aboutsummaryrefslogtreecommitdiff
path: root/arch/arm/mach-omap/board-perseus2.c
diff options
context:
space:
mode:
Diffstat (limited to 'arch/arm/mach-omap/board-perseus2.c')
-rw-r--r--arch/arm/mach-omap/board-perseus2.c189
1 files changed, 189 insertions, 0 deletions
diff --git a/arch/arm/mach-omap/board-perseus2.c b/arch/arm/mach-omap/board-perseus2.c
new file mode 100644
index 00000000000..64515aeb49c
--- /dev/null
+++ b/arch/arm/mach-omap/board-perseus2.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap/board-perseus2.c
+ *
+ * Modified from board-generic.c
+ *
+ * Original OMAP730 support by Jean Pihet <j-pihet@ti.com>
+ * Updated for 2.6 by Kevin Hilman <kjh@hilman.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/hardware.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <asm/mach/flash.h>
+#include <asm/mach/map.h>
+
+#include <asm/arch/gpio.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/fpga.h>
+
+#include "common.h"
+
+static struct resource smc91x_resources[] = {
+ [0] = {
+ .start = H2P2_DBG_FPGA_ETHR_START, /* Physical */
+ .end = H2P2_DBG_FPGA_ETHR_START + 0xf,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = INT_730_MPU_EXT_NIRQ,
+ .end = 0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static int __initdata p2_serial_ports[OMAP_MAX_NR_PORTS] = {1, 1, 0};
+
+static struct mtd_partition p2_partitions[] = {
+ /* bootloader (U-Boot, etc) in first sector */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* bootloader params in the next sector */
+ {
+ .name = "params",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_128K,
+ .mask_flags = 0,
+ },
+ /* kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ .mask_flags = 0
+ },
+ /* rest of flash is a file system */
+ {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0
+ },
+};
+
+static struct flash_platform_data p2_flash_data = {
+ .map_name = "cfi_probe",
+ .width = 2,
+ .parts = p2_partitions,
+ .nr_parts = ARRAY_SIZE(p2_partitions),
+};
+
+static struct resource p2_flash_resource = {
+ .start = OMAP_FLASH_0_START,
+ .end = OMAP_FLASH_0_START + OMAP_FLASH_0_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device p2_flash_device = {
+ .name = "omapflash",
+ .id = 0,
+ .dev = {
+ .platform_data = &p2_flash_data,
+ },
+ .num_resources = 1,
+ .resource = &p2_flash_resource,
+};
+
+static struct platform_device smc91x_device = {
+ .name = "smc91x",
+ .id = 0,
+ .num_resources = ARRAY_SIZE(smc91x_resources),
+ .resource = smc91x_resources,
+};
+
+static struct platform_device *devices[] __initdata = {
+ &p2_flash_device,
+ &smc91x_device,
+};
+
+static void __init omap_perseus2_init(void)
+{
+ (void) platform_add_devices(devices, ARRAY_SIZE(devices));
+}
+
+static void __init perseus2_init_smc91x(void)
+{
+ fpga_write(1, H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+ fpga_write(fpga_read(H2P2_DBG_FPGA_LAN_RESET) & ~1,
+ H2P2_DBG_FPGA_LAN_RESET);
+ mdelay(50);
+}
+
+void omap_perseus2_init_irq(void)
+{
+ omap_init_irq();
+ omap_gpio_init();
+ perseus2_init_smc91x();
+}
+
+/* Only FPGA needs to be mapped here. All others are done with ioremap */
+static struct map_desc omap_perseus2_io_desc[] __initdata = {
+ {H2P2_DBG_FPGA_BASE, H2P2_DBG_FPGA_START, H2P2_DBG_FPGA_SIZE,
+ MT_DEVICE},
+};
+
+static void __init omap_perseus2_map_io(void)
+{
+ omap_map_io();
+ iotable_init(omap_perseus2_io_desc,
+ ARRAY_SIZE(omap_perseus2_io_desc));
+
+ /* Early, board-dependent init */
+
+ /*
+ * Hold GSM Reset until needed
+ */
+ omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL);
+
+ /*
+ * UARTs -> done automagically by 8250 driver
+ */
+
+ /*
+ * CSx timings, GPIO Mux ... setup
+ */
+
+ /* Flash: CS0 timings setup */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0);
+ omap_writel(0x00000088, OMAP730_FLASH_ACFG_0);
+
+ /*
+ * Ethernet support trough the debug board
+ * CS1 timings setup
+ */
+ omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1);
+ omap_writel(0x00000000, OMAP730_FLASH_ACFG_1);
+
+ /*
+ * Configure MPU_EXT_NIRQ IO in IO_CONF9 register,
+ * It is used as the Ethernet controller interrupt
+ */
+ omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9);
+ omap_serial_init(p2_serial_ports);
+}
+
+MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2")
+ MAINTAINER("Kevin Hilman <kjh@hilman.org>")
+ BOOT_MEM(0x10000000, 0xfff00000, 0xfef00000)
+ BOOT_PARAMS(0x10000100)
+ MAPIO(omap_perseus2_map_io)
+ INITIRQ(omap_perseus2_init_irq)
+ INIT_MACHINE(omap_perseus2_init)
+ .timer = &omap_timer,
+MACHINE_END