aboutsummaryrefslogtreecommitdiff
path: root/arch/x86/kernel/entry_64.S
diff options
context:
space:
mode:
Diffstat (limited to 'arch/x86/kernel/entry_64.S')
-rw-r--r--arch/x86/kernel/entry_64.S1172
1 files changed, 1172 insertions, 0 deletions
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
new file mode 100644
index 00000000000..1d232e5f565
--- /dev/null
+++ b/arch/x86/kernel/entry_64.S
@@ -0,0 +1,1172 @@
+/*
+ * linux/arch/x86_64/entry.S
+ *
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ * Copyright (C) 2000, 2001, 2002 Andi Kleen SuSE Labs
+ * Copyright (C) 2000 Pavel Machek <pavel@suse.cz>
+ */
+
+/*
+ * entry.S contains the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after an interrupt and after each system call.
+ *
+ * Normal syscalls and interrupts don't save a full stack frame, this is
+ * only done for syscall tracing, signals or fork/exec et.al.
+ *
+ * A note on terminology:
+ * - top of stack: Architecture defined interrupt frame from SS to RIP
+ * at the top of the kernel process stack.
+ * - partial stack frame: partially saved registers upto R11.
+ * - full stack frame: Like partial stack frame, but all register saved.
+ *
+ * Some macro usage:
+ * - CFI macros are used to generate dwarf2 unwind information for better
+ * backtraces. They don't change any code.
+ * - SAVE_ALL/RESTORE_ALL - Save/restore all registers
+ * - SAVE_ARGS/RESTORE_ARGS - Save/restore registers that C functions modify.
+ * There are unfortunately lots of special cases where some registers
+ * not touched. The macro is a big mess that should be cleaned up.
+ * - SAVE_REST/RESTORE_REST - Handle the registers not saved by SAVE_ARGS.
+ * Gives a full stack frame.
+ * - ENTRY/END Define functions in the symbol table.
+ * - FIXUP_TOP_OF_STACK/RESTORE_TOP_OF_STACK - Fix up the hardware stack
+ * frame that is otherwise undefined after a SYSCALL
+ * - TRACE_IRQ_* - Trace hard interrupt state for lock debugging.
+ * - errorentry/paranoidentry/zeroentry - Define exception entry points.
+ */
+
+#include <linux/linkage.h>
+#include <asm/segment.h>
+#include <asm/cache.h>
+#include <asm/errno.h>
+#include <asm/dwarf2.h>
+#include <asm/calling.h>
+#include <asm/asm-offsets.h>
+#include <asm/msr.h>
+#include <asm/unistd.h>
+#include <asm/thread_info.h>
+#include <asm/hw_irq.h>
+#include <asm/page.h>
+#include <asm/irqflags.h>
+
+ .code64
+
+#ifndef CONFIG_PREEMPT
+#define retint_kernel retint_restore_args
+#endif
+
+
+.macro TRACE_IRQS_IRETQ offset=ARGOFFSET
+#ifdef CONFIG_TRACE_IRQFLAGS
+ bt $9,EFLAGS-\offset(%rsp) /* interrupts off? */
+ jnc 1f
+ TRACE_IRQS_ON
+1:
+#endif
+.endm
+
+/*
+ * C code is not supposed to know about undefined top of stack. Every time
+ * a C function with an pt_regs argument is called from the SYSCALL based
+ * fast path FIXUP_TOP_OF_STACK is needed.
+ * RESTORE_TOP_OF_STACK syncs the syscall state after any possible ptregs
+ * manipulation.
+ */
+
+ /* %rsp:at FRAMEEND */
+ .macro FIXUP_TOP_OF_STACK tmp
+ movq %gs:pda_oldrsp,\tmp
+ movq \tmp,RSP(%rsp)
+ movq $__USER_DS,SS(%rsp)
+ movq $__USER_CS,CS(%rsp)
+ movq $-1,RCX(%rsp)
+ movq R11(%rsp),\tmp /* get eflags */
+ movq \tmp,EFLAGS(%rsp)
+ .endm
+
+ .macro RESTORE_TOP_OF_STACK tmp,offset=0
+ movq RSP-\offset(%rsp),\tmp
+ movq \tmp,%gs:pda_oldrsp
+ movq EFLAGS-\offset(%rsp),\tmp
+ movq \tmp,R11-\offset(%rsp)
+ .endm
+
+ .macro FAKE_STACK_FRAME child_rip
+ /* push in order ss, rsp, eflags, cs, rip */
+ xorl %eax, %eax
+ pushq %rax /* ss */
+ CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET ss,0*/
+ pushq %rax /* rsp */
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rsp,0
+ pushq $(1<<9) /* eflags - interrupts on */
+ CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET rflags,0*/
+ pushq $__KERNEL_CS /* cs */
+ CFI_ADJUST_CFA_OFFSET 8
+ /*CFI_REL_OFFSET cs,0*/
+ pushq \child_rip /* rip */
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rip,0
+ pushq %rax /* orig rax */
+ CFI_ADJUST_CFA_OFFSET 8
+ .endm
+
+ .macro UNFAKE_STACK_FRAME
+ addq $8*6, %rsp
+ CFI_ADJUST_CFA_OFFSET -(6*8)
+ .endm
+
+ .macro CFI_DEFAULT_STACK start=1
+ .if \start
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,SS+8
+ .else
+ CFI_DEF_CFA_OFFSET SS+8
+ .endif
+ CFI_REL_OFFSET r15,R15
+ CFI_REL_OFFSET r14,R14
+ CFI_REL_OFFSET r13,R13
+ CFI_REL_OFFSET r12,R12
+ CFI_REL_OFFSET rbp,RBP
+ CFI_REL_OFFSET rbx,RBX
+ CFI_REL_OFFSET r11,R11
+ CFI_REL_OFFSET r10,R10
+ CFI_REL_OFFSET r9,R9
+ CFI_REL_OFFSET r8,R8
+ CFI_REL_OFFSET rax,RAX
+ CFI_REL_OFFSET rcx,RCX
+ CFI_REL_OFFSET rdx,RDX
+ CFI_REL_OFFSET rsi,RSI
+ CFI_REL_OFFSET rdi,RDI
+ CFI_REL_OFFSET rip,RIP
+ /*CFI_REL_OFFSET cs,CS*/
+ /*CFI_REL_OFFSET rflags,EFLAGS*/
+ CFI_REL_OFFSET rsp,RSP
+ /*CFI_REL_OFFSET ss,SS*/
+ .endm
+/*
+ * A newly forked process directly context switches into this.
