacCsr0; - DBGPRINT(RT_DEBUG_TRACE, ("MAC_CSR0 [ Ver:Rev=0x%08x]\n", pAd->MACVersion)); - // turn on bit13 (set to zero) after rt2860D. This is to solve high-current issue. - RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacCsr12); - MacCsr12 &= (~0x2000); - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, MacCsr12); - - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x3); - RTMP_IO_WRITE32(pAd, USB_DMA_CFG, 0x0); - Status = RTUSBVenderReset(pAd); - - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); - - // Initialize MAC register to default value - for(Index=0; Index<NUM_MAC_REG_PARMS; Index++) - { -#ifdef RT3070 - if ((MACRegTable[Index].Register == TX_SW_CFG0) && (IS_RT3070(pAd) || IS_RT3071(pAd))) - { - MACRegTable[Index].Value = 0x00000400; - } -#endif // RT3070 // - RTMP_IO_WRITE32(pAd, (USHORT)MACRegTable[Index].Register, MACRegTable[Index].Value); - } - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++) - { - RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value); - } - } -#endif // CONFIG_STA_SUPPORT // -#endif // RT2870 // - -#ifdef RT30xx - // Initialize RT3070 serial MAc registers which is different from RT2870 serial - if (IS_RT3090(pAd)) - { - RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); - - // RT3071 version E has fixed this issue - if ((pAd->MACVersion & 0xffff) < 0x0211) - { - if (pAd->NicConfig2.field.DACTestBit == 1) - { - RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically - } - else - { - RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0F); // To fix throughput drop drastically - } - } - else - { - RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x0); - } - } - else if (IS_RT3070(pAd)) - { - RTMP_IO_WRITE32(pAd, TX_SW_CFG1, 0); - RTMP_IO_WRITE32(pAd, TX_SW_CFG2, 0x1F); // To fix throughput drop drastically - } -#endif // RT30xx // - - // - // Before program BBP, we need to wait BBP/RF get wake up. - // - Index = 0; - do - { - RTMP_IO_READ32(pAd, MAC_STATUS_CFG, &MacCsr12); - - if ((MacCsr12 & 0x03) == 0) // if BB.RF is stable - break; - - DBGPRINT(RT_DEBUG_TRACE, ("Check MAC_STATUS_CFG = Busy = %x\n", MacCsr12)); - RTMPusecDelay(1000); - } while (Index++ < 100); - - // The commands to firmware should be after these commands, these commands will init firmware - // PCI and USB are not the same because PCI driver needs to wait for PCI bus ready - RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); // initialize BBP R/W access agent - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0); - RTMPusecDelay(1000); - - // Read BBP register, make sure BBP is up and running before write new data - Index = 0; - do - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R0, &R0); - DBGPRINT(RT_DEBUG_TRACE, ("BBP version = %x\n", R0)); - } while ((++Index < 20) && ((R0 == 0xff) || (R0 == 0x00))); - //ASSERT(Index < 20); //this will cause BSOD on Check-build driver - - if ((R0 == 0xff) || (R0 == 0x00)) - return NDIS_STATUS_FAILURE; - - // Initialize BBP register to default value - for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, BBPRegTable[Index].Value); - } - - // for rt2860E and after, init BBP_R84 with 0x19. This is for extension channel overlapping IOT. - // RT3090 should not program BBP R84 to 0x19, otherwise TX will block. - if (((pAd->MACVersion&0xffff) != 0x0101) && (!IS_RT30xx(pAd))) - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R84, 0x19); - -// add by johnli, RF power sequence setup -#ifdef RT30xx - if (IS_RT30xx(pAd)) - { //update for RT3070/71/72/90/91/92. - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R79, 0x13); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R80, 0x05); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R81, 0x33); - } - - if (IS_RT3090(pAd)) - { - UCHAR bbpreg=0; - - // enable DC filter - if ((pAd->MACVersion & 0xffff) >= 0x0211) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R103, 0xc0); - } - - // improve power consumption - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R138, &bbpreg); - if (pAd->Antenna.field.TxPath == 1) - { - // turn off tx DAC_1 - bbpreg = (bbpreg | 0x20); - } - - if (pAd->Antenna.field.RxPath == 1) - { - // turn off tx ADC_1 - bbpreg &= (~0x2); - } - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R138, bbpreg); - - // improve power consumption in RT3071 Ver.E - if ((pAd->MACVersion & 0xffff) >= 0x0211) - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R31, &bbpreg); - bbpreg &= (~0x3); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R31, bbpreg); - } - } -#endif // RT30xx // -// end johnli - - if (pAd->MACVersion == 0x28600100) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R73, 0x12); - } - - if (pAd->MACVersion >= RALINK_2880E_VERSION && pAd->MACVersion < RALINK_3070_VERSION) // 3*3 - { - // enlarge MAX_LEN_CFG - UINT32 csr; - RTMP_IO_READ32(pAd, MAX_LEN_CFG, &csr); - csr &= 0xFFF; - csr |= 0x2000; - RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, csr); - } - -#ifdef RT2870 -{ - UCHAR MAC_Value[]={0xff,0xff,0xff,0xff,0xff,0xff,0xff,0,0}; - - //Initialize WCID table - Value = 0xff; - for(Index =0 ;Index < 254;Index++) - { - RTUSBMultiWrite(pAd, (USHORT)(MAC_WCID_BASE + Index * 8), MAC_Value, 8); - } -} -#endif // RT2870 // - - // Add radio off control -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pAd->StaCfg.bRadio == FALSE) - { -// RTMP_IO_WRITE32(pAd, PWR_PIN_CFG, 0x00001818); - RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF); - DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n")); - } - } -#endif // CONFIG_STA_SUPPORT // - - // Clear raw counters - RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter); - RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter); - RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter); - RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter); - RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter); - RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter); - - // ASIC will keep garbage value after boot - // Clear all seared key table when initial - // This routine can be ignored in radio-ON/OFF operation. - if (bHardReset) - { - for (KeyIdx = 0; KeyIdx < 4; KeyIdx++) - { - RTMP_IO_WRITE32(pAd, SHARED_KEY_MODE_BASE + 4*KeyIdx, 0); - } - - // Clear all pairwise key table when initial - for (KeyIdx = 0; KeyIdx < 256; KeyIdx++) - { - RTMP_IO_WRITE32(pAd, MAC_WCID_ATTRIBUTE_BASE + (KeyIdx * HW_WCID_ATTRI_SIZE), 1); - } - } - - // assert HOST ready bit -// RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x0); // 2004-09-14 asked by Mark -// RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x4); - - // It isn't necessary to clear this space when not hard reset. - if (bHardReset == TRUE) - { - // clear all on-chip BEACON frame space - for (apidx = 0; apidx < HW_BEACON_MAX_COUNT; apidx++) - { - for (i = 0; i < HW_BEACON_OFFSET>>2; i+=4) - RTMP_IO_WRITE32(pAd, pAd->BeaconOffset[apidx] + i, 0x00); - } - } -#ifdef RT2870 - AsicDisableSync(pAd); - // Clear raw counters - RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter); - RTMP_IO_READ32(pAd, RX_STA_CNT1, &Counter); - RTMP_IO_READ32(pAd, RX_STA_CNT2, &Counter); - RTMP_IO_READ32(pAd, TX_STA_CNT0, &Counter); - RTMP_IO_READ32(pAd, TX_STA_CNT1, &Counter); - RTMP_IO_READ32(pAd, TX_STA_CNT2, &Counter); - // Default PCI clock cycle per ms is different as default setting, which is based on PCI. - RTMP_IO_READ32(pAd, USB_CYC_CFG, &Counter); - Counter&=0xffffff00; - Counter|=0x000001e; - RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter); -#endif // RT2870 // -#ifdef RT30xx - pAd->bUseEfuse=FALSE; - RTMP_IO_READ32(pAd, EFUSE_CTRL, &eFuseCtrl); - pAd->bUseEfuse = ( (eFuseCtrl & 0x80000000) == 0x80000000) ? 