diff options
Diffstat (limited to 'drivers/staging/rt2870/common/cmm_info.c')
| -rw-r--r-- | drivers/staging/rt2870/common/cmm_info.c | 3713 |
1 files changed, 1 insertions, 3712 deletions
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c index 47a1b1a73f0..226187ee556 100644 --- a/drivers/staging/rt2870/common/cmm_info.c +++ b/drivers/staging/rt2870/common/cmm_info.c @@ -1,3712 +1 @@ -/* - ************************************************************************* - * Ralink Tech Inc. - * 5F., No.36, Taiyuan St., Jhubei City, - * Hsinchu County 302, - * Taiwan, R.O.C. - * - * (c) Copyright 2002-2007, Ralink Technology, Inc. - * - * This program is free software; you can redistribute it and/or modify * - * it under the terms of the GNU General Public License as published by * - * the Free Software Foundation; either version 2 of the License, or * - * (at your option) any later version. * - * * - * This program is distributed in the hope that it will be useful, * - * but WITHOUT ANY WARRANTY; without even the implied warranty of * - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * - * GNU General Public License for more details. * - * * - * You should have received a copy of the GNU General Public License * - * along with this program; if not, write to the * - * Free Software Foundation, Inc., * - * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. * - * * - ************************************************************************* -*/ - -#include "../rt_config.h" - -INT Show_SSID_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_WirelessMode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_TxBurst_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_TxPreamble_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_TxPower_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_Channel_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_BGProtection_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_RTSThreshold_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_FragThreshold_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -#ifdef DOT11_N_SUPPORT -INT Show_HtBw_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtMcs_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtGi_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtOpMode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtExtcha_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtMpduDensity_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtBaWinSize_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtRdg_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtAmsdu_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_HtAutoBa_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); -#endif // DOT11_N_SUPPORT // - -INT Show_CountryRegion_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_CountryRegionABand_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_CountryCode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -#ifdef AGGREGATION_SUPPORT -INT Show_PktAggregate_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); -#endif // AGGREGATION_SUPPORT // - -#ifdef WMM_SUPPORT -INT Show_WmmCapable_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); -#endif // WMM_SUPPORT // - -INT Show_IEEE80211H_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -#ifdef CONFIG_STA_SUPPORT -INT Show_NetworkType_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); -#endif // CONFIG_STA_SUPPORT // - -INT Show_AuthMode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_EncrypType_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_DefaultKeyID_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_Key1_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_Key2_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_Key3_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_Key4_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -INT Show_WPAPSK_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf); - -static struct { - CHAR *name; - INT (*show_proc)(PRTMP_ADAPTER pAdapter, PUCHAR arg); -} *PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC, RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC[] = { - {"SSID", Show_SSID_Proc}, - {"WirelessMode", Show_WirelessMode_Proc}, - {"TxBurst", Show_TxBurst_Proc}, - {"TxPreamble", Show_TxPreamble_Proc}, - {"TxPower", Show_TxPower_Proc}, - {"Channel", Show_Channel_Proc}, - {"BGProtection", Show_BGProtection_Proc}, - {"RTSThreshold", Show_RTSThreshold_Proc}, - {"FragThreshold", Show_FragThreshold_Proc}, -#ifdef DOT11_N_SUPPORT - {"HtBw", Show_HtBw_Proc}, - {"HtMcs", Show_HtMcs_Proc}, - {"HtGi", Show_HtGi_Proc}, - {"HtOpMode", Show_HtOpMode_Proc}, - {"HtExtcha", Show_HtExtcha_Proc}, - {"HtMpduDensity", Show_HtMpduDensity_Proc}, - {"HtBaWinSize", Show_HtBaWinSize_Proc}, - {"HtRdg", Show_HtRdg_Proc}, - {"HtAmsdu", Show_HtAmsdu_Proc}, - {"HtAutoBa", Show_HtAutoBa_Proc}, -#endif // DOT11_N_SUPPORT // - {"CountryRegion", Show_CountryRegion_Proc}, - {"CountryRegionABand", Show_CountryRegionABand_Proc}, - {"CountryCode", Show_CountryCode_Proc}, -#ifdef AGGREGATION_SUPPORT - {"PktAggregate", Show_PktAggregate_Proc}, -#endif - -#ifdef WMM_SUPPORT - {"WmmCapable", Show_WmmCapable_Proc}, -#endif - {"IEEE80211H", Show_IEEE80211H_Proc}, -#ifdef CONFIG_STA_SUPPORT - {"NetworkType", Show_NetworkType_Proc}, -#endif // CONFIG_STA_SUPPORT // - {"AuthMode", Show_AuthMode_Proc}, - {"EncrypType", Show_EncrypType_Proc}, - {"DefaultKeyID", Show_DefaultKeyID_Proc}, - {"Key1", Show_Key1_Proc}, - {"Key2", Show_Key2_Proc}, - {"Key3", Show_Key3_Proc}, - {"Key4", Show_Key4_Proc}, - {"WPAPSK", Show_WPAPSK_Proc}, - {NULL, NULL} -}; - -/* - ========================================================================== - Description: - Get Driver version. - - Return: - ========================================================================== -*/ -INT Set_DriverVersion_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION)); -#endif // CONFIG_STA_SUPPORT // - - return TRUE; -} - -/* - ========================================================================== - Description: - Set Country Region. - This command will not work, if the field of CountryRegion in eeprom is programmed. - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_CountryRegion_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG region; - - region = simple_strtol(arg, 0, 10); - -#ifdef EXT_BUILD_CHANNEL_LIST - return -EOPNOTSUPP; -#endif // EXT_BUILD_CHANNEL_LIST // - - // Country can be set only when EEPROM not programmed - if (pAd->CommonCfg.CountryRegion & 0x80) - { - DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameter of CountryRegion in eeprom is programmed \n")); - return FALSE; - } - - if((region >= 0) && (region <= REGION_MAXIMUM_BG_BAND)) - { - pAd->CommonCfg.CountryRegion = (UCHAR) region; - } - else if (region == REGION_31_BG_BAND) - { - pAd->CommonCfg.CountryRegion = (UCHAR) region; - } - else - { - DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegion_Proc::parameters out of range\n")); - return FALSE; - } - - // if set country region, driver needs to be reset - BuildChannelList(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegion_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegion)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set Country Region for A band. - This command will not work, if the field of CountryRegion in eeprom is programmed. - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_CountryRegionABand_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG region; - - region = simple_strtol(arg, 0, 10); - -#ifdef EXT_BUILD_CHANNEL_LIST - return -EOPNOTSUPP; -#endif // EXT_BUILD_CHANNEL_LIST // - - // Country can be set only when EEPROM not programmed - if (pAd->CommonCfg.CountryRegionForABand & 0x80) - { - DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameter of CountryRegion in eeprom is programmed \n")); - return FALSE; - } - - if((region >= 0) && (region <= REGION_MAXIMUM_A_BAND)) - { - pAd->CommonCfg.CountryRegionForABand = (UCHAR) region; - } - else - { - DBGPRINT(RT_DEBUG_ERROR, ("Set_CountryRegionABand_Proc::parameters out of range\n")); - return FALSE; - } - - // if set country region, driver needs to be reset - BuildChannelList(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_CountryRegionABand_Proc::(CountryRegion=%d)\n", pAd->CommonCfg.CountryRegionForABand)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set Wireless Mode - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_WirelessMode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG WirelessMode; - INT success = TRUE; - - WirelessMode = simple_strtol(arg, 0, 10); - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - INT MaxPhyMode = PHY_11G; - -#ifdef DOT11_N_SUPPORT - MaxPhyMode = PHY_11N_5G; -#endif // DOT11_N_SUPPORT // - - if (WirelessMode <= MaxPhyMode) - { - RTMPSetPhyMode(pAd, WirelessMode); -#ifdef DOT11_N_SUPPORT - if (WirelessMode >= PHY_11ABGN_MIXED) - { - pAd->CommonCfg.BACapability.field.AutoBA = TRUE; - pAd->CommonCfg.REGBACapability.field.AutoBA = TRUE; - } - else - { - pAd->CommonCfg.BACapability.field.AutoBA = FALSE; - pAd->CommonCfg.REGBACapability.field.AutoBA = FALSE; - } -#endif // DOT11_N_SUPPORT // - // Set AdhocMode rates - if (pAd->StaCfg.BssType == BSS_ADHOC) - { - MlmeUpdateTxRates(pAd, FALSE, 0); - MakeIbssBeacon(pAd); // re-build BEACON frame - AsicEnableIbssSync(pAd); // copy to on-chip memory - } - } - else - { - success = FALSE; - } - } -#endif // CONFIG_STA_SUPPORT // - - // it is needed to set SSID to take effect - if (success == TRUE) - { -#ifdef DOT11_N_SUPPORT - SetCommonHT(pAd); -#endif // DOT11_N_SUPPORT // - DBGPRINT(RT_DEBUG_TRACE, ("Set_WirelessMode_Proc::(=%ld)\n", WirelessMode)); - } - else - { - DBGPRINT(RT_DEBUG_ERROR, ("Set_WirelessMode_Proc::parameters out of range\n")); - } - - return success; -} - -/* - ========================================================================== - Description: - Set Channel - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_Channel_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - INT success = TRUE; - UCHAR Channel; - - Channel = (UCHAR) simple_strtol(arg, 0, 10); - - // check if this channel is valid - if (ChannelSanity(pAd, Channel) == TRUE) - { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - pAd->CommonCfg.Channel = Channel; - - if (MONITOR_ON(pAd)) - { -#ifdef DOT11_N_SUPPORT - N_ChannelCheck(pAd); - if (pAd->CommonCfg.PhyMode >= PHY_11ABGN_MIXED && - pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) - { - N_SetCenCh(pAd); - AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel); - DBGPRINT(RT_DEBUG_TRACE, ("BW_40, control_channel(%d), CentralChannel(%d) \n", - pAd->CommonCfg.Channel, pAd->CommonCfg.CentralChannel)); - } - else -#endif // DOT11_N_SUPPORT // - { - AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE); - AsicLockChannel(pAd, pAd->CommonCfg.Channel); - DBGPRINT(RT_DEBUG_TRACE, ("BW_20, Channel(%d)\n", pAd->CommonCfg.Channel)); - } - } - } -#endif // CONFIG_STA_SUPPORT // - success = TRUE; - } - else - { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - success = FALSE; -#endif // CONFIG_STA_SUPPORT // - } - - - if (success == TRUE) - DBGPRINT(RT_DEBUG_TRACE, ("Set_Channel_Proc::(Channel=%d)\n", pAd->CommonCfg.Channel)); - - return success; -} - -/* - ========================================================================== - Description: - Set Short Slot Time Enable or Disable - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ShortSlot_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG ShortSlot; - - ShortSlot = simple_strtol(arg, 0, 10); - - if (ShortSlot == 1) - pAd->CommonCfg.bUseShortSlotTime = TRUE; - else if (ShortSlot == 0) - pAd->CommonCfg.bUseShortSlotTime = FALSE; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_ShortSlot_Proc::(ShortSlot=%d)\n", pAd->CommonCfg.bUseShortSlotTime)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set Tx power - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_TxPower_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG TxPower; - INT success = FALSE; - - TxPower = (ULONG) simple_strtol(arg, 0, 10); - if (TxPower <= 100) - { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - pAd->CommonCfg.TxPowerDefault = TxPower; - pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault; - } -#endif // CONFIG_STA_SUPPORT // - success = TRUE; - } - else - success = FALSE; - - DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPower_Proc::(TxPowerPercentage=%ld)\n", pAd->CommonCfg.TxPowerPercentage)); - - return success; -} - -/* - ========================================================================== - Description: - Set 11B/11G Protection - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_BGProtection_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - switch (simple_strtol(arg, 0, 10)) - { - case 0: //AUTO - pAd->CommonCfg.UseBGProtection = 0; - break; - case 1: //Always On - pAd->CommonCfg.UseBGProtection = 1; - break; - case 2: //Always OFF - pAd->CommonCfg.UseBGProtection = 2; - break; - default: //Invalid argument - return FALSE; - } - - - DBGPRINT(RT_DEBUG_TRACE, ("Set_BGProtection_Proc::(BGProtection=%ld)\n", pAd->CommonCfg.UseBGProtection)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set TxPreamble - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_TxPreamble_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - RT_802_11_PREAMBLE Preamble; - - Preamble = simple_strtol(arg, 0, 10); - - - switch (Preamble) - { - case Rt802_11PreambleShort: - pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - MlmeSetTxPreamble(pAd, Rt802_11PreambleShort); -#endif // CONFIG_STA_SUPPORT // - break; - case Rt802_11PreambleLong: -#ifdef CONFIG_STA_SUPPORT - case Rt802_11PreambleAuto: - // if user wants AUTO, initialize to LONG here, then change according to AP's - // capability upon association. -#endif // CONFIG_STA_SUPPORT // - pAd->CommonCfg.TxPreamble = Preamble; -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - MlmeSetTxPreamble(pAd, Rt802_11PreambleLong); -#endif // CONFIG_STA_SUPPORT // - break; - default: //Invalid argument - return FALSE; - } - - DBGPRINT(RT_DEBUG_TRACE, ("Set_TxPreamble_Proc::(TxPreamble=%ld)\n", pAd->CommonCfg.TxPreamble)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set RTS Threshold - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_RTSThreshold_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - NDIS_802_11_RTS_THRESHOLD RtsThresh; - - RtsThresh = simple_strtol(arg, 0, 10); - - if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD)) - pAd->CommonCfg.RtsThreshold = (USHORT)RtsThresh; -#ifdef CONFIG_STA_SUPPORT - else if (RtsThresh == 0) - pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD; -#endif // CONFIG_STA_SUPPORT // - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_RTSThreshold_Proc::(RTSThreshold=%d)\n", pAd->CommonCfg.RtsThreshold)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set Fragment Threshold - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_FragThreshold_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - NDIS_802_11_FRAGMENTATION_THRESHOLD FragThresh; - - FragThresh = simple_strtol(arg, 0, 10); - - if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD) - { - //Illegal FragThresh so we set it to default - pAd->CommonCfg.FragmentThreshold = MAX_FRAG_THRESHOLD; - } - else if (FragThresh % 2 == 1) - { - // The length of each fragment shall always be an even number of octets, except for the last fragment - // of an MSDU or MMPDU, which may be either an even or an odd number of octets. - pAd->CommonCfg.FragmentThreshold = (USHORT)(FragThresh - 1); - } - else - { - pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh; - } - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD) - pAd->CommonCfg.bUseZeroToDisableFragment = TRUE; - else - pAd->CommonCfg.bUseZeroToDisableFragment = FALSE; - } -#endif // CONFIG_STA_SUPPORT // - - DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold)); - - return TRUE; -} - -/* - ========================================================================== - Description: - Set TxBurst - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_TxBurst_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG TxBurst; - - TxBurst = simple_strtol(arg, 0, 10); - if (TxBurst == 1) - pAd->CommonCfg.bEnableTxBurst = TRUE; - else if (TxBurst == 0) - pAd->CommonCfg.bEnableTxBurst = FALSE; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_TxBurst_Proc::(TxBurst=%d)\n", pAd->CommonCfg.bEnableTxBurst)); - - return TRUE; -} - -#ifdef AGGREGATION_SUPPORT -/* - ========================================================================== - Description: - Set TxBurst - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_PktAggregate_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG aggre; - - aggre = simple_strtol(arg, 0, 10); - - if (aggre == 1) - pAd->CommonCfg.bAggregationCapable = TRUE; - else if (aggre == 0) - pAd->CommonCfg.bAggregationCapable = FALSE; - else - return FALSE; //Invalid argument - - - DBGPRINT(RT_DEBUG_TRACE, ("Set_PktAggregate_Proc::(AGGRE=%d)\n", pAd->CommonCfg.bAggregationCapable)); - - return TRUE; -} -#endif - -/* - ========================================================================== - Description: - Set IEEE80211H. - This parameter is 1 when needs radar detection, otherwise 0 - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_IEEE80211H_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG ieee80211h; - - ieee80211h = simple_strtol(arg, 0, 10); - - if (ieee80211h == 1) - pAd->CommonCfg.bIEEE80211H = TRUE; - else if (ieee80211h == 0) - pAd->CommonCfg.bIEEE80211H = FALSE; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_IEEE80211H_Proc::(IEEE80211H=%d)\n", pAd->CommonCfg.bIEEE80211H)); - - return TRUE; -} - - -#ifdef DBG -/* - ========================================================================== - Description: - For Debug information - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_Debug_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - DBGPRINT(RT_DEBUG_TRACE, ("==> Set_Debug_Proc *******************\n")); - - if(simple_strtol(arg, 0, 10) <= RT_DEBUG_LOUD) - RTDebugLevel = simple_strtol(arg, 0, 10); - - DBGPRINT(RT_DEBUG_TRACE, ("<== Set_Debug_Proc(RTDebugLevel = %ld)\n", RTDebugLevel)); - - return TRUE; -} -#endif - -INT Show_DescInfo_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - - return TRUE; -} - -/* - ========================================================================== - Description: - Reset statistics counter - - Arguments: - pAdapter Pointer to our adapter - arg - - Return: - TRUE if all parameters are OK, FALSE otherwise - ========================================================================== -*/ -INT Set_ResetStatCounter_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - //UCHAR i; - //MAC_TABLE_ENTRY *pEntry; - - DBGPRINT(RT_DEBUG_TRACE, ("==>Set_ResetStatCounter_Proc\n")); - - // add the most up-to-date h/w raw counters into software counters - NICUpdateRawCounters(pAd); - - NdisZeroMemory(&pAd->WlanCounters, sizeof(COUNTER_802_11)); - NdisZeroMemory(&pAd->Counters8023, sizeof(COUNTER_802_3)); - NdisZeroMemory(&pAd->RalinkCounters, sizeof(COUNTER_RALINK)); - - // Reset HotSpot counter -#if 0 // ToDo. - for (i = 0; i < MAX_LEN_OF_MAC_TABLE; i++) - { - pEntry = &pAd->MacTab.Content[i]; - - if ((pEntry->Valid == FALSE) || (pEntry->Sst != SST_ASSOC)) - continue; - - pEntry->HSCounter.LastDataPacketTime = 0; - pEntry->HSCounter.TotalRxByteCount= 0; - pEntry->HSCounter.TotalTxByteCount= 0; - } -#endif - - - return TRUE; -} - -/* - ======================================================================== - - Routine Description: - Add WPA key process. - In Adhoc WPANONE, bPairwise = 0; KeyIdx = 0; - - Arguments: - pAd Pointer to our adapter - pBuf Pointer to the where the key stored - - Return Value: - NDIS_SUCCESS Add key successfully - - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -#if 0 // remove by AlbertY -NDIS_STATUS RTMPWPAAddKeyProc( - IN PRTMP_ADAPTER pAd, - IN PVOID pBuf) -{ - PNDIS_802_11_KEY pKey; - ULONG KeyIdx; -// NDIS_STATUS Status; -// ULONG offset; // unused variable, snowpin 2006.07.13 - - PUCHAR pTxMic, pRxMic; - BOOLEAN bTxKey; // Set the key as transmit key - BOOLEAN bPairwise; // Indicate the key is pairwise key - BOOLEAN bKeyRSC; // indicate the receive SC set by KeyRSC value. - // Otherwise, it will set by the NIC. - BOOLEAN bAuthenticator; // indicate key is set by authenticator. - UCHAR apidx = BSS0; - - pKey = (PNDIS_802_11_KEY) pBuf; - KeyIdx = pKey->KeyIndex & 0xff; - // Bit 31 of Add-key, Tx Key - bTxKey = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE; - // Bit 30 of Add-key PairwiseKey - bPairwise = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE; - // Bit 29 of Add-key KeyRSC - bKeyRSC = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE; - // Bit 28 of Add-key Authenticator - bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE; - - DBGPRINT(RT_DEBUG_TRACE,("RTMPWPAAddKeyProc==>pKey->KeyIndex = %x. bPairwise= %d\n", pKey->KeyIndex, bPairwise)); - // 1. Check Group / Pairwise Key - if (bPairwise) // Pairwise Key - { - // 1. KeyIdx must be 0, otherwise, return NDIS_STATUS_INVALID_DATA - if (KeyIdx != 0) - return(NDIS_STATUS_INVALID_DATA); - - // 2. Check bTx, it must be true, otherwise, return NDIS_STATUS_INVALID_DATA - if (bTxKey == FALSE) - return(NDIS_STATUS_INVALID_DATA); - - // 3. If BSSID is all 0xff, return NDIS_STATUS_INVALID_DATA - if (MAC_ADDR_EQUAL(pKey->BSSID, BROADCAST_ADDR)) - return(NDIS_STATUS_INVALID_DATA); - - // 3.1 Check Pairwise key length for TKIP key. For AES, it's always 128 bits - //if ((pAdapter->PortCfg.WepStatus == Ndis802_11Encryption2Enabled) && (pKey->KeyLength != LEN_TKIP_KEY)) - if ((pAd->StaCfg.PairCipher == Ndis802_11Encryption2Enabled) && (pKey->KeyLength != LEN_TKIP_KEY)) - return(NDIS_STATUS_INVALID_DATA); - - pAd->SharedKey[apidx][KeyIdx].Type = PAIRWISE_KEY; - - if (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) - { - // Send media specific event to start PMKID caching - RTMPIndicateWPA2Status(pAd); - } - } - else - { - // 1. Check BSSID, if not current BSSID or Bcast, return NDIS_STATUS_INVALID_DATA - if ((! MAC_ADDR_EQUAL(pKey->BSSID, BROADCAST_ADDR)) && - (! MAC_ADDR_EQUAL(pKey->BSSID, pAd->ApCfg.MBSSID[apidx].Bssid))) - return(NDIS_STATUS_INVALID_DATA); - - // 2. Check Key index for supported Group Key - if (KeyIdx >= GROUP_KEY_NUM) - return(NDIS_STATUS_INVALID_DATA); - - // 3. Set as default Tx Key if bTxKey is TRUE - if (bTxKey == TRUE) - pAd->ApCfg.MBSSID[apidx].DefaultKeyId = (UCHAR) KeyIdx; - - pAd->SharedKey[apidx][KeyIdx].Type = GROUP_KEY; - } - - // 4. Select RxMic / TxMic based on Supp / Authenticator - if (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPANone) - { - // for WPA-None Tx, Rx MIC is the same - pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16; - pRxMic = pTxMic; - } - else if (bAuthenticator == TRUE) - { - pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 16; - pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 24; - } - else - { - pRxMic = (PUCHAR) (&pKey->KeyMaterial) + 16; - pTxMic = (PUCHAR) (&pKey->KeyMaterial) + 24; - } - - // 6. Check RxTsc - if (bKeyRSC == TRUE) - { - NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].RxTsc, &pKey->KeyRSC, 6); - NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.RxTsc, &pKey->KeyRSC, 6); - } - else - { - NdisZeroMemory(pAd->SharedKey[apidx][KeyIdx].RxTsc, 6); - } - - // 7. Copy information into Pairwise Key structure. - // pKey->KeyLength will include TxMic and RxMic, therefore, we use 16 