+ */
+/* rdi: prev */
+ENTRY(ret_from_fork)
+ CFI_DEFAULT_STACK
+ push kernel_eflags(%rip)
+ CFI_ADJUST_CFA_OFFSET 4
+ popf # reset kernel eflags
+ CFI_ADJUST_CFA_OFFSET -4
+ call schedule_tail
+ GET_THREAD_INFO(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+ jnz rff_trace
+rff_action:
+ RESTORE_REST
+ testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
+ je int_ret_from_sys_call
+ testl $_TIF_IA32,threadinfo_flags(%rcx)
+ jnz int_ret_from_sys_call
+ RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
+ jmp ret_from_sys_call
+rff_trace:
+ movq %rsp,%rdi
+ call syscall_trace_leave
+ GET_THREAD_INFO(%rcx)
+ jmp rff_action
+ CFI_ENDPROC
+END(ret_from_fork)
+
+/*
+ * System call entry. Upto 6 arguments in registers are supported.
+ *
+ * SYSCALL does not save anything on the stack and does not change the
+ * stack pointer.
+ */
+
+/*
+ * Register setup:
+ * rax system call number
+ * rdi arg0
+ * rcx return address for syscall/sysret, C arg3
+ * rsi arg1
+ * rdx arg2
+ * r10 arg3 (--> moved to rcx for C)
+ * r8 arg4
+ * r9 arg5
+ * r11 eflags for syscall/sysret, temporary for C
+ * r12-r15,rbp,rbx saved by C code, not touched.
+ *
+ * Interrupts are off on entry.
+ * Only called from user space.
+ *
+ * XXX if we had a free scratch register we could save the RSP into the stack frame
+ * and report it properly in ps. Unfortunately we haven't.
+ *
+ * When user can change the frames always force IRET. That is because
+ * it deals with uncanonical addresses better. SYSRET has trouble
+ * with them due to bugs in both AMD and Intel CPUs.
+ */
+
+ENTRY(system_call)
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,PDA_STACKOFFSET
+ CFI_REGISTER rip,rcx
+ /*CFI_REGISTER rflags,r11*/
+ swapgs
+ movq %rsp,%gs:pda_oldrsp
+ movq %gs:pda_kernelstack,%rsp
+ /*
+ * No need to follow this irqs off/on section - it's straight
+ * and short:
+ */
+ sti
+ SAVE_ARGS 8,1
+ movq %rax,ORIG_RAX-ARGOFFSET(%rsp)
+ movq %rcx,RIP-ARGOFFSET(%rsp)
+ CFI_REL_OFFSET rip,RIP-ARGOFFSET
+ GET_THREAD_INFO(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+ jnz tracesys
+ cmpq $__NR_syscall_max,%rax
+ ja badsys
+ movq %r10,%rcx
+ call *sys_call_table(,%rax,8) # XXX: rip relative
+ movq %rax,RAX-ARGOFFSET(%rsp)
+/*
+ * Syscall return path ending with SYSRET (fast path)
+ * Has incomplete stack frame and undefined top of stack.