1 : 0; - if(pAd->bUseEfuse) - { - DBGPRINT(RT_DEBUG_TRACE, ("NVM is Efuse\n")); - } - else - { - DBGPRINT(RT_DEBUG_TRACE, ("NVM is EEPROM\n")); - - } -#endif // RT30xx // - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT. - if ((pAd->MACVersion&0xffff) != 0x0101) - RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f); - } -#endif // CONFIG_STA_SUPPORT // - - DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n")); - return NDIS_STATUS_SUCCESS; -} - -/* - ======================================================================== - - Routine Description: - Reset NIC Asics - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - Reset NIC to initial state AS IS system boot up time. - - ======================================================================== -*/ -VOID NICIssueReset( - IN PRTMP_ADAPTER pAd) -{ - UINT32 Value = 0; - DBGPRINT(RT_DEBUG_TRACE, ("--> NICIssueReset\n")); - - // Abort Tx, prevent ASIC from writing to Host memory - //RTMP_IO_WRITE32(pAd, TX_CNTL_CSR, 0x001f0000); - - // Disable Rx, register value supposed will remain after reset - RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value); - Value &= (0xfffffff3); - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, Value); - - // Issue reset and clear from reset state - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x03); // 2004-09-17 change from 0x01 - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x00); - - DBGPRINT(RT_DEBUG_TRACE, ("<-- NICIssueReset\n")); -} - -/* - ======================================================================== - - Routine Description: - Check ASIC registers and find any reason the system might hang - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = DISPATCH_LEVEL - - ======================================================================== -*/ -BOOLEAN NICCheckForHang( - IN PRTMP_ADAPTER pAd) -{ - return (FALSE); -} - -VOID NICUpdateFifoStaCounters( - IN PRTMP_ADAPTER pAd) -{ - TX_STA_FIFO_STRUC StaFifo; - MAC_TABLE_ENTRY *pEntry; - UCHAR i = 0; - UCHAR pid = 0, wcid = 0; - CHAR reTry; - UCHAR succMCS; - -#ifdef RALINK_ATE - /* Nothing to do in ATE mode */ - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - do - { - RTMP_IO_READ32(pAd, TX_STA_FIFO, &StaFifo.word); - - if (StaFifo.field.bValid == 0) - break; - - wcid = (UCHAR)StaFifo.field.wcid; - - - /* ignore NoACK and MGMT frame use 0xFF as WCID */ - if ((StaFifo.field.TxAckRequired == 0) || (wcid >= MAX_LEN_OF_MAC_TABLE)) - { - i++; - continue; - } - - /* PID store Tx MCS Rate */ - pid = (UCHAR)StaFifo.field.PidType; - - pEntry = &pAd->MacTab.Content[wcid]; - - pEntry->DebugFIFOCount++; - -#ifdef DOT11_N_SUPPORT - if (StaFifo.field.TxBF) // 3*3 - pEntry->TxBFCount++; -#endif // DOT11_N_SUPPORT // - -#ifdef UAPSD_AP_SUPPORT - UAPSD_SP_AUE_Handle(pAd, pEntry, StaFifo.field.TxSuccess); -#endif // UAPSD_AP_SUPPORT // - - if (!StaFifo.field.TxSuccess) - { - pEntry->FIFOCount++; - pEntry->OneSecTxFailCount++; - - if (pEntry->FIFOCount >= 1) - { - DBGPRINT(RT_DEBUG_TRACE, ("#")); -#ifdef DOT11_N_SUPPORT - pEntry->NoBADataCountDown = 64; -#endif // DOT11_N_SUPPORT // - - if(pEntry->PsMode == PWR_ACTIVE) - { -#ifdef DOT11_N_SUPPORT - int tid; - for (tid=0; tid<NUM_OF_TID; tid++) - { - BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, FALSE); - } -#endif // DOT11_N_SUPPORT // - - // Update the continuous transmission counter except PS mode - pEntry->ContinueTxFailCnt++; - } - else - { - // Clear the FIFOCount when sta in Power Save mode. Basically we assume - // this tx error happened due to sta just go to sleep. - pEntry->FIFOCount = 0; - pEntry->ContinueTxFailCnt = 0; - } - //pEntry->FIFOCount = 0; - } - //pEntry->bSendBAR = TRUE; - } - else - { -#ifdef DOT11_N_SUPPORT - if ((pEntry->PsMode != PWR_SAVE) && (pEntry->NoBADataCountDown > 0)) - { - pEntry->NoBADataCountDown--; - if (pEntry->NoBADataCountDown==0) - { - DBGPRINT(RT_DEBUG_TRACE, ("@\n")); - } - } -#endif // DOT11_N_SUPPORT // - pEntry->FIFOCount = 0; - pEntry->OneSecTxNoRetryOkCount++; - // update NoDataIdleCount when sucessful send packet to STA. - pEntry->NoDataIdleCount = 0; - pEntry->ContinueTxFailCnt = 0; - } - - succMCS = StaFifo.field.SuccessRate & 0x7F; - - reTry = pid - succMCS; - - if (StaFifo.field.TxSuccess) - { - pEntry->TXMCSExpected[pid]++; - if (pid == succMCS) - { - pEntry->TXMCSSuccessful[pid]++; - } - else - { - pEntry->TXMCSAutoFallBack[pid][succMCS]++; - } - } - else - { - pEntry->TXMCSFailed[pid]++; - } - - if (reTry > 0) - { - if ((pid >= 12) && succMCS <=7) - { - reTry -= 4; - } - pEntry->OneSecTxRetryOkCount += reTry; - } - - i++; - // ASIC store 16 stack - } while ( i < (2*TX_RING_SIZE) ); - -} - -/* - ======================================================================== - - Routine Description: - Read statistical counters from hardware registers and record them - in software variables for later on query - - Arguments: - pAd Pointer to our adapter - - Return Value: - None - - IRQL = DISPATCH_LEVEL - - ======================================================================== -*/ -VOID NICUpdateRawCounters( - IN PRTMP_ADAPTER pAd) -{ - UINT32 OldValue;//, Value2; - //ULONG PageSum, OneSecTransmitCount; - //ULONG TxErrorRatio, Retry, Fail; - RX_STA_CNT0_STRUC RxStaCnt0; - RX_STA_CNT1_STRUC RxStaCnt1; - RX_STA_CNT2_STRUC RxStaCnt2; - TX_STA_CNT0_STRUC TxStaCnt0; - TX_STA_CNT1_STRUC StaTx1; - TX_STA_CNT2_STRUC StaTx2; - TX_AGG_CNT_STRUC TxAggCnt; - TX_AGG_CNT0_STRUC TxAggCnt0; - TX_AGG_CNT1_STRUC TxAggCnt1; - TX_AGG_CNT2_STRUC TxAggCnt2; - TX_AGG_CNT3_STRUC TxAggCnt3; - TX_AGG_CNT4_STRUC TxAggCnt4; - TX_AGG_CNT5_STRUC TxAggCnt5; - TX_AGG_CNT6_STRUC TxAggCnt6; - TX_AGG_CNT7_STRUC TxAggCnt7; - - RTMP_IO_READ32(pAd, RX_STA_CNT0, &RxStaCnt0.word); - RTMP_IO_READ32(pAd, RX_STA_CNT2, &RxStaCnt2.word); - - { - RTMP_IO_READ32(pAd, RX_STA_CNT1, &RxStaCnt1.word); - // Update RX PLCP error counter - pAd->PrivateInfo.PhyRxErrCnt += RxStaCnt1.field.PlcpErr; - // Update False CCA counter - pAd->RalinkCounters.OneSecFalseCCACnt += RxStaCnt1.field.FalseCca; - } - - // Update FCS counters - OldValue= pAd->WlanCounters.FCSErrorCount.u.LowPart; - pAd->WlanCounters.FCSErrorCount.u.LowPart += (RxStaCnt0.field.CrcErr); // >> 7); - if (pAd->WlanCounters.FCSErrorCount.u.LowPart < OldValue) - pAd->WlanCounters.FCSErrorCount.u.HighPart++; - - // Add FCS error count to private counters - pAd->RalinkCounters.OneSecRxFcsErrCnt += RxStaCnt0.field.CrcErr; - OldValue = pAd->RalinkCounters.RealFcsErrCount.u.LowPart; - pAd->RalinkCounters.RealFcsErrCount.u.LowPart += RxStaCnt0.field.CrcErr; - if (pAd->RalinkCounters.RealFcsErrCount.u.LowPart < OldValue) - pAd->RalinkCounters.RealFcsErrCount.u.HighPart++; - - // Update Duplicate Rcv check - pAd->RalinkCounters.DuplicateRcv += RxStaCnt2.field.RxDupliCount; - pAd->WlanCounters.FrameDuplicateCount.u.LowPart += RxStaCnt2.field.RxDupliCount; - // Update RX Overflow counter - pAd->Counters8023.RxNoBuffer += (RxStaCnt2.field.RxFifoOverflowCount); - - //pAd->RalinkCounters.RxCount = 0; -#ifdef RT2870 - if (pAd->RalinkCounters.RxCount != pAd->watchDogRxCnt) - { - pAd->watchDogRxCnt = pAd->RalinkCounters.RxCount; - pAd->watchDogRxOverFlowCnt = 0; - } - else - { - if (RxStaCnt2.field.RxFifoOverflowCount) - pAd->watchDogRxOverFlowCnt++; - else - pAd->watchDogRxOverFlowCnt = 0; - } -#endif // RT2870 // - - - //if (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) || - // (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED) && (pAd->MacTab.Size != 1))) - if (!pAd->bUpdateBcnCntDone) - { - // Update BEACON sent count - RTMP_IO_READ32(pAd, TX_STA_CNT0, &TxStaCnt0.word); - RTMP_IO_READ32(pAd, TX_STA_CNT1, &StaTx1.word); - RTMP_IO_READ32(pAd, TX_STA_CNT2, &StaTx2.word); - pAd->RalinkCounters.OneSecBeaconSentCnt += TxStaCnt0.field.TxBeaconCount; - pAd->RalinkCounters.OneSecTxRetryOkCount += StaTx1.field.TxRetransmit; - pAd->RalinkCounters.OneSecTxNoRetryOkCount += StaTx1.field.TxSuccess; - pAd->RalinkCounters.OneSecTxFailCount += TxStaCnt0.field.TxFailCount; - pAd->WlanCounters.TransmittedFragmentCount.u.LowPart += StaTx1.field.TxSuccess; - pAd->WlanCounters.RetryCount.u.LowPart += StaTx1.field.TxRetransmit; - pAd->WlanCounters.FailedCount.u.LowPart += TxStaCnt0.field.TxFailCount; - } - - //if (pAd->bStaFifoTest == TRUE) - { - RTMP_IO_READ32(pAd, TX_AGG_CNT, &TxAggCnt.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT0, &TxAggCnt0.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT1, &TxAggCnt1.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT2, &TxAggCnt2.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT3, &TxAggCnt3.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT4, &TxAggCnt4.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT5, &TxAggCnt5.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT6, &TxAggCnt6.word); - RTMP_IO_READ32(pAd, TX_AGG_CNT7, &TxAggCnt7.word); - pAd->RalinkCounters.TxAggCount += TxAggCnt.field.AggTxCount; - pAd->RalinkCounters.TxNonAggCount += TxAggCnt.field.NonAggTxCount; - pAd->RalinkCounters.TxAgg1MPDUCount += TxAggCnt0.field.AggSize1Count; - pAd->RalinkCounters.TxAgg2MPDUCount += TxAggCnt0.field.AggSize2Count; - - pAd->RalinkCounters.TxAgg3MPDUCount += TxAggCnt1.field.AggSize3Count; - pAd->RalinkCounters.TxAgg4MPDUCount += TxAggCnt1.field.AggSize4Count; - pAd->RalinkCounters.TxAgg5MPDUCount += TxAggCnt2.field.AggSize5Count; - pAd->RalinkCounters.TxAgg6MPDUCount += TxAggCnt2.field.AggSize6Count; - - pAd->RalinkCounters.TxAgg7MPDUCount += TxAggCnt3.field.AggSize7Count; - pAd->RalinkCounters.TxAgg8MPDUCount += TxAggCnt3.field.AggSize8Count; - pAd->RalinkCounters.TxAgg9MPDUCount += TxAggCnt4.field.AggSize9Count; - pAd->RalinkCounters.TxAgg10MPDUCount += TxAggCnt4.field.AggSize10Count; - - pAd->RalinkCounters.TxAgg11MPDUCount += TxAggCnt5.field.AggSize11Count; - pAd->RalinkCounters.TxAgg12MPDUCount += TxAggCnt5.field.AggSize12Count; - pAd->RalinkCounters.TxAgg13MPDUCount += TxAggCnt6.field.AggSize13Count; - pAd->RalinkCounters.TxAgg14MPDUCount += TxAggCnt6.field.AggSize14Count; - - pAd->RalinkCounters.TxAgg15MPDUCount += TxAggCnt7.field.AggSize15Count; - pAd->RalinkCounters.TxAgg16MPDUCount += TxAggCnt7.field.AggSize16Count; - - // Calculate the transmitted A-MPDU count - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += TxAggCnt0.field.AggSize1Count; - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt0.field.AggSize2Count / 2); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt1.field.AggSize3Count / 3); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt1.field.AggSize4Count / 4); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt2.field.AggSize5Count / 5); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt2.field.AggSize6Count / 6); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt3.field.AggSize7Count / 7); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt3.field.AggSize8Count / 8); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt4.field.AggSize9Count / 9); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt4.field.AggSize10Count / 10); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt5.field.AggSize11Count / 11); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt5.field.AggSize12Count / 12); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt6.field.AggSize13Count / 13); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt6.field.AggSize14Count / 14); - - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt7.field.AggSize15Count / 15); - pAd->RalinkCounters.TransmittedAMPDUCount.u.LowPart += (TxAggCnt7.field.AggSize16Count / 16); - } - -#ifdef DBG_DIAGNOSE - { - RtmpDiagStruct *pDiag; - COUNTER_RALINK *pRalinkCounters; - UCHAR ArrayCurIdx, i; - - pDiag = &pAd->DiagStruct; - pRalinkCounters = &pAd->RalinkCounters; - ArrayCurIdx = pDiag->ArrayCurIdx; - - if (pDiag->inited == 0) - { - NdisZeroMemory(pDiag, sizeof(struct _RtmpDiagStrcut_)); - pDiag->ArrayStartIdx = pDiag->ArrayCurIdx = 0; - pDiag->inited = 1; - } - else - { - // Tx - pDiag->TxFailCnt[ArrayCurIdx] = TxStaCnt0.field.TxFailCount; - pDiag->TxAggCnt[ArrayCurIdx] = TxAggCnt.field.AggTxCount; - pDiag->TxNonAggCnt[ArrayCurIdx] = TxAggCnt.field.NonAggTxCount; - pDiag->TxAMPDUCnt[ArrayCurIdx][0] = TxAggCnt0.field.AggSize1Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][1] = TxAggCnt0.field.AggSize2Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][2] = TxAggCnt1.field.AggSize3Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][3] = TxAggCnt1.field.AggSize4Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][4] = TxAggCnt2.field.AggSize5Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][5] = TxAggCnt2.field.AggSize6Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][6] = TxAggCnt3.field.AggSize7Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][7] = TxAggCnt3.field.AggSize8Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][8] = TxAggCnt4.field.AggSize9Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][9] = TxAggCnt4.field.AggSize10Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][10] = TxAggCnt5.field.AggSize11Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][11] = TxAggCnt5.field.AggSize12Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][12] = TxAggCnt6.field.AggSize13Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][13] = TxAggCnt6.field.AggSize14Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][14] = TxAggCnt7.field.AggSize15Count; - pDiag->TxAMPDUCnt[ArrayCurIdx][15] = TxAggCnt7.field.AggSize16Count; - - pDiag->RxCrcErrCnt[ArrayCurIdx] = RxStaCnt0.field.CrcErr; - - INC_RING_INDEX(pDiag->ArrayCurIdx, DIAGNOSE_TIME); - ArrayCurIdx = pDiag->ArrayCurIdx; - for (i =0; i < 9; i++) - { - pDiag->TxDescCnt[ArrayCurIdx][i]= 0; - pDiag->TxSWQueCnt[ArrayCurIdx][i] =0; - pDiag->TxMcsCnt[ArrayCurIdx][i] = 0; - pDiag->RxMcsCnt[ArrayCurIdx][i] = 0; - } - pDiag->TxDataCnt[ArrayCurIdx] = 0; - pDiag->TxFailCnt[ArrayCurIdx] = 0; - pDiag->RxDataCnt[ArrayCurIdx] = 0; - pDiag->RxCrcErrCnt[ArrayCurIdx] = 0; -// for (i = 9; i < 16; i++) - for (i = 9; i < 24; i++) // 3*3 - { - pDiag->TxDescCnt[ArrayCurIdx][i] = 0; - pDiag->TxMcsCnt[ArrayCurIdx][i] = 0; - pDiag->RxMcsCnt[ArrayCurIdx][i] = 0; -} - - if (pDiag->ArrayCurIdx == pDiag->ArrayStartIdx) - INC_RING_INDEX(pDiag->ArrayStartIdx, DIAGNOSE_TIME); - } - - } -#endif // DBG_DIAGNOSE // - - -} - - -/* - ======================================================================== - - Routine Description: - Reset NIC from error - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - Reset NIC from error state - - ======================================================================== -*/ -VOID NICResetFromError( - IN PRTMP_ADAPTER pAd) -{ - // Reset BBP (according to alex, reset ASIC will force reset BBP - // Therefore, skip the reset BBP - // RTMP_IO_WRITE32(pAd, MAC_CSR1, 0x2); - - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x1); - // Remove ASIC from reset state - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0x0); - - NICInitializeAdapter(pAd, FALSE); - NICInitAsicFromEEPROM(pAd); - - // Switch to current channel, since during reset process, the connection should remains on. - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); -} - -/* - ======================================================================== - - Routine Description: - erase 8051 firmware image in MAC ASIC - - Arguments: - Adapter Pointer to our adapter - - IRQL = PASSIVE_LEVEL - - ======================================================================== -*/ -VOID NICEraseFirmware( - IN PRTMP_ADAPTER pAd) -{ - ULONG i; - - for(i=0; i<MAX_FIRMWARE_IMAGE_SIZE; i+=4) - RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, 0); - -}/* End of NICEraseFirmware */ - -/* - ======================================================================== - - Routine Description: - Load 8051 firmware RT2561.BIN file into MAC ASIC - - Arguments: - Adapter Pointer to our adapter - - Return Value: - NDIS_STATUS_SUCCESS firmware image load ok - NDIS_STATUS_FAILURE image not found - - IRQL = PASSIVE_LEVEL - - ======================================================================== -*/ -NDIS_STATUS NICLoadFirmware( - IN PRTMP_ADAPTER pAd) -{ -#ifdef BIN_IN_FILE -#define NICLF_DEFAULT_USE() \ - flg_default_firm_use = TRUE; \ - printk("%s - Use default firmware!\n", __FUNCTION__); - - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - PUCHAR src; - struct file *srcf; - INT retval, orgfsuid, orgfsgid, i; - mm_segment_t orgfs; - PUCHAR pFirmwareImage; - UINT FileLength = 0; - UINT32 MacReg; - ULONG Index; - ULONG firm; - BOOLEAN flg_default_firm_use = FALSE; - - - DBGPRINT(RT_DEBUG_TRACE, ("===> %s\n", __FUNCTION__)); - - /* init */ - pFirmwareImage = NULL; - src = RTMP_FIRMWARE_FILE_NAME; - - /* save uid and gid used for filesystem access. - set user and group to 0 (root) */ - orgfsuid = current->fsuid; - orgfsgid = current->fsgid; - current->fsuid = current->fsgid = 0; - orgfs = get_fs(); - set_fs(KERNEL_DS); - - pAd->FirmwareVersion = (FIRMWARE_MAJOR_VERSION << 8) + \ - FIRMWARE_MINOR_VERSION; - - - /* allocate firmware buffer */ - pFirmwareImage = kmalloc(MAX_FIRMWARE_IMAGE_SIZE, MEM_ALLOC_FLAG); - if (pFirmwareImage == NULL) - { - /* allocate fail, use default firmware array in firmware.h */ - printk("%s - Allocate memory fail!\n", __FUNCTION__); - NICLF_DEFAULT_USE(); - } - else - { - /* allocate ok! zero the firmware buffer */ - memset(pFirmwareImage, 0x00, MAX_FIRMWARE_IMAGE_SIZE); - } /* End of if */ - - - /* if ok, read firmware file from *.bin file */ - if (flg_default_firm_use == FALSE) - { - do - { - /* open the bin file */ - srcf = filp_open(src, O_RDONLY, 0); - - if (IS_ERR(srcf)) - { - printk("%s - Error %ld opening %s\n", - __FUNCTION__, -PTR_ERR(srcf), src); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - - /* the object must have a read method */ - if ((srcf->f_op == NULL) || (srcf->f_op->read == NULL)) - { - printk("%s - %s does not have a write method\n", __FUNCTION__, src); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - - /* read the firmware from the file *.bin */ - FileLength = srcf->f_op->read(srcf, - pFirmwareImage, - MAX_FIRMWARE_IMAGE_SIZE, - &srcf->f_pos); - - if (FileLength != MAX_FIRMWARE_IMAGE_SIZE) - { - printk("%s: error file length (=%d) in RT2860AP.BIN\n", - __FUNCTION__, FileLength); - NICLF_DEFAULT_USE(); - break; - } - else - { - PUCHAR ptr = pFirmwareImage; - USHORT crc = 0xffff; - - - /* calculate firmware CRC */ - for(i=0; i<(MAX_FIRMWARE_IMAGE_SIZE-2); i++, ptr++) - crc = ByteCRC16(BitReverse(*ptr), crc); - /* End of for */ - - if ((pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2] != \ - (UCHAR)BitReverse((UCHAR)(crc>>8))) || - (pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1] != \ - (UCHAR)BitReverse((UCHAR)crc))) - { - /* CRC fail */ - printk("%s: CRC = 0x%02x 0x%02x " - "error, should be 0x%02x 0x%02x\n", - __FUNCTION__, - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-2], - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-1], - (UCHAR)(crc>>8), (UCHAR)(crc)); - NICLF_DEFAULT_USE(); - break; - } - else - { - /* firmware is ok */ - pAd->FirmwareVersion = \ - (pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4] << 8) + - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3]; - - /* check if firmware version of the file is too old */ - if ((pAd->FirmwareVersion) < \ - ((FIRMWARE_MAJOR_VERSION << 8) + - FIRMWARE_MINOR_VERSION)) - { - printk("%s: firmware version too old!\n", __FUNCTION__); - NICLF_DEFAULT_USE(); - break; - } /* End of if */ - } /* End of if */ - - DBGPRINT(RT_DEBUG_TRACE, - ("NICLoadFirmware: CRC ok, ver=%d.