bytes hardcoded. - pAd->SharedKey[apidx][KeyIdx].KeyLen = (UCHAR) pKey->KeyLength; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = (UCHAR)pKey->KeyLength; - NdisMoveMemory(pAd->SharedKey[BSS0][KeyIdx].Key, &pKey->KeyMaterial, 16); - NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.Key, &pKey->KeyMaterial, 16); - if (pKey->KeyLength == LEN_TKIP_KEY) - { - // Only Key lenth equal to TKIP key have these - NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].RxMic, pRxMic, 8); - NdisMoveMemory(pAd->SharedKey[apidx][KeyIdx].TxMic, pTxMic, 8); - NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.RxMic, pRxMic, 8); - NdisMoveMemory(pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxMic, pTxMic, 8); - } - - COPY_MAC_ADDR(pAd->SharedKey[BSS0][KeyIdx].BssId, pKey->BSSID); - - // Init TxTsc to one based on WiFi WPA specs - pAd->SharedKey[apidx][KeyIdx].TxTsc[0] = 1; - pAd->SharedKey[apidx][KeyIdx].TxTsc[1] = 0; - pAd->SharedKey[apidx][KeyIdx].TxTsc[2] = 0; - pAd->SharedKey[apidx][KeyIdx].TxTsc[3] = 0; - pAd->SharedKey[apidx][KeyIdx].TxTsc[4] = 0; - pAd->SharedKey[apidx][KeyIdx].TxTsc[5] = 0; - // 4. Init TxTsc to one based on WiFi WPA specs - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[0] = 1; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[1] = 0; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[2] = 0; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[3] = 0; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[4] = 0; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.TxTsc[5] = 0; - - if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption3Enabled) - { - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_AES; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_AES; - } - else if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption2Enabled) - { - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_TKIP; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_TKIP; - } - else if (pAd->ApCfg.MBSSID[apidx].WepStatus == Ndis802_11Encryption1Enabled) - { - if (pAd->SharedKey[apidx][KeyIdx].KeyLen == 5) - { - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_WEP64; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_WEP64; - } - else if (pAd->SharedKey[apidx][KeyIdx].KeyLen == 13) - { - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_WEP128; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_WEP128; - } - else - { - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_NONE; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_NONE; - } - } - else - { - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_NONE; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = CIPHER_NONE; - } - - if ((pAd->OpMode == OPMODE_STA)) // Pairwise Key. Add BSSID to WCTable - { - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.CipherAlg = pAd->SharedKey[BSS0][KeyIdx].CipherAlg; - pAd->MacTab.Content[BSSID_WCID].PairwiseKey.KeyLen = pAd->SharedKey[BSS0][KeyIdx].KeyLen; - } - - if ((pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2) || - (pAd->ApCfg.MBSSID[apidx].AuthMode == Ndis802_11AuthModeWPA2PSK)) - { - // - // On WPA2, Update Group Key Cipher. - // - if (!bPairwise) - { - if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption3Enabled) - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_AES; - else if (pAd->StaCfg.GroupCipher == Ndis802_11Encryption2Enabled) - pAd->SharedKey[apidx][KeyIdx].CipherAlg = CIPHER_TKIP; - } - } - - DBGPRINT(RT_DEBUG_TRACE, ("pAd->SharedKey[%d][%d].CipherAlg = %d\n", apidx, KeyIdx, pAd->SharedKey[apidx][KeyIdx].CipherAlg)); - -#if 0 - DBGPRINT_RAW(RT_DEBUG_TRACE, ("%s Key #%d", CipherName[pAd->SharedKey[apidx][KeyIdx].CipherAlg],KeyIdx)); - for (i = 0; i < 16; i++) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].Key[i])); - } - DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n Rx MIC Key = ")); - for (i = 0; i < 8; i++) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].RxMic[i])); - } - DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n Tx MIC Key = ")); - for (i = 0; i < 8; i++) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].TxMic[i])); - } - DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n RxTSC = ")); - for (i = 0; i < 6; i++) - { - DBGPRINT_RAW(RT_DEBUG_TRACE, ("%02x:", pAd->SharedKey[apidx][KeyIdx].RxTsc[i])); - } -#endif - DBGPRINT_RAW(RT_DEBUG_TRACE, ("\n pKey-> BSSID:%02x:%02x:%02x:%02x:%02x:%02x \n", - pKey->BSSID[0],pKey->BSSID[1],pKey->BSSID[2],pKey->BSSID[3],pKey->BSSID[4],pKey->BSSID[5])); - - if ((bTxKey) && (pAd->OpMode == OPMODE_STA)) // Pairwise Key. Add BSSID to WCTable - RTMPAddBSSIDCipher(pAd, BSSID_WCID, pKey, pAd->SharedKey[BSS0][KeyIdx].CipherAlg); - - - // No matter pairwise key or what leyidx is, always has a copy at on-chip SharedKeytable. - AsicAddSharedKeyEntry(pAd, - apidx, - (UCHAR)KeyIdx, - pAd->SharedKey[apidx][KeyIdx].CipherAlg, - pAd->SharedKey[apidx][KeyIdx].Key, - pAd->SharedKey[apidx][KeyIdx].TxMic, - pAd->SharedKey[apidx][KeyIdx].RxMic); - - // The WCID key specified in used at Tx. For STA, always use pairwise key. - - // ad-hoc mode need to specify WAP Group key with WCID index=BSS0Mcast_WCID. Let's always set this key here. -/* if (bPairwise == FALSE) - { - offset = MAC_IVEIV_TABLE_BASE + (BSS0Mcast_WCID * HW_IVEIV_ENTRY_SIZE); - NdisZeroMemory(IVEIV, 8); - // 1. IV/EIV - // Specify key index to find shared key. - if ((pAd->SharedKey[BSS0][KeyIdx].CipherAlg==CIPHER_TKIP) || - (pAd->SharedKey[BSS0][KeyIdx].CipherAlg==CIPHER_AES)) - IVEIV[3] = 0x20; // Eiv bit on. keyid always 0 for pairwise key - IVEIV[3] |= (KeyIdx<< 6); // groupkey index is not 0 - for (i=0; i<8; i++) - { - RTMP_IO_WRITE8(pAd, offset+i, IVEIV[i]); - } - - // 2. WCID Attribute UDF:3, BSSIdx:3, Alg:3, Keytable:use share key, BSSIdx is 0 - WCIDAttri = (pAd->SharedKey[BSS0][KeyIdx].CipherAlg<<1)|PAIRWISEKEYTABLE; - offset = MAC_WCID_ATTRIBUTE_BASE + (BSS0Mcast_WCID* HW_WCID_ATTRI_SIZE); - RTMP_IO_WRITE32(pAd, offset, WCIDAttri); - - } - -*/ - - if (pAd->SharedKey[apidx][KeyIdx].Type == GROUP_KEY) - { - // 802.1x port control - pAd->StaCfg.PortSecured = WPA_802_1X_PORT_SECURED; - DBGPRINT(RT_DEBUG_TRACE,("!!WPA_802_1X_PORT_SECURED!!\n")); - - } - - return (NDIS_STATUS_SUCCESS); -} -#endif - -BOOLEAN RTMPCheckStrPrintAble( - IN CHAR *pInPutStr, - IN UCHAR strLen) -{ - UCHAR i=0; - - for (i=0; i<strLen; i++) - { - if ((pInPutStr[i] < 0x21) || - (pInPutStr[i] > 0x7E)) - return FALSE; - } - - return TRUE; -} - -/* - ======================================================================== - - Routine Description: - Remove WPA Key process - - Arguments: - pAd Pointer to our adapter - pBuf Pointer to the where the key stored - - Return Value: - NDIS_SUCCESS Add key successfully - - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -#ifdef CONFIG_STA_SUPPORT -VOID RTMPSetDesiredRates( - IN PRTMP_ADAPTER pAdapter, - IN LONG Rates) -{ - NDIS_802_11_RATES aryRates; - - memset(&aryRates, 0x00, sizeof(NDIS_802_11_RATES)); - switch (pAdapter->CommonCfg.PhyMode) - { - case PHY_11A: // A only - switch (Rates) - { - case 6000000: //6M - aryRates[0] = 0x0c; // 6M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0; - break; - case 9000000: //9M - aryRates[0] = 0x12; // 9M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1; - break; - case 12000000: //12M - aryRates[0] = 0x18; // 12M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2; - break; - case 18000000: //18M - aryRates[0] = 0x24; // 18M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3; - break; - case 24000000: //24M - aryRates[0] = 0x30; // 24M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4; - break; - case 36000000: //36M - aryRates[0] = 0x48; // 36M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5; - break; - case 48000000: //48M - aryRates[0] = 0x60; // 48M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6; - break; - case 54000000: //54M - aryRates[0] = 0x6c; // 54M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7; - break; - case -1: //Auto - default: - aryRates[0] = 0x6c; // 54Mbps - aryRates[1] = 0x60; // 48Mbps - aryRates[2] = 0x48; // 36Mbps - aryRates[3] = 0x30; // 24Mbps - aryRates[4] = 0x24; // 18M - aryRates[5] = 0x18; // 12M - aryRates[6] = 0x12; // 9M - aryRates[7] = 0x0c; // 6M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; - break; - } - break; - case PHY_11BG_MIXED: // B/G Mixed - case PHY_11B: // B only - case PHY_11ABG_MIXED: // A/B/G Mixed - default: - switch (Rates) - { - case 1000000: //1M - aryRates[0] = 0x02; - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0; - break; - case 2000000: //2M - aryRates[0] = 0x04; - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1; - break; - case 5000000: //5.5M - aryRates[0] = 0x0b; // 5.5M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2; - break; - case 11000000: //11M - aryRates[0] = 0x16; // 11M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3; - break; - case 6000000: //6M - aryRates[0] = 0x0c; // 6M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_0; - break; - case 9000000: //9M - aryRates[0] = 0x12; // 9M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_1; - break; - case 12000000: //12M - aryRates[0] = 0x18; // 12M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_2; - break; - case 18000000: //18M - aryRates[0] = 0x24; // 18M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_3; - break; - case 24000000: //24M - aryRates[0] = 0x30; // 24M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_4; - break; - case 36000000: //36M - aryRates[0] = 0x48; // 36M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_5; - break; - case 48000000: //48M - aryRates[0] = 0x60; // 48M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_6; - break; - case 54000000: //54M - aryRates[0] = 0x6c; // 54M - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_7; - break; - case -1: //Auto - default: - if (pAdapter->CommonCfg.PhyMode == PHY_11B) - { //B Only - aryRates[0] = 0x16; // 11Mbps - aryRates[1] = 0x0b; // 5.5Mbps - aryRates[2] = 0x04; // 2Mbps - aryRates[3] = 0x02; // 1Mbps - } - else - { //(B/G) Mixed or (A/B/G) Mixed - aryRates[0] = 0x6c; // 54Mbps - aryRates[1] = 0x60; // 48Mbps - aryRates[2] = 0x48; // 36Mbps - aryRates[3] = 0x30; // 24Mbps - aryRates[4] = 0x16; // 11Mbps - aryRates[5] = 0x0b; // 5.5Mbps - aryRates[6] = 0x04; // 2Mbps - aryRates[7] = 0x02; // 1Mbps - } - pAdapter->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; - break; - } - break; - } - - NdisZeroMemory(pAdapter->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES); - NdisMoveMemory(pAdapter->CommonCfg.DesireRate, &aryRates, sizeof(NDIS_802_11_RATES)); - DBGPRINT(RT_DEBUG_TRACE, (" RTMPSetDesiredRates (%02x,%02x,%02x,%02x,%02x,%02x,%02x,%02x)\n", - pAdapter->CommonCfg.DesireRate[0],pAdapter->CommonCfg.DesireRate[1], - pAdapter->CommonCfg.DesireRate[2],pAdapter->CommonCfg.DesireRate[3], - pAdapter->CommonCfg.DesireRate[4],pAdapter->CommonCfg.DesireRate[5], - pAdapter->CommonCfg.DesireRate[6],pAdapter->CommonCfg.DesireRate[7] )); - // Changing DesiredRate may affect the MAX TX rate we used to TX frames out - MlmeUpdateTxRates(pAdapter, FALSE, 0); -} - -NDIS_STATUS RTMPWPARemoveKeyProc( - IN PRTMP_ADAPTER pAd, - IN PVOID pBuf) -{ - PNDIS_802_11_REMOVE_KEY pKey; - ULONG KeyIdx; - NDIS_STATUS Status = NDIS_STATUS_FAILURE; - BOOLEAN bTxKey; // Set the key as transmit key - BOOLEAN bPairwise; // Indicate the key is pairwise key - BOOLEAN bKeyRSC; // indicate the receive SC set by KeyRSC value. - // Otherwise, it will set by the NIC. - BOOLEAN bAuthenticator; // indicate key is set by authenticator. - INT i; - - DBGPRINT(RT_DEBUG_TRACE,("---> RTMPWPARemoveKeyProc\n")); - - pKey = (PNDIS_802_11_REMOVE_KEY) pBuf; - KeyIdx = pKey->KeyIndex & 0xff; - // Bit 31 of Add-key, Tx Key - bTxKey = (pKey->KeyIndex & 0x80000000) ? TRUE : FALSE; - // Bit 30 of