+ */
+ret_from_sys_call:
+ movl $_TIF_ALLWORK_MASK,%edi
+ /* edi: flagmask */
+sysret_check:
+ GET_THREAD_INFO(%rcx)
+ cli
+ TRACE_IRQS_OFF
+ movl threadinfo_flags(%rcx),%edx
+ andl %edi,%edx
+ jnz sysret_careful
+ CFI_REMEMBER_STATE
+ /*
+ * sysretq will re-enable interrupts:
+ */
+ TRACE_IRQS_ON
+ movq RIP-ARGOFFSET(%rsp),%rcx
+ CFI_REGISTER rip,rcx
+ RESTORE_ARGS 0,-ARG_SKIP,1
+ /*CFI_REGISTER rflags,r11*/
+ movq %gs:pda_oldrsp,%rsp
+ swapgs
+ sysretq
+
+ CFI_RESTORE_STATE
+ /* Handle reschedules */
+ /* edx: work, edi: workmask */
+sysret_careful:
+ bt $TIF_NEED_RESCHED,%edx
+ jnc sysret_signal
+ TRACE_IRQS_ON
+ sti
+ pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
+ call schedule
+ popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
+ jmp sysret_check
+
+ /* Handle a signal */
+sysret_signal:
+ TRACE_IRQS_ON
+ sti
+ testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
+ jz 1f
+
+ /* Really a signal */
+ /* edx: work flags (arg3) */
+ leaq do_notify_resume(%rip),%rax
+ leaq -ARGOFFSET(%rsp),%rdi # &pt_regs -> arg1
+ xorl %esi,%esi # oldset -> arg2
+ call ptregscall_common
+1: movl $_TIF_NEED_RESCHED,%edi
+ /* Use IRET because user could have changed frame. This
+ works because ptregscall_common has called FIXUP_TOP_OF_STACK. */
+ cli
+ TRACE_IRQS_OFF
+ jmp int_with_check
+
+badsys:
+ movq $-ENOSYS,RAX-ARGOFFSET(%rsp)
+ jmp ret_from_sys_call
+
+ /* Do syscall tracing */
+tracesys:
+ SAVE_REST
+ movq $-ENOSYS,RAX(%rsp)
+ FIXUP_TOP_OF_STACK %rdi
+ movq %rsp,%rdi
+ call syscall_trace_enter
+ LOAD_ARGS ARGOFFSET /* reload args from stack in case ptrace changed it */
+ RESTORE_REST
+ cmpq $__NR_syscall_max,%rax
+ movq $-ENOSYS,%rcx
+ cmova %rcx,%rax
+ ja 1f
+ movq %r10,%rcx /* fixup for C */
+ call *sys_call_table(,%rax,8)
+1: movq %rax,RAX-ARGOFFSET(%rsp)
+ /* Use IRET because user could have changed frame */
+
+/*
+ * Syscall return path ending with IRET.
+ * Has correct top of stack, but partial stack frame.
+ */
+ .globl int_ret_from_sys_call
+int_ret_from_sys_call:
+ cli
+ TRACE_IRQS_OFF
+ testl $3,CS-ARGOFFSET(%rsp)
+ je retint_restore_args
+ movl $_TIF_ALLWORK_MASK,%edi
+ /* edi: mask to check */
+int_with_check:
+ GET_THREAD_INFO(%rcx)
+ movl threadinfo_flags(%rcx),%edx
+ andl %edi,%edx
+ jnz int_careful
+ andl $~TS_COMPAT,threadinfo_status(%rcx)
+ jmp retint_swapgs
+
+ /* Either reschedule or signal or syscall exit tracking needed. */
+ /* First do a reschedule test. */
+ /* edx: work, edi: workmask */
+int_careful:
+ bt $TIF_NEED_RESCHED,%edx
+ jnc int_very_careful
+ TRACE_IRQS_ON
+ sti
+ pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
+ call schedule
+ popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
+ cli
+ TRACE_IRQS_OFF
+ jmp int_with_check
+
+ /* handle signals and tracing -- both require a full stack frame */
+int_very_careful:
+ TRACE_IRQS_ON
+ sti
+ SAVE_REST
+ /* Check for syscall exit trace */
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edx
+ jz int_signal
+ pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
+ leaq 8(%rsp),%rdi # &ptregs -> arg1
+ call syscall_trace_leave
+ popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
+ andl $~(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP),%edi
+ jmp int_restore_rest
+
+int_signal:
+ testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
+ jz 1f
+ movq %rsp,%rdi # &ptregs -> arg1
+ xorl %esi,%esi # oldset -> arg2
+ call do_notify_resume
+1: movl $_TIF_NEED_RESCHED,%edi
+int_restore_rest:
+ RESTORE_REST
+ cli
+ TRACE_IRQS_OFF
+ jmp int_with_check
+ CFI_ENDPROC
+END(system_call)
+
+/*
+ * Certain special system calls that need to save a complete full stack frame.