%d\n", - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-4], - pFirmwareImage[MAX_FIRMWARE_IMAGE_SIZE-3])); - } /* End of if (FileLength == MAX_FIRMWARE_IMAGE_SIZE) */ - break; - } while(TRUE); - - /* close firmware file */ - if (IS_ERR(srcf)) - ; - else - { - retval = filp_close(srcf, NULL); - if (retval) - { - DBGPRINT(RT_DEBUG_ERROR, - ("--> Error %d closing %s\n", -retval, src)); - } /* End of if */ - } /* End of if */ - } /* End of if */ - - - /* write firmware to ASIC */ - if (flg_default_firm_use == TRUE) - { - /* use default fimeware, free allocated buffer */ - if (pFirmwareImage != NULL) - kfree(pFirmwareImage); - /* End of if */ - - /* use default *.bin array */ - pFirmwareImage = FirmwareImage; - FileLength = sizeof(FirmwareImage); - } /* End of if */ - - /* enable Host program ram write selection */ - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x10000); - - for(i=0; i<FileLength; i+=4) - { - firm = pFirmwareImage[i] + - (pFirmwareImage[i+3] << 24) + - (pFirmwareImage[i+2] << 16) + - (pFirmwareImage[i+1] << 8); - - RTMP_IO_WRITE32(pAd, FIRMWARE_IMAGE_BASE + i, firm); - } /* End of for */ - - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00000); - RTMP_IO_WRITE32(pAd, PBF_SYS_CTRL, 0x00001); - - /* initialize BBP R/W access agent */ - RTMP_IO_WRITE32(pAd, H2M_BBP_AGENT, 0); - RTMP_IO_WRITE32(pAd, H2M_MAILBOX_CSR, 0); - - if (flg_default_firm_use == FALSE) - { - /* use file firmware, free allocated buffer */ - if (pFirmwareImage != NULL) - kfree(pFirmwareImage); - /* End of if */ - } /* End of if */ - - set_fs(orgfs); - current->fsuid = orgfsuid; - current->fsgid = orgfsgid; -#else - - NDIS_STATUS Status = NDIS_STATUS_SUCCESS; - PUCHAR pFirmwareImage; - ULONG FileLength, Index; - //ULONG firm; - UINT32 MacReg = 0; - UINT32 Version = (pAd->MACVersion >> 16); - - pFirmwareImage = FirmwareImage; - FileLength = sizeof(FirmwareImage); - - // New 8k byte firmware size for RT3071/RT3072 - //printk("Usb Chip\n"); - if (FIRMWAREIMAGE_LENGTH == FIRMWAREIMAGE_MAX_LENGTH) - //The firmware image consists of two parts. One is the origianl and the other is the new. - //Use Second Part - { -#ifdef RT2870 - if ((Version != 0x2860) && (Version != 0x2872) && (Version != 0x3070)) - { // Use Firmware V2. - //printk("KH:Use New Version,part2\n"); - pFirmwareImage = (PUCHAR)&FirmwareImage[FIRMWAREIMAGEV1_LENGTH]; - FileLength = FIRMWAREIMAGEV2_LENGTH; - } - else - { - //printk("KH:Use New Version,part1\n"); - pFirmwareImage = FirmwareImage; - FileLength = FIRMWAREIMAGEV1_LENGTH; - } -#endif // RT2870 // - } - else - { - DBGPRINT(RT_DEBUG_ERROR, ("KH: bin file should be 8KB.\n")); - Status = NDIS_STATUS_FAILURE; - } - - RT28XX_WRITE_FIRMWARE(pAd, pFirmwareImage, FileLength); - -#endif - - /* check if MCU is ready */ - Index = 0; - do - { - RTMP_IO_READ32(pAd, PBF_SYS_CTRL, &MacReg); - - if (MacReg & 0x80) - break; - - RTMPusecDelay(1000); - } while (Index++ < 1000); - - if (Index >= 1000) - { - Status = NDIS_STATUS_FAILURE; - DBGPRINT(RT_DEBUG_ERROR, ("NICLoadFirmware: MCU is not ready\n\n\n")); - } /* End of if */ - - DBGPRINT(RT_DEBUG_TRACE, - ("<=== %s (status=%d)\n", __FUNCTION__, Status)); - return Status; -} /* End of NICLoadFirmware */ - - -/* - ======================================================================== - - Routine Description: - Load Tx rate switching parameters - - Arguments: - Adapter Pointer to our adapter - - Return Value: - NDIS_STATUS_SUCCESS firmware image load ok - NDIS_STATUS_FAILURE image not found - - IRQL = PASSIVE_LEVEL - - Rate Table Format: - 1. (B0: Valid Item number) (B1:Initial item from zero) - 2. Item Number(Dec) Mode(Hex) Current MCS(Dec) TrainUp(Dec) TrainDown(Dec) - - ======================================================================== -*/ -NDIS_STATUS NICLoadRateSwitchingParams( - IN PRTMP_ADAPTER pAd) -{ - return NDIS_STATUS_SUCCESS; -} - -/* - ======================================================================== - - Routine Description: - if pSrc1 all zero with length Length, return 0. - If not all zero, return 1 - - Arguments: - pSrc1 - - Return Value: - 1: not all zero - 0: all zero - - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -ULONG RTMPNotAllZero( - IN PVOID pSrc1, - IN ULONG Length) -{ - PUCHAR pMem1; - ULONG Index = 0; - - pMem1 = (PUCHAR) pSrc1; - - for (Index = 0; Index < Length; Index++) - { - if (pMem1[Index] != 0x0) - { - break; - } - } - - if (Index == Length) - { - return (0); - } - else - { - return (1); - } -} - -/* - ======================================================================== - - Routine Description: - Compare two memory block - - Arguments: - pSrc1 Pointer to first memory address - pSrc2 Pointer to second memory address - - Return Value: - 0: memory is equal - 1: pSrc1 memory is larger - 2: pSrc2 memory is larger - - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -ULONG RTMPCompareMemory( - IN PVOID pSrc1, - IN PVOID pSrc2, - IN ULONG Length) -{ - PUCHAR pMem1; - PUCHAR pMem2; - ULONG Index = 0; - - pMem1 = (PUCHAR) pSrc1; - pMem2 = (PUCHAR) pSrc2; - - for (Index = 0; Index < Length; Index++) - { - if (pMem1[Index] > pMem2[Index]) - return (1); - else if (pMem1[Index] < pMem2[Index]) - return (2); - } - - // Equal - return (0); -} - -/* - ======================================================================== - - Routine Description: - Zero out memory block - - Arguments: - pSrc1 Pointer to memory address - Length Size - - Return Value: - None - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -VOID RTMPZeroMemory( - IN PVOID pSrc, - IN ULONG Length) -{ - PUCHAR pMem; - ULONG Index = 0; - - pMem = (PUCHAR) pSrc; - - for (Index = 0; Index < Length; Index++) - { - pMem[Index] = 0x00; - } -} - -VOID RTMPFillMemory( - IN PVOID pSrc, - IN ULONG Length, - IN UCHAR Fill) -{ - PUCHAR pMem; - ULONG Index = 0; - - pMem = (PUCHAR) pSrc; - - for (Index = 0; Index < Length; Index++) - { - pMem[Index] = Fill; - } -} - -/* - ======================================================================== - - Routine Description: - Copy data from memory block 1 to memory block 2 - - Arguments: - pDest Pointer to destination memory address - pSrc Pointer to source memory address - Length Copy size - - Return Value: - None - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -VOID RTMPMoveMemory( - OUT PVOID pDest, - IN PVOID pSrc, - IN ULONG Length) -{ - PUCHAR pMem1; - PUCHAR pMem2; - UINT Index; - - ASSERT((Length==0) || (pDest && pSrc)); - - pMem1 = (PUCHAR) pDest; - pMem2 = (PUCHAR) pSrc; - - for (Index = 0; Index < Length; Index++) - { - pMem1[Index] = pMem2[Index]; - } -} - -/* - ======================================================================== - - Routine Description: - Initialize port configuration structure - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - - ======================================================================== -*/ -VOID UserCfgInit( - IN PRTMP_ADAPTER pAd) -{ -// EDCA_PARM DefaultEdcaParm; - UINT key_index, bss_index; - - DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit\n")); - - // - // part I. intialize common configuration - // -#ifdef RT2870 - pAd->BulkOutReq = 0; - - pAd->BulkOutComplete = 0; - pAd->BulkOutCompleteOther = 0; - pAd->BulkOutCompleteCancel = 0; - pAd->BulkInReq = 0; - pAd->BulkInComplete = 0; - pAd->BulkInCompleteFail = 0; - - //pAd->QuickTimerP = 100; - //pAd->TurnAggrBulkInCount = 0; - pAd->bUsbTxBulkAggre = 0; - - // init as unsed value to ensure driver will set to MCU once. - pAd->LedIndicatorStregth = 0xFF; - - pAd->CommonCfg.MaxPktOneTxBulk = 2; - pAd->CommonCfg.TxBulkFactor = 1; - pAd->CommonCfg.RxBulkFactor =1; - - pAd->CommonCfg.TxPower = 100; //mW - - NdisZeroMemory(&pAd->CommonCfg.IOTestParm, sizeof(pAd->CommonCfg.IOTestParm)); -#endif // RT2870 // - - for(key_index=0; key_index<SHARE_KEY_NUM; key_index++) - { - for(bss_index = 0; bss_index < MAX_MBSSID_NUM; bss_index++) - { - pAd->SharedKey[bss_index][key_index].KeyLen = 0; - pAd->SharedKey[bss_index][key_index].CipherAlg = CIPHER_NONE; - } /* End of for */ - } /* End of for */ - - pAd->EepromAccess = FALSE; - - pAd->Antenna.word = 0; - pAd->CommonCfg.BBPCurrentBW = BW_20; - - pAd->LedCntl.word = 0; - - pAd->bAutoTxAgcA = FALSE; // Default is OFF - pAd->bAutoTxAgcG = FALSE; // Default is OFF - pAd->RfIcType = RFIC_2820; - - // Init timer for reset complete event - pAd->CommonCfg.CentralChannel = 1; - pAd->bForcePrintTX = FALSE; - pAd->bForcePrintRX = FALSE; - pAd->bStaFifoTest = FALSE; - pAd->bProtectionTest = FALSE; - pAd->bHCCATest = FALSE; - pAd->bGenOneHCCA = FALSE; - pAd->CommonCfg.Dsifs = 10; // in units of usec - pAd->CommonCfg.TxPower = 100; //mW - pAd->CommonCfg.TxPowerPercentage = 0xffffffff; // AUTO - pAd->CommonCfg.TxPowerDefault = 0xffffffff; // AUTO - pAd->CommonCfg.TxPreamble = Rt802_11PreambleAuto; // use Long preamble on TX by defaut - pAd->CommonCfg.bUseZeroToDisableFragment = FALSE; - pAd->CommonCfg.RtsThreshold = 2347; - pAd->CommonCfg.FragmentThreshold = 2346; - pAd->CommonCfg.UseBGProtection = 0; // 0: AUTO - pAd->CommonCfg.bEnableTxBurst = TRUE; //0; - pAd->CommonCfg.PhyMode = 0xff; // unknown - pAd->CommonCfg.BandState = UNKNOWN_BAND; - pAd->CommonCfg.RadarDetect.CSPeriod = 10; - pAd->CommonCfg.RadarDetect.CSCount = 0; - pAd->CommonCfg.RadarDetect.RDMode = RD_NORMAL_MODE; - pAd->CommonCfg.RadarDetect.ChMovingTime = 65; - pAd->CommonCfg.RadarDetect.LongPulseRadarTh = 3; - pAd->CommonCfg.bAPSDCapable = FALSE; - pAd->CommonCfg.bNeedSendTriggerFrame = FALSE; - pAd->CommonCfg.TriggerTimerCount = 0; - pAd->CommonCfg.bAPSDForcePowerSave = FALSE; - pAd->CommonCfg.bCountryFlag = FALSE; - pAd->CommonCfg.TxStream = 0; - pAd->CommonCfg.RxStream = 0; - - NdisZeroMemory(&pAd->BeaconTxWI, sizeof(pAd->BeaconTxWI)); - -#ifdef DOT11_N_SUPPORT - NdisZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability)); - pAd->HTCEnable = FALSE; - pAd->bBroadComHT = FALSE; - pAd->CommonCfg.bRdg = FALSE; - -#ifdef DOT11N_DRAFT3 - pAd->CommonCfg.Dot11OBssScanPassiveDwell = dot11OBSSScanPassiveDwell; // Unit : TU. 5~1000 - pAd->CommonCfg.Dot11OBssScanActiveDwell = dot11OBSSScanActiveDwell; // Unit : TU. 10~1000 - pAd->CommonCfg.Dot11BssWidthTriggerScanInt = dot11BSSWidthTriggerScanInterval; // Unit : Second - pAd->CommonCfg.Dot11OBssScanPassiveTotalPerChannel = dot11OBSSScanPassiveTotalPerChannel; // Unit : TU. 200~10000 - pAd->CommonCfg.Dot11OBssScanActiveTotalPerChannel = dot11OBSSScanActiveTotalPerChannel; // Unit : TU. 20~10000 - pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor = dot11BSSWidthChannelTransactionDelayFactor; - pAd->CommonCfg.Dot11OBssScanActivityThre = dot11BSSScanActivityThreshold; // Unit : percentage - pAd->CommonCfg.Dot11BssWidthChanTranDelay = (pAd->CommonCfg.Dot11BssWidthTriggerScanInt * pAd->CommonCfg.Dot11BssWidthChanTranDelayFactor); -#endif // DOT11N_DRAFT3 // - - NdisZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo)); - pAd->CommonCfg.BACapability.field.MMPSmode = MMPS_ENABLE; - pAd->CommonCfg.BACapability.field.MpduDensity = 0; - pAd->CommonCfg.BACapability.field.Policy = IMMED_BA; - pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; //32; - pAd->CommonCfg.BACapability.field.TxBAWinLimit = 64; //32; - DBGPRINT(RT_DEBUG_TRACE, ("--> UserCfgInit. BACapability = 0x%x\n", pAd->CommonCfg.BACapability.word)); - - pAd->CommonCfg.BACapability.field.AutoBA = FALSE; - BATableInit(pAd, &pAd->BATable); - - pAd->CommonCfg.bExtChannelSwitchAnnouncement = 1; - pAd->CommonCfg.bHTProtect = 1; - pAd->CommonCfg.bMIMOPSEnable = TRUE; - pAd->CommonCfg.bBADecline = FALSE; - pAd->CommonCfg.bDisableReordering = FALSE; - - pAd->CommonCfg.TxBASize = 7; - - pAd->CommonCfg.REGBACapability.word = pAd->CommonCfg.BACapability.word; -#endif // DOT11_N_SUPPORT // - - //pAd->CommonCfg.HTPhyMode.field.BW = BW_20; - //pAd->CommonCfg.HTPhyMode.field.MCS = MCS_AUTO; - //pAd->CommonCfg.HTPhyMode.field.ShortGI = GI_800; - //pAd->CommonCfg.HTPhyMode.field.STBC = STBC_NONE; - pAd->CommonCfg.TxRate = RATE_6; - - pAd->CommonCfg.MlmeTransmit.field.MCS = MCS_RATE_6; - pAd->CommonCfg.MlmeTransmit.field.BW = BW_20; - pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM; - - pAd->CommonCfg.BeaconPeriod = 100; // in mSec - - // - // part II. intialize STA specific configuration - // -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT); - RX_FILTER_CLEAR_FLAG(pAd, fRX_FILTER_ACCEPT_MULTICAST); - RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_BROADCAST); - RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_ALL_MULTICAST); - - pAd->StaCfg.Psm = PWR_ACTIVE; - - pAd->StaCfg.OrigWepStatus = Ndis802_11EncryptionDisabled; - pAd->StaCfg.PairCipher = Ndis802_11EncryptionDisabled; - pAd->StaCfg.GroupCipher = Ndis802_11EncryptionDisabled; - pAd->StaCfg.bMixCipher = FALSE; - pAd->StaCfg.DefaultKeyId = 0; - - // 802.1x port control - pAd->StaCfg.PrivacyFilter = Ndis802_11PrivFilter8021xWEP; - pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED; - pAd->StaCfg.LastMicErrorTime = 0; - pAd->StaCfg.MicErrCnt = 0; - pAd->StaCfg.bBlockAssoc = FALSE; - pAd->StaCfg.WpaState = SS_NOTUSE; - - pAd->CommonCfg.NdisRadioStateOff = FALSE; // New to support microsoft disable radio with OID command - - pAd->StaCfg.RssiTrigger = 0; - NdisZeroMemory(&pAd->StaCfg.RssiSample, sizeof(RSSI_SAMPLE)); - pAd->StaCfg.RssiTriggerMode = RSSI_TRIGGERED_UPON_BELOW_THRESHOLD; - pAd->StaCfg.AtimWin = 0; - pAd->StaCfg.DefaultListenCount = 3;//default listen count; - pAd->StaCfg.BssType = BSS_INFRA; // BSS_INFRA or BSS_ADHOC or BSS_MONITOR - pAd->StaCfg.bScanReqIsFromWebUI = FALSE; - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_DOZE); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_WAKEUP_NOW); - - pAd->StaCfg.bAutoTxRateSwitch = TRUE; - pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; - } - -#ifdef EXT_BUILD_CHANNEL_LIST - pAd->StaCfg.IEEE80211dClientMode = Rt802_11_D_None; -#endif // EXT_BUILD_CHANNEL_LIST // -#endif // CONFIG_STA_SUPPORT // - - // global variables mXXXX used in MAC protocol state machines - OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_ADHOC_ON); - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON); - - // PHY specification - pAd->CommonCfg.PhyMode = PHY_11BG_MIXED; // default PHY mode - OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED); // CCK use LONG preamble - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - // user desired power mode - pAd->StaCfg.WindowsPowerMode = Ndis802_11PowerModeCAM; - pAd->StaCfg.WindowsBatteryPowerMode = Ndis802_11PowerModeCAM; - pAd->StaCfg.bWindowsACCAMEnable = FALSE; - -#ifdef LEAP_SUPPORT - // CCX v1.0 releated init value - RTMPInitTimer(pAd, &pAd->StaCfg.LeapAuthTimer, GET_TIMER_FUNCTION(LeapAuthTimeout), pAd, FALSE); - pAd->StaCfg.LeapAuthMode = CISCO_AuthModeLEAPNone; - pAd->StaCfg.bCkipOn = FALSE; -#endif // LEAP_SUPPORT // - - RTMPInitTimer(pAd, &pAd->StaCfg.StaQuickResponeForRateUpTimer, GET_TIMER_FUNCTION(StaQuickResponeForRateUpExec), pAd, FALSE); - pAd->StaCfg.StaQuickResponeForRateUpTimerRunning = FALSE; - - // Patch for Ndtest - pAd->StaCfg.ScanCnt = 0; - - // CCX 2.0 control flag init - pAd->StaCfg.CCXEnable = FALSE; - pAd->StaCfg.CCXReqType = MSRN_TYPE_UNUSED; - pAd->StaCfg.CCXQosECWMin = 4; - pAd->StaCfg.CCXQosECWMax = 10; - - pAd->StaCfg.bHwRadio = TRUE; // Default Hardware Radio status is On - pAd->StaCfg.bSwRadio = TRUE; // Default Software Radio status is On - pAd->StaCfg.bRadio = TRUE; // bHwRadio && bSwRadio - pAd->StaCfg.bHardwareRadio = FALSE; // Default is OFF - pAd->StaCfg.bShowHiddenSSID = FALSE; // Default no show - - // Nitro mode control - pAd->StaCfg.bAutoReconnect = TRUE; - - // Save the init time as last scan time, the system should do scan after 2 seconds. - // This patch is for driver wake up from standby mode, system will do scan right away. - pAd->StaCfg.LastScanTime = 0; - NdisZeroMemory(pAd->nickname, IW_ESSID_MAX_SIZE+1); - sprintf(pAd->nickname, "%s", STA_NIC_DEVICE_NAME); - RTMPInitTimer(pAd, &pAd->StaCfg.WpaDisassocAndBlockAssocTimer, GET_TIMER_FUNCTION(WpaDisassocApAndBlockAssoc), pAd, FALSE); -#ifdef WPA_SUPPLICANT_SUPPORT - pAd->StaCfg.IEEE8021X = FALSE; - pAd->StaCfg.IEEE8021x_required_keys = FALSE; - pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_DISABLE; -#ifdef NATIVE_WPA_SUPPLICANT_SUPPORT - pAd->StaCfg.WpaSupplicantUP = WPA_SUPPLICANT_ENABLE; -#endif // NATIVE_WPA_SUPPLICANT_SUPPORT // -#endif // WPA_SUPPLICANT_SUPPORT // - - } -#endif // CONFIG_STA_SUPPORT // - - // Default for extra information is not valid - pAd->ExtraInfo = EXTRA_INFO_CLEAR; - - // Default Config change flag - pAd->bConfigChanged = FALSE; - - // - // part III. AP configurations - // - - - // - // part IV. others - // - // dynamic BBP R66:sensibity tuning to overcome background noise - pAd->BbpTuning.bEnable = TRUE; - pAd->BbpTuning.FalseCcaLowerThreshold = 100; - pAd->BbpTuning.FalseCcaUpperThreshold = 512; - pAd->BbpTuning.R66Delta = 4; - pAd->Mlme.bEnableAutoAntennaCheck = TRUE; - - // - // Also initial R66CurrentValue, RTUSBResumeMsduTransmission might use this value. - // if not initial this value, the default value will be 0. - // - pAd->BbpTuning.R66CurrentValue = 0x38; - - pAd->Bbp94 = BBPR94_DEFAULT; - pAd->BbpForCCK = FALSE; - - // Default is FALSE for test bit 1 - //pAd->bTest1 = FALSE; - - // initialize MAC table and allocate spin lock - NdisZeroMemory(&pAd->MacTab, sizeof(MAC_TABLE)); - InitializeQueueHeader(&pAd->MacTab.McastPsQueue); - NdisAllocateSpinLock(&pAd->MacTabLock); - - //RTMPInitTimer(pAd, &pAd->RECBATimer, RECBATimerTimeout, pAd, TRUE); - //RTMPSetTimer(&pAd->RECBATimer, REORDER_EXEC_INTV); - -#ifdef RALINK_ATE - NdisZeroMemory(&pAd->ate, sizeof(ATE_INFO)); - pAd->ate.Mode = ATE_STOP; - pAd->ate.TxCount = 200;/* to exceed TX_RING_SIZE ... */ - pAd->ate.TxLength = 1024; - pAd->ate.TxWI.ShortGI = 0;// LONG GI : 800 ns - pAd->ate.TxWI.PHYMODE = MODE_CCK; - pAd->ate.TxWI.MCS = 3; - pAd->ate.TxWI.BW = BW_20; - pAd->ate.Channel = 1; - pAd->ate.QID = QID_AC_BE; - pAd->ate.Addr1[0] = 0x00; - pAd->ate.Addr1[1] = 0x11; - pAd->ate.Addr1[2] = 0x22; - pAd->ate.Addr1[3] = 0xAA; - pAd->ate.Addr1[4] = 0xBB; - pAd->ate.Addr1[5] = 0xCC; - NdisMoveMemory(pAd->ate.Addr2, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - NdisMoveMemory(pAd->ate.Addr3, pAd->ate.Addr1, ETH_LENGTH_OF_ADDRESS); - pAd->ate.bRxFer = 0; - pAd->ate.bQATxStart = FALSE; - pAd->ate.bQARxStart = FALSE; -#ifdef RALINK_28xx_QA - //pAd->ate.Repeat = 0; - pAd->ate.TxStatus = 0; - pAd->ate.AtePid = 0; -#endif // RALINK_28xx_QA // -#endif // RALINK_ATE // - - - pAd->CommonCfg.bWiFiTest = FALSE; - - - DBGPRINT(RT_DEBUG_TRACE, ("<-- UserCfgInit\n")); -} - -// IRQL = PASSIVE_LEVEL -UCHAR BtoH(char ch) -{ - if (ch >= '0' && ch <= '9') return (ch - '0'); // Handle numerals - if (ch >= 'A' && ch <= 'F') return (ch - 'A' + 0xA); // Handle capitol hex digits - if (ch >= 'a' && ch <= 'f') return (ch - 'a' + 0xA); // Handle small hex digits - return(255); -} - -// -// FUNCTION: AtoH(char *, UCHAR *, int) -// -// PURPOSE: Converts ascii string to network order hex -// -// PARAMETERS: -// src - pointer to input ascii string -// dest - pointer to output hex -// destlen - size of dest -// -// COMMENTS: -// -// 2 ascii bytes make a hex byte so must put 1st ascii byte of pair -// into upper nibble and 2nd ascii byte of pair into lower nibble. -// -// IRQL = PASSIVE_LEVEL - -void AtoH(char * src, UCHAR * dest, int destlen) -{ - char * srcptr; - PUCHAR destTemp; - - srcptr = src; - destTemp = (PUCHAR) dest; - - while(destlen--) - { - *destTemp = BtoH(*srcptr++) << 4; // Put 1st ascii byte in upper nibble. - *destTemp += BtoH(*srcptr++); // Add 2nd ascii byte to above. - destTemp++; - } -} - -VOID RTMPPatchMacBbpBug( - IN PRTMP_ADAPTER pAd) -{ - ULONG Index; - - // Initialize BBP register to default value - for (Index = 0; Index < NUM_BBP_REG_PARMS; Index++) - { - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBPRegTable[Index].Register, (UCHAR)BBPRegTable[Index].Value); - } - - // Initialize RF register to default value - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - - // Re-init BBP register from EEPROM value - NICInitAsicFromEEPROM(pAd); -} - -/* - ======================================================================== - - Routine Description: - Init timer objects - - Arguments: - pAd Pointer to our adapter - pTimer Timer structure - pTimerFunc Function to execute when timer expired - Repeat Ture for period timer - - Return Value: - None - - Note: - - ======================================================================== -*/ -VOID RTMPInitTimer( - IN PRTMP_ADAPTER pAd, - IN PRALINK_TIMER_STRUCT pTimer, - IN PVOID pTimerFunc, - IN PVOID pData, - IN BOOLEAN Repeat) -{ - // - // Set Valid to TRUE for later used. - // It will crash if we cancel a timer or set a timer - // that we haven't initialize before. - // - pTimer->Valid = TRUE; - - pTimer->PeriodicType = Repeat; - pTimer->State = FALSE; - pTimer->cookie = (ULONG) pData; - -#ifdef RT2870 - pTimer->pAd = pAd; -#endif // RT2870 // - - RTMP_OS_Init_Timer(pAd, &pTimer->TimerObj, pTimerFunc, (PVOID) pTimer); -} - -/* - ======================================================================== - - Routine Description: - Init timer objects - - Arguments: - pTimer Timer structure - Value Timer value in milliseconds - - Return Value: - None - - Note: - To use this routine, must call RTMPInitTimer before. - - ======================================================================== -*/ -VOID RTMPSetTimer( - IN PRALINK_TIMER_STRUCT pTimer, - IN ULONG Value) -{ - if (pTimer->Valid) - { - pTimer->TimerValue = Value; - pTimer->State = FALSE; - if (pTimer->PeriodicType == TRUE) - { - pTimer->Repeat = TRUE; - RTMP_SetPeriodicTimer(&pTimer->TimerObj, Value); - } - else - { - pTimer->Repeat = FALSE; - RTMP_OS_Add_Timer(&pTimer->TimerObj, Value); - } - } - else - { - DBGPRINT_ERR(("RTMPSetTimer failed, Timer hasn't been initialize!