Add-key PairwiseKey - bPairwise = (pKey->KeyIndex & 0x40000000) ? TRUE : FALSE; - // Bit 29 of Add-key KeyRSC - bKeyRSC = (pKey->KeyIndex & 0x20000000) ? TRUE : FALSE; - // Bit 28 of Add-key Authenticator - bAuthenticator = (pKey->KeyIndex & 0x10000000) ? TRUE : FALSE; - - // 1. If bTx is TRUE, return failure information - if (bTxKey == TRUE) - return(NDIS_STATUS_INVALID_DATA); - - // 2. Check Pairwise Key - if (bPairwise) - { - // a. If BSSID is broadcast, remove all pairwise keys. - // b. If not broadcast, remove the pairwise specified by BSSID - for (i = 0; i < SHARE_KEY_NUM; i++) - { - if (MAC_ADDR_EQUAL(pAd->SharedKey[BSS0][i].BssId, pKey->BSSID)) - { - DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%d)\n", i)); - pAd->SharedKey[BSS0][i].KeyLen = 0; - pAd->SharedKey[BSS0][i].CipherAlg = CIPHER_NONE; - AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)i); - Status = NDIS_STATUS_SUCCESS; - break; - } - } - } - // 3. Group Key - else - { - // a. If BSSID is broadcast, remove all group keys indexed - // b. If BSSID matched, delete the group key indexed. - DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveKeyProc(KeyIdx=%ld)\n", KeyIdx)); - pAd->SharedKey[BSS0][KeyIdx].KeyLen = 0; - pAd->SharedKey[BSS0][KeyIdx].CipherAlg = CIPHER_NONE; - AsicRemoveSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx); - Status = NDIS_STATUS_SUCCESS; - } - - return (Status); -} -#endif // CONFIG_STA_SUPPORT // - - -#ifdef CONFIG_STA_SUPPORT -/* - ======================================================================== - - Routine Description: - Remove All WPA Keys - - Arguments: - pAd Pointer to our adapter - - Return Value: - None - - IRQL = DISPATCH_LEVEL - - Note: - - ======================================================================== -*/ -VOID RTMPWPARemoveAllKeys( - IN PRTMP_ADAPTER pAd) -{ - - UCHAR i; - - DBGPRINT(RT_DEBUG_TRACE,("RTMPWPARemoveAllKeys(AuthMode=%d, WepStatus=%d)\n", pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus)); - - // For WEP/CKIP, there is no need to remove it, since WinXP won't set it again after - // Link up. And it will be replaced if user changed it. - if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA) - return; - - // For WPA-None, there is no need to remove it, since WinXP won't set it again after - // Link up. And it will be replaced if user changed it. - if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) - return; - - // set BSSID wcid entry of the Pair-wise Key table as no-security mode - AsicRemovePairwiseKeyEntry(pAd, BSS0, BSSID_WCID); - - // set all shared key mode as no-security. - for (i = 0; i < SHARE_KEY_NUM; i++) - { - DBGPRINT(RT_DEBUG_TRACE,("remove %s key #%d\n", CipherName[pAd->SharedKey[BSS0][i].CipherAlg], i)); - NdisZeroMemory(&pAd->SharedKey[BSS0][i], sizeof(CIPHER_KEY)); - - AsicRemoveSharedKeyEntry(pAd, BSS0, i); - } - -} -#endif // CONFIG_STA_SUPPORT // - -/* - ======================================================================== - Routine Description: - Change NIC PHY mode. Re-association may be necessary. possible settings - include - PHY_11B, PHY_11BG_MIXED, PHY_11A, and PHY_11ABG_MIXED - - Arguments: - pAd - Pointer to our adapter - phymode - - - IRQL = PASSIVE_LEVEL - IRQL = DISPATCH_LEVEL - - ======================================================================== -*/ -VOID RTMPSetPhyMode( - IN PRTMP_ADAPTER pAd, - IN ULONG phymode) -{ - INT i; - // the selected phymode must be supported by the RF IC encoded in E2PROM - - // if no change, do nothing - /* bug fix - if (pAd->CommonCfg.PhyMode == phymode) - return; - */ - pAd->CommonCfg.PhyMode = (UCHAR)phymode; - - DBGPRINT(RT_DEBUG_TRACE,("RTMPSetPhyMode : PhyMode=%d, channel=%d \n", pAd->CommonCfg.PhyMode, pAd->CommonCfg.Channel)); -#ifdef EXT_BUILD_CHANNEL_LIST - BuildChannelListEx(pAd); -#else - BuildChannelList(pAd); -#endif // EXT_BUILD_CHANNEL_LIST // - - // sanity check user setting - for (i = 0; i < pAd->ChannelListNum; i++) - { - if (pAd->CommonCfg.Channel == pAd->ChannelList[i].Channel) - break; - } - - if (i == pAd->ChannelListNum) - { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->CommonCfg.Channel = FirstChannel(pAd); -#endif // CONFIG_STA_SUPPORT // - DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel)); - } - - NdisZeroMemory(pAd->CommonCfg.SupRate, MAX_LEN_OF_SUPPORTED_RATES); - NdisZeroMemory(pAd->CommonCfg.ExtRate, MAX_LEN_OF_SUPPORTED_RATES); - NdisZeroMemory(pAd->CommonCfg.DesireRate, MAX_LEN_OF_SUPPORTED_RATES); - switch (phymode) { - case PHY_11B: - pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRateLen = 4; - pAd->CommonCfg.ExtRateLen = 0; - pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps - //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_CCK; // This MODE is only FYI. not use - break; - - case PHY_11G: - case PHY_11BG_MIXED: - case PHY_11ABG_MIXED: -#ifdef DOT11_N_SUPPORT - case PHY_11N_2_4G: - case PHY_11ABGN_MIXED: - case PHY_11BGN_MIXED: - case PHY_11GN_MIXED: -#endif // DOT11_N_SUPPORT // - pAd->CommonCfg.SupRate[0] = 0x82; // 1 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[1] = 0x84; // 2 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[2] = 0x8B; // 5.5 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[3] = 0x96; // 11 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[4] = 0x12; // 9 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[5] = 0x24; // 18 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[6] = 0x48; // 36 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRateLen = 8; - pAd->CommonCfg.ExtRate[0] = 0x0C; // 6 mbps, in units of 0.5 Mbps - pAd->CommonCfg.ExtRate[1] = 0x18; // 12 mbps, in units of 0.5 Mbps - pAd->CommonCfg.ExtRate[2] = 0x30; // 24 mbps, in units of 0.5 Mbps - pAd->CommonCfg.ExtRate[3] = 0x60; // 48 mbps, in units of 0.5 Mbps - pAd->CommonCfg.ExtRateLen = 4; - pAd->CommonCfg.DesireRate[0] = 2; // 1 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[1] = 4; // 2 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[2] = 11; // 5.5 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[3] = 22; // 11 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[4] = 12; // 6 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[5] = 18; // 9 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[6] = 24; // 12 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[7] = 36; // 18 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[8] = 48; // 24 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[9] = 72; // 36 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[10] = 96; // 48 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[11] = 108; // 54 mbps, in units of 0.5 Mbps - break; - - case PHY_11A: -#ifdef DOT11_N_SUPPORT - case PHY_11AN_MIXED: - case PHY_11AGN_MIXED: - case PHY_11N_5G: -#endif // DOT11_N_SUPPORT // - pAd->CommonCfg.SupRate[0] = 0x8C; // 6 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[1] = 0x12; // 9 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[2] = 0x98; // 12 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[3] = 0x24; // 18 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[4] = 0xb0; // 24 mbps, in units of 0.5 Mbps, basic rate - pAd->CommonCfg.SupRate[5] = 0x48; // 36 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[6] = 0x60; // 48 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRate[7] = 0x6c; // 54 mbps, in units of 0.5 Mbps - pAd->CommonCfg.SupRateLen = 8; - pAd->CommonCfg.ExtRateLen = 0; - pAd->CommonCfg.DesireRate[0] = 12; // 6 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[1] = 18; // 9 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[2] = 24; // 12 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[3] = 36; // 18 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[4] = 48; // 24 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[5] = 72; // 36 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[6] = 96; // 48 mbps, in units of 0.5 Mbps - pAd->CommonCfg.DesireRate[7] = 108; // 54 mbps, in units of 0.5 Mbps - //pAd->CommonCfg.HTPhyMode.field.MODE = MODE_OFDM; // This MODE is only FYI. not use - break; - - default: - break; - } - - - pAd->CommonCfg.BandState = UNKNOWN_BAND; -} - - -#ifdef DOT11_N_SUPPORT -/* - ======================================================================== - Routine Description: - Caller ensures we has 802.11n support. - Calls at setting HT from AP/STASetinformation - - Arguments: - pAd - Pointer to our adapter - phymode - - - ======================================================================== -*/ -VOID RTMPSetHT( - IN PRTMP_ADAPTER pAd, - IN OID_SET_HT_PHYMODE *pHTPhyMode) -{ - //ULONG *pmcs; - UINT32 Value = 0; - UCHAR BBPValue = 0; - UCHAR BBP3Value = 0; - UCHAR RxStream = pAd->CommonCfg.RxStream; - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : HT_mode(%d), ExtOffset(%d), MCS(%d), BW(%d), STBC(%d), SHORTGI(%d)\n", - pHTPhyMode->HtMode, pHTPhyMode->ExtOffset, - pHTPhyMode->MCS, pHTPhyMode->BW, - pHTPhyMode->STBC, pHTPhyMode->SHORTGI)); - - // Don't zero supportedHyPhy structure. - RTMPZeroMemory(&pAd->CommonCfg.HtCapability, sizeof(pAd->CommonCfg.HtCapability)); - RTMPZeroMemory(&pAd->CommonCfg.AddHTInfo, sizeof(pAd->CommonCfg.AddHTInfo)); - RTMPZeroMemory(&pAd->CommonCfg.NewExtChanOffset, sizeof(pAd->CommonCfg.NewExtChanOffset)); - RTMPZeroMemory(&pAd->CommonCfg.DesiredHtPhy, sizeof(pAd->CommonCfg.DesiredHtPhy)); - - if (pAd->CommonCfg.bRdg) - { - pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 1; - pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 1; - } - else - { - pAd->CommonCfg.HtCapability.ExtHtCapInfo.PlusHTC = 0; - pAd->CommonCfg.HtCapability.ExtHtCapInfo.RDGSupport = 0; - } - - pAd->CommonCfg.HtCapability.HtCapParm.MaxRAmpduFactor = 3; - pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor = 3; - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : RxBAWinLimit = %d\n", pAd->CommonCfg.BACapability.field.RxBAWinLimit)); - - // Mimo power save, A-MSDU size, - pAd->CommonCfg.DesiredHtPhy.AmsduEnable = (USHORT)pAd->CommonCfg.BACapability.field.AmsduEnable; - pAd->CommonCfg.DesiredHtPhy.AmsduSize = (UCHAR)pAd->CommonCfg.BACapability.field.AmsduSize; - pAd->CommonCfg.DesiredHtPhy.MimoPs = (UCHAR)pAd->CommonCfg.BACapability.field.MMPSmode; - pAd->CommonCfg.DesiredHtPhy.