+ */
+
+ .macro PTREGSCALL label,func,arg
+ .globl \label
+\label:
+ leaq \func(%rip),%rax
+ leaq -ARGOFFSET+8(%rsp),\arg /* 8 for return address */
+ jmp ptregscall_common
+END(\label)
+ .endm
+
+ CFI_STARTPROC
+
+ PTREGSCALL stub_clone, sys_clone, %r8
+ PTREGSCALL stub_fork, sys_fork, %rdi
+ PTREGSCALL stub_vfork, sys_vfork, %rdi
+ PTREGSCALL stub_rt_sigsuspend, sys_rt_sigsuspend, %rdx
+ PTREGSCALL stub_sigaltstack, sys_sigaltstack, %rdx
+ PTREGSCALL stub_iopl, sys_iopl, %rsi
+
+ENTRY(ptregscall_common)
+ popq %r11
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_REGISTER rip, r11
+ SAVE_REST
+ movq %r11, %r15
+ CFI_REGISTER rip, r15
+ FIXUP_TOP_OF_STACK %r11
+ call *%rax
+ RESTORE_TOP_OF_STACK %r11
+ movq %r15, %r11
+ CFI_REGISTER rip, r11
+ RESTORE_REST
+ pushq %r11
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rip, 0
+ ret
+ CFI_ENDPROC
+END(ptregscall_common)
+
+ENTRY(stub_execve)
+ CFI_STARTPROC
+ popq %r11
+ CFI_ADJUST_CFA_OFFSET -8
+ CFI_REGISTER rip, r11
+ SAVE_REST
+ FIXUP_TOP_OF_STACK %r11
+ call sys_execve
+ RESTORE_TOP_OF_STACK %r11
+ movq %rax,RAX(%rsp)
+ RESTORE_REST
+ jmp int_ret_from_sys_call
+ CFI_ENDPROC
+END(stub_execve)
+
+/*
+ * sigreturn is special because it needs to restore all registers on return.
+ * This cannot be done with SYSRET, so use the IRET return path instead.
+ */
+ENTRY(stub_rt_sigreturn)
+ CFI_STARTPROC
+ addq $8, %rsp
+ CFI_ADJUST_CFA_OFFSET -8
+ SAVE_REST
+ movq %rsp,%rdi
+ FIXUP_TOP_OF_STACK %r11
+ call sys_rt_sigreturn
+ movq %rax,RAX(%rsp) # fixme, this could be done at the higher layer
+ RESTORE_REST
+ jmp int_ret_from_sys_call
+ CFI_ENDPROC
+END(stub_rt_sigreturn)
+
+/*
+ * initial frame state for interrupts and exceptions
+ */
+ .macro _frame ref
+ CFI_STARTPROC simple
+ CFI_SIGNAL_FRAME
+ CFI_DEF_CFA rsp,SS+8-\ref
+ /*CFI_REL_OFFSET ss,SS-\ref*/
+ CFI_REL_OFFSET rsp,RSP-\ref
+ /*CFI_REL_OFFSET rflags,EFLAGS-\ref*/
+ /*CFI_REL_OFFSET cs,CS-\ref*/
+ CFI_REL_OFFSET rip,RIP-\ref
+ .endm
+
+/* initial frame state for interrupts (and exceptions without error code) */
+#define INTR_FRAME _frame RIP
+/* initial frame state for exceptions with error code (and interrupts with
+ vector already pushed) */
+#define XCPT_FRAME _frame ORIG_RAX
+
+/*
+ * Interrupt entry/exit.
+ *
+ * Interrupt entry points save only callee clobbered registers in fast path.
+ *
+ * Entry runs with interrupts off.
+ */
+
+/* 0(%rsp): interrupt number */
+ .macro interrupt func
+ cld
+ SAVE_ARGS
+ leaq -ARGOFFSET(%rsp),%rdi # arg1 for handler
+ pushq %rbp
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbp, 0
+ movq %rsp,%rbp
+ CFI_DEF_CFA_REGISTER rbp
+ testl $3,CS(%rdi)
+ je 1f
+ swapgs
+ /* irqcount is used to check if a CPU is already on an interrupt
+ stack or not. While this is essentially redundant with preempt_count
+ it is a little cheaper to use a separate counter in the PDA
+ (short of moving irq_enter into assembly, which would be too
+ much work) */
+1: incl %gs:pda_irqcount
+ cmoveq %gs:pda_irqstackptr,%rsp
+ push %rbp # backlink for old unwinder
+ /*
+ * We entered an interrupt context - irqs are off:
+ */
+ TRACE_IRQS_OFF
+ call \func
+ .endm
+
+ENTRY(common_interrupt)
+ XCPT_FRAME
+ interrupt do_IRQ
+ /* 0(%rsp): oldrsp-ARGOFFSET */
+ret_from_intr:
+ cli
+ TRACE_IRQS_OFF
+ decl %gs:pda_irqcount
+ leaveq
+ CFI_DEF_CFA_REGISTER rsp
+ CFI_ADJUST_CFA_OFFSET -8
+exit_intr:
+ GET_THREAD_INFO(%rcx)
+ testl $3,CS-ARGOFFSET(%rsp)
+ je retint_kernel
+
+ /* Interrupt came from user space */
+ /*
+ * Has a correct top of stack, but a partial stack frame
+ * %rcx: thread info. Interrupts off.