\n")); - } -} - - -/* - ======================================================================== - - Routine Description: - Init timer objects - - Arguments: - pTimer Timer structure - Value Timer value in milliseconds - - Return Value: - None - - Note: - To use this routine, must call RTMPInitTimer before. - - ======================================================================== -*/ -VOID RTMPModTimer( - IN PRALINK_TIMER_STRUCT pTimer, - IN ULONG Value) -{ - BOOLEAN Cancel; - - if (pTimer->Valid) - { - pTimer->TimerValue = Value; - pTimer->State = FALSE; - if (pTimer->PeriodicType == TRUE) - { - RTMPCancelTimer(pTimer, &Cancel); - RTMPSetTimer(pTimer, Value); - } - else - { - RTMP_OS_Mod_Timer(&pTimer->TimerObj, Value); - } - } - else - { - DBGPRINT_ERR(("RTMPModTimer failed, Timer hasn't been initialize!\n")); - } -} - -/* - ======================================================================== - - Routine Description: - Cancel timer objects - - Arguments: - Adapter Pointer to our adapter - - Return Value: - None - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - Note: - 1.) To use this routine, must call RTMPInitTimer before. - 2.) Reset NIC to initial state AS IS system boot up time. - - ======================================================================== -*/ -VOID RTMPCancelTimer( - IN PRALINK_TIMER_STRUCT pTimer, - OUT BOOLEAN *pCancelled) -{ - if (pTimer->Valid) - { - if (pTimer->State == FALSE) - pTimer->Repeat = FALSE; - RTMP_OS_Del_Timer(&pTimer->TimerObj, pCancelled); - - if (*pCancelled == TRUE) - pTimer->State = TRUE; - -#ifdef RT2870 - // We need to go-through the TimerQ to findout this timer handler and remove it if - // it's still waiting for execution. - - RT2870_TimerQ_Remove(pTimer->pAd, pTimer); -#endif // RT2870 // - } - else - { - // - // NdisMCancelTimer just canced the timer and not mean release the timer. - // And don't set the "Valid" to False. So that we can use this timer again. - // - DBGPRINT_ERR(("RTMPCancelTimer failed, Timer hasn't been initialize!\n")); - } -} - -/* - ======================================================================== - - Routine Description: - Set LED Status - - Arguments: - pAd Pointer to our adapter - Status LED Status - - Return Value: - None - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -VOID RTMPSetLED( - IN PRTMP_ADAPTER pAd, - IN UCHAR Status) -{ - //ULONG data; - UCHAR HighByte = 0; - UCHAR LowByte; - -// In ATE mode of RT2860 AP/STA, we have erased 8051 firmware. -// So LED mode is not supported when ATE is running. -#ifdef RALINK_ATE - if (ATE_ON(pAd)) - return; -#endif // RALINK_ATE // - - LowByte = pAd->LedCntl.field.LedMode&0x7f; - switch (Status) - { - case LED_LINK_DOWN: - HighByte = 0x20; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - pAd->LedIndicatorStregth = 0; - break; - case LED_LINK_UP: - if (pAd->CommonCfg.Channel > 14) - HighByte = 0xa0; - else - HighByte = 0x60; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - break; - case LED_RADIO_ON: - HighByte = 0x20; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - break; - case LED_HALT: - LowByte = 0; // Driver sets MAC register and MAC controls LED - case LED_RADIO_OFF: - HighByte = 0; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - break; - case LED_WPS: - HighByte = 0x10; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - break; - case LED_ON_SITE_SURVEY: - HighByte = 0x08; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - break; - case LED_POWER_UP: - HighByte = 0x04; - AsicSendCommandToMcu(pAd, 0x50, 0xff, LowByte, HighByte); - break; - default: - DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status %d\n", Status)); - break; - } - - // - // Keep LED status for LED SiteSurvey mode. - // After SiteSurvey, we will set the LED mode to previous status. - // - if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP)) - pAd->LedStatus = Status; - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetLED::Mode=%d,HighByte=0x%02x,LowByte=0x%02x\n", pAd->LedCntl.field.LedMode, HighByte, LowByte)); -} - -/* - ======================================================================== - - Routine Description: - Set LED Signal Stregth - - Arguments: - pAd Pointer to our adapter - Dbm Signal Stregth - - Return Value: - None - - IRQL = PASSIVE_LEVEL - - Note: - Can be run on any IRQL level. - - According to Microsoft Zero Config Wireless Signal Stregth definition as belows. - <= -90 No Signal - <= -81 Very Low - <= -71 Low - <= -67 Good - <= -57 Very Good - > -57 Excellent - ======================================================================== -*/ -VOID RTMPSetSignalLED( - IN PRTMP_ADAPTER pAd, - IN NDIS_802_11_RSSI Dbm) -{ - UCHAR nLed = 0; - - // - // if not Signal Stregth, then do nothing. - // - if (pAd->LedCntl.field.LedMode != LED_MODE_SIGNAL_STREGTH) - { - return; - } - - if (Dbm <= -90) - nLed = 0; - else if (Dbm <= -81) - nLed = 1; - else if (Dbm <= -71) - nLed = 3; - else if (Dbm <= -67) - nLed = 7; - else if (Dbm <= -57) - nLed = 15; - else - nLed = 31; - - // - // Update Signal Stregth to firmware if changed. - // - if (pAd->LedIndicatorStregth != nLed) - { - AsicSendCommandToMcu(pAd, 0x51, 0xff, nLed, pAd->LedCntl.field.Polarity); - pAd->LedIndicatorStregth = nLed; - } -} - -/* - ======================================================================== - - Routine Description: - Enable RX - - Arguments: - pAd Pointer to our adapter - - Return Value: - None - - IRQL <= DISPATCH_LEVEL - - Note: - Before Enable RX, make sure you have enabled Interrupt. - ======================================================================== -*/ -VOID RTMPEnableRxTx( - IN PRTMP_ADAPTER pAd) -{ -// WPDMA_GLO_CFG_STRUC GloCfg; -// ULONG i = 0; - - DBGPRINT(RT_DEBUG_TRACE, ("==> RTMPEnableRxTx\n")); - - // Enable Rx DMA. - RT28XXDMAEnable(pAd); - - // enable RX of MAC block - if (pAd->OpMode == OPMODE_AP) - { - UINT32 rx_filter_flag = APNORMAL; - - - RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, rx_filter_flag); // enable RX of DMA block - } - else - { - RTMP_IO_WRITE32(pAd, RX_FILTR_CFG, STANORMAL); // Staion not drop control frame will fail WiFi Certification. - } - - RTMP_IO_WRITE32(pAd, MAC_SYS_CTRL, 0xc); - DBGPRINT(RT_DEBUG_TRACE, ("<== RTMPEnableRxTx\n")); -} - - +#include "../../rt2870/common/rtmp_init.c" |