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; - - pAd->CommonCfg.HtCapability.HtCapInfo.AMsduSize = (USHORT)pAd->CommonCfg.BACapability.field.AmsduSize; - pAd->CommonCfg.HtCapability.HtCapInfo.MimoPs = (USHORT)pAd->CommonCfg.BACapability.field.MMPSmode; - pAd->CommonCfg.HtCapability.HtCapParm.MpduDensity = (UCHAR)pAd->CommonCfg.BACapability.field.MpduDensity; - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetHT : AMsduSize = %d, MimoPs = %d, MpduDensity = %d, MaxRAmpduFactor = %d\n", - pAd->CommonCfg.DesiredHtPhy.AmsduSize, - pAd->CommonCfg.DesiredHtPhy.MimoPs, - pAd->CommonCfg.DesiredHtPhy.MpduDensity, - pAd->CommonCfg.DesiredHtPhy.MaxRAmpduFactor)); - - if(pHTPhyMode->HtMode == HTMODE_GF) - { - pAd->CommonCfg.HtCapability.HtCapInfo.GF = 1; - pAd->CommonCfg.DesiredHtPhy.GF = 1; - } - else - pAd->CommonCfg.DesiredHtPhy.GF = 0; - - // Decide Rx MCSSet - switch (RxStream) - { - case 1: - pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff; - pAd->CommonCfg.HtCapability.MCSSet[1] = 0x00; - break; - - case 2: - pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff; - pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff; - break; - - case 3: // 3*3 - pAd->CommonCfg.HtCapability.MCSSet[0] = 0xff; - pAd->CommonCfg.HtCapability.MCSSet[1] = 0xff; - pAd->CommonCfg.HtCapability.MCSSet[2] = 0xff; - break; - } - - if (pAd->CommonCfg.bForty_Mhz_Intolerant && (pAd->CommonCfg.Channel <= 14) && (pHTPhyMode->BW == BW_40) ) - { - pHTPhyMode->BW = BW_20; - pAd->CommonCfg.HtCapability.HtCapInfo.Forty_Mhz_Intolerant = 1; - } - - if(pHTPhyMode->BW == BW_40) - { - pAd->CommonCfg.HtCapability.MCSSet[4] = 0x1; // MCS 32 - pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 1; - if (pAd->CommonCfg.Channel <= 14) - pAd->CommonCfg.HtCapability.HtCapInfo.CCKmodein40 = 1; - - pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 1; - pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 1; - pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = (pHTPhyMode->ExtOffset == EXTCHA_BELOW)? (EXTCHA_BELOW): EXTCHA_ABOVE; - // Set Regsiter for extension channel position. - RTMP_IO_READ32(pAd, TX_BAND_CFG, &Value); - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBP3Value); - if ((pHTPhyMode->ExtOffset == EXTCHA_BELOW)) - { - Value |= 0x1; - BBP3Value |= (0x20); - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); - } - else if ((pHTPhyMode->ExtOffset == EXTCHA_ABOVE)) - { - Value &= 0xfe; - BBP3Value &= (~0x20); - RTMP_IO_WRITE32(pAd, TX_BAND_CFG, Value); - } - - // Turn on BBP 40MHz mode now only as AP . - // Sta can turn on BBP 40MHz after connection with 40MHz AP. Sta only broadcast 40MHz capability before connection. - if ((pAd->OpMode == OPMODE_AP) || INFRA_ON(pAd) || ADHOC_ON(pAd) - ) - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue &= (~0x18); - BBPValue |= 0x10; - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBP3Value); - pAd->CommonCfg.BBPCurrentBW = BW_40; - } - } - else - { - pAd->CommonCfg.HtCapability.HtCapInfo.ChannelWidth = 0; - pAd->CommonCfg.DesiredHtPhy.ChannelWidth = 0; - pAd->CommonCfg.AddHTInfo.AddHtInfo.RecomWidth = 0; - pAd->CommonCfg.AddHTInfo.AddHtInfo.ExtChanOffset = EXTCHA_NONE; - pAd->CommonCfg.CentralChannel = pAd->CommonCfg.Channel; - // Turn on BBP 20MHz mode by request here. - { - RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue); - BBPValue &= (~0x18); - RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue); - pAd->CommonCfg.BBPCurrentBW = BW_20; - } - } - - if(pHTPhyMode->STBC == STBC_USE) - { - pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 1; - pAd->CommonCfg.DesiredHtPhy.TxSTBC = 1; - pAd->CommonCfg.HtCapability.HtCapInfo.RxSTBC = 1; - pAd->CommonCfg.DesiredHtPhy.RxSTBC = 1; - } - else - { - pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; - pAd->CommonCfg.DesiredHtPhy.RxSTBC = 0; - } - -#ifdef RT2870 - /* Frank recommend ,If not, Tx maybe block in high power. Rx has no problem*/ - if(IS_RT3070(pAd) && ((pAd->RfIcType == RFIC_3020) || (pAd->RfIcType == RFIC_2020))) - { - pAd->CommonCfg.HtCapability.HtCapInfo.TxSTBC = 0; - pAd->CommonCfg.DesiredHtPhy.TxSTBC = 0; - } -#endif // RT2870 // - - if(pHTPhyMode->SHORTGI == GI_400) - { - pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 1; - pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 1; - pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 1; - pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 1; - } - else - { - pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor20 = 0; - pAd->CommonCfg.HtCapability.HtCapInfo.ShortGIfor40 = 0; - pAd->CommonCfg.DesiredHtPhy.ShortGIfor20 = 0; - pAd->CommonCfg.DesiredHtPhy.ShortGIfor40 = 0; - } - - // We support link adaptation for unsolicit MCS feedback, set to 2. - pAd->CommonCfg.HtCapability.ExtHtCapInfo.MCSFeedback = MCSFBK_NONE; //MCSFBK_UNSOLICIT; - pAd->CommonCfg.AddHTInfo.ControlChan = pAd->CommonCfg.Channel; - // 1, the extension channel above the control channel. - - // EDCA parameters used for AP's own transmission - if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) - { - pAd->CommonCfg.APEdcaParm.bValid = TRUE; - pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3; - pAd->CommonCfg.APEdcaParm.Aifsn[1] = 7; - pAd->CommonCfg.APEdcaParm.Aifsn[2] = 1; - pAd->CommonCfg.APEdcaParm.Aifsn[3] = 1; - - pAd->CommonCfg.APEdcaParm.Cwmin[0] = 4; - pAd->CommonCfg.APEdcaParm.Cwmin[1] = 4; - pAd->CommonCfg.APEdcaParm.Cwmin[2] = 3; - pAd->CommonCfg.APEdcaParm.Cwmin[3] = 2; - - pAd->CommonCfg.APEdcaParm.Cwmax[0] = 6; - pAd->CommonCfg.APEdcaParm.Cwmax[1] = 10; - pAd->CommonCfg.APEdcaParm.Cwmax[2] = 4; - pAd->CommonCfg.APEdcaParm.Cwmax[3] = 3; - - pAd->CommonCfg.APEdcaParm.Txop[0] = 0; - pAd->CommonCfg.APEdcaParm.Txop[1] = 0; - pAd->CommonCfg.APEdcaParm.Txop[2] = 94; - pAd->CommonCfg.APEdcaParm.Txop[3] = 47; - } - AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm); - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - RTMPSetIndividualHT(pAd, 0); - } -#endif // CONFIG_STA_SUPPORT // - -} - -/* - ======================================================================== - Routine Description: - Caller ensures we has 802.11n support. - Calls at setting HT from AP/STASetinformation - - Arguments: - pAd - Pointer to our adapter - phymode - - - ======================================================================== -*/ -VOID RTMPSetIndividualHT( - IN PRTMP_ADAPTER pAd, - IN UCHAR apidx) -{ - PRT_HT_PHY_INFO pDesired_ht_phy = NULL; - UCHAR TxStream = pAd->CommonCfg.TxStream; - UCHAR DesiredMcs = MCS_AUTO; - - do - { - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo; - DesiredMcs = pAd->StaCfg.DesiredTransmitSetting.field.MCS; - //pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE; - break; - } -#endif // CONFIG_STA_SUPPORT // - } while (FALSE); - - if (pDesired_ht_phy == NULL) - { - DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetIndividualHT: invalid apidx(%d)\n", apidx)); - return; - } - RTMPZeroMemory(pDesired_ht_phy, sizeof(RT_HT_PHY_INFO)); - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPSetIndividualHT : Desired MCS = %d\n", DesiredMcs)); - // Check the validity of MCS - if ((TxStream == 1) && ((DesiredMcs >= MCS_8) && (DesiredMcs <= MCS_15))) - { - DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS(%d) is invalid in 1S, reset it as MCS_7\n", DesiredMcs)); - DesiredMcs = MCS_7; - } - - if ((pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_20) && (DesiredMcs == MCS_32)) - { - DBGPRINT(RT_DEBUG_WARN, ("RTMPSetIndividualHT: MCS_32 is only supported in 40-MHz, reset it as MCS_0\n")); - DesiredMcs = MCS_0; - } - - pDesired_ht_phy->bHtEnable = TRUE; - - // Decide desired Tx MCS - switch (TxStream) - { - case 1: - if (DesiredMcs == MCS_AUTO) - { - pDesired_ht_phy->MCSSet[0]= 0xff; - pDesired_ht_phy->MCSSet[1]= 0x00; - } - else if (DesiredMcs <= MCS_7) - { - pDesired_ht_phy->MCSSet[0]= 1<<DesiredMcs; - pDesired_ht_phy->MCSSet[1]= 0x00; - } - break; - - case 2: - if (DesiredMcs == MCS_AUTO) - { - pDesired_ht_phy->MCSSet[0]= 0xff; - pDesired_ht_phy->MCSSet[1]= 0xff; - } - else if (DesiredMcs <= MCS_15) - { - ULONG mode; - - mode = DesiredMcs / 8; - if (mode < 2) - pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8)); - } - break; - - case 3: // 3*3 - if (DesiredMcs == MCS_AUTO) - { - /* MCS0 ~ MCS23, 3 bytes */ - pDesired_ht_phy->MCSSet[0]= 0xff; - pDesired_ht_phy->MCSSet[1]= 0xff; - pDesired_ht_phy->MCSSet[2]= 0xff; - } - else if (DesiredMcs <= MCS_23) - { - ULONG mode; - - mode = DesiredMcs / 8; - if (mode < 3) - pDesired_ht_phy->MCSSet[mode] = (1 << (DesiredMcs - mode * 8)); - } - break; - } - - if(pAd->CommonCfg.DesiredHtPhy.ChannelWidth == BW_40) - { - if (DesiredMcs == MCS_AUTO || DesiredMcs == MCS_32) - pDesired_ht_phy->MCSSet[4] = 0x1; - } - - // update HT Rate setting - if (pAd->OpMode == OPMODE_STA) - MlmeUpdateHtTxRates(pAd, BSS0); - else - MlmeUpdateHtTxRates(pAd, apidx); -} - - -/* - ======================================================================== - Routine Description: - Update HT IE from our capability. - - Arguments: - Send all HT IE in beacon/probe rsp/assoc rsp/action frame. - - - ======================================================================== -*/ -VOID RTMPUpdateHTIE( - IN RT_HT_CAPABILITY *pRtHt, - IN UCHAR *pMcsSet, - OUT HT_CAPABILITY_IE *pHtCapability, - OUT ADD_HT_INFO_IE *pAddHtInfo) -{ - RTMPZeroMemory(pHtCapability, sizeof(HT_CAPABILITY_IE)); - RTMPZeroMemory(pAddHtInfo, sizeof(ADD_HT_INFO_IE)); - - pHtCapability->HtCapInfo.ChannelWidth = pRtHt->ChannelWidth; - pHtCapability->HtCapInfo.MimoPs = pRtHt->MimoPs; - pHtCapability->HtCapInfo.GF = pRtHt->GF; - pHtCapability->HtCapInfo.ShortGIfor20 = pRtHt->ShortGIfor20; - pHtCapability->HtCapInfo.ShortGIfor40 = pRtHt->ShortGIfor40; - pHtCapability->HtCapInfo.TxSTBC = pRtHt->TxSTBC; - pHtCapability->HtCapInfo.RxSTBC = pRtHt->RxSTBC; - pHtCapability->HtCapInfo.AMsduSize = pRtHt->AmsduSize; - pHtCapability->HtCapParm.MaxRAmpduFactor = pRtHt->MaxRAmpduFactor; - pHtCapability->HtCapParm.MpduDensity = pRtHt->MpduDensity; - - pAddHtInfo->AddHtInfo.ExtChanOffset = pRtHt->ExtChanOffset ; - pAddHtInfo->AddHtInfo.RecomWidth = pRtHt->RecomWidth; - pAddHtInfo->AddHtInfo2.OperaionMode = pRtHt->OperaionMode; - pAddHtInfo->AddHtInfo2.NonGfPresent = pRtHt->NonGfPresent; - RTMPMoveMemory(pAddHtInfo->MCSSet, /*pRtHt->MCSSet*/pMcsSet, 4); // rt2860 only support MCS max=32, no need to copy all 16 uchar. - - DBGPRINT(RT_DEBUG_TRACE,("RTMPUpdateHTIE <== \n")); -} -#endif // DOT11_N_SUPPORT // - -/* - ======================================================================== - Description: - Add Client security information into ASIC WCID table and IVEIV table. - Return: - ======================================================================== -*/ -VOID RTMPAddWcidAttributeEntry( - IN PRTMP_ADAPTER pAd, - IN UCHAR BssIdx, - IN UCHAR KeyIdx, - IN UCHAR CipherAlg, - IN MAC_TABLE_ENTRY *pEntry) -{ - UINT32 WCIDAttri = 0; - USHORT offset; - UCHAR IVEIV = 0; - USHORT Wcid = 0; - - { -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (BssIdx > BSS0) - { - DBGPRINT(RT_DEBUG_ERROR, ("RTMPAddWcidAttributeEntry: The BSS-index(%d) is out of range for Infra link. \n", BssIdx)); - return; - } - - // 1. In ADHOC mode, the AID is wcid number. And NO mesh link exists. - // 2. In Infra mode, the AID:1 MUST be wcid of infra STA. - // the AID:2~ assign to mesh link entry. - if (pEntry && ADHOC_ON(pAd)) - Wcid = pEntry->Aid; - else if (pEntry && INFRA_ON(pAd)) - { -#ifdef QOS_DLS_SUPPORT - if (pEntry->ValidAsDls == TRUE) - Wcid = pEntry->Aid; - else -#endif // QOS_DLS_SUPPORT // - Wcid = BSSID_WCID; - } - else - Wcid = MCAST_WCID; - } -#endif // CONFIG_STA_SUPPORT // - } - - // Update WCID attribute table - offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE); - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - if (pEntry && pEntry->ValidAsMesh) - WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; -#ifdef QOS_DLS_SUPPORT - else if ((pEntry) && (pEntry->ValidAsDls) && - ((CipherAlg == CIPHER_TKIP) || - (CipherAlg == CIPHER_TKIP_NO_MIC) || - (CipherAlg == CIPHER_AES) || - (CipherAlg == CIPHER_NONE))) - WCIDAttri = (CipherAlg<<1) | PAIRWISEKEYTABLE; -#endif // QOS_DLS_SUPPORT // - else - WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE; - } -#endif // CONFIG_STA_SUPPORT // - - RTMP_IO_WRITE32(pAd, offset, WCIDAttri); - - - // Update IV/EIV table - offset = MAC_IVEIV_TABLE_BASE + (Wcid * HW_IVEIV_ENTRY_SIZE); - - // WPA mode - if ((CipherAlg == CIPHER_TKIP) || (CipherAlg == CIPHER_TKIP_NO_MIC) || (CipherAlg == CIPHER_AES)) - { - // Eiv bit on. keyid always is 0 for pairwise key - IVEIV = (KeyIdx <<6) | 0x20; - } - else - { - // WEP KeyIdx is default tx key. - IVEIV = (KeyIdx << 6); - } - - // For key index and ext IV bit, so only need to update the position(offset+3). -#ifdef RT2870 - RTUSBMultiWrite_OneByte(pAd, offset+3, &IVEIV); -#endif // RT2870 // - - DBGPRINT(RT_DEBUG_TRACE,("RTMPAddWcidAttributeEntry: WCID #%d, KeyIndex #%d, Alg=%s\n",Wcid, KeyIdx, CipherName[CipherAlg])); - DBGPRINT(RT_DEBUG_TRACE,(" WCIDAttri = 0x%x \n", WCIDAttri)); - -} - -/* - ========================================================================== - Description: - Parse encryption type -Arguments: - pAdapter Pointer to our adapter - wrq Pointer to the ioctl argument - - Return Value: - None - - Note: - ========================================================================== -*/ -CHAR *GetEncryptType(CHAR enc) -{ - if(enc == Ndis802_11WEPDisabled) - return "NONE"; - if(enc == Ndis802_11WEPEnabled) - return "WEP"; - if(enc == Ndis802_11Encryption2Enabled) - return "TKIP"; - if(enc == Ndis802_11Encryption3Enabled) - return "AES"; - if(enc == Ndis802_11Encryption4Enabled) - return "TKIPAES"; - else - return "UNKNOW"; -} - -CHAR *GetAuthMode(CHAR auth) -{ - if(auth == Ndis802_11AuthModeOpen) - return "OPEN"; - if(auth == Ndis802_11AuthModeShared) - return "SHARED"; - if(auth == Ndis802_11AuthModeAutoSwitch) - return "AUTOWEP"; - if(auth == Ndis802_11AuthModeWPA) - return "WPA"; - if(auth == Ndis802_11AuthModeWPAPSK) - return "WPAPSK"; - if(auth == Ndis802_11AuthModeWPANone) - return "WPANONE"; - if(auth == Ndis802_11AuthModeWPA2) - return "WPA2"; - if(auth == Ndis802_11AuthModeWPA2PSK) - return "WPA2PSK"; - if(auth == Ndis802_11AuthModeWPA1WPA2) - return "WPA1WPA2"; - if(auth == Ndis802_11AuthModeWPA1PSKWPA2PSK) - return "WPA1PSKWPA2PSK"; - - return "UNKNOW"; -} - -#if 1 //#ifndef UCOS -/* - ========================================================================== - Description: - Get site survey results - Arguments: - pAdapter Pointer to our adapter - wrq Pointer to the ioctl argument - - Return Value: - None - - Note: - Usage: - 1.) UI needs to wait 4 seconds after issue a site survey command - 2.) iwpriv ra0 get_site_survey - 3.) UI needs to prepare at least 4096bytes to get the results - ========================================================================== -*/ -#define LINE_LEN (4+33+20+8+10+9+7+3) // Channel+SSID+Bssid+WepStatus+AuthMode+Signal+WiressMode+NetworkType -VOID RTMPIoctlGetSiteSurvey( - IN PRTMP_ADAPTER pAdapter, - IN struct iwreq *wrq) -{ - CHAR *msg; - INT i=0; - INT WaitCnt; - INT Status=0; - CHAR Ssid[MAX_LEN_OF_SSID +1]; - INT Rssi = 0, max_len = LINE_LEN; - UINT Rssi_Quality = 0; - NDIS_802_11_NETWORK_TYPE wireless_mode; - - os_alloc_mem(NULL, (PUCHAR *)&msg, sizeof(CHAR)*((MAX_LEN_OF_BSS_TABLE)*max_len)); - - if (msg == NULL) - { - DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - msg memory alloc fail.\n")); - return; - } - - memset(msg, 0 ,(MAX_LEN_OF_BSS_TABLE)*max_len ); - memset(Ssid, 0 ,(MAX_LEN_OF_SSID +1)); - sprintf(msg,"%s","\n"); - sprintf(msg+strlen(msg),"%-4s%-33s%-20s%-8s%-10s%-9s%-7s%-3s\n", - "Ch", "SSID", "BSSID", "Enc", "Auth", "Siganl(%)", "W-Mode", " NT"); - - - WaitCnt = 0; -#ifdef CONFIG_STA_SUPPORT - pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE; - while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200)) - OS_WAIT(500); -#endif // CONFIG_STA_SUPPORT // - - for(i=0; i<pAdapter->ScanTab.BssNr ;i++) - { - if( pAdapter->ScanTab.BssEntry[i].Channel==0) - break; - - if((strlen(msg)+max_len ) >= IW_SCAN_MAX_DATA) - break; - - //Channel - sprintf(msg+strlen(msg),"%-4d", pAdapter->ScanTab.BssEntry[i].Channel); - //SSID - memcpy(Ssid, pAdapter->ScanTab.BssEntry[i].Ssid, pAdapter->ScanTab.BssEntry[i].SsidLen); - Ssid[pAdapter->ScanTab.BssEntry[i].SsidLen] = '\0'; - sprintf(msg+strlen(msg),"%-33s", Ssid); - //BSSID - sprintf(msg+strlen(msg),"%02x:%02x:%02x:%02x:%02x:%02x ", - pAdapter->ScanTab.BssEntry[i].Bssid[0], - pAdapter->ScanTab.BssEntry[i].Bssid[1], - pAdapter->ScanTab.BssEntry[i].Bssid[2], - pAdapter->ScanTab.BssEntry[i].Bssid[3], - pAdapter->ScanTab.BssEntry[i].Bssid[4], - pAdapter->ScanTab.BssEntry[i].Bssid[5]); - //Encryption Type - sprintf(msg+strlen(msg),"%-8s",GetEncryptType(pAdapter->ScanTab.BssEntry[i].WepStatus)); - //Authentication Mode - if (pAdapter->ScanTab.BssEntry[i].WepStatus == Ndis802_11WEPEnabled) - sprintf(msg+strlen(msg),"%-10s", "UNKNOW"); - else - sprintf(msg+strlen(msg),"%-10s",GetAuthMode(pAdapter->ScanTab.BssEntry[i].AuthMode)); - // Rssi - Rssi = (INT)pAdapter->ScanTab.BssEntry[i].Rssi; - if (Rssi >= -50) - Rssi_Quality = 100; - else if (Rssi >= -80) // between -50 ~ -80dbm - Rssi_Quality = (UINT)(24 + ((Rssi + 80) * 26)/10); - else if (Rssi >= -90) // between -80 ~ -90dbm - Rssi_Quality = (UINT)(((Rssi + 90) * 26)/10); - else // < -84 dbm - Rssi_Quality = 0; - sprintf(msg+strlen(msg),"%-9d", Rssi_Quality); - // Wireless Mode - wireless_mode = NetworkTypeInUseSanity(&pAdapter->ScanTab.BssEntry[i]); - if (wireless_mode == Ndis802_11FH || - wireless_mode == Ndis802_11DS) - sprintf(msg+strlen(msg),"%-7s", "11b"); - else if (wireless_mode == Ndis802_11OFDM5) - sprintf(msg+strlen(msg),"%-7s", "11a"); - else if (wireless_mode == Ndis802_11OFDM5_N) - sprintf(msg+strlen(msg),"%-7s", "11a/n"); - else if (wireless_mode == Ndis802_11OFDM24) - sprintf(msg+strlen(msg),"%-7s", "11b/g"); - else if (wireless_mode == Ndis802_11OFDM24_N) - sprintf(msg+strlen(msg),"%-7s", "11b/g/n"); - else - sprintf(msg+strlen(msg),"%-7s", "unknow"); - //Network Type - if (pAdapter->ScanTab.BssEntry[i].BssType == BSS_ADHOC) - sprintf(msg+strlen(msg),"%-3s", " Ad"); - else - sprintf(msg+strlen(msg),"%-3s", " In"); - - sprintf(msg+strlen(msg),"\n"); - } - -#ifdef CONFIG_STA_SUPPORT - pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE; -#endif // CONFIG_STA_SUPPORT // - wrq->u.data.length = strlen(msg); - Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length); - - DBGPRINT(RT_DEBUG_TRACE, ("RTMPIoctlGetSiteSurvey - wrq->u.data.length = %d\n", wrq->u.data.length)); - os_free_mem(NULL, (PUCHAR)msg); -} - - -#define MAC_LINE_LEN (14+4+4+10+10+10+6+6) // Addr+aid+psm+datatime+rxbyte+txbyte+current tx rate+last tx rate -VOID RTMPIoctlGetMacTable( - IN PRTMP_ADAPTER pAd, - IN struct iwreq *wrq) -{ - INT i; - RT_802_11_MAC_TABLE MacTab; - char *msg; - - MacTab.Num = 0; - for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++) - { - if (pAd->MacTab.Content[i].ValidAsCLI && (pAd->MacTab.Content[i].Sst == SST_ASSOC)) - { - COPY_MAC_ADDR(MacTab.Entry[MacTab.Num].Addr, &pAd->MacTab.Content[i].Addr); - MacTab.Entry[MacTab.Num].Aid = (UCHAR)pAd->MacTab.Content[i].Aid; - MacTab.Entry[MacTab.Num].Psm = pAd->MacTab.Content[i].PsMode; -#ifdef DOT11_N_SUPPORT - MacTab.Entry[MacTab.Num].MimoPs = pAd->MacTab.Content[i].MmpsMode; -#endif // DOT11_N_SUPPORT // - - // Fill in RSSI per entry - MacTab.Entry[MacTab.Num].AvgRssi0 = pAd->MacTab.Content[i].RssiSample.AvgRssi0; - MacTab.Entry[MacTab.Num].AvgRssi1 = pAd->MacTab.Content[i].RssiSample.AvgRssi1; - MacTab.Entry[MacTab.Num].AvgRssi2 = pAd->MacTab.Content[i].RssiSample.AvgRssi2; - - // the connected time per entry - MacTab.Entry[MacTab.Num].ConnectedTime = pAd->MacTab.Content[i].StaConnectTime; -#if 0 // ToDo - MacTab.Entry[MacTab.Num].HSCounter.LastDataPacketTime = pAd->MacTab.Content[i].HSCounter.LastDataPacketTime; - MacTab.Entry[MacTab.Num].HSCounter.TotalRxByteCount = pAd->MacTab.Content[i].HSCounter.TotalRxByteCount; - MacTab.Entry[MacTab.Num].HSCounter.TotalTxByteCount = pAd->MacTab.Content[i].HSCounter.TotalTxByteCount; -#endif - MacTab.Entry[MacTab.Num].TxRate.field.MCS = pAd->MacTab.Content[i].HTPhyMode.field.MCS; - MacTab.Entry[MacTab.Num].TxRate.field.BW = pAd->MacTab.Content[i].HTPhyMode.field.BW; - MacTab.Entry[MacTab.Num].TxRate.field.ShortGI = pAd->MacTab.Content[i].HTPhyMode.field.ShortGI; - MacTab.Entry[MacTab.Num].TxRate.field.STBC = pAd->MacTab.Content[i].HTPhyMode.field.STBC; - MacTab.Entry[MacTab.Num].TxRate.field.rsv = pAd->MacTab.Content[i].HTPhyMode.field.rsv; - MacTab.Entry[MacTab.Num].TxRate.field.MODE = pAd->MacTab.Content[i].HTPhyMode.field.MODE; - MacTab.Entry[MacTab.Num].TxRate.word = pAd->MacTab.Content[i].HTPhyMode.word; - - MacTab.Num += 1; - } - } - wrq->u.data.length = sizeof(RT_802_11_MAC_TABLE); - if (copy_to_user(wrq->u.data.pointer, &MacTab, wrq->u.data.length)) - { - DBGPRINT(RT_DEBUG_TRACE, ("%s: copy_to_user() fail\n", __func__)); - } - - msg = (CHAR *) kmalloc(sizeof(CHAR)*(MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN), MEM_ALLOC_FLAG); - memset(msg, 0 ,MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN ); - sprintf(msg,"%s","\n"); - sprintf(msg+strlen(msg),"%-14s%-4s%-4s%-10s%-10s%-10s%-6s%-6s\n", - "MAC", "AID", "PSM", "LDT", "RxB", "TxB","CTxR", "LTxR"); - - for (i=0; i<MAX_LEN_OF_MAC_TABLE; i++) - { - PMAC_TABLE_ENTRY pEntry = &pAd->MacTab.Content[i]; - if (pEntry->ValidAsCLI && (pEntry->Sst == SST_ASSOC)) - { - if((strlen(msg)+MAC_LINE_LEN ) >= (MAX_LEN_OF_MAC_TABLE*MAC_LINE_LEN) ) - break; - sprintf(msg+strlen(msg),"%02x%02x%02x%02x%02x%02x ", - pEntry->Addr[0], pEntry->Addr[1], pEntry->Addr[2], - pEntry->Addr[3], pEntry->Addr[4], pEntry->Addr[5]); - sprintf(msg+strlen(msg),"%-4d", (int)pEntry->Aid); - sprintf(msg+strlen(msg),"%-4d", (int)pEntry->PsMode); - sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.LastDataPacketTime*/); // ToDo - sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalRxByteCount*/); // ToDo - sprintf(msg+strlen(msg),"%-10d",0/*pAd->MacTab.Content[i].HSCounter.TotalTxByteCount*/); // ToDo - sprintf(msg+strlen(msg),"%-6d",RateIdToMbps[pAd->MacTab.Content[i].CurrTxRate]); - sprintf(msg+strlen(msg),"%-6d\n",0/*RateIdToMbps[pAd->MacTab.Content[i].LastTxRate]*/); // ToDo - } - } - // for compatible with old API just do the printk to console - //wrq->u.data.length = strlen(msg); - //if (copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length)) - { - DBGPRINT(RT_DEBUG_TRACE, ("%s", msg)); - } - - kfree(msg); -} -#endif // UCOS // - -#ifdef DOT11_N_SUPPORT -INT Set_BASetup_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR mac[6], tid; - char *token, sepValue[] = ":", DASH = '-'; - INT i; - MAC_TABLE_ENTRY *pEntry; - -/* - The BASetup inupt string format should be xx:xx:xx:xx:xx:xx-d, - =>The six 2 digit hex-decimal number previous are the Mac address, - =>The seventh decimal number is the tid value. -*/ - //printk("\n%s\n", arg); - - if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. - return FALSE; - - token = strchr(arg, DASH); - if ((token != NULL) && (strlen(token)>1)) - { - tid = simple_strtol((token+1), 0, 10); - if (tid > 15) - return FALSE; - - *token = '\0'; - for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) - { - if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) - return FALSE; - AtoH(token, (PUCHAR)(&mac[i]), 1); - } - if(i != 6) - return FALSE; - - printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x\n", mac[0], mac[1], - mac[2], mac[3], mac[4], mac[5], tid); - - pEntry = MacTableLookup(pAd, mac); - - if (pEntry) { - printk("\nSetup BA Session: Tid = %d\n", tid); - BAOriSessionSetUp(pAd, pEntry, tid, 0, 100, TRUE); - } - - return TRUE; - } - - return FALSE; - -} - -INT Set_BADecline_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG bBADecline; - - bBADecline = simple_strtol(arg, 0, 10); - - if (bBADecline == 0) - { - pAd->CommonCfg.bBADecline = FALSE; - } - else if (bBADecline == 1) - { - pAd->CommonCfg.bBADecline = TRUE; - } - else - { - return FALSE; //Invalid argument - } - - DBGPRINT(RT_DEBUG_TRACE, ("Set_BADecline_Proc::(BADecline=%d)\n", pAd->CommonCfg.bBADecline)); - - return TRUE; -} - -INT Set_BAOriTearDown_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR mac[6], tid; - char *token, sepValue[] = ":", DASH = '-'; - INT i; - MAC_TABLE_ENTRY *pEntry; - - //printk("\n%s\n", arg); -/* - The BAOriTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d, - =>The six 2 digit hex-decimal number previous are the Mac address, - =>The seventh decimal number is the tid value. -*/ - if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. - return FALSE; - - token = strchr(arg, DASH); - if ((token != NULL) && (strlen(token)>1)) - { - tid = simple_strtol((token+1), 0, 10); - if (tid > NUM_OF_TID) - return FALSE; - - *token = '\0'; - for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) - { - if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) - return FALSE; - AtoH(token, (PUCHAR)(&mac[i]), 1); - } - if(i != 6) - return FALSE; - - printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1], - mac[2], mac[3], mac[4], mac[5], tid); - - pEntry = MacTableLookup(pAd, mac); - - if (pEntry) { - printk("\nTear down Ori BA Session: Tid = %d\n", tid); - BAOriSessionTearDown(pAd, pEntry->Aid, tid, FALSE, TRUE); - } - - return TRUE; - } - - return FALSE; - -} - -INT Set_BARecTearDown_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR mac[6], tid; - char *token, sepValue[] = ":", DASH = '-'; - INT i; - MAC_TABLE_ENTRY *pEntry; - - //printk("\n%s\n", arg); -/* - The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d, - =>The six 2 digit hex-decimal number previous are the Mac address, - =>The seventh decimal number is the tid value. -*/ - if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and tid value in decimal format. - return FALSE; - - token = strchr(arg, DASH); - if ((token != NULL) && (strlen(token)>1)) - { - tid = simple_strtol((token+1), 0, 10); - if (tid > NUM_OF_TID) - return FALSE; - - *token = '\0'; - for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) - { - if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) - return FALSE; - AtoH(token, (PUCHAR)(&mac[i]), 1); - } - if(i != 6) - return FALSE; - - printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1], - mac[2], mac[3], mac[4], mac[5], tid); - - pEntry = MacTableLookup(pAd, mac); - - if (pEntry) { - printk("\nTear down Rec BA Session: Tid = %d\n", tid); - BARecSessionTearDown(pAd, pEntry->Aid, tid, FALSE); - } - - return TRUE; - } - - return FALSE; - -} - -INT Set_HtBw_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG HtBw; - - HtBw = simple_strtol(arg, 0, 10); - if (HtBw == BW_40) - pAd->CommonCfg.RegTransmitSetting.field.BW = BW_40; - else if (HtBw == BW_20) - pAd->CommonCfg.RegTransmitSetting.field.BW = BW_20; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBw_Proc::(HtBw=%d)\n", pAd->CommonCfg.RegTransmitSetting.field.BW)); - - return TRUE; -} - -INT Set_HtMcs_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG HtMcs, Mcs_tmp; -#ifdef CONFIG_STA_SUPPORT - BOOLEAN bAutoRate = FALSE; -#endif // CONFIG_STA_SUPPORT // - - Mcs_tmp = simple_strtol(arg, 0, 10); - - if (Mcs_tmp <= 15 || Mcs_tmp == 32) - HtMcs = Mcs_tmp; - else - HtMcs = MCS_AUTO; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - { - pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs; - pAd->StaCfg.bAutoTxRateSwitch = (HtMcs == MCS_AUTO) ? TRUE:FALSE; - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(HtMcs=%d, bAutoTxRateSwitch = %d)\n", - pAd->StaCfg.DesiredTransmitSetting.field.MCS, pAd->StaCfg.bAutoTxRateSwitch)); - - if ((pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) || - (pAd->MacTab.Content[BSSID_WCID].HTPhyMode.field.MODE < MODE_HTMIX)) - { - if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) && - (HtMcs >= 0 && HtMcs <= 3) && - (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_CCK)) - { - RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs] * 1000000)); - } - else if ((pAd->StaCfg.DesiredTransmitSetting.field.MCS != MCS_AUTO) && - (HtMcs >= 0 && HtMcs <= 7) && - (pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode == FIXED_TXMODE_OFDM)) - { - RTMPSetDesiredRates(pAd, (LONG) (RateIdToMbps[HtMcs+4] * 1000000)); - } - else - bAutoRate = TRUE; - - if (bAutoRate) - { - pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO; - RTMPSetDesiredRates(pAd, -1); - } - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMcs_Proc::(FixedTxMode=%d)\n",pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode)); - } - if (ADHOC_ON(pAd)) - return TRUE; - } -#endif // CONFIG_STA_SUPPORT // - - SetCommonHT(pAd); - - return TRUE; -} - -INT Set_HtGi_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG HtGi; - - HtGi = simple_strtol(arg, 0, 10); - - if ( HtGi == GI_400) - pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_400; - else if ( HtGi == GI_800 ) - pAd->CommonCfg.RegTransmitSetting.field.ShortGI = GI_800; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtGi_Proc::(ShortGI=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.ShortGI)); - - return TRUE; -} - - -INT Set_HtTxBASize_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR Size; - - Size = simple_strtol(arg, 0, 10); - - if (Size <=0 || Size >=64) - { - Size = 8; - } - pAd->CommonCfg.TxBASize = Size-1; - DBGPRINT(RT_DEBUG_ERROR, ("Set_HtTxBASize ::(TxBASize= %d)\n", Size)); - - return TRUE; -} - - -INT Set_HtOpMode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (Value == HTMODE_GF) - pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_GF; - else if ( Value == HTMODE_MM ) - pAd->CommonCfg.RegTransmitSetting.field.HTMODE = HTMODE_MM; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtOpMode_Proc::(HtOpMode=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.HTMODE)); - - return TRUE; - -} - -INT Set_HtStbc_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (Value == STBC_USE) - pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_USE; - else if ( Value == STBC_NONE ) - pAd->CommonCfg.RegTransmitSetting.field.STBC = STBC_NONE; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_Stbc_Proc::(HtStbc=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.STBC)); - - return TRUE; -} - -INT Set_HtHtc_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->HTCEnable = FALSE; - else if ( Value ==1 ) - pAd->HTCEnable = TRUE; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtHtc_Proc::(HtHtc=%d)\n",pAd->HTCEnable)); - - return TRUE; -} - -INT Set_HtExtcha_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (Value == 0) - pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_BELOW; - else if ( Value ==1 ) - pAd->CommonCfg.RegTransmitSetting.field.EXTCHA = EXTCHA_ABOVE; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtExtcha_Proc::(HtExtcha=%d)\n",pAd->CommonCfg.RegTransmitSetting.field.EXTCHA)); - - return TRUE; -} - -INT Set_HtMpduDensity_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (Value <=7 && Value >= 0) - pAd->CommonCfg.BACapability.field.MpduDensity = Value; - else - pAd->CommonCfg.BACapability.field.MpduDensity = 4; - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMpduDensity_Proc::(HtMpduDensity=%d)\n",pAd->CommonCfg.BACapability.field.MpduDensity)); - - return TRUE; -} - -INT Set_HtBaWinSize_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - - if (Value >=1 && Value <= 64) - { - pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = Value; - pAd->CommonCfg.BACapability.field.RxBAWinLimit = Value; - } - else - { - pAd->CommonCfg.REGBACapability.field.RxBAWinLimit = 64; - pAd->CommonCfg.BACapability.field.RxBAWinLimit = 64; - } - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtBaWinSize_Proc::(HtBaWinSize=%d)\n",pAd->CommonCfg.BACapability.field.RxBAWinLimit)); - - return TRUE; -} - -INT Set_HtRdg_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (Value == 0) - pAd->CommonCfg.bRdg = FALSE; - else if ( Value ==1 ) - { - pAd->HTCEnable = TRUE; - pAd->CommonCfg.bRdg = TRUE; - } - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtRdg_Proc::(HtRdg=%d)\n",pAd->CommonCfg.bRdg)); - - return TRUE; -} - -INT Set_HtLinkAdapt_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->bLinkAdapt = FALSE; - else if ( Value ==1 ) - { - pAd->HTCEnable = TRUE; - pAd->bLinkAdapt = TRUE; - } - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtLinkAdapt_Proc::(HtLinkAdapt=%d)\n",pAd->bLinkAdapt)); - - return TRUE; -} - -INT Set_HtAmsdu_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->CommonCfg.BACapability.field.AmsduEnable = FALSE; - else if ( Value == 1 ) - pAd->CommonCfg.BACapability.field.AmsduEnable = TRUE; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAmsdu_Proc::(HtAmsdu=%d)\n",pAd->CommonCfg.BACapability.field.AmsduEnable)); - - return TRUE; -} - -INT Set_HtAutoBa_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->CommonCfg.BACapability.field.AutoBA = FALSE; - else if (Value == 1) - pAd->CommonCfg.BACapability.field.AutoBA = TRUE; - else - return FALSE; //Invalid argument - - pAd->CommonCfg.REGBACapability.field.AutoBA = pAd->CommonCfg.BACapability.field.AutoBA; - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtAutoBa_Proc::(HtAutoBa=%d)\n",pAd->CommonCfg.BACapability.field.AutoBA)); - - return TRUE; - -} - -INT Set_HtProtect_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->CommonCfg.bHTProtect = FALSE; - else if (Value == 1) - pAd->CommonCfg.bHTProtect = TRUE; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtProtect_Proc::(HtProtect=%d)\n",pAd->CommonCfg.bHTProtect)); - - return TRUE; -} - -INT Set_SendPSMPAction_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR mac[6], mode; - char *token, sepValue[] = ":", DASH = '-'; - INT i; - MAC_TABLE_ENTRY *pEntry; - - //printk("\n%s\n", arg); -/* - The BARecTearDown inupt string format should be xx:xx:xx:xx:xx:xx-d, - =>The six 2 digit hex-decimal number previous are the Mac address, - =>The seventh decimal number is the mode value. -*/ - if(strlen(arg) < 19) //Mac address acceptable format 01:02:03:04:05:06 length 17 plus the "-" and mode value in decimal format. - return FALSE; - - token = strchr(arg, DASH); - if ((token != NULL) && (strlen(token)>1)) - { - mode = simple_strtol((token+1), 0, 10); - if (mode > MMPS_ENABLE) - return FALSE; - - *token = '\0'; - for (i = 0, token = rstrtok(arg, &sepValue[0]); token; token = rstrtok(NULL, &sepValue[0]), i++) - { - if((strlen(token) != 2) || (!isxdigit(*token)) || (!isxdigit(*(token+1)))) - return FALSE; - AtoH(token, (PUCHAR)(&mac[i]), 1); - } - if(i != 6) - return FALSE; - - printk("\n%02x:%02x:%02x:%02x:%02x:%02x-%02x", mac[0], mac[1], - mac[2], mac[3], mac[4], mac[5], mode); - - pEntry = MacTableLookup(pAd, mac); - - if (pEntry) { - printk("\nSendPSMPAction MIPS mode = %d\n", mode); - SendPSMPAction(pAd, pEntry->Aid, mode); - } - - return TRUE; - } - - return FALSE; - - -} - -INT Set_HtMIMOPSmode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - - if (Value <=3 && Value >= 0) - pAd->CommonCfg.BACapability.field.MMPSmode = Value; - else - pAd->CommonCfg.BACapability.field.MMPSmode = 3; - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMIMOPSmode_Proc::(MIMOPS mode=%d)\n",pAd->CommonCfg.BACapability.field.MMPSmode)); - - return TRUE; -} - - -INT Set_ForceShortGI_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->WIFItestbed.bShortGI = FALSE; - else if (Value == 1) - pAd->WIFItestbed.bShortGI = TRUE; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceShortGI_Proc::(ForceShortGI=%d)\n", pAd->WIFItestbed.bShortGI)); - - return TRUE; -} - - - -INT Set_ForceGF_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->WIFItestbed.bGreenField = FALSE; - else if (Value == 1) - pAd->WIFItestbed.bGreenField = TRUE; - else - return FALSE; //Invalid argument - - SetCommonHT(pAd); - - DBGPRINT(RT_DEBUG_TRACE, ("Set_ForceGF_Proc::(ForceGF=%d)\n", pAd->WIFItestbed.bGreenField)); - - return TRUE; -} - -INT Set_HtMimoPs_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - if (Value == 0) - pAd->CommonCfg.bMIMOPSEnable = FALSE; - else if (Value == 1) - pAd->CommonCfg.bMIMOPSEnable = TRUE; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_HtMimoPs_Proc::(HtMimoPs=%d)\n",pAd->CommonCfg.bMIMOPSEnable)); - - return TRUE; -} -#endif // DOT11_N_SUPPORT // - - -#ifdef DOT11_N_SUPPORT -INT SetCommonHT( - IN PRTMP_ADAPTER pAd) -{ - OID_SET_HT_PHYMODE SetHT; - - if (pAd->CommonCfg.PhyMode < PHY_11ABGN_MIXED) - return FALSE; - - SetHT.PhyMode = pAd->CommonCfg.PhyMode; - SetHT.TransmitNo = ((UCHAR)pAd->Antenna.field.TxPath); - SetHT.HtMode = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.HTMODE; - SetHT.ExtOffset = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.EXTCHA; - SetHT.MCS = MCS_AUTO; - SetHT.BW = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.BW; - SetHT.STBC = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.STBC; - SetHT.SHORTGI = (UCHAR)pAd->CommonCfg.RegTransmitSetting.field.ShortGI; - - RTMPSetHT(pAd, &SetHT); - - return