+ */
+retint_with_reschedule:
+ movl $_TIF_WORK_MASK,%edi
+retint_check:
+ movl threadinfo_flags(%rcx),%edx
+ andl %edi,%edx
+ CFI_REMEMBER_STATE
+ jnz retint_careful
+retint_swapgs:
+ /*
+ * The iretq could re-enable interrupts:
+ */
+ cli
+ TRACE_IRQS_IRETQ
+ swapgs
+ jmp restore_args
+
+retint_restore_args:
+ cli
+ /*
+ * The iretq could re-enable interrupts:
+ */
+ TRACE_IRQS_IRETQ
+restore_args:
+ RESTORE_ARGS 0,8,0
+iret_label:
+ iretq
+
+ .section __ex_table,"a"
+ .quad iret_label,bad_iret
+ .previous
+ .section .fixup,"ax"
+ /* force a signal here? this matches i386 behaviour */
+ /* running with kernel gs */
+bad_iret:
+ movq $11,%rdi /* SIGSEGV */
+ TRACE_IRQS_ON
+ sti
+ jmp do_exit
+ .previous
+
+ /* edi: workmask, edx: work */
+retint_careful:
+ CFI_RESTORE_STATE
+ bt $TIF_NEED_RESCHED,%edx
+ jnc retint_signal
+ TRACE_IRQS_ON
+ sti
+ pushq %rdi
+ CFI_ADJUST_CFA_OFFSET 8
+ call schedule
+ popq %rdi
+ CFI_ADJUST_CFA_OFFSET -8
+ GET_THREAD_INFO(%rcx)
+ cli
+ TRACE_IRQS_OFF
+ jmp retint_check
+
+retint_signal:
+ testl $(_TIF_SIGPENDING|_TIF_SINGLESTEP|_TIF_MCE_NOTIFY),%edx
+ jz retint_swapgs
+ TRACE_IRQS_ON
+ sti
+ SAVE_REST
+ movq $-1,ORIG_RAX(%rsp)
+ xorl %esi,%esi # oldset
+ movq %rsp,%rdi # &pt_regs
+ call do_notify_resume
+ RESTORE_REST
+ cli
+ TRACE_IRQS_OFF
+ movl $_TIF_NEED_RESCHED,%edi
+ GET_THREAD_INFO(%rcx)
+ jmp retint_check
+
+#ifdef CONFIG_PREEMPT
+ /* Returning to kernel space. Check if we need preemption */
+ /* rcx: threadinfo. interrupts off. */
+ENTRY(retint_kernel)
+ cmpl $0,threadinfo_preempt_count(%rcx)
+ jnz retint_restore_args
+ bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+ jnc retint_restore_args
+ bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
+ jnc retint_restore_args
+ call preempt_schedule_irq
+ jmp exit_intr
+#endif
+
+ CFI_ENDPROC
+END(common_interrupt)
+
+/*
+ * APIC interrupts.
+ */
+ .macro apicinterrupt num,func
+ INTR_FRAME
+ pushq $~(\num)
+ CFI_ADJUST_CFA_OFFSET 8
+ interrupt \func
+ jmp ret_from_intr
+ CFI_ENDPROC
+ .endm
+
+ENTRY(thermal_interrupt)
+ apicinterrupt THERMAL_APIC_VECTOR,smp_thermal_interrupt
+END(thermal_interrupt)
+
+ENTRY(threshold_interrupt)
+ apicinterrupt THRESHOLD_APIC_VECTOR,mce_threshold_interrupt
+END(threshold_interrupt)
+
+#ifdef CONFIG_SMP
+ENTRY(reschedule_interrupt)
+ apicinterrupt RESCHEDULE_VECTOR,smp_reschedule_interrupt
+END(reschedule_interrupt)
+
+ .macro INVALIDATE_ENTRY num
+ENTRY(invalidate_interrupt\num)
+ apicinterrupt INVALIDATE_TLB_VECTOR_START+\num,smp_invalidate_interrupt
+END(invalidate_interrupt\num)
+ .endm
+
+ INVALIDATE_ENTRY 0
+ INVALIDATE_ENTRY 1
+ INVALIDATE_ENTRY 2
+ INVALIDATE_ENTRY 3
+ INVALIDATE_ENTRY 4
+ INVALIDATE_ENTRY 5
+ INVALIDATE_ENTRY 6
+ INVALIDATE_ENTRY 7
+
+ENTRY(call_function_interrupt)
+ apicinterrupt CALL_FUNCTION_VECTOR,smp_call_function_interrupt
+END(call_function_interrupt)
+ENTRY(irq_move_cleanup_interrupt)
+ apicinterrupt IRQ_MOVE_CLEANUP_VECTOR,smp_irq_move_cleanup_interrupt
+END(irq_move_cleanup_interrupt)
+#endif
+
+ENTRY(apic_timer_interrupt)
+ apicinterrupt LOCAL_TIMER_VECTOR,smp_apic_timer_interrupt
+END(apic_timer_interrupt)
+
+ENTRY(error_interrupt)
+ apicinterrupt ERROR_APIC_VECTOR,smp_error_interrupt
+END(error_interrupt)
+
+ENTRY(spurious_interrupt)
+ apicinterrupt SPURIOUS_APIC_VECTOR,smp_spurious_interrupt
+END(spurious_interrupt)
+
+/*
+ * Exception entry points.
