diff options
Diffstat (limited to 'arch/sh/boards/mach-ecovec24/setup.c')
| -rw-r--r-- | arch/sh/boards/mach-ecovec24/setup.c | 70 |
1 files changed, 39 insertions, 31 deletions
diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 1d7b495a7db..2eaeb9e5958 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -231,14 +231,41 @@ static struct platform_device usb1_common_device = { }; /* LCDC */ +const static struct fb_videomode ecovec_lcd_modes[] = { + { + .name = "Panel", + .xres = 800, + .yres = 480, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 70, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + +const static struct fb_videomode ecovec_dvi_modes[] = { + { + .name = "DVI", + .xres = 1280, + .yres = 720, + .left_margin = 220, + .right_margin = 110, + .hsync_len = 40, + .upper_margin = 20, + .lower_margin = 5, + .vsync_len = 5, + .sync = 0, /* hsync and vsync are active low */ + }, +}; + static struct sh_mobile_lcdc_info lcdc_info = { .ch[0] = { .interface_type = RGB18, .chan = LCDC_CHAN_MAINLCD, .bpp = 16, - .lcd_cfg = { - .sync = 0, /* hsync and vsync are active low */ - }, .lcd_size_cfg = { /* 7.0 inch */ .width = 152, .height = 91, @@ -620,7 +647,6 @@ static struct soc_camera_link tw9910_link = { .bus_id = 1, .power = tw9910_power, .board_info = &i2c_camera[0], - .module_name = "tw9910", .priv = &tw9910_info, }; @@ -644,7 +670,6 @@ static struct soc_camera_link mt9t112_link1 = { .power = mt9t112_power1, .bus_id = 0, .board_info = &i2c_camera[1], - .module_name = "mt9t112", .priv = &mt9t112_info1, }; @@ -667,7 +692,6 @@ static struct soc_camera_link mt9t112_link2 = { .power = mt9t112_power2, .bus_id = 1, .board_info = &i2c_camera[2], - .module_name = "mt9t112", .priv = &mt9t112_info2, }; @@ -793,7 +817,6 @@ static struct sh_vou_pdata sh_vou_pdata = { .flags = SH_VOU_HSYNC_LOW | SH_VOU_VSYNC_LOW, .board_info = &ak8813, .i2c_adap = 0, - .module_name = "ak881x", }; static struct resource sh_vou_resources[] = { @@ -1079,33 +1102,18 @@ static int __init arch_setup(void) if (gpio_get_value(GPIO_PTE6)) { /* DVI */ lcdc_info.clock_source = LCDC_CLK_EXTERNAL; - lcdc_info.ch[0].clock_divider = 1, - lcdc_info.ch[0].lcd_cfg.name = "DVI"; - lcdc_info.ch[0].lcd_cfg.xres = 1280; - lcdc_info.ch[0].lcd_cfg.yres = 720; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 40; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].clock_divider = 1; + lcdc_info.ch[0].lcd_cfg = ecovec_dvi_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_dvi_modes); gpio_set_value(GPIO_PTA2, 1); gpio_set_value(GPIO_PTU1, 1); } else { /* Panel */ - lcdc_info.clock_source = LCDC_CLK_PERIPHERAL; - lcdc_info.ch[0].clock_divider = 2, - lcdc_info.ch[0].lcd_cfg.name = "Panel"; - lcdc_info.ch[0].lcd_cfg.xres = 800; - lcdc_info.ch[0].lcd_cfg.yres = 480; - lcdc_info.ch[0].lcd_cfg.left_margin = 220; - lcdc_info.ch[0].lcd_cfg.right_margin = 110; - lcdc_info.ch[0].lcd_cfg.hsync_len = 70; - lcdc_info.ch[0].lcd_cfg.upper_margin = 20; - lcdc_info.ch[0].lcd_cfg.lower_margin = 5; - lcdc_info.ch[0].lcd_cfg.vsync_len = 5; + lcdc_info.ch[0].clock_divider = 2; + lcdc_info.ch[0].lcd_cfg = ecovec_lcd_modes; + lcdc_info.ch[0].num_cfg = ARRAY_SIZE(ecovec_lcd_modes); gpio_set_value(GPIO_PTR1, 1); @@ -1248,14 +1256,14 @@ static int __init arch_setup(void) /* set SPU2 clock to 83.4 MHz */ clk = clk_get(NULL, "spu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 83333333)); clk_put(clk); } /* change parent of FSI B */ clk = clk_get(NULL, "fsib_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_register(&fsimckb_clk); clk_set_parent(clk, &fsimckb_clk); clk_set_rate(clk, 11000); @@ -1273,7 +1281,7 @@ static int __init arch_setup(void) /* set VPU clock to 166 MHz */ clk = clk_get(NULL, "vpu_clk"); - if (clk) { + if (!IS_ERR(clk)) { clk_set_rate(clk, clk_round_rate(clk, 166000000)); clk_put(clk); } |