TRUE; -} -#endif // DOT11_N_SUPPORT // - -INT Set_FixedTxMode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - UCHAR fix_tx_mode = FIXED_TXMODE_HT; - - if (strcmp(arg, "OFDM") == 0 || strcmp(arg, "ofdm") == 0) - { - fix_tx_mode = FIXED_TXMODE_OFDM; - } - else if (strcmp(arg, "CCK") == 0 || strcmp(arg, "cck") == 0) - { - fix_tx_mode = FIXED_TXMODE_CCK; - } - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode; -#endif // CONFIG_STA_SUPPORT // - - DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode)); - - return TRUE; -} - -#ifdef CONFIG_APSTA_MIXED_SUPPORT -INT Set_OpMode_Proc( - IN PRTMP_ADAPTER pAd, - IN PUCHAR arg) -{ - ULONG Value; - - Value = simple_strtol(arg, 0, 10); - -#ifdef RT2870 - if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_START_UP)) -#endif // RT2870 // - { - DBGPRINT(RT_DEBUG_ERROR, ("Can not switch operate mode on interface up !! \n")); - return FALSE; - } - - if (Value == 0) - pAd->OpMode = OPMODE_STA; - else if (Value == 1) - pAd->OpMode = OPMODE_AP; - else - return FALSE; //Invalid argument - - DBGPRINT(RT_DEBUG_TRACE, ("Set_OpMode_Proc::(OpMode=%s)\n", pAd->OpMode == 1 ? "AP Mode" : "STA Mode")); - - return TRUE; -} -#endif // CONFIG_APSTA_MIXED_SUPPORT // - - -///////////////////////////////////////////////////////////////////////// -PCHAR RTMPGetRalinkAuthModeStr( - IN NDIS_802_11_AUTHENTICATION_MODE authMode) -{ - switch(authMode) - { - case Ndis802_11AuthModeOpen: - return "OPEN"; - case Ndis802_11AuthModeWPAPSK: - return "WPAPSK"; - case Ndis802_11AuthModeShared: - return "SHARED"; - case Ndis802_11AuthModeWPA: - return "WPA"; - case Ndis802_11AuthModeWPA2: - return "WPA2"; - case Ndis802_11AuthModeWPA2PSK: - return "WPA2PSK"; - case Ndis802_11AuthModeWPA1PSKWPA2PSK: - return "WPAPSKWPA2PSK"; - case Ndis802_11AuthModeWPA1WPA2: - return "WPA1WPA2"; - case Ndis802_11AuthModeWPANone: - return "WPANONE"; - default: - return "UNKNOW"; - } -} - -PCHAR RTMPGetRalinkEncryModeStr( - IN USHORT encryMode) -{ - switch(encryMode) - { - case Ndis802_11WEPDisabled: - return "NONE"; - case Ndis802_11WEPEnabled: - return "WEP"; - case Ndis802_11Encryption2Enabled: - return "TKIP"; - case Ndis802_11Encryption3Enabled: - return "AES"; - case Ndis802_11Encryption4Enabled: - return "TKIPAES"; - default: - return "UNKNOW"; - } -} - -INT RTMPShowCfgValue( - IN PRTMP_ADAPTER pAd, - IN PUCHAR pName, - IN PUCHAR pBuf) -{ - INT Status = 0; - - for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++) - { - if (!strcmp(pName, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name)) - { - if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->show_proc(pAd, pBuf)) - Status = -EINVAL; - break; //Exit for loop. - } - } - - if(PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name == NULL) - { - sprintf(pBuf, "\n"); - for (PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC = RTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name; PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC++) - sprintf(pBuf, "%s%s\n", pBuf, PRTMP_PRIVATE_STA_SHOW_CFG_VALUE_PROC->name); - } - - return Status; -} - -INT Show_SSID_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid); -#endif // CONFIG_STA_SUPPORT // - return 0; -} - -INT Show_WirelessMode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->CommonCfg.PhyMode) - { - case PHY_11BG_MIXED: - sprintf(pBuf, "\t11B/G"); - break; - case PHY_11B: - sprintf(pBuf, "\t11B"); - break; - case PHY_11A: - sprintf(pBuf, "\t11A"); - break; - case PHY_11ABG_MIXED: - sprintf(pBuf, "\t11A/B/G"); - break; - case PHY_11G: - sprintf(pBuf, "\t11G"); - break; -#ifdef DOT11_N_SUPPORT - case PHY_11ABGN_MIXED: - sprintf(pBuf, "\t11A/B/G/N"); - break; - case PHY_11N_2_4G: - sprintf(pBuf, "\t11N only with 2.4G"); - break; - case PHY_11GN_MIXED: - sprintf(pBuf, "\t11G/N"); - break; - case PHY_11AN_MIXED: - sprintf(pBuf, "\t11A/N"); - break; - case PHY_11BGN_MIXED: - sprintf(pBuf, "\t11B/G/N"); - break; - case PHY_11AGN_MIXED: - sprintf(pBuf, "\t11A/G/N"); - break; - case PHY_11N_5G: - sprintf(pBuf, "\t11N only with 5G"); - break; -#endif // DOT11_N_SUPPORT // - default: - sprintf(pBuf, "\tUnknow Value(%d)", pAd->CommonCfg.PhyMode); - break; - } - return 0; -} - - -INT Show_TxBurst_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.bEnableTxBurst ? "TRUE":"FALSE"); - return 0; -} - -INT Show_TxPreamble_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->CommonCfg.TxPreamble) - { - case Rt802_11PreambleShort: - sprintf(pBuf, "\tShort"); - break; - case Rt802_11PreambleLong: - sprintf(pBuf, "\tLong"); - break; - case Rt802_11PreambleAuto: - sprintf(pBuf, "\tAuto"); - break; - default: - sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.TxPreamble); - break; - } - - return 0; -} - -INT Show_TxPower_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%lu", pAd->CommonCfg.TxPowerPercentage); - return 0; -} - -INT Show_Channel_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%d", pAd->CommonCfg.Channel); - return 0; -} - -INT Show_BGProtection_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->CommonCfg.UseBGProtection) - { - case 1: //Always On - sprintf(pBuf, "\tON"); - break; - case 2: //Always OFF - sprintf(pBuf, "\tOFF"); - break; - case 0: //AUTO - sprintf(pBuf, "\tAuto"); - break; - default: - sprintf(pBuf, "\tUnknow Value(%lu)", pAd->CommonCfg.UseBGProtection); - break; - } - return 0; -} - -INT Show_RTSThreshold_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%u", pAd->CommonCfg.RtsThreshold); - return 0; -} - -INT Show_FragThreshold_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%u", pAd->CommonCfg.FragmentThreshold); - return 0; -} - -#ifdef DOT11_N_SUPPORT -INT Show_HtBw_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - if (pAd->CommonCfg.RegTransmitSetting.field.BW == BW_40) - { - sprintf(pBuf, "\t40 MHz"); - } - else - { - sprintf(pBuf, "\t20 MHz"); - } - return 0; -} - -INT Show_HtMcs_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS); -#endif // CONFIG_STA_SUPPORT // - return 0; -} - -INT Show_HtGi_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->CommonCfg.RegTransmitSetting.field.ShortGI) - { - case GI_400: - sprintf(pBuf, "\tGI_400"); - break; - case GI_800: - sprintf(pBuf, "\tGI_800"); - break; - default: - sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.ShortGI); - break; - } - return 0; -} - -INT Show_HtOpMode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->CommonCfg.RegTransmitSetting.field.HTMODE) - { - case HTMODE_GF: - sprintf(pBuf, "\tGF"); - break; - case HTMODE_MM: - sprintf(pBuf, "\tMM"); - break; - default: - sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.HTMODE); - break; - } - return 0; -} - -INT Show_HtExtcha_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->CommonCfg.RegTransmitSetting.field.EXTCHA) - { - case EXTCHA_BELOW: - sprintf(pBuf, "\tBelow"); - break; - case EXTCHA_ABOVE: - sprintf(pBuf, "\tAbove"); - break; - default: - sprintf(pBuf, "\tUnknow Value(%u)", pAd->CommonCfg.RegTransmitSetting.field.EXTCHA); - break; - } - return 0; -} - - -INT Show_HtMpduDensity_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.MpduDensity); - return 0; -} - -INT Show_HtBaWinSize_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%u", pAd->CommonCfg.BACapability.field.RxBAWinLimit); - return 0; -} - -INT Show_HtRdg_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.bRdg ? "TRUE":"FALSE"); - return 0; -} - -INT Show_HtAmsdu_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AmsduEnable ? "TRUE":"FALSE"); - return 0; -} - -INT Show_HtAutoBa_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.BACapability.field.AutoBA ? "TRUE":"FALSE"); - return 0; -} -#endif // DOT11_N_SUPPORT // - -INT Show_CountryRegion_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegion); - return 0; -} - -INT Show_CountryRegionABand_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%d", pAd->CommonCfg.CountryRegionForABand); - return 0; -} - -INT Show_CountryCode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.CountryCode); - return 0; -} - -#ifdef AGGREGATION_SUPPORT -INT Show_PktAggregate_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.bAggregationCapable ? "TRUE":"FALSE"); - return 0; -} -#endif // AGGREGATION_SUPPORT // - -#ifdef WMM_SUPPORT -INT Show_WmmCapable_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE"); -#endif // CONFIG_STA_SUPPORT // - - return 0; -} -#endif // WMM_SUPPORT // - -INT Show_IEEE80211H_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - sprintf(pBuf, "\t%s", pAd->CommonCfg.bIEEE80211H ? "TRUE":"FALSE"); - return 0; -} - -#ifdef CONFIG_STA_SUPPORT -INT Show_NetworkType_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - switch(pAd->StaCfg.BssType) - { - case BSS_ADHOC: - sprintf(pBuf, "\tAdhoc"); - break; - case BSS_INFRA: - sprintf(pBuf, "\tInfra"); - break; - case BSS_ANY: - sprintf(pBuf, "\tAny"); - break; - case BSS_MONITOR: - sprintf(pBuf, "\tMonitor"); - break; - default: - sprintf(pBuf, "\tUnknow Value(%d)", pAd->StaCfg.BssType); - break; - } - return 0; -} -#endif // CONFIG_STA_SUPPORT // - -INT Show_AuthMode_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - NDIS_802_11_AUTHENTICATION_MODE AuthMode = Ndis802_11AuthModeOpen; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - AuthMode = pAd->StaCfg.AuthMode; -#endif // CONFIG_STA_SUPPORT // - - if ((AuthMode >= Ndis802_11AuthModeOpen) && - (AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK)) - sprintf(pBuf, "\t%s", RTMPGetRalinkAuthModeStr(AuthMode)); - else - sprintf(pBuf, "\tUnknow Value(%d)", AuthMode); - - return 0; -} - -INT Show_EncrypType_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - NDIS_802_11_WEP_STATUS WepStatus = Ndis802_11WEPDisabled; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - WepStatus = pAd->StaCfg.WepStatus; -#endif // CONFIG_STA_SUPPORT // - - if ((WepStatus >= Ndis802_11WEPEnabled) && - (WepStatus <= Ndis802_11Encryption4KeyAbsent)) - sprintf(pBuf, "\t%s", RTMPGetRalinkEncryModeStr(WepStatus)); - else - sprintf(pBuf, "\tUnknow Value(%d)", WepStatus); - - return 0; -} - -INT Show_DefaultKeyID_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - UCHAR DefaultKeyId = 0; - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - DefaultKeyId = pAd->StaCfg.DefaultKeyId; -#endif // CONFIG_STA_SUPPORT // - - sprintf(pBuf, "\t%d", DefaultKeyId); - - return 0; -} - -INT Show_WepKey_Proc( - IN PRTMP_ADAPTER pAd, - IN INT KeyIdx, - OUT PUCHAR pBuf) -{ - UCHAR Key[16] = {0}, KeyLength = 0; - INT index = BSS0; - - KeyLength = pAd->SharedKey[index][KeyIdx].KeyLen; - NdisMoveMemory(Key, pAd->SharedKey[index][KeyIdx].Key, KeyLength); - - //check key string is ASCII or not - if (RTMPCheckStrPrintAble(Key, KeyLength)) - sprintf(pBuf, "\t%s", Key); - else - { - int idx; - sprintf(pBuf, "\t"); - for (idx = 0; idx < KeyLength; idx++) - sprintf(pBuf+strlen(pBuf), "%02X", Key[idx]); - } - return 0; -} - -INT Show_Key1_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - Show_WepKey_Proc(pAd, 0, pBuf); - return 0; -} - -INT Show_Key2_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - Show_WepKey_Proc(pAd, 1, pBuf); - return 0; -} - -INT Show_Key3_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - Show_WepKey_Proc(pAd, 2, pBuf); - return 0; -} - -INT Show_Key4_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - Show_WepKey_Proc(pAd, 3, pBuf); - return 0; -} - -INT Show_WPAPSK_Proc( - IN PRTMP_ADAPTER pAd, - OUT PUCHAR pBuf) -{ - INT idx; - UCHAR PMK[32] = {0}; - - -#ifdef CONFIG_STA_SUPPORT - IF_DEV_CONFIG_OPMODE_ON_STA(pAd) - NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32); -#endif // CONFIG_STA_SUPPORT // - - sprintf(pBuf, "\tPMK = "); - for (idx = 0; idx < 32; idx++) - sprintf(pBuf+strlen(pBuf), "%02X", PMK[idx]); - - return 0; -} - +#include "../../rt2860/common/cmm_info.c" |