+ */
+ .macro zeroentry sym
+ INTR_FRAME
+ pushq $0 /* push error code/oldrax */
+ CFI_ADJUST_CFA_OFFSET 8
+ pushq %rax /* push real oldrax to the rdi slot */
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rax,0
+ leaq \sym(%rip),%rax
+ jmp error_entry
+ CFI_ENDPROC
+ .endm
+
+ .macro errorentry sym
+ XCPT_FRAME
+ pushq %rax
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rax,0
+ leaq \sym(%rip),%rax
+ jmp error_entry
+ CFI_ENDPROC
+ .endm
+
+ /* error code is on the stack already */
+ /* handle NMI like exceptions that can happen everywhere */
+ .macro paranoidentry sym, ist=0, irqtrace=1
+ SAVE_ALL
+ cld
+ movl $1,%ebx
+ movl $MSR_GS_BASE,%ecx
+ rdmsr
+ testl %edx,%edx
+ js 1f
+ swapgs
+ xorl %ebx,%ebx
+1:
+ .if \ist
+ movq %gs:pda_data_offset, %rbp
+ .endif
+ movq %rsp,%rdi
+ movq ORIG_RAX(%rsp),%rsi
+ movq $-1,ORIG_RAX(%rsp)
+ .if \ist
+ subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+ .endif
+ call \sym
+ .if \ist
+ addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp)
+ .endif
+ cli
+ .if \irqtrace
+ TRACE_IRQS_OFF
+ .endif
+ .endm
+
+ /*
+ * "Paranoid" exit path from exception stack.
+ * Paranoid because this is used by NMIs and cannot take
+ * any kernel state for granted.
+ * We don't do kernel preemption checks here, because only
+ * NMI should be common and it does not enable IRQs and
+ * cannot get reschedule ticks.
+ *
+ * "trace" is 0 for the NMI handler only, because irq-tracing
+ * is fundamentally NMI-unsafe. (we cannot change the soft and
+ * hard flags at once, atomically)
+ */
+ .macro paranoidexit trace=1
+ /* ebx: no swapgs flag */
+paranoid_exit\trace:
+ testl %ebx,%ebx /* swapgs needed? */
+ jnz paranoid_restore\trace
+ testl $3,CS(%rsp)
+ jnz paranoid_userspace\trace
+paranoid_swapgs\trace:
+ .if \trace
+ TRACE_IRQS_IRETQ 0
+ .endif
+ swapgs
+paranoid_restore\trace:
+ RESTORE_ALL 8
+ iretq
+paranoid_userspace\trace:
+ GET_THREAD_INFO(%rcx)
+ movl threadinfo_flags(%rcx),%ebx
+ andl $_TIF_WORK_MASK,%ebx
+ jz paranoid_swapgs\trace
+ movq %rsp,%rdi /* &pt_regs */
+ call sync_regs
+ movq %rax,%rsp /* switch stack for scheduling */
+ testl $_TIF_NEED_RESCHED,%ebx
+ jnz paranoid_schedule\trace
+ movl %ebx,%edx /* arg3: thread flags */
+ .if \trace
+ TRACE_IRQS_ON
+ .endif
+ sti
+ xorl %esi,%esi /* arg2: oldset */
+ movq %rsp,%rdi /* arg1: &pt_regs */
+ call do_notify_resume
+ cli
+ .if \trace
+ TRACE_IRQS_OFF
+ .endif
+ jmp paranoid_userspace\trace
+paranoid_schedule\trace:
+ .if \trace
+ TRACE_IRQS_ON
+ .endif
+ sti
+ call schedule
+ cli
+ .if \trace
+ TRACE_IRQS_OFF
+ .endif
+ jmp paranoid_userspace\trace
+ CFI_ENDPROC
+ .endm
+
+/*
+ * Exception entry point. This expects an error code/orig_rax on the stack
+ * and the exception handler in %rax.
+ */
+KPROBE_ENTRY(error_entry)
+ _frame RDI
+ CFI_REL_OFFSET rax,0
+ /* rdi slot contains rax, oldrax contains error code */
+ cld
+ subq $14*8,%rsp
+ CFI_ADJUST_CFA_OFFSET (14*8)
+ movq %rsi,13*8(%rsp)
+ CFI_REL_OFFSET rsi,RSI
+ movq 14*8(%rsp),%rsi /* load rax from rdi slot */
+ CFI_REGISTER rax,rsi
+ movq %rdx,12*8(%rsp)
+ CFI_REL_OFFSET rdx,RDX
+ movq %rcx,11*8(%rsp)
+ CFI_REL_OFFSET rcx,RCX
+ movq %rsi,10*8(%rsp) /* store rax */
+ CFI_REL_OFFSET rax,RAX
+ movq %r8, 9*8(%rsp)
+ CFI_REL_OFFSET r8,R8
+ movq %r9, 8*8(%rsp)
+ CFI_REL_OFFSET r9,R9
+ movq %r10,7*8(%rsp)
+ CFI_REL_OFFSET r10,R10
+ movq %r11,6*8(%rsp)
+ CFI_REL_OFFSET r11,R11
+ movq %rbx,5*8(%rsp)
+ CFI_REL_OFFSET rbx,RBX
+ movq %rbp,4*8(%rsp)
+ CFI_REL_OFFSET rbp,RBP
+ movq %r12,3*8(%rsp)
+ CFI_REL_OFFSET r12,R12
+ movq %r13,2*8(%rsp)
+ CFI_REL_OFFSET r13,R13
+ movq %r14,1*8(%rsp)
+ CFI_REL_OFFSET r14,R14
+ movq %r15,(%rsp)
+ CFI_REL_OFFSET r15,R15
+ xorl %ebx,%ebx
+ testl $3,CS(%rsp)
+ je error_kernelspace
+error_swapgs:
+ swapgs
+error_sti:
+ movq %rdi,RDI(%rsp)
+ CFI_REL_OFFSET rdi,RDI
+ movq %rsp,%rdi
+ movq ORIG_RAX(%rsp),%rsi /* get error code */
+ movq $-1,ORIG_RAX(%rsp)
+ call *%rax
+ /* ebx: no swapgs flag (1: don't need swapgs, 0: need it) */
+error_exit:
+ movl %ebx,%eax
+ RESTORE_REST
+ cli
+ TRACE_IRQS_OFF
+ GET_THREAD_INFO(%rcx)
+ testl %eax,%eax
+ jne retint_kernel
+ movl threadinfo_flags(%rcx),%edx
+ movl $_TIF_WORK_MASK,%edi
+ andl %edi,%edx
+ jnz retint_careful
+ /*
+ * The iret might restore flags:
+ */
+ TRACE_IRQS_IRETQ
+ swapgs
+ RESTORE_ARGS 0,8,0
+ jmp iret_label
+ CFI_ENDPROC
+
+error_kernelspace:
+ incl %ebx
+ /* There are two places in the kernel that can potentially fault with
+ usergs. Handle them here. The exception handlers after
+ iret run with kernel gs again, so don't set the user space flag.
+ B stepping K8s sometimes report an truncated RIP for IRET
+ exceptions returning to compat mode. Check for these here too. */
+ leaq iret_label(%rip),%rbp
+ cmpq %rbp,RIP(%rsp)
+ je error_swapgs
+ movl %ebp,%ebp /* zero extend */
+ cmpq %rbp,RIP(%rsp)
+ je error_swapgs
+ cmpq $gs_change,RIP(%rsp)
+ je error_swapgs
+ jmp error_sti
+KPROBE_END(error_entry)
+
+ /* Reload gs selector with exception handling */
+ /* edi: new selector */
+ENTRY(load_gs_index)
+ CFI_STARTPROC
+ pushf
+ CFI_ADJUST_CFA_OFFSET 8
+ cli
+ swapgs
+gs_change:
+ movl %edi,%gs
+2: mfence /* workaround */
+ swapgs
+ popf
+ CFI_ADJUST_CFA_OFFSET -8
+ ret
+ CFI_ENDPROC
+ENDPROC(load_gs_index)
+
+ .section __ex_table,"a"
+ .align 8
+ .quad gs_change,bad_gs
+ .previous
+ .section .fixup,"ax"
+ /* running with kernelgs */
+bad_gs:
+ swapgs /* switch back to user gs */
+ xorl %eax,%eax
+ movl %eax,%gs
+ jmp 2b
+ .previous
+
+/*
+ * Create a kernel thread.
+ *
+ * C extern interface:
+ * extern long kernel_thread(int (*fn)(void *), void * arg, unsigned long flags)
+ *
+ * asm input arguments:
+ * rdi: fn, rsi: arg, rdx: flags
+ */
+ENTRY(kernel_thread)
+ CFI_STARTPROC
+ FAKE_STACK_FRAME $child_rip
+ SAVE_ALL
+
+ # rdi: flags, rsi: usp, rdx: will be &pt_regs
+ movq %rdx,%rdi
+ orq kernel_thread_flags(%rip),%rdi
+ movq $-1, %rsi
+ movq %rsp, %rdx
+
+ xorl %r8d,%r8d
+ xorl %r9d,%r9d
+
+ # clone now
+ call do_fork
+ movq %rax,RAX(%rsp)
+ xorl %edi,%edi
+
+ /*
+ * It isn't worth to check for reschedule here,
+ * so internally to the x86_64 port you can rely on kernel_thread()
+ * not to reschedule the child before returning, this avoids the need
+ * of hacks for example to fork off the per-CPU idle tasks.
+ * [Hopefully no generic code relies on the reschedule -AK]
+ */
+ RESTORE_ALL
+ UNFAKE_STACK_FRAME
+ ret
+ CFI_ENDPROC
+ENDPROC(kernel_thread)
+
+child_rip:
+ pushq $0 # fake return address
+ CFI_STARTPROC
+ /*
+ * Here we are in the child and the registers are set as they were
+ * at kernel_thread() invocation in the parent.
+ */
+ movq %rdi, %rax
+ movq %rsi, %rdi
+ call *%rax
+ # exit
+ xorl %edi, %edi
+ call do_exit
+ CFI_ENDPROC
+ENDPROC(child_rip)
+
+/*
+ * execve(). This function needs to use IRET, not SYSRET, to set up all state properly.
+ *
+ * C extern interface:
+ * extern long execve(char *name, char **argv, char **envp)
+ *
+ * asm input arguments:
+ * rdi: name, rsi: argv, rdx: envp
+ *
+ * We want to fallback into:
+ * extern long sys_execve(char *name, char **argv,char **envp, struct pt_regs regs)
+ *
+ * do_sys_execve asm fallback arguments:
+ * rdi: name, rsi: argv, rdx: envp, fake frame on the stack
+ */
+ENTRY(kernel_execve)
+ CFI_STARTPROC
+ FAKE_STACK_FRAME $0
+ SAVE_ALL
+ call sys_execve
+ movq %rax, RAX(%rsp)
+ RESTORE_REST
+ testq %rax,%rax
+ je int_ret_from_sys_call
+ RESTORE_ARGS
+ UNFAKE_STACK_FRAME
+ ret
+ CFI_ENDPROC
+ENDPROC(kernel_execve)
+
+KPROBE_ENTRY(page_fault)
+ errorentry do_page_fault
+KPROBE_END(page_fault)
+
+ENTRY(coprocessor_error)
+ zeroentry do_coprocessor_error
+END(coprocessor_error)
+
+ENTRY(simd_coprocessor_error)
+ zeroentry do_simd_coprocessor_error
+END(simd_coprocessor_error)
+
+ENTRY(device_not_available)
+ zeroentry math_state_restore
+END(device_not_available)
+
+ /* runs on exception stack */
+KPROBE_ENTRY(debug)
+ INTR_FRAME
+ pushq $0
+ CFI_ADJUST_CFA_OFFSET 8
+ paranoidentry do_debug, DEBUG_STACK
+ paranoidexit
+KPROBE_END(debug)
+
+ /* runs on exception stack */
+KPROBE_ENTRY(nmi)
+ INTR_FRAME
+ pushq $-1
+ CFI_ADJUST_CFA_OFFSET 8
+ paranoidentry do_nmi, 0, 0
+#ifdef CONFIG_TRACE_IRQFLAGS
+ paranoidexit 0
+#else
+ jmp paranoid_exit1
+ CFI_ENDPROC
+#endif
+KPROBE_END(nmi)
+
+KPROBE_ENTRY(int3)
+ INTR_FRAME
+ pushq $0
+ CFI_ADJUST_CFA_OFFSET 8
+ paranoidentry do_int3, DEBUG_STACK
+ jmp paranoid_exit1
+ CFI_ENDPROC
+KPROBE_END(int3)
+
+ENTRY(overflow)
+ zeroentry do_overflow
+END(overflow)
+
+ENTRY(bounds)
+ zeroentry do_bounds
+END(bounds)
+
+ENTRY(invalid_op)
+ zeroentry do_invalid_op
+END(invalid_op)
+
+ENTRY(coprocessor_segment_overrun)
+ zeroentry do_coprocessor_segment_overrun
+END(coprocessor_segment_overrun)
+
+ENTRY(reserved)
+ zeroentry do_reserved
+END(reserved)
+
+ /* runs on exception stack */
+ENTRY(double_fault)
+ XCPT_FRAME
+ paranoidentry do_double_fault
+ jmp paranoid_exit1
+ CFI_ENDPROC
+END(double_fault)
+
+ENTRY(invalid_TSS)
+ errorentry do_invalid_TSS
+END(invalid_TSS)
+
+ENTRY(segment_not_present)
+ errorentry do_segment_not_present
+END(segment_not_present)
+
+ /* runs on exception stack */
+ENTRY(stack_segment)
+ XCPT_FRAME
+ paranoidentry do_stack_segment
+ jmp paranoid_exit1
+ CFI_ENDPROC
+END(stack_segment)
+
+KPROBE_ENTRY(general_protection)
+ errorentry do_general_protection
+KPROBE_END(general_protection)
+
+ENTRY(alignment_check)
+ errorentry do_alignment_check
+END(alignment_check)
+
+ENTRY(divide_error)
+ zeroentry do_divide_error
+END(divide_error)
+
+ENTRY(spurious_interrupt_bug)
+ zeroentry do_spurious_interrupt_bug
+END(spurious_interrupt_bug)
+
+#ifdef CONFIG_X86_MCE
+ /* runs on exception stack */
+ENTRY(machine_check)
+ INTR_FRAME
+ pushq $0
+ CFI_ADJUST_CFA_OFFSET 8
+ paranoidentry do_machine_check
+ jmp paranoid_exit1
+ CFI_ENDPROC
+END(machine_check)
+#endif
+
+/* Call softirq on interrupt stack. Interrupts are off. */
+ENTRY(call_softirq)
+ CFI_STARTPROC
+ push %rbp
+ CFI_ADJUST_CFA_OFFSET 8
+ CFI_REL_OFFSET rbp,0
+ mov %rsp,%rbp
+ CFI_DEF_CFA_REGISTER rbp
+ incl %gs:pda_irqcount
+ cmove %gs:pda_irqstackptr,%rsp
+ push %rbp # backlink for old unwinder
+ call __do_softirq
+ leaveq
+ CFI_DEF_CFA_REGISTER rsp
+ CFI_ADJUST_CFA_OFFSET -8
+ decl %gs:pda_irqcount
+ ret
+ CFI_ENDPROC
+ENDPROC(call_softirq)
+
+KPROBE_ENTRY(ignore_sysret)
+ CFI_STARTPROC
+ mov $-ENOSYS,%eax
+ sysret
+ CFI_ENDPROC
+ENDPROC